Full list of backports here:
https://lore.kernel.org/qemu-devel/1718081053.366429.1238758.nullmailer@tls.msk.ru/
A selection of them is reported here too:
Update version for 9.0.1 release
target/loongarch: fix a wrong print in cpu dump
ui/sdl2: Allow host to power down screen
virtio-gpu: fix v2 migration
target/i386: fix SSE and SSE2 feature check
target/i386: fix xsave.flat from kvm-unit-tests
disas/riscv: Decode all of the pmpcfg and pmpaddr CSRs
riscv, gdbstub.c: fix reg_width in ricsv_gen_dynamic_vector_feature()
target/riscv/kvm.c: Fix the hart bit setting of AIA
target/riscv: rvzicbo: Fixup CBO extension register calculation
target/riscv: do not set mtval2 for non guest-page faults
target/riscv: prioritize pmp errors in raise_mmu_exception()
target/riscv: rvv: Remove redudant SEW checking for vector fp narrow/widen instructions
target/riscv: rvv: Check single width operator for vfncvt.rod.f.f.w
target/riscv: rvv: Check single width operator for vector fp widen instructions
target/riscv: rvv: Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions
target/riscv/cpu.c: fix Zvkb extension config
target/riscv: Fix the element agnostic function problem
target/riscv/kvm: tolerate KVM disable ext errors
target/riscv/kvm: Fix exposure of Zkr
hw/intc/riscv_aplic: APLICs should add child earlier than realize
iotests: test NBD+TLS+iothread
qio: Inherit follow_coroutine_ctx across TLS
...
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=848
- qtests test are not realiable when run inside OBS builders, so
let's disable that part of the testsuite for now. There is work
ongoing to run it somewhere else (on dedicated hosts) to avoid
loosing coverage. (bsc#1204566)
- Improve dependency handling (e.g., what's recommended vs. what's
required.
- Add a subpackage (qemu-headless) that brings in all the packages
that are needed for creating VMs with tools like virt-install
or VirtManager, run either locally or from a remote host.
(bsc#1202166)
OBS-URL: https://build.opensuse.org/request/show/1031414
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=740
- Fixes bsc#1204082
* Patches added:
block-io_uring-revert-Use-io_uring_regis.patch
- Due to change in where some documentation files are, if
qemu-guest-agent is installed, we need to make sure we update it
to our version (bsc#1203995)
- The links in the forsplit dirs, in each subpackage, born to deal with
package & subpackage splitting, are not really used. In fact, they're
"Provides:"-ed by a bunch of subpackages, but there's no "Requires:"
for any of them. Let's just get rid of them.
OBS-URL: https://build.opensuse.org/request/show/1008823
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=737
- Runs of the test-suite seem much more stable now, in this version
of QEMU. (bsc#1203610) We are also fine re-enabling running them
in parallel.
- Switch QEMU Linux user to emulate the same CPU as the one of the
host by default. This is a bit conrtoversial and tricky, when
thinking about system emulation/virtualization. But for linux-user,
it should be just fine. (bsc#1203684)
* Patches added:
linux-user-use-max-as-default-CPU-model-.patch
- Be less verbose when packaging documentation. In fact, with just
a couple of (minor) re-arrangements, we can get rid of having to
list all the files all the time
- Package /etc/qemu/bridge.conf as '%config(noreplace). Next step
will probably be to move it to /usr/etc/qemu (bsc#1201944)
- Switch to %autosetup for all products (this required some changes
in update_git.sh)
- Run check-qtest sequentially, as it's more reliable, when in OBS
- Build with libbpf, fdt and capstone support
- Drop the patch adding our support document, and deal with that
in the spec file directly
* Patches dropped:
doc-add-our-support-doc-to-the-main-proj.patch
- Updated to latest upstream version 7.1
* https://wiki.qemu.org/ChangeLog/7.1
Be sure to also check the following pages:
* https://qemu-project.gitlab.io/qemu/about/removed-features.html
* https://qemu-project.gitlab.io/qemu/about/deprecated.html
Some notable changes:
* [x86] Support for architectural LBRs on KVM virtual machines
* [x86] The libopcode-based disassembler has been removed. Use
Capstone instead
* [LoongArch] Add initial support for the LoongArch64 architecture.
