------------------------------------------------------------------- Thu Jun 6 07:29:28 UTC 2024 - Dirk Müller - update to 7.5.3: * Performance improvements for combining data files, especially when measuring line coverage. A few different quadratic behaviors were eliminated. In one extreme case of combining 700+ data files, the time dropped from more than three hours to seven minutes. Thanks for Kraken Tech for funding the fix. * Performance improvements for generating HTML reports, with a side benefit of reducing memory use, closing issue 1791. Thanks to Daniel Diniz for helping to diagnose the problem. * Fix: nested matches of exclude patterns could exclude too much code, as reported in issue 1779. This is now fixed. * Changed: previously, coverage.py would consider a module docstring to be an executable statement if it appeared after line 1 in the file, but not executable if it was the first line. Now module docstrings are never counted as executable statements. This can change coverage.py's count of the number of statements in a file, which can slightly change the coverage percentage reported. * In the HTML report, the filter term and "hide covered" checkbox settings are remembered between viewings, thanks to Daniel Diniz. * Python 3.13.0b1 is supported. * Fix: parsing error handling is improved to ensure bizarre source files are handled gracefully, and to unblock oss-fuzz fuzzing, thanks to Liam DeVoe. Closes issue 1787. ------------------------------------------------------------------- Fri May 10 03:05:12 UTC 2024 - Steve Kowalik - Update to 7.5.1: * Fix: a pragma comment on the continuation lines of a multi-line statement now excludes the statement and its body, the same as if the pragma is on the first line. * Fix: very complex source files could cause a maximum recursion error when creating an HTML report. * HTML report improvements: + Support files (JavaScript and CSS) referenced by the HTML report now have hashes added to their names to ensure updated files are used instead of stale cached copies. + Missing branch coverage explanations that said "the condition was never false" now read "the condition was always true" because it's easier to understand. + Column sort order is remembered better as you move between the index pages. * Added initial support for function and class reporting in the HTML report. * Other HTML report improvements: + There is now a "hide covered" checkbox to filter out 100% files. + The index page is always sorted by one of its columns, with clearer indications of the sorting. + The "previous file" shortcut key didn't work on the index page, but now it does. * The debug output showing which configuration files were tried now shows absolute paths to help diagnose problems where settings aren't taking effect, and is renamed from "attempted_config_files" to the more logical "config_files_attempted." * Fix: in some cases, even with [run] relative_files=True, a data file could be created with absolute path names. When combined with other relative data files, it was random whether the absolute file names would be made relative or not. If they weren't, then a file would be listed twice in reports. * Fix: the last case of a match/case statement had an incorrect message if the branch was missed. It said the pattern never matched, when actually the branch is missed if the last case always matched. * Fix: clicking a line number in the HTML report now positions more accurately. * Fix: the report:format setting was defined as a boolean, but should be a string. * Fix: in some cases, coverage could fail with a RuntimeError: "Set changed size during iteration." * Fix: setting COVERAGE_CORE=sysmon no longer errors on 3.11 and lower. * Fix: the JSON report now includes an explicit format version number. * Fix: the change for multi-line signature exclusions in 7.3.3 broke other forms of nested clauses being excluded properly. * Fix: in the HTML report, selecting code for copying won't select the line numbers also. Thanks, `Robert Harris `_. * Fix: function definitions with multi-line signatures can now be excluded by matching any of the lines. * Fix: XML reports could fail with a TypeError if files had numeric components that were duplicates except for leading zeroes, like file1.py and file001.py. * The coverage annotate command used to announce that it would be removed in a future version. Enough people got in touch to say that they use it, so it will stay. Don't expect it to keep up with other new features though. - Set COVERAGE_CORE, so we no longer need to skip the ctrace tests, it will be handled for us. - Skip two tests that assert PYTHONPATH is empty, which it can't be. ------------------------------------------------------------------- Tue Nov 28 08:53:23 UTC 2023 - Dirk Müller - update to 7.3.2: * The ``coverage lcov`` command ignored the ``[report] exclude_lines`` and ``[report] exclude_also`` settings * Sometimes SQLite will create journal files alongside the coverage.py database files. These are ephemeral, but could be mistakenly included when combining data files. * On Python 3.12+, we now disable SQLite writing journal files, which should be a little faster. * The new 3.12 soft keyword ``type`` is properly bolded in HTML reports. * Removed the "fullcoverage" feature used by CPython to measure the coverage of early-imported standard library modules. ------------------------------------------------------------------- Mon Sep 18 09:20:10 UTC 2023 - Dirk Müller - update to 7.3.1: * The semantics of stars in file patterns has been clarified in the docs. A leading or trailing star matches any number of path components, like a double star would. This is different than the behavior of a star in the middle of a pattern. ------------------------------------------------------------------- Mon Aug 14 16:00:52 UTC 2023 - Matthias Fehring - specfile * fix build on Leap 15 by moving sle15_python_module_pythons macro to the top ------------------------------------------------------------------- Mon Aug 14 06:05:34 UTC 2023 - Arun Persaud - specfile: * require python 3.8 - update to version 7.3.0: * Added a Coverage.collect() context manager to start and stop coverage data collection. * Dropped support for Python 3.7. * Fix: in unusual circumstances, SQLite cannot be set to asynchronous mode. Coverage.py would fail with the error Safety level may not be changed inside a transaction. This is now avoided, closing issue 1646. Thanks to Michael Bell for the detailed bug report. * Docs: examples of configuration files now include separate examples for the different syntaxes: .coveragerc, pyproject.toml, setup.cfg, and tox.ini. * Fix: added nosemgrep comments to our JavaScript code so that semgrep-based SAST security checks won’t raise false alarms about security problems that aren’t problems. * Added a CITATION.cff file, thanks to Ken Schackart. ------------------------------------------------------------------- Thu Aug 10 22:00:16 UTC 2023 - Arun Persaud - specfile: * removed fix-tests.patch, included upstream - update to version 7.2.7: * Fix: reverted a change from 6.4.3 that helped Cython, but also increased the size of data files when using dynamic contexts, as described in the now-fixed issue 1586. The problem is now avoided due to a recent change (issue 1538). Thanks to Anders Kaseorg and David Szotten for persisting with problem reports and detailed diagnoses. * Wheels