37 Commits

Author SHA256 Message Date
3387351b2b Accepting request 1221424 from Base:System
OBS-URL: https://build.opensuse.org/request/show/1221424
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=17
2024-11-05 14:55:21 +00:00
b1e195aae8 - Update to version 2.3.1:
* iputil: pack and unpack using native byte ordering

OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=36
2024-11-05 12:39:01 +00:00
559476c1f4 Accepting request 1116491 from Base:System
- Actually update the code from 2.3-rc4 to 2.3

OBS-URL: https://build.opensuse.org/request/show/1116491
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=16
2023-10-13 21:15:32 +00:00
aa1015b475 - Actually update the code from 2.3-rc4 to 2.3
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=34
2023-10-09 14:05:22 +00:00
27b6216074 Accepting request 1112898 from Base:System
- Update to version v2.3
  * Support for NVMe Boot Firmware Table (NBFT) as configuration source
  * Optimization of udev handling (bsc#1214078)
  * Bug fixes and optimizations

OBS-URL: https://build.opensuse.org/request/show/1112898
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=15
2023-09-22 19:47:37 +00:00
53851e6979 - Update to version v2.3
* Support for NVMe Boot Firmware Table (NBFT) as configuration source
  * Optimization of udev handling (bsc#1214078)
  * Bug fixes and optimizations

OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=32
2023-09-21 19:08:18 +00:00
9f7b9aa07c Accepting request 1107771 from Base:System
Automatic submission by obs-autosubmit

OBS-URL: https://build.opensuse.org/request/show/1107771
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=14
2023-08-28 15:18:31 +00:00
cca21c699c - Update to version v2.3-rc4:
* Improve algorithm to see if we can reuse existing connections
  * udev: Optimize uevent handling
  * iputil: Reduce amount of netlink requests to the kernel
  * udev: FC/Loop - use case-insensitive comparison for traddr
  * trid: Take Host NQN into account
  * avahi: add connectivity checker to verify IP addresses are reachable
  * stafd|ctrl: Do not recreate ctrl object on nvme removed events
  * udev: Rework/simplify _cid_matches_tid()
  * udev-rules: Only react to `rediscover` events (not `connected`)
  * udev: Use ipaddress objects when comparing traddr.
  * udev: Only take src-addr into account for transport=="tcp"
  * trid: use strong comparison on host-iface
  * udev-rule: Invoke systemctl "restart" instead of "start"
  * udev: improve comparison between candidate and existing controllers
  * nbft: stafd will now use NBFT data (if found)
  * nbft: Add NbftConf() object to retrieve and cache NBFT data
  * iputil: Add mac2iface() and corresponding unit test
  * ctrl: fix inverted logic "is not None" -> "is None"
  * staslib: Add method to retrieve NBFT data

OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=30
2023-08-21 13:33:54 +00:00
3469df39d3 Accepting request 1092510 from Base:System
- Update to version 2.2.2:
   
   Fix python crash caused by wrong transport identifier handling
  (bsc#1211557)

OBS-URL: https://build.opensuse.org/request/show/1092510
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=13
2023-06-12 13:27:50 +00:00
6b28727dfb OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=28 2023-06-12 10:28:11 +00:00
cbbd61c632 - Update to version 2.2.2:
Fix python crash caused by wrong transport identifier handling
  (bsc#1211557)

OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=27
2023-06-12 10:25:04 +00:00
35a71d37e2 Accepting request 1091049 from Base:System
OBS-URL: https://build.opensuse.org/request/show/1091049
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=12
2023-06-06 17:56:19 +00:00
32728c4885 Accepting request 1091048 from home:mwilck:branches:Base:System
- Update to version 2.2.1:
  * staslib: Fix setting controller DHCHAP key (bsc#1211557)

OBS-URL: https://build.opensuse.org/request/show/1091048
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=25
2023-06-06 08:27:34 +00:00
b2cf519e35 Accepting request 1076555 from Base:System
- Update to version 2.2:
  * add DHCHAP support for in-band authentication (bsc#1208580)
  * staslib: Define LIBNVME_VERSION in defs.py
  * staslib: Disable udev-rule permanently
  * build: Change libnvme dependency from 1.2 to 1.3 (forwarded request 1076554 from mwilck)

OBS-URL: https://build.opensuse.org/request/show/1076555
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=11
2023-04-01 17:32:23 +00:00
299dc398e2 Accepting request 1076554 from home:mwilck:branches:Base:System
- Update to version 2.2:
  * add DHCHAP support for in-band authentication (bsc#1208580)
  * staslib: Define LIBNVME_VERSION in defs.py
  * staslib: Disable udev-rule permanently
  * build: Change libnvme dependency from 1.2 to 1.3

