pool/openssh
SHA256
2
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
01365117e3
openssh/openssh-9.6p1-crypto-policies-man.patch

662 lines
23 KiB
Diff
Raw Normal View History

- Update to openssh 9.9p1: * No changes for askpass, see main package changelog for details. - Update to openssh 9.9p1: = Future deprecation notice * OpenSSH plans to remove support for the DSA signature algorithm in early 2025. This release disables DSA by default at compile time. DSA, as specified in the SSHv2 protocol, is inherently weak - being limited to a 160 bit private key and use of the SHA1 digest. Its estimated security level is only 80 bits symmetric equivalent. OpenSSH has disabled DSA keys by default since 2015 but has retained run-time optional support for them. DSA was the only mandatory-to-implement algorithm in the SSHv2 RFCs, mostly because alternative algorithms were encumbered by patents when the SSHv2 protocol was specified. This has not been the case for decades at this point and better algorithms are well supported by all actively-maintained SSH implementations. We do not consider the costs of maintaining DSA in OpenSSH to be justified and hope that removing it from OpenSSH can accelerate its wider deprecation in supporting cryptography libraries. = Potentially-incompatible changes * ssh(1): remove support for pre-authentication compression. OpenSSH has only supported post-authentication compression in the server for some years. Compression before authentication significantly increases the attack surface of SSH servers and risks creating oracles that reveal information about information sent during authentication. OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=275
2024-09-25 10:42:29 +02:00
Index: openssh-9.6p1/ssh_config.5
===================================================================
--- openssh-9.6p1.orig/ssh_config.5
+++ openssh-9.6p1/ssh_config.5
@@ -403,17 +403,14 @@ A single argument of
causes no CNAMEs to be considered for canonicalization.
This is the default behaviour.
.It Cm CASignatureAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies which algorithms are allowed for signing of certificates
by certificate authorities (CAs).
-The default is:
-.Bd -literal -offset indent
-ssh-ed25519,ecdsa-sha2-nistp256,
-ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-sk-ssh-ed25519@openssh.com,
-sk-ecdsa-sha2-nistp256@openssh.com,
-rsa-sha2-512,rsa-sha2-256
-.Ed
-.Pp
If the specified list begins with a
.Sq +
character, then the specified algorithms will be appended to the default set
@@ -542,20 +539,26 @@ If the option is set to
(the default),
the check will not be executed.
.It Cm Ciphers
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the ciphers allowed and their order of preference.
Multiple ciphers must be comma-separated.
If the specified list begins with a
.Sq +
-character, then the specified ciphers will be appended to the default set
-instead of replacing them.
+character, then the specified ciphers will be appended to the built-in
+openssh default set instead of replacing them.
If the specified list begins with a
.Sq -
character, then the specified ciphers (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
If the specified list begins with a
.Sq ^
character, then the specified ciphers will be placed at the head of the
-default set.
+built-in openssh default set.
.Pp
The supported ciphers are:
.Bd -literal -offset indent
@@ -571,13 +574,6 @@ aes256-gcm@openssh.com
chacha20-poly1305@openssh.com
.Ed
.Pp
-The default is:
-.Bd -literal -offset indent
-chacha20-poly1305@openssh.com,
-aes128-ctr,aes192-ctr,aes256-ctr,
-aes128-gcm@openssh.com,aes256-gcm@openssh.com
-.Ed
-.Pp
The list of available ciphers may also be obtained using
.Qq ssh -Q cipher .
.It Cm ClearAllForwardings
@@ -979,6 +975,12 @@ command line will be passed untouched to
The default is
.Dq no .
.It Cm GSSAPIKexAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
The list of key exchange algorithms that are offered for GSSAPI
key exchange. Possible values are
.Bd -literal -offset 3n
@@ -991,10 +993,8 @@ gss-nistp256-sha256-,
gss-curve25519-sha256-
.Ed
.Pp
-The default is
-.Dq gss-group14-sha256-,gss-group16-sha512-,gss-nistp256-sha256-,
-gss-curve25519-sha256-,gss-group14-sha1-,gss-gex-sha1- .
This option only applies to connections using GSSAPI.
+.Pp
.It Cm HashKnownHosts
Indicates that
.Xr ssh 1
@@ -1012,36 +1013,26 @@ will not be converted automatically,
but may be manually hashed using
.Xr ssh-keygen 1 .
