- Runs of the test-suite seem much more stable now, in this version
of QEMU. (bsc#1203610) We are also fine re-enabling running them
in parallel.
- Switch QEMU Linux user to emulate the same CPU as the one of the
host by default. This is a bit conrtoversial and tricky, when
thinking about system emulation/virtualization. But for linux-user,
it should be just fine. (bsc#1203684)
* Patches added:
linux-user-use-max-as-default-CPU-model-.patch
- Be less verbose when packaging documentation. In fact, with just
a couple of (minor) re-arrangements, we can get rid of having to
list all the files all the time
- Package /etc/qemu/bridge.conf as '%config(noreplace). Next step
will probably be to move it to /usr/etc/qemu (bsc#1201944)
- Switch to %autosetup for all products (this required some changes
in update_git.sh)
- Run check-qtest sequentially, as it's more reliable, when in OBS
- Build with libbpf, fdt and capstone support
- Drop the patch adding our support document, and deal with that
in the spec file directly
* Patches dropped:
doc-add-our-support-doc-to-the-main-proj.patch
- Updated to latest upstream version 7.1
* https://wiki.qemu.org/ChangeLog/7.1
Be sure to also check the following pages:
* https://qemu-project.gitlab.io/qemu/about/removed-features.html
* https://qemu-project.gitlab.io/qemu/about/deprecated.html
Some notable changes:
* [x86] Support for architectural LBRs on KVM virtual machines
* [x86] The libopcode-based disassembler has been removed. Use
Capstone instead
* [LoongArch] Add initial support for the LoongArch64 architecture.
* [ARM] The emulated SMMUv3 now advertises support for SMMUv3.2-BBML2
* [ARM] The xlnx-zynqmp SoC model now implements the 4 TTC timers
* [ARM] The versal machine now models the Cortex-R5s in the Real-Time
Processing Unit (RPU) subsystem
* [ARM] The virt board now supports emulation of the GICv4.0
* [ARM] New emulated CPU types: Cortex-A76, Neoverse-N1
* [HPPA] Fix serial port pass-through from host to guest
* [HPPA] Lots of general code improvements and tidy-ups
* [RISC-V] RISC-V
* [RISC-V] Add support for privileged spec version 1.12.0
* [RISC-V] Use privileged spec version 1.12.0 for virt machine by default
* [RISC-V] Allow software access to MIP SEIP
* [RISC-V] Add initial support for the Sdtrig extension
* [RISC-V] Optimisations and improvements for the vector extension
* [VFIO] Experimental support for exposing emulated PCI devices over the
new vfio-user protocol (a vfio-user client is not yet available
in QEMU, though)
* [QMP] The on-cbw-error option for copy-before-write filter, to specify
behavior on CBW (copy before write) operation failure.
* [QMP] The cbw-timeout option for copy-before-write filter, to specify
timeout for CBW operation.
* [QMP] New commands query-stats and query-stats-schema to retrieve
statistics from various QEMU subsystems (right now only from
KVM).
* [QMP] The PanicAction can now be configured to report an exit-failure
(useful for automated testing)
* [Networking] QEMU can be compiled with the system slirp library even
when using CFI. This requires libslirp 4.7.