* [ARM] The emulated SMMUv3 now advertises support for SMMUv3.2-BBML2
* [ARM] The xlnx-zynqmp SoC model now implements the 4 TTC timers
* [ARM] The versal machine now models the Cortex-R5s in the Real-Time
Processing Unit (RPU) subsystem
* [ARM] The virt board now supports emulation of the GICv4.0
* [ARM] New emulated CPU types: Cortex-A76, Neoverse-N1
* [HPPA] Fix serial port pass-through from host to guest
* [HPPA] Lots of general code improvements and tidy-ups
* [RISC-V] RISC-V
* [RISC-V] Add support for privileged spec version 1.12.0
* [RISC-V] Use privileged spec version 1.12.0 for virt machine by default
* [RISC-V] Allow software access to MIP SEIP
* [RISC-V] Add initial support for the Sdtrig extension
* [RISC-V] Optimisations and improvements for the vector extension
* [VFIO] Experimental support for exposing emulated PCI devices over the
new vfio-user protocol (a vfio-user client is not yet available
in QEMU, though)
* [QMP] The on-cbw-error option for copy-before-write filter, to specify
behavior on CBW (copy before write) operation failure.
* [QMP] The cbw-timeout option for copy-before-write filter, to specify
timeout for CBW operation.
* [QMP] New commands query-stats and query-stats-schema to retrieve
statistics from various QEMU subsystems (right now only from
KVM).
* [QMP] The PanicAction can now be configured to report an exit-failure
(useful for automated testing)
* [Networking] QEMU can be compiled with the system slirp library even
when using CFI. This requires libslirp 4.7.
* [Migration] Support for zero-copy-send on Linux, which reduces CPU
usage on the source host. Note that locked memory is needed
to support this
* Patches added:
Revert-tests-qtest-enable-more-vhost-use.patch
meson-remove-pkgversion-from-CONFIG_STAM.patch
* Patches dropped:
AIO-Reduce-number-of-threads-for-32bit-h.patch
Makefile-Don-t-check-pc-bios-as-pre-requ.patch
Revert-8dcb404bff6d9147765d7dd3e9c849337.patch
Revert-qht-constify-qht_statistics_init.patch
XXX-dont-dump-core-on-sigabort.patch
acpi_piix4-Fix-migration-from-SLE11-SP2.patch
configure-only-populate-roms-if-softmmu.patch
configure-remove-pkgversion-from-CONFIG_.patch
coroutine-ucontext-use-QEMU_DEFINE_STATI.patch
coroutine-use-QEMU_DEFINE_STATIC_CO_TLS.patch
coroutine-win32-use-QEMU_DEFINE_STATIC_C.patch
hostmem-default-the-amount-of-prealloc-t.patch
hw-usb-hcd-ehci-fix-writeback-order.patch
i8254-Fix-migration-from-SLE11-SP2.patch
intc-exynos4210_gic-replace-snprintf-wit.patch
modules-generates-per-target-modinfo.patch
modules-introduces-module_kconfig-direct.patch
pc-bios-s390-ccw-net-avoid-warning-about.patch
pci-fix-overflow-in-snprintf-string-form.patch
qemu-cvs-gettimeofday.patch
qemu-cvs-ioctl_debug.patch
qemu-cvs-ioctl_nodirection.patch
qht-Revert-some-constification-in-qht.c.patch
qom-handle-case-of-chardev-spice-module-.patch
scsi-lsi53c895a-fix-use-after-free-in-ls.patch
scsi-lsi53c895a-really-fix-use-after-fre.patch
softmmu-Always-initialize-xlat-in-addres.patch
sphinx-change-default-language-to-en.patch
test-add-mapping-from-arch-of-i686-to-qe.patch
tests-Fix-block-tests-to-be-compatible-w.patch
tests-qtest-Move-the-fuzz-tests-to-x86-o.patch
usb-Help-compiler-out-to-avoid-a-warning.patch
OBS-URL: https://build.opensuse.org/request/show/1006734