.It Cm HostbasedAcceptedAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the signature algorithms that will be used for hostbased
authentication as a comma-separated list of patterns.
Alternately if the specified list begins with a
.Sq +
character, then the specified signature algorithms will be appended
-to the default set instead of replacing them.
+to the built-in openssh default set instead of replacing them.
If the specified list begins with a
.Sq -
character, then the specified signature algorithms (including wildcards)
-will be removed from the default set instead of replacing them.
+will be removed from the built-in openssh default set instead of replacing them.
If the specified list begins with a
.Sq ^
character, then the specified signature algorithms will be placed
-at the head of the default set.
-The default for this option is:
-.Bd -literal -offset 3n
-ssh-ed25519-cert-v01@openssh.com,
-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-ecdsa-sha2-nistp384-cert-v01@openssh.com,
-ecdsa-sha2-nistp521-cert-v01@openssh.com,
-sk-ssh-ed25519-cert-v01@openssh.com,
-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-rsa-sha2-512-cert-v01@openssh.com,
-rsa-sha2-256-cert-v01@openssh.com,
-ssh-ed25519,
-ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-sk-ssh-ed25519@openssh.com,
-sk-ecdsa-sha2-nistp256@openssh.com,
-rsa-sha2-512,rsa-sha2-256
-.Ed
+at the head of the built-in openssh default set.
.Pp
The
.Fl Q
@@ -1094,6 +1085,17 @@ to prefer their algorithms.
.Pp
The list of available signature algorithms may also be obtained using
.Qq ssh -Q HostKeyAlgorithms .
+.Pp
+The proposed
+.Cm HostKeyAlgorithms
+during KEX are limited to the set of algorithms that is defined in
+.Cm PubkeyAcceptedAlgorithms
+and therefore they are indirectly affected by system-wide
+.Xr crypto_policies 7 .
+.Xr crypto_policies 7 can not handle the list of host key algorithms directly
+as doing so would break the order given by the
+.Pa known_hosts
+file.
.It Cm HostKeyAlias
Specifies an alias that should be used instead of the
real host name when looking up or saving the host key
@@ -1311,37 +1313,30 @@ it may be zero or more of:
and
.Cm pam .
.It Cm KexAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the permitted KEX (Key Exchange) algorithms that will be used and
their preference order.
The selected algorithm will be the first algorithm in this list that
the server also supports.
Multiple algorithms must be comma-separated.
.Pp
If the specified list begins with a
.Sq +
-character, then the specified algorithms will be appended to the default set
-instead of replacing them.
+character, then the specified methods will be appended to the built-in
+openssh default set instead of replacing them.
If the specified list begins with a
.Sq -
character, then the specified algorithms (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
If the specified list begins with a
.Sq ^
character, then the specified algorithms will be placed at the head of the
-default set.
-.Pp
-The default is:
-.Bd -literal -offset indent
-sntrup761x25519-sha512,sntrup761x25519-sha512@openssh.com,
-mlkem768x25519-sha256,
-curve25519-sha256,curve25519-sha256@libssh.org,
-ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,
-diffie-hellman-group-exchange-sha256,
-diffie-hellman-group16-sha512,
-diffie-hellman-group18-sha512,
-diffie-hellman-group14-sha256,
-diffie-hellman-group14-sha1
-.Ed
+built-in openssh default set.
.Pp
The list of supported key exchange algorithms may also be obtained using
.Qq ssh -Q kex .
@@ -1445,37 +1442,34 @@ function, and all code in the
file.
This option is intended for debugging and no overrides are enabled by default.
.It Cm MACs
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the MAC (message authentication code) algorithms
in order of preference.
The MAC algorithm is used for data integrity protection.
Multiple algorithms must be comma-separated.
If the specified list begins with a
.Sq +
-character, then the specified algorithms will be appended to the default set
-instead of replacing them.
+character, then the specified algorithms will be appended to the built-in
+openssh default set instead of replacing them.
If the specified list begins with a
.Sq -
character, then the specified algorithms (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
If the specified list begins with a
.Sq ^
character, then the specified algorithms will be placed at the head of the
-default set.
+built-in openssh default set.
.Pp
The algorithms that contain
.Qq -etm
calculate the MAC after encryption (encrypt-then-mac).
