ncurses/ncurses-6.2.dif

---
 aclocal.m4                  |   40 +++++++++-------
 configure                   |   42 +++++++++--------
 include/curses.h.in         |    5 +-
 include/termcap.h.in        |    2 
 include/tic.h               |    4 -
 man/man_db.renames          |    2 
 man/ncurses.3x              |    4 +
 misc/gen-pkgconfig.in       |    8 +++
 misc/terminfo.src           |  107 +++++++++++++++++++++++++++++++++++++-------
 ncurses/Makefile.in         |    2 
 ncurses/run_cmd.sh          |   11 ++++
 ncurses/tinfo/MKfallback.sh |   14 ++++-
 ncurses/tinfo/lib_setup.c   |    3 +
 progs/Makefile.in           |    4 -
 test/test.priv.h            |    4 -
 test/tracemunch             |    2 
 16 files changed, 190 insertions(+), 64 deletions(-)

--- aclocal.m4
+++ aclocal.m4	2021-06-07 07:18:38.416598899 +0000
@@ -639,7 +639,7 @@ AC_CHECK_SIZEOF(bool,,[
 AC_CACHE_CHECK(for type of bool, cf_cv_type_of_bool,[
 	rm -f cf_test.out
 	AC_TRY_RUN([
-#include <stdlib.h>
+//#include <stdlib.h> // conflict with exit declaration
 #include <stdio.h>
 
 #if defined(__cplusplus)
@@ -5784,12 +5784,15 @@ cat >>$cf_edit_man <<CF_EOF
 		echo "? missing rename for \$cf_source"
 		cf_target="\$cf_source"
 	fi
-	cf_target="\$cf_subdir\${section}/\${cf_target}"
-
 CF_EOF
 fi
 
 cat >>$cf_edit_man <<CF_EOF
+for t in \$cf_target; do
+	t="\$cf_subdir\${section}/\${t}"
+CF_EOF
+
+cat >>$cf_edit_man <<CF_EOF
 	sed	-f "$cf_man_alias" \\
 CF_EOF
 
@@ -5799,7 +5802,7 @@ cat >>$cf_edit_man <<CF_EOF
 CF_EOF
 else
 cat >>$cf_edit_man <<CF_EOF
-		< "\$i" >\$TMP
+		< "\$i" | sed -f $srcdir/edit_man.sed >\$TMP
 CF_EOF
 fi
 
@@ -5839,7 +5842,7 @@ cat >>$cf_edit_man <<CF_EOF
 		mv \$TMP.$cf_so_strip \$TMP
 	fi
 	fi
-	cf_target="\$cf_target.$cf_so_strip"
+	t="\$t.$cf_so_strip"
 CF_EOF
 fi
 
@@ -5848,23 +5851,23 @@ case "$MANPAGE_FORMAT" in
 cat >>$cf_edit_man <<CF_EOF
 	if test "\$form" = format ; then
 		# BSDI installs only .0 suffixes in the cat directories
-		cf_target="\`echo \$cf_target|sed -e 's/\\.[[1-9]]\\+[[a-z]]*/.0/'\`"
+		t="\`echo \$t|sed -e 's/\.[[1-9]]\+[[a-z]]*/.0/'\`"
 	fi
 CF_EOF
   ;;
 esac
 
 cat >>$cf_edit_man <<CF_EOF
-	suffix=\`basename "\$cf_target" | sed -e 's%^[[^.]]*%%'\`
+	suffix=\`basename "\$t" | sed -e 's%^[[^.]]*%%'\`
 	if test "\$verb" = installing ; then
-		echo "\$verb \$cf_target"
-		\$INSTALL_DATA \$TMP "\$cf_target"
+		echo "\$verb \$t"
+		\$INSTALL_DATA \$TMP "\$t"
 		test -d "\$cf_subdir\${section}" &&
 		test -n "\$aliases" && (
 			cd "\$cf_subdir\${section}" && (
-				cf_source=\`echo "\$cf_target" |sed -e 's%^.*/\\([[^/]][[^/]]*/[[^/]][[^/]]*$\\)%\\1%'\`
+				cf_source=\`echo "\$t" |sed -e 's%^.*/\\([[^/]][[^/]]*/[[^/]][[^/]]*$\\)%\\1%'\`
 				test -n "$cf_so_strip" && cf_source=\`echo "\$cf_source" |sed -e 's%\\.$cf_so_strip\$%%'\`
-				cf_target=\`basename "\$cf_target"\`
+				t=\`basename "\$t"\`
 				for cf_alias in \$aliases
 				do
 					if test "\$section" = 1 ; then
@@ -5873,7 +5876,7 @@ cat >>$cf_edit_man <<CF_EOF
 
