2021-09-19 13:55:20 +02:00
-------------------------------------------------------------------
Sun Sep 16 07:44:07 UTC 2021 - Cliff Zhao <qzhao@suse.com>
- Add plymouth-watermark-config.patch: Add two-step watermark theme
config support, make the plymouth-branding easy to work
(bsc#1189613).
2021-09-10 07:12:32 +02:00
-------------------------------------------------------------------
Thu Sep 6 08:42:26 UTC 2021 - Cliff Zhao <qzhao@suse.com>
- Add plymouth-set-default-theme-suse-branding.patch: set plymouth's
default theme to openSUSE/SUSE branding assigned style to avoid
screen mass(bsc#1189613).
- Update plymouth.spec: Rearrange plymouth sub packages dependencies
to avoid installation failures due to a race installation state
which will leading theme display fault(1189613).
Accepting request 914979 from home:pandom79
- Update to version 0.9.5~git20210406.e554475:
* systemd: Add plymouth-switch-root-initramfs.service to switch back to initramfs on shutdown
* main: Add a plymouthd-fd-escrow helper
* main: Dump debug log to plymouth-shutdown-debug.log on shutdown/reboot
* main: Cleanly quit on SIGTERM
* main: Only mark plymouthd as unkillable when running from the initrd
* ply-device-manager: Don't deactivate renderers from ply_device_manager_free ()
* details: Clear newly added text-display before replaying log messages
* text/tribar: Fix ply_boot_splash_hide () not clearing the terminal
* ply-text-display: Fix bottom pixels of fbcon not getting cleared
* ply-text-display: Only skip clearing the screen when tracing to a terminal
* main: Redirect stdio/stderr to null when tracing to a file
* ply-logger: Add a ply_is_tracing_to_terminal () helper
* main: Retain splash on on_show_splash() and on_hide_splash()
* ply-device-manager: Fix bad assertion
* two-step: Links against libintl.so if LNS
* Added translation using Weblate (Sinhala)
* Translated using Weblate (Serbian)
* Translated using Weblate (Dutch)
* Translated using Weblate (Basque)
* Translated using Weblate (Russian)
* Translated using Weblate (Hungarian)
* Translated using Weblate (Hebrew)
* Translated using Weblate (Chinese (Simplified) (zh_CN))
* Translated using Weblate (Esperanto)
* Translated using Weblate (Malay)
* Translated using Weblate (Punjabi)
* Translated using Weblate (Indonesian)
* Translated using Weblate (Danish)
* Translated using Weblate (French)
* Translated using Weblate (Swedish)
* Translated using Weblate (Italian)
* Translated using Weblate (French)
* Translated using Weblate (German)
* The use of AM_GNU_GETTEXT_VERSION in configure.ac instructs autopoint to copy po/Makefile.in.in from the exact gettext version. It is fine if the version of gettext installed on the system has the same minor version number with the requested version, but it fails if you have a newer version of gettext because of the mismatch between autoconf macros and Makefile.in.in.
* ply-device-manager: Speed up DRM-connector probing
* ply-device-manager: add a verify_add_or_change() helper
* ply-device-manager: push udev_device_get_devnode call up into on_udev_event
* two-step: Fix unused variable compiler warning
* scripts: Remove new-object.sh
* two-step: Only create background_bgrt_fallback_image if use_firmware_background is set
* two-step: Always load the BGRT fallback image
* Fix BGRT fallback rendering
* systemd: switch to KillMode=mixed
* Use fallback image if BGRT is not supported
* client: Don't wait forever for a ping reply
* Revert "Don't wait forever for a ping reply."
* Don't wait forever for a ping reply.
* Translated using Weblate (Portuguese (Brazil))
* Translated using Weblate (Chinese (Simplified))
* Translated using Weblate (Ukrainian)
* Translated using Weblate (Polish)
* Translated using Weblate (Turkish)
* Update translation files
* boot-server: Handle client disconnecting while trigger pending
* boot-server: Ref count the connections
* Update translations from Zanata
* drm: Honor modes selected by the user through video= kernel cmdline argument
* NL translation update
* use resolution of higher res monitor for window size
* Initialize the translations on start if they are available
* Use the correct key name for title and subtitle
* autogoo: use /proc/self/fd/0 instead of /dev/stdin
* configure: bump to 0.9.6
* Apply suggestion to .gitlab-ci.yml
* ci: Add a `distcheck` step
* Add CI pipeline for Plymouth
* configure: quiet a warning
* po: drop intltool usage
* docs: fix man page cross-reference
* Rename 'percent_done' to 'fraction_done'
* main: Don't bail out of load_settings if "Theme" is missing
* main: fix mode changing before splash is shown
* main: switch log file when switching mode
* two-step: Center message text within labels if labels are centered
* po: add Indonesian translation
* drm: Do not unnecessarily get output info twice
* ply-device-manager: Only consume one udev event at a time
* two-step: Do not jump to end-animation on halt/reboot if it is disabled
* Add RemainAfterExit=yes to plymouth's systemd service files
* two-step: Add UseEndAnimation setting
* script: add Image.Crop(x, y, width, height)
* ply-throbber: Do not redraw when we need to stop throbbing on free
* ply-keymap-icon: Do not draw on free
* ply-capslock-icon: Do not draw on free
* script: add missing unref() for system update func
* themes: Drop UseFirmwareBackground=true from spinner/bgrt firmware-upgrade settings
* Fix SetSystemUpdateFunction
* event-loop: Remove ply_trace calls around the disconnect handler
* event-loop: Fix debug-log "failed to delete fd # from epoll watch list" spam
* terminal-session: Drop unnecessary grantpt() call.
* build-goo: Remove vestigial remnants of old GDM integration code.
* main: Add state variable splash_is_becoming_idle
* configure: Update bug report URL.
* drm: Remove reset_scan_out_buffer_if_needed() prototype declaration
* drm: Remove unnecessary next_node helper variable
* two-step: Remove unnecessary next_node helper variable
* Allow running plymouth-populate-initrd in a cross-compiler environment
* throbgress: Remove the throbgress plugin
* drm: Remove explicit set_scan_out_buffer() from activate()
* drm: Mark buffer as clean in ply_renderer_head_new()
* two-step: Fix wrong horizontal position of bgrt logo on left-side-up LCD panels
* two-step: Change keyboard-indicator positioning to fixed offset below dialog
* themes: spinner/bgrt: Modify password dialog to match gnome 3.34 changes
* gitignore: Add translation related generated files to .gitignore
* two-step: Remove workaround for upside-down panels
* drm: Keep hw-rotation on devices with upside down LCD panels
* drm: Add get_primary_plane_rotation() helper function
* systemd-ask-password-plymouth.service.in: Do not hardcode /run path to pid file
* scripts: Add a logrotate file for /var/log/boot.log
* drm: Install our fb after drawing to it
* drm: Delay installing our framebuffer until the first draw
* configure: Make runtimedir configurable
* ply-pixel-buffer: Fix bottom edge rendering of scaled buffers
* themes: Add images for keyboard indicator support to spinner and spinfinity
* two-step: Add Keyboard layout indicator support
* capslock-icon: Draw the icon on show
* libply-splash-graphics: Add new keymap-icon control
* scripts: Add keymap-render.py script
* renderer: Add ply_renderer_get_keymap function
* terminal: add ply_terminal_get_keymap function
* key-file: Add support for non ini style config files
* x11-render-plugin: Use GTK 3.22's method to get screen size to avoid deprecate warning in compile.
* space-flares: Fix compiler warning
* ply-utils: Drop unused ply_string_has_prefix helper
* main: Use ply_kernel_command_line_get_key_value where appropriate
* ply-utils: Add ply_kernel_command_line_get_key_value helper
* two-step: Merge show_password_prompt and show_prompt into 1 function
* twp-step: Remove superflous is_hidden / is_stopped checks from on_draw
* two-step: Cleanup stop_animation function
* two-step: Group progress_animaton init together with creation
* themes: Move spinifity from the throbgress splash to the two-step splash
* two-step: Add new UseAnimation setting
* two-step: Make progress-bar location and size configurable
* two-step: Fix progress-bar not hiding when it should
* two-step: Fix progress-bar not updating on normal boot
* two-step: Fold ply_progress_animation_hide call into view_start_end_animation
* two-step: Add a capslock indicator
* two-step: Use new ply_key_file_get_* helpers to read theme file
* libply: Add ply_key_file_get_long() function
* libply: Add ply_key_file_get_double() function
* libply: Add ply_key_file_get_raw_value() helper
* libply-splash-graphics: Add new capslock-icon control
* ply-renderer: Add ply_renderer_get_capslock_state function
* terminal: add ply_terminal_get_capslock_state function
* label: Properly deal with pixel-buffers with non-upright device_rotation
* ply-device-manager: De-activate and close renderer on device hot unplug
* script: Add image tile support.
* Translations: Sync l10n.gnome.org's translation.
* Translation: Adjust the Turkish translation(tr.po), it's better to keep all po files in the /po directory together.
* plymouthd.defaults: Bump default DeviceTimeout to 8 seconds
* Update tr.po
* two-step: bgrt: Add workaround for desktops which do not use the golden ratio
* Revert "Merge branch 'avoid_shutdown_failure_v2' into 'master'"
* ply-utils: Drop ply_fd_can_take_data and ply_fd_may_block function Since it is from a bygone time which is no longer in use.
* ply-utils: Get rid of unused old code, drop function ply_get_max_open_fds, ply_close_open_fds, ply_close_all_fds.
* scripts: update file plymouth.spec to integrate recent fixes.
* ply-systemd-units: Drop attach-session in systemd-units to avoid the failure of unmounting separate /var during poweroff.
* two-step: Deal with buggy firmware which does not pre-rotate the bgrt image
* Revert "Merge branch 'bugfix' into 'master'"
* ply-utils: Drop ply_fd_can_take_data and ply_fd_may_block function Since it is from a bygone time which is no longer in use.
* configure: bump so name
* ply terminal session: Drop function ply_terminal_session_execute and ply_terminal_session_open_console, Since this is a feature from a bygone time which is no longer in use without ply_terminal_session_run.
* Internationalization: Add zh_HK and zh_TW translations.
* ply terminal session: Drop ply_terminal_session_run, this is a feature from a bygone time which is no longer in use
* Regenerate plymouth.pot
* two-step: Add support for firmware-splashes with rotation status bits set
* Unify all code's vi format control. Update several file's vi format control line to make it easy to maintain.
* ply-text-display.c: Correct vi format line make vi can directly edit this file without errors and make it use 8 space tabs etc.
* Add a new firmware-upgrade mode for use by fwupd
* drm: Fix tiled mode detection
* Translation: Update plymouth.pot's misc infomation plymouth.pot is using old Bugzilla as issue discussing URL, update it to Gitlab, and also correct other translation files which already been traslated.
* main.c: Deprecate gdm transition signal
* themes: Update spinner and bgrt background settings
* Translations: Sync translations with zanata
* ply-pixel-buffer: Fix right and bottom edge rendering of scaled buffers
* Sync translations with zanata
* Add support for translating the user visible strings in some themes
* Prefix Title and Subtitle theme config keywords with an underscore
* Add new reboot and system-upgrade modes
* main: Remove private ply_mode_t
* two-step: Make ProgressBarShowPercentComplete a per mode setting
* plymouthd.defaults: Change default ShowDelay to 0
* ply-boot-splash: Do not add ply_boot_splash_update_progress timeout multiple times
* logging: Minor log-message fixes
* logging: Improve logging format
* themes: Update spinner and bgrt theme offline updates mode
* two-step: Add a per mode setting to suppress messages
* two-step: Add progress-bar support
* two-step: Add MessageBelowAnimation option
* two-step: Add support for specifying a title and sub-title in the theme file
* two-step: Add per mode settings
* two-step: Drop background_is_bgrt view_t member
* ply-progress-bar: Allow caller to specify the widgets width and height
* ply-progress-bar: Allow choosing fore- and back-ground color
* ply-progress-bar: Redraw on percentage update
* ply-label: Make sure get_width_of_control / get_height_of_control return correct values
* boot-server: fix type confusion when allocating connection object
* ply-device-manager: Handle change events for monitor hotplugging
* ply-device-manager: Consume all events in one go
* drm: Stop limiting preferred-mode picking to UEFI systems
* drm: Reset mode on display-port connected outputs with a bad link-status
* drm: Implement handle_change_event
* drm: Ensure heads are mapped before flushing them
* drm: Allow calling create_heads_for_active_connectors multiple times
* drm: Allow calling ply_renderer_head_add_connector with existing connector_id
* drm: Limit backend->resources lifetime to within query_device
* drm: Store and keep all the outputs in the backend
* drm: Add get_output_info helper function
* drm: Stop storing a pointer to drmModeConnector in ply_output_t
* drm: Stop keeing a drmModeConnector instance around
* drm: Refactor ply_renderer_head_add_connector and ply_renderer_head_new
* ply-renderer: Add ply_renderer_handle_change_event function
* ply-array: Add ply_array_contains_uint32_element function
* themes: Update spinner and bgrt diskcrypt dialog
* themes: spinner: Add watermark alignment settings
* themes: bgrt: Remove duplicate images
* plymouth-populate-initrd: Don't assume the ImageDir is the theme-dir
* two-step: Make clearing the dialog-background when using the firmware background optional
* two-step: Add support for non center alignment of the (diskcrypt) dialog
* two-step: Make the box image surrounding the unlock dialog optional
* two-step: Rename UseBGRT to UseFirmwareBackground
* libply: Add ply_key_file_get_bool function
* two-step: Use plymouth_strtod
* libply: Add ply_strtod helper
* ply-keyboard: Fix compiler warning
* device-manager: free keyboards when deactivating a renderer
* keyboard: add helper to get the keyboard's renderer, if applicable
* drm: Pick a controller for unconfigured connectors
* drm: Drop crtcs for clones for which we've picked different modes
* drm: More connector enumeration refactoring
* drm: Store tiled and rotation in ply_output_t
* drm: Refactor create_heads_for_active_connectors
* drm: Directly store the mode instead of the mode_index
* drm: Drop unused encoder_id
* two-step: Do not rotate bgrt background image for upside-down panels
* themes: Add new BGRT theme, using the firmware boot splash as background
* two-step: bgrt: Deal with quirky firmwares
* two-step: Add ACPI BGRT extension support
* two-step: Speed up background-tile drawing on HiDPI screens
* two-step: Use a pixel-buffer instead of an image for the view's background
* ply-pixel-display: Add ply_pixel_display_get_device_scale() function
* ply-pixel-buffer: Add ply_pixel_buffer_rotate_upright helper
* ply-pixel-buffer: Add ply_pixel_buffer_get/set_device_rotation helpers
* ply-pixel-buffer: Fix marking buffers as opaque when doing a solid fill
* ply-pixel-buffer: Fix fill_with_buffer fastpath when device_scale != 1
* drm: Implement ply_renderer_get_panel_properties
* ply-renderer: Add ply_renderer_get_panel_properties function
* ply-image: Add support for loading BMPs
* ply-image: Do not assume all files are PNGs
* two-step: Fix crash asking for password with multiple heads
* spinner theme: update
* two-step: Fix animation not starting on later added heads
* ply-device-manager: Fix race causing undesired creation of non-gfx devs
* logger: Add a separator between different boot logs
* systemd-units: Also add "ConditionVirtualization=!container" in systemd-ask-password-plymouth.path.in
* configure: bump to 0.9.5
* drm: Use preferred mode for outputs instead of current mode
* drm: Refactor ply_renderer_connector_get_rotation
* drm: Reset LUT/gamma table before the first drmModeSetCrtc call
* libply: Move kernel commandline parsing functions to libply/ply-utils
* throbber: Don't skip last frame when waiting for end.
* boot-server: free the argument and triggers
* script: fix various memory leaks
* key-file: ply_key_file_get_value returns duplicated memory, don't leak
* event-loop: fix leak in error path
* boot-splash: fix memory leak in error path
* populate-initrd: drop unused local variable
* device-manager: don't watch for udev events when deactivated
* main: ensure tty is closed on deactivate
OBS-URL: https://build.opensuse.org/request/show/914979
OBS-URL: https://build.opensuse.org/package/show/Base:System/plymouth?expand=0&rev=303
2021-08-31 15:47:39 +02:00
-------------------------------------------------------------------
2021-08-31 16:32:59 +02:00
Tue Aug 31 14:13:20 UTC 2021 - Cliff Zhao <qzhao@suse.com>
- Add plymouth-keep-KillMode-none.patch: Keep the plymouth-start.service
KillMode=none. The new mothod of "mixed" KillMode could not work
with current edition of systemd and will block system boot
(bsc#1177082 bsc#1184087 boo#1182145).
- Update plymouth-dracut-path.patch: Make it could apply to prior
update edition.
