pool/openvswitch
SHA256
2
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Accepting request 107677 from home:dmacvicar:branches:network

Browse Source 
- Rewrite the package based on the debian version instead
  * current package was tied to xenserver config without
    even requiring it
  * instead of one big package depending even on qt4, there
    are -switch, -controller, -test subpackages now

OBS-URL: https://build.opensuse.org/request/show/107677
OBS-URL: https://build.opensuse.org/package/show/network/openvswitch?expand=0&rev=7
This commit is contained in:
Marcus Meissner 2012-03-14 10:03:21 +00:00 committed by Git OBS Bridge
parent 24ccc2b149
commit 1c3f3a7814
9 changed files with 831 additions and 84 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
README.packager Normal file
View File

@ -0,0 +1,17 @@
This package is based on the Debian openvswitch package as the
original openvswitch package in the build service was next to useless
due of being based on the xenserver/ directory of the sources, which
tied the package completely to xen.
Also, the original package was one big package depending even on Qt4.
This package splits in varius subpackages.
The xen part was removed. If it needs to be added again, it needs to
be its subpackage.
TODO:
- [DONE] sysconfig is bogus, as the init scripts do not source it yet (uses debian defaults file)
- pki component does not have the postun postin scripts yet

25
openvswitch-1.3.0-suse.patch
View File

@ -1,25 +0,0 @@
diff -ruN openvswitch-1.3.0/xenserver/automake.mk openvswitch-1.3.0/xenserver/automake.mk
--- openvswitch-1.3.0/xenserver/automake.mk 2011-11-14 19:41:33.000000000 +0100
+++ openvswitch-1.3.0/xenserver/automake.mk 2011-12-26 02:00:39.809040879 +0100
@@ -16,6 +16,7 @@
xenserver/etc_profile.d_openvswitch.sh \
xenserver/etc_xapi.d_plugins_openvswitch-cfg-update \
xenserver/etc_xensource_scripts_vif \
+ xenserver/etc_sysconfig_openvswitch \
xenserver/openvswitch-xen.spec \
xenserver/opt_xensource_libexec_InterfaceReconfigure.py \
xenserver/opt_xensource_libexec_InterfaceReconfigureBridge.py \
diff -ruN openvswitch-1.3.0/xenserver/etc_sysconfig_openvswitch openvswitch-1.3.0/xenserver/etc_sysconfig_openvswitch
--- openvswitch-1.3.0/xenserver/etc_sysconfig_openvswitch 1970-01-01 01:00:00.000000000 +0100
+++ openvswitch-1.3.0/xenserver/etc_sysconfig_openvswitch 2011-12-26 01:57:23.778834435 +0100
@@ -0,0 +1,10 @@
+### Configuration options for openvswitch
+
+# Copyright (C) 2009, 2010 Nicira Networks, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved. This file is offered as-is,
+# without warranty of any kind.
+
+NETWORK_MODE=openvswitch

