a05877c7b8
- update to 2,9.4 * tls support: Support to turn off the TLSv1.1 and TLSv1.2 protocols: To temporarily turn off problematic protocols globally: /etc/postfix/main.cf: smtp_tls_protocols = !SSLv2, !TLSv1.1, !TLSv1.2 smtp_tls_mandatory_protocols = !SSLv2, !TLSv1.1, !TLSv1.2 However, it may be better to temporarily turn off problematic protocols for broken sites only: /etc/postfix/main.cf: smtp_tls_policy_maps = hash:/etc/postfix/tls_policy /etc/postfix/tls_policy: example.com may protocols=!SSLv2:!TLSv1.1:!TLSv1.2 * 20111012 To simplify integration with third-party applications, the Postfix sendmail command now always transforms all input lines ending in <CR><LF> into UNIX format (lines ending in <LF>). Specify "sendmail_fix_line_endings = strict" to restore historical Postfix behavior (i.e. convert all input lines ending in <CR><LF> only if the first line ends in <CR><LF>). * 20120114 Logfile-based alerting systems may need to be updated to look for "error" messages in addition to "fatal" messages. Specify "daemon_table_open_error_is_fatal = yes" to get the historical behavior (immediate termination with "fatal" message). * enable_long_queue_ids Postfix 2.9 introduces support for non-repeating queue IDs (also used as queue file names). These names are encoded in a mix of upper case, lower case and decimal digit characters. Long queue IDs are disabled by default to avoid breaking tools that parse logfiles and that expect queue IDs with the smaller [A-F0-9] character set. * 20111209 memcache lookup and update support. This provides a way to share postscreen(8) or verify(8) caches between Postfix
Peter Varkoly2013-01-10 15:05:52 +00:00
dcdcda0a8e
- update to 2,9.4 * tls support: Support to turn off the TLSv1.1 and TLSv1.2 protocols: To temporarily turn off problematic protocols globally: /etc/postfix/main.cf: smtp_tls_protocols = !SSLv2, !TLSv1.1, !TLSv1.2 smtp_tls_mandatory_protocols = !SSLv2, !TLSv1.1, !TLSv1.2 However, it may be better to temporarily turn off problematic protocols for broken sites only: /etc/postfix/main.cf: smtp_tls_policy_maps = hash:/etc/postfix/tls_policy /etc/postfix/tls_policy: example.com may protocols=!SSLv2:!TLSv1.1:!TLSv1.2 * 20111012 To simplify integration with third-party applications, the Postfix sendmail command now always transforms all input lines ending in <CR><LF> into UNIX format (lines ending in <LF>). Specify "sendmail_fix_line_endings = strict" to restore historical Postfix behavior (i.e. convert all input lines ending in <CR><LF> only if the first line ends in <CR><LF>). * 20120114 Logfile-based alerting systems may need to be updated to look for "error" messages in addition to "fatal" messages. Specify "daemon_table_open_error_is_fatal = yes" to get the historical behavior (immediate termination with "fatal" message). * enable_long_queue_ids Postfix 2.9 introduces support for non-repeating queue IDs (also used as queue file names). These names are encoded in a mix of upper case, lower case and decimal digit characters. Long queue IDs are disabled by default to avoid breaking tools that parse logfiles and that expect queue IDs with the smaller [A-F0-9] character set. * 20111209 memcache lookup and update support. This provides a way to share postscreen(8) or verify(8) caches between Postfix
Peter Varkoly2013-01-10 15:05:52 +00:00
63c913ba5c
Accepting request 145540 from server:mail
Stephan Kulow
2012-12-17 08:36:46 +00:00
7cafeb4bc0
Accepting request 145540 from server:mail
Stephan Kulow
2012-12-17 08:36:46 +00:00
1f6520d3c3
Accepting request 145539 from home:computersalat:devel:mail
Christian Wittmer
2012-12-15 17:09:41 +00:00
cba2e1280c
Accepting request 145539 from home:computersalat:devel:mail
Christian Wittmer
2012-12-15 17:09:41 +00:00
06a0ed56a4
- bnc#790141 - Command SuSEconfig.postfix reports ERROR - "can not find /lib/YaST/SuSEconfig.functions!!"