OBS-URL: https://build.opensuse.org/request/show/1076554
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=23
2023-03-31 19:55:10 +00:00
223bfb3e26 Accepting request 1061020 from Base:System
- Update to version 2.1.2:
  * staslib: fix RoCE support (bsc#1207436)
  * staslib: Only display unresponsive timer info for "discovered" DCs
  * staslib: Fix Connect/Disconnect performed in reserve order
  * udev: Set udev event priority to high
  * stafd: Bug fix. Default "[Global] persistent-connections=false"
  * stafd: Handle unresponsive DCs in _config_ctrls_finish()
  * stafd: Fix handling of lost zeroconf-discovered DC
  * staslib: Improve name resolution algorithm
  * staslib: Add unit (sec) to timeout value in info() output (forwarded request 1061019 from mwilck)

OBS-URL: https://build.opensuse.org/request/show/1061020
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=10
2023-01-26 12:57:44 +00:00
9536352e8e Accepting request 1061019 from home:mwilck:branches:Base:System
- Update to version 2.1.2:
  * staslib: fix RoCE support (bsc#1207436)
  * staslib: Only display unresponsive timer info for "discovered" DCs
  * staslib: Fix Connect/Disconnect performed in reserve order
  * udev: Set udev event priority to high
  * stafd: Bug fix. Default "[Global] persistent-connections=false"
  * stafd: Handle unresponsive DCs in _config_ctrls_finish()
  * stafd: Fix handling of lost zeroconf-discovered DC
  * staslib: Improve name resolution algorithm
  * staslib: Add unit (sec) to timeout value in info() output

OBS-URL: https://build.opensuse.org/request/show/1061019
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=21
2023-01-25 19:35:18 +00:00
f19f20d442 Accepting request 1042702 from Base:System
- Update to version 2.1:
  * stafd: Add zeroconf-connections-persistence conf. parameter
  * Avahi: Handle upper/lower case 'NQN/nqn' in TXT attribute
    (bsc#1205873)
  * stafd: Add "origin" parameter to DC controller objects
  * staslib: Trim whitespaces at the source (bsc#1204975)
  * udev: Throttle EnvironmentError exception messages
  * del patch: 0001-meson-disable-subproject.patch (not necessary any more)

  * add patch: 0001-meson-disable-subproject.patch (to fix build in OBS) (forwarded request 1042700 from mwilck)

OBS-URL: https://build.opensuse.org/request/show/1042702
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=9
2022-12-13 17:57:09 +00:00
48b1499f5a Accepting request 1042700 from home:mwilck:branches:Base:System
- Update to version 2.1:
  * stafd: Add zeroconf-connections-persistence conf. parameter
  * Avahi: Handle upper/lower case 'NQN/nqn' in TXT attribute
    (bsc#1205873)
  * stafd: Add "origin" parameter to DC controller objects
  * staslib: Trim whitespaces at the source (bsc#1204975)
  * udev: Throttle EnvironmentError exception messages
  * del patch: 0001-meson-disable-subproject.patch (not necessary any more)

  * add patch: 0001-meson-disable-subproject.patch (to fix build in OBS)

OBS-URL: https://build.opensuse.org/request/show/1042700
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=19
2022-12-13 15:05:06 +00:00
6016b4a650 Accepting request 1037166 from Base:System
OBS-URL: https://build.opensuse.org/request/show/1037166
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=8
2022-11-22 15:10:12 +00:00
fa35adc4b7 Accepting request 1037165 from home:mwilck:branches:Base:System
- Update to version 2.0 (jsc#PED-2487)
  * stafd: Add support for PLEO bit ("Port Local Entries Only",
  only with libnvme 1.2 or higher)
  * Add support for NCC bit ("Not Connected to CDC")
  * "sticky-connections" is replaced by "disconnect-scope+disconnect-trtypes"
  * "blacklist" is replaced by "exclude" (but still supported)
  * better udev support / coexistence
  * support for new kernel "src_addr" attribute
  add patch: 0001-meson-disable-subproject.patch (to fix build in OBS)

OBS-URL: https://build.opensuse.org/request/show/1037165
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=17
2022-11-21 18:04:50 +00:00
d42f480b41 Accepting request 1035873 from Base:System
OBS-URL: https://build.opensuse.org/request/show/1035873
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=7
2022-11-16 14:43:10 +00:00
Hannes Reinecke
0b5b448ebe Accepting request 1035870 from home:mwilck:branches:Base:System
- Update to version 1.1.7:
  * staslib: Trim white spaces from DLPEs and manual configuration.
  (bsc#1204975)

OBS-URL: https://build.opensuse.org/request/show/1035870
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=15
2022-11-15 15:03:58 +00:00
fd0c590774 Accepting request 993927 from Base:System
OBS-URL: https://build.opensuse.org/request/show/993927
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=6
2022-08-09 13:28:01 +00:00
0ccd0b69e3 Accepting request 993847 from home:mwilck:branches:Base:System
- Update to version 1.1.6:
  Bug fix release
  * conf: Enable sticky-connections by default
  * staslib: check that async operation hasn't been cancelled before proceeding
  * stacd: fix I/O controller connection audits
  * staslib: add override support
  * systemd: add explicit dependency to modprobe@nvme_fabrics.service