274
openvswitch-controller.init Normal file
View File

@ -0,0 +1,274 @@
#!/bin/sh
#
# Copyright (c) 2011 Nicira Networks Inc.
# Copyright (c) 2007, 2009 Javier Fernandez-Sanguino <jfs@debian.org>
#
# This is free software; you may redistribute it and/or modify
# it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2,
# or (at your option) any later version.
#
# This is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License with
# the Debian operating system, in /usr/share/common-licenses/GPL; if
# not, write to the Free Software Foundation, Inc., 59 Temple Place,
# Suite 330, Boston, MA 02111-1307 USA
#
### BEGIN INIT INFO
# Provides: openvswitch-controller
# Required-Start: $network $local_fs $remote_fs
# Required-Stop: $remote_fs
# Should-Start: $named
# Should-Stop: $null
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Open vSwitch controller
### END INIT INFO
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/bin/ovs-controller # Introduce the server's location here
NAME=ovs-controller # Introduce the short server's name here
DESC=ovs-controller # Introduce a short description here
LOGDIR=/var/log/openvswitch # Log directory to use
PIDFILE=/var/run/openvswitch/$NAME.pid
test -x $DAEMON || exit 0
. /lib/lsb/init-functions
# Default options, these can be overriden by the information
# at /etc/default/openvswitch-controller
DAEMON_OPTS="" # Additional options given to the server
DODTIME=10 # Time to wait for the server to die, in seconds
# If this value is set too low you might not
# let some servers to die gracefully and
# 'restart' will not work
LOGFILE=$LOGDIR/$NAME.log # Server logfile
#DAEMONUSER= # User to run the daemons as. If this value
# is set start-stop-daemon will chuid the server
# Include defaults if available
default=/etc/default/openvswitch-controller
if [ -f $default ] ; then
. $default
fi
# Check that the user exists (if we set a user)
# Does the user exist?
if [ -n "$DAEMONUSER" ] ; then
if getent passwd | grep -q "^$DAEMONUSER:"; then
# Obtain the uid and gid
DAEMONUID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $3}'`
DAEMONGID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $4}'`
else
log_failure_msg "The user $DAEMONUSER, required to run $NAME does not exist."
exit 1
fi
fi
set -e
running_pid() {
# Check if a given process pid's cmdline matches a given name
pid=$1
name=$2
[ -z "$pid" ] && return 1
[ ! -d /proc/$pid ] && return 1
cmd=`cat /proc/$pid/cmdline | tr "\000" "\n"|head -n 1 |cut -d : -f 1`
# Is this the expected server
[ "$cmd" != "$name" ] && return 1
return 0
}
running() {
# Check if the process is running looking at /proc
# (works for all users)
# No pidfile, probably no daemon present
[ ! -f "$PIDFILE" ] && return 1
pid=`cat $PIDFILE`
running_pid $pid $DAEMON || return 1
return 0
}
start_server() {
if [ -z "$LISTEN" ]; then
echo "$default: No connection methods configured, controller disabled" >&2
exit 0
fi
if [ ! -d /var/run/openvswitch ]; then
install -d -m 755 -o root -g root /var/run/openvswitch
fi
SSL_OPTS=
case $LISTEN in
*ssl*)
: ${PRIVKEY:=/etc/openvswitch-controller/privkey.pem}
: ${CERT:=/etc/openvswitch-controller/cert.pem}
: ${CACERT:=/etc/openvswitch-controller/cacert.pem}
if test ! -e "$PRIVKEY" || test ! -e "$CERT" ||
test ! -e "$CACERT"; then