are now provided for CPython 3.12. - changes from version 7.2.6: * Fix: the lcov command could raise an IndexError exception if a file is translated to Python but then executed under its own name. Jinja2 does this when rendering templates. Fixes issue 1553. * Python 3.12 beta 1 now inlines comprehensions. Previously they were compiled as invisible functions and coverage.py would warn you if they weren’t completely executed. This no longer happens under Python 3.12. * Fix: the coverage debug sys command includes some environment variables in its output. This could have included sensitive data. Those values are now hidden with asterisks, closing issue 1628. ------------------------------------------------------------------- Wed May 10 08:06:33 UTC 2023 - Daniel Garcia - Add fix-tests.patch gh#nedbat/coveragepy@3fdda7d017ff - Update to 7.2.5: * Fix: html_report() could fail with an AttributeError on isatty if run in an unusual environment where sys.stdout had been replaced. This is now fixed. - 7.2.4: * Fix: with relative_files = true, specifying a specific file to include or omit wouldn't work correctly (issue 1604). This is now fixed, with testing help by Marc Gibbons. * Fix: the XML report would have an incorrect element when using relative files and the source option ended with a slash (issue 1541). This is now fixed, thanks to Kevin Brown-Silva. * When the HTML report location is printed to the terminal, it's now a terminal-compatible URL, so that you can click the location to open the HTML file in your browser. Finishes issue 1523 thanks to Ricardo Newbery. * Docs: a new :ref:`Migrating page ` with details about how to migrate between major versions of coverage.py. It currently covers the wildcard changes in 7.x. Thanks, Brian Grohe. - 7.2.3: * Fix: the :ref:`config_run_sigterm` setting was meant to capture data if a process was terminated with a SIGTERM signal, but it didn't always. This was fixed thanks to Lewis Gaul, closing issue 1599. * Performance: HTML reports with context information are now much more compact. File sizes are typically as small as one-third the previous size, but can be dramatically smaller. This closes issue 1584 thanks to Oleh Krehel. * Development dependencies no longer use hashed pins, closing issue 1592. ------------------------------------------------------------------- Fri Apr 21 12:23:47 UTC 2023 - Dirk Müller - add sle15_python_module_pythons (jsc#PED-68) ------------------------------------------------------------------- Thu Apr 13 22:40:41 UTC 2023 - Matej Cepl - Make calling of %{sle15modernpython} optional. ------------------------------------------------------------------- Sun Mar 26 19:13:56 UTC 2023 - Dirk Müller - update to 7.2.2: * Fix: if a virtualenv was created inside a source directory, and a sourced package was installed inside the virtualenv, then all of the third-party packages inside the virtualenv would be measured. This was incorrect, but has now been fixed: only the specified packages will be measured. * Fix: the ``coverage lcov`` command could create a .lcov file with incorrect LF (lines found) and LH (lines hit) totals * Fix: the ``coverage xml`` command on Windows could create a .xml file with duplicate ```` elements. ------------------------------------------------------------------- Tue Mar 14 22:26:17 UTC 2023 - Dirk Müller - update to 7.2.1: * Fix: the PyPI page had broken links to documentation pages, but no longer does * Fix: public members of the coverage module are now properly indicated so that mypy will find them * Added a new setting ``[report] exclude_also`` to let you add more exclusions without overwriting the defaults. * Added a :meth:`.CoverageData.purge_files` method to remove recorded data for a particular file. * Fix: when reporting commands fail, they will no longer congratulate themselves with messages like "Wrote XML report to file.xml" before spewing a traceback about their failure. * Fix: arguments in the public API that name file paths now accept pathlib.Path objects. This includes the ``data_file`` and ``config_file`` arguments to the Coverage constructor and the ``basename`` argument to CoverageData. * Fix: In some embedded environments, an IndexError could occur on stop() when the originating thread exits before completion. This is now fixed, thanks to * Added a ``py.typed`` file to announce our type-hintedness. ------------------------------------------------------------------- Sat Jan 28 13:38:32 UTC 2023 - Dirk Müller - update to 7.1.0: * Added: the debug output file can now be specified with ``[run] debug_file`` in the configuration file. Closes `issue 1319`_. * Performance: fixed a slowdown with dynamic contexts that's been around since 6.4.3. * Typing: all product and test code has type annotations. * Fix: On Python 3.7, a file with type annotations but no ``from __future__ import annotations`` would be missing statements in the coverage report. This is now fixed, closing `issue 1524`_. * Performance: an internal cache of file names was accidentally disabled, resulting in sometimes drastic reductions in performance. This is now fixed, closing `issue 1527`_. ------------------------------------------------------------------- Wed Jan 4 16:20:35 UTC 2023 - Dirk Müller - update to 7.0.3: * Fix: when using pytest-cov or pytest-xdist, or perhaps both, the combining step could fail with ``assert row is not None`` using 7.0.2. ------------------------------------------------------------------- Mon Dec 26 12:21:27 UTC 2022 - Ben Greiner - Update to 7.0.1 * When checking if a file mapping resolved to a file that exists, we weren’t considering files in .whl files. This is now fixed, closing issue 1511. * File pattern rules were too strict, forbidding plus signs and curly braces in directory and file names. This is now fixed, closing issue 1513. * Unusual Unicode or control characters in source files could prevent reporting. This is now fixed, closing issue 1512. * The PyPy wheel now installs on PyPy 3.7, 3.8, and 3.9, closing issue 1510. - Release 7.0.0 * Changes to file pattern matching, which might require updating your configuration: - Previously, * would incorrectly match directory separators, making precise matching difficult. This is now fixed, closing issue 1407. - Now ** matches any number of nested directories, including none. * Improvements to combining data files when using the [run] relative_files setting, which might require updating your configuration: - During coverage combine, relative file paths are implicitly combined without needing a [paths] configuration setting. This also fixed issue 991. - A [paths] setting like */foo will now match foo/bar.py so that relative file paths can be combined more easily. - The [run] relative_files setting is properly interpreted in more places, fixing issue 1280. * When remapping file paths with [paths], a path will be remapped only if the resulting path exists. The documentation has long said the prefix had to exist, but it was never enforced. This fixes issue 608, improves issue 649, and closes issue 757. * Reporting operations now implicitly use the [paths] setting to remap file paths within a single data file. Combining multiple files still requires the coverage combine step, but this simplifies some single-file situations. Closes issue 1212 and issue 713. * The coverage report command now has a --format= option. The original style is