pv/pv.changes

-------------------------------------------------------------------
Wed Jul 31 04:48:17 UTC 2024 - Andreas Stieger <andreas.stieger@gmx.de>

- update to 1.8.12:
  * fix detection of output block device size
  * do not treat a zero/interrupted write as an end of file

-------------------------------------------------------------------
Sun Jun 30 21:38:22 UTC 2024 - Dirk Müller <dmueller@suse.com>

- update to 1.8.10:
  * feature: new "`--output`" option to write to a file instead
    of standard output (pull request #90) supplied by xmort

-------------------------------------------------------------------
Tue Apr 23 00:44:04 UTC 2024 - Joshua Smith <smolsheep@opensuse.org>

- version update to 1.8.9
  * feature: new "--si" option to display and interpret size
    suffixes in multiples of 1000 rather than 1024
  * fix: continue producing progress output when the output is
    blocking writes
  * fix: honour the TMPDIR / TMP environment variables again,
    rather than hard-coding "/tmp", when using a terminal lock file
  * i18n: corrections and missing strings added to French
    translations

-------------------------------------------------------------------
Wed Feb 14 14:46:34 UTC 2024 - pgajdos@suse.com

- version update to 1.8.5
  * Corrected percentage formatting so it does not jump from 2 to 3
    characters wide at 100%.
  * Replaced `--remote` mechanism to use a temporary file instead
    of SysV IPC, so it can work reliably even when there are
    multiple pv instances.
  * feature: new `--discard` option to discard input as if writing
    to /dev/null.
  * feature: new `--error-skip-block` option to make `--skip-
    errors` skip whole blocks.
  * feature: use `posix_fadvise()` like cat(1) does, to improve
    efficiency.
  * security: with `--pidfile`, write to a temporary file and
    rename it into place, to improve security.
  * security: ignore _TMP_ / _TMPDIR_ environment variables when
    using a terminal lock file.
  * Only report errors about missing files when starting to
    transfer from them, not while calculating size, and behave more
    like cat(1) by skipping them and moving on.
  * Auto-calculate total line count with `--line-mode` when all
    inputs are regular files.
  * Cope with machine suspend/resume and botched timestamps.
  * If `--width` or `--height` were provided, do not change them
    when the window size changes.
  * When a file descriptor position in `--watchfd` moves backwards,
    show the rate using the correct prefix.
  * Rewrite terminal state save/restore so state is not
    intermittently garbled on exit when using `--cursor`.
  * Licensing change from Artistic 2.0 to GPLv3+.

-------------------------------------------------------------------
Thu Nov 30 11:24:57 UTC 2023 - pgajdos@suse.com

- disable testsuite for s390x [bsc#1215338]
- remove _constraints again as it didn't help
- deleted sources
  - _constraints (not needed)

-------------------------------------------------------------------
Wed Nov 15 12:03:39 UTC 2023 - pgajdos@suse.com

- increase required memory in _constraints [bsc#1217165]
  (tests still fails in ETA related tests)

-------------------------------------------------------------------
Tue Sep 26 13:31:17 UTC 2023 - pgajdos@suse.com

- add _constraints [bsc#1215338]

-------------------------------------------------------------------
Sun Jul 30 23:59:53 UTC 2023 - Jan Engelhardt <jengelh@inai.de>

- Update to release 1.7.24
  * correct terminal size detection (was broken by 1.7.17)

-------------------------------------------------------------------
Fri Jul 28 11:42:58 UTC 2023 - Jan Engelhardt <jengelh@inai.de>

- Update to release 1.7.18
  * New "--sync" option to flush cache to disk after every write
  * New "--direct-io" option to bypass cache

-------------------------------------------------------------------
Mon Jul 17 21:18:13 UTC 2023 - Jan Engelhardt <jengelh@inai.de>

- Update to release 1.7.0
  * The "--size" option now accepts "@filename" to use the size
    of another file.
  * New "--bits" option to show bit count instead of byte count.
  * New "--average-rate-window" option, to set the window over
    which the average rate is calculated, also used for ETA.
  * The "--watchfd" option will now show relative filenames, if
    they are under the current directory.
  * Add burst rate limit to transfer, so rate limits are not
    broken by bursty traffic.
  * Corrected elapsed time display to show as D:HH:MM:SS after 1
    day, like the ETA does.

-------------------------------------------------------------------
Fri Nov  5 19:58:05 UTC 2021 - Jan Engelhardt <jengelh@inai.de>

- Update to release 1.6.20
  * Starting pv in the background no longer immediately stops
    unless the transfer is to/from the terminal.
  * Using -B, -A, or -T now switches on -C implicitly.

-------------------------------------------------------------------
Tue Sep  8 08:48:09 UTC 2020 - Jan Engelhardt <jengelh@inai.de>

- Trim old specfile constructs.

-------------------------------------------------------------------
Mon Aug  7 23:34:32 UTC 2017 - jengelh@inai.de

- Update to new upstream release 1.6.6
  * Fix target buffer size (-B) being ignored
  * Cap read/write sizes, and check elapsed time during read/write
    cycle to avoid display hangs with large buffers or slow media.
  * Report error in "-d" if process fd directory is unreadable, or
    if process disappears before we start the main loop.

