- Update to 1.1.1v:
* Fix excessive time spent checking DH q parameter value
(bsc#1213853, CVE-2023-3817). The function DH_check() performs
various checks on DH parameters. After fixing CVE-2023-3446 it
was discovered that a large q parameter value can also trigger
an overly long computation during some of these checks. A
correct q value, if present, cannot be larger than the modulus
p parameter, thus it is unnecessary to perform these checks if
q is larger than p. If DH_check() is called with such q parameter
value, DH_CHECK_INVALID_Q_VALUE return flag is set and the
computationally intensive checks are skipped.
* Fix DH_check() excessive time with over sized modulus
(bsc#1213487, CVE-2023-3446). The function DH_check() performs
various checks on DH parameters. One of those checks confirms
that the modulus ("p" parameter) is not too large. Trying to use
a very large modulus is slow and OpenSSL will not normally use
a modulus which is over 10,000 bits in length. However the
DH_check() function checks numerous aspects of the key or
parameters that have been supplied. Some of those checks use the
supplied modulus value even if it has already been found to be
too large. A new limit has been added to DH_check of 32,768 bits.
Supplying a key/parameters with a modulus over this size will
simply cause DH_check() to fail.
* Rebase openssl-1_1-openssl-config.patch
* Remove security patches fixed upstream:
- openssl-CVE-2023-3446.patch
- openssl-CVE-2023-3446-test.patch
OBS-URL: https://build.opensuse.org/request/show/1101915
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=141
- Security fix: [bsc#1213487, CVE-2023-3446]
* Fix DH_check() excessive time with over sized modulus.
* The function DH_check() performs various checks on DH parameters.
One of those checks confirms that the modulus ("p" parameter) is
not too large. Trying to use a very large modulus is slow and
OpenSSL will not normally use a modulus which is over 10,000 bits
in length.
However the DH_check() function checks numerous aspects of the
key or parameters that have been supplied. Some of those checks
use the supplied modulus value even if it has already been found
to be too large.
A new limit has been added to DH_check of 32,768 bits. Supplying
a key/parameters with a modulus over this size will simply cause
DH_check() to fail.
* Add openssl-CVE-2023-3446.patch openssl-CVE-2023-3446-test.patch
OBS-URL: https://build.opensuse.org/request/show/1099668
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=139
- Update to 1.1.1t:
* Fixed X.400 address type confusion in X.509 GeneralName.
There is a type confusion vulnerability relating to X.400 address processing
inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING
but subsequently interpreted by GENERAL_NAME_cmp as an ASN1_TYPE. This
vulnerability may allow an attacker who can provide a certificate chain and
CRL (neither of which need have a valid signature) to pass arbitrary
pointers to a memcmp call, creating a possible read primitive, subject to
some constraints. Refer to the advisory for more information. Thanks to
David Benjamin for discovering this issue. [bsc#1207533, CVE-2023-0286]
This issue has been fixed by changing the public header file definition of
GENERAL_NAME so that x400Address reflects the implementation. It was not
possible for any existing application to successfully use the existing
definition; however, if any application references the x400Address field
(e.g. in dead code), note that the type of this field has changed. There is
no ABI change.
* Fixed Use-after-free following BIO_new_NDEF.
The public API function BIO_new_NDEF is a helper function used for
streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL
to support the SMIME, CMS and PKCS7 streaming capabilities, but may also
be called directly by end user applications.
The function receives a BIO from the caller, prepends a new BIO_f_asn1
filter BIO onto the front of it to form a BIO chain, and then returns
the new head of the BIO chain to the caller. Under certain conditions,
for example if a CMS recipient public key is invalid, the new filter BIO
is freed and the function returns a NULL result indicating a failure.
However, in this case, the BIO chain is not properly cleaned up and the
BIO passed by the caller still retains internal pointers to the previously
freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO
then a use-after-free will occur. This will most likely result in a crash.
OBS-URL: https://build.opensuse.org/request/show/1063668
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=128
- Set OpenSSL 3.0 as the default openssl [bsc#1205042]
* For compatibility with OpenSSL 3.0, the OpenSSL master
configuration file openssl.cnf has been renamed to
openssl-1_1.cnf. The executables openssl, c_rehash, CA.pl and
tsget.pl have been also renamed to openssl-1_1, c_rehash-1_1,
CA-1_1.pl and tsget-1_1.pl, respectively.