-------------------------------------------------------------------
Accepting request 914979 from home:pandom79
- Update to version 0.9.5~git20210406.e554475:
* systemd: Add plymouth-switch-root-initramfs.service to switch back to initramfs on shutdown
* main: Add a plymouthd-fd-escrow helper
* main: Dump debug log to plymouth-shutdown-debug.log on shutdown/reboot
* main: Cleanly quit on SIGTERM
* main: Only mark plymouthd as unkillable when running from the initrd
* ply-device-manager: Don't deactivate renderers from ply_device_manager_free ()
* details: Clear newly added text-display before replaying log messages
* text/tribar: Fix ply_boot_splash_hide () not clearing the terminal
* ply-text-display: Fix bottom pixels of fbcon not getting cleared
* ply-text-display: Only skip clearing the screen when tracing to a terminal
* main: Redirect stdio/stderr to null when tracing to a file
* ply-logger: Add a ply_is_tracing_to_terminal () helper
* main: Retain splash on on_show_splash() and on_hide_splash()
* ply-device-manager: Fix bad assertion
* two-step: Links against libintl.so if LNS
* Added translation using Weblate (Sinhala)
* Translated using Weblate (Serbian)
* Translated using Weblate (Dutch)
* Translated using Weblate (Basque)
* Translated using Weblate (Russian)
* Translated using Weblate (Hungarian)
* Translated using Weblate (Hebrew)
* Translated using Weblate (Chinese (Simplified) (zh_CN))
* Translated using Weblate (Esperanto)
* Translated using Weblate (Malay)
* Translated using Weblate (Punjabi)
* Translated using Weblate (Indonesian)
* Translated using Weblate (Danish)
* Translated using Weblate (French)
* Translated using Weblate (Swedish)
* Translated using Weblate (Italian)
* Translated using Weblate (French)
* Translated using Weblate (German)
* The use of AM_GNU_GETTEXT_VERSION in configure.ac instructs autopoint to copy po/Makefile.in.in from the exact gettext version. It is fine if the version of gettext installed on the system has the same minor version number with the requested version, but it fails if you have a newer version of gettext because of the mismatch between autoconf macros and Makefile.in.in.
* ply-device-manager: Speed up DRM-connector probing
* ply-device-manager: add a verify_add_or_change() helper
* ply-device-manager: push udev_device_get_devnode call up into on_udev_event
* two-step: Fix unused variable compiler warning
* scripts: Remove new-object.sh
* two-step: Only create background_bgrt_fallback_image if use_firmware_background is set
* two-step: Always load the BGRT fallback image
* Fix BGRT fallback rendering
* systemd: switch to KillMode=mixed
* Use fallback image if BGRT is not supported
* client: Don't wait forever for a ping reply
* Revert "Don't wait forever for a ping reply."
* Don't wait forever for a ping reply.
* Translated using Weblate (Portuguese (Brazil))
* Translated using Weblate (Chinese (Simplified))
* Translated using Weblate (Ukrainian)
* Translated using Weblate (Polish)
* Translated using Weblate (Turkish)
* Update translation files
* boot-server: Handle client disconnecting while trigger pending
* boot-server: Ref count the connections
* Update translations from Zanata
* drm: Honor modes selected by the user through video= kernel cmdline argument
* NL translation update
* use resolution of higher res monitor for window size
* Initialize the translations on start if they are available
* Use the correct key name for title and subtitle
* autogoo: use /proc/self/fd/0 instead of /dev/stdin
* configure: bump to 0.9.6
* Apply suggestion to .gitlab-ci.yml
* ci: Add a `distcheck` step
* Add CI pipeline for Plymouth
* configure: quiet a warning
* po: drop intltool usage
* docs: fix man page cross-reference
* Rename 'percent_done' to 'fraction_done'
* main: Don't bail out of load_settings if "Theme" is missing
* main: fix mode changing before splash is shown
* main: switch log file when switching mode
* two-step: Center message text within labels if labels are centered
* po: add Indonesian translation
* drm: Do not unnecessarily get output info twice
* ply-device-manager: Only consume one udev event at a time
* two-step: Do not jump to end-animation on halt/reboot if it is disabled
* Add RemainAfterExit=yes to plymouth's systemd service files
* two-step: Add UseEndAnimation setting
* script: add Image.Crop(x, y, width, height)
* ply-throbber: Do not redraw when we need to stop throbbing on free
* ply-keymap-icon: Do not draw on free
* ply-capslock-icon: Do not draw on free
* script: add missing unref() for system update func
* themes: Drop UseFirmwareBackground=true from spinner/bgrt firmware-upgrade settings
* Fix SetSystemUpdateFunction
* event-loop: Remove ply_trace calls around the disconnect handler
* event-loop: Fix debug-log "failed to delete fd # from epoll watch list" spam
* terminal-session: Drop unnecessary grantpt() call.
* build-goo: Remove vestigial remnants of old GDM integration code.
* main: Add state variable splash_is_becoming_idle
* configure: Update bug report URL.
* drm: Remove reset_scan_out_buffer_if_needed() prototype declaration
* drm: Remove unnecessary next_node helper variable
* two-step: Remove unnecessary next_node helper variable
* Allow running plymouth-populate-initrd in a cross-compiler environment
* throbgress: Remove the throbgress plugin
* drm: Remove explicit set_scan_out_buffer() from activate()
* drm: Mark buffer as clean in ply_renderer_head_new()
* two-step: Fix wrong horizontal position of bgrt logo on left-side-up LCD panels
* two-step: Change keyboard-indicator positioning to fixed offset below dialog
* themes: spinner/bgrt: Modify password dialog to match gnome 3.34 changes
* gitignore: Add translation related generated files to .gitignore
* two-step: Remove workaround for upside-down panels
* drm: Keep hw-rotation on devices with upside down LCD panels
* drm: Add get_primary_plane_rotation() helper function
* systemd-ask-password-plymouth.service.in: Do not hardcode /run path to pid file
* scripts: Add a logrotate file for /var/log/boot.log
* drm: Install our fb after drawing to it
* drm: Delay installing our framebuffer until the first draw
* configure: Make runtimedir configurable
* ply-pixel-buffer: Fix bottom edge rendering of scaled buffers
* themes: Add images for keyboard indicator support to spinner and spinfinity
* two-step: Add Keyboard layout indicator support
* capslock-icon: Draw the icon on show
* libply-splash-graphics: Add new keymap-icon control
* scripts: Add keymap-render.py script
* renderer: Add ply_renderer_get_keymap function
* terminal: add ply_terminal_get_keymap function
* key-file: Add support for non ini style config files
* x11-render-plugin: Use GTK 3.22's method to get screen size to avoid deprecate warning in compile.
* space-flares: Fix compiler warning
* ply-utils: Drop unused ply_string_has_prefix helper
* main: Use ply_kernel_command_line_get_key_value where appropriate
* ply-utils: Add ply_kernel_command_line_get_key_value helper
* two-step: Merge show_password_prompt and show_prompt into 1 function
* twp-step: Remove superflous is_hidden / is_stopped checks from on_draw
* two-step: Cleanup stop_animation function
* two-step: Group progress_animaton init together with creation
* themes: Move spinifity from the throbgress splash to the two-step splash
* two-step: Add new UseAnimation setting
* two-step: Make progress-bar location and size configurable
* two-step: Fix progress-bar not hiding when it should
* two-step: Fix progress-bar not updating on normal boot
* two-step: Fold ply_progress_animation_hide call into view_start_end_animation
* two-step: Add a capslock indicator
* two-step: Use new ply_key_file_get_* helpers to read theme file
* libply: Add ply_key_file_get_long() function
* libply: Add ply_key_file_get_double() function
* libply: Add ply_key_file_get_raw_value() helper
* libply-splash-graphics: Add new capslock-icon control
* ply-renderer: Add ply_renderer_get_capslock_state function
* terminal: add ply_terminal_get_capslock_state function
* label: Properly deal with pixel-buffers with non-upright device_rotation
* ply-device-manager: De-activate and close renderer on device hot unplug
* script: Add image tile support.
* Translations: Sync l10n.gnome.org's translation.
* Translation: Adjust the Turkish translation(tr.po), it's better to keep all po files in the /po directory together.
* plymouthd.defaults: Bump default DeviceTimeout to 8 seconds
* Update tr.po
* two-step: bgrt: Add workaround for desktops which do not use the golden ratio
* Revert "Merge branch 'avoid_shutdown_failure_v2' into 'master'"
* ply-utils: Drop ply_fd_can_take_data and ply_fd_may_block function Since it is from a bygone time which is no longer in use.
* ply-utils: Get rid of unused old code, drop function ply_get_max_open_fds, ply_close_open_fds, ply_close_all_fds.
* scripts: update file plymouth.spec to integrate recent fixes.
* ply-systemd-units: Drop attach-session in systemd-units to avoid the failure of unmounting separate /var during poweroff.
* two-step: Deal with buggy firmware which does not pre-rotate the bgrt image
* Revert "Merge branch 'bugfix' into 'master'"
* ply-utils: Drop ply_fd_can_take_data and ply_fd_may_block function Since it is from a bygone time which is no longer in use.
* configure: bump so name
* ply terminal session: Drop function ply_terminal_session_execute and ply_terminal_session_open_console, Since this is a feature from a bygone time which is no longer in use without ply_terminal_session_run.
* Internationalization: Add zh_HK and zh_TW translations.
* ply terminal session: Drop ply_terminal_session_run, this is a feature from a bygone time which is no longer in use
* Regenerate plymouth.pot
* two-step: Add support for firmware-splashes with rotation status bits set
* Unify all code's vi format control. Update several file's vi format control line to make it easy to maintain.
* ply-text-display.c: Correct vi format line make vi can directly edit this file without errors and make it use 8 space tabs etc.
* Add a new firmware-upgrade mode for use by fwupd
* drm: Fix tiled mode detection
* Translation: Update plymouth.pot's misc infomation plymouth.pot is using old Bugzilla as issue discussing URL, update it to Gitlab, and also correct other translation files which already been traslated.
* main.c: Deprecate gdm transition signal
* themes: Update spinner and bgrt background settings
* Translations: Sync translations with zanata
* ply-pixel-buffer: Fix right and bottom edge rendering of scaled buffers
* Sync translations with zanata
* Add support for translating the user visible strings in some themes
* Prefix Title and Subtitle theme config keywords with an underscore
* Add new reboot and system-upgrade modes
* main: Remove private ply_mode_t
* two-step: Make ProgressBarShowPercentComplete a per mode setting
* plymouthd.defaults: Change default ShowDelay to 0
* ply-boot-splash: Do not add ply_boot_splash_update_progress timeout multiple times
* logging: Minor log-message fixes
* logging: Improve logging format
* themes: Update spinner and bgrt theme offline updates mode
* two-step: Add a per mode setting to suppress messages
* two-step: Add progress-bar support
* two-step: Add MessageBelowAnimation option
* two-step: Add support for specifying a title and sub-title in the theme file
* two-step: Add per mode settings
* two-step: Drop background_is_bgrt view_t member
* ply-progress-bar: Allow caller to specify the widgets width and height
* ply-progress-bar: Allow choosing fore- and back-ground color
* ply-progress-bar: Redraw on percentage update
* ply-label: Make sure get_width_of_control / get_height_of_control return correct values
* boot-server: fix type confusion when allocating connection object
* ply-device-manager: Handle change events for monitor hotplugging
* ply-device-manager: Consume all events in one go
* drm: Stop limiting preferred-mode picking to UEFI systems
* drm: Reset mode on display-port connected outputs with a bad link-status
* drm: Implement handle_change_event
* drm: Ensure heads are mapped before flushing them
* drm: Allow calling create_heads_for_active_connectors multiple times
* drm: Allow calling ply_renderer_head_add_connector with existing connector_id
* drm: Limit backend->resources lifetime to within query_device
* drm: Store and keep all the outputs in the backend
* drm: Add get_output_info helper function
* drm: Stop storing a pointer to drmModeConnector in ply_output_t
* drm: Stop keeing a drmModeConnector instance around
* drm: Refactor ply_renderer_head_add_connector and ply_renderer_head_new
* ply-renderer: Add ply_renderer_handle_change_event function
* ply-array: Add ply_array_contains_uint32_element function
* themes: Update spinner and bgrt diskcrypt dialog
* themes: spinner: Add watermark alignment settings
* themes: bgrt: Remove duplicate images
* plymouth-populate-initrd: Don't assume the ImageDir is the theme-dir
* two-step: Make clearing the dialog-background when using the firmware background optional
* two-step: Add support for non center alignment of the (diskcrypt) dialog
* two-step: Make the box image surrounding the unlock dialog optional
* two-step: Rename UseBGRT to UseFirmwareBackground
* libply: Add ply_key_file_get_bool function
* two-step: Use plymouth_strtod
* libply: Add ply_strtod helper
* ply-keyboard: Fix compiler warning
* device-manager: free keyboards when deactivating a renderer
* keyboard: add helper to get the keyboard's renderer, if applicable
* drm: Pick a controller for unconfigured connectors
* drm: Drop crtcs for clones for which we've picked different modes
* drm: More connector enumeration refactoring
* drm: Store tiled and rotation in ply_output_t
* drm: Refactor create_heads_for_active_connectors
* drm: Directly store the mode instead of the mode_index
* drm: Drop unused encoder_id
* two-step: Do not rotate bgrt background image for upside-down panels
* themes: Add new BGRT theme, using the firmware boot splash as background
* two-step: bgrt: Deal with quirky firmwares
* two-step: Add ACPI BGRT extension support
* two-step: Speed up background-tile drawing on HiDPI screens
* two-step: Use a pixel-buffer instead of an image for the view's background
* ply-pixel-display: Add ply_pixel_display_get_device_scale() function
* ply-pixel-buffer: Add ply_pixel_buffer_rotate_upright helper
* ply-pixel-buffer: Add ply_pixel_buffer_get/set_device_rotation helpers
* ply-pixel-buffer: Fix marking buffers as opaque when doing a solid fill
* ply-pixel-buffer: Fix fill_with_buffer fastpath when device_scale != 1
* drm: Implement ply_renderer_get_panel_properties
* ply-renderer: Add ply_renderer_get_panel_properties function
* ply-image: Add support for loading BMPs
* ply-image: Do not assume all files are PNGs
* two-step: Fix crash asking for password with multiple heads
* spinner theme: update
* two-step: Fix animation not starting on later added heads
* ply-device-manager: Fix race causing undesired creation of non-gfx devs
* logger: Add a separator between different boot logs
* systemd-units: Also add "ConditionVirtualization=!container" in systemd-ask-password-plymouth.path.in
* configure: bump to 0.9.5
* drm: Use preferred mode for outputs instead of current mode
* drm: Refactor ply_renderer_connector_get_rotation
* drm: Reset LUT/gamma table before the first drmModeSetCrtc call
* libply: Move kernel commandline parsing functions to libply/ply-utils
* throbber: Don't skip last frame when waiting for end.
* boot-server: free the argument and triggers
* script: fix various memory leaks
* key-file: ply_key_file_get_value returns duplicated memory, don't leak
* event-loop: fix leak in error path
* boot-splash: fix memory leak in error path
* populate-initrd: drop unused local variable
* device-manager: don't watch for udev events when deactivated
* main: ensure tty is closed on deactivate
OBS-URL: https://build.opensuse.org/request/show/914979
OBS-URL: https://build.opensuse.org/package/show/Base:System/plymouth?expand=0&rev=303
2021-08-31 15:47:39 +02:00
Wed Aug 18 07:52:38 UTC 2021 - pandom79@gmail.com
- Update to version 0.9.5~git20210406.e554475:
* systemd: Add plymouth-switch-root-initramfs.service to switch back to initramfs on shutdown
* main: Add a plymouthd-fd-escrow helper
* main: Dump debug log to plymouth-shutdown-debug.log on shutdown/reboot
* main: Cleanly quit on SIGTERM
* main: Only mark plymouthd as unkillable when running from the initrd
* ply-device-manager: Don't deactivate renderers from ply_device_manager_free ()
* details: Clear newly added text-display before replaying log messages
* text/tribar: Fix ply_boot_splash_hide () not clearing the terminal
* ply-text-display: Fix bottom pixels of fbcon not getting cleared
* ply-text-display: Only skip clearing the screen when tracing to a terminal
* main: Redirect stdio/stderr to null when tracing to a file
* ply-logger: Add a ply_is_tracing_to_terminal () helper
* main: Retain splash on on_show_splash() and on_hide_splash()
* ply-device-manager: Fix bad assertion
* two-step: Links against libintl.so if LNS
* The use of AM_GNU_GETTEXT_VERSION in configure.ac instructs autopoint to copy po/Makefile.in.in from the exact gettext version. It is fine if the version of gettext installed on the system has the same minor version number with the requested version, but it fails if you have a newer version of gettext because of the mismatch between autoconf macros and Makefile.in.in.
* ply-device-manager: Speed up DRM-connector probing
* ply-device-manager: add a verify_add_or_change() helper
* ply-device-manager: push udev_device_get_devnode call up into on_udev_event
* two-step: Fix unused variable compiler warning
* scripts: Remove new-object.sh
* two-step: Only create background_bgrt_fallback_image if use_firmware_background is set
* two-step: Always load the BGRT fallback image
* Fix BGRT fallback rendering
* systemd: switch to KillMode=mixed
* Use fallback image if BGRT is not supported
* client: Don't wait forever for a ping reply
* Revert "Don't wait forever for a ping reply."
* Don't wait forever for a ping reply.