These are considered safer and their use recommended.
.Pp
-The default is:
-.Bd -literal -offset indent
-umac-64-etm@openssh.com,umac-128-etm@openssh.com,
-hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,
-hmac-sha1-etm@openssh.com,
-umac-64@openssh.com,umac-128@openssh.com,
-hmac-sha2-256,hmac-sha2-512,hmac-sha1
-.Ed
-.Pp
The list of available MAC algorithms may also be obtained using
.Qq ssh -Q mac .
.It Cm NoHostAuthenticationForLocalhost
@@ -1666,39 +1660,32 @@ instead of continuing to execute and pas
The default is
.Cm no .
.It Cm PubkeyAcceptedAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the signature algorithms that will be used for public key
authentication as a comma-separated list of patterns.
If the specified list begins with a
.Sq +
-character, then the algorithms after it will be appended to the default
-instead of replacing it.
+character, then the algorithms after it will be appended to the built-in
+openssh default instead of replacing it.
If the specified list begins with a
.Sq -
character, then the specified algorithms (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
If the specified list begins with a
.Sq ^
character, then the specified algorithms will be placed at the head of the
-default set.
-The default for this option is:
-.Bd -literal -offset 3n
-ssh-ed25519-cert-v01@openssh.com,
-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-ecdsa-sha2-nistp384-cert-v01@openssh.com,
-ecdsa-sha2-nistp521-cert-v01@openssh.com,
-sk-ssh-ed25519-cert-v01@openssh.com,
-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-rsa-sha2-512-cert-v01@openssh.com,
-rsa-sha2-256-cert-v01@openssh.com,
-ssh-ed25519,
-ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-sk-ssh-ed25519@openssh.com,
-sk-ecdsa-sha2-nistp256@openssh.com,
-rsa-sha2-512,rsa-sha2-256
-.Ed
+built-in openssh default set.
.Pp
The list of available signature algorithms may also be obtained using
.Qq ssh -Q PubkeyAcceptedAlgorithms .
+.Pp
+This option affects also
+.Cm HostKeyAlgorithms
.It Cm PubkeyAuthentication
Specifies whether to try public key authentication.
The argument to this keyword must be
@@ -2395,7 +2382,9 @@ This file provides the vendor defaults a
configuration file does not exist.
.El
.Sh SEE ALSO
-.Xr ssh 1
+.Xr ssh 1 ,
+.Xr crypto-policies 7 ,
+.Xr update-crypto-policies 8
.Sh AUTHORS
.An -nosplit
OpenSSH is a derivative of the original and free
Index: openssh-9.6p1/sshd_config.5
===================================================================
--- openssh-9.6p1.orig/sshd_config.5
+++ openssh-9.6p1/sshd_config.5
@@ -381,17 +381,14 @@ If the argument is
then no banner is displayed.
By default, no banner is displayed.
.It Cm CASignatureAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies which algorithms are allowed for signing of certificates
by certificate authorities (CAs).
-The default is:
-.Bd -literal -offset indent
-ssh-ed25519,ecdsa-sha2-nistp256,
-ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-sk-ssh-ed25519@openssh.com,
-sk-ecdsa-sha2-nistp256@openssh.com,
-rsa-sha2-512,rsa-sha2-256
-.Ed
-.Pp
If the specified list begins with a
.Sq +
character, then the specified algorithms will be appended to the default set
@@ -527,20 +524,26 @@ The default is
indicating not to
.Xr chroot 2 .
.It Cm Ciphers
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the ciphers allowed.
Multiple ciphers must be comma-separated.
If the specified list begins with a
.Sq +
-character, then the specified ciphers will be appended to the default set
-instead of replacing them.
+character, then the specified ciphers will be appended to the built-in
+openssh default set instead of replacing them.
If the specified list begins with a
.Sq -
character, then the specified ciphers (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
If the specified list begins with a
.Sq ^
character, then the specified ciphers will be placed at the head of the
-default set.
+built-in openssh default set.
.Pp
The supported ciphers are:
.Pp
@@ -567,13 +570,6 @@ aes256-gcm@openssh.com
chacha20-poly1305@openssh.com
.El
.Pp
-The default is:
-.Bd -literal -offset indent
-chacha20-poly1305@openssh.com,
-aes128-ctr,aes192-ctr,aes256-ctr,
-aes128-gcm@openssh.com,aes256-gcm@openssh.com
-.Ed
-.Pp
The list of available ciphers may also be obtained using
.Qq ssh -Q cipher .