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=732
- Substantial rework of the spec file:
* the 'make check' testsuite now runs in the %check section of
the main package, not in a subpackage
* switched from %setup to %autosetup
* rearranged the content in order to minimize the use of %if,
%ifarch, etc
- Properly fix bsc#1198038, CVE-2022-0216
* Patches added:
scsi-lsi53c895a-really-fix-use-after-fre.patch
tests-qtest-Move-the-fuzz-tests-to-x86-o.patch
- Make temp dir (for update_git.sh) configurable
- Added new subpackages (audio-dbus, ui-dbus)
- bsc#1199018 was never fixed in Factory's QEMU 6.2. It is
now (since the patches are already in SeaBIOS 1.16.0)
- Some tests are having issues when run in OBS. They seem to be
due to race conditions, triggered by resource constraints of
OBS workers. Let's disable them for now, while looking for a fix
- Update to v7.0.0. For full release notese, see:
* https://wiki.qemu.org/ChangeLog/7.0
Be sure to also check the following pages:
* https://qemu-project.gitlab.io/qemu/about/removed-features.html
* https://qemu-project.gitlab.io/qemu/about/deprecated.html
Some notable changes:
* [ARM] The virt board has gained a new control knob to disable passing a RNG seed in the DTB (dtb-kaslr-seed)
* [ARM] The AST2600 SoC now supports a dummy version of the i3c device
* [ARM] The virt board can now run guests with KVM on hosts with restricted IPA ranges
* [ARM] The virt board now supports virtio-mem-pci
* [ARM] The virt board now supports specifying the guest CPU topology
* [ARM] On the virt board, we now enable PAuth when using KVM or hvf and the host CPU supports it
* [RISC-V] Add support for ratified 1.0 Vector extension
* [RISC-V] Support for the Zve64f and Zve32f extensions
* [RISC-V] Drop support for draft 0.7.1 Vector extension
* [RISC-V] Support Zfhmin and Zfh extensions
* [RISC-V] RISC-V KVM support
* [RISC-V] Mark Hypervisor extension as non experimental
* [RISC-V] Enable Hypervisor extension by default
* [x86] Support for Intel AMX.
* [PCI/PCIe] Q35: fix PCIe device becoming disabled after migration when ACPI based PCI hotplug is used (6b0969f1ec)
* [PCI/PCIe] initial bits of SR/IOV support (250346169)
* [PCI/PCIe] arm/virt: fixed PXB interrupt routing (e609301b45)
* [PCI/PCIe] arm/virt: support for virtio-mem-pci (b1b87327a9)
* [virtiofs] Fix for CVE-2022-0358 - behaviour with supplementary groups and SGID directories
* [virtiofs] Improved security label support
* [virtiofs] The virtiofsd in qemu is now starting to be deprecated; please start using and contributing to Rust virtiofsd
* Patches dropped:
acpi-validate-hotplug-selector-on-access.patch
block-backend-Retain-permissions-after-m.patch
block-qdict-Fix-Werror-maybe-uninitializ.patch
brotli-fix-actual-variable-array-paramet.patch
display-qxl-render-fix-race-condition-in.patch
doc-Add-the-SGX-numa-description.patch
hw-i386-amd_iommu-Fix-maybe-uninitialize.patch
hw-intc-exynos4210_gic-provide-more-room.patch
hw-nvme-fix-CVE-2021-3929.patch
hw-nvram-at24-return-0xff-if-1-byte-addr.patch
iotest-065-explicit-compression-type.patch
iotest-214-explicit-compression-type.patch
iotest-302-use-img_info_log-helper.patch
iotest-303-explicit-compression-type.patch
iotest-39-use-_qcow2_dump_header.patch
iotests-60-more-accurate-set-dirty-bit-i.patch