 					if test "$MANPAGE_SYMLINKS" = yes ; then
 						if test -f "\$cf_alias\${suffix}" ; then
-							if ( cmp -s "\$cf_target" "\$cf_alias\${suffix}" )
+							if ( cmp -s "\$t" "\$cf_alias\${suffix}" )
 							then
 								continue
 							fi
@@ -5883,18 +5886,18 @@ CF_EOF
 case "x$LN_S" in
 (*-f)
 cat >>$cf_edit_man <<CF_EOF
-						$LN_S "\$cf_target" "\$cf_alias\${suffix}"
+						$LN_S "\$t" "\$cf_alias\${suffix}"
 CF_EOF
 	;;
 (*)
 cat >>$cf_edit_man <<CF_EOF
 						rm -f "\$cf_alias\${suffix}"
-						$LN_S "\$cf_target" "\$cf_alias\${suffix}"
+						$LN_S "\$t" "\$cf_alias\${suffix}"
 CF_EOF
 	;;
 esac
 cat >>$cf_edit_man <<CF_EOF
-					elif test "\$cf_target" != "\$cf_alias\${suffix}" ; then
+					elif test "\$t" != "\$cf_alias\${suffix}" ; then
 						echo ".so \$cf_source" >\$TMP
 CF_EOF
 if test -n "$cf_compress" ; then
@@ -5914,9 +5917,9 @@ cat >>$cf_edit_man <<CF_EOF
 			)
 		)
 	elif test "\$verb" = removing ; then
-		test -f "\$cf_target" && (
-			echo "\$verb \$cf_target"
-			rm -f "\$cf_target"
+		test -f "\$t" && (
+			echo "\$verb \$t"
+			rm -f "\$t"
 		)
 		test -d "\$cf_subdir\${section}" &&
 		test -n "\$aliases" && (
@@ -5936,6 +5939,7 @@ cat >>$cf_edit_man <<CF_EOF
 #		echo ".hy 0"
 		cat \$TMP
 	fi
+done
 	;;
 esac
 done
--- configure
+++ configure	2021-06-07 07:18:38.420598827 +0000
@@ -5912,7 +5912,7 @@ echo $ECHO_N "checking for an rpath opti
 		fi
 		;;
 	(linux*|gnu*|k*bsd*-gnu|freebsd*)
-		LD_RPATH_OPT="-Wl,-rpath,"
+		LD_RPATH_OPT="-Wl,-rpath-link,"
 		;;
 	(openbsd[2-9].*|mirbsd*)
 		LD_RPATH_OPT="-Wl,-rpath,"
@@ -7514,7 +7514,7 @@ echo "${ECHO_T}$with_pcre2" >&6
 
 if test "x$with_pcre2" != xno ; then
 	cf_with_pcre2_ok=no
-	for cf_with_pcre2 in libpcre2 libpcre2-posix libpcre
+	for cf_with_pcre2 in libpcre2 libpcre2-8 libpcre2-posix libpcre
 	do
 
 if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "$cf_with_pcre2"; then
@@ -14635,12 +14635,15 @@ cat >>$cf_edit_man <<CF_EOF
 		echo "? missing rename for \$cf_source"
 		cf_target="\$cf_source"
 	fi
-	cf_target="\$cf_subdir\${section}/\${cf_target}"
-
 CF_EOF
 fi
 
 cat >>$cf_edit_man <<CF_EOF
+for t in \$cf_target; do
+	t="\$cf_subdir\${section}/\${t}"
+CF_EOF
+
+cat >>$cf_edit_man <<CF_EOF
 	sed	-f "$cf_man_alias" \\
 CF_EOF
 
@@ -14650,7 +14653,7 @@ cat >>$cf_edit_man <<CF_EOF
 CF_EOF
 else
 cat >>$cf_edit_man <<CF_EOF
-		< "\$i" >\$TMP
+		< "\$i" | sed -f $srcdir/edit_man.sed >\$TMP
 CF_EOF
 fi
 
@@ -14690,7 +14693,7 @@ cat >>$cf_edit_man <<CF_EOF
 		mv \$TMP.$cf_so_strip \$TMP
 	fi
 	fi
-	cf_target="\$cf_target.$cf_so_strip"
+	t="\$t.$cf_so_strip"
 CF_EOF
 fi
 