* boot-server: Handle client disconnecting while trigger pending
* boot-server: Ref count the connections
* drm: Honor modes selected by the user through video= kernel cmdline argument
* use resolution of higher res monitor for window size
* Initialize the translations on start if they are available
* Use the correct key name for title and subtitle
* autogoo: use /proc/self/fd/0 instead of /dev/stdin
* configure: bump to 0.9.6
* Apply suggestion to .gitlab-ci.yml
* ci: Add a `distcheck` step
* Add CI pipeline for Plymouth
* configure: quiet a warning
* po: drop intltool usage
* docs: fix man page cross-reference
* Rename 'percent_done' to 'fraction_done'
* main: Don't bail out of load_settings if "Theme" is missing
* main: fix mode changing before splash is shown
* main: switch log file when switching mode
* two-step: Center message text within labels if labels are centered
* drm: Do not unnecessarily get output info twice
* ply-device-manager: Only consume one udev event at a time
* two-step: Do not jump to end-animation on halt/reboot if it is disabled
* Add RemainAfterExit=yes to plymouth's systemd service files
* two-step: Add UseEndAnimation setting
* script: add Image.Crop(x, y, width, height)
* ply-throbber: Do not redraw when we need to stop throbbing on free
* ply-keymap-icon: Do not draw on free
* ply-capslock-icon: Do not draw on free
* script: add missing unref() for system update func
* themes: Drop UseFirmwareBackground=true from spinner/bgrt firmware-upgrade settings
* Fix SetSystemUpdateFunction
* event-loop: Remove ply_trace calls around the disconnect handler
* event-loop: Fix debug-log "failed to delete fd # from epoll watch list" spam
* terminal-session: Drop unnecessary grantpt() call.
* build-goo: Remove vestigial remnants of old GDM integration code.
* main: Add state variable splash_is_becoming_idle
* configure: Update bug report URL.
* drm: Remove reset_scan_out_buffer_if_needed() prototype declaration
* drm: Remove unnecessary next_node helper variable
* two-step: Remove unnecessary next_node helper variable
* Allow running plymouth-populate-initrd in a cross-compiler environment
* throbgress: Remove the throbgress plugin
* drm: Remove explicit set_scan_out_buffer() from activate()
* drm: Mark buffer as clean in ply_renderer_head_new()
* two-step: Fix wrong horizontal position of bgrt logo on left-side-up LCD panels
* two-step: Change keyboard-indicator positioning to fixed offset below dialog
* themes: spinner/bgrt: Modify password dialog to match gnome 3.34 changes
* two-step: Remove workaround for upside-down panels
* drm: Keep hw-rotation on devices with upside down LCD panels
* drm: Add get_primary_plane_rotation() helper function
* systemd-ask-password-plymouth.service.in: Do not hardcode /run path to pid file
* scripts: Add a logrotate file for /var/log/boot.log
* drm: Install our fb after drawing to it
* drm: Delay installing our framebuffer until the first draw
* configure: Make runtimedir configurable
* ply-pixel-buffer: Fix bottom edge rendering of scaled buffers
* themes: Add images for keyboard indicator support to spinner and spinfinity
* two-step: Add Keyboard layout indicator support
* capslock-icon: Draw the icon on show
* libply-splash-graphics: Add new keymap-icon control
* scripts: Add keymap-render.py script
* renderer: Add ply_renderer_get_keymap function
* terminal: add ply_terminal_get_keymap function
* key-file: Add support for non ini style config files
* x11-render-plugin: Use GTK 3.22's method to get screen size to avoid deprecate warning in compile.
* space-flares: Fix compiler warning
* ply-utils: Drop unused ply_string_has_prefix helper
* main: Use ply_kernel_command_line_get_key_value where appropriate
* ply-utils: Add ply_kernel_command_line_get_key_value helper
* two-step: Merge show_password_prompt and show_prompt into 1 function
* twp-step: Remove superflous is_hidden / is_stopped checks from on_draw
* two-step: Cleanup stop_animation function
* two-step: Group progress_animaton init together with creation
* themes: Move spinifity from the throbgress splash to the two-step splash
* two-step: Add new UseAnimation setting
* two-step: Make progress-bar location and size configurable
* two-step: Fix progress-bar not hiding when it should
* two-step: Fix progress-bar not updating on normal boot
* two-step: Fold ply_progress_animation_hide call into view_start_end_animation
* two-step: Add a capslock indicator
* two-step: Use new ply_key_file_get_* helpers to read theme file
* libply: Add ply_key_file_get_long() function
* libply: Add ply_key_file_get_double() function
* libply: Add ply_key_file_get_raw_value() helper
* libply-splash-graphics: Add new capslock-icon control
* ply-renderer: Add ply_renderer_get_capslock_state function
* terminal: add ply_terminal_get_capslock_state function
* label: Properly deal with pixel-buffers with non-upright device_rotation
* ply-device-manager: De-activate and close renderer on device hot unplug
* script: Add image tile support.
* plymouthd.defaults: Bump default DeviceTimeout to 8 seconds
* Update tr.po
* two-step: bgrt: Add workaround for desktops which do not use the golden ratio
* Revert "Merge branch 'avoid_shutdown_failure_v2' into 'master'"
* ply-utils: Drop ply_fd_can_take_data and ply_fd_may_block function Since it is from a bygone time which is no longer in use.
* ply-utils: Get rid of unused old code, drop function ply_get_max_open_fds, ply_close_open_fds, ply_close_all_fds.
* scripts: update file plymouth.spec to integrate recent fixes.
* ply-systemd-units: Drop attach-session in systemd-units to avoid the failure of unmounting separate /var during poweroff.
* two-step: Deal with buggy firmware which does not pre-rotate the bgrt image
* Revert "Merge branch 'bugfix' into 'master'"
* ply-utils: Drop ply_fd_can_take_data and ply_fd_may_block function Since it is from a bygone time which is no longer in use.
* configure: bump so name
* ply terminal session: Drop function ply_terminal_session_execute and ply_terminal_session_open_console, Since this is a feature from a bygone time which is no longer in use without ply_terminal_session_run.
* ply terminal session: Drop ply_terminal_session_run, this is a feature from a bygone time which is no longer in use
* Regenerate plymouth.pot
* two-step: Add support for firmware-splashes with rotation status bits set
* Unify all code's vi format control. Update several file's vi format control line to make it easy to maintain.
* ply-text-display.c: Correct vi format line make vi can directly edit this file without errors and make it use 8 space tabs etc.
* Add a new firmware-upgrade mode for use by fwupd
* drm: Fix tiled mode detection
* main.c: Deprecate gdm transition signal
* themes: Update spinner and bgrt background settings
* ply-pixel-buffer: Fix right and bottom edge rendering of scaled buffers
* Add support for translating the user visible strings in some themes
* Prefix Title and Subtitle theme config keywords with an underscore
* Add new reboot and system-upgrade modes
* main: Remove private ply_mode_t
* two-step: Make ProgressBarShowPercentComplete a per mode setting
* plymouthd.defaults: Change default ShowDelay to 0
* ply-boot-splash: Do not add ply_boot_splash_update_progress timeout multiple times
* logging: Minor log-message fixes
* logging: Improve logging format
* themes: Update spinner and bgrt theme offline updates mode
* two-step: Add a per mode setting to suppress messages
* two-step: Add progress-bar support
* two-step: Add MessageBelowAnimation option
* two-step: Add support for specifying a title and sub-title in the theme file
* two-step: Add per mode settings
* two-step: Drop background_is_bgrt view_t member
* ply-progress-bar: Allow caller to specify the widgets width and height
* ply-progress-bar: Allow choosing fore- and back-ground color
* ply-progress-bar: Redraw on percentage update
* ply-label: Make sure get_width_of_control / get_height_of_control return correct values
* boot-server: fix type confusion when allocating connection object
* ply-device-manager: Handle change events for monitor hotplugging
* ply-device-manager: Consume all events in one go
* drm: Stop limiting preferred-mode picking to UEFI systems
* drm: Reset mode on display-port connected outputs with a bad link-status
* drm: Implement handle_change_event
* drm: Ensure heads are mapped before flushing them
* drm: Allow calling create_heads_for_active_connectors multiple times
* drm: Allow calling ply_renderer_head_add_connector with existing connector_id
* drm: Limit backend->resources lifetime to within query_device
* drm: Store and keep all the outputs in the backend
* drm: Add get_output_info helper function
* drm: Stop storing a pointer to drmModeConnector in ply_output_t
* drm: Stop keeing a drmModeConnector instance around
* drm: Refactor ply_renderer_head_add_connector and ply_renderer_head_new
* ply-renderer: Add ply_renderer_handle_change_event function
* ply-array: Add ply_array_contains_uint32_element function
* themes: Update spinner and bgrt diskcrypt dialog
* themes: spinner: Add watermark alignment settings
* themes: bgrt: Remove duplicate images
* plymouth-populate-initrd: Don't assume the ImageDir is the theme-dir
* two-step: Make clearing the dialog-background when using the firmware background optional
* two-step: Add support for non center alignment of the (diskcrypt) dialog
* two-step: Make the box image surrounding the unlock dialog optional
* two-step: Rename UseBGRT to UseFirmwareBackground
* libply: Add ply_key_file_get_bool function
* two-step: Use plymouth_strtod
* libply: Add ply_strtod helper
* ply-keyboard: Fix compiler warning
* device-manager: free keyboards when deactivating a renderer
* keyboard: add helper to get the keyboard's renderer, if applicable
* drm: Pick a controller for unconfigured connectors
* drm: Drop crtcs for clones for which we've picked different modes
* drm: More connector enumeration refactoring
* drm: Store tiled and rotation in ply_output_t
* drm: Refactor create_heads_for_active_connectors
* drm: Directly store the mode instead of the mode_index
* drm: Drop unused encoder_id
* two-step: Do not rotate bgrt background image for upside-down panels
* themes: Add new BGRT theme, using the firmware boot splash as background
* two-step: bgrt: Deal with quirky firmwares
* two-step: Add ACPI BGRT extension support
* two-step: Speed up background-tile drawing on HiDPI screens
* two-step: Use a pixel-buffer instead of an image for the view's background
* ply-pixel-display: Add ply_pixel_display_get_device_scale() function
* ply-pixel-buffer: Add ply_pixel_buffer_rotate_upright helper
* ply-pixel-buffer: Add ply_pixel_buffer_get/set_device_rotation helpers
* ply-pixel-buffer: Fix marking buffers as opaque when doing a solid fill
* ply-pixel-buffer: Fix fill_with_buffer fastpath when device_scale != 1
* drm: Implement ply_renderer_get_panel_properties
* ply-renderer: Add ply_renderer_get_panel_properties function
* ply-image: Add support for loading BMPs
* ply-image: Do not assume all files are PNGs
* two-step: Fix crash asking for password with multiple heads
* spinner theme: update
* two-step: Fix animation not starting on later added heads
* ply-device-manager: Fix race causing undesired creation of non-gfx devs
* logger: Add a separator between different boot logs
* systemd-units: Also add "ConditionVirtualization=!container" in systemd-ask-password-plymouth.path.in
* configure: bump to 0.9.5
* drm: Use preferred mode for outputs instead of current mode
* drm: Refactor ply_renderer_connector_get_rotation
* drm: Reset LUT/gamma table before the first drmModeSetCrtc call
* libply: Move kernel commandline parsing functions to libply/ply-utils
* throbber: Don't skip last frame when waiting for end.
* boot-server: free the argument and triggers
* script: fix various memory leaks
* key-file: ply_key_file_get_value returns duplicated memory, don't leak
* event-loop: fix leak in error path
* boot-splash: fix memory leak in error path
* populate-initrd: drop unused local variable
* device-manager: don't watch for udev events when deactivated
* main: ensure tty is closed on deactivate
2021-05-15 21:18:36 +02:00
-------------------------------------------------------------------
Fri May 14 14:19:22 UTC 2021 - Dominique Leuenberger <dimstar@opensuse.org>
- Do not own /usr/share/locale (owned by filesystem):
+ Split out -lang package
+ Use find_lang macro to create file list for -lang package
2021-02-15 16:37:24 +01:00
-------------------------------------------------------------------
2021-04-29 13:05:32 +02:00
Wed Feb 24 08:25:42 UTC 2021 - Cliff Zhao <qzhao@suse.com>
2021-02-24 07:49:09 +01:00
2021-04-29 13:05:32 +02:00
- Pickup plymouth-only_use_fb_for_cirrus_bochs.patch: Currently our
kernel hardware support need this fix, and boo#1172028 will be
fix seperately (bnc#888590 boo#1172028 bsc#1181913).
2021-02-24 07:49:09 +01:00
-------------------------------------------------------------------
Accepting request 889522 from home:qzhao:branches:Base:System
Disable plymouth-systemd-KillMode-mixed.patch: Temporary disable it, because aarch64 and ppc64le system could not booting in release period, and this is only a enhancement with no harm to rollback (bnc#1177082, bnc#1182145, bnc#1184087).
- Fix broken use of %service_add_post and %service_del_postun. Without
any services specified, the first is a no-op, the latter will only
execute systemctl daemon-reload (boo#1179849).
- Use %ldconfig_scriptlets macro in Tumbleweed
- Disable plymouth-ignore-serial-console.patch:
We could not totally disable serial, because S390 and some customer
are still rely on it (bnc#1180973, bnc#1181216).
- Update to version: 0.9.5+git20201026:
Don't wait forever for a ping reply.
- Add plymouth-disable-fedora-logo.patch:
Disable the image link which point to the fedora logo. this
modification will also avoid the failure report from build
checker.
- Add plymouth-ignore-serial-console.patch:
Don't output in serial console for openQA need to take serial in
the test, and yast-installation prgram has a feature to install
system through it (bnc#1051692 bnc#1164123 bnc#1170906).
- Update plymouth.spec: prepare usrmerge (boo#1029961)
- Update to version: 0.9.5+git20200921+20778f2:
* boot-server: Handle client disconnecting while trigger pending.
* boot-server: Ref count the connections.
* drm: Honor modes selected by the user through video= kernel
cmdline argument.
* use resolution of higher res monitor for window size.
* autogoo: use /proc/self/fd/0 instead of /dev/stdin.
* main: Don't bail out of load_settings if "Theme" is missing.
* main: switch log file when switching mode.
* main: fix mode changing before splash is shown.
* two-step: Center message text within labels if labels are
centered.
* drm/kms probe speedups.
* drm: Do not unnecessarily get output info twice.
* ply-device-manager: Only consume one udev event at a time.
* two-step: Do not jump to end-animation on halt/reboot if it is
disabled.
* two-step: Add UseEndAnimation setting.
* script: add Image.Crop(x, y, width, height).
* ply-throbber: Do not redraw when we need to stop throbbing on
free.
* ply-keymap-icon: Do not draw on free.
* ply-capslock-icon: Do not draw on free.
* script: add missing unref() for system update func.
* themes: Drop UseFirmwareBackground=true from spinner/bgrt
firmware-upgrade settings.
* Fix SetSystemUpdateFunction.
* event-loop: Remove ply_trace calls around the disconnect handler.
* ply-terminal-session: Not use grantpt when the system shut down.
to avoid sytem hung up.
* build-goo: Remove vestigial remnants of old GDM integration code.
- Drop plymouth-avoid-umount-hanging-shutdown.patch: because has
been merged to upstream.
- Remove gnu-unifont-bitmap-fonts runtime dependency, it is not
used anywhere.
- Remove unused kernel-headers and module-init-tools build deps.
- Make plymouth-scripts noarch, correct its runtime dependencies.
- Clean up spec file.
- Add plymouth-no-longer-modify-conf-to-drop-isopensuse-macro.patch:
plymouth will use plymouthd.defaults instead of plymouth.conf and
packge plymouthd.defaults in a seperet RPM. this can avoid change
SUSE or openSUSE branding section with is_opensuse macro in the
config file. means this modification can close the leaps gap
(jsc#SLE-11637).
- Update plymouth.spec: Dropping gdm transition because it has
alreay deprecated by upstream. Removing git build dependency.
- Drop plymouth-only_use_fb_for_cirrus_bochs.patch: openSUSE user
are using emu-5.0.0 on MacOS-X with HVF acceleration, the
Plymouth theme with script module fails to go to graphic mode
with this patch(boo#1172028).
- Avoid inconsistencies in library package names causing unresolvable
dependencies, replace all soversion occurences with a macro.
- Add patch plymouth-avoid-umount-hanging-shutdown.patch:
To avoid grantpt() call nsslookup, it will hanging system unmount
/var during shutdown period(bnc#1105688, bnc#1129386,
bnc#1134660, bnc#1166601, bnc#1171971).
- Update to version 0.9.5+git20190908+3abfab2:
* two-step: Deal with buggy firmware which does not pre-rotate the bgrt image
* configure: bump so name
* Internationalization: Add zh_HK and zh_TW translations.
* add delay time to 8 seconds to fit AMD graphic card.
- Update plymouth.spec: Disable upstart-monitor compile because it
only used in Ubuntu/Debian.
- Update plymouth.spec: Use bcond_with for X11 renderer, cleanup
syntax.
- Update plymouth.spec: obsolete plymouth render plugin for
Xwindows, Since this plugin will not be used in the production
environment, and this modify will highly decrease the compilation
of build requirements.
- Update to version 0.9.4+git20190612+9359382:
* two-step: Add support for firmware-splashes with rotation
status bits set
* Regenerate plymouth.pot to add the strings for the new
firmware-upgrade mode.
- Add dependency to dracut for plymouth-scripts(bnc#1138248).