iotests-bash-tests-filter-compression-ty.patch
iotests-common.rc-introduce-_qcow2_dump_.patch
iotests-declare-lack-of-support-for-comp.patch
iotests-drop-qemu_img_verbose-helper.patch
iotests-massive-use-_qcow2_dump_header.patch
iotests-MRCE-Write-data-to-source.patch
iotests.py-filter-out-successful-output-.patch
iotests.py-img_info_log-rename-imgopts-a.patch
iotests.py-implement-unsupported_imgopts.patch
iotests.py-qemu_img-create-support-IMGOP.patch
iotests.py-rewrite-default-luks-support-.patch
iotests-specify-some-unsupported_imgopts.patch
meson-build-all-modules-by-default.patch
numa-Enable-numa-for-SGX-EPC-sections.patch
numa-Support-SGX-numa-in-the-monitor-and.patch
python-aqmp-add-__del__-method-to-legacy.patch
python-aqmp-add-_session_guard.patch
python-aqmp-add-SocketAddrT-to-package-r.patch
python-aqmp-add-socket-bind-step-to-lega.patch
python-aqmp-add-start_server-and-accept-.patch
python-aqmp-copy-type-definitions-from-q.patch
python-aqmp-drop-_bind_hack.patch
python-aqmp-fix-docstring-typo.patch
python-aqmp-Fix-negotiation-with-pre-oob.patch
python-aqmp-fix-race-condition-in-legacy.patch
Python-aqmp-fix-type-definitions-for-myp.patch
python-aqmp-handle-asyncio.TimeoutError-.patch
python-aqmp-refactor-_do_accept-into-two.patch
python-aqmp-remove-_new_session-and-_est.patch
python-aqmp-rename-accept-to-start_serve.patch
python-aqmp-rename-AQMPError-to-QMPError.patch
python-aqmp-split-_client_connected_cb-o.patch
python-aqmp-squelch-pylint-warning-for-t.patch
python-aqmp-stop-the-server-during-disco.patch
python-introduce-qmp-shell-wrap-convenie.patch
python-machine-raise-VMLaunchFailure-exc.patch
python-move-qmp-shell-under-the-AQMP-pac.patch
python-move-qmp-utilities-to-python-qemu.patch
python-qmp-switch-qmp-shell-to-AQMP.patch
python-support-recording-QMP-session-to-.patch
python-upgrade-mypy-to-0.780.patch
qcow2-simple-case-support-for-downgradin.patch
qemu-binfmt-conf.sh-should-use-F-as-shor.patch
tests-qemu-iotests-040-Skip-TestCommitWi.patch
tests-qemu-iotests-Fix-051-for-binaries-.patch
tests-qemu-iotests-testrunner-Quote-case.patch
tools-virtiofsd-Add-rseq-syscall-to-the-.patch
ui-cursor-fix-integer-overflow-in-cursor.patch
vhost-vsock-detach-the-virqueue-element-.patch
virtiofsd-Drop-membership-of-all-supplem.patch
virtio-net-fix-map-leaking-on-error-duri.patch
Disable-some-tests-that-have-problems-in.patch
* Patches added:
intc-exynos4210_gic-replace-snprintf-wit.patch
Revert-8dcb404bff6d9147765d7dd3e9c849337.patch
------------------------------------------------------------------
- Fix bsc#1197084
* Patches added:
hostmem-default-the-amount-of-prealloc-t.patch
- Get rid of downstream patches breaking s390 modules. Replace
them with the upstream proposed and Acked (but never committed)
solution (bsc#1199015)
* Patches added:
modules-generates-per-target-modinfo.patch
modules-introduces-module_kconfig-direct.patch
* Patches dropped:
Fix-the-module-building-problem-for-s390.patch
modules-quick-fix-a-fundamental-error-in.patch
- backport patches for having coroutine work well when LTO is used
* Patches added:
coroutine-ucontext-use-QEMU_DEFINE_STATI.patch
coroutine-use-QEMU_DEFINE_STATIC_CO_TLS.patch
coroutine-win32-use-QEMU_DEFINE_STATIC_C.patch
- seabios: drop patch that changes python in python2.