* [Migration] Support for zero-copy-send on Linux, which reduces CPU
usage on the source host. Note that locked memory is needed
to support this
* Patches added:
Revert-tests-qtest-enable-more-vhost-use.patch
meson-remove-pkgversion-from-CONFIG_STAM.patch
* Patches dropped:
AIO-Reduce-number-of-threads-for-32bit-h.patch
Makefile-Don-t-check-pc-bios-as-pre-requ.patch
Revert-8dcb404bff6d9147765d7dd3e9c849337.patch
Revert-qht-constify-qht_statistics_init.patch
XXX-dont-dump-core-on-sigabort.patch
acpi_piix4-Fix-migration-from-SLE11-SP2.patch
configure-only-populate-roms-if-softmmu.patch
configure-remove-pkgversion-from-CONFIG_.patch
coroutine-ucontext-use-QEMU_DEFINE_STATI.patch
coroutine-use-QEMU_DEFINE_STATIC_CO_TLS.patch
coroutine-win32-use-QEMU_DEFINE_STATIC_C.patch
hostmem-default-the-amount-of-prealloc-t.patch
hw-usb-hcd-ehci-fix-writeback-order.patch
i8254-Fix-migration-from-SLE11-SP2.patch
intc-exynos4210_gic-replace-snprintf-wit.patch
modules-generates-per-target-modinfo.patch
modules-introduces-module_kconfig-direct.patch
pc-bios-s390-ccw-net-avoid-warning-about.patch
pci-fix-overflow-in-snprintf-string-form.patch
qemu-cvs-gettimeofday.patch
qemu-cvs-ioctl_debug.patch
qemu-cvs-ioctl_nodirection.patch
qht-Revert-some-constification-in-qht.c.patch
qom-handle-case-of-chardev-spice-module-.patch
scsi-lsi53c895a-fix-use-after-free-in-ls.patch
scsi-lsi53c895a-really-fix-use-after-fre.patch
softmmu-Always-initialize-xlat-in-addres.patch
sphinx-change-default-language-to-en.patch
test-add-mapping-from-arch-of-i686-to-qe.patch
tests-Fix-block-tests-to-be-compatible-w.patch
tests-qtest-Move-the-fuzz-tests-to-x86-o.patch
usb-Help-compiler-out-to-avoid-a-warning.patch
OBS-URL: https://build.opensuse.org/request/show/1006734
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=732
- Update to v6.1: see https://wiki.qemu.org/ChangeLog/6.1
For a full list of formely deprecated features that are removed,
consult: https://qemu-project.gitlab.io/qemu/about/removed-features.html
For a list of new deprecated features, consult:
https://qemu-project.gitlab.io/qemu/about/deprecated.html
Some noteworthy changes:
* Removed moxie CPU.
* Removed lm32 CPU.
* Removed unicore32 CPU.
* Removed 'info cpustats'.
* Added Aspeed machines: rainier-bmc, quanta-q7l1-bmc.
* Added npcm7xx machine: quanta-gbs-bmc.
* Model for Aspeed's Hash and Crypto Engine.
* SVE2 is now emulated, including bfloat16 support
* FEAT_I8MM, FEAT_TLBIOS, FEAT_TLBRANGE, FEAT_BF16, FEAT_AA32BF16, and
FEAT_MTE3 are now emulated.
* Improved hot-unplug failures on PowerPC pseries machine.
* Implemented some POWER10 instructions in TCG.
* Added shakti_c RISC-V machine.
* Improved documentation for RISC-V machines.
* CPU models for gen16 have been added for s390x.
* New CPU model versions added with XSAVES enabled:
Skylake-Client-v4, Skylake-Server-v5, Cascadelake-Server-v5,
Cooperlake-v2, Icelake-Client-v3, Icelake-Server-v5, Denverton-v3,
Snowridge-v3, Dhyana-v2
* Added ACPI based PCI hotplug support to Q35 machine. Enabled and
used by default since pc-q35-6.1 machine type.
* Added support for the pca9546 and pca9548 I2C muxes.
* Added support for PMBus and several PMBus devices.
* Crypto subsystem:
The preferred crypto backend driver now gnutls, with libgcrypt as the
second choice, and nettle as third choice, with ordering driven mostly
by performance of the ciphers.
* Misc doc improvements.