- BuildRequire pkgconfig(systemd) instead of systemd: allow OBS to
shortcut the build queues by allowing usage of systemd-mini
- Change default openSUSE theme to bgrt
- Update to version 0.9.4+git20190325+b9f2aac:
* themes: Update spinner and bgrt background settings
* Translations: Sync translations with zanata
- Fix theme-bgrt dependencies
(based on plugin-two-step with images from theme-spinner)
- Update to version 0.9.4+git20181219.c8f1256:
* ply-pixel-buffer: Fix right and bottom edge rendering of
scaled buffers.
* Add support for translating the user visible strings in some
themes
* Prefix Title and Subtitle theme config keywords with an
underscore
* Add new reboot and system-upgrade modes
* main: Remove private ply_mode_t
* two-step: Make ProgressBarShowPercentComplete a per mode
setting
* plymouthd.defaults: Change default ShowDelay to 0
* ply-boot-splash: Do not add ply_boot_splash_update_progress
timeout multiple times
* logging: Minor log-message fixes.
Improve logging format.
* themes: Update spinner and bgrt theme offline updates mode
* two-step: Add a per mode setting to suppress messages.
Add progress-bar support.
Add MessageBelowAnimation option.
Add per mode settings.
Drop background_is_bgrt view_t member
* ply-progress-bar: Allow caller to specify the widgets width and
height.
Allow choosing fore- and back-ground color.
Redraw on percentage update.
* boot-server: fix type confusion when allocating connection object
* ply-device-manager: Handle change events for monitor hotplugging.
Consume all events in one go.
* drm: Stop limiting preferred-mode picking to UEFI systems.
Reset mode on display-port connected outputs with a bad
link-status.
Implement handle_change_event.
Ensure heads are mapped before flushing them.
Allow calling create_heads_for_active_connectors multiple
times.
Allow calling ply_renderer_head_add_connector with existing
connector_id.
Limit backend->resources lifetime to within query_device.
Store and keep all the outputs in the backend.
Add get_output_info helper function
Stop storing a pointer to drmModeConnector in ply_output_t
Stop keeing a drmModeConnector instance around.
Refactor ply_renderer_head_add_connector and
ply_renderer_head_new
- Rebase 0002-Install-label-ft-plugin-into-initrd-if-available.patch
- Update to version 0.9.4+git20181219.c8f1256:
* two-step: Use plymouth_strtod
Use the locale agnostic plymouth_strtod helper which always
uses a "." as decimal seperator. This fixes the various
Alignment options not working with some locales.
Wed Dec 12 08:48:56 UTC 2018 - qzhao@suse.com
- Update to version 0.9.4+git20181209.f7d5bb1:
* ply-keyboard: Fix compiler warning
* When a renderer goes away on a udev remove event, free
keyboards associated with the renderer, before freeing the
renderer.
* device-manager: free keyboards when deactivating a renderer
* keyboard: add helper to get the keyboard's renderer, if
applicable.
- Update to version 0.9.4+git20181204.0cd0613:
* drm: Pick a controller for unconfigured connectors
* drm: Drop crtcs for clones for which we've picked different
modes
* drm: More connector enumeration refactoring
* drm: Store tiled and rotation in ply_output_t
* drm: Refactor create_heads_for_active_connectors
* drm: Directly store the mode instead of the mode_index
* drm: Drop unused encoder_id
- Update to version 0.9.4+git20181129.a7ec3e6:
* Add new BGRT theme, using the firmware boot splash as background
* two-step: bgrt: Deal with quirky firmwares, Add ACPI BGRT
extension support, Speed up background-tile drawing on HiDPI
screens, Use a pixel-buffer instead of an image for the view's
background
* ply-pixel-buffer: Add ply_pixel_buffer_rotate_upright helper,
Add ply_pixel_buffer_get/set_device_rotation helpers, Fix marking
buffers as opaque when doing a solid fill, Fix fill_with_buffer
fastpath when device_scale != 1.
- Update to version 0.9.4+git20181122.aaa140b:
Add a separator between different boot logs
Fix race causing undesired creation of non-gfx devs
Fix animation not starting on later added heads
- Update to version 0.9.4+git20181111.118c5ca:
Modify systemd-units: Add "ConditionVirtualization=!container" in
all plymouth-*.service, also systemd-ask-password-plymouth.path.
- Update to version 0.9.4+git20181105.f898586:
bump to 0.9.4
- Update to version 0.9.3+git20181031.025ce59:
drm: use preferred mode for outputs
drm: Refactor ply_renderer_connector_get_rotation
drm: Reset LUT/gamma table before the first drmModeSetCrtc call
libply: Move kernel commandline parsing functions to libply/ply-utils
throbber: Don't skip last frame when waiting for end.
- Drop plymouth-throbber-Don-t-skip-last-frame-when-waiting-for-end.patch
* Upstream has already accept Michal's modification.
- plymouth-throbber-Don-t-skip-last-frame-when-waiting-for-end.patch
* Make sure plymouthd stops throbber animation at the first
opportunity after receiving quit command, instead of looping
multiple times. (boo#1110199)
- Update to version 0.9.3+git20180827.0a66272:
* boot-server: free the argument and triggers
* event-loop: fix leak in error path
* script: fix various memory leaks
* key-file: ply_key_file_get_value returns duplicated memory, fix
memory leaks.
* event-loop: fix leak in error path
* boot-splash: fix memory leak in error path
* populate-initrd: drop unused local variable
- Update to version 0.9.3+git20180827.0a66272:
ensure tty is closed on deactivate
If plymouth doesn't get explicitly "activated" then when
GDM tries to deactivate it, the deactivation request is
a noop.
One aspect of being active, though is having ownership and
control of the terminal. This happens immediately, even
before a splash is shown.
The `deactivate` request needs to relinguish such control,
unconditionally, since some display server is about to use
the tty.
- Update patch name base on quilt standerd
Remove only_use_fb_for_cirrus_bochs.patch
Add plymouth-only_use_fb_for_cirrus_bochs.patch
Remove 0001-Some-greenish-openSUSE-colors.patch
Add plymouth-some-greenish-openSUSE-colors.patch
- Update to version 0.9.3+git20180807.7663b0c:
* systemd-units: Add "ConditionVirtualization=!container"
* README: add link to Code of Conduct
* two-step: add unhandled splash mode case to switch
* main: fix build
* Fix miscellaneous compiler warnings
* configure: Pass -Wno-cast-function-type if available
* main: Fix getting detailed logs from systemd
* main: Show details when ESC is pressed during splash_delay
* drm: Remove unnecessary reset_scan_out_buffer_if_needed() call
from ply_renderer_head_map()
* main: Only activate renderers if the splash uses pixel-displays
- Switch to new gitlab home in _service.
- Refresh patches with quilt.
- Use autosetup macro.
- Drop plymouth-fix-window-size: The use of the smallest screen
size is deliberate (boo#804607 bsc#894051).
- Modify 0001-Add-label-ft-plugin.patch to fix problems with
multiline text (bsc#1083695)
* to prevent infinite loop newline characters need to be skipped
- Use %license instead of %doc (bsc#1082318)
- Update to version 0.9.3+git20171220.6e9e95d:
* device-manager: drop superfluous
create_pixel_displays_for_renderer call
* x11: don't call gdk_display_get_name before gtk_init
- Update to version 0.9.3+git20171130.fa66a5b:
* INSTALL: Fix a spelling error in the command example
* populate-initrd: handle themes with subdirs
* device-manager: fall back to text mode if graphical devices
fail
* scripts: Use >&2 instead of /dev/stderr
* terminal: add include for sysmacros.h
* configure: bump to 0.9.4
* terminal-session: don't delete boot.log
* Revert "Make boot.log world readable by default"
- Rebase 0002-Install-label-ft-plugin-into-initrd-if-available.patch
- Drop stop-graphical.patch: There are no conflicting these days,
obsolete this patch to enable auto switch to TTY when display
server not exist (boo#1066510).
- Update plymouth.spec: Add COPYING file in plymouth package file
list, This is for the law requirement (bsc#1043834).
- Update to version 0.9.2+git20170424.6fd5c6b:
* main: Look for config in runtime dir first
* main: Look for theme in runtime dir first
* Revert "Recreate boot log at each boot instead of appending"
* x11: implement get_display_name
* drm: implement get_display_name
* configure: don't look for libudev when --without-udev is passed
* renderer: export device name from plugin
* device-manager: handle NULL renderer better
- Remove 0001-device-manager-handle-NULL-renderer-better.patch
(upstreamed).
- Drop use-mkinitrd.patch: No longer needed, mkinitrd is just a
wrapper for dracut now any way, hence this patch is currently
pointless.
- Remove patch which causes breakage with systemd-vconsole-setup (bsc#1020327):
* 0001-let-it-become-a-real-daemon.patch
- Add upstream patch to fix crash on boot:
* 0001-device-manager-handle-NULL-renderer-better.patch
- Replace removal of framebuffer driver and plymouth-ignore-cirrusdrm.patch
with single patch:
* only_use_fb_for_cirrus_bochs.patch
- Update to version 0.9.2+git20161215.18dd755:
* terminal: refresh geometry after drm device arrives
* logger: stop using carriage returns
* build-goo: don't install systemd units during distcheck
* systemd-units: Fix uninstall script
* configure: switch to tar.xz instead tar.bz2
* libply: fix HiDPI detection
* libply, main: Add device scale setting
* main: support plymouth.force-scale on the kernel command line
* build-goo: make udev support build time optional
* device-manager: dont pass terminal as renderer device
- Update to version 0.9.2+git20160823.e4b7e49:
* libply: fix HiDPI detection
* libply, main: Add device scale setting
* main: support plymouth.force-scale on the kernel command line
- Refresh patch:
* 0001-let-it-become-a-real-daemon.patch
- Add systemd to buildrequires to properly detect systemd-ask-password
- Sort out with spec-cleaner and move all buildrequires to main scope
not to subpkgs, sometimes interpreted wrongly by rpm if it is split
- Reduce patches list removing merged upstream (bit differently tho):
* 0001-seats-guard-against-NULL-terminal.patch
* fix-serial-consoles.patch
* plymouth-boot-vga-framebuffer.patch
- Refresh patches:
* 0001-let-it-become-a-real-daemon.patch
- Update to version 0.9.2+git20160620.0e65b86:
* configure: tweak defaults to be more systemd friendly
* text: don't draw if not animating
* terminal: always open terminal in non-blocking mode
* device-manager: probe existing DRM devices at startup
* drm: don't pick up drm master implicitly
* terminal: refresh geometry after drm device arrives
* logger: stop using carriage returns
* build-goo: don't install systemd units during distcheck
* systemd-units: Fix uninstall script
* configure: switch to tar.xz instead tar.bz2
- Remove framebuffer support bsc#980750 and bsc#982226
- Add 0003-fix_null_deref.patch as well
- Avoid potential SEGV if label plugin fails to load
- Add 0001-Add-label-ft-plugin.patch and
0002-Install-label-ft-plugin-into-initrd-if-available.patch:
- Ability to output text in initrd, needed for encryption
- boo#959986
- Update to version 0.9.2:
+ two-step: Add separate startup / shutdown animations.
+ device-manager: try fb device if drm device failed.
+ Port to GTK+ 3.0.
+ script support system update events.
+ Drop the obsolete log-viewer
- Rebase patches:
+ plymouth-fix-window-size
+ stop-graphical.patch
+ 0001-Some-greenish-openSUSE-colors.patch
+ fix-serial-consoles.patch
+ 0001-seats-guard-against-NULL-terminal.patch
+ plymouth-ignore-cirrusdrm.patch
+ plymouth-boot-vga-framebuffer.patch
+ 0001-let-it-become-a-real-daemon.patch
- Drop upstream fixed patches:
+ 0001-device-manager-only-call-ply_terminal_free.patch
+ 0001-splash-remove-pixel_pixel-in-sprite-lib-when-notifie.patch
+ 0001-splash-do-not-process-display-lists-if-it-is-empty.patch
+ 0001-libply-splash-core-also-monitor-for-file-removal-in-.patch
+ 0001-seat-be-a-little-more-forgiving-in-the-case-there-s-.patch
+ 0001-text-step-bar-use-correct-utf-8-multibyte-sequence-f.patch
- Replace pkgconfig(gtk+-2.0) BuildRequires with
pkgconfig(gtk+-3.0), following upstreams port to GTK+ 3.0.
- Rename library subpackage from *2 to *4, followings upstreams
soname bump.
- Drop utils subpackage: the log-viewer, which was the only tool
left, has been dropped.
- Fix missing dependency on coreutils for initrd macros (boo#958562)
- Call missing initrd macro at postun (boo#958562)
- Use is_opensuse to simplify if/else block
- Add a direct dependency on systemd, since we need to know the
path to systemd-tty-ask-password-agent, fixes part of bsc#943312
- fix bashisms in post/postun scripts
- Update 0001-let-it-become-a-real-daemon.patch to call setsid
only from the child process.
- Add 0001-let-it-become-a-real-daemon.patch to make plymouth
a real daemon, fixes part of bnc#889757. Patch by Werner.
- Add plymouth-boot-vga-framebuffer.patch to fix boot_vga
problem with framebuffer devices. (bnc#886211)
- Modify plymouth-ignore-cirrusdrm.patch to return as
early as possible. Patch by glin@suse.com
- Invert the logic in plymouth-ignore-cirrusdrm.patch bnc#890516
- Add
0001-text-step-bar-use-correct-utf-8-multibyte-sequence-f.patch:
fix incorrect UTF-8 code used for square (bnc#886148).
- Add plymouth-ignore-cirrusdrm.patch: ignore cirrus drm and use fb
instead (bnc#888590)
- Add
0001-seat-be-a-little-more-forgiving-in-the-case-there-s-.patch:
Be more forgiving with empty seat.
- Update 0001-Some-greenish-openSUSE-colors.patch to also use SUSE
colors on tribar (bnc#886148)
- Add
0001-libply-splash-core-also-monitor-for-file-removal-in-.patch:
handle new udev behaviour in seqnum removal.
- Add
0001-splash-do-not-process-display-lists-if-it-is-empty.patch:
fix crash when calling plymouth quit
- Add 0001-seats-guard-against-NULL-terminal.patch: guard against
NULL terminal.
- Update stop-graphical.patch: add RemainAfterExit=true to
plymouth-start.service, ensuring plymouthd is not restarted when
switching between runlevels.
- Add
0001-splash-remove-pixel_pixel-in-sprite-lib-when-notifie.patch:
fix crash when pixel_display is removed.
- Add 0001-device-manager-only-call-ply_terminal_free.patch: fix
crash.
- Add use-mkinitrd.patch: call mkinitrd -B, not dracut for now,
otherwise initramfs is being created by plymouth-update-initrd,
not initrd file.
- Ensure we don't rebuild initrd twice when updating plymouth.
- Ensure default theme is SLE/openSUSE (based on %suse_version)
- Release 0.9.0 (3 additional fixes compared to previously packaged
git snapshot):
+ Use udev for graphics device enumeration
+ Add new text plugin to replace the tribar one
+ Add background tiling and watermark support to two-step
+ Make various plymouth commands that change state be resilient
to being called multiple times
+ Support going back to the initrd at shutdown
+ Keyfile parser improvements
+ Make plymouthd use better defaults when running on top of X11
+ Fixes for systems using QXL
+ minor two-step plugin fixes
+ Use /sys/class/tty/console/active instead of parsing
/proc/cmdline for consoles.
+ Documentation improvements
+ Drop driver specific renderers and use generic driver across the
board.
+ Better debug message output
+ systemd integration fixes
+ upstart integration fixes
+ initrd scripts fixes
+ Misc fixes
- Update fix-serial-consoles.patch to fix a crash in some rare
cases.
- Add fix-serial-consoles.patch to fix binary garbage on serial
consoles. This is bnc#873859
- Remove plymouth-restore-suspend.patch: suspend package is being
dropped, no longer needs to provide this old API.
- Remove requires on suspend package.
- Update to git snapshot as of 20140327
* Fixes bnc#872502 and bnc#872428
- Kill all mkinitrd stuff
Remove suse-initrd-support
- Tell zypper to regenerate initrd on installation/update via %post and
%posttrans scripts
- Add plymouth-manpages.patch to fix manpage installation (bnc#871419)
- Drop plymouth.conf, it is no longer used, plymouthd.conf is
nowadays.
- Updated from git
- carried over patches
- Dropped 0001-Make-plymouthd-real-daemon-and-save-old-log.patch
Because it is really not necesary
- Add patch
0001-Make-plymouthd-real-daemon-and-save-old-log.patch
all daemons should call setsid(2) to become a real daemons without
controlling terminal. Beside this the old boot log will help for
debugging and for support.
- Add powerpc64le-linux support.
- disable plymouth in initrd if the root volume is encrypted. This
is a workaround until plymouth is able to handle the prompt
correctly (bnc#834063).
- version 0.8.8_git201309032142
- All device specific code has been removed because the kernel
has been fixed in the meanwhile so plymouth no longer requires
libdrm_intel, libdrm_radeon, libdrm_nouveau and can use the generic
interface.
This commit does not add any new features or bugfixes but removes
a huge chunk of unnecessary code.
- Pre require plymouth from plymouth-scripts; (bnc#806388).
