------------------------------------------------------------------- Thu Oct 19 23:42:57 UTC 2023 - Jan Engelhardt - Update to release 1.0.9 * Custom conntrack timeouts can use time specification with units other than seconds. * Allow combination of dnat with numgen. * Allow for using constants as key in dynamic sets. * Support for matching on the target address of a IPv6 neighbour solicitation/advertisement. * Restore bitwise operations in combination with maps, e.g. jump to chain depending on bitwise operation on packet mark. * Fix crash with log prefix longer that 127 bytes. - Drop merged 0001-Revert-py-replace-distutils-with-setuptools.patch ------------------------------------------------------------------- Fri Jul 14 11:56:43 UTC 2023 - Jan Engelhardt - Update to release 1.0.8 * Support for setting meta and ct mark from other fields in rules, e.g. set meta mark to ip dscp header field. * Enhacements for -o/--optimize to deal with NAT statements, to compact masquerade statements. * Support for stateful statements in anonymous maps, such as counters. * Support for resetting stateful expressions in sets, maps and elements, e.g. counters. * broute support to short-circuit bridge logic from the bridge prerouting hook and pass up packets to the local IP stack. * JSON support for table and chain comments. - Added 0001-Revert-py-replace-distutils-with-setuptools.patch ------------------------------------------------------------------- Mon Mar 13 20:47:53 UTC 2023 - Jan Engelhardt - Update to release 1.0.7 * Support for vxlan/geneve/gre/gretap matching * auto-merge support for partial set element deletion * Allow for NAT mapping with concatenation and ranges * Support for quota in sets ------------------------------------------------------------------- Wed Dec 21 23:47:26 UTC 2022 - Jan Engelhardt - Update to release 1.0.6 * Fix bytecode generation for concatenation of intervals where selectors use different byteorder datatypes, e.g. IPv4 (network byte order). * Fix match of uncommon protocol matches with raw expressions * Unbreak insertion of rules with intervals ("sport { 3478-3497, 16384-16387 }") ------------------------------------------------------------------- Wed Aug 17 19:21:15 UTC 2022 - Dirk Müller - update to 1.0.5: * Fixes for the -o/--optimize, run this --optimize option to automagically compact your ruleset using sets, maps and concatenations * Fix ethernet and vlan concatenations, eg. define a dynamic set which is populated from the packet path * Fix ruleset listing with interface wildcard map * Fix several regressions in the input lexer which broke valid rulesets. * Fix slowdown with large lists of singleton interval elements. * Fix set automerge feature for large lists of singleton interval elements. * Fix bogus error reporting for exact overlaps. * Fix segfault when adding elements to invalid set. * fix device parsing in netdev family in json. ------------------------------------------------------------------- Tue Jun 7 14:55:21 UTC 2022 - Jan Engelhardt - Update to release 1.0.4 * Fixed a segfault in -o/--optimize with unsupported statements. * Bogus datatype mismatch error report in sets was fixed. ------------------------------------------------------------------- Tue May 31 13:34:12 UTC 2022 - Jan Engelhardt - Update to release 1.0.3 * Support for wildcard interface name matching with sets * Support for runtime auto-merge of set elements. * Enhancements for the ruleset optimization -o/--optimize option which allows to coalesce several NAT rules into map. * Support for raw expressions in concatenations. * Support for integer type protocol header fields in concatenations. * Allow to reset TCP options (requires Linux kernel >= 5.18) - Drop 0001-build-add-missing-AM_CPPFLAGS-to-examples.patch ------------------------------------------------------------------- Tue Feb 22 04:39:01 UTC 2022 - Jan Engelhardt - Update to release 1.0.2 * New ruleset optimization -o/--optimize option. * Support for IP and TCP options and SCTP chunks in sets. * Support for tcp fastopen, md5sig and mptcp options. * MP-TCP subtype matching support. * JSON support for flowtables. - Add 0001-build-add-missing-AM_CPPFLAGS-to-examples.patch ------------------------------------------------------------------- Thu Nov 18 22:15:03 UTC 2021 - Jan Engelhardt - Update to release 1.0.1 * Reduce memory footprint when loading large sets/maps. * Speed up reload of large sets/maps. * Speed up listing of specific tables in large ruleset, e.g. large ruleset with ~100k lines. * Speed up --terse option when listing a ruleset large sets/maps. * Print raw payload expression in hexadecimal, e.g. "@ll,0,8 & 0x80 == 0x80" * egress hook support (available since 5.16-rc1). * Allow matching and update bytes at inner header/payload offset (available since 5.16-rc1). ------------------------------------------------------------------- Thu Aug 19 18:06:29 UTC 2021 - Jan Engelhardt - Update to release 1.0.0 * Catch-all set element support. * The command-line option --define is now recognized. * Stateful expressions in maps. * Allow combination of jhash, symhash and numgen expressions with the queue statement. * Allow