* Add openssl-1_1-devel as conflicting with libopenssl-3-devel
* Add openssl-1_1-openssl-config.patch
OBS-URL: https://build.opensuse.org/request/show/1062217
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=126
- Updated openssl.keyring with key A21FAB74B0088AA361152586B8EF1A6BA9DA2D5C
- Update to 1.1.1s:
* Fixed a regression introduced in 1.1.1r version not refreshing the
certificate data to be signed before signing the certificate.
- Update to 1.1.1r:
* Fixed the linux-mips64 Configure target which was missing the
SIXTY_FOUR_BIT bn_ops flag. This was causing heap corruption on that
platform.
* Fixed a strict aliasing problem in bn_nist. Clang-14 optimisation was
causing incorrect results in some cases as a result.
* Fixed SSL_pending() and SSL_has_pending() with DTLS which were failing to
report correct results in some cases
* Fixed a regression introduced in 1.1.1o for re-signing certificates with
different key sizes
* Added the loongarch64 target
* Fixed a DRBG seed propagation thread safety issue
* Fixed a memory leak in tls13_generate_secret
* Fixed reported performance degradation on aarch64. Restored the
implementation prior to commit 2621751 ("aes/asm/aesv8-armx.pl: avoid
32-bit lane assignment in CTR mode") for 64bit targets only, since it is
reportedly 2-17% slower and the silicon errata only affects 32bit targets.
The new algorithm is still used for 32 bit targets.
* Added a missing header for memcmp that caused compilation failure on some
platforms
OBS-URL: https://build.opensuse.org/request/show/1032887
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=121
- Update to 1.1.1n: [bsc#1196877, CVE-2022-0778]
* Security fix [CVE-2022-0778]: Infinite loop for non-prime moduli
in BN_mod_sqrt() reachable when parsing certificates.
* Add ciphersuites based on DHE_PSK (RFC 4279) and ECDHE_PSK
(RFC 5489) to the list of ciphersuites providing Perfect Forward
Secrecy as required by SECLEVEL >= 3.
* Rebase openssl-1.1.1-fips.patch openssl-1.1.1-evp-kdf.patch
OBS-URL: https://build.opensuse.org/request/show/961990
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=109
- Security fix: [bsc#1192820, CVE-2002-20001]
* Fix DHEATER: The Diffie-Hellman Key Agreement Protocol allows
remote attackers (from the client side) to send arbitrary
numbers that are actually not public keys, and trigger
expensive server-side DHE calculation.
* Stop recommending the DHE in SSL_DEFAULT_SUSE_CIPHER_LIST
* Rebase openssl-DEFAULT_SUSE_cipher.patch
- Fix the engines section in /etc/ssl/openssl.cnf [bsc#1194187]
* In an INI-type file, the sections begin with a [section_name]
and they run until the next section begins.
* Rebase openssl-1_1-use-include-directive.patch
OBS-URL: https://build.opensuse.org/request/show/960455
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=107
- Added openssl-1_1-use-include-directive.patch so that the default
/etc/ssl/openssl.cnf file will include any configuration files that
other packages might place into /etc/ssl/engines.d/ and
/etc/ssl/engdef.d/ This is a fix for bsc#1004463 where scripting was
being used to modify the openssl.cnf file. The scripting would fail
if either the default openssl.cnf file, or the sample openssl-ibmca
configuration file would be changed by upstream.
- Updated spec file to create the two new necessary directores for
the above patch.
OBS-URL: https://build.opensuse.org/request/show/936137
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=100
- Add support for livepatches (jsc#SLE-20049).
- Generate ipa-clones tarball artifact when livepatching is enabled.
Userspace Livepatching allows your application to be updated without restarting. For a library to be livepatchable, it has to be compiled with special flags (-fpatchable-functions-entry=X,Y).