- Update to version 0.8.8_git201308011340
- Drop patch plymouth-correct-systemd-prefix.patch
- Drop patch plymouth-close.patch
- Drop patch plymouth-close-unredirect.patch
- Drop patch plymouth-redirect-null.patch
- Drop patch plymouth-exit-code.patch
- Drop patch plymouth-terminal-session-close.patch
- Add upstream patch plymouth-correct-systemd-prefix.patch to
correct the systemd prefixes in some systemd files. This replaces
the sed string.
- Require pigz instead of gzip
- ensure plugin requires are versioned.
- own %{_localstatedir}/log/boot.log
and %{_localstatedir}/spool/plymouth/boot.log (as %ghost s)
- Add plymouth-close: do not try to close negative fd.
- Add plymouth-close-unredirect.patch: do not leak fd when stopping
redirection of /dev/console (bnc#811185)
- Add plymouth-redirect-null.patch: redirect plymouth standard io
to /dev/null (bnc#811185)
- Add plymouth-exit-code.patch: ignore exit code in ExecStartPost.
- Add plymouth-terminal-session-close.patch: do no try to close
terminal session fd if already closed.
- Not only reboot.service is prefixed with systemd- currently
but also kexec,halt,poweroff.
- Also ensure we express rpm dependencies correctly
this package is not gonna work on systemd < 186.
- Update to version 0.8.8_git201304161248
- drop plymouth-change-service-name.patch, replaced by
a sed script that will account for all service files' future changes
- drop patch plymouth-trace-lines, in upstream now
- drop plymouth-udevadm-path.patch, generic solution in upstream now.
- drop ply-sdunitdir.patch likewise.
- drop plymouth-systemd-in-usr.patch likewise.
- drop systemd-no-warning.patch, not needed with newer systemd
- drop plymouth-sd-notforking.patch , not really needed anymore.
- Changed %post scripts so only the rebuild of the initrd is
omitted within the build environment
- Added patch plymouth-correct-runtime-dir.patch to make the
plymouthruntimedir equal to /run/plymouth and not /var/run/plymouth
- Rename plymouth-sd-notforking.patch to fix typo in patch name
- Add plymouth-change-service-name.patch: fix incorrect service
names used for dependencies. Now use systemd-reboot.service
(replacing reboot.service) and display-manager.service (replacing
prefdm.service).
- Make sure that the right version of the scripts is required by
the main package. This to prevent that an update of the scripts
is not installed (bnc#793400)
- Removed obsolete patch plymouth-remove-pid-file.patch. Issue
has been resolved upstream
- fix path to systemd-tty-ask-password-agent for newer systemd
- create the pid file again during boot, the existence of this is
a condition for systemd-ask-password-plymouth.service. A proper
fix might look different but that get's it going again.
- Provide the scripts to integrate Plymouth in dracut as a
separate package.
- Added patch (plymouth-dracut-path.patch) to correct the paths
inside the specific plymouth-dracut scripts
- Update to an slightly newer git snapshot to fix regression
from 0.8.8
- Version 0.8.8
* main: Try to own socket before anything else
* main: silently succeed if plymouthd is started a second time
* service: start plymouthd unconditionally
* x11: make window fullscreen by default
* x11: only create windows when necessary
- plymoith-sd-notforking.patch: Make plymouthd to not use
Service type "forking"
- ply-sdunitdir.patch: Must install units in %{_unitdir} as
returned by pkg-config not in a hardcoded location.
- Remove the non required font file in /etc/fonts/conf.avail/ .
- Adjusted the upstream patch to remove the pid file. The original
one seems to cause issues with the DM killing plymouth
- Fix the Pango installation within the initrd. This would
resolve the error message that Pango cannot find any fonts
- fix the libdir path in plymouth-set-default-theme (bnc#780085)
- Update to version 0.8.7
+ fix plymouth race at bootup breaking efi/vesa handoff
+ Systemd fixes
- Add plymouth-remove-pid-file.patch: remove PID file usage
(bnc#780976) (Thanks to fcrozat)
- Remove upstream patches: plymouth-systemd-target.patch,
0001-ply-text-progress-bar-strip-quotes-if-present,patch,
plymouth-fix-systemd-service.patch, plymouth-after-udev-settle
due to upstream inclusion.
- Add plymouth-after-udev-settle.patch: ensure plymouth is started
after udev triggers has been started (git + name change due to
systemd < 183 in openSUSE 12.2).
- Ensure that the right Pango version is used for copying one of
the pango modules
- Add plymouth-fix-systemd-service.patch: remove dashes next to
semi-colons, it confuses systemd. (bnc#774400)
- Update suse-initrd-support to not start plymouth if kernel
cmdline contains "shell" or "plymouth.enable=0" or
"rd.plymouth=0".
- remove suspend dependency on ARM
- Ship /etc/os-release in the initrd so that the pretty name is
displayed in text-splash mode
- Give the text-splash some SUSE-typical green coloring
- fix build for ARM
- Move the openSUSE branding to its rightful place
- Update to 0.8.6.1:
+ Fix systemd path file generation
- Changes from 0.8.6:
+ fix flush_area fast-path
+ seed random number generator by default for script plugins
+ allow plymouth to be built without gtk dependency
+ cope with lack of /etc/os-release better
+ pull in systemd unit files (bnc#770890)
+ add support for new "updates" mode for doing package updates
(only available for some plugins at the moment)
- Add plymouth-restore-suspend.patch: revert commit removing
suspend/resume support, needed for suspend package.
- Add plymouth-systemd-target.patch: add missing symlinks to start
plymouth on shutdown / reboot / kexec (bnc#770764).
- Add plymouth-udevadm-path.patch: adapt to udevadm path on
openSUSE.
- Ensure systemctl daemon-reload is called in post / postun
- Add systemd-no-warning.patch: remove Documentation tag not
handled by systemd v44.
- Update stop-graphical.patch to correct prevent plymouth.quit to
start under runlevel 5 (handled by xdm initscript directly).
- don't require intel_drm on ppc
- run "/sbin/mkinitrd" and let it figure out by itself
what initrds to update. bnc#769812
- Provides systemd units, instead of relying on systemd to ship
them (bnc#769397).
- Ensure plymouth--wait-quit.service conflicts with
graphical.target.
- Update to 0.8.5.1
+ two-step splash plugin quit fixes
+ add generic driver to drm renderer plugin
This allows new modesetting drivers to work with plymouth
automatically
+ fixes for video cards that don't support 32bpp
+ add alignment and width features to label controls
+ new documentation
+ event loop fix
+ more serial console fixes
+ better systemd integration
+ new flush api to client library
+ Allow plymouth to build the drm renderer without the driver
dependent libdrm_* libraries.
- disable plymouth if init is not systemd (could be e.g. /bin/sh or
sysvinit then)
- if we provide bootsplash, we should also make sure to obsolete
its version
- Ensure that the openSUSE theme is default. (bnc#765277)
- Remove unnecessary changes to the kernel options. Plymouth also
accepts splash=silent.
- Add plymouth-scripts Requires(post) to branding-openSUSE
subpackage, to make sure that the %post scriptlet will work.
- Make sure we export LIB and not lib in the %postun scriptlets of
theme-solar and branding-openSUSE subpackages.
- Ensure that label.so is being installed for the openSUSE branding
(bnc#763574)
- Update the installation/update from plymouth in a way that the
initrd file for the current running kernel is updated.
- Corrected a typo with regards to the location of a pango module
when setting up the initrd.
- Added a patch for openSUSE to enable the rebuild of the initrd
with the plymouth-set-default-theme script. (bnc#757284)
- Added plymouth to the requires of plymouth-scripts. This
should resolve bug (bnc#757284)
- Split x11 renderer into his own package; the x11 renderer allows
users to test plymouth themes; having it available on the devel
package will force people who just want to test a theme to
install a lot of unwanted dependencies. Being on it's own package
without explicit dependencies provides extra functionality to
users who want to test themes without having to rebuild initrd
and rebooting for testing.
- bnc#761403
- Reduce the number of fonts that are included in the initrd. Also
let mkinitrd sort out the dependencies for the required libs.
- Use the same font as that grub2 is currently using for it's
graphics mode.
- Correct the theme name in the post install script of
plymouth-branding-openSUSE
- Updated the initrd patch to include the necessary files to have
text support (e.g. LUKS passphrase question, etc)
- Temporarily added a openSUSE plymouth theme
(plymouth-branding-openSUSE) to have a better integration with
12.2.
- Ensure that both grub and grub2 are adjusted with regards to the
splash parameter. Running grub2-mkconfig to have the right
configuration.
- Installation of themes are not causing any reset of the selected
default theme anymore. Now this only happens when a theme is
installed and the default theme is set to TEXT.
- Update to the official release of 0.8.4
* Bugfix: Use /dev/fb0 instead of /dev/fb, this resolves the
issue of not showing the splash during shutdown
- Add a small change in order to have plymouth activated with Grub2
- Make sure that the package libply-boot-client is always
installed to prevent a system that will not boot
- Replaced package core-libs with individual packages for each shared
library (SLPP)
- Proper provides/obsoletes pair for bootsplash
- Could not resist to run spec-cleaner ;-)
- Changed the parameters to plymouthd in the initrd to create
the necessary pid-file for the systemd integration
- Ensure that /bin/plymouth still is available as that the
displaymanagers (KDM/GDM) are expecting this. This needs to be
in place until the migration to /usr is completed.
- Finalize the Plymouth integration on openSUSE.
* Current default theme is Solar with the openSUSE Geecko
* Plymouth bootsplash will run on tty7 during boot.
* Install all files in /usr
- Update to current git
- Update to git snapshot from 12 Mar 2011.
- Mostly minor fixes.
- Updated to latest snapshot.
- boot-server: improve debug output
- pixel-buffer: Fix overflow in blend_two_pixel_values
- boot-server: fix debug output when message is from init
- Fixed an issue with the script plugin's Window attributes returning
the size of the smallest display when multiple displays are used.
- Fixed location of text.so and details.so in plymouth-scripts
- fix the build failure:
- own additional directories
- fix rpmlint failures:
- fix up package groups - those are just guessed sometimes
- rename plymouth-graphics-libs to libply-splash-graphics2
(this one was fatal)
- do not own /var/run/plymouth - probably still needs fixing
(this was almost fatal)
- do not include build date in binary, use mtime of source
patchfile instead
- Initial packaging.
OBS-URL: https://build.opensuse.org/request/show/889522
OBS-URL: https://build.opensuse.org/package/show/Base:System/plymouth?expand=0&rev=299
2021-04-30 12:34:53 +02:00
Sat Feb 20 08:37:12 UTC 2021 - Cliff Zhao <qzhao@suse.com>
- Disable plymouth-systemd-KillMode-mixed.patch: Temporary disable
it, because aarch64 and ppc64le system could not booting in
release period, and this is only a enhancement with no harm to
rollback (bnc#1177082, bnc#1182145, bnc#1184087).
-------------------------------------------------------------------
2021-02-15 16:37:24 +01:00
Sat Feb 13 14:25:36 UTC 2021 - Arjen de Korte <suse+build@de-korte.org>
- Fix broken use of %service_add_post and %service_del_postun. Without
any services specified, the first is a no-op, the latter will only
execute systemctl daemon-reload (boo#1179849).
- Use %ldconfig_scriptlets macro in Tumbleweed
2021-02-01 16:45:37 +01:00
-------------------------------------------------------------------
Mon Feb 1 15:18:48 UTC 2021 - Cliff Zhao <qzhao@suse.com>
- Disable plymouth-ignore-serial-console.patch:
We could not totally disable serial, because S390 and some customer
2021-02-01 17:26:36 +01:00
are still rely on it (bnc#1180973, bnc#1181216).
2021-02-01 16:45:37 +01:00
2020-12-08 05:03:12 +01:00
-------------------------------------------------------------------
Tue Dec 8 03:46:39 UTC 2020 - Cliff Zhao <qzhao@suse.com>
- Update to version: 0.9.5+git20201026:
Don't wait forever for a ping reply.
2020-11-27 09:24:41 +01:00
-------------------------------------------------------------------
2020-12-07 03:42:16 +01:00
Sat Nov 21 14:26:51 UTC 2020 - Cliff Zhao <qzhao@suse.com>
2020-11-27 09:24:41 +01:00
- Add plymouth-disable-fedora-logo.patch:
Disable the image link which point to the fedora logo. this
modification will also avoid the failure report from build
checker.
2020-10-29 12:21:00 +01:00
-------------------------------------------------------------------
Thu Oct 27 06:38:44 UTC 2020 - Cliff Zhao <qzhao@suse.com>
- Add plymouth-ignore-serial-console.patch:
Don't output in serial console for openQA need to take serial in
the test, and yast-installation prgram has a feature to install
system through it (bnc#1051692 bnc#1164123 bnc#1170906).
2020-11-21 10:59:37 +01:00
-------------------------------------------------------------------
Fri Oct 16 10:16:39 UTC 2020 - Ludwig Nussel <lnussel@suse.de>
2020-11-27 09:24:41 +01:00
- Update plymouth.spec: prepare usrmerge (boo#1029961)
2020-11-21 10:59:37 +01:00
2020-10-07 17:12:36 +02:00
-------------------------------------------------------------------
Wed Oct 7 14:53:06 UTC 2020 - Cliff Zhao <qzhao@suse.com>
- Update to version: 0.9.5+git20200921+20778f2:
2020-10-07 17:37:05 +02:00
* boot-server: Handle client disconnecting while trigger pending.
* boot-server: Ref count the connections.
* drm: Honor modes selected by the user through video= kernel
cmdline argument.
* use resolution of higher res monitor for window size.
* autogoo: use /proc/self/fd/0 instead of /dev/stdin.
* main: Don't bail out of load_settings if "Theme" is missing.
* main: switch log file when switching mode.
* main: fix mode changing before splash is shown.
* two-step: Center message text within labels if labels are
centered.
* drm/kms probe speedups.
* drm: Do not unnecessarily get output info twice.
* ply-device-manager: Only consume one udev event at a time.
* two-step: Do not jump to end-animation on halt/reboot if it is
disabled.
* two-step: Add UseEndAnimation setting.
* script: add Image.Crop(x, y, width, height).
* ply-throbber: Do not redraw when we need to stop throbbing on
free.
* ply-keymap-icon: Do not draw on free.
* ply-capslock-icon: Do not draw on free.
* script: add missing unref() for system update func.
* themes: Drop UseFirmwareBackground=true from spinner/bgrt
firmware-upgrade settings.
* Fix SetSystemUpdateFunction.
* event-loop: Remove ply_trace calls around the disconnect handler.
* ply-terminal-session: Not use grantpt when the system shut down.
to avoid sytem hung up.
* build-goo: Remove vestigial remnants of old GDM integration code.
- Drop plymouth-avoid-umount-hanging-shutdown.patch: because has
been merged to upstream.
2020-10-07 17:12:36 +02:00
2020-09-29 03:01:40 +02:00
-------------------------------------------------------------------
Mon Sep 28 16:32:43 UTC 2020 - Stefan Brüns <stefan.bruens@rwth-aachen.de>
- Remove gnu-unifont-bitmap-fonts runtime dependency, it is not
used anywhere.
- Remove unused kernel-headers and module-init-tools build deps.
- Make plymouth-scripts noarch, correct its runtime dependencies.
- Clean up spec file.
2020-08-30 09:03:35 +02:00
-------------------------------------------------------------------
Sat Aug 29 06:13:50 UTC 2020 - Cliff Zhao <qzhao@suse.com>
- Add plymouth-no-longer-modify-conf-to-drop-isopensuse-macro.patch:
plymouth will use plymouthd.defaults instead of plymouth.conf and
packge plymouthd.defaults in a seperet RPM. this can avoid change
SUSE or openSUSE branding section with is_opensuse macro in the
config file. means this modification can close the leaps gap
2020-09-03 03:29:48 +02:00
(jsc#SLE-11637).
2020-08-30 09:03:35 +02:00
2020-09-07 11:08:38 +02:00
-------------------------------------------------------------------
Sat Aug 28 16:11:25 UTC 2020 - Cliff Zhao <qzhao@suse.com>
- Update plymouth.spec: Dropping gdm transition because it has
alreay deprecated by upstream. Removing git build dependency.
2020-05-05 18:33:42 +02:00
-------------------------------------------------------------------
2020-06-15 17:16:28 +02:00
Mon Jun 15 13:54:25 UTC 2020 - Cliff Zhao <qzhao@suse.com>
2020-05-05 18:33:42 +02:00
2020-08-29 07:13:18 +02:00
- Drop plymouth-only_use_fb_for_cirrus_bochs.patch: openSUSE user
are using emu-5.0.0 on MacOS-X with HVF acceleration, the
Plymouth theme with script module fails to go to graphic mode
2020-06-15 17:16:28 +02:00
with this patch(boo#1172028).
2020-05-05 18:33:42 +02:00
2019-12-13 02:11:30 +01:00
-------------------------------------------------------------------
Wed Oct 30 19:21:08 UTC 2019 - Stefan Brüns <stefan.bruens@rwth-aachen.de>
- Avoid inconsistencies in library package names causing unresolvable
dependencies, replace all soversion occurences with a macro.
2019-09-11 10:41:16 +02:00
-------------------------------------------------------------------
Wed Sep 11 07:54:48 UTC 2019 - Cliff Zhao <qzhao@suse.com>
- Add patch plymouth-avoid-umount-hanging-shutdown.patch:
To avoid grantpt() call nsslookup, it will hanging system unmount
2020-11-12 18:01:03 +01:00
/var during shutdown period(bnc#1105688, bnc#1129386,
bnc#1134660, bnc#1166601, bnc#1171971).