Peter Varkoly2012-12-14 06:00:56 +00:00
39b2cf4166
- bnc#790141 - Command SuSEconfig.postfix reports ERROR - "can not find /lib/YaST/SuSEconfig.functions!!"
Peter Varkoly2012-12-14 06:00:56 +00:00
199331f15f
- bnc#782048 - postfix uses /sbin/conf.d - bnc#784659 - remove SuSEconfig calls from yast2-mail
Peter Varkoly2012-11-08 11:34:59 +00:00
1c7232c4ee
- bnc#782048 - postfix uses /sbin/conf.d - bnc#784659 - remove SuSEconfig calls from yast2-mail
Peter Varkoly2012-11-08 11:34:59 +00:00
aebdf3ceaa
Working on a solution on all bugs coused by SuSEconfig
Peter Varkoly2012-11-07 10:19:52 +00:00
4fa7c6c4ce
Working on a solution on all bugs coused by SuSEconfig
Peter Varkoly2012-11-07 10:19:52 +00:00
99e365e353
Accepting request 134121 from server:mail
Stephan Kulow
2012-09-17 12:03:23 +00:00
974c4994b2
Accepting request 134121 from server:mail
Stephan Kulow
2012-09-17 12:03:23 +00:00
5e05d51ad9
Accepting request 131303 from home:computersalat:devel:mail
Christian Wittmer
2012-08-21 15:29:38 +00:00
423ba78ec2
Accepting request 131303 from home:computersalat:devel:mail
Christian Wittmer
2012-08-21 15:29:38 +00:00
a902cf6f6f
Accepting request 128300 from server:mail
Stephan Kulow
2012-07-19 15:59:15 +00:00
7e81c2fa80
Accepting request 128300 from server:mail
Stephan Kulow
2012-07-19 15:59:15 +00:00
b072d88e8c
- bnc#771811 - postfix update does not regenerate the maps
Peter Varkoly2012-07-19 06:53:36 +00:00
32985961ee
- bnc#771811 - postfix update does not regenerate the maps
Peter Varkoly2012-07-19 06:53:36 +00:00
34bace288c
Accepting request 124415 from server:mail
Stephan Kulow
2012-06-13 10:42:33 +00:00
1828992826
Accepting request 124415 from server:mail
Stephan Kulow
2012-06-13 10:42:33 +00:00
00b4a6302e
- Bugfix (introduced Postfix 2.4): the event_drain() function was comparing bitmasks incorrectly causing the program to always wait for the full time limit. This error affected the unused postkick command, but only after s/fifo/unix/ in master.cf. File: util/events.c. - Cleanup: laptop users have always been able to avoid unnecessary disk spin-up by doing s/fifo/unix/ in master.cf (this is currently not supported on Solaris systems). However, to make this work reliably, the "postqueue -f" command must wait until its requests have reached the pickup and qmgr servers before closing the UNIX-domain request sockets. Files: postqueue/postqueue.c, postqueue/Makefile.in.
Peter Varkoly2012-06-11 09:53:01 +00:00
80ff77fdb3
- Bugfix (introduced Postfix 2.4): the event_drain() function was comparing bitmasks incorrectly causing the program to always wait for the full time limit. This error affected the unused postkick command, but only after s/fifo/unix/ in master.cf. File: util/events.c. - Cleanup: laptop users have always been able to avoid unnecessary disk spin-up by doing s/fifo/unix/ in master.cf (this is currently not supported on Solaris systems). However, to make this work reliably, the "postqueue -f" command must wait until its requests have reached the pickup and qmgr servers before closing the UNIX-domain request sockets. Files: postqueue/postqueue.c, postqueue/Makefile.in.
