## Path:		Network/File systems/NFS server
## Description:		number of threads for kernel nfs server
## Type:		integer
## Default:		4
## ServiceRestart:	nfsserver
#
# the kernel nfs-server supports multiple server threads
#
USE_KERNEL_NFSD_NUMBER="4"

## Path:		Network/File systems/NFS server
## Description:		use fixed port number for mountd
## Type:		integer
## Default:		""
## ServiceRestart:	nfsserver
#
#  Only set this if you want to start mountd on a fixed
#  port instead of the port assigned by rpc. Only for use
#  to export nfs-filesystems through firewalls.
#
MOUNTD_PORT=""

## Path:                Network/File systems/NFS server
## Description:         GSS security for NFS
## Type:                yesno
## Default:             yes
## ServiceRestart:      nfs nfsserver
#
# Enable RPCSEC_GSS security for NFS (yes/no)
#
NFS_SECURITY_GSS="no"

## Path:                Network/File systems/NFS server
## Description:         NFSv3 server support
## Type:                yesno
## Default:             yes
## ServiceRestart:      nfsserver
#
# Enable NFSv3 server support (yes/no)
# This causes the NFS server to respond to
# NFSv2 and NFSv3 requests.  Only disable this
# if you want to ensure only NFSv4 is used.
#
NFS3_SERVER_SUPPORT="yes"

## Path:                Network/File systems/NFS server
## Description:         NFSv4 protocol support
## Type:                yesno
## Default:             yes
## ServiceRestart:      nfs nfsserver
#
# Enable NFSv4 support (yes/no)
#
NFS4_SUPPORT="yes"

## Path:                Network/File systems/NFS server
## Description:         Network Status Monitor options
## Type:                string
## Default:             ""
#
#
SM_NOTIFY_OPTIONS=""

## Path:                Network/File systems/NFS server
## Description:         Always start NFS services
## Type:                yesno
## Default:             yes
## ServiceRestart       nfs
#
# Always start NFS services (gssd, idmapd), not only if
# there are nfs mounts in /etc/fstab.  This is likely to be
# needed if you use an automounter for NFS.
# Note that the nfs service is no longer enabled by default
# and the command "chkconfig nfs on" is needed to fully enable
# NFS.
#
NFS_START_SERVICES="yes"

## Path:                Network/File systems/NFS server
## Description:         Command line parameters for rpc.statd
## Type:                string
## Default:             ""
#
# Custom parameters for rpc.statd daemon.  Typically this will
#  be used to set the port number (-p).
#
STATD_OPTIONS=""

## Path:                Network/File systems/NFS server
## Description:         Lease time for NFSv4 leases
## Type:                integer
## Default:             ""
#
# Set the lease time for the NFSv4 server.  This allows new locks
# to be taken sooner after a server restart, so it is useful for
# servers which need to recover quickly after a failure, particularly
# in fail-over configurations.  Reducing the lease time can be a
# problem is some clients connect over high latency networks.
# The default is 90 seconds.  A number like 15 might be appropriate
# in a fail-over configuration with all clients on well connected
# low latency links.
NFSV4LEASETIME=""

## Path:                Network/File systems/NFS server
## Description:         Alternate mount point for rpc_pipefs filesystem
## Type:                string
## Default:             ""
#
# In a high-availabilty configuration it is possible that /var/lib/nfs
# is redirected so some shared storage and so it is not convenient to
# mount the rpc_pipefs filesystem at /var/lib/nfs/rpc_pipefs.  In that
# case an alternate mount point can be given here.
RPC_PIPEFS_DIR=""

## Path:                Network/File systems/NFS server
## Description:         Options for svcgssd
## Type:                string
## Default:             ""
#
# Normally svcgssd does not require any option.  However in a
# high-availabilty configuration it can be useful to pass "-n"
# to guide the choice of default credential.  To allow for that
# case or any other requiring options ot svcgssd, they can
# be specified here.
SVCGSSD_OPTIONS=""

## Path:                Network/File systems/NFS server
## Description:         Extra options for nfsd
## Type:                string
## Default:             ""
#
# This setting allows extra options to be specified for NFSD, such as
# -H <shared_hostname> in a high-availability configuration.
NFSD_OPTIONS=""