2019-09-11 10:41:16 +02:00
2019-09-03 16:08:56 +02:00
-------------------------------------------------------------------
Thu Aug 15 03:56:10 UTC 2019 - Cliff Zhao <qzhao@suse.com>
2019-09-11 10:41:16 +02:00
- Update to version 0.9.5+git20190908+3abfab2:
2019-09-03 16:08:56 +02:00
* two-step: Deal with buggy firmware which does not pre-rotate the bgrt image
* configure: bump so name
* Internationalization: Add zh_HK and zh_TW translations.
2019-09-11 10:41:16 +02:00
* add delay time to 8 seconds to fit AMD graphic card.
2019-09-03 16:08:56 +02:00
2019-08-05 08:14:40 +02:00
-------------------------------------------------------------------
Mon Aug 5 05:58:21 UTC 2019 - Cliff Zhao <qzhao@suse.com>
- Update plymouth.spec: Disable upstart-monitor compile because it
only used in Ubuntu/Debian.
2019-08-05 05:35:40 +02:00
-------------------------------------------------------------------
Sun Aug 4 03:51:50 UTC 2019 - Stefan Brüns <stefan.bruens@rwth-aachen.de>
2019-08-05 08:14:40 +02:00
- Update plymouth.spec: Use bcond_with for X11 renderer, cleanup
syntax.
2019-08-05 05:35:40 +02:00
2019-07-31 13:52:42 +02:00
-------------------------------------------------------------------
Wed Jul 31 11:36:57 UTC 2019 - Cliff Zhao <qzhao@suse.com>
- Update plymouth.spec: obsolete plymouth render plugin for
Xwindows, Since this plugin will not be used in the production
environment, and this modify will highly decrease the compilation
of build requirements.
2019-06-14 11:40:15 +02:00
-------------------------------------------------------------------
2019-07-08 12:32:47 +02:00
Mon Jul 8 06:48:38 UTC 2019 - Cliff Zhao <qzhao@suse.com>
- Update to version 0.9.4+git20190612+9359382:
* two-step: Add support for firmware-splashes with rotation
status bits set
* Regenerate plymouth.pot to add the strings for the new
firmware-upgrade mode.
-------------------------------------------------------------------
2019-06-14 11:40:15 +02:00
Fri Jun 14 07:06:46 UTC 2019 - Cliff Zhao <qzhao@suse.com>
- Add dependency to dracut for plymouth-scripts(bnc#1138248).
2019-06-27 05:37:23 +02:00
-------------------------------------------------------------------
Tue Jun 11 12:53:00 UTC 2019 - Dominique Leuenberger <dimstar@opensuse.org>
- BuildRequire pkgconfig(systemd) instead of systemd: allow OBS to
shortcut the build queues by allowing usage of systemd-mini
2019-04-08 20:44:12 +02:00
-------------------------------------------------------------------
Tue Apr 2 21:32:05 UTC 2019 - Stasiek Michalski <hellcp@mailbox.org>
- Change default openSUSE theme to bgrt
2019-03-27 09:53:46 +01:00
-------------------------------------------------------------------
Wed Mar 27 08:48:49 UTC 2019 - Cliff Zhao <qzhao@suse.com>
- Update to version 0.9.4+git20190325+b9f2aac:
* themes: Update spinner and bgrt background settings
* Translations: Sync translations with zanata
2019-03-25 04:08:28 +01:00
-------------------------------------------------------------------
Sun Mar 24 17:04:57 UTC 2019 - Stasiek Michalski <hellcp@mailbox.org>
- Fix theme-bgrt dependencies
(based on plugin-two-step with images from theme-spinner)
2019-03-12 14:03:43 +01:00
-------------------------------------------------------------------
Tue Mar 12 12:33:54 UTC 2019 - qzhao@suse.com
- Update to version 0.9.4+git20181219.c8f1256:
* ply-pixel-buffer: Fix right and bottom edge rendering of
scaled buffers.
* Add support for translating the user visible strings in some
themes
* Prefix Title and Subtitle theme config keywords with an
underscore
* Add new reboot and system-upgrade modes
* main: Remove private ply_mode_t
* two-step: Make ProgressBarShowPercentComplete a per mode
setting
* plymouthd.defaults: Change default ShowDelay to 0
* ply-boot-splash: Do not add ply_boot_splash_update_progress
timeout multiple times
* logging: Minor log-message fixes.
Improve logging format.
* themes: Update spinner and bgrt theme offline updates mode
* two-step: Add a per mode setting to suppress messages.
Add progress-bar support.
Add MessageBelowAnimation option.
Add per mode settings.
Drop background_is_bgrt view_t member
* ply-progress-bar: Allow caller to specify the widgets width and
height.
Allow choosing fore- and back-ground color.
Redraw on percentage update.
* boot-server: fix type confusion when allocating connection object
* ply-device-manager: Handle change events for monitor hotplugging.
Consume all events in one go.
* drm: Stop limiting preferred-mode picking to UEFI systems.
Reset mode on display-port connected outputs with a bad
link-status.
Implement handle_change_event.
Ensure heads are mapped before flushing them.
Allow calling create_heads_for_active_connectors multiple
times.
Allow calling ply_renderer_head_add_connector with existing
connector_id.
Limit backend->resources lifetime to within query_device.
Store and keep all the outputs in the backend.
Add get_output_info helper function
Stop storing a pointer to drmModeConnector in ply_output_t
Stop keeing a drmModeConnector instance around.
Refactor ply_renderer_head_add_connector and
ply_renderer_head_new
- Rebase 0002-Install-label-ft-plugin-into-initrd-if-available.patch
2019-01-02 11:31:58 +01:00
-------------------------------------------------------------------
Wed Jan 2 08:09:46 UTC 2019 - qzhao@suse.com
- Update to version 0.9.4+git20181219.c8f1256:
* two-step: Use plymouth_strtod
Use the locale agnostic plymouth_strtod helper which always
uses a "." as decimal seperator. This fixes the various
Alignment options not working with some locales.
2018-12-12 07:37:14 +01:00
-------------------------------------------------------------------
Wed Dec 12 08:48:56 UTC 2018 - qzhao@suse.com
- Update to version 0.9.4+git20181209.f7d5bb1:
* ply-keyboard: Fix compiler warning
* When a renderer goes away on a udev remove event, free
keyboards associated with the renderer, before freeing the
renderer.
* device-manager: free keyboards when deactivating a renderer
* keyboard: add helper to get the keyboard's renderer, if
applicable.
2018-12-05 10:09:43 +01:00
-------------------------------------------------------------------
Wed Dec 5 06:59:56 UTC 2018 - qzhao@suse.com
- Update to version 0.9.4+git20181204.0cd0613:
* drm: Pick a controller for unconfigured connectors
* drm: Drop crtcs for clones for which we've picked different
modes
* drm: More connector enumeration refactoring
* drm: Store tiled and rotation in ply_output_t
* drm: Refactor create_heads_for_active_connectors
* drm: Directly store the mode instead of the mode_index
* drm: Drop unused encoder_id
2018-11-29 11:22:31 +01:00
-------------------------------------------------------------------
Thu Nov 29 07:54:27 UTC 2018 - qzhao@suse.com
- Update to version 0.9.4+git20181129.a7ec3e6:
* Add new BGRT theme, using the firmware boot splash as background
* two-step: bgrt: Deal with quirky firmwares, Add ACPI BGRT
extension support, Speed up background-tile drawing on HiDPI
screens, Use a pixel-buffer instead of an image for the view's
background
* ply-pixel-buffer: Add ply_pixel_buffer_rotate_upright helper,
Add ply_pixel_buffer_get/set_device_rotation helpers, Fix marking
buffers as opaque when doing a solid fill, Fix fill_with_buffer
fastpath when device_scale != 1.
2018-11-23 13:17:57 +01:00
-------------------------------------------------------------------
Fri Nov 23 10:09:29 UTC 2018 - qzhao@suse.com
- Update to version 0.9.4+git20181122.aaa140b:
Add a separator between different boot logs
Fix race causing undesired creation of non-gfx devs
Fix animation not starting on later added heads
2018-11-12 12:09:15 +01:00
-------------------------------------------------------------------
Mon Nov 12 10:47:54 UTC 2018 - qzhao@suse.com
2018-11-23 13:17:57 +01:00
- Update to version 0.9.4+git20181111.118c5ca:
2018-11-13 13:55:25 +01:00
Modify systemd-units: Add "ConditionVirtualization=!container" in
all plymouth-*.service, also systemd-ask-password-plymouth.path.
2018-11-12 12:09:15 +01:00
2018-11-06 09:30:05 +01:00
-------------------------------------------------------------------
Tue Nov 6 08:19:01 UTC 2018 - qzhao@suse.com
2018-11-23 13:17:57 +01:00
- Update to version 0.9.4+git20181105.f898586:
2018-11-06 09:30:05 +01:00
bump to 0.9.4
2018-11-01 10:05:31 +01:00
-------------------------------------------------------------------
Tue Oct 31 15:30:48 UTC 2018 - qzhao@suse.com
- Update to version 0.9.3+git20181031.025ce59:
drm: use preferred mode for outputs
drm: Refactor ply_renderer_connector_get_rotation
drm: Reset LUT/gamma table before the first drmModeSetCrtc call
libply: Move kernel commandline parsing functions to libply/ply-utils
throbber: Don't skip last frame when waiting for end.
- Drop plymouth-throbber-Don-t-skip-last-frame-when-waiting-for-end.patch
* Upstream has already accept Michal's modification.
2018-10-29 09:53:55 +01:00
-------------------------------------------------------------------
Tue Oct 23 07:15:48 UTC 2018 - msrb@suse.com
- plymouth-throbber-Don-t-skip-last-frame-when-waiting-for-end.patch
* Make sure plymouthd stops throbber animation at the first
opportunity after receiving quit command, instead of looping
multiple times. (boo#1110199)
2018-10-18 14:08:45 +02:00
-------------------------------------------------------------------
Thu Oct 18 11:57:15 UTC 2018 - qzhao@suse.com
- Update to version 0.9.3+git20180827.0a66272:
* boot-server: free the argument and triggers
* event-loop: fix leak in error path
* script: fix various memory leaks
* key-file: ply_key_file_get_value returns duplicated memory, fix
memory leaks.
* event-loop: fix leak in error path
* boot-splash: fix memory leak in error path
* populate-initrd: drop unused local variable
2018-08-29 04:39:53 +02:00
-------------------------------------------------------------------
Tue Aug 28 07:32:03 UTC 2018 - qzhao@suse.com
- Update to version 0.9.3+git20180827.0a66272:
ensure tty is closed on deactivate
If plymouth doesn't get explicitly "activated" then when
GDM tries to deactivate it, the deactivation request is
a noop.
One aspect of being active, though is having ownership and
control of the terminal. This happens immediately, even
before a splash is shown.
The `deactivate` request needs to relinguish such control,
unconditionally, since some display server is about to use
the tty.
2018-08-30 05:59:08 +02:00
- Update patch name base on quilt standerd
Remove only_use_fb_for_cirrus_bochs.patch
Add plymouth-only_use_fb_for_cirrus_bochs.patch
Remove 0001-Some-greenish-openSUSE-colors.patch
Add plymouth-some-greenish-openSUSE-colors.patch
2018-08-29 04:39:53 +02:00
2018-08-18 16:07:40 +02:00
-------------------------------------------------------------------
Fri Aug 17 17:36:09 UTC 2018 - bjorn.lie@gmail.com
- Update to version 0.9.3+git20180807.7663b0c:
* systemd-units: Add "ConditionVirtualization=!container"
* README: add link to Code of Conduct
* two-step: add unhandled splash mode case to switch
* main: fix build
* Fix miscellaneous compiler warnings
* configure: Pass -Wno-cast-function-type if available
* main: Fix getting detailed logs from systemd
* main: Show details when ESC is pressed during splash_delay
* drm: Remove unnecessary reset_scan_out_buffer_if_needed() call
from ply_renderer_head_map()
* main: Only activate renderers if the splash uses pixel-displays
- Switch to new gitlab home in _service.
- Refresh patches with quilt.
- Use autosetup macro.
2018-08-04 09:53:38 +02:00
-------------------------------------------------------------------
Sat Aug 4 06:15:14 UTC 2018 - qzhao@suse.com
- Drop plymouth-fix-window-size: The use of the smallest screen
size is deliberate (boo#804607 bsc#894051).
2018-04-12 12:08:25 +02:00
-------------------------------------------------------------------
Wed Apr 11 12:44:36 UTC 2018 - oholecek@suse.com
- Modify 0001-Add-label-ft-plugin.patch to fix problems with
multiline text (bsc#1083695)
* to prevent infinite loop newline characters need to be skipped
2018-08-03 09:09:27 +02:00
- Use %license instead of %doc (bsc#1082318)
2018-04-12 12:08:25 +02:00
2018-01-22 09:04:33 +01:00
-------------------------------------------------------------------
Sat Jan 13 21:20:16 UTC 2018 - zaitor@opensuse.org
- Update to version 0.9.3+git20171220.6e9e95d:
* device-manager: drop superfluous
create_pixel_displays_for_renderer call
* x11: don't call gdk_display_get_name before gtk_init
2017-12-19 17:40:22 +01:00
-------------------------------------------------------------------
Mon Dec 04 11:23:27 UTC 2017 - zaitor@opensuse.org
- Update to version 0.9.3+git20171130.fa66a5b:
* INSTALL: Fix a spelling error in the command example
* populate-initrd: handle themes with subdirs
* device-manager: fall back to text mode if graphical devices
fail
* scripts: Use >&2 instead of /dev/stderr
* terminal: add include for sysmacros.h
* configure: bump to 0.9.4
* terminal-session: don't delete boot.log
* Revert "Make boot.log world readable by default"
- Rebase 0002-Install-label-ft-plugin-into-initrd-if-available.patch
2017-06-15 11:46:41 +02:00
-------------------------------------------------------------------
2017-11-29 11:57:58 +01:00
Wed Nov 29 07:59:40 UTC 2017 - qzhao@suse.com
- Drop stop-graphical.patch: There are no conflicting these days,
obsolete this patch to enable auto switch to TTY when display
server not exist (boo#1066510).
-------------------------------------------------------------------
2017-06-15 11:46:41 +02:00
Wed Jun 14 06:16:48 UTC 2017 - qzhao@suse.com
- Update plymouth.spec: Add COPYING file in plymouth package file
list, This is for the law requirement (bsc#1043834).
2017-06-07 09:05:34 +02:00
-------------------------------------------------------------------
Mon May 8 15:20:02 UTC 2017 - antoine.belvire@opensuse.org
- Update to version 0.9.2+git20170424.6fd5c6b:
* main: Look for config in runtime dir first
* main: Look for theme in runtime dir first
* Revert "Recreate boot log at each boot instead of appending"
* x11: implement get_display_name
* drm: implement get_display_name
* configure: don't look for libudev when --without-udev is passed
* renderer: export device name from plugin
* device-manager: handle NULL renderer better
- Remove 0001-device-manager-handle-NULL-renderer-better.patch
(upstreamed).
2017-01-30 10:47:33 +01:00
-------------------------------------------------------------------
Thu Jan 26 22:11:01 UTC 2017 - zaitor@opensuse.org
- Drop use-mkinitrd.patch: No longer needed, mkinitrd is just a
wrapper for dracut now any way, hence this patch is currently
pointless.