now --format=text, and is the default. - Using --format=markdown will write the table in Markdown format, thanks to Steve Oswald, closing issue 1418. - Using --format=total will write a single total number to the output. This can be useful for making badges or writing status updates. * Combining data files with coverage combine now hashes the data files to skip files that add no new information. This can reduce the time needed. Many details affect the speed-up, but for coverage.py’s own test suite, combining is about 40% faster. Closes issue 1483. * When searching for completely un-executed files, coverage.py uses the presence of __init__.py files to determine which directories have source that could have been imported. However, implicit namespace packages don’t require __init__.py. A new setting [report] include_namespace_packages tells coverage.py to consider these directories during reporting. Thanks to Felix Horvat for the contribution. Closes issue 1383 and issue 1024. * Fixed environment variable expansion in pyproject.toml files. It was overly broad, causing errors outside of coverage.py settings, as described in issue 1481 and issue 1345. This is now fixed, but in rare cases will require changing your pyproject.toml to quote non-string values that use environment substitution. * An empty file has a coverage total of 100%, but used to fail with --fail-under. This has been fixed, closing issue 1470. * The text report table no longer writes out two separator lines if there are no files listed in the table. One is plenty. * Fixed a mis-measurement of a strange use of wildcard alternatives in match/case statements, closing issue 1421. * Fixed internal logic that prevented coverage.py from running on implementations other than CPython or PyPy (issue 1474). * The deprecated [run] note setting has been completely removed. - Make fit for devel:languages:python:backports * Explicit usage of python3 in specfile ------------------------------------------------------------------- Mon Oct 3 15:48:41 UTC 2022 - Dirk Müller - update to 6.5.0: - The JSON report now includes details of which branches were taken, and which are missing for each file. Thanks, Christoph Blessing (`pull 1438`_). Closes `issue 1425`_. - Starting with coverage.py 6.2, ``class`` statements were marked as a branch. This wasn't right, and has been reverted, fixing `issue 1449`_. Note this will very slightly reduce your coverage total if you are measuring branch coverage. - Packaging is now compliant with `PEP 517`_, closing `issue 1395`_. - A new debug option ``--debug=pathmap`` shows details of the remapping of paths that happens during combine due to the ``[paths]`` setting. - Fix an internal problem with caching of invalid Python parsing. Found by OSS-Fuzz, fixing their `bug 50381`_. .. _bug 50381: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=50381 .. _PEP 517: https://peps.python.org/pep-0517/ .. _issue 1395: https://github.com/nedbat/coveragepy/issues/1395 .. _issue 1425: https://github.com/nedbat/coveragepy/issues/1425 .. _pull 1438: https://github.com/nedbat/coveragepy/pull/1438 .. _issue 1449: https://github.com/nedbat/coveragepy/issues/1449 ------------------------------------------------------------------- Sat Sep 10 15:31:21 UTC 2022 - Arun Persaud - update to version 6.4.4: * Wheels are now provided for Python 3.11. - changes from version 6.4.3: * Fix a failure when combining data files if the file names contained glob-like patterns (pull 1405). Thanks, Michael Krebs and Benjamin Schubert. * Fix a messaging failure when combining Windows data files on a different drive than the current directory. (pull 1430, fixing issue 1428). Thanks, Lorenzo Micò. * Fix path calculations when running in the root directory, as you might do in a Docker container: pull 1403, thanks Arthur Rio. * Filtering in the HTML report wouldn’t work when reloading the index page. This is now fixed (pull 1413). Thanks, Marc Legendre. * Fix a problem with Cython code measurement (pull 1347, fixing issue 972). Thanks, Matus Valo. - changes from version 6.4.2: * Updated for a small change in Python 3.11.0 beta 4: modules now start with a line with line number 0, which is ignored. This line cannnot be executed, so coverage totals were thrown off. This line is now ignored by coverage.py, but this also means that truly empty modules (like __init__.py) have no lines in them, rather than one phantom line. Fixes issue 1419. * Internal debugging data added to sys.modules is now an actual module, to avoid confusing code that examines everything in sys.modules. Thanks, Yilei Yang (pull 1399). ------------------------------------------------------------------- Sat Jul 9 14:27:53 UTC 2022 - Arun Persaud - update to version 6.4.1: * Greatly improved performance on PyPy, and other environments that need the pure Python trace function. Thanks, Carl Friedrich Bolz-Tereick (pull 1381 and pull 1388). Slightly improved performance when using the C trace function, as most environments do. Closes issue 1339. * The conditions for using tomllib from the standard library have been made more precise, so that 3.11 alphas will continue to work. Closes issue 1390. - changes from version 6.4: * A new setting, [run] sigterm, controls whether a SIGTERM signal handler is used. In 6.3, the signal handler was always installed, to capture data at unusual process ends. Unfortunately, this introduced other problems (see issue 1310). Now the signal handler is only used if you opt-in by setting [run] sigterm = true. * Small changes to the HTML report: + Added links to next and previous file, and more keyboard shortcuts: [ and ] for next file and previous file; u for up to the index; and ? to open/close the help panel. Thanks, J. M. F. Tsang. + The timestamp and version are displayed at the top of the report. Thanks, Ammar Askar. Closes issue 1351. * A new debug option debug=sqldata adds more detail to debug=sql, logging all the data being written to the database. * Previously, running coverage report (or any of the reporting commands) in an empty directory would create a .coverage data file. Now they do not, fixing issue 1328. * On Python 3.11, the [toml] extra no longer installs tomli, instead using tomllib from the standard library. Thanks Shantanu. * In-memory CoverageData objects now properly update(), closing issue 1323. - changes from version 6.3.3 : * Fix: Coverage.py now builds successfully on CPython 3.11 (3.11.0b1) again. Closes issue 1367. Some results for generators may have changed. ------------------------------------------------------------------- Mon Mar 14 10:47:55 UTC 2022 - John Paul Adrian Glaubitz - Update in SLE-15 (bsc#1195916, bsc#1196696, jsc#PM-3356, jsc#SLE-23972) ------------------------------------------------------------------- Sat Mar 12 05:47:59 UTC 2022 - Arun Persaud - specfile: * update copyright year * require python-base >= 3.7 - update to version 6.3.2: * Fix: adapt to pypy3.9’s decorator tracing behavior. It now traces function decorators like CPython 3.8: both the @-line and the def-line are traced. Fixes issue 1326. * Debug: added pybehave to the list of Diagnostics: coverage debug and --debug options. * Fix: show an intelligible error message if --concurrency=multiprocessing is used without a configuration file. Closes issue 1320. - changes from version 6.3.1: * Fix: deadlocks could occur when terminating processes. Some