openssh/openssh.spec

494 lines
18 KiB
RPMSpec

#
# spec file for package openssh
#
# Copyright (c) 2020 SUSE LLC
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via https://bugs.opensuse.org/
#
%define sandbox_seccomp 0
%ifnarch ppc
%define sandbox_seccomp 1
%endif
%if 0%{?suse_version} >= 1500
%bcond_without tirpc
%else
%bcond_with tirpc
%endif
%define _fwdir %{_sysconfdir}/sysconfig/SuSEfirewall2.d
%define _fwdefdir %{_fwdir}/services
%define _appdefdir %( grep "configdirspec=" $( which xmkmf ) | sed -r 's,^[^=]+=.*-I(.*)/config.*$,\\1/app-defaults,' )
%define CHECKSUM_SUFFIX .hmac
%define CHECKSUM_HMAC_KEY "HMAC_KEY:OpenSSH-FIPS@SLE"
%define _tmpenableddir %{_localstatedir}/lib/sshd
%define _tmpenabledfile %{_tmpenableddir}/is-enabled.rpmtmp
#Compat macro for new _fillupdir macro introduced in Nov 2017
%if ! %{defined _fillupdir}
%define _fillupdir %{_localstatedir}/adm/fillup-templates
%endif
Name: openssh
Version: 8.3p1
Release: 0
Summary: Secure Shell Client and Server (Remote Login Program)
License: BSD-2-Clause AND MIT
Group: Productivity/Networking/SSH
URL: https://www.openssh.com/
Source0: http://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-%{version}.tar.gz
Source1: http://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-%{version}.tar.gz.asc
Source2: sshd.pamd
Source3: README.SUSE
Source4: README.kerberos
Source5: ssh.reg
Source6: ssh-askpass
Source7: sshd.fw
Source8: sysconfig.ssh
Source9: sshd-gen-keys-start
Source10: sshd.service
Source11: README.FIPS
Source12: cavs_driver-ssh.pl
Source13: https://ftp.openbsd.org/pub/OpenBSD/OpenSSH/RELEASE_KEY.asc#/openssh.keyring
Patch0: openssh-7.7p1-allow_root_password_login.patch
Patch1: openssh-7.7p1-X11_trusted_forwarding.patch
Patch3: openssh-7.7p1-enable_PAM_by_default.patch
Patch4: openssh-7.7p1-eal3.patch
Patch6: openssh-7.7p1-send_locale.patch
Patch7: openssh-7.7p1-hostname_changes_when_forwarding_X.patch
Patch8: openssh-7.7p1-remove_xauth_cookies_on_exit.patch
Patch9: openssh-7.7p1-pts_names_formatting.patch
Patch10: openssh-7.7p1-pam_check_locks.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2752
Patch14: openssh-7.7p1-seccomp_stat.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2752
Patch15: openssh-7.7p1-seccomp_ipc_flock.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2752
# Local FIPS patchset
Patch17: openssh-7.7p1-fips.patch
# Local cavs patchset
Patch18: openssh-7.7p1-cavstest-ctr.patch
# Local cavs patchset
Patch19: openssh-7.7p1-cavstest-kdf.patch
# Local FIPS patchset
Patch20: openssh-7.7p1-fips_checks.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2641
Patch22: openssh-7.7p1-systemd-notify.patch
Patch23: openssh-8.0p1-gssapi-keyex.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=1402
Patch24: openssh-8.1p1-audit.patch
# Local patch to disable runtime abi SSL checks, quite pointless for us
Patch26: openssh-7.7p1-disable_openssl_abi_check.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2641
Patch27: openssh-7.7p1-no_fork-no_pid_file.patch
Patch28: openssh-7.7p1-host_ident.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=1844
Patch29: openssh-7.7p1-sftp_force_permissions.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2143
Patch30: openssh-7.7p1-X_forward_with_disabled_ipv6.patch
Patch31: openssh-7.7p1-ldap.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2213
Patch32: openssh-7.7p1-IPv6_X_forwarding.patch
Patch33: openssh-7.7p1-sftp_print_diagnostic_messages.patch
Patch34: openssh-7.9p1-keygen-preserve-perms.patch
Patch35: openssh-7.9p1-revert-new-qos-defaults.patch
Patch36: openssh-8.1p1-seccomp-clock_nanosleep.patch
Patch37: openssh-8.1p1-seccomp-clock_nanosleep_time64.patch
Patch38: openssh-8.1p1-seccomp-clock_gettime64.patch
Patch39: openssh-8.1p1-use-openssl-kdf.patch