combination of verdict maps with interval concatenations. ------------------------------------------------------------------- Tue May 25 23:20:59 UTC 2021 - Jan Engelhardt - Update to release 0.9.9 * Flowtable hardware offload support * Support for the table owner flag. * 802.1ad (QinQ) support * cgroupsv2 support. * match on SCTP packet chunks (dependent on Linux 5.14) * Allow to use verdict in set/map typeof definitions ------------------------------------------------------------------- Fri Jan 15 22:28:26 UTC 2021 - Jan Engelhardt - Update to release 0.9.8 * Complete support for matching ICMP header content fields. * Added raw tcp option match support. * Added ability to check for the presence of any tcp option. * Support for rejecting traffic from the ingress chain. ------------------------------------------------------------------- Tue Oct 27 12:08:37 UTC 2020 - Jan Engelhardt - Update to release 0.9.7 * Support for implicit chains * Support for ingress inet chains * Support for reject from prerouting chain * Support for --terse option in json * Support for the reset command with json ------------------------------------------------------------------- Tue Jun 16 13:37:28 UTC 2020 - Jan Engelhardt - Update to release 0.9.6 * Fix two ASAN runtime errors ------------------------------------------------------------------- Sat Jun 6 12:03:35 UTC 2020 - Jan Engelhardt - Update to release 0.9.5 * Support for set counters. * Support for restoring set element counters via nft -f. * Counter support for flowtables. * typeof concatenations support for sets. * Support for concatenated ranges in anonymous sets. * Allow to reject packets with 802.1q from the bridge family. * Support for matching on the conntrack ID. - Drop anonset-crashfix.patch (upstream solved differently) ------------------------------------------------------------------- Thu May 7 11:41:07 UTC 2020 - Jan Engelhardt - Add anonset-crashfix.patch [boo#1171321] ------------------------------------------------------------------- Wed Apr 1 18:48:56 UTC 2020 - Jan Engelhardt - Update to release 0.9.4 * Add a helper for concat expression handling. * Add "typeof" build/parse/print support. ------------------------------------------------------------------- Mon Dec 9 09:39:52 UTC 2019 - Jan Engelhardt - Add json, python [boo#1158723] ------------------------------------------------------------------- Tue Dec 3 09:09:28 UTC 2019 - Jan Engelhardt - Update to release 0.9.3 * meta: Introduce new conditions "time", "day" and "hour". * src: add ability to set/get secmarks to/from connection. * flowtable: add support for named flowtable listing. * flowtable: add support for delete command by handle. * json: add support for element deletion. * Add `-T` as the short option for `--numeric-time`. * meta: add ibrpvid and ibrvproto support ------------------------------------------------------------------- Mon Aug 19 12:37:45 UTC 2019 - Jan Engelhardt - Update to new upstream release 0.9.2 * Transport header port matching, e.g. "th dport 53" * Support for matching on IPv4 options * Support for synproxy ------------------------------------------------------------------- Sat Jan 19 20:53:09 UTC 2019 - Stefan Brüns - Remove unused dblatex BuildRequires, only needed for the optional and disabled PDF generation (same contents as shipped manpage). ------------------------------------------------------------------- Sat Jun 9 07:28:57 UTC 2018 - jengelh@inai.de - Update to new upstream release 0.9.0 * Support to check if packet matches an existing socket. * Support to limit number of active connections by arbitrary criteria, such as ip addresses, networks, conntrack zones or any combination thereof. * Added support for "audit" logging. ------------------------------------------------------------------- Fri May 11 07:30:10 UTC 2018 - jengelh@inai.de - Update to new upstream release 0.8.5 * support to add/insert a rule at a given index position * meter statement now supports a configureable upper max size * timeouts for sets can now be specified in milliseconds * re-add iptables-like empty skeleton rulesets ------------------------------------------------------------------- Wed May 2 06:08:00 UTC 2018 - jengelh@inai.de - Update to new upstream release 0.8.4 * Support to match IPv6 segment routing headers. * New "meta ibrname" and "meta obrname" arguments to match the name of the logical bridge a packet is passing through. These new names replace the old (misnamed) "ibriport"/"obriport". * `nft -a` will now show handle identifier for all objects, including tables and chains. * nft can now delete objects by their handle number. * Support to update maps from the ruleset (packet path). * the "--echo" option now prints handle id for tables and object too. * `nft -f -` will now read from standard input * Support for flow tables, cf. man page or https://lwn.net/Articles/738214/ . ------------------------------------------------------------------- Sat Mar 3 22:59:01 UTC 2018 - jengelh@inai.de - Update to new upstream release 0.8.3 * raw payload support to match headers that do not yet have received a mnemonic. ------------------------------------------------------------------- Sat