Stanislav Brabec
bbea59b900
- Update to version 2.7.1:
For more see NEWS and UPGRADING in /usr/share/doc/packages/nut.
Potentially incompatible changes:
* First release after the transition from Subversion to Git.
* The linkman:apcsmart[8] driver has been replaced by a new
implementation. There is a new parameter, 'ttymode'. In case
of issues with this new version, users can revert to
apcsmart-old.
* The linkman:nutdrv_qx[8] driver will eventually supersede
blazer_ser and blazer_usb. Options are not exactly the same,
but are documented in the nutdrv_qx man page.
* Mozilla NSS support has been added.
* linkman:upsrw[8] now prints out the maximum size of
variables.
Other changes:
* Added a new driver, nutdrv_qx, for Megatec/Qx devices. This
driver will eventually replace the blazer_ser and blazer_usb
drivers. In particular, it adds support for Voltronic Power
devices.
* Increased USB_TIMEOUT to standards-compliant 5.000 seconds in
most drivers. This should reduce the number of timeouts on
low-speed USB 1.1 devices.
* Added many devices to the HCL. Of particular note are many
Tripp Lite USB HID PDC models which were tested against NUT by
Tripp Lite.
* Reworked some visual elements of the HCL.
* Also increased timeouts and added redundant commands to improve
reliability of mge-utalk driver.
* Added the apcupsd-ups driver to interoperate with apcupsd
installations.
* Added documentation on creating subdrivers for snmp-ups and
nutdrv_qx.
* Added new drivers for the Riello UPS product line
(riello_ser/riello_usb).
* Many improvements to the BCM/XCP.
* Added a few variables to the Powercom HID mappings.
* Updated the apcsmart driver, and renamed the previous driver to
apcsmart-old.
* Fixed the battery percentage calculation in the bestfcom
driver.
* libnutclient has been added as a C++ alternative to
libupsclient.
* Fix shutdown of Eaton HID, using usbhid-ups and mge-shut
* usbhid-ups: final fix for APC Back UPS ES.
* nut-scanner: fix crash
* IPMI support can handle more different versions of FreeIPMI
* Support power supplies scan over the network nut-scanner can
now scan for power supplies with IPMI over LAN. This is
currently limited to IPMI 1.5 only
* Improve systemd integration
* snmp-ups: Fixed a crash on outlet management, and added
delta_ups MIB support. Also fixed mappings for
upsBypassVoltage, upsBypassCurrent, and upsBypassPower in
three-phase IETF MIB.
- Enable FreeIPMI.
- Turn systemd integration on.
- Fix README.SUSE.
- nut-preconfig.patch: Fix UID recommendation.
OBS-URL: https://build.opensuse.org/request/show/221361
OBS-URL: https://build.opensuse.org/package/show/hardware/nut?expand=0&rev=39
47 lines
1.3 KiB
Diff
47 lines
1.3 KiB
Diff
--- conf/hosts.conf.sample
|
|
+++ conf/hosts.conf.sample
|
|
@@ -27,3 +27,5 @@
|
|
# MONITOR myups@localhost "Local UPS"
|
|
# MONITOR su2200@10.64.1.1 "Finance department"
|
|
# MONITOR matrix@shs-server.example.edu "Sierra High School data room #1"
|
|
+
|
|
+MONITOR myups@localhost "Local UPS"
|
|
--- conf/ups.conf.sample
|
|
+++ conf/ups.conf.sample
|
|
@@ -102,3 +102,8 @@
|
|
#
|
|
# To find out if your driver supports any extra settings, start it with
|
|
# the -h option and/or read the driver's documentation.
|
|
+
|
|
+[myups]
|
|
+ driver = undefined
|
|
+ port = /dev/undefined
|
|
+ desc = "Local UPS"
|
|
--- conf/upsd.users.sample
|
|
+++ conf/upsd.users.sample
|
|
@@ -62,3 +62,13 @@
|
|
# The matching MONITOR line in your upsmon.conf would look like this:
|
|
#
|
|
# MONITOR myups@localhost 1 upsmon pass master (or slave)
|
|
+
|
|
+[upsmaster]
|
|
+ password = @UPSD_INITIAL_MASTER_PASSWORD@
|
|
+ allowfrom = localhost
|
|
+ upsmon master
|
|
+
|
|
+[upsslave]
|
|
+ password = @UPSD_INITIAL_SLAVE_PASSWORD@
|
|
+ allowfrom = localhost
|
|
+ upsmon slave
|
|
--- conf/upsmon.conf.sample
|
|
+++ conf/upsmon.conf.sample
|
|
@@ -84,6 +84,8 @@
|
|
# MONITOR su700@server.example.com 1 upsmon secretpass slave
|
|
# MONITOR myups@localhost 1 upsmon pass master (or slave)
|
|
|
|
+MONITOR myups@localhost 1 upsmaster @UPSD_INITIAL_MASTER_PASSWORD@ master
|
|
+
|
|
# --------------------------------------------------------------------------
|
|
# MINSUPPLIES <num>
|
|
#
|