if test ! -e "$PRIVKEY"; then
echo "$PRIVKEY: private key missing" >&2
fi
if test ! -e "$CERT"; then
echo "$CERT: certificate for private key missing" >&2
fi
if test ! -e "$CACERT"; then
echo "$CACERT: CA certificate missing" >&2
fi
exit 1
fi
SSL_OPTS="--private-key=$PRIVKEY --certificate=$CERT --ca-cert=$CACERT"
;;
esac
# Start the process using the wrapper
if [ -z "$DAEMONUSER" ] ; then
start-stop-daemon --start --pidfile $PIDFILE \
--exec $DAEMON -- --detach --pidfile=$PIDFILE \
$LISTEN $DAEMON_OPTS $SSL_OPTS
errcode=$?
else
# if we are using a daemonuser then change the user id
start-stop-daemon --start --quiet --pidfile $PIDFILE \
--chuid $DAEMONUSER --exec $DAEMON -- \
--detach --pidfile=$PIDFILE $LISTEN $DAEMON_OPTS \
$SSL_OPTS
errcode=$?
fi
return $errcode
}
stop_server() {
# Stop the process using the wrapper
if [ -z "$DAEMONUSER" ] ; then
start-stop-daemon --stop --quiet --pidfile $PIDFILE \
--exec $DAEMON
errcode=$?
else
# if we are using a daemonuser then look for process that match
start-stop-daemon --stop --quiet --pidfile $PIDFILE \
--user $DAEMONUSER --exec $DAEMON
errcode=$?
fi
return $errcode
}
reload_server() {
[ ! -f "$PIDFILE" ] && return 1
pid=`cat $PIDFILE` # This is the daemon's pid
# Send a SIGHUP
kill -1 $pid
return $?
}
force_stop() {
# Force the process to die killing it manually
[ ! -e "$PIDFILE" ] && return
if running ; then
kill -15 $pid
# Is it really dead?
sleep "$DODTIME"
if running ; then
kill -9 $pid
sleep "$DODTIME"
if running ; then
echo "Cannot kill $NAME (pid=$pid)!"
exit 1
fi
fi
fi
rm -f $PIDFILE
}
case "$1" in
start)
log_daemon_msg "Starting $DESC " "$NAME"
# Check if it's running first
if running ; then
log_progress_msg "apparently already running"
log_end_msg 0
exit 0
fi
if start_server && running ; then
# It's ok, the server started and is running
log_end_msg 0
else
# Either we could not start it or it is not running
# after we did
# NOTE: Some servers might die some time after they start,
# this code does not try to detect this and might give
# a false positive (use 'status' for that)
log_end_msg 1
fi
;;
stop)
log_daemon_msg "Stopping $DESC" "$NAME"
if running ; then
# Only stop the server if we see it running
stop_server
log_end_msg $?
else
# If it's not running don't do anything
log_progress_msg "apparently not running"
log_end_msg 0
exit 0
fi
;;
force-stop)
# First try to stop gracefully the program
$0 stop
if running; then
# If it's still running try to kill it more forcefully
log_daemon_msg "Stopping (force) $DESC" "$NAME"
force_stop
log_end_msg $?
fi
;;
restart|force-reload)
log_daemon_msg "Restarting $DESC" "$NAME"
stop_server
# Wait some sensible amount, some server need this
[ -n "$DODTIME" ] && sleep $DODTIME
start_server
running
log_end_msg $?
;;
status)
log_daemon_msg "Checking status of $DESC" "$NAME"
if running ; then
log_progress_msg "running"
log_end_msg 0
else
log_progress_msg "apparently not running"
log_end_msg 1
exit 1
fi
;;
# Use this if the daemon cannot reload
reload)
log_warning_msg "Reloading $NAME daemon: not implemented, as the daemon"
log_warning_msg "cannot re-read the config file (use restart)."
;;
*)
N=/etc/init.d/openvswitch-controller
echo "Usage: $N {start|stop|force-stop|restart|force-reload|status}" >&2
exit 1
;;
esac
exit 0