Patch40: openssh-8.1p1-ed25519-use-openssl-rng.patch
Patch41: openssh-fips-ensure-approved-moduli.patch
Patch42: openssh-link-with-sk.patch
BuildRequires: audit-devel
BuildRequires: autoconf
BuildRequires: groff
BuildRequires: libedit-devel
BuildRequires: libselinux-devel
BuildRequires: openldap2-devel
BuildRequires: openssl-devel
BuildRequires: pam-devel
BuildRequires: pkgconfig
BuildRequires: zlib-devel
BuildRequires: pkgconfig(libfido2)
BuildRequires: pkgconfig(libsystemd)
Requires: %{name}-clients = %{version}-%{release}
Requires: %{name}-server = %{version}-%{release}
%if %{with tirpc}
BuildRequires: libtirpc-devel
%endif
%if 0%{?suse_version} >= 1550
BuildRequires: pkgconfig(krb5)
%else
BuildRequires: krb5-mini-devel
%endif
%description
SSH (Secure Shell) is a program for logging into and executing commands
on a remote machine. It replaces rsh (rlogin and rsh) and
provides secure encrypted communication between two untrusted
hosts over an insecure network.
xorg-x11 (X Window System) connections and arbitrary TCP/IP ports can
also be forwarded over the secure channel.
This is a dummy package that pulls in both the client and server
components.
%package common
Summary: SSH (Secure Shell) common files
Group: Productivity/Networking/SSH
Conflicts: nonfreessh
Conflicts: %{name}-fips < %{version}-%{release}
Conflicts: %{name}-fips > %{version}-%{release}
%description common
SSH (Secure Shell) is a program for logging into and executing commands
on a remote machine. It replaces rsh (rlogin and rsh) and
provides secure encrypted communication between two untrusted
hosts over an insecure network.
xorg-x11 (X Window System) connections and arbitrary TCP/IP ports can
also be forwarded over the secure channel.
This package contains common files for the Secure Shell server and
clients.
%package server
Summary: SSH (Secure Shell) server
Group: Productivity/Networking/SSH
Requires: %{name}-common = %{version}-%{release}
Recommends: audit
Requires(pre): shadow
Requires(post): %fillup_prereq
Requires(post): permissions
Provides: openssh:%{_sbindir}/sshd
%description server
SSH (Secure Shell) is a program for logging into and executing commands
on a remote machine. It replaces rsh (rlogin and rsh) and
provides secure encrypted communication between two untrusted
hosts over an insecure network.
xorg-x11 (X Window System) connections and arbitrary TCP/IP ports can
also be forwarded over the secure channel.
This package contains the Secure Shell daemon, which allows clients to
securely connect to your server.
%package clients
Summary: SSH (Secure Shell) client applications
Group: Productivity/Networking/SSH
Requires: %{name}-common = %{version}-%{release}
Provides: openssh:%{_bindir}/ssh
%description clients
SSH (Secure Shell) is a program for logging into and executing commands
on a remote machine. It replaces rsh (rlogin and rsh) and
provides secure encrypted communication between two untrusted
hosts over an insecure network.
xorg-x11 (X Window System) connections and arbitrary TCP/IP ports can
also be forwarded over the secure channel.
This package contains clients for making secure connections to Secure
Shell servers.
%package helpers
Summary: OpenSSH AuthorizedKeysCommand helpers
Group: Productivity/Networking/SSH
Requires: %{name}-common = %{version}-%{release}
%description helpers
SSH (Secure Shell) is a program for logging into and executing commands
on a remote machine. It replaces rsh (rlogin and rsh) and
provides secure encrypted communication between two untrusted
hosts over an insecure network.
xorg-x11 (X Window System) connections and arbitrary TCP/IP ports can
also be forwarded over the secure channel.
This package contains helper applications for OpenSSH which retrieve
keys from various sources.