OBS-URL: https://build.opensuse.org/request/show/993847
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=13
2022-08-09 08:01:00 +00:00
85b3063e38 Accepting request 986671 from Base:System
OBS-URL: https://build.opensuse.org/request/show/986671
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=5
2022-07-05 10:09:20 +00:00
8934e86e40 Accepting request 986661 from home:mwilck:branches:Base:System
- Update to version 1.1.5 (bsc#1200128)
  Bug fix release
  * udev: fix I/O controller scan & detect algorithm
  * stacd: Fix D-Bus race condition between stacd and stafd.
  * staslib: fix support for fibre channel
  * doc: update README.md
  * staslib: fix race conditions during controller object removal.
  * stacd: fix defered call to remove_controller() with wrong arguments
  * staslib: make sure controller object gets "purged" when removed.
  * staslib: calling wrong cback function on controller removal.
  * staslib: Fix cback function deleting object that called the cback.
  * stacd: audit connections
  * stafd, stacd: Add man page to systend service file.
  * stacd: Add configuration parameter 'sticky-connections'
  * doc: troubleshoot guide for missing mDNS packets
  * stacd: allow disabling nvme-cli auto-connect udev rule.
- Added systemd service file (service disabled)
- Spec file: use %python_sitelib rather than %python_sitearch, and install
  everything under %{python_sitelib}/staslib

OBS-URL: https://build.opensuse.org/request/show/986661
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=11
2022-07-04 14:25:06 +00:00
f0269d865c Accepting request 967286 from Base:System
OBS-URL: https://build.opensuse.org/request/show/967286
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=4
2022-04-06 19:52:02 +00:00
919a5f1d14 Accepting request 967284 from home:wagi:branches:Base:System
- Update to version v1.0:
  * Do not call persistent_set() from libnvme
  * dbus: return native dbus data instead of json when possible.
  * update documentation

OBS-URL: https://build.opensuse.org/request/show/967284
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=9
2022-04-06 11:30:41 +00:00
a7b4f4c972 Accepting request 964850 from Base:System
OBS-URL: https://build.opensuse.org/request/show/964850
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=3
2022-03-25 20:54:58 +00:00
0a0a89ed56 Accepting request 964849 from home:wagi:branches:Base:System
- Update to version 1.0-rc5:
  * Remove misconfiguration check. (bsc#1197361)
  * Document how to increase the number of interfaces that Avahi can monitor.
- Removed python3-netifaces dependency (bsc#1197361)
- Added ahahi dependency
- Do not list files twice (add %dir to directory paths)
- Drop workaround for Python interpreter path fixup.

OBS-URL: https://build.opensuse.org/request/show/964849
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=7
2022-03-25 12:48:30 +00:00
103dc5935f Accepting request 964187 from Base:System
OBS-URL: https://build.opensuse.org/request/show/964187
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=2
2022-03-23 19:18:31 +00:00
e552e5abdd Accepting request 964186 from home:wagi:branches:Base:System
- Update to version 1.0-rc4:
  * Check ignore-iface when creating TransportId object
  * Adding man pages for ip-family and ignore-iface
  * Add ignore-iface and ip-family conf. options
  * Update the documentation
  * Change default address returned by name resolver
  * Filter out invalid IP addresses. (bsc#1197361)
  * When reading the Host NQN, warn people if the NQN seems invalid
  * Print descriptive message when unable to run stafctl/stacctl
  * Use the newly added cntlrtype to check the type of controller
  * minor fix to previous change to set the log level on libnvme
  * LOG: enable libnvme debug when trace is enabled
- Added python3-netifaces dependency

OBS-URL: https://build.opensuse.org/request/show/964186
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=5
2022-03-23 08:50:20 +00:00
38bad6f626 Accepting request 959246 from Base:System
OBS-URL: https://build.opensuse.org/request/show/959246
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/nvme-stas?expand=0&rev=1
2022-03-03 23:17:59 +00:00
5d39271cdc Accepting request 959240 from home:wagi:branches:Base:System
- Correct License information. This project is licenced under
  Apache License 2.0.
- Mark sys.conf.doc as config file.

OBS-URL: https://build.opensuse.org/request/show/959240
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=3
2022-03-03 14:41:26 +00:00
e59bff7917 Accepting request 959012 from home:dimstar:Factory
- Add gobject-introspection BuildRequires: enable typelib
  introspection. This allows RPM to add a bunch of autodetected
  dependenices by inspecting the python scripts (basedon
  python-gobject).

(plus running of spec-cleaner)

OBS-URL: https://build.opensuse.org/request/show/959012
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=2
2022-03-03 14:11:14 +00:00
43f034cda6 Accepting request 958731 from home:wagi
I want to maintain nvme-stas in Factory and would like to use Base:System as devel/feeder project.

OBS-URL: https://build.opensuse.org/request/show/958731
OBS-URL: https://build.opensuse.org/package/show/Base:System/nvme-stas?expand=0&rev=1
2022-03-03 12:15:36 +00:00