187
openvswitch-ipsec.init Normal file
View File

@ -0,0 +1,187 @@
#!/bin/sh
#
# Copyright (c) 2007, 2009 Javier Fernandez-Sanguino <jfs@debian.org>
#
# This is free software; you may redistribute it and/or modify
# it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2,
# or (at your option) any later version.
#
# This is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License with
# the Debian operating system, in /usr/share/common-licenses/GPL; if
# not, write to the Free Software Foundation, Inc., 59 Temple Place,
# Suite 330, Boston, MA 02111-1307 USA
#
### BEGIN INIT INFO
# Provides: openvswitch-ipsec
# Required-Start: $network $local_fs $remote_fs openvswitch-switch
# Required-Stop: $remote_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Open vSwitch GRE-over-IPsec daemon
### END INIT INFO
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/share/openvswitch/scripts/ovs-monitor-ipsec # Daemon's location
NAME=ovs-monitor-ipsec # Introduce the short server's name here
LOGDIR=/var/log/openvswitch # Log directory to use
PIDFILE=/var/run/openvswitch/$NAME.pid
test -x $DAEMON || exit 0
. /lib/lsb/init-functions
DODTIME=10 # Time to wait for the server to die, in seconds
# If this value is set too low you might not
# let some servers to die gracefully and
# 'restart' will not work
set -e
running_pid() {
# Check if a given process pid's cmdline matches a given name
pid=$1
name=$2
[ -z "$pid" ] && return 1
[ ! -d /proc/$pid ] && return 1
cmd=`cat /proc/$pid/cmdline | tr "\000" " "|cut -d " " -f 2`
# Is this the expected server
[ "$cmd" != "$name" ] && return 1
return 0
}
running() {
# Check if the process is running looking at /proc
# (works for all users)
# No pidfile, probably no daemon present
[ ! -f "$PIDFILE" ] && return 1
pid=`cat $PIDFILE`
running_pid $pid $DAEMON || return 1
return 0
}
start_server() {
if [ ! -d /var/run/openvswitch ]; then
install -d -m 755 -o root -g root /var/run/openvswitch
fi
/usr/share/openvswitch/scripts/ovs-monitor-ipsec \
--pidfile=$PIDFILE --log-file --detach --monitor \
unix:/var/run/openvswitch/db.sock
return 0
}
stop_server() {
if [ -e $PIDFILE ]; then
kill `cat $PIDFILE`
fi
return 0
}
force_stop() {
# Force the process to die killing it manually
[ ! -e "$PIDFILE" ] && return
if running ; then
kill -15 $pid
# Is it really dead?
sleep "$DODTIME"
if running ; then
kill -9 $pid
sleep "$DODTIME"
if running ; then
echo "Cannot kill $NAME (pid=$pid)!"
exit 1
fi
fi
fi
rm -f $PIDFILE
}
case "$1" in
start)
log_daemon_msg "Starting $NAME"
# Check if it's running first
if running ; then
log_progress_msg "apparently already running"
log_end_msg 0
exit 0
fi
if start_server && running ; then
# It's ok, the server started and is running
log_end_msg 0
else
# Either we could not start it or it is not running
# after we did
# NOTE: Some servers might die some time after they start,
# this code does not try to detect this and might give
# a false positive (use 'status' for that)
log_end_msg 1
fi
;;
stop)
log_daemon_msg "Stopping $NAME"
if running ; then
# Only stop the server if we see it running
stop_server
log_end_msg $?
else
# If it's not running don't do anything
log_progress_msg "apparently not running"
log_end_msg 0
exit 0
fi
;;
force-stop)
# First try to stop gracefully the program
$0 stop
if running; then
# If it's still running try to kill it more forcefully
log_daemon_msg "Stopping (force) $NAME"
force_stop
log_end_msg $?
fi
;;
restart|force-reload)
log_daemon_msg "Restarting $NAME"
stop_server
# Wait some sensible amount, some server need this
[ -n "$DODTIME" ] && sleep $DODTIME
start_server
running
log_end_msg $?
;;
status)
log_daemon_msg "Checking status of $NAME"
if running ; then
log_progress_msg "running"
log_end_msg 0
else
log_progress_msg "apparently not running"
log_end_msg 1
exit 1
fi
;;
# Use this if the daemon cannot reload
reload)
log_warning_msg "Reloading $NAME daemon: not implemented, as the daemon"
log_warning_msg "cannot re-read the config file (use restart)."
;;
*)
N=/etc/init.d/openvswitch-ipsec
echo "Usage: $N {start|stop|force-stop|restart|force-reload|status}" >&2
exit 1
;;
esac
exit 0