Just go to python3 directly.
* Patches dropped:
seabios-use-python2-explicitly-as-needed.patch
OBS-URL: https://build.opensuse.org/request/show/990667
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=726
- Substantial rework of the spec file:
* the 'make check' testsuite now runs in the %check section of
the main package, not in a subpackage
* switched from %setup to %autosetup
* rearranged the content in order to minimize the use of %if,
%ifarch, etc
- Some tests are having issues when run in OBS. They seem to be due to
race conditions, triggered by resource constraints on the OBS workers.
Let's disable them for now, while we investigate and try to fix them.
* Patches added:
Disable-some-tests-that-have-problems-in.patch
- Revert an upstream commit that add some qtests that are problematic
for GCC12+LTO
* Patches added:
Revert-8dcb404bff6d9147765d7dd3e9c849337.patch
- _multibuild: disable the build of qemu-testsuite. We are going
to run 'make check' as part of the %check phase of the main (qemu)
package, so we do not need a dedicated build any longer.
- Get rid of downstream patches breaking s390 modules. Replace
them with the upstream proposed and Acked (but never committed)
solution (bsc#1199015)
* Patches added:
modules-generates-per-target-modinfo.patch
modules-introduces-module_kconfig-direct.patch
* Patches dropped:
Fix-the-module-building-problem-for-s390.patch
modules-quick-fix-a-fundamental-error-in.patch
- backport patches for having coroutine work well when LTO is used
* Patches added:
coroutine-ucontext-use-QEMU_DEFINE_STATI.patch
coroutine-use-QEMU_DEFINE_STATIC_CO_TLS.patch
coroutine-win32-use-QEMU_DEFINE_STATIC_C.patch
- seabios: drop patch that changes python in python2. Just
go to python3 directly.
* Patches dropped:
seabios-use-python2-explicitly-as-needed.patch
- Make temp dir (for update_git.sh) configurable
- Added new subpackages (audio-dbus, ui-dbus)
- Update to v7.0.0. For full release notese, see:
* https://wiki.qemu.org/ChangeLog/7.0
Be sure to also check the following pages:
* https://qemu-project.gitlab.io/qemu/about/removed-features.html
* https://qemu-project.gitlab.io/qemu/about/deprecated.html
Some notable changes:
* [ARM] The virt board has gained a new control knob to disable passing a RNG seed in the DTB (dtb-kaslr-seed)
* [ARM] The AST2600 SoC now supports a dummy version of the i3c device
* [ARM] The virt board can now run guests with KVM on hosts with restricted IPA ranges
* [ARM] The virt board now supports virtio-mem-pci
* [ARM] The virt board now supports specifying the guest CPU topology
* [ARM] On the virt board, we now enable PAuth when using KVM or hvf and the host CPU supports it
* [RISC-V] Add support for ratified 1.0 Vector extension
* [RISC-V] Support for the Zve64f and Zve32f extensions
* [RISC-V] Drop support for draft 0.7.1 Vector extension
* [RISC-V] Support Zfhmin and Zfh extensions
* [RISC-V] RISC-V KVM support
* [RISC-V] Mark Hypervisor extension as non experimental
* [RISC-V] Enable Hypervisor extension by default
* [x86] Support for Intel AMX.