@@ -14699,23 +14702,23 @@ case "$MANPAGE_FORMAT" in
 cat >>$cf_edit_man <<CF_EOF
 	if test "\$form" = format ; then
 		# BSDI installs only .0 suffixes in the cat directories
-		cf_target="\`echo \$cf_target|sed -e 's/\\.[1-9]\\+[a-z]*/.0/'\`"
+		t="\`echo \$t|sed -e 's/\\.[1-9]\\+[a-z]*/.0/'\`"
 	fi
 CF_EOF
   ;;
 esac
 
 cat >>$cf_edit_man <<CF_EOF
-	suffix=\`basename "\$cf_target" | sed -e 's%^[^.]*%%'\`
+	suffix=\`basename "\$t" | sed -e 's%^[^.]*%%'\`
 	if test "\$verb" = installing ; then
-		echo "\$verb \$cf_target"
-		\$INSTALL_DATA \$TMP "\$cf_target"
+		echo "\$verb \$t"
+		\$INSTALL_DATA \$TMP "\$t"
 		test -d "\$cf_subdir\${section}" &&
 		test -n "\$aliases" && (
 			cd "\$cf_subdir\${section}" && (
-				cf_source=\`echo "\$cf_target" |sed -e 's%^.*/\\([^/][^/]*/[^/][^/]*$\\)%\\1%'\`
+				cf_source=\`echo "\$t" |sed -e 's%^.*/\\([^/][^/]*/[^/][^/]*$\\)%\\1%'\`
 				test -n "$cf_so_strip" && cf_source=\`echo "\$cf_source" |sed -e 's%\\.$cf_so_strip\$%%'\`
-				cf_target=\`basename "\$cf_target"\`
+				t=\`basename "\$t"\`
 				for cf_alias in \$aliases
 				do
 					if test "\$section" = 1 ; then
@@ -14724,7 +14727,7 @@ cat >>$cf_edit_man <<CF_EOF
 
 					if test "$MANPAGE_SYMLINKS" = yes ; then
 						if test -f "\$cf_alias\${suffix}" ; then
-							if ( cmp -s "\$cf_target" "\$cf_alias\${suffix}" )
+							if ( cmp -s "\$t" "\$cf_alias\${suffix}" )
 							then
 								continue
 							fi
@@ -14734,18 +14737,18 @@ CF_EOF
 case "x$LN_S" in
 (*-f)
 cat >>$cf_edit_man <<CF_EOF
-						$LN_S "\$cf_target" "\$cf_alias\${suffix}"
+						$LN_S "\$t" "\$cf_alias\${suffix}"
 CF_EOF
 	;;
 (*)
 cat >>$cf_edit_man <<CF_EOF
 						rm -f "\$cf_alias\${suffix}"
-						$LN_S "\$cf_target" "\$cf_alias\${suffix}"
+						$LN_S "\$t" "\$cf_alias\${suffix}"
 CF_EOF
 	;;
 esac
 cat >>$cf_edit_man <<CF_EOF
-					elif test "\$cf_target" != "\$cf_alias\${suffix}" ; then
+					elif test "\$t" != "\$cf_alias\${suffix}" ; then
 						echo ".so \$cf_source" >\$TMP
 CF_EOF
 if test -n "$cf_compress" ; then
@@ -14765,9 +14768,9 @@ cat >>$cf_edit_man <<CF_EOF
 			)
 		)
 	elif test "\$verb" = removing ; then
-		test -f "\$cf_target" && (
-			echo "\$verb \$cf_target"
-			rm -f "\$cf_target"
+		test -f "\$t" && (
+			echo "\$verb \$t"
+			rm -f "\$t"
 		)
 		test -d "\$cf_subdir\${section}" &&
 		test -n "\$aliases" && (
@@ -14787,6 +14790,7 @@ cat >>$cf_edit_man <<CF_EOF
 #		echo ".hy 0"
 		cat \$TMP
 	fi
+done
 	;;
 esac
 done
--- include/curses.h.in
+++ include/curses.h.in	2021-06-07 07:18:38.420598827 +0000
@@ -97,7 +97,7 @@
 
 #ifdef __cplusplus
 #else
-#if @HAVE_STDNORETURN_H@
+#if 0
 #include <stdnoreturn.h>
 #undef GCC_NORETURN
 #define GCC_NORETURN _Noreturn
@@ -226,6 +226,9 @@ typedef @cf_cv_typeof_chtype@ chtype;
 typedef @cf_cv_typeof_mmask_t@ mmask_t;
 #endif
 