102
openvswitch-switch.init Normal file
View File

@ -0,0 +1,102 @@
#! /bin/sh
#
# Copyright (C) 2011 Nicira Networks, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
### BEGIN INIT INFO
# Provides: openvswitch-switch
# Required-Start: $network $named $remote_fs $syslog
# Required-Stop: $remote_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Open vSwitch switch
### END INIT INFO
(test -x /usr/sbin/ovs-vswitchd && test -x /usr/sbin/ovsdb-server) || exit 0
. /usr/share/openvswitch/scripts/ovs-lib
test -e /etc/sysconfig/openvswitch-switch && . /etc/sysconfig/openvswitch-switch
if test X"$BRCOMPAT" = Xyes && test ! -x /usr/sbin/ovs-brcompatd; then
BRCOMPAT=no
log_warning_msg "ovs-brcompatd missing, disabling bridge compatibility"
fi
ovs_ctl () {
set /usr/share/openvswitch/scripts/ovs-ctl "$@"
if test X"$BRCOMPAT" = Xyes; then
set "$@" --brcompat
fi
"$@"
}
load_kmod () {
ovs_ctl load-kmod || exit $?
}
start () {
if ovs_ctl load-kmod; then
:
else
echo "Module has probably not been built for this kernel."
if ! test -d /usr/share/doc/openvswitch-datapath-source; then
echo "Install the openvswitch-datapath-source package, then read"
else
echo "For instructions, read"
fi
echo "/usr/share/doc/openvswitch-datapath-source/README.Debian"
fi
set ovs_ctl ${1-start} --system-id=random
if test X"$FORCE_COREFILES" != X; then
set "$@" --force-corefiles="$FORCE_COREFILES"
fi
"$@" || exit $?
ovs_ctl --protocol=gre enable-protocol
}
stop () {
ovs_ctl stop
}
case $1 in
start)
start
;;
stop | force-stop)
stop
;;
reload | force-reload)
# The OVS daemons keep up-to-date.
;;
restart)
stop
start
;;
status)
ovs_ctl status
;;
force-reload-kmod)
start force-reload-kmod
;;
load-kmod)
load_kmod
;;
*)
echo "Usage: $0 {start|stop|restart|force-reload|status|force-stop|force-reload-kmod|load-kmod}" >&2
exit 1
;;
esac
exit 0

17
openvswitch-switch.logrotate Normal file
View File

@ -0,0 +1,17 @@
/var/log/openvswitch/*.log {
daily
compress
create 640 root adm
delaycompress
missingok
rotate 30
postrotate
# Tell Open vSwitch daemons to reopen their log files
if [ -e /var/run/openvswitch/ovs-vswitchd.pid ]; then
ovs-appctl --t ovs-vswitchd vlog/reopen
fi
if [ -e /var/run/openvswitch/ovsdb-server.pid ]; then
ovs-appctl --t ovsdb-server vlog/reopen
fi
endscript
}

8
openvswitch-switch.template Normal file
View File

@ -0,0 +1,8 @@
# This is a POSIX shell fragment -*- sh -*-
# FORCE_COREFILES: If 'yes' then core files will be enabled.
# FORCE_COREFILES=yes
# BRCOMPAT: If 'yes' and the openvswitch-brcompat package is installed, then
# Linux bridge compatibility will be enabled.
# BRCOMPAT=no

9
openvswitch.changes
View File

@ -1,3 +1,12 @@
-------------------------------------------------------------------
Thu Mar 1 13:35:52 UTC 2012 - dmacvicar@suse.de
- Rewrite the package based on the debian version instead
* current package was tied to xenserver config without
even requiring it
* instead of one big package depending even on qt4, there
are -switch, -controller, -test subpackages now
-------------------------------------------------------------------
Mon Feb 20 23:39:50 UTC 2012 - on@morlock.nu