* Patches removed:
block-nvme-Fix-VFIO_MAP_DMA-failed-No-sp.patch
hmp-Fix-loadvm-to-resume-the-VM-on-succe.patch
hw-block-nvme-align-with-existing-style.patch
hw-block-nvme-consider-metadata-read-aio.patch
hw-net-can-sja1000-fix-buff2frame_bas-an.patch
hw-nvme-fix-missing-check-for-PMR-capabi.patch
hw-nvme-fix-pin-based-interrupt-behavior.patch
hw-pci-host-q35-Ignore-write-of-reserved.patch
hw-rdma-Fix-possible-mremap-overflow-in-.patch
hw-rx-rx-gdbsim-Do-not-accept-invalid-me.patch
hw-usb-Do-not-build-USB-subsystem-if-not.patch
hw-usb-host-stub-Remove-unused-header.patch
linux-user-aarch64-Enable-hwcap-for-RND-.patch
module-for-virtio-gpu-pre-load-module-to.patch
monitor-qmp-fix-race-on-CHR_EVENT_CLOSED.patch
pvrdma-Ensure-correct-input-on-ring-init.patch
pvrdma-Fix-the-ring-init-error-flow-CVE-.patch
qemu-config-load-modules-when-instantiat.patch
qemu-config-parse-configuration-files-to.patch
qemu-config-use-qemu_opts_from_qdict.patch
runstate-Initialize-Error-to-NULL.patch
sockets-update-SOCKET_ADDRESS_TYPE_FD-li.patch
target-i386-Exit-tb-after-wrmsr.patch
target-sh4-Return-error-if-CPUClass-get_.patch
tcg-Allocate-sufficient-storage-in-temp_.patch
tcg-arm-Fix-tcg_out_op-function-signatur.patch
tcg-sparc-Fix-temp_allocate_frame-vs-spa.patch
ui-Fix-memory-leak-in-qemu_xkeymap_mappi.patch
usb-hid-avoid-dynamic-stack-allocation.patch
usb-limit-combined-packets-to-1-MiB-CVE-.patch
usb-mtp-avoid-dynamic-stack-allocation.patch
usb-redir-avoid-dynamic-stack-allocation.patch
usbredir-fix-free-call.patch
vfio-ccw-Permit-missing-IRQs.patch
vhost-user-blk-Check-that-num-queues-is-.patch
vhost-user-blk-Don-t-reconnect-during-in.patch
vhost-user-blk-Fail-gracefully-on-too-la.patch
vhost-user-blk-Get-more-feature-flags-fr.patch
vhost-user-blk-Make-sure-to-set-Error-on.patch
vhost-user-gpu-abstract-vg_cleanup_mappi.patch
vhost-user-gpu-fix-leak-in-virgl_cmd_res.patch
vhost-user-gpu-fix-leak-in-virgl_resourc.patch
vhost-user-gpu-fix-memory-disclosure-in-.patch
vhost-user-gpu-fix-memory-leak-in-vg_res.patch
vhost-user-gpu-fix-memory-leak-while-cal.patch
vhost-user-gpu-fix-OOB-write-in-virgl_cm.patch
vhost-user-gpu-fix-resource-leak-in-vg_r.patch
vhost-vdpa-don-t-initialize-backend_feat.patch
virtio-blk-Fix-rollback-path-in-virtio_b.patch
virtio-Fail-if-iommu_platform-is-request.patch
virtiofsd-Fix-side-effect-in-assert.patch
vl-allow-not-specifying-size-in-m-when-u.patch
vl-Fix-an-assert-failure-in-error-path.patch
vl-plug-object-back-into-readconfig.patch
vl-plumb-keyval-based-options-into-readc.patch
x86-acpi-use-offset-instead-of-pointer-w.patch
OBS-URL: https://build.opensuse.org/request/show/914430
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=665
- Switch method of splitting off hw-s390x-virtio-gpu-ccw.so as a
module to what was accepted upstream (bsc#1181103)
* Patches dropped:
hw-s390x-modularize-virtio-gpu-ccw.patch
* Patches added:
s390x-add-have_virtio_ccw.patch
s390x-modularize-virtio-gpu-ccw.patch
s390x-move-S390_ADAPTER_SUPPRESSIBLE.patch
- Fix OOB access in sdhci interface (CVE-2020-17380, bsc#1175144,
CVE-2020-25085, bsc#1176681, CVE-2021-3409, bsc#1182282)
hw-sd-sd-Actually-perform-the-erase-oper.patch
hw-sd-sd-Fix-build-error-when-DEBUG_SD-i.patch
hw-sd-sdhci-Correctly-set-the-controller.patch
hw-sd-sdhci-Don-t-transfer-any-data-when.patch
hw-sd-sdhci-Don-t-write-to-SDHC_SYSAD-re.patch
hw-sd-sdhci-Limit-block-size-only-when-S.patch
hw-sd-sdhci-Reset-the-data-pointer-of-s-.patch
hw-sd-sd-Move-the-sd_block_-read-write-a.patch