2017-01-26 22:04:34 +01:00
-------------------------------------------------------------------
Wed Jan 25 14:38:09 UTC 2017 - fvogt@suse.com
- Remove patch which causes breakage with systemd-vconsole-setup (bsc#1020327):
* 0001-let-it-become-a-real-daemon.patch
- Add upstream patch to fix crash on boot:
* 0001-device-manager-handle-NULL-renderer-better.patch
- Replace removal of framebuffer driver and plymouth-ignore-cirrusdrm.patch
with single patch:
2018-08-30 05:45:25 +02:00
* only_use_fb_for_cirrus_bochs.patch
2017-01-26 22:04:34 +01:00
2017-01-25 14:11:58 +01:00
-------------------------------------------------------------------
Mon Jan 09 17:01:44 UTC 2017 - zaitor@opensuse.org
- Update to version 0.9.2+git20161215.18dd755:
* terminal: refresh geometry after drm device arrives
* logger: stop using carriage returns
* build-goo: don't install systemd units during distcheck
* systemd-units: Fix uninstall script
* configure: switch to tar.xz instead tar.bz2
* libply: fix HiDPI detection
* libply, main: Add device scale setting
* main: support plymouth.force-scale on the kernel command line
* build-goo: make udev support build time optional
* device-manager: dont pass terminal as renderer device
2016-09-06 11:35:37 +02:00
-------------------------------------------------------------------
Tue Sep 06 09:23:50 UTC 2016 - tchvatal@suse.com
- Update to version 0.9.2+git20160823.e4b7e49:
* libply: fix HiDPI detection
* libply, main: Add device scale setting
* main: support plymouth.force-scale on the kernel command line
- Refresh patch:
* 0001-let-it-become-a-real-daemon.patch
-------------------------------------------------------------------
Tue Sep 6 09:22:50 UTC 2016 - tchvatal@suse.com
- Add systemd to buildrequires to properly detect systemd-ask-password
2016-09-01 10:35:45 +02:00
-------------------------------------------------------------------
Thu Aug 4 11:15:47 UTC 2016 - tchvatal@suse.com
- Sort out with spec-cleaner and move all buildrequires to main scope
not to subpkgs, sometimes interpreted wrongly by rpm if it is split
-------------------------------------------------------------------
Thu Aug 4 11:06:30 UTC 2016 - tchvatal@suse.com
- Reduce patches list removing merged upstream (bit differently tho):
* 0001-seats-guard-against-NULL-terminal.patch
* fix-serial-consoles.patch
* plymouth-boot-vga-framebuffer.patch
- Refresh patches:
* 0001-let-it-become-a-real-daemon.patch
- Update to version 0.9.2+git20160620.0e65b86:
* configure: tweak defaults to be more systemd friendly
* text: don't draw if not animating
* terminal: always open terminal in non-blocking mode
* device-manager: probe existing DRM devices at startup
* drm: don't pick up drm master implicitly
* terminal: refresh geometry after drm device arrives
* logger: stop using carriage returns
* build-goo: don't install systemd units during distcheck
* systemd-units: Fix uninstall script
* configure: switch to tar.xz instead tar.bz2
2016-06-01 12:25:35 +02:00
-------------------------------------------------------------------
Wed Jun 1 10:20:05 UTC 2016 - idonmez@suse.com
- Remove framebuffer support bsc#980750 and bsc#982226
2016-02-08 17:17:25 +01:00
-------------------------------------------------------------------
Mon Feb 8 15:00:06 UTC 2016 - fvogt@suse.com
- Add 0003-fix_null_deref.patch as well
- Avoid potential SEGV if label plugin fails to load
2016-02-08 15:24:08 +01:00
-------------------------------------------------------------------
Wed Jan 20 13:14:31 UTC 2016 - fvogt@suse.com
- Add 0001-Add-label-ft-plugin.patch and
0002-Install-label-ft-plugin-into-initrd-if-available.patch:
- Ability to output text in initrd, needed for encryption
- boo#959986
2016-01-13 19:15:35 +01:00
-------------------------------------------------------------------
Mon Dec 28 14:48:48 UTC 2015 - dimstar@opensuse.org
- Update to version 0.9.2:
+ two-step: Add separate startup / shutdown animations.
+ device-manager: try fb device if drm device failed.
+ Port to GTK+ 3.0.
+ script support system update events.
+ Drop the obsolete log-viewer
- Rebase patches:
+ plymouth-fix-window-size
+ stop-graphical.patch
2018-08-30 05:45:25 +02:00
+ 0001-Some-greenish-openSUSE-colors.patch
2016-01-13 19:15:35 +01:00
+ fix-serial-consoles.patch
+ 0001-seats-guard-against-NULL-terminal.patch
+ plymouth-ignore-cirrusdrm.patch
+ plymouth-boot-vga-framebuffer.patch
+ 0001-let-it-become-a-real-daemon.patch
- Drop upstream fixed patches:
+ 0001-device-manager-only-call-ply_terminal_free.patch
+ 0001-splash-remove-pixel_pixel-in-sprite-lib-when-notifie.patch
+ 0001-splash-do-not-process-display-lists-if-it-is-empty.patch
+ 0001-libply-splash-core-also-monitor-for-file-removal-in-.patch
+ 0001-seat-be-a-little-more-forgiving-in-the-case-there-s-.patch
+ 0001-text-step-bar-use-correct-utf-8-multibyte-sequence-f.patch
- Replace pkgconfig(gtk+-2.0) BuildRequires with
pkgconfig(gtk+-3.0), following upstreams port to GTK+ 3.0.
- Rename library subpackage from *2 to *4, followings upstreams
soname bump.
- Drop utils subpackage: the log-viewer, which was the only tool
left, has been dropped.
2015-12-15 17:55:33 +01:00
-------------------------------------------------------------------
Thu Dec 10 17:15:36 CET 2015 - tiwai@suse.de
- Fix missing dependency on coreutils for initrd macros (boo#958562)
- Call missing initrd macro at postun (boo#958562)
2015-09-21 14:15:27 +02:00
-------------------------------------------------------------------
Mon Sep 21 12:15:11 UTC 2015 - idonmez@suse.com
- Use is_opensuse to simplify if/else block
2015-09-04 11:41:42 +02:00
-------------------------------------------------------------------
Fri Sep 4 09:41:01 UTC 2015 - idonmez@suse.com
- Add a direct dependency on systemd, since we need to know the
path to systemd-tty-ask-password-agent, fixes part of bsc#943312
2014-11-10 18:48:41 +01:00
-------------------------------------------------------------------
Sat Nov 08 17:05:00 UTC 2014 - Led <ledest@gmail.com>
- fix bashisms in post/postun scripts
2014-09-25 15:21:13 +02:00
-------------------------------------------------------------------
Thu Sep 25 13:19:01 UTC 2014 - idonmez@suse.com
2014-09-25 15:23:16 +02:00
- Update 0001-let-it-become-a-real-daemon.patch to call setsid
only from the child process.
2014-09-25 15:21:13 +02:00
2014-09-12 14:52:26 +02:00
-------------------------------------------------------------------
Fri Sep 12 12:50:06 UTC 2014 - idonmez@suse.com
- Add 0001-let-it-become-a-real-daemon.patch to make plymouth
2014-09-25 15:21:13 +02:00
a real daemon, fixes part of bnc#889757. Patch by Werner.
2014-09-12 14:52:26 +02:00
2014-09-08 12:11:39 +02:00
-------------------------------------------------------------------
Thu Sep 4 10:34:25 UTC 2014 - idonmez@suse.com
- Add plymouth-boot-vga-framebuffer.patch to fix boot_vga
problem with framebuffer devices. (bnc#886211)
2014-08-11 16:31:21 +02:00
-------------------------------------------------------------------
Mon Aug 11 14:23:27 UTC 2014 - idonmez@suse.com
- Modify plymouth-ignore-cirrusdrm.patch to return as
early as possible. Patch by glin@suse.com
2014-07-27 14:23:19 +02:00
-------------------------------------------------------------------
2014-08-07 13:00:56 +02:00
Thu Aug 7 09:24:37 UTC 2014 - idonmez@suse.com
- Invert the logic in plymouth-ignore-cirrusdrm.patch bnc#890516
-------------------------------------------------------------------
Mon Jul 28 16:10:49 CEST 2014 - fcrozat@suse.com
- Add
0001-text-step-bar-use-correct-utf-8-multibyte-sequence-f.patch:
2018-08-03 09:09:27 +02:00
fix incorrect UTF-8 code used for square (bnc#886148).
2014-08-07 13:00:56 +02:00
-------------------------------------------------------------------
2014-07-27 14:23:19 +02:00
Fri Jul 25 14:32:38 CEST 2014 - fcrozat@suse.com
- Add plymouth-ignore-cirrusdrm.patch: ignore cirrus drm and use fb
2018-08-03 09:09:27 +02:00
instead (bnc#888590)
2014-07-27 14:23:19 +02:00
-------------------------------------------------------------------
Thu Jul 24 16:30:43 UTC 2014 - fcrozat@suse.com
- Add
0001-seat-be-a-little-more-forgiving-in-the-case-there-s-.patch:
Be more forgiving with empty seat.
2014-07-10 10:55:13 +02:00
-------------------------------------------------------------------
Tue Jul 8 16:04:38 UTC 2014 - fcrozat@suse.com
2018-08-30 05:45:25 +02:00
- Update 0001-Some-greenish-openSUSE-colors.patch to also use SUSE
2018-08-03 09:09:27 +02:00
colors on tribar (bnc#886148)
2014-07-10 10:55:13 +02:00
2014-06-20 14:36:53 +02:00
-------------------------------------------------------------------
2014-06-28 07:08:31 +02:00
Fri Jun 27 11:27:02 UTC 2014 - fcrozat@suse.com
- Add
0001-libply-splash-core-also-monitor-for-file-removal-in-.patch:
handle new udev behaviour in seqnum removal.
2014-07-10 10:55:13 +02:00
2014-06-28 07:08:31 +02:00
-------------------------------------------------------------------
2014-06-25 22:44:01 +02:00
Fri Jun 20 14:03:36 UTC 2014 - fcrozat@suse.com
- Add
0001-splash-do-not-process-display-lists-if-it-is-empty.patch:
fix crash when calling plymouth quit
- Add 0001-seats-guard-against-NULL-terminal.patch: guard against
NULL terminal.
- Update stop-graphical.patch: add RemainAfterExit=true to
plymouth-start.service, ensuring plymouthd is not restarted when
switching between runlevels.
2014-07-10 10:55:13 +02:00
2014-06-25 22:44:01 +02:00
-------------------------------------------------------------------
2014-06-20 14:36:53 +02:00
Thu Jun 19 14:22:44 UTC 2014 - fcrozat@suse.com
- Add
0001-splash-remove-pixel_pixel-in-sprite-lib-when-notifie.patch:
fix crash when pixel_display is removed.
- Add 0001-device-manager-only-call-ply_terminal_free.patch: fix
crash.
- Add use-mkinitrd.patch: call mkinitrd -B, not dracut for now,
otherwise initramfs is being created by plymouth-update-initrd,
not initrd file.
- Ensure we don't rebuild initrd twice when updating plymouth.
- Ensure default theme is SLE/openSUSE (based on %suse_version)
2014-06-06 22:29:23 +02:00
-------------------------------------------------------------------
Fri Jun 6 16:16:38 UTC 2014 - fcrozat@suse.com
- Release 0.9.0 (3 additional fixes compared to previously packaged
git snapshot):
+ Use udev for graphics device enumeration
+ Add new text plugin to replace the tribar one
+ Add background tiling and watermark support to two-step
+ Make various plymouth commands that change state be resilient
to being called multiple times
+ Support going back to the initrd at shutdown
+ Keyfile parser improvements
+ Make plymouthd use better defaults when running on top of X11
+ Fixes for systems using QXL
+ minor two-step plugin fixes
+ Use /sys/class/tty/console/active instead of parsing
/proc/cmdline for consoles.
+ Documentation improvements
+ Drop driver specific renderers and use generic driver across the
board.
+ Better debug message output
+ systemd integration fixes
+ upstart integration fixes
+ initrd scripts fixes
+ Misc fixes
2014-06-05 09:26:55 +02:00
-------------------------------------------------------------------
Thu Jun 5 07:24:10 UTC 2014 - idonmez@suse.com
- Update fix-serial-consoles.patch to fix a crash in some rare
cases.
2014-05-26 10:07:03 +02:00
-------------------------------------------------------------------
Wed May 21 12:11:25 UTC 2014 - idonmez@suse.com
- Add fix-serial-consoles.patch to fix binary garbage on serial
consoles. This is bnc#873859
2014-05-11 18:31:56 +02:00
-------------------------------------------------------------------
Mon May 5 12:49:49 UTC 2014 - fcrozat@suse.com
- Remove plymouth-restore-suspend.patch: suspend package is being
dropped, no longer needs to provide this old API.
- Remove requires on suspend package.
2014-04-17 15:03:15 +02:00
-------------------------------------------------------------------
Thu Apr 17 12:56:23 UTC 2014 - idonmez@suse.com
- Update to git snapshot as of 20140327
* Fixes bnc#872502 and bnc#872428
2014-04-16 16:28:58 +02:00
-------------------------------------------------------------------
Wed Apr 16 11:35:30 UTC 2014 - trenn@suse.de
- Kill all mkinitrd stuff
Remove suse-initrd-support
- Tell zypper to regenerate initrd on installation/update via %post and
%posttrans scripts
2014-04-12 23:25:13 +02:00
-------------------------------------------------------------------
Thu Apr 10 10:55:03 UTC 2014 - idonmez@suse.com
- Add plymouth-manpages.patch to fix manpage installation (bnc#871419)
2013-12-17 17:33:50 +01:00
-------------------------------------------------------------------
2014-02-27 03:09:34 +01:00
Thu Feb 20 12:47:03 UTC 2014 - fcrozat@suse.com
- Drop plymouth.conf, it is no longer used, plymouthd.conf is
nowadays.
-------------------------------------------------------------------
2014-04-16 17:29:15 +02:00
Wed Feb 15 10:02:32 UTC 2014 - kigurame@opensuse.org
- Updated from git
- carried over patches
- Dropped 0001-Make-plymouthd-real-daemon-and-save-old-log.patch
Because it is really not necesary
-------------------------------------------------------------------
Wed Feb 12 14:19:48 UTC 2014 - werner@suse.de
- Add patch
0001-Make-plymouthd-real-daemon-and-save-old-log.patch
all daemons should call setsid(2) to become a real daemons without
controlling terminal. Beside this the old boot log will help for
debugging and for support.
-------------------------------------------------------------------
2013-12-17 17:33:50 +01:00
Thu Dec 12 17:42:35 UTC 2013 - uweigand@de.ibm.com
- Add powerpc64le-linux support.
2013-09-27 10:51:51 +02:00
-------------------------------------------------------------------
Thu Sep 26 14:52:07 UTC 2013 - lnussel@suse.de
- disable plymouth in initrd if the root volume is encrypted. This
is a workaround until plymouth is able to handle the prompt
correctly (bnc#834063).
2013-09-11 07:08:23 +02:00
-------------------------------------------------------------------
Wed Sep 11 01:57:40 UTC 2013 - crrodriguez@opensuse.org
- version 0.8.8_git201309032142
- All device specific code has been removed because the kernel
has been fixed in the meanwhile so plymouth no longer requires
libdrm_intel, libdrm_radeon, libdrm_nouveau and can use the generic
interface.
This commit does not add any new features or bugfixes but removes
a huge chunk of unnecessary code.
2013-08-01 16:15:38 +02:00
-------------------------------------------------------------------
2013-08-16 22:38:00 +02:00
Fri Aug 16 12:03:43 UTC 2013 - lmuelle@suse.com
- Pre require plymouth from plymouth-scripts; (bnc#806388).
-------------------------------------------------------------------
2013-08-01 16:15:38 +02:00
Thu Aug 1 14:08:53 UTC 2013 - tittiatcoke@gmail.com
- Update to version 0.8.8_git201308011340
- Drop patch plymouth-correct-systemd-prefix.patch
2013-08-01 16:34:03 +02:00
- Drop patch plymouth-close.patch
2013-08-01 18:02:34 +02:00
- Drop patch plymouth-close-unredirect.patch
- Drop patch plymouth-redirect-null.patch
- Drop patch plymouth-exit-code.patch
- Drop patch plymouth-terminal-session-close.patch
2013-08-01 16:15:38 +02:00
2013-07-29 18:24:02 +02:00
-------------------------------------------------------------------
Mon Jul 29 16:23:21 UTC 2013 - tittiatcoke@gmail.com
- Add upstream patch plymouth-correct-systemd-prefix.patch to
correct the systemd prefixes in some systemd files. This replaces
the sed string.
2013-06-28 09:27:40 +02:00
-------------------------------------------------------------------
Thu Jun 27 19:39:15 UTC 2013 - crrodriguez@opensuse.org
- Require pigz instead of gzip
- ensure plugin requires are versioned.
2013-06-17 14:30:24 +02:00
-------------------------------------------------------------------
Sun Jun 16 23:37:55 UTC 2013 - crrodriguez@opensuse.org
- own %{_localstatedir}/log/boot.log
and %{_localstatedir}/spool/plymouth/boot.log (as %ghost s)
2013-06-11 22:12:23 +02:00
-------------------------------------------------------------------
Tue Jun 11 16:09:57 UTC 2013 - fcrozat@suse.com
- Add plymouth-close: do not try to close negative fd.
- Add plymouth-close-unredirect.patch: do not leak fd when stopping
redirection of /dev/console (bnc#811185)
- Add plymouth-redirect-null.patch: redirect plymouth standard io
to /dev/null (bnc#811185)
- Add plymouth-exit-code.patch: ignore exit code in ExecStartPost.
- Add plymouth-terminal-session-close.patch: do no try to close
terminal session fd if already closed.
2013-05-13 19:06:15 +02:00
-------------------------------------------------------------------
Sun May 12 21:56:30 UTC 2013 - crrodriguez@opensuse.org
- Not only reboot.service is prefixed with systemd- currently
but also kexec,halt,poweroff.
2013-04-23 10:34:36 +02:00
-------------------------------------------------------------------
Mon Apr 22 19:47:44 UTC 2013 - crrodriguez@opensuse.org
- Also ensure we express rpm dependencies correctly
this package is not gonna work on systemd < 186.
-------------------------------------------------------------------
Mon Apr 22 19:32:40 UTC 2013 - crrodriguez@opensuse.org
- Update to version 0.8.8_git201304161248
- drop plymouth-change-service-name.patch, replaced by
a sed script that will account for all service files' future changes
- drop patch plymouth-trace-lines, in upstream now
- drop plymouth-udevadm-path.patch, generic solution in upstream now.
- drop ply-sdunitdir.patch likewise.
- drop plymouth-systemd-in-usr.patch likewise.
- drop systemd-no-warning.patch, not needed with newer systemd
- drop plymouth-sd-notforking.patch , not really needed anymore.