276
openvswitch.spec
View File

@ -30,8 +30,14 @@ Url: http://openswitch.org/
Group: Productivity/Networking/System
Source0: %name-%version.tar.bz2
Source1: preamble
Source2: openvswitch-switch.init
Source3: openvswitch-switch.template
Source4: openvswitch-switch.logrotate
Source5: openvswitch-controller.init
# PATCH-FEATURE-OPENSUSE openvswitch-1.3.0-suse.patch -- /etc/sysconfig configuration options for openvswitch
Patch0: %name-1.3.0-suse.patch
#Patch0: %name-1.3.0-suse.patch
# PATCH-FEATURE-UPSTREAM openvswitch-1.1.0-stp-fwd-delay.patch -- Set STP bridge forward delay
Patch1: %name-1.1.0-stp-fwd-delay.patch
BuildRequires: autoconf automake libtool
@ -85,9 +91,112 @@ BuildRequires: %kernel_module_package_buildreqs
Kernel modules supporting the openvswitch datapath
%endif
%package common
Requires: python-argparse
Suggests: ethtool
Summary: Open vSwitch common components
%description common
openvswitch-common provides components required by both openvswitch-switch
and openvswitch-controller.
Open vSwitch is a full-featured software-based Ethernet switch.
%package ipsec
Summary: Open vSwitch GRE-over-IPsec support
Requires: python
Requires: ipsec-tools >= 0.8
Requires: racoon >= 0.8
Requires: openvswitch-common = %{version}
Requires: openvswitch-switch = %{version}
Requires: python-openvswitch = %{version}
%description ipsec
The ovs-monitor-ipsec script provides support for encrypting GRE
tunnels with IPsec.
Open vSwitch is a full-featured software-based Ethernet switch.
%package switch
#Suggests: openvswitch-datapath-module
PreReq: %insserv_prereq %fillup_prereq
Requires: openvswitch-common = %{version}
Requires: module-init-tools
Requires: procps
Requires: uuid-runtime
Requires: python
Summary: Open vSwitch switch implementations
%description switch
openvswitch-switch provides the userspace components and utilities for
he Open vSwitch kernel-based switch.
Open vSwitch is a full-featured software-based Ethernet switch.
%package pki
Requires: openvswitch-common = %{version}
Summary: Open vSwitch public key infrastructure dependency package
%description pki
openvswitch-pki provides PKI (public key infrastructure) support for
Open vSwitch switches and controllers, reducing the risk of
man-in-the-middle attacks on the Open vSwitch network infrastructure.
Open vSwitch is a full-featured software-based Ethernet switch.
%package controller
Requires: openvswitch-common = %{version}
Summary: Open vSwitch controller implementation
%description controller
The Open vSwitch controller enables OpenFlow switches that connect to it
to act as MAC-learning Ethernet switches.
Open vSwitch is a full-featured software-based Ethernet switch.
%package brcompat
Requires: openvswitch-switch = %{version}
Recommends: bridge-utils
Summary: Open vSwitch bridge compatibility support
%description brcompat
openvswitch-brcompat provides a way for applications that use the
Linux bridge to gradually migrate to Open vSwitch. Programs that
ordinarily control the Linux bridge module, such as "brctl", instead
control the Open vSwitch kernel-based switch.
Once this package is installed, adding BRCOMPAT=yes in
/etc/default/openvswitch-switch enables bridge compatibility.
Open vSwitch is a full-featured software-based Ethernet switch.
%package -n python-openvswitch
Requires: python
Summary: Python bindings for Open vSwitch
%description -n python-openvswitch
This package contains the full Python bindings for Open vSwitch database.
%package -n ovsdbmonitor
Requires: python-openvswitch