* [PCI/PCIe] Q35: fix PCIe device becoming disabled after migration when ACPI based PCI hotplug is used (6b0969f1ec)
* [PCI/PCIe] initial bits of SR/IOV support (250346169)
* [PCI/PCIe] arm/virt: fixed PXB interrupt routing (e609301b45)
* [PCI/PCIe] arm/virt: support for virtio-mem-pci (b1b87327a9)
* [virtiofs] Fix for CVE-2022-0358 - behaviour with supplementary groups and SGID directories
* [virtiofs] Improved security label support
* [virtiofs] The virtiofsd in qemu is now starting to be deprecated; please start using and contributing to Rust virtiofsd
* Patches Added:
intc-exynos4210_gic-replace-snprintf-wit.patch
* Patches dropped:
Python-aqmp-fix-type-definitions-for-myp.patch
acpi-validate-hotplug-selector-on-access.patch
block-backend-Retain-permissions-after-m.patch
brotli-fix-actual-variable-array-paramet.patch
doc-Add-the-SGX-numa-description.patch
hw-i386-amd_iommu-Fix-maybe-uninitialize.patch
hw-intc-exynos4210_gic-provide-more-room.patch
hw-nvme-fix-CVE-2021-3929.patch
hw-nvram-at24-return-0xff-if-1-byte-addr.patch
iotest-065-explicit-compression-type.patch
iotest-214-explicit-compression-type.patch
iotest-302-use-img_info_log-helper.patch
iotest-303-explicit-compression-type.patch
iotest-39-use-_qcow2_dump_header.patch
iotests-60-more-accurate-set-dirty-bit-i.patch
iotests-MRCE-Write-data-to-source.patch
iotests-bash-tests-filter-compression-ty.patch
iotests-common.rc-introduce-_qcow2_dump_.patch
iotests-declare-lack-of-support-for-comp.patch
iotests-drop-qemu_img_verbose-helper.patch
iotests-massive-use-_qcow2_dump_header.patch
iotests-specify-some-unsupported_imgopts.patch
iotests.py-filter-out-successful-output-.patch
iotests.py-img_info_log-rename-imgopts-a.patch
iotests.py-implement-unsupported_imgopts.patch
iotests.py-qemu_img-create-support-IMGOP.patch
iotests.py-rewrite-default-luks-support-.patch
meson-build-all-modules-by-default.patch
numa-Enable-numa-for-SGX-EPC-sections.patch
numa-Support-SGX-numa-in-the-monitor-and.patch
python-aqmp-Fix-negotiation-with-pre-oob.patch
python-aqmp-add-SocketAddrT-to-package-r.patch
python-aqmp-add-__del__-method-to-legacy.patch
python-aqmp-add-_session_guard.patch
python-aqmp-add-socket-bind-step-to-lega.patch
python-aqmp-add-start_server-and-accept-.patch
python-aqmp-copy-type-definitions-from-q.patch
python-aqmp-drop-_bind_hack.patch
python-aqmp-fix-docstring-typo.patch
python-aqmp-fix-race-condition-in-legacy.patch
python-aqmp-handle-asyncio.TimeoutError-.patch
python-aqmp-refactor-_do_accept-into-two.patch
python-aqmp-remove-_new_session-and-_est.patch
python-aqmp-rename-AQMPError-to-QMPError.patch
python-aqmp-rename-accept-to-start_serve.patch
python-aqmp-split-_client_connected_cb-o.patch
python-aqmp-squelch-pylint-warning-for-t.patch
python-aqmp-stop-the-server-during-disco.patch
python-introduce-qmp-shell-wrap-convenie.patch
python-machine-raise-VMLaunchFailure-exc.patch
python-move-qmp-shell-under-the-AQMP-pac.patch
python-move-qmp-utilities-to-python-qemu.patch
python-qmp-switch-qmp-shell-to-AQMP.patch
python-support-recording-QMP-session-to-.patch
python-upgrade-mypy-to-0.780.patch
qcow2-simple-case-support-for-downgradin.patch
qemu-binfmt-conf.sh-should-use-F-as-shor.patch
tests-qemu-iotests-040-Skip-TestCommitWi.patch
tests-qemu-iotests-Fix-051-for-binaries-.patch
tests-qemu-iotests-testrunner-Quote-case.patch