Feb 3 14:26:36 UTC 2018 - jengelh@inai.de - Update to new upstream release 0.8.2 * add secpath support ------------------------------------------------------------------- Tue Jan 16 14:16:40 UTC 2018 - jengelh@inai.de - Update to new upstream release 0.8.1 * This release deprecates the "flow table" syntax in favor of "meter". ------------------------------------------------------------------- Fri Oct 13 08:39:41 UTC 2017 - jengelh@inai.de - Update to new upstream release 0.8 * This release contains new features available up to the (upcoming) Linux 4.14 kernel release: * Support for stateful objects, these objects are uniquely identified by a user-defined name, you can refer to them from rules, and there is a well established interface to operate with them. * Sort set elements when listing them, from lower to largest. * TCP option matching and mangling support. This includes TCP maximum segment size mangling. * Add new "-s" option for listings without stateful information. * Add new -c/--check option for nft, to tests if your ruleset loads fine, into the kernel, this is a dry run mode. * Connection tracking helper support. * Add --echo option, to print the handle that the kernel allocates to uniquely identify rules. * Conntrack zone support * Symmetric hash support * Add support to include directories from nft natives scripts, files are loaded in alphanumerical order. * Allow to check if IPv6 extension header or TCP option exists or is missing. * Extend quota support to display used bytes. * Add ct average matching, to match average bytes per packet a connection has transferred so far, to map the existing feature available in the iptables connbytes match. * Allow to flush maps and flow tables. * Allow to embed set definition into an existing set. * Conntrack event filtering support via rule. ------------------------------------------------------------------- Tue Dec 20 22:35:41 UTC 2016 - jengelh@inai.de - Update to new upstream release 0.7 * Add new fib expression, which can be used to obtain the output interface from the route table based on either source or destination address of a packet. * Support hashing of any arbitrary key combination, eg. * Add number generation support. Useful for round-robin packet mark setting. * Add quota support, eg. * Introduce routing expression, for routing related data with support for nexthop * Notrack support, to explicitly skip connection tracking for matching packets. * Support to set non-byte bound packet header fields, including checksum adjustment. * Add 'create set' and 'create element' commands. * Allow to use variable reference for set element definitions. * Allow to use variable definitions from element commands. * Add support to flush set. You can use this new command to remove all existing elements in a set. * Inverted set lookups. * Honor absolute and relative paths via include file, where: * Support log flags, to enable logging TCP sequence and options. * tc classid parser support, eg. * Allow numeric connlabels, so if connlabel still works with undefined labels. ------------------------------------------------------------------- Thu Jun 2 18:31:23 UTC 2016 - jengelh@inai.de - Update to new upstream release 0.6 * Rules may be replaced now * Flow table support (requires Linux >= 4.3) * Support for tracing * Ratelimiting now supports units like bytes/second. * Matchinv VLAN IDs, DSCP/ECN, ICMP RtAdv & RtSol ------------------------------------------------------------------- Thu Sep 17 21:16:31 UTC 2015 - jengelh@inai.de - Update to new upstream release 0.5 * Support combinations of two or more selectors to build a tuple * Timeout support for sets * Dormant flag for tables * Default chain policy specifiable on creation ------------------------------------------------------------------- Sat May 23 23:06:12 UTC 2015 - mrueckert@suse.de - set the url to the project page - pass --disable-silent-rules to configure to allow gcc post build check to work ------------------------------------------------------------------- Tue Dec 16 01:25:00 UTC 2014 - jengelh@inai.de - Update to new upstream release 0.4 * Since Linux 3.18: support for global ruleset operations * Since 3.17: full logging support for all the families, including nfnetlink_log * 3.16: automatic selection of the optimal set implementation * 3.14: reject support for ip, ip6 and inet * 3.18: reject support for bridge, and reject icmpx abstraction * 3.18: masquerade support * 3.19: redirect support * Extend meta to support pkttype, cpu and devgroup matching. ------------------------------------------------------------------- Fri Jun 27 17:08:46 UTC 2014 - jengelh@inai.de - Update to new upstream release 0.3 * More compact syntax for the queue action * Match input and output bridge interface name through "meta ibriport" and "meta obriport" * netlink event monitor, to monitor ruleset events, set changes, etc. * New transaction infrastructure - fully atomic updates for all object available in the upcoming 3.16. ------------------------------------------------------------------- Mon Jan 13 09:05:35 UTC 2014 - jengelh@inai.de - Initial package for build.opensuse.org