-------------------------------------------------------------------
Fri Mar 27 17:00:05 UTC 2015 - jengelh@inai.de

- Update to new upstream release 1.6.0
* new option "-D" / "--delay-start" to only show bar after
  N seconds
* new option "--fineta" / "-I" to show ETA as time of day rather
  than time remaining
* change ETA (--eta / -e) so that days are given if the hours
  remaining are 24 or more
* repeat read and write attempts on partial buffer fill/empty to
  work around post-signal transfer rate drop
* output errors on a new line to avoid overwriting transfer bar

-------------------------------------------------------------------
Mon Dec  8 00:36:36 UTC 2014 - jengelh@inai.de

- Update to new upstream release 1.5.7
* show KiB instead of incorrect kiB
* work around awk bug in tests/016-numeric-timer in decimal ","
  locales

-------------------------------------------------------------------
Mon May  5 06:12:30 UTC 2014 - jengelh@inai.de

- Update to new upstream release 1.5.3
* Added new display options --buffer-percent, --last-written
* New transfer option --no-splice
* New option --watchfd to monitor file descriptor status of another
  process, rather than moving data from stdin to stdout.

-------------------------------------------------------------------
Mon Aug 12 10:47:57 UTC 2013 - jengelh@inai.de

- Update to new upstream release 1.4.12
* A fix for splice() not using stdin was implemented
* A new -0/--null option has been added to count NUL-terminated
  "lines"

-------------------------------------------------------------------
Wed Jun  5 17:11:16 UTC 2013 - jengelh@inai.de

- Add explicit BuildRequires for usleep

-------------------------------------------------------------------
Fri Jan 25 03:26:52 UTC 2013 - jengelh@inai.de

- Update to new upstream release 1.4.6
* updated manual page to show known problem with "-R" on Cygwin
* added patch from Pawel Piatek to omit O_NOFOLLOW in AIX

-------------------------------------------------------------------
Mon Dec 24 06:48:09 UTC 2012 - jengelh@inai.de

- Update to new upstream release 1.4.4
* fix crash when progress is displayed with too-small terminal
* new option --skip-errors
* new option --stop-at-size to stop after --size bytes
* autodetermine size if stdout is a block device
* fix a use-after-free bug

-------------------------------------------------------------------
Tue Nov 20 15:18:41 UTC 2012 - jengelh@inai.de

- Update to new upstream release 1.3.9
* new --pidfile option to save process ID to a file
* integrated patch for --numeric with --timer and --bytes
* removed signalling from --remote to prevent accidental process kills
* new --format option and allow --format parameters to be sent
  with --remote

-------------------------------------------------------------------
Sat Sep  1 11:09:24 UTC 2012 - jengelh@inai.de

- Update to new upstream release 1.3.4
* new --disable-splice configure script option
* fixed line mode size count with multiple files
- Use RH-friendly make install

-------------------------------------------------------------------
Mon Jun 25 22:14:15 UTC 2012 - pascal.bleser@opensuse.org

- update to 1.3.1:
  * do not use splice() if the write buffer is not empty
- changes from 1.3.0:
  * fix 1024-boundary display garble
  * use splice(2) where available
  * added known bugs section of the manual page
  * use IEEE1541 units
  * bug with rate limit under 10 fixed
  * speed up PV line mode

-------------------------------------------------------------------
Tue May 22 05:53:15 UTC 2012 - jengelh@inai.de

- Feed through format_spec_file to get copyright header required
  for factory inclusion

-------------------------------------------------------------------
Mon Feb 20 06:52:34 UTC 2012 - jengelh@medozas.de

- Update license field to SPDX format
- Use short URL
- Remove redundant tags/sections from specfile
- Parallel build with %_smp_mflags

-------------------------------------------------------------------
Fri Jan 14 19:00:38 UTC 2011 - pascal.bleser@opensuse.org

- change RPM group to System/Base instead of invalid group System/Tools

-------------------------------------------------------------------
Tue Dec 14 16:06:49 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.2.0:
  * an average rate display option was added to better show progress with bursty traffic
  * a consistent exit status is set to help script writers
  * various minor cleanups and bug fixes were made

-------------------------------------------------------------------
Tue Nov  9 21:55:09 UTC 2010 - pascal.bleser@opensuse.org

- moved to utilities

-------------------------------------------------------------------
Thu Mar  6 00:00:00 UTC 2008 - guru@unixtech.be

- new upstream version


-------------------------------------------------------------------
Mon Oct 22 00:00:00 UTC 2007 - guru@unixtech.be

- moved to openSUSE Build Service


-------------------------------------------------------------------
Thu Aug 30 00:00:00 UTC 2007 - guru@unixtech.be

- new upstream version


-------------------------------------------------------------------
Fri Aug  3 00:00:00 UTC 2007 - guru@unixtech.be

- new upstream version


-------------------------------------------------------------------
Mon Feb  5 00:00:00 UTC 2007 - guru@unixtech.be

- new upstream version


-------------------------------------------------------------------
Tue Feb 28 00:00:00 UTC 2006 - guru@unixtech.be

- new upstream version


-------------------------------------------------------------------
Thu Dec  8 00:00:00 UTC 2005 - guru@unixtech.be

- added debuginfo support
- use makeinstall macro
- use configure macro
- added autoreconf
- use install_info SUSE macros
- use find_lang macro
- rewrote spec file
- new upstream version


-------------------------------------------------------------------
Fri Jun 17 00:00:00 UTC 2005 - guru@unixtech.be

- version 0.9.1


-------------------------------------------------------------------
Sun Nov  7 00:00:00 UTC 2004 - guru@unixtech.be

- version 0.8.9


-------------------------------------------------------------------
Mon May  3 00:00:00 UTC 2004 - guru@unixtech.be

- version 0.8.5


-------------------------------------------------------------------
Sun Apr 25 00:00:00 UTC 2004 - guru@unixtech.be

- version 0.8.2


-------------------------------------------------------------------
Tue Apr 20 00:00:00 UTC 2004 - guru@unixtech.be

- version 0.8.1


-------------------------------------------------------------------
Sun Feb  8 00:00:00 UTC 2004 - guru@unixtech.be

- version 0.7.0


-------------------------------------------------------------------
Tue Jan  6 00:00:00 UTC 2004 - guru@unixtech.be

- new spec-file