tools-virtiofsd-Add-rseq-syscall-to-the-.patch
virtiofsd-Drop-membership-of-all-supplem.patch
block-qdict-Fix-Werror-maybe-uninitializ.patch
OBS-URL: https://build.opensuse.org/request/show/979381
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=717
- Build PPC firmwares from sources on non-PPC builds as well (bsc#1193545)
- Build RiscV firmwares on non-RiscV builds as well
- While there, refactor (and simplify!) the firmware building logic and code
* Patches added:
Makefile-define-endianess-for-cross-buil.patch
- Include vmxcap in the qemu-tools package (is being very useful for debugging bsc#1193364)
- The qemu package should require qemu-x86, qemu-arm, etc, as there's no point installing it without _any_ of them. Additionally, right now, the user does not get a working qemu, if recommended packages are disabled (e.g., on MicroOS or SLE Micro). bsc#1196087
- Give clearer instructions on how to modify the package patches from the output of update_git.sh (docs change only, no functional change)
- qemu,kvm: potential privilege escalation via virtiofsd (bsc#1195161, CVE-2022-0358)
* Patches added:
virtiofsd-Drop-membership-of-all-supplem.patch
OBS-URL: https://build.opensuse.org/request/show/959502
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=691
- Binary firmwares are built from sources by default (and not only on
x86) and then "cross-imported" among builds for different arches. Of
course this requires, additionally to these changes, a proper project
setup (see prjconf). This fixes bsc#1193545.
* Build x86 firmwares only on x86 builds (i.e., stop cross building
them on ARM)
* Build x86 firmwares only once (during x86_64 builds only), instead
of twice (i.e., during both %ix86 and x86_64, as we're doing now))
* Always build PPC firmwares (only on PPC builds)
* Build PPC firmwares only once (during ppc64le builds only), instead
of twice (i.e., during both ppc64 and ppc64le, as we're doing now))
OBS-URL: https://build.opensuse.org/request/show/952206
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=687
- Add an audio-oss sub-package
- Add some new (mostly documentation) files in the package
- Remove option --audio-drv-list because audio is detected by
meson automatically in latest version.
- Remove options --disable-jemalloc and --disable-tcmalloc
which are changed in v6.2.0.
- Update to v 6.2.0. For full release notese, see:
* https://wiki.qemu.org/ChangeLog/6.2.
Be sure to also check the following pages:
* https://qemu-project.gitlab.io/qemu/about/removed-features.html
* https://qemu-project.gitlab.io/qemu/about/deprecated.html
Some notable changes:
* virtio-mem: guest memory dumps are now fully supported, along
with pre-copy/post-copy migration and background guest snapshots
* QMP: support for nw DEVICE_UNPLUG_GUEST_ERROR to detect
guest-reported hotplug failures
* TCG: improvements to TCG plugin argument syntax, and multi-core
support for cache plugin
* 68k: improved support for Apple’s NuBus, including ability to
load declaration ROMs, and slot IRQ support
* ARM: macOS hosts with Apple Silicon CPUs now support ‘hvf’
accelerator for AArch64 guests
* ARM: emulation support for Fujitsu A64FX processor model
* ARM: emulation support for kudo-mbc machine type
* ARM: M-profile MVE extension is now supported for Cortex-M55
* ARM: ‘virt’ machine now supports an emulated ITS (Interrupt
