- Update to version 2.7.2:
For more see NEWS and UPGRADING in /usr/share/doc/packages/nut.
* upsdrvctl is now installed to $prefix/sbin rather than
$driverexec. This usually means moving from /bin to /sbin, apart
from few exceptions.
* FreeDesktop Hardware Abstraction Layer (HAL) support was removed.
* This is a good time to point out that for stricter packaging
systems, it may be beneficial to add "--enable-option-checking=fatal"
to the ./configure command line, in order to quickly pick up any
other removed option flags.
Other changes:
* libupsclient had undefined references related to functions of
libcommon.This issue was reported on Debian (bug #731156) and
is now fixed
* support for new devices:
+ CABAC UPS-1700DV2
+ Eaton Powerware 3105
+ Emerson Network Power Liebert PSI 1440
+ MicroDowell B.Box LP 500
+ Numeric Digital 800 plus
+ OptiUPS VS 575C
+ Tripp Lite SU10KRT3/1X
* nutdrv_atcl_usb: new driver for 'ATCL FOR UPS'
* al175: re-introduced this driver (actually, it was in 2.7.1)
* upsdrvctl now provides retry options for upsdrvctl and driver(s)
* snmp-ups: add support for XPPC-MIB and Tripp Lite SU10KRT3/1X.
Also fix erroneous status in HP/Compaq SNMP MIB (with the most
recent HP firmware (1.76) ;
improved various MIBs (APC, HP/Compaq, ...)
* nutdrv_qx: add new 'fallback' Q1 subdriver, with minimal
OBS-URL: https://build.opensuse.org/request/show/258925
OBS-URL: https://build.opensuse.org/package/show/hardware/nut?expand=0&rev=49
- Update to version 2.7.1:
For more see NEWS and UPGRADING in /usr/share/doc/packages/nut.
Potentially incompatible changes:
* First release after the transition from Subversion to Git.
* The linkman:apcsmart[8] driver has been replaced by a new
implementation. There is a new parameter, 'ttymode'. In case
of issues with this new version, users can revert to
apcsmart-old.
* The linkman:nutdrv_qx[8] driver will eventually supersede
blazer_ser and blazer_usb. Options are not exactly the same,
but are documented in the nutdrv_qx man page.
* Mozilla NSS support has been added.
* linkman:upsrw[8] now prints out the maximum size of
variables.
Other changes:
* Added a new driver, nutdrv_qx, for Megatec/Qx devices. This
driver will eventually replace the blazer_ser and blazer_usb
drivers. In particular, it adds support for Voltronic Power
devices.
* Increased USB_TIMEOUT to standards-compliant 5.000 seconds in
most drivers. This should reduce the number of timeouts on
low-speed USB 1.1 devices.
* Added many devices to the HCL. Of particular note are many
Tripp Lite USB HID PDC models which were tested against NUT by
Tripp Lite.
* Reworked some visual elements of the HCL.
* Also increased timeouts and added redundant commands to improve
reliability of mge-utalk driver.
* Added the apcupsd-ups driver to interoperate with apcupsd
installations.
* Added documentation on creating subdrivers for snmp-ups and
nutdrv_qx.
* Added new drivers for the Riello UPS product line
(riello_ser/riello_usb).
* Many improvements to the BCM/XCP.
* Added a few variables to the Powercom HID mappings.
* Updated the apcsmart driver, and renamed the previous driver to
apcsmart-old.
* Fixed the battery percentage calculation in the bestfcom
driver.
* libnutclient has been added as a C++ alternative to
libupsclient.
* Fix shutdown of Eaton HID, using usbhid-ups and mge-shut
* usbhid-ups: final fix for APC Back UPS ES.
* nut-scanner: fix crash
* IPMI support can handle more different versions of FreeIPMI
* Support power supplies scan over the network nut-scanner can
now scan for power supplies with IPMI over LAN. This is
currently limited to IPMI 1.5 only
* Improve systemd integration
* snmp-ups: Fixed a crash on outlet management, and added
delta_ups MIB support. Also fixed mappings for
upsBypassVoltage, upsBypassCurrent, and upsBypassPower in
three-phase IETF MIB.
- Enable FreeIPMI.
- Turn systemd integration on.
- Fix README.SUSE.
- nut-preconfig.patch: Fix UID recommendation.
OBS-URL: https://build.opensuse.org/request/show/221361
OBS-URL: https://build.opensuse.org/package/show/hardware/nut?expand=0&rev=39