Peter Varkoly2012-06-11 09:53:01 +00:00
fe00f8da3f
Accepting request 117029 from server:mail
Stephan Kulow
2012-05-09 16:20:20 +00:00
e5dcf63513
Accepting request 117029 from server:mail
Stephan Kulow
2012-05-09 16:20:20 +00:00
0e2b3768ed
Accepting request 107562 from server:mail
Stephan Kulow
2012-03-01 16:26:04 +00:00
ddf8c8627b
Accepting request 107562 from server:mail
Stephan Kulow
2012-03-01 16:26:04 +00:00
fc77f5e46d
Accepting request 107223 from home:computersalat:devel:mail
Christian Wittmer
2012-02-29 14:44:33 +00:00
66b2b31609
Accepting request 107223 from home:computersalat:devel:mail
Christian Wittmer
2012-02-29 14:44:33 +00:00
cf3f07e51f
Accepting request 101522 from server:mail
Stephan Kulow
2012-01-26 15:00:05 +00:00
09fac4ec4f
Accepting request 101522 from server:mail
Stephan Kulow
2012-01-26 15:00:05 +00:00
7250615b62
- bnc#743369 - yast2 mail module does not open the firewall - Set MD5DIR in SuSEconfig.postfix to avoid warnings
Peter Varkoly2012-01-25 15:13:45 +00:00
f6ff91d4c2
- bnc#743369 - yast2 mail module does not open the firewall - Set MD5DIR in SuSEconfig.postfix to avoid warnings
Peter Varkoly2012-01-25 15:13:45 +00:00
c103e35a3e
Accepting request 99904 from server:mail
Stephan Kulow
2012-01-19 08:44:09 +00:00
c96c81c738
Accepting request 99904 from server:mail
Stephan Kulow
2012-01-19 08:44:09 +00:00
59c234a878
- bnc738693 - upgrade from 11.4 enables mysql service for systemd
Peter Varkoly2012-01-17 11:15:16 +00:00
87b768e7ad
- bnc738693 - upgrade from 11.4 enables mysql service for systemd
Peter Varkoly2012-01-17 11:15:16 +00:00
a4860bd88c
- Add postmap rebuild script to systemv init script too
Peter Varkoly2012-01-12 12:19:52 +00:00
24fc1e7e3d
- Add postmap rebuild script to systemv init script too
Peter Varkoly2012-01-12 12:19:52 +00:00
8ccf8e29e7
Accepting request 94921 from server:mail
Stephan Kulow
2011-12-02 12:22:11 +00:00
56f1094e47
Accepting request 94921 from server:mail
Stephan Kulow
2011-12-02 12:22:11 +00:00
65247b8c6a
- bnc#728308 - warning output after update the postfix package
Peter Varkoly2011-12-02 06:45:03 +00:00
457e02b544
- bnc#728308 - warning output after update the postfix package
Peter Varkoly2011-12-02 06:45:03 +00:00
1790768db9
Accepting request 90873 from server:mail
Stephan Kulow
2011-11-10 15:03:25 +00:00
0cc57de94a
Accepting request 90873 from server:mail
Stephan Kulow
2011-11-10 15:03:25 +00:00
99fb4c238d
- update to 2.8.7 Bugfixes: smtpd(8) did not sanitize newline characters in cleanup(8) REJECT messages, causing them to be sent out via SMTP as bare newline characters. smtpd(8) sent multi-line responses from a before-queue content filter as text with bare <LF> instead of <CR><LF>. Workaround: postscreen sent non-compliant SMTP responses (220- followed by 421) when it could not give a connection to a real smtpd process, causing some remote SMTP clients to bounce mail.
Peter Varkoly2011-11-09 20:12:10 +00:00
9aee3b6516
- update to 2.8.7 Bugfixes: smtpd(8) did not sanitize newline characters in cleanup(8) REJECT messages, causing them to be sent out via SMTP as bare newline characters. smtpd(8) sent multi-line responses from a before-queue content filter as text with bare <LF> instead of <CR><LF>. Workaround: postscreen sent non-compliant SMTP responses (220- followed by 421) when it could not give a connection to a real smtpd process, causing some remote SMTP clients to bounce mail.
Peter Varkoly2011-11-09 20:12:10 +00:00
15aa895be0
Accepting request 90051 from server:mail
Stephan Kulow
2011-11-05 10:22:55 +00:00
dbfe16d50f
Accepting request 90051 from server:mail
Stephan Kulow
2011-11-05 10:22:55 +00:00
750828c304
- Use the systemd macros in the spec file
Peter Varkoly2011-11-03 15:56:57 +00:00
f3e7f3bdc4
- Use the systemd macros in the spec file
Peter Varkoly2011-11-03 15:56:57 +00:00