of these deadlocks (described in issue 1310) are now fixed. * Fix: a signal handler was being set from multiple threads, causing an error: “ValueError: signal only works in main thread”. This is now fixed, closing issue 1312. * Fix: --precision on the command-line was being ignored while considering --fail-under. This is now fixed, thanks to Marcelo Trylesinski. * Fix: releases no longer provide 3.11.0-alpha wheels. Coverage.py uses CPython internal fields which are moving during the alpha phase. Fixes issue 1316. - changes from version 6.3: * Feature: Added the lcov command to generate reports in LCOV format. Thanks, Bradley Burns. Closes issues 587 and 626. * Feature: the coverage data file can now be specified on the command line with the --data-file option in any command that reads or writes data. This is in addition to the existing COVERAGE_FILE environment variable. Closes issue 624. Thanks, Nikita Bloshchanevich. * Feature: coverage measurement data will now be written when a SIGTERM signal is received by the process. This includes Process.terminate, and other ways to terminate a process. Currently this is only on Linux and Mac; Windows is not supported. Fixes issue 1307. * Dropped support for Python 3.6, which reached end-of-life on 2021-12-23. * Updated Python 3.11 support to 3.11.0a4, fixing issue 1294. * Fix: the coverage data file is now created in a more robust way, to avoid problems when multiple processes are trying to write data at once. Fixes issues 1303 and 883. * Fix: a .gitignore file will only be written into the HTML report output directory if the directory is empty. This should prevent certain unfortunate accidents of writing the file where it is not wanted. * Releases now have MacOS arm64 wheels for Apple Silicon, fixing issue 1288. ------------------------------------------------------------------- Thu Dec 9 17:16:23 UTC 2021 - Ben Greiner - Update to version 6.2 * Feature: Now the --concurrency setting can now have a list of values, so that threads and another lightweight threading package can be measured together, such as --concurrency=gevent,thread. Closes issue 1012 and issue 1082. * Fix: A module specified as the source setting is imported during startup, before the user program imports it. This could cause problems if the rest of the program isn't ready yet. For example, issue 1203 describes a Django setting that is accessed before settings have been configured. Now the early import is wrapped in a try/except so errors then don't stop execution. * Fix: A colon in a decorator expression would cause an exclusion to end too early, preventing the exclusion of the decorated function. This is now fixed. * Fix: The HTML report now will not overwrite a .gitignore file that already exists in the HTML output directory (follow-on for issue 1244). * API: The exceptions raised by Coverage.py have been specialized, to provide finer-grained catching of exceptions by third-party code. * API: Using suffix=False when constructing a Coverage object with multiprocessing wouldn't suppress the data file suffix (issue 989). This is now fixed. * Debug: The coverage debug data command will now sniff out combinable data files, and report on all of them. * Debug: The coverage debug command used to accept a number of topics at a time, and show all of them, though this was never documented. This no longer works, to allow for command-line options in the future. - Release notes for 6.1.2 * Python 3.11 is supported (tested with 3.11.0a2). One still-open issue has to do with exits through with-statements. * Fix: When remapping file paths through the [paths] setting while combining, the [run] relative_files setting was ignored, resulting in absolute paths for remapped file names (issue 1147). This is now fixed. * Fix: Complex conditionals over excluded lines could have incorrectly reported a missing branch (issue 1271). This is now fixed. * Fix: More exceptions are now handled when trying to parse source files for reporting. Problems that used to terminate coverage.py can now be handled with [report] ignore_errors. This helps with plugins failing to read files (django_coverage_plugin issue 78). * Fix: Removed another vestige of jQuery from the source tarball (issue 840). * Fix: Added a default value for a new-to-6.x argument of an internal class. This unsupported class is being used by coveralls (issue 1273). Although I'd rather not "fix" unsupported interfaces, it's actually nicer with a default value. - Release notes for 6.1.1 * Fix: The sticky header on the HTML report didn't work unless you had branch coverage enabled. This is now fixed: the sticky header works for everyone. (Do people still use coverage without branch measurement!? j/k) * Fix: When using explicitly declared namespace packages, the "already imported a file that will be measured" warning would be issued (issue 888). This is now fixed. - Release notes for 6.1 * Deprecated: The annotate command and the Coverage.annotate function will be removed in a future version, unless people let me know that they are using it. Instead, the html command gives better-looking (and more accurate) output, and the report -m command will tell you line numbers of missing lines. Please get in touch if you have a reason to use annotate over those better options: ned@nedbatchelder.com. * Feature: Coverage now sets an environment variable, COVERAGE_RUN when running your code with the coverage run command. The value is not important, and may change in the future. Closes issue 553. * Feature: The HTML report pages for Python source files now have a sticky header so the file name and controls are always visible. * Feature: The xml and json commands now describe what they wrote where. * Feature: The html, combine, xml, and json commands all accept a -q/--quiet option to suppress the messages they write to stdout about what they are doing (issue 1254). * Feature: The html command writes a .gitignore file into the HTML output directory, to prevent the report from being committed to git. If you want to commit it, you will need to delete that file. Closes issue 1244. * Feature: Added support for PyPy 3.8. * Fix: More generated code is now excluded from measurement. Code such as attrs boilerplate, or doctest code, was being measured though the synthetic line numbers meant they were never reported. Once Cython was involved though, the generated .so files were parsed as Python, raising syntax errors, as reported in issue 1160. This is now fixed. * Fix: When sorting human-readable names, numeric components are sorted correctly: file10.py will appear after file9.py. This applies to file names, module names, environment variables, and test contexts. * Performance: Branch coverage measurement is faster, though you might only notice on code that is executed many times, such as long-running loops. * Build: jQuery is no longer used or vendored (issue 840 and issue 1118). Huge thanks to Nils Kattenbeck (septatrix) for the conversion to vanilla JavaScript in pull request 1248. - Release notes for 6.0.2 * Namespace packages being measured weren't properly handled by the new code that ignores third-party packages. If the namespace package was installed, it was ignored as a third-party package. That problem (issue 1231) is now fixed. * Packages named as "source packages" (with source, or source_pkgs, or pytest-cov's --cov) might have been only partially