hw-sd-sd-Skip-write-protect-groups-check.patch
- Fix potential privilege escalation in virtiofsd tool
(CVE-2021-20263, bsc#1183373)
tools-virtiofsd-Replace-the-word-whiteli.patch
viriofsd-Add-support-for-FUSE_HANDLE_KIL.patch
virtiofsd-extract-lo_do_open-from-lo_ope.patch
virtiofsd-optionally-return-inode-pointe.patch
virtiofsd-prevent-opening-of-special-fil.patch
virtiofs-drop-remapped-security.capabili.patch
virtiofsd-Save-error-code-early-at-the-f.patch
- Fix OOB access (stack overflow) in rtl8139 NIC emulation
(CVE-2021-3416, bsc#1182968)
net-introduce-qemu_receive_packet.patch
rtl8139-switch-to-use-qemu_receive_packe.patch
- Fix OOB access (stack overflow) in other NIC emulations
(CVE-2021-3416)
cadence_gem-switch-to-use-qemu_receive_p.patch
dp8393x-switch-to-use-qemu_receive_packe.patch
e1000-switch-to-use-qemu_receive_packet-.patch
lan9118-switch-to-use-qemu_receive_packe.patch
msf2-mac-switch-to-use-qemu_receive_pack.patch
pcnet-switch-to-use-qemu_receive_packet-.patch
sungem-switch-to-use-qemu_receive_packet.patch
tx_pkt-switch-to-use-qemu_receive_packet.patch
- Fix heap overflow in MSIx emulation (CVE-2020-27821, bsc#1179686)
memory-clamp-cached-translation-in-case-.patch
- Include upstream patches designated as stable material and
reviewed for applicability to include here
hw-arm-virt-Disable-pl011-clock-migratio.patch
xen-block-Fix-removal-of-backend-instanc.patch
- Fix package scripts to not use hard coded paths for temporary
working directories and log files (bsc#1182425)
OBS-URL: https://build.opensuse.org/request/show/882222
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=632
- Include upstream patches designated as stable material and
reviewed for applicability to include here
block-Separate-blk_is_writable-and-blk_s.patch
hw-intc-arm_gic-Fix-interrupt-ID-in-GICD.patch
hw-net-lan9118-Fix-RX-Status-FIFO-PEEK-v.patch
hw-timer-slavio_timer-Allow-64-bit-acces.patch
net-Fix-handling-of-id-in-netdev_add-and.patch
target-arm-Don-t-decode-insns-in-the-XSc.patch
target-arm-Fix-MTE0_ACTIVE.patch
target-arm-Introduce-PREDDESC-field-defi.patch
target-arm-Update-PFIRST-PNEXT-for-pred_.patch
target-arm-Update-REV-PUNPK-for-pred_des.patch
target-arm-Update-ZIP-UZP-TRN-for-pred_d.patch
tcg-Use-memset-for-large-vector-byte-rep.patch
ui-vnc-Add-missing-lock-for-send_color_m.patch
virtio-move-use-disabled-flag-property-t.patch
- binutils v2.36 has changed the handling of the assembler's
-mx86-used-note, resulting in a build failure. To compensate, we
now explicitly specify -mx86-used-note=no in the seabios Makefile
(boo#1181775)
build-be-explicit-about-mx86-used-note-n.patch
OBS-URL: https://build.opensuse.org/request/show/869843
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=614
Update to v4.1.0. Also includes other major packaging changes as follows:
There is a new package maintenance workflow - see README.PACKAGING for details.
The sibling packages qemu-linux-user and qemu-testsuite are now created with the Build Service's MultiBuild feature. This also necessitates combining the qemu-linux-user changelog content back into qemu's. Luckily the delta there is quite small. Note that the qemu spec file is now that much busier, but added section markers should help reduce the confusion. Also qemu is being enabled for RISCV host compatibility, so some changes are related to that as well.
OBS-URL: https://build.opensuse.org/request/show/730437
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=487