Requires: python-pyasn1
Summary: Open vSwitch graphical monitoring tool
%description -n ovsdbmonitor
This package is a GUI tool for monitoring and troubleshooting local
or remote Open vSwitch installations. It presents GUI tables that
graphically represent an Open vSwitch kernel flow table (similar to
"ovs-dpctl dump-flows") and Open vSwitch database contents (similar
to "ovs-vsctl list <table>").
Open vSwitch is a full-featured software-based Ethernet switch.
%package test
Requires: python-twisted-web
Requires: python
Requires: python-argparse
Summary: Open vSwitch test package
%description test
This package contains utilities that are useful to diagnose
performance and connectivity issues in Open vSwitch setup.
Open vSwitch is a full-featured software-based Ethernet switch.
%prep
%setup -q
%patch0 -p1
#%patch0 -p1
%patch1 -p1
set -- *
@ -136,81 +245,130 @@ pushd source
%makeinstall
install -d -m 755 %{buildroot}/%_sysconfdir/init.d
install -d -m 755 %{buildroot}/var/adm/fillup-templates
install -m 644 xenserver/etc_sysconfig_%{name} \
%{buildroot}/var/adm/fillup-templates/sysconfig.%{name}
install -m 755 xenserver/etc_init.d_%{name} \
%{buildroot}/%_sysconfdir/init.d/%{name}
install -m 755 xenserver/etc_init.d_%{name}-xapi-update \
%{buildroot}/%_sysconfdir/init.d/%{name}-xapi-update
install -m 644 %SOURCE3 \
%{buildroot}/var/adm/fillup-templates/sysconfig.%{name}-switch
install -m 755 %SOURCE2 \
%{buildroot}/%_sysconfdir/init.d/%{name}-switch
install -m 755 %SOURCE5 \
%{buildroot}/%_sysconfdir/init.d/%{name}-controller
install -d -m 755 %{buildroot}/%_sysconfdir/sysconfig
install -d -m 755 %{buildroot}/%_sysconfdir/logrotate.d
install -m 644 xenserver/etc_logrotate.d_%{name} \
%{buildroot}/%_sysconfdir/logrotate.d/%{name}
install -m 644 %SOURCE4 \
%{buildroot}/%_sysconfdir/logrotate.d/%{name}-switch
install -d -m 755 %{buildroot}/%_sysconfdir/profile.d
install -m 644 xenserver/etc_profile.d_%{name}.sh \
%{buildroot}/%_sysconfdir/profile.d/%{name}.sh
install -d -m 755 %{buildroot}/%_sysconfdir/xapi.d/plugins
install -m 755 xenserver/etc_xapi.d_plugins_%{name}-cfg-update \
%{buildroot}/%_sysconfdir/xapi.d/plugins/%{name}-cfg-update
install -d -m 755 %{buildroot}/%{_datadir}/%{name}/scripts
install -m 644 vswitchd/vswitch.ovsschema \
%{buildroot}/%{_datadir}/%{name}/vswitch.ovsschema
install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
%{buildroot}/%{_datadir}/%{name}/scripts/interface-reconfigure
install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigure.py \
%{buildroot}/%{_datadir}/%{name}/scripts/InterfaceReconfigure.py
install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureBridge.py \
%{buildroot}/%{_datadir}/%{name}/scripts/InterfaceReconfigureBridge.py
install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py \
%{buildroot}/%{_datadir}/%{name}/scripts/InterfaceReconfigureVswitch.py
install -m 755 xenserver/etc_xensource_scripts_vif \
%{buildroot}/%{_datadir}/%{name}/scripts/vif
install -m 644 xenserver/usr_share_%{name}_scripts_sysconfig.template \
%{buildroot}/%{_datadir}/%{name}/scripts/sysconfig.template
install -d -m 755 %{buildroot}/%{_libdir}/xsconsole/plugins-base
install -m 644 \
xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
%{buildroot}/%{_libdir}/xsconsole/plugins-base/XSFeatureVSwitch.py
# install -m 644 xenserver/uuid.py %{buildroot}/%{_datadir}/%{name}/python
popd
%{__mkdir_p} %{buildroot}%{py_sitedir}
mv %{buildroot}%{_datadir}/%{name}/python/* %{buildroot}%{py_sitedir}
rmdir %{buildroot}%{_datadir}/%{name}/python