measured. Their top-level statements could be marked as unexecuted, because they were imported by coverage.py before measurement began (issue 1232). This is now fixed, but the package will be imported twice, once by coverage.py, then again by your test suite. This could cause problems if importing the package has side effects. * The :meth:`.CoverageData.contexts_by_lineno` method was documented to return a dict, but was returning a defaultdict. Now it returns a plain dict. It also no longer returns negative numbered keys. - Release notes for 6.0.1 * In 6.0, the coverage.py exceptions moved from coverage.misc to coverage.exceptions. These exceptions are not part of the public supported API, CoverageException is. But a number of other third-party packages were importing the exceptions from coverage.misc, so they are now available from there again (issue 1226). * Changed an internal detail of how tomli is imported, so that tomli can use coverage.py for their own test suite (issue 1228). * Defend against an obscure possibility under code obfuscation, where a function can have an argument called "self", but no local named "self" (pull request 1210). Thanks, Ben Carlsson. - Release notes for 6.0 * The coverage html command now prints a message indicating where the HTML report was written. Fixes issue 1195. * The coverage combine command now prints messages indicating each data file being combined. Fixes issue 1105. * The HTML report now includes a sentence about skipped files due to skip_covered or skip_empty settings. Fixes issue 1163. * Unrecognized options in the configuration file are no longer errors. They are now warnings, to ease the use of coverage across versions. Fixes issue 1035. * Fix handling of exceptions through context managers in Python 3.10. A missing exception is no longer considered a missing branch from the with statement. Fixes issue 1205. * Fix another rarer instance of "Error binding parameter 0 - probably unsupported type." (issue 1010). * Creating a directory for the coverage data file now is safer against conflicts when two coverage runs happen simultaneously (pull 1220). Thanks, Clément Pit-Claudel. - Release notes for Version 6.0b1 * Dropped support for Python 2.7, PyPy 2, and Python 3.5. * Added support for the Python 3.10 match/case syntax. * Data collection is now thread-safe. There may have been rare instances of exceptions raised in multi-threaded programs. * Plugins (like the Django coverage plugin) were generating "Already imported a file that will be measured" warnings about Django itself. These have been fixed, closing issue 1150. * Warnings generated by coverage.py are now real Python warnings. * Using --fail-under=100 with coverage near 100% could result in the self-contradictory message total of 100 is less than fail-under=100. This bug (issue 1168) is now fixed. * The COVERAGE_DEBUG_FILE environment variable now accepts stdout and stderr to write to those destinations. * TOML parsing now uses the tomli library. * Some minor changes to usually invisible details of the HTML report: * Use a modern hash algorithm when fingerprinting, for high-security environments (issue 1189). When generating the HTML report, we save the hash of the data, to avoid regenerating an unchanged HTML page. We used to use MD5 to generate the hash, and now use SHA-3-256. This was never a security concern, but security scanners would notice the MD5 algorithm and raise a false alarm. * Change how report file names are generated, to avoid leading underscores (issue 1167), to avoid rare file name collisions (issue 584), and to avoid file names becoming too long (issue 580). - Drop patches * 0001-make-data-collection-operations-thread-safe.patch * change__file__report-dir.patch * traced_file_absolute.patch ------------------------------------------------------------------- Wed May 12 09:29:03 UTC 2021 - Matej Cepl - Add change__file__report-dir.patch to fix another issue repored in gh#nedbat/coveragepy#1161. ------------------------------------------------------------------- Tue May 11 10:44:16 UTC 2021 - Antonio Larrosa - Add a patch from upstream (slightly rebased) to make data collection operations thread safe: * 0001-make-data-collection-operations-thread-safe.patch ------------------------------------------------------------------- Sun May 9 22:27:19 UTC 2021 - Matej Cepl - Add traced_file_absolute.patch to fix gh#nedbat/coveragepy#1161. ------------------------------------------------------------------- Sat May 8 18:47:01 UTC 2021 - Matej Cepl - Switch off test_debug_trace started to avoid failure (gh#nedbat/coveragepy#1161). ------------------------------------------------------------------- Sat May 8 14:15:04 UTC 2021 - Matej Cepl - Update to 5.5: - coverage combine has a new option, --keep to keep the original data files after combining them. The default is still to delete the files after they have been combined. This was requested in issue 1108 and implemented in pull request 1110. Thanks, Éric Larivière. - When reporting missing branches in coverage report, branches aren’t reported that jump to missing lines. This adds to the long-standing behavior of not reporting branches from missing lines. Now branches are only reported if both the source and destination lines are executed. Closes both issue 1065 and issue 955. - Minor improvements to the HTML report: - The state of the line visibility selector buttons is saved in local storage so you don’t have to fiddle with them so often, fixing issue 1123. - It has a little more room for line numbers so that 4-digit numbers work well, fixing issue 1124. - Improved the error message when combining line and branch data, so that users will be more likely to understand what’s happening, closing issue 803. ------------------------------------------------------------------- Mon Feb 1 20:58:07 UTC 2021 - Dirk Müller - update to 5.4: - The text report produced by ``coverage report`` now always outputs a TOTAL line, even if only one Python file is reported. This makes regex parsing of the output easier. Thanks, Judson Neer. This had been requested a number of times - The ``skip_covered`` and ``skip_empty`` settings in the configuration file can now be specified in the ``[html]`` section, so that text reports and HTML reports can use separate settings. The HTML report will still use the ``[report]`` settings if there isn't a value in the ``[html]`` section. - Combining files on Windows across drives how works properly - Fix an obscure warning from deep in the _decimal module, as reported in `issue 1084`_. - Update to support Python 3.10 alphas in progress, including `PEP 626: Precise line numbers for debugging and other tools `_. ------------------------------------------------------------------- Sun Dec 20 09:24:09 UTC 2020 - Dirk Müller - update to 5.3.1: - When using ``--source`` on a large source tree, v5.x was slower than previous versions. This performance regression is now fixed, closing `issue 1037`_. - Mysterious SQLite errors can happen on PyPy, as reported in `issue 1010`_. An immediate retry seems to fix the problem, although it is an unsatisfying solution. - The HTML report now saves the sort order in a more widely supported way, fixing `issue 986`_. Thanks, Sebastián Ramírez (`pull request 1066`_). - The HTML report pages now have a :ref:`Sleepy Snake ` favicon. - Wheels are now provided for manylinux2010, and for PyPy3 (pp36 and pp37). ------------------------------------------------------------------- Thu Dec 10 18:42:00 UTC 2020 - Matej Cepl - Fix alternatives ------------------------------------------------------------------- Wed Dec 2 23:04:31 UTC 2020 - Benjamin Greiner - Support multiple python3 flavors gh#openSUSE/python-rpm-macros#66 * redefine python3_only * fix pytest_arch local bin path ------------------------------------------------------------------- Wed Sep 30 11:09:09 UTC 2020 - Tomáš Chvátal - Update to 5.3 release: * 5 series redesigned on top of sql database instead of file ------------------------------------------------------------------- Sat Mar 21 15:01:00 UTC 2020 - Dirk Mueller - fix build for older distros by buildrequiring a new-enough pytest ------------------------------------------------------------------- Fri Sep 13 10:39:23 UTC 2019 - Tomáš Chvátal - Update to 4.5.4: * Multiprocessing support in Python 3.8 was broken, but is now fixed ------------------------------------------------------------------- Mon Mar 11 10:03:32 UTC 2019 - Tomáš Chvátal - Update to 4.5.3: * Only packaging metadata changes. - Run fdupes ------------------------------------------------------------------- Tue Jan 1 13:38:34 UTC 2019 - Michael Ströder - update to version 4.5.2: * Namespace packages are supported on Python 3.7 * Python 3.8 (as of today!) passes all tests ------------------------------------------------------------------- Tue Jul 17 13:30:37 UTC 2018 - tchvatal@suse.com - Bumpy the URL to point to github rather than to docs ------------------------------------------------------------------- Sun Feb 18 17:12:53 UTC 2018 - arun@gmx.de - update to version 4.5.1: * Now that 4.5 properly separated the [run] omit and [report] omit settings, an old bug has become apparent. If you specified a package name for [run] source, then omit patterns weren’t matched inside that package. This bug (issue 638) is now fixed. * On Python 3.7, reporting about a decorated function with no body other than a docstring would crash coverage.py with an IndexError (issue 640). This is now fixed. * Configurer plugins are now reported in the output of --debug=sys. ------------------------------------------------------------------- Sat Feb 10 17:25:15 UTC 2018 - arun@gmx.de - specfile: * update copyright year - update to version 4.5: * A new kind of plugin is supported: configurators are invoked at start-up to allow more complex configuration than the .coveragerc file can easily do. See Plug-in classes for details. This solves the complex configuration problem described in issue 563. * The fail_under option can now be a float. Note that you must specify the [report] precision configuration option for the fractional part to be used. Thanks to Lars Hupfeldt Nielsen for help with the implementation. Fixes issue 631. * The include and omit options can be specified for both the [run] and [report] phases of execution. 4.4.2 introduced some incorrect interactions between those phases, where the options for one were confused for the other. This is now corrected, fixing issue 621 and issue 622. Thanks to Daniel Hahler for seeing more clearly than I could. * The coverage combine command used to always overwrite the data file, even when no data had been read from apparently combinable files. Now, an error is raised if we thought there were files to combine, but in fact none of them could be used. Fixes issue 629. * The coverage combine command could get confused about path separators when combining data collected on Windows with data collected on Linux, as described in issue 618. This is now fixed: the result path always uses the path separator specified in the [paths] result. * On Windows, the HTML report could fail when source trees are deeply nested, due to attempting to create HTML filenames longer than the 250-character maximum. Now filenames will never get much larger than 200 characters, fixing issue 627. Thanks to Alex Sandro for helping with the fix. ------------------------------------------------------------------- Thu Nov 9 19:10:43 UTC 2017 - jmatejek@suse.com - test presence of python2 (not just if it is skipped; two different things now, unfortunately) ------------------------------------------------------------------- Mon Nov 6 16:55:45 UTC 2017 - arun@gmx.de - update to version 4.4.2: * Support for Python 3.7. In some cases, class and module docstrings are no longer counted in statement totals, which could slightly change your total results. * Specifying both --source and --include no longer silently ignores the include setting, instead it displays a warning. Thanks, Loïc Dachary. Closes issue 265 and issue 101. * Fixed a race condition when saving data and multiple threads are tracing (issue 581). It could produce a “dictionary changed size during iteration” RuntimeError. I believe this mostly but not entirely fixes the race condition. A true fix would likely be too expensive. Thanks, Peter Baughman for the debugging, and Olivier Grisel for the fix with tests. * Configuration values which are file paths will now apply tilde-expansion, closing issue 589. * Now secondary config files like tox.ini and setup.cfg can be specified explicitly, and prefixed sections like [coverage:run] will be read. Fixes issue 588. * Be more flexible about the command name displayed by help, fixing issue 600. Thanks, Ben Finney. ------------------------------------------------------------------- Wed Oct 4 15:47:22 UTC 2017 - arun@gmx.de - update to version 4.4.1: * No code changes: just corrected packaging for Python 2.7 Linux wheels. - changes from version 4.4: * Reports could produce the wrong file names for packages, reporting pkg.py instead of the correct pkg/__init__.py. This is now fixed. Thanks, Dirk Thomas. * XML reports could produce and lines that together didn’t specify a valid source file path. This is now fixed. (issue 526) * Namespace packages are no longer warned as having no code. (issue 572) * Code that uses sys.settrace(sys.gettrace()) in a file that wasn’t being coverage-measured would prevent correct coverage measurement in following code. An example of this was running doctests programmatically. This is now fixed. (issue 575) * Errors printed by the coverage command now go to stderr instead of stdout. * Running coverage xml in a directory named with non-ASCII characters would fail under Python 2. This is now fixed. (issue 573) - changes from version 4.4b1: * Some warnings can now be individually disabled. Warnings that can be disabled have a short name appended. The [run] disable_warnings setting takes a list of these warning names to disable. Closes both issue 96 and issue 355. * The XML report now includes attributes from version 4 of the Cobertura XML format, fixing issue 570. * In previous versions, calling a method that used collected data would prevent further collection. For example, save(), report(), html_report(), and others would all stop collection. An explicit start() was needed to get it going again. This is no longer true. Now you can use the collected data and also continue measurement. Both issue 79 and issue 448 described this problem, and have been fixed. * Plugins can now find unexecuted files if they choose, by implementing the find_executable_files method. Thanks, Emil Madsen. * Minimal IronPython support. You should be able to run IronPython programs under coverage run, though you