%package fips
Summary: OpenSSH FIPS crypto module HMACs
Group: Productivity/Networking/SSH
Requires: %{name}-common = %{version}-%{release}
Conflicts: %{name}-common < %{version}-%{release}
Conflicts: %{name}-common > %{version}-%{release}
Obsoletes: %{name}-hmac
%description fips
This package contains hashes that, together with the main openssh packages,
form the FIPS certifiable crypto module.
%package cavs
Summary: OpenSSH FIPS crypto module CAVS tests
Group: Productivity/Networking/SSH
Requires: %{name}-common = %{version}-%{release}
%description cavs
This package contains the FIPS-140 CAVS (Cryptographic Algorithm
Validation Program/Suite) related tests of OpenSSH.
%prep
%setup -q
cp %{SOURCE3} %{SOURCE4} %{SOURCE11} .
%autopatch -p1
# set libexec dir in the LDAP patch
sed -i.libexec 's,@LIBEXECDIR@,%{_libexecdir}/ssh,' \
$( grep -Rl @LIBEXECDIR@ \
$( grep "^+++" openssh-7.7p1-ldap.patch | sed -r 's@^.+/([^/\t ]+).*$@\1@' )
)
%build
autoreconf -fiv
%ifarch s390 s390x %{sparc}
PIEFLAGS="-fPIE"
%else
PIEFLAGS="-fpie"
%endif
CFLAGS="%{optflags} $PIEFLAGS -fstack-protector"
CXXFLAGS="%{optflags} $PIEFLAGS -fstack-protector"
LDFLAGS="-pie -Wl,--as-needed"
#CPPFLAGS="%%{optflags} -DUSE_INTERNAL_B64"
export LDFLAGS CFLAGS CXXFLAGS CPPFLAGS
%configure \
--sysconfdir=%{_sysconfdir}/ssh \
--libexecdir=%{_libexecdir}/ssh \
--with-selinux \
--with-pid-dir=/run \
--with-systemd \
--with-ssl-engine \
--with-pam \
--with-kerberos5=%{_prefix} \
--with-privsep-path=%{_localstatedir}/lib/empty \
%if %{sandbox_seccomp}
--with-sandbox=seccomp_filter \
%else
--with-sandbox=rlimit \
%endif
--disable-strip \
--with-audit=linux \
--with-ldap \
--with-xauth=%{_bindir}/xauth \
--with-libedit \
--with-security-key-builtin \
--target=%{_target_cpu}-suse-linux
%make_build
%install
%make_install
%if %{defined _distconfdir}
install -d -m 755 %{buildroot}%{_distconfdir}/pam.d
install -m 644 %{SOURCE2} %{buildroot}%{_distconfdir}/pam.d/sshd
%else
install -d -m 755 %{buildroot}%{_sysconfdir}/pam.d
install -m 644 %{SOURCE2} %{buildroot}%{_sysconfdir}/pam.d/sshd
%endif
install -d -m 755 %{buildroot}%{_localstatedir}/lib/sshd
install -d -m 755 %{buildroot}%{_sysconfdir}/slp.reg.d/
install -m 644 %{SOURCE5} %{buildroot}%{_sysconfdir}/slp.reg.d/
install -D -m 0644 %{SOURCE10} %{buildroot}%{_unitdir}/sshd.service
ln -s service %{buildroot}%{_sbindir}/rcsshd
install -d -m 755 %{buildroot}%{_fillupdir}
install -m 644 %{SOURCE8} %{buildroot}%{_fillupdir}
# install shell script to automate the process of adding your public key to a remote machine
install -m 755 contrib/ssh-copy-id %{buildroot}%{_bindir}
install -m 644 contrib/ssh-copy-id.1 %{buildroot}%{_mandir}/man1
sed -i -e s@%{_prefix}/libexec@%{_libexecdir}@g %{buildroot}%{_sysconfdir}/ssh/sshd_config
%if 0%{?suse_version} < 1550
# install firewall definitions
mkdir -p %{buildroot}%{_fwdefdir}
install -m 644 %{SOURCE7} %{buildroot}%{_fwdefdir}/sshd
%endif
# askpass wrapper
sed -e "s,@LIBEXECDIR@,%{_libexecdir},g" < %{SOURCE6} > %{buildroot}%{_libexecdir}/ssh/ssh-askpass
sed -e "s,@LIBEXECDIR@,%{_libexecdir},g" < %{SOURCE12} > %{buildroot}%{_libexecdir}/ssh/cavs_driver-ssh.pl