+#include <features.h>
+#include <sys/types.h>
+
 /*
  * We need FILE, etc.  Include this before checking any feature symbols.
  */
--- include/termcap.h.in
+++ include/termcap.h.in	2021-06-07 07:18:38.420598827 +0000
@@ -47,6 +47,8 @@ extern "C"
 {
 #endif /* __cplusplus */
 
+#include <features.h>
+#include <termios.h>
 #include <sys/types.h>
 
 #undef  NCURSES_OSPEED
--- include/tic.h
+++ include/tic.h	2021-06-07 07:18:38.420598827 +0000
@@ -237,12 +237,12 @@ struct user_table_entry
  */
 
 /* out-of-band values for representing absent capabilities */
-#define ABSENT_BOOLEAN		((signed char)-1)	/* 255 */
+#define ABSENT_BOOLEAN		(-1)			/* 255 */
 #define ABSENT_NUMERIC		(-1)
 #define ABSENT_STRING		(char *)0
 
 /* out-of-band values for representing cancels */
-#define CANCELLED_BOOLEAN	((signed char)-2)	/* 254 */
+#define CANCELLED_BOOLEAN	(-2)			/* 254 */
 #define CANCELLED_NUMERIC	(-2)
 #define CANCELLED_STRING	(char *)(-1)
 
--- man/man_db.renames
+++ man/man_db.renames	2021-06-07 07:18:38.420598827 +0000
@@ -164,6 +164,7 @@ term.7				term.7
 term_variables.3x		terminfo_variables.3ncurses
 terminfo.5			terminfo.5
 terminfo.\\\*n			terminfo.5
+curs_terminfo.\\\*n		terminfo.5
 tic.1m				tic.1
 toe.1m				toe.1
 tput.1				tput.1
@@ -172,6 +173,7 @@ user_caps.5			user_caps.5
 wresize.3x			wresize.3ncurses
 #
 # Other:
+tack.1				tack.1
 tack.1m				tack.1
 #
 getty.1				getty.8
--- man/ncurses.3x
+++ man/ncurses.3x	2021-06-07 07:18:38.420598827 +0000
@@ -139,6 +139,10 @@ after the shell environment variable \fB
 [See \fBterminfo\fR(\*n) for further details.]
 .SS Datatypes
 .PP
+Beware: the terminal your program is running may or may not have
+the features you expect. Ncurses makes no attempt to check available
+features in advance. This is upon the programmer.
+.PP
 The \fBncurses\fR library permits manipulation of data structures,
 called \fIwindows\fR, which can be thought of as two-dimensional
 arrays of characters representing all or part of a CRT screen.
--- misc/gen-pkgconfig.in
+++ misc/gen-pkgconfig.in	2021-06-07 07:18:38.420598827 +0000
@@ -92,6 +92,9 @@ do
 	-specs*) # ignore linker specs-files which were used to build library
 		continue
 		;;
+	-Wl,--hash-size=*) # ignore hash as gold linker can not do
+		continue
+		;;
 	-Wl,-z,*) # ignore flags used to manipulate shared image
 		continue
 		;;
@@ -183,6 +186,7 @@ do
 	LIBS="-l$name"
 
 	desc="ncurses @NCURSES_MAJOR@.@NCURSES_MINOR@"
+	deps=
 	reqs=
 
 	if [ $name = $MAIN_LIBRARY ]; then
@@ -193,9 +197,11 @@ do
 		desc="$desc terminal interface library"
 	elif expr $name : ".*${CXX_NAME}.*" >/dev/null ; then
 		reqs="$PANEL_LIBRARY${suffix}, $MENU_LIBRARY${suffix}, $FORM_LIBRARY${suffix}, $MAIN_LIBRARY${suffix}"
+		deps="-l$PANEL_LIBRARY -l$MENU_LIBRARY -l$FORM_LIBRARY -l$MAIN_LIBRARY"
 		desc="$desc add-on library"
 	else
 		reqs="$MAIN_LIBRARY${suffix}"
+		deps="-l$MAIN_LIBRARY"
 		desc="$desc add-on library"
 	fi
 