will still have to do the reporting phase with CPython. * Coverage.py has long had a special hack to support CPython’s need to measure the coverage of the standard library tests. This code was not installed by kitted versions of coverage.py. Now it is. ------------------------------------------------------------------- Fri Aug 11 15:25:50 UTC 2017 - toddrme2178@gmail.com - Handle cases where python2 is disabled (needed for SLE backports compatibility) ------------------------------------------------------------------- Wed Mar 29 13:53:04 UTC 2017 - jmatejek@suse.com - uninstall alternatives in %postun ------------------------------------------------------------------- Mon Mar 13 17:18:44 UTC 2017 - jmatejek@suse.com - update for singlespec - update to 4.3.4: - Using the --skip-covered option on an HTML report with 100% coverage would cause a “No data to report” error, as reported in issue 549. This is now fixed; thanks, Loïc Dachary. - If-statements can be optimized away during compilation, for example, if 0: or if __debug__:. Coverage.py had problems properly understanding these statements which existed in the source, but not in the compiled bytecode. This problem, reported in issue 522, is now fixed. - If you specified --source as a directory, then coverage.py would look for importable Python files in that directory, and could identify ones that had never been executed at all. But if you specified it as a package name, that detection wasn’t performed. Now it is, closing issue 426. Thanks to Loïc Dachary for the fix. - If you started and stopped coverage measurement thousands of times in your process, you could crash Python with a “Fatal Python error: deallocating None” error. This is now fixed. Thanks to Alex Groce for the bug report. - On PyPy, measuring coverage in subprocesses could produce a warning: “Trace function changed, measurement is likely wrong: None”. This was spurious, and has been suppressed. - Previously, coverage.py couldn’t start on Jython, due to that implementation missing the multiprocessing module (issue 551). This problem has now been fixed. Also, issue 322 about not being able to invoke coverage conveniently, seems much better: jython -m coverage run myprog.py works properly. - Let’s say you ran the HTML report over and over again in the same output directory, with --skip-covered. And imagine due to your heroic test-writing efforts, a file just acheived the goal of 100% coverage. With coverage.py 4.3, the old HTML file with the less-than-100% coverage would be left behind. This file is now properly deleted. ------------------------------------------------------------------- Sat Jan 14 19:28:37 UTC 2017 - hpj@urpla.net - update to Version 4.3.1 — 2016-12-28: - Some environments couldn’t install 4.3, as described in issue 540. This is now fixed. - The check for conflicting --source and --include was too simple in a few different ways, breaking a few perfectly reasonable use cases, described in issue 541. The check has been reverted while we re-think the fix for issue 265. - update to Version 4.3 — 2016-12-27: Special thanks to Loïc Dachary, who took an extraordinary interest in coverage.py and contributed a number of improvements in this release. - The HTML report now supports a --skip-covered option like the other reporting commands. Thanks, Loïc Dachary for the implementation, closing issue 433. - Subprocesses that are measured with automatic subprocess measurement used to read in any pre-existing data file. This meant data would be incorrectly carried forward from run to run. Now those files are not read, so each subprocess only writes its own data. Fixes issue 510. - Coverage.py wouldn’t execute sys.excepthook when an exception happened in your program. Now it does, thanks to Andrew Hoos. Closes issue 535. - The coverage combine command will now fail if there are no data files to combine. The combine changes in 4.2 meant that multiple combines could lose data, leaving you with an empty .coverage data file. Fixes issues issue 525, issue 412, issue 516, and probably issue 511. - The branch coverage issues described in issue 493, issue 496, and issue 502 are now fixed, thanks to Loïc Dachary. - Options can now be read from a tox.ini file, if any. Like setup.cfg, sections are prefixed with “coverage:”, so [run] options will be read from the [coverage:run] section of tox.ini. Implements part of issue 519. Thanks, Stephen Finucane. - Specifying both --source and --include no longer silently ignores the include setting, instead it fails with a message. Thanks, Nathan Land and Loïc Dachary. Closes issue 265. - Coverage.py can now search .pex files for source, just as it can .zip and .egg. Thanks, Peter Ebden. ------------------------------------------------------------------- Tue Nov 15 10:06:32 UTC 2016 - dmueller@suse.com - update to 4.2: - Since ``concurrency=multiprocessing`` uses subprocesses, options specified on the coverage.py command line will not be communicated down to them. Only options in the configuration file will apply to the subprocesses. Previously, the options didn't apply to the subprocesses, but there was no indication. Now it is an error to use ``--concurrency=multiprocessing`` and other run-affecting options on the command line. This prevents failures like those reported in `issue 495`_. - Filtering the HTML report is now faster, thanks to Ville Skyttä. ------------------------------------------------------------------- Mon Dec 28 12:16:34 UTC 2015 - marec@detebe.org - update to 4.0.3: - Fixed a mysterious problem that manifested in different ways: sometimes hanging the process (`issue 420`_), sometimes making database connections fail (`issue 445`_). - The XML report now has correct ```` elements when using a ``--source=`` option somewhere besides the current directory. This fixes `issue 439`_. Thanks, Arcady Ivanov. - Fixed an unusual edge case of detecting source encodings, described in `issue 443`_. - Help messages that mention the command to use now properly use the actual command name, which might be different than "coverage". Thanks to Ben Finney, this closes `issue 438`_. ------------------------------------------------------------------- Sat Oct 31 07:50:25 UTC 2015 - dmueller@suse.com - add LICENSE.txt ------------------------------------------------------------------- Fri Oct 16 09:23:35 UTC 2015 - bgeuken@suse.com - Pre require coreutils. This package is needed for the rm call in the pre section. Subprocess failed. Error: RPM failed: /var/tmp/rpm-tmp.gONanE: line 3: rm: command not found ------------------------------------------------------------------- Wed Oct 7 05:03:03 UTC 2015 - arun@gmx.de - specfile: * updated license * updated update-alternatives * README.txt -> README.rst - update to version 4.0: (long list, see http://coverage.readthedocs.org/en/latest/changes.html) ------------------------------------------------------------------- Fri Jul 24 21:02:54 UTC 2015 - seife+obs@b1-systems.com - fix rhel deps by depending on /usr/sbin/update-alternatives ------------------------------------------------------------------- Sun Nov 09 23:03:00 UTC 2014 - Led - fix bashism in pre script ------------------------------------------------------------------- Thu May 8 11:37:39 UTC 2014 - toddrme2178@gmail.com - update to 3.7.1: - Improved the speed of HTML report generation by about 20%. - Fixed the mechanism for finding OS-installed