2013-02-28 22:14:02 +01:00
-------------------------------------------------------------------
Thu Feb 28 21:13:14 UTC 2013 - tittiatcoke@gmail.com
- Changed %post scripts so only the rebuild of the initrd is
omitted within the build environment
2013-02-22 17:24:04 +01:00
-------------------------------------------------------------------
Fri Feb 22 16:20:54 UTC 2013 - tittiatcoke@gmail.com
- Added patch plymouth-correct-runtime-dir.patch to make the
plymouthruntimedir equal to /run/plymouth and not /var/run/plymouth
2013-02-06 20:05:00 +01:00
-------------------------------------------------------------------
Wed Feb 6 14:44:11 UTC 2013 - fcrozat@suse.com
- Rename plymouth-sd-notforking.patch to fix typo in patch name
- Add plymouth-change-service-name.patch: fix incorrect service
names used for dependencies. Now use systemd-reboot.service
(replacing reboot.service) and display-manager.service (replacing
prefdm.service).
2012-12-18 16:07:01 +01:00
-------------------------------------------------------------------
Tue Dec 18 15:05:47 UTC 2012 - tittiatcoke@gmail.com
- Make sure that the right version of the scripts is required by
the main package. This to prevent that an update of the scripts
is not installed (bnc#793400)
2012-12-18 16:08:02 +01:00
- Removed obsolete patch plymouth-remove-pid-file.patch. Issue
has been resolved upstream
2012-12-18 16:07:01 +01:00
2012-11-14 11:15:18 +01:00
-------------------------------------------------------------------
Wed Nov 14 09:12:13 UTC 2012 - seife+obs@b1-systems.com
- fix path to systemd-tty-ask-password-agent for newer systemd
- create the pid file again during boot, the existence of this is
a condition for systemd-ask-password-plymouth.service. A proper
fix might look different but that get's it going again.
2012-11-06 19:14:20 +01:00
-------------------------------------------------------------------
Tue Nov 6 18:07:29 UTC 2012 - tittiatcoke@gmail.com
- Provide the scripts to integrate Plymouth in dracut as a
separate package.
- Added patch (plymouth-dracut-path.patch) to correct the paths
inside the specific plymouth-dracut scripts
2012-11-05 19:19:28 +01:00
-------------------------------------------------------------------
Mon Nov 5 17:35:39 UTC 2012 - crrodriguez@opensuse.org
- Update to an slightly newer git snapshot to fix regression
from 0.8.8
-------------------------------------------------------------------
Thu Nov 1 21:36:22 UTC 2012 - crrodriguez@opensuse.org
- Version 0.8.8
* main: Try to own socket before anything else
* main: silently succeed if plymouthd is started a second time
* service: start plymouthd unconditionally
* x11: make window fullscreen by default
* x11: only create windows when necessary
-------------------------------------------------------------------
Thu Nov 1 20:35:34 UTC 2012 - crrodriguez@opensuse.org
- plymoith-sd-notforking.patch: Make plymouthd to not use
Service type "forking"
- ply-sdunitdir.patch: Must install units in %{_unitdir} as
returned by pkg-config not in a hardcoded location.
2012-10-12 11:05:23 +02:00
-------------------------------------------------------------------
Fri Oct 12 08:59:08 UTC 2012 - tittiatcoke@gmail.com
- Remove the non required font file in /etc/fonts/conf.avail/ .
2012-10-11 14:25:25 +02:00
-------------------------------------------------------------------
Thu Oct 11 12:21:37 UTC 2012 - tittiatcoke@gmail.com
2012-10-11 16:41:24 +02:00
- Adjusted the upstream patch to remove the pid file. The original
one seems to cause issues with the DM killing plymouth
2012-10-11 14:25:25 +02:00
2012-10-11 11:17:16 +02:00
-------------------------------------------------------------------
Thu Oct 11 09:13:33 UTC 2012 - tittiatcoke@gmail.com
- Fix the Pango installation within the initrd. This would
resolve the error message that Pango cannot find any fonts
-------------------------------------------------------------------
Thu Sep 27 12:37:13 UTC 2012 - tittiatcoke@gmail.com
- fix the libdir path in plymouth-set-default-theme (bnc#780085)
2012-09-20 11:15:03 +02:00
-------------------------------------------------------------------
Thu Sep 20 09:45:07 UTC 2012 - tittiatcoke@gmail.com
- Update to version 0.8.7
+ fix plymouth race at bootup breaking efi/vesa handoff
+ Systemd fixes
- Add plymouth-remove-pid-file.patch: remove PID file usage
(bnc#780976) (Thanks to fcrozat)
- Remove upstream patches: plymouth-systemd-target.patch,
0001-ply-text-progress-bar-strip-quotes-if-present,patch,
plymouth-fix-systemd-service.patch, plymouth-after-udev-settle
due to upstream inclusion.
2012-08-23 10:06:58 +02:00
-------------------------------------------------------------------
Wed Aug 22 14:04:13 UTC 2012 - fcrozat@suse.com
- Add plymouth-after-udev-settle.patch: ensure plymouth is started
after udev triggers has been started (git + name change due to
systemd < 183 in openSUSE 12.2).
2012-08-22 13:44:32 +02:00
-------------------------------------------------------------------
Wed Aug 22 11:41:57 UTC 2012 - tittiatcoke@gmail.com
- Ensure that the right Pango version is used for copying one of
the pango modules
2012-08-08 16:39:00 +02:00
-------------------------------------------------------------------
Wed Aug 8 09:03:58 UTC 2012 - fcrozat@suse.com
- Add plymouth-fix-systemd-service.patch: remove dashes next to
semi-colons, it confuses systemd. (bnc#774400)
- Update suse-initrd-support to not start plymouth if kernel
cmdline contains "shell" or "plymouth.enable=0" or
"rd.plymouth=0".
2012-08-06 20:27:13 +02:00
-------------------------------------------------------------------
Mon Aug 6 12:39:41 UTC 2012 - dmueller@suse.com
- remove suspend dependency on ARM
2012-07-30 10:32:08 +02:00
-------------------------------------------------------------------
Sun Jul 29 18:44:18 UTC 2012 - jengelh@inai.de
- Ship /etc/os-release in the initrd so that the pretty name is
displayed in text-splash mode
- Give the text-splash some SUSE-typical green coloring
2012-07-29 20:08:06 +02:00
-------------------------------------------------------------------
Sun Jul 29 18:07:39 UTC 2012 - dmueller@suse.com
- fix build for ARM
2012-07-27 15:08:57 +02:00
-------------------------------------------------------------------
Thu Jul 26 13:33:28 UTC 2012 - tittiatcoke@gmail.com
- Move the openSUSE branding to its rightful place
2012-07-23 11:00:40 +02:00
-------------------------------------------------------------------
Fri Jul 20 08:57:25 UTC 2012 - fcrozat@suse.com
- Update to 0.8.6.1:
+ Fix systemd path file generation
- Changes from 0.8.6:
+ fix flush_area fast-path
+ seed random number generator by default for script plugins
+ allow plymouth to be built without gtk dependency
+ cope with lack of /etc/os-release better
+ pull in systemd unit files (bnc#770890)
+ add support for new "updates" mode for doing package updates
(only available for some plugins at the moment)
- Add plymouth-restore-suspend.patch: revert commit removing
suspend/resume support, needed for suspend package.
- Add plymouth-systemd-target.patch: add missing symlinks to start
plymouth on shutdown / reboot / kexec (bnc#770764).
- Add plymouth-udevadm-path.patch: adapt to udevadm path on
openSUSE.
- Ensure systemctl daemon-reload is called in post / postun
- Add systemd-no-warning.patch: remove Documentation tag not
handled by systemd v44.
- Update stop-graphical.patch to correct prevent plymouth.quit to
start under runlevel 5 (handled by xdm initscript directly).
2012-07-07 08:04:50 +02:00
-------------------------------------------------------------------
Fri Jul 6 23:13:15 UTC 2012 - dvaleev@suse.com
- don't require intel_drm on ppc
2012-07-06 09:50:28 +02:00
-------------------------------------------------------------------
Wed Jul 4 13:07:45 UTC 2012 - meissner@suse.com
- run "/sbin/mkinitrd" and let it figure out by itself
what initrds to update. bnc#769812
2012-07-02 21:25:25 +02:00
-------------------------------------------------------------------
Mon Jul 2 11:19:04 UTC 2012 - fcrozat@suse.com
- Provides systemd units, instead of relying on systemd to ship
them (bnc#769397).
- Ensure plymouth--wait-quit.service conflicts with
graphical.target.
2012-06-29 10:42:04 +02:00
-------------------------------------------------------------------
Fri Jun 29 08:35:41 UTC 2012 - tittiatcoke@gmail.com
- Update to 0.8.5.1
+ two-step splash plugin quit fixes
+ add generic driver to drm renderer plugin
This allows new modesetting drivers to work with plymouth
automatically
+ fixes for video cards that don't support 32bpp
+ add alignment and width features to label controls
+ new documentation
+ event loop fix
+ more serial console fixes
+ better systemd integration
+ new flush api to client library
+ Allow plymouth to build the drm renderer without the driver
dependent libdrm_* libraries.
2012-06-11 12:20:12 +02:00
-------------------------------------------------------------------
2012-06-21 16:20:37 +02:00
Thu Jun 21 09:48:11 UTC 2012 - lnussel@suse.de
- disable plymouth if init is not systemd (could be e.g. /bin/sh or
sysvinit then)
-------------------------------------------------------------------
2012-06-11 12:20:12 +02:00
Mon Jun 11 10:19:49 UTC 2012 - coolo@suse.com
- if we provide bootsplash, we should also make sure to obsolete
its version
2012-06-04 20:36:53 +02:00
-------------------------------------------------------------------
Mon Jun 4 18:34:08 UTC 2012 - tittiatcoke@gmail.com
2012-06-04 21:20:32 +02:00
- Ensure that the openSUSE theme is default. (bnc#765277)
2012-06-04 20:36:53 +02:00
- Remove unnecessary changes to the kernel options. Plymouth also
accepts splash=silent.
2012-05-31 09:55:22 +02:00
-------------------------------------------------------------------
Wed May 30 16:41:02 UTC 2012 - vuntz@opensuse.org
- Add plymouth-scripts Requires(post) to branding-openSUSE
subpackage, to make sure that the %post scriptlet will work.
- Make sure we export LIB and not lib in the %postun scriptlets of
theme-solar and branding-openSUSE subpackages.
2012-05-21 13:26:08 +02:00
-------------------------------------------------------------------
2012-05-29 12:03:35 +02:00
Tue May 29 10:03:07 UTC 2012 - tittiatcoke@gmail.com
- Ensure that label.so is being installed for the openSUSE branding
(bnc#763574)
-------------------------------------------------------------------
2012-05-21 13:26:08 +02:00
Mon May 21 11:25:36 UTC 2012 - tittiatcoke@gmail.com
- Update the installation/update from plymouth in a way that the
initrd file for the current running kernel is updated.
2012-05-21 13:36:58 +02:00
- Corrected a typo with regards to the location of a pango module
when setting up the initrd.
2012-05-21 13:26:08 +02:00
2012-05-15 11:10:11 +02:00
-------------------------------------------------------------------
Tue May 15 09:09:23 UTC 2012 - tittiatcoke@gmail.com
- Added a patch for openSUSE to enable the rebuild of the initrd
with the plymouth-set-default-theme script. (bnc#757284)
2012-05-13 21:22:32 +02:00
-------------------------------------------------------------------
Sun May 13 19:21:24 UTC 2012 - tittiatcoke@gmail.com
- Added plymouth to the requires of plymouth-scripts. This
should resolve bug (bnc#757284)
2012-05-12 07:57:28 +02:00
-------------------------------------------------------------------
Fri May 11 19:56:24 UTC 2012 - nmo.marques@gmail.com
- Split x11 renderer into his own package; the x11 renderer allows
users to test plymouth themes; having it available on the devel
package will force people who just want to test a theme to
install a lot of unwanted dependencies. Being on it's own package
without explicit dependencies provides extra functionality to
users who want to test themes without having to rebuild initrd
and rebooting for testing.
- bnc#761403
2012-04-26 18:01:04 +02:00
-------------------------------------------------------------------
2012-04-28 09:01:46 +02:00
Sat Apr 28 07:00:56 UTC 2012 - tittiatcoke@gmail.com
2012-04-26 18:01:04 +02:00
- Reduce the number of fonts that are included in the initrd. Also
let mkinitrd sort out the dependencies for the required libs.
- Use the same font as that grub2 is currently using for it's
graphics mode.
2012-04-17 15:26:26 +02:00
-------------------------------------------------------------------
Tue Apr 17 10:30:57 UTC 2012 - glin@suse.com
- Correct the theme name in the post install script of
plymouth-branding-openSUSE
2012-03-29 11:39:12 +02:00
-------------------------------------------------------------------
2012-04-05 16:46:03 +02:00
Thu Apr 5 14:44:25 UTC 2012 - tittiatcoke@gmail.com
2012-03-29 11:39:12 +02:00
2012-04-05 16:46:03 +02:00
- Updated the initrd patch to include the necessary files to have
text support (e.g. LUKS passphrase question, etc)
- Temporarily added a openSUSE plymouth theme
(plymouth-branding-openSUSE) to have a better integration with
12.2.
2012-03-29 11:39:12 +02:00
2012-04-05 16:59:39 +02:00
-------------------------------------------------------------------
2012-04-05 17:03:46 +02:00
Thu Mar 29 09:36:32 UTC 2012 - tittiatcoke@gmail.com
2012-04-05 16:59:39 +02:00
- Ensure that both grub and grub2 are adjusted with regards to the
splash parameter. Running grub2-mkconfig to have the right
configuration.
- Installation of themes are not causing any reset of the selected
default theme anymore. Now this only happens when a theme is
installed and the default theme is set to TEXT.
2012-03-26 08:10:46 +02:00
-------------------------------------------------------------------
Sun Mar 25 09:03:44 UTC 2012 - tittiatcoke@gmail.com
- Update to the official release of 0.8.4
2012-04-05 16:59:39 +02:00
* Bugfix: Use /dev/fb0 instead of /dev/fb, this resolves the
issue of not showing the splash during shutdown
2012-03-26 08:10:46 +02:00
-------------------------------------------------------------------
Fri Mar 9 12:11:44 UTC 2012 - tittiatcoke@gmail.com
- Add a small change in order to have plymouth activated with Grub2
2012-02-23 16:58:59 +01:00
-------------------------------------------------------------------
Thu Feb 23 15:57:44 UTC 2012 - tittiatcoke@gmail.com
- Make sure that the package libply-boot-client is always
installed to prevent a system that will not boot
2012-02-23 14:08:44 +01:00
-------------------------------------------------------------------
Thu Feb 23 12:38:51 UTC 2012 - saschpe@suse.de
- Replaced package core-libs with individual packages for each shared
library (SLPP)
- Proper provides/obsoletes pair for bootsplash
- Could not resist to run spec-cleaner ;-)
2012-02-21 10:52:47 +01:00
-------------------------------------------------------------------
Tue Feb 21 09:49:52 UTC 2012 - tittiatcoke@gmail.com
- Changed the parameters to plymouthd in the initrd to create
the necessary pid-file for the systemd integration
2012-02-17 19:05:45 +01:00
-------------------------------------------------------------------
Fri Feb 17 18:04:29 UTC 2012 - tittiatcoke@gmail.com
- Ensure that /bin/plymouth still is available as that the
displaymanagers (KDM/GDM) are expecting this. This needs to be
in place until the migration to /usr is completed.
2012-02-17 14:55:24 +01:00
-------------------------------------------------------------------
Fri Feb 17 09:25:11 UTC 2012 - tittiatcoke@gmail.com
- Finalize the Plymouth integration on openSUSE.
* Current default theme is Solar with the openSUSE Geecko
* Plymouth bootsplash will run on tty7 during boot.
* Install all files in /usr
-------------------------------------------------------------------
Tue Dec 27 16:19:56 UTC 2011 - crrodriguez@opensuse.org
- Update to current git
-------------------------------------------------------------------
Wed Mar 23 02:25:44 CET 2011 - jeffm@suse.de
- Update to git snapshot from 12 Mar 2011.
- Mostly minor fixes.
-------------------------------------------------------------------
Sat Feb 5 23:49:30 CET 2011 - jeffm@suse.de
- Updated to latest snapshot.
- boot-server: improve debug output
- pixel-buffer: Fix overflow in blend_two_pixel_values
- boot-server: fix debug output when message is from init
- Fixed an issue with the script plugin's Window attributes returning
the size of the smallest display when multiple displays are used.
-------------------------------------------------------------------
Wed Dec 29 16:56:30 CET 2010 - jeffm@suse.de
- Fixed location of text.so and details.so in plymouth-scripts
-------------------------------------------------------------------
Wed Dec 22 10:20:54 UTC 2010 - seife+obs@b1-systems.com
- fix the build failure:
- own additional directories
- fix rpmlint failures:
- fix up package groups - those are just guessed sometimes
- rename plymouth-graphics-libs to libply-splash-graphics2
(this one was fatal)
- do not own /var/run/plymouth - probably still needs fixing
(this was almost fatal)
- do not include build date in binary, use mtime of source
patchfile instead
-------------------------------------------------------------------
Wed Dec 8 22:44:13 CET 2010 - jeffm@suse.de
- Initial packaging.