@@ -205,6 +211,8 @@ do
 	   [ $NEED_TINFO != yes ] ; then
 		[ -n "$reqs" ] && reqs="$reqs, "
 		reqs="${reqs}${SUB_LIBRARY}${suffix}"
+		[ -n "$deps" ] && deps="$deps "
+		deps="${deps}-l${SUB_LIBRARY}"
 	fi
 
 	if [ $name = $MAIN_LIBRARY ]
--- misc/terminfo.src
+++ misc/terminfo.src	2021-06-07 07:18:38.424598755 +0000
@@ -305,7 +305,9 @@ dumb|80-column dumb tty,
 	am,
 	cols#80,
 	bel=^G, cr=\r, cud1=\n, ind=\n,
-unknown|unknown terminal type,
+unknown|switch|patch|unknown terminal type,
+	gn, use=dumb,
+net|network|arpanet|dialup|unknown network terminal type,
 	gn, use=dumb,
 lpr|printer|line printer,
 	OTbs, hc, os,
@@ -1013,9 +1015,15 @@ linux-c|linux console 1.3.6+ for older n
 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
 # get a block cursor for cvvis.
 # reported by Frank Heckenbach <frank@g-n-u.de>.
+#
+# Do not use a block cursor, <werner@suse.de>
+# This because many programs do have a workaround for the long time
+# missed cvvis entry. A `\E[?1c' in civis will cause a visible but
+# zero high cusor ... re-add it for kernels 2.6.11+
+#
 linux2.2|linux 2.2.x console,
 	civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
-	cvvis=\E[?25h\E[?8c, use=linux-c-nc,
+	cvvis=\E[?25h\E[?0c, use=linux-c-nc,
 
 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
 #	http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
@@ -1048,6 +1056,7 @@ linux2.6|linux 2.6.x console,
 	acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
 	     yzz{{||}}~~,
 	enacs=\E)0, rmacs=^O,
+	cvvis=\E[?25h\E[?8c,
 	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
 	    %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
 	sgr0=\E[m\017, smacs=^N, use=linux2.2,
@@ -5350,8 +5359,26 @@ xterm-noapp|xterm with cursor keys in no
 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
 	lines#24, use=xterm-old,
 
+# For SuSE Linux: Werner Fink <werner@suse.de>
+# Note that the modern xterm does not use escape sequences
+# for the numbers on the numpad keys in case of switched
+# into application mode and with numlock enabled.
+# To test this, use `tput smkx' and `Ctrl-V + key stroke'
+xterm-suse|xterm terminal emulator (X.Org X11R7.7 Window System with SuSE LINUX), 
+	kbs=\177, kdch1=\E[3~,
+	kDIV=\EOo, kMUL=\EOj, kMIN=\EOm, kPLS=\EOk,
+	kfnd=\E[1~, kslt=\E[4~,
+	use=xterm-new,
+
 # This is xterm for ncurses.
 xterm|xterm terminal emulator (X Window System),
+	use=xterm-suse,
+
+# xterm-debian is identical to xterm-new with the addition of a small
+# VT220-ism regarding the backspace and delete keys; this is mandated by
+# the keyboard configuration section of the Debian Policy Manual.
+xterm-debian|Debian xterm (backspace and delete changed), 
+	kbs=\177, kdch1=\E[3~,
 	use=xterm-new,
 
 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
@@ -5696,7 +5723,7 @@ xterms-sun|small (80x24) xterm with sunF
 
 #### GNOME (VTE)
 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
-gnome-rh62|Gnome terminal,
+gnome-rh62|Gnome terminal on Red Hat,
 	bce,
 	kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
 	use=xterm-color,
@@ -5968,10 +5995,14 @@ mgt|Multi GNOME Terminal,
 #### KDE
 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
 # or not is debatable).
-kvt|KDE terminal,
+kvt-rh|KDE terminal,
 	bce, km@,
 	kdch1=^?, kend=\E[F, khome=\E[H, use=xterm-color,
 
+# This is kvt for SuSE because we do not support BrokenByDesign[tm].
+kvt|KDE terminal,
+	kdch1=\E[3~, use=kvt-rh,
+
 # Konsole 1.0.1 (2001/11/25)
 # (formerly known as kvt)
 #
@@ -6223,7 +6254,7 @@ mlterm3|multi lingual terminal emulator,
 mlterm2|multi lingual terminal emulator,
 	am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
 	colors#8, cols#80, it#8, lines#24, pairs#64,
-	acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
 	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
 	cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
@@ -6300,7 +6331,7 @@ rxvt-basic|rxvt terminal base (X Window
 	enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
 	ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
 	ind=\n, is1=\E[?47l\E=\E[?1l,
-	is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
+	is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^?,
 	kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
 	rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
 	rmul=\E[24m,
@@ -6395,8 +6426,8 @@ rxvt-basic|rxvt terminal base (X Window
 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
 rxvt+pcfkeys|fragment for PC-style fkeys,
 	kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
-	kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
-	kcuf1=\E[C, kcuu1=\E[A, kel=\E[8\^, kend=\E[8~, kf1=\E[11~,
+	kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\EOD, kcud1=\EOB,
+	kcuf1=\EOC, kcuu1=\EOA, kel=\E[8\^, kend=\E[8~, kf1=\E[11~,
 	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
 	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
 	kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
@@ -6486,6 +6517,38 @@ rxvt-cygwin-native|rxvt terminal emulato
 	     \302x\263y\363z\362{\343|\330~\376,
 	use=rxvt-cygwin,
 
+# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
+# Updated: Özgür Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
+# Updated: Marc Lehmann <pcg@goof.com>, 17 Feb 2005
+# Updated: Marc Lehmann <schmorp@schmorp.de>, 04 Nov 2008: change init/reset sequences
+#
+rxvt-unicode|rxvt-unicode terminal (X Window System), 
+	bw, ccc, hs, mc5i, npc, btns#5, colors#88, lm#0, ncv#0, pairs#256, 
+	acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	dsl=\E]2;\007, ech=\E[%p1%dX, enacs=, flash=\E[?5h$<20/>\E[?5l, 
+	fsl=^G, indn=\E[%p1%dS, 
+	initc=\E]4;%p1%d;rgb\:%p2%{65535}%*%{1000}%/%4.4X/%p3%{65535}%*%{1000}%/%4.4X/%p4%{65535}%*%{1000}%/%4.4X\E\\, 
+	is1=\E[!p, 
+	is2=\E[r\E[m\E[2J\E[?7;25h\E[?1;3;4;5;6;9;66;1000;1001;1049l\E[4l, 
+	kIC=\E2$, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, op=\E[39;49m, 
+	rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l, 
+	rmcup=\E[r\E[?1049l, rmkx=\E[?1l\E>, rs1=\Ec, 
+	rs2=\E[r\E[m\E[?7;25h\E[?1;3;4;5;6;9;66;1000;1001;1049l\E[4l, 
+	s2ds=\E*B, s3ds=\E+B, 
+	setab=\E[48;5;%p1%dm, setaf=\E[38;5;%p1%dm, 
+	setb=%?%p1%{7}%>%t\E[48;5;%p1%dm%e\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m%;, 
+	setf=%?%p1%{7}%>%t\E[38;5;%p1%dm%e\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m%;, 
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 
+	sgr0=\E[m\E(B, sitm=\E[3m, smacs=\E(0, smam=\E[?7h, 
+	smcup=\E[?1049h, smkx=\E[?1h\E=, 
+	tsl=\E]2;, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 
+	use=rxvt-basic, 
+
+rxvt-unicode-256color|rxvt-unicode terminal with 256 colors (X Window System),
+	colors#256, 
+	pairs#32767, 
+	use=rxvt-unicode, 
+
 # This variant is supposed to work with rxvt 2.7.7 when compiled with
 # NO_BRIGHTCOLOR defined.  rxvt needs more work...
 rxvt-16color|rxvt with 16 colors like aixterm,
@@ -6550,7 +6613,7 @@ Eterm|Eterm-color|Eterm with xterm-style
 	home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
 	il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E[?47l\E>\E[?1l,
 	is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
-	kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
+	kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^?,
 	kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
 	mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
 	rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
@@ -7588,7 +7651,7 @@ pty|4bsd pseudo teletype,
 # https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
 #
 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
-eterm|gnu emacs term.el terminal emulation,
+eterm-19|gnu emacs term.el terminal emulation,
 	am, mir, xenl,
 	cols#80, lines#24,
 	bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
@@ -7601,6 +7664,13 @@ eterm|gnu emacs term.el terminal emulati
 	rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
 	sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
 	smul=\E[4m,
+eterm|emacs|gnu emacs term.el terminal emulation, 
+	colors#8, pairs#64, 
+	invis=\E[8m, kcub1=\EOD, kcud1=\EOB, 
+	kcuf1=\EOC, kcuu1=\EOA, kend=\E[4~, 
+	khome=\E[1~, knp=\E[6~, kpp=\E[5~, 
+	setab=\E[%p1%{40}%+%dm, setaf=\E[%p1%{30}%+%dm, 
+	use=eterm-19, 
 