static files for the HTML report so that it will actually find OS-installed static files. ------------------------------------------------------------------- Thu Oct 24 13:40:56 UTC 2013 - speilicke@suse.com - Require python-setuptools instead of distribute (upstreams merged) ------------------------------------------------------------------- Mon Oct 21 12:17:02 UTC 2013 - dmueller@suse.com - update to 3.7: * Added the ``--debug`` switch to ``coverage run``. It accepts a list of options indicating the type of internal activity to log to stderr. * Running code with ``coverage run -m`` now behaves more like Python does, setting sys.path properly, which fixes `issue 207`_ and `issue 242`_. * Coverage can now run .pyc files directly, closing `issue 264`_. Over 15 other bugfixes, see included CHANGELOG ------------------------------------------------------------------- Wed May 15 14:50:46 UTC 2013 - speilicke@suse.com - Fix update-alternatives and support upgrade from previous versions ------------------------------------------------------------------- Fri May 3 09:15:27 UTC 2013 - speilicke@suse.com - Apply update-alternatives for binaries and man-pages - Drop buildrequires on python-xml, I don't see it being used ------------------------------------------------------------------- Mon Apr 29 11:55:07 UTC 2013 - dmueller@suse.com - update to 3.6: * Fix Nose support * Add --fail-under * Over 20 bug fixes, for details see included CHANGELOG ------------------------------------------------------------------- Tue Nov 20 18:15:53 UTC 2012 - saschpe@suse.de - Update to version 3.5.3: + Line numbers in the HTML report line up better with the source lines, fixing issue 197 + When specifying a directory as the source= option, the directory itself no longer needs to have a __init__.py file, though its subdirectories do, to be considered as source files. + Files encoded as UTF-8 with a BOM are now properly handled, fixing issue 179_. + Fixed more cases of non-Python files being reported as Python source, and then not being able to parse them as Python. Closes issue 82 (again). + Fixed memory leaks under Python 3, thanks, Brett Cannon. Closes issue 147_. + Optimized .pyo files may not have been handled correctly, issue 195_. + Certain unusually named file paths could have been mangled during reporting, issue 194_. + Try to do a better job of the impossible task of detecting when we can't build the C extension, fixing issue 183_. + Testing is now done with tox - Changes from version 3.5.2: + No changes since 3.5.2.b1 - Changes from version 3.5.2b1 + The HTML report has slightly tweaked controls: the buttons at the top of the page are color-coded to the source lines they affect. + Custom CSS can be applied to the HTML report by specifying a CSS file as the extra_css configuration value in the [html] section. + Source files with custom encodings declared in a comment at the top are now properly handled during reporting on Python 2. Python 3 always handled them properly. This fixes issue 157_. + Backup files left behind by editors are no longer collected by the source= option, fixing issue 168_. + If a file doesn't parse properly as Python, we don't report it as an error if the filename seems like maybe it wasn't meant to be Python. This is a pragmatic fix for issue 82_. + The -m switch on coverage report, which includes missing line numbers in the summary report, can now be specifed as show_missing in the config file. Closes issue 173_. + When running a module with coverage run -m , certain details of the execution environment weren't the same as for python -m . This had the unfortunate side-effect of making coverage run -m unittest discover not work if you had tests in a directory named "test". This fixes issue 155_. + Now the exit status of your product code is properly used as the process status when running python -m coverage run .... Thanks, JT Olds. + When installing into pypy, we no longer attempt (and fail) to compile the C tracer function, closing issue 166_. ------------------------------------------------------------------- Thu May 24 11:47:40 UTC 2012 - cfarrell@suse.com - license update: BSD-2-Clause and (GPL-2.0+ or MIT) __init__.py is the only file with a definitive license statement (BSD-2-Clause). Also, package contains jquery components (GPL-2.0+ or MIT) ------------------------------------------------------------------- Wed May 23 07:30:26 UTC 2012 - highwaystar.ru@gmail.com - python3 package added - minor spec improvement (files section) ------------------------------------------------------------------- Sat Mar 10 16:54:01 UTC 2012 - saschpe@gmx.de - Simplify macro usage ------------------------------------------------------------------- Thu Nov 10 11:11:58 UTC 2011 - saschpe@suse.de - Update to version 3.5.1: * The [paths] feature unfortunately didn't work in real world situations where you wanted to, you know, report on the combined data. Now all paths stored in the combined file are canonicalized properly. ------------------------------------------------------------------- Tue Sep 27 08:32:20 UTC 2011 - saschpe@suse.de - Add python-distribute runtime requirement ------------------------------------------------------------------- Thu Sep 8 15:43:42 UTC 2011 - saschpe@suse.de - Update to version 3.5.1b1: * for-else constructs are understood better, and don't cause erroneous partial branch warnings. Fixes issue 122. * Branch coverage for with statements is improved, fixing issue 128. * The number of partial branches reported on the HTML summary page was different than the number reported on the individual file pages. This is now fixed. * An explicit include directive to measure files in the Python installation wouldn't work because of the standard library exclusion. Now the include directive takes precendence, and the files will be measured. Fixes issue 138. * The HTML report now handles Unicode characters in Python source files properly. This fixes issue 124 and issue 144. Thanks, Devin Jeanpierre. * In order to help the core developers measure the test coverage of the standard library, Brandon Rhodes devised an aggressive hack to trick Python into running some coverage code before anything else in the process. See the coverage/fullcoverage directory if you are interested. ...see CHANGES.txt for more - Spec file cleanup: * Use python-distribute instead of python-setuptools * Changed license to BSD-3-Clause (SPDX style) ------------------------------------------------------------------- Fri May 6 12:32:26 UTC 2011 - saschpe@suse.de - Update to version 3.4: + The XML report is now sorted by package name, fixing issue 88. + Programs that exited with sys.exit() with no argument weren't handled properly, producing a coverage.py stack trace. That is now fixed. - Changes from version 3.3.1: + Using parallel=True in .coveragerc file prevented reporting, but now does not, fixing issue 49. + When running your code with "coverage run", if you call sys.exit(), coverage.py will exit with that status code, fixing issue 50. - Added documentation (AUTHORS.txt, CHANGES.txt and README.txt) - Addded changes file ------------------------------------------------------------------- Sat Aug 22 12:00:00 UTC 2009 - cfarrell1980@gmail.com - Require setuptools ------------------------------------------------------------------- Thu May 28 12:00:00 UTC 2009 - cfarrell1980@gmail.com - Initial import