To aid the development of livepatches, ipa-clones are also generated in the build process and packed into a livepatch tarball. This tarball is meant to be used by developers during their workflow: these files contains log of changes that gcc did in the compiled code that may change code layout, which must be accounted when developing a livepatch. For instance, livepatching a function which is inlined requires livepatching every function that calls it. Tools that use such files already exists in kernel-livepatching and we aim porting them to userspace livepatching as well.
OBS-URL: https://build.opensuse.org/request/show/930969
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=99
- Update to 1.1.1j
* Fixed the X509_issuer_and_serial_hash() function. It attempts
to create a unique hash value based on the issuer and serial
number data contained within an X509 certificate. However it
was failing to correctly handle any errors that may occur
while parsing the issuer field [bsc#1182331, CVE-2021-23841]
* Fixed the RSA_padding_check_SSLv23() function and the
RSA_SSLV23_PADDING padding mode to correctly check for
rollback attacks.
* Fixed the EVP_CipherUpdate, EVP_EncryptUpdate and
EVP_DecryptUpdate functions. Previously they could overflow the
output length argument in some cases where the input length is
close to the maximum permissable length for an integer on the
platform. In such cases the return value from the function call
would be 1 (indicating success), but the output length value
would be negative. This could cause applications to behave
incorrectly or crash. [bsc#1182333, CVE-2021-23840]
* Fixed SRP_Calc_client_key so that it runs in constant time.
The previous implementation called BN_mod_exp without setting
BN_FLG_CONSTTIME. This could be exploited in a side channel
attack to recover the password. Since the attack is local host
only this is outside of the current OpenSSL threat model and
therefore no CVE is assigned.
- Rebase patches:
* openssl-1.1.1-fips.patch
* openssl-1.1.0-issuer-hash.patch
* openssl-1.1.1-evp-kdf.patch
- Add version guards for the crypto-policies
OBS-URL: https://build.opensuse.org/request/show/873674
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=85
- Update to 1.1.1g
* Fixed segmentation fault in SSL_check_chain (CVE-2020-1967, bsc#1169407)
Server or client applications that call the SSL_check_chain() function
during or after a TLS 1.3 handshake may crash due to a NULL pointer
dereference as a result of incorrect handling of the
"signature_algorithms_cert" TLS extension. The crash occurs if an invalid
or unrecognised signature algorithm is received from the peer. This could
be exploited by a malicious peer in a Denial of Service attack.
* Added AES consttime code for no-asm configurations
an optional constant time support for AES was added
when building openssl for no-asm.
- refresh patches:
* openssl-1.1.1-fips.patch
* openssl-1.1.1-fips-crng-test.patch
OBS-URL: https://build.opensuse.org/request/show/796077
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=68
- Update to 1.1.1e
* Properly detect EOF while reading in libssl. Previously if we hit an EOF
while reading in libssl then we would report an error back to the
application (SSL_ERROR_SYSCALL) but errno would be 0. We now add
an error to the stack (which means we instead return SSL_ERROR_SSL) and
therefore give a hint as to what went wrong.
* Check that ed25519 and ed448 are allowed by the security level. Previously
signature algorithms not using an MD were not being checked that they were
allowed by the security level.
* Fixed SSL_get_servername() behaviour. The behaviour of SSL_get_servername()
was not quite right. The behaviour was not consistent between resumption
and normal handshakes, and also not quite consistent with historical
behaviour. The behaviour in various scenarios has been clarified and
it has been updated to make it match historical behaviour as closely as
possible.
* Corrected the documentation of the return values from the EVP_DigestSign*
set of functions. The documentation mentioned negative values for some
errors, but this was never the case, so the mention of negative values
was removed.
* Added a new method to gather entropy on VMS, based on SYS$GET_ENTROPY.
The presence of this system service is determined at run-time.
* Added newline escaping functionality to a filename when using openssl dgst.
This output format is to replicate the output format found in the '*sum'
checksum programs. This aims to preserve backward compatibility.
* Print all values for a PKCS#12 attribute with 'openssl pkcs12', not just
the first value.
- Update bunch of patches as the internal crypto headers got reorganized
- drop openssl-1_1-CVE-2019-1551.patch (upstream)
- openssl dgst: default to SHA256 only when called without a digest,
OBS-URL: https://build.opensuse.org/request/show/786956
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=65