.It Cm ClientAliveCountMax
@@ -764,53 +760,45 @@ For this to work
.Cm GSSAPIKeyExchange
needs to be enabled in the server and also used by the client.
.It Cm GSSAPIKexAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
The list of key exchange algorithms that are accepted by GSSAPI
key exchange. Possible values are
.Bd -literal -offset 3n
-gss-gex-sha1-,
-gss-group1-sha1-,
-gss-group14-sha1-,
-gss-group14-sha256-,
-gss-group16-sha512-,
-gss-nistp256-sha256-,
+gss-gex-sha1-
+gss-group1-sha1-
+gss-group14-sha1-
+gss-group14-sha256-
+gss-group16-sha512-
+gss-nistp256-sha256-
gss-curve25519-sha256-
.Ed
-.Pp
-The default is
-.Dq gss-group14-sha256-,gss-group16-sha512-,gss-nistp256-sha256-,
-gss-curve25519-sha256-,gss-group14-sha1-,gss-gex-sha1- .
This option only applies to connections using GSSAPI.
.It Cm HostbasedAcceptedAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the signature algorithms that will be accepted for hostbased
authentication as a list of comma-separated patterns.
Alternately if the specified list begins with a
.Sq +
character, then the specified signature algorithms will be appended to
-the default set instead of replacing them.
+the built-in openssh set instead of replacing them.
If the specified list begins with a
.Sq -
character, then the specified signature algorithms (including wildcards)
-will be removed from the default set instead of replacing them.
+will be removed from the built-in openssh set instead of replacing them.
If the specified list begins with a
.Sq ^
character, then the specified signature algorithms will be placed at
-the head of the default set.
-The default for this option is:
-.Bd -literal -offset 3n
-ssh-ed25519-cert-v01@openssh.com,
-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-ecdsa-sha2-nistp384-cert-v01@openssh.com,
-ecdsa-sha2-nistp521-cert-v01@openssh.com,
-sk-ssh-ed25519-cert-v01@openssh.com,
-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-rsa-sha2-512-cert-v01@openssh.com,
-rsa-sha2-256-cert-v01@openssh.com,
-ssh-ed25519,
-ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-sk-ssh-ed25519@openssh.com,
-sk-ecdsa-sha2-nistp256@openssh.com,
-rsa-sha2-512,rsa-sha2-256
-.Ed
+the head of the built-in openssh default set.
.Pp
The list of available signature algorithms may also be obtained using
.Qq ssh -Q HostbasedAcceptedAlgorithms .
@@ -876,25 +865,15 @@ is specified, the location of the socket
.Ev SSH_AUTH_SOCK
environment variable.
.It Cm HostKeyAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the host key signature algorithms
that the server offers.
The default for this option is:
-.Bd -literal -offset 3n
-ssh-ed25519-cert-v01@openssh.com,
-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-ecdsa-sha2-nistp384-cert-v01@openssh.com,
-ecdsa-sha2-nistp521-cert-v01@openssh.com,
-sk-ssh-ed25519-cert-v01@openssh.com,
-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-rsa-sha2-512-cert-v01@openssh.com,
-rsa-sha2-256-cert-v01@openssh.com,
-ssh-ed25519,
-ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-sk-ssh-ed25519@openssh.com,
-sk-ecdsa-sha2-nistp256@openssh.com,
-rsa-sha2-512,rsa-sha2-256
-.Ed
-.Pp
The list of available signature algorithms may also be obtained using
.Qq ssh -Q HostKeyAlgorithms .
.It Cm IgnoreRhosts
@@ -1027,24 +1006,30 @@ file on logout.
The default is
.Cm yes .
.It Cm KexAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the permitted KEX (Key Exchange) algorithms that the server will
offer to clients.
The ordering of this list is not important, as the client specifies the
preference order.
Multiple algorithms must be comma-separated.
.Pp
If the specified list begins with a
.Sq +
-character, then the specified algorithms will be appended to the default set
-instead of replacing them.
+character, then the specified methods will be appended to the built-in
+openssh default set instead of replacing them.