%clean
%{?buildroot:%__rm -rf "%{buildroot}"}
%post
%{fillup_and_insserv openvswitch}
%post switch
%{fillup_and_insserv openvswitch-switch}
%preun
%stop_on_removal openvswitch
%preun switch
%stop_on_removal openvswitch-switch
%files
%files brcompat
%defattr(-,root,root)
%{_sbindir}/ovs-brcompatd
%{_mandir}/man8/ovs-brcompatd.8.gz
%files common
%defattr(-,root,root)
%dir %{_datadir}/openvswitch
%doc source/AUTHORS source/DESIGN source/INSTALL.* source/NOTICE
%doc source/REPORTING-BUGS source/PORTING
%doc source/SubmittingPatches source/CodingStyle source/README
%doc source/WHY-OVS source/COPYING source/README-gcov
%_bindir/ovs*
%_sbindir/ovs-brcompatd
%_sbindir/ovsdb-server
%_sbindir/ovs-vlan-bug-workaround
%_sbindir/ovs-vswitchd
%_sbindir/ovs-bugtool
%_datadir/%name
%_mandir/man1/*
%_mandir/man5/*
%_mandir/man8/*
%_sysconfdir/init.d/openvswitch
%_sysconfdir/init.d/openvswitch-xapi-update
%config %_sysconfdir/logrotate.d/openvswitch
%_sysconfdir/profile.d/openvswitch.sh
%dir %_sysconfdir/xapi.d
%dir %dir %_sysconfdir/xapi.d/plugins
%dir %_libdir/xsconsole/
%dir %_libdir/xsconsole/plugins-base/
%_sysconfdir/xapi.d/plugins/openvswitch-cfg-update
#_sysconfdir/openvswitch
%_libdir/xsconsole/plugins-base/XSFeatureVSwitch.py
/var/adm/fillup-templates/sysconfig.openvswitch
%{_bindir}/ovs-appctl
%{_bindir}/ovs-benchmark
%{_bindir}/ovs-ofctl
%{_bindir}/ovs-parse-leaks
%{_bindir}/ovsdb-client
%{_sbindir}/ovs-bugtool
%{_sbindir}/ovs-vlan-bug-workaround
%dir %{_datadir}/openvswitch/scripts
%{_datadir}/openvswitch/bugtool-plugins
%{_datadir}/openvswitch/scripts/ovs-bugtool-cfm-show
%{_datadir}/openvswitch/scripts/ovs-bugtool-lacp-show
%{_datadir}/openvswitch/scripts/ovs-bugtool-tc-class-show
%{_datadir}/openvswitch/scripts/ovs-bugtool-ovsdb-dump
%{_mandir}/man1/ovs-benchmark.1.gz
%{_mandir}/man1/ovsdb-client.1.gz
%{_mandir}/man8/ovs-appctl.8.gz
%{_mandir}/man8/ovs-bugtool.8.gz
%{_mandir}/man8/ovs-ofctl.8.gz
%{_mandir}/man8/ovs-parse-leaks.8.gz
%{_mandir}/man8/ovs-vlan-bug-workaround.8.gz
%files pki
%{_mandir}/man8/ovs-pki.8.gz
%{_bindir}/ovs-pki
%files controller
%defattr(-,root,root)
%{_bindir}/ovs-controller
%{_sysconfdir}/init.d/openvswitch-controller
%{_mandir}/man8/ovs-controller.8.gz
%files -n python-openvswitch
%defattr(-,root,root)
%dir %{py_sitedir}/ovs
%{py_sitedir}/ovs/*
%files switch
%defattr(-,root,root)
%{_bindir}/ovs-dpctl
%{_bindir}/ovs-pcap
%{_bindir}/ovs-tcpundump
%{_bindir}/ovs-vlan-test
%{_bindir}/ovs-vsctl
%{_bindir}/ovsdb-tool
%{_sbindir}/ovs-vswitchd
%{_sbindir}/ovsdb-server
%{_datadir}/openvswitch/scripts/ovs-ctl
%{_datadir}/openvswitch/scripts/ovs-lib
%{_datadir}/openvswitch/scripts/ovs-save
%{_datadir}/openvswitch/vswitch.ovsschema
/var/adm/fillup-templates/sysconfig.openvswitch-switch
%{_sysconfdir}/init.d/openvswitch-switch
%{_sysconfdir}/logrotate.d/openvswitch-switch
%{_mandir}/man8/ovs-dpctl.8.gz
%{_mandir}/man1/ovs-pcap.1.gz
%{_mandir}/man1/ovs-tcpundump.1.gz
%{_mandir}/man8/ovs-vlan-test.8.gz
%{_mandir}/man8/ovs-vsctl.8.gz
%{_mandir}/man1/ovsdb-tool.1.gz
%{_mandir}/man8/ovs-vswitchd.8.gz
%{_mandir}/man1/ovsdb-server.1.gz
%{_mandir}/man5/ovs-vswitchd.conf.db.5.gz
%{_mandir}/man8/ovs-ctl.8.gz
%files test
%defattr(-,root,root)
%{_bindir}/ovs-test
%dir %{py_sitedir}/ovstest
%{py_sitedir}/ovstest/*
%{_mandir}/man8/ovs-test.8.gz
%files -n ovsdbmonitor
%defattr(-,root,root)
%{_bindir}/ovsdbmonitor
%dir %{_datadir}/openvswitch/ovsdbmonitor
%{_datadir}/openvswitch/ovsdbmonitor/*
%{_mandir}/man1/ovsdbmonitor.1.gz
%changelog