 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
@@ -7728,7 +7798,7 @@ screen|VT 100/ANSI X3.64 virtual termina
 	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
 	enacs=\E(B\E)0, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG,
 	ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
-	ind=\n, indn=\E[%p1%dS, is2=\E)0, kbs=^H, kcbt=\E[Z,
+	ind=\n, indn=\E[%p1%dS, is2=\E)0, kbs=^?, kcbt=\E[Z,
 	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
 	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR,
 	kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
@@ -7848,6 +7918,13 @@ screen.xterm-xfree86|screen.xterm-new|sc
 	use=xterm+x11mouse, use=xterm-new,
 #:screen.xterm|screen for modern xterm,
 #:	use=screen.xterm-new,
+screen.xterm|screen customized for modern xterm,
+	bce@, bw,
+	invis@, kIC@, kNXT@, kPRV@, meml@, memu@, rep@,
+	sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
+	    %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
+	E3@, use=screen+italics, use=screen+fkeys,
+	use=xterm+x11mouse, use=xterm-suse,
 # xterm-r6 does not really support khome/kend unless it is propped up by
 # the translations resource.
 screen.xterm-r6|screen customized for X11R6 xterm,
@@ -7935,7 +8012,7 @@ screen2|old VT 100/ANSI X3.64 virtual te
 	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
 	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
 	el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
-	il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+	il1=\E[L, ind=\n, kbs=^?, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
 	kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
 	kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
 	nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
@@ -9871,7 +9948,7 @@ hp700-wy|HP700/41 emulating wyse30,
 	ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
 	sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
 	smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
-hp70092|hp70092a|hp70092A|HP 700/92,
+hp70092|hp70092a|hp70092A|70092|HP 700/92,
 	am, da, db, xhp,
 	cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
 	acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
@@ -17519,7 +17596,7 @@ ibm3101|i3101|IBM 3101-10,
 	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
 	el=\EI, home=\EH, hts=\E0, ind=\n, kcub1=\ED, kcud1=\EB,
 	kcuf1=\EC, kcuu1=\EA, nel=\r\n, tbc=\EH,
-ibm3151|IBM 3151 display,
+ibm3151|i3151|IBM 3151 display,
 	is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
 	sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
 	    %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
@@ -17777,7 +17854,7 @@ lft|lft-pc850|LFT-PC850|IBM LFT PC850 De
 	tbc=\E[3g, use=ecma+index,
 # "Megapel" refers to the display adapter, which was used with the IBM RT
 # aka IBM 6150.
-ibm5081|hft|IBM Megapel Color display,
+ibm5081|ibmmpel|hft|IBM Megapel Color display,
 	acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
 	s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
--- ncurses/Makefile.in
+++ ncurses/Makefile.in	2021-06-07 07:18:38.424598755 +0000
@@ -240,7 +240,7 @@ $(DESTDIR)$(libdir) :
 ../lib : ; mkdir $@
 
 ./fallback.c : $(tinfo)/MKfallback.sh
-	$(SHELL) -e $(tinfo)/MKfallback.sh $(TERMINFO) $(TERMINFO_SRC) "$(TIC_PATH)" "$(INFOCMP_PATH)" $(FALLBACK_LIST) >$@
+	$(SHELL) -e $(srcdir)/run_cmd.sh $(tinfo)/MKfallback.sh $(TERMINFO) $(TERMINFO_SRC) "$(TIC_PATH)" "$(INFOCMP_PATH)" $(FALLBACK_LIST) >$@
 
 ./lib_gen.c : $(base)/MKlib_gen.sh ../include/curses.h
 	$(SHELL) -e $(base)/MKlib_gen.sh "$(CPP) $(CPPFLAGS)" "$(AWK)" generated <../include/curses.h >$@
--- ncurses/run_cmd.sh
+++ ncurses/run_cmd.sh	2021-06-07 07:18:38.424598755 +0000
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+PATH=$PWD/../progs:$PATH
+if test -n "$LD_LIBRARY_PATH"; then
+    LD_LIBRARY_PATH="$PWD/../lib:$LD_LIBRARY_PATH"
+else
+    LD_LIBRARY_PATH="$PWD/../lib"
+fi
+export PATH LD_LIBRARY_PATH
+
+exec ${1+"$@"}
--- ncurses/tinfo/MKfallback.sh
+++ ncurses/tinfo/MKfallback.sh	2021-06-07 07:18:38.424598755 +0000
@@ -66,14 +66,22 @@ if test $# != 0 ; then
 	TERMINFO=`pwd`/$tmp_info
 	export TERMINFO
 
+	test -d "$TERMINFO" || mkdir -p "$TERMINFO"
+
 	TERMINFO_DIRS=$TERMINFO:$terminfo_dir
 	export TERMINFO_DIRS
 
-	"$tic_path" -x "$terminfo_src" >&2
+	"$tic_path" -o "$TERMINFO" -x "$terminfo_src" >&2
 else
 	tmp_info=
 fi
 