rm -f %{buildroot}%{_datadir}/Ssh.bin
# sshd keys generator wrapper
install -D -m 0755 %{SOURCE9} %{buildroot}%{_sbindir}/sshd-gen-keys-start
# the hmac hashes - taken from openssl
#
# re-define the __os_install_post macro: the macro strips
# the binaries and thereby invalidates any hashes created earlier.
#
# this shows up earlier because otherwise the %%expand of
# the macro is too late.
%{expand:%%global __os_install_post {%__os_install_post
for b in \
%{_bindir}/ssh \
%{_sbindir}/sshd \
%{_libexecdir}/ssh/sftp-server \
; do
openssl dgst -sha256 -binary -hmac %{CHECKSUM_HMAC_KEY} < %{buildroot}$b > %{buildroot}$b%{CHECKSUM_SUFFIX}
done
}}
%pre
# Remember whether the sshd service was enabled prior to an upgrade. This
# is needed when upgrading to a split-off openssh-server package. The
# %%service_add_post scriptlet (in %%post server) will see it as a new service
# and apply the preset, disabling it. We need to reenable it afterwards if
# necessary.
if [ -x %{_bindir}/systemctl ]; then
mkdir -p %{_tmpenableddir} || :
%{_bindir}/systemctl is-enabled sshd > %{_tmpenabledfile} || :
fi
%pre server
getent group sshd >/dev/null || %{_sbindir}/groupadd -r sshd
getent passwd sshd >/dev/null || %{_sbindir}/useradd -r -g sshd -d %{_localstatedir}/lib/sshd -s /bin/false -c "SSH daemon" sshd
%if %{defined _distconfdir}
# move outdated pam.d/*.rpmsave file away
test -f /etc/pam.d/sshd.rpmsave && mv -v /etc/pam.d/sshd.rpmsave /etc/pam.d/sshd.rpmsave.old ||:
%endif
# See %%pre.
if [ -x %{_bindir}/systemctl ]; then
mkdir -p %{_tmpenableddir} || :
%{_bindir}/systemctl is-enabled sshd > %{_tmpenabledfile} || :
fi
%service_add_pre sshd.service
%post server
%{fillup_only -n ssh}
%service_add_post sshd.service
%set_permissions %{_sysconfdir}/ssh/sshd_config
# Work around %%service_add_post disabling the service on upgrades where
# the package name changed.
if [ -x %{_bindir}/systemctl ] && [ -f %{_tmpenabledfile} ] \
&& [ x$(cat %{_tmpenabledfile} || :) == "xenabled" ]; then
systemctl enable sshd || :
fi
rm -f %{_tmpenabledfile}
%preun server
%service_del_preun sshd.service
%postun server
# The openssh-fips trigger script for openssh will normally restart sshd once
# it gets installed, so only restart the service here if openssh-fips is not
# present.
if rpm -q openssh-fips >/dev/null 2>/dev/null; then
%service_del_postun_without_restart sshd.service
else
%service_del_postun sshd.service
fi
%if %{defined _distconfdir}
%posttrans server
# Migration to /usr/etc.
test -f /etc/pam.d/sshd.rpmsave && mv -v /etc/pam.d/sshd.rpmsave /etc/pam.d/sshd ||:
%endif
%triggerin -n openssh-fips -- %{name} = %{version}-%{release}
%restart_on_update sshd
%verifyscript server
%verify_permissions -e %{_sysconfdir}/ssh/sshd_config
%files
# openssh is an empty package that depends on -clients and -server,
# resulting in a clean upgrade path from prior to the split even when
# recommends are disabled.
%files common
%license LICENCE
%doc README.SUSE README.kerberos README.FIPS ChangeLog OVERVIEW README TODO CREDITS
%attr(0755,root,root) %dir %{_sysconfdir}/ssh
%attr(0600,root,root) %config(noreplace) %{_sysconfdir}/ssh/moduli
%attr(0444,root,root) %{_mandir}/man1/ssh-keygen.1*
%attr(0444,root,root) %{_mandir}/man5/moduli.5*
%attr(0755,root,root) %{_bindir}/ssh-keygen*
%files server
%attr(0755,root,root) %{_sbindir}/sshd
%attr(0755,root,root) %{_sbindir}/rcsshd
%attr(0755,root,root) %{_sbindir}/sshd-gen-keys-start
%dir %attr(755,root,root) %{_localstatedir}/lib/sshd
%verify(not mode) %attr(0640,root,root) %config(noreplace) %{_sysconfdir}/ssh/sshd_config
%if %{defined _distconfdir}
%attr(0644,root,root) %{_distconfdir}/pam.d/sshd
%else
%attr(0644,root,root) %config(noreplace) %{_sysconfdir}/pam.d/sshd
%endif
%attr(0644,root,root) %{_unitdir}/sshd.service
%attr(0444,root,root) %{_mandir}/man5/sshd_config*
%attr(0444,root,root) %{_mandir}/man8/sftp-server.8*
%attr(0444,root,root) %{_mandir}/man8/sshd.8*
%attr(0755,root,root) %{_libexecdir}/ssh/sftp-server
%dir %{_sysconfdir}/slp.reg.d
%config %{_sysconfdir}/slp.reg.d/ssh.reg
%{_fillupdir}/sysconfig.ssh
%if 0%{?suse_version} < 1550
%dir %{_fwdir}
%dir %{_fwdefdir}
%config %{_fwdefdir}/sshd
%endif
%files clients
%verify(not mode) %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/ssh/ssh_config
%attr(0755,root,root) %{_bindir}/ssh
%attr(0755,root,root) %{_bindir}/scp*
%attr(0755,root,root) %{_bindir}/sftp*
%attr(0755,root,root) %{_bindir}/ssh-add*
%attr(0755,root,root) %{_bindir}/ssh-agent*
%attr(0755,root,root) %{_bindir}/ssh-copy-id*
%attr(0755,root,root) %{_bindir}/ssh-keyscan*
%attr(0755,root,root) %dir %{_libexecdir}/ssh
%attr(0755,root,root) %{_libexecdir}/ssh/ssh-askpass*
%attr(0755,root,root) %{_libexecdir}/ssh/ssh-keysign*
%attr(0755,root,root) %{_libexecdir}/ssh/ssh-pkcs11-helper*
%attr(0755,root,root) %{_libexecdir}/ssh/ssh-sk-helper*
%attr(0444,root,root) %{_mandir}/man1/scp.1*
%attr(0444,root,root) %{_mandir}/man1/sftp.1*
%attr(0444,root,root) %{_mandir}/man1/ssh-add.1*
%attr(0444,root,root) %{_mandir}/man1/ssh-agent.1*
%attr(0444,root,root) %{_mandir}/man1/ssh-keyscan.1*
%attr(0444,root,root) %{_mandir}/man1/ssh.1*
%attr(0444,root,root) %{_mandir}/man1/ssh-copy-id.1*
%attr(0444,root,root) %{_mandir}/man5/ssh_config.5*
%attr(0444,root,root) %{_mandir}/man8/ssh-pkcs11-helper.8*
%attr(0444,root,root) %{_mandir}/man8/ssh-sk-helper.8*
%attr(0444,root,root) %{_mandir}/man8/ssh-keysign.8*
%files helpers
%attr(0755,root,root) %dir %{_sysconfdir}/ssh
%verify(not mode) %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/ssh/ldap.conf
%attr(0755,root,root) %dir %{_libexecdir}/ssh
%attr(0755,root,root) %{_libexecdir}/ssh/ssh-ldap*
%attr(0444,root,root) %{_mandir}/man5/ssh-ldap*
%attr(0444,root,root) %{_mandir}/man8/ssh-ldap*
%doc HOWTO.ldap-keys openssh-lpk-openldap.schema openssh-lpk-sun.schema
%files fips
%attr(0444,root,root) %{_bindir}/ssh%{CHECKSUM_SUFFIX}
%attr(0444,root,root) %{_sbindir}/sshd%{CHECKSUM_SUFFIX}
%attr(0444,root,root) %{_libexecdir}/ssh/sftp-server%{CHECKSUM_SUFFIX}
%files cavs
%attr(0755,root,root) %{_libexecdir}/ssh/cavs*
%changelog