If the specified list begins with a
.Sq -
character, then the specified algorithms (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
If the specified list begins with a
.Sq ^
character, then the specified algorithms will be placed at the head of the
-default set.
+built-in openssh default set.
.Pp
The supported algorithms are:
.Pp
@@ -1072,17 +1057,6 @@ ecdh-sha2-nistp521
sntrup761x25519-sha512@openssh.com
.El
.Pp
-The default is:
-.Bd -literal -offset indent
-sntrup761x25519-sha512,sntrup761x25519-sha512@openssh.com,
-mlkem768x25519-sha256,
-curve25519-sha256,curve25519-sha256@libssh.org,
-ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,
-diffie-hellman-group-exchange-sha256,
-diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,
-diffie-hellman-group14-sha256,diffie-hellman-group14-sha1
-.Ed
-.Pp
The list of supported key exchange algorithms may also be obtained using
.Qq ssh -Q KexAlgorithms .
.It Cm ListenAddress
@@ -1167,21 +1142,27 @@ function, and all code in the
file.
This option is intended for debugging and no overrides are enabled by default.
.It Cm MACs
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the available MAC (message authentication code) algorithms.
The MAC algorithm is used for data integrity protection.
Multiple algorithms must be comma-separated.
If the specified list begins with a
.Sq +
-character, then the specified algorithms will be appended to the default set
-instead of replacing them.
+character, then the specified algorithms will be appended to the built-in
+openssh default set instead of replacing them.
If the specified list begins with a
.Sq -
character, then the specified algorithms (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
If the specified list begins with a
.Sq ^
character, then the specified algorithms will be placed at the head of the
-default set.
+built-in openssh default set.
.Pp
The algorithms that contain
.Qq -etm
@@ -1224,15 +1205,6 @@ umac-64-etm@openssh.com
umac-128-etm@openssh.com
.El
.Pp
-The default is:
-.Bd -literal -offset indent
-umac-64-etm@openssh.com,umac-128-etm@openssh.com,
-hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,
-hmac-sha1-etm@openssh.com,
-umac-64@openssh.com,umac-128@openssh.com,
-hmac-sha2-256,hmac-sha2-512,hmac-sha1
-.Ed
-.Pp
The list of available MAC algorithms may also be obtained using
.Qq ssh -Q mac .
.It Cm Match
@@ -1614,36 +1586,26 @@ or equivalent.)
The default is
.Cm yes .
.It Cm PubkeyAcceptedAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+Information about defaults, how to modify the defaults and how to customize
+existing policies with sub-policies are present in manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the signature algorithms that will be accepted for public key
authentication as a list of comma-separated patterns.
Alternately if the specified list begins with a
.Sq +
-character, then the specified algorithms will be appended to the default set
-instead of replacing them.
+character, then the specified algorithms will be appended to the built-in
+openssh default set instead of replacing them.
If the specified list begins with a
.Sq -
character, then the specified algorithms (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
If the specified list begins with a
.Sq ^
character, then the specified algorithms will be placed at the head of the
-default set.
-The default for this option is:
-.Bd -literal -offset 3n
-ssh-ed25519-cert-v01@openssh.com,
-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-ecdsa-sha2-nistp384-cert-v01@openssh.com,
-ecdsa-sha2-nistp521-cert-v01@openssh.com,
-sk-ssh-ed25519-cert-v01@openssh.com,
-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-rsa-sha2-512-cert-v01@openssh.com,
-rsa-sha2-256-cert-v01@openssh.com,
-ssh-ed25519,
-ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-sk-ssh-ed25519@openssh.com,
-sk-ecdsa-sha2-nistp256@openssh.com,
-rsa-sha2-512,rsa-sha2-256
-.Ed
+built-in openssh default set.
.Pp
The list of available signature algorithms may also be obtained using
.Qq ssh -Q PubkeyAcceptedAlgorithms .
@@ -2122,7 +2084,9 @@ This file should be writable by root onl
.El
.Sh SEE ALSO
.Xr sftp-server 8 ,
-.Xr sshd 8
+.Xr sshd 8 ,
+.Xr crypto-policies 7 ,
+.Xr update-crypto-policies 8
.Sh AUTHORS
.An -nosplit
OpenSSH is a derivative of the original and free
Reference in New Issue Copy Permalink