+if test -n "$TERMINFO" -a -d "$TERMINFO" ; then
+	infocmp_args="-v1 -A $TERMINFO"
+else
+	infocmp_args="-v1"
+fi
+
 cat <<EOF
 /* This file was generated by $0 */
 
@@ -95,7 +103,7 @@ EOF
 	for x in "$@"
 	do
 		echo "/* $x */"
-		"$infocmp_path" -E "$x" | sed -e 's/\<short\>/NCURSES_INT2/g'
+		"$infocmp_path" $infocmp_args -E "$x" | sed -e 's/\<short\>/NCURSES_INT2/g'
 	done
 
 	cat <<EOF
@@ -106,7 +114,7 @@ EOF
 	for x in "$@"
 	do
 		echo "$comma /* $x */"
-		"$infocmp_path" -e "$x"
+		"$infocmp_path" $infocmp_args -e "$x"
 		comma=","
 	done
 
--- ncurses/tinfo/lib_setup.c
+++ ncurses/tinfo/lib_setup.c	2021-06-07 07:18:38.424598755 +0000
@@ -613,6 +613,9 @@ _nc_locale_breaks_acs(TERMINAL *termp)
     } else if ((value = tigetnum("U8")) >= 0) {
 	result = value;		/* use extension feature */
     } else if ((env = getenv("TERM")) != 0) {
+	char *yast = getenv("YAST_DOES_ACS");
+	if (yast != 0)
+	    return 0;		/* YaST uses always correct font mappings */
 	if (strstr(env, "linux")) {
 	    result = 1;		/* always broken */
 	} else if (strstr(env, "screen") != 0
--- progs/Makefile.in
+++ progs/Makefile.in	2021-06-07 07:18:38.424598755 +0000
@@ -101,7 +101,7 @@ CFLAGS_LIBTOOL	= $(CCFLAGS)
 CFLAGS_NORMAL	= $(CCFLAGS) -DNCURSES_STATIC
 CFLAGS_DEBUG	= $(CCFLAGS) -DNCURSES_STATIC @CC_G_OPT@ -DTRACE
 CFLAGS_PROFILE	= $(CCFLAGS) -DNCURSES_STATIC -pg
-CFLAGS_SHARED	= $(CCFLAGS) @CC_SHARED_OPTS@
+CFLAGS_SHARED	= $(CCFLAGS) -fPIE
 
 CFLAGS_DEFAULT	= $(CFLAGS_@DFT_UPR_MODEL@)
 
@@ -118,7 +118,7 @@ LDFLAGS_LIBTOOL	= $(LDFLAGS) $(CFLAGS_LI
 LDFLAGS_NORMAL	= $(LDFLAGS) $(CFLAGS_NORMAL)
 LDFLAGS_DEBUG	= $(LDFLAGS) $(CFLAGS_DEBUG)
 LDFLAGS_PROFILE	= $(LDFLAGS) $(CFLAGS_PROFILE)
-LDFLAGS_SHARED	= $(LDFLAGS) $(CFLAGS_SHARED) @LD_SHARED_OPTS@
+LDFLAGS_SHARED	= $(LDFLAGS) $(CFLAGS_SHARED) -pie
 
 LDFLAGS_DEFAULT	= $(LDFLAGS_@DFT_UPR_MODEL@)
 
--- test/test.priv.h
+++ test/test.priv.h	2021-06-07 07:18:38.424598755 +0000
@@ -1037,12 +1037,12 @@ extern char *_nc_strstr(const char *, co
 #endif
 
 /* out-of-band values for representing absent capabilities */
-#define ABSENT_BOOLEAN		((signed char)-1)	/* 255 */
+#define ABSENT_BOOLEAN		(char)-1)		/* 255 */
 #define ABSENT_NUMERIC		(-1)
 #define ABSENT_STRING		(char *)0
 
 /* out-of-band values for representing cancels */
-#define CANCELLED_BOOLEAN	((signed char)-2)	/* 254 */
+#define CANCELLED_BOOLEAN	(-2)			/* 254 */
 #define CANCELLED_NUMERIC	(-2)
 #define CANCELLED_STRING	(char *)(-1)
 
--- test/tracemunch
+++ test/tracemunch	2021-06-07 07:18:38.428598683 +0000
@@ -1,4 +1,4 @@
-#!/usr/bin/env perl
+#!/usr/bin/perl
 # $Id: tracemunch,v 1.40 2021/02/13 19:29:12 tom Exp $
 ##############################################################################
 # Copyright 2018-2020,2021 Thomas E. Dickey                                  #