Translation Service) and supports more than 123 CPUs in
emulation mode
* ARM: xlnx-zcu102 and xlnx-versal-virt machines now support
BBRAM and eFUSE devices
* PowerPC: improved POWER10 support for the ‘powernv’ machine type
* PowerPC: initial support for POWER10 DD2.0 CPU model
* PowerPC: support for FORM2 PAPR NUMA descriptions for ‘pseries’ machine type
* RISC-V: support for Zb[abcs] instruction set extensions
* RISC-V: support for vhost-user and numa mem options across all boards
* RISC-V: SiFive PWM support
* x86: support for new Snowridge-v4 CPU model
* x86: guest support for Intel SGX
* x86: AMD SEV guests now support measurement of kernel binary when doing
direct kernel boot (not using a bootloader)
* Patches dropped:
9pfs-fix-crash-in-v9fs_walk.patch
block-introduce-max_hw_iov-for-use-in-sc.patch
hmp-Unbreak-change-vnc.patch
hw-acpi-ich9-Add-compat-prop-to-keep-HPC.patch
hw-i386-acpi-build-Deny-control-on-PCIe-.patch
i386-cpu-Remove-AVX_VNNI-feature-from-Co.patch
net-vmxnet3-validate-configuration-value.patch
pcie-rename-native-hotplug-to-x-native-h.patch
plugins-do-not-limit-exported-symbols-if.patch
plugins-execlog-removed-unintended-s-at-.patch
qemu-nbd-Change-default-cache-mode-to-wr.patch
qemu-sockets-fix-unix-socket-path-copy-a.patch
target-arm-Don-t-skip-M-profile-reset-en.patch
target-i386-add-missing-bits-to-CR4_RESE.patch
tcg-arm-Fix-tcg_out_vec_op-function-sign.patch
uas-add-stream-number-sanity-checks.patch
vhost-vsock-fix-migration-issue-when-seq.patch
virtio-balloon-don-t-start-free-page-hin.patch
virtio-mem-pci-Fix-memory-leak-when-crea.patch
virtio-net-fix-use-after-unmap-free-for-.patch
OBS-URL: https://build.opensuse.org/request/show/941047
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=681
- Update to v6.1: see https://wiki.qemu.org/ChangeLog/6.1
For a full list of formely deprecated features that are removed,
consult: https://qemu-project.gitlab.io/qemu/about/removed-features.html
For a list of new deprecated features, consult:
https://qemu-project.gitlab.io/qemu/about/deprecated.html
Some noteworthy changes:
* Removed moxie CPU.
* Removed lm32 CPU.
* Removed unicore32 CPU.
* Removed 'info cpustats'.
* Added Aspeed machines: rainier-bmc, quanta-q7l1-bmc.
* Added npcm7xx machine: quanta-gbs-bmc.
* Model for Aspeed's Hash and Crypto Engine.
* SVE2 is now emulated, including bfloat16 support
* FEAT_I8MM, FEAT_TLBIOS, FEAT_TLBRANGE, FEAT_BF16, FEAT_AA32BF16, and
FEAT_MTE3 are now emulated.
* Improved hot-unplug failures on PowerPC pseries machine.
* Implemented some POWER10 instructions in TCG.
* Added shakti_c RISC-V machine.
* Improved documentation for RISC-V machines.
* CPU models for gen16 have been added for s390x.
* New CPU model versions added with XSAVES enabled:
Skylake-Client-v4, Skylake-Server-v5, Cascadelake-Server-v5,
Cooperlake-v2, Icelake-Client-v3, Icelake-Server-v5, Denverton-v3,
Snowridge-v3, Dhyana-v2
* Added ACPI based PCI hotplug support to Q35 machine. Enabled and
used by default since pc-q35-6.1 machine type.
* Added support for the pca9546 and pca9548 I2C muxes.
* Added support for PMBus and several PMBus devices.
* Crypto subsystem:
The preferred crypto backend driver now gnutls, with libgcrypt as the
second choice, and nettle as third choice, with ordering driven mostly
by performance of the ciphers.
* Misc doc improvements.
* Patches removed:
block-nvme-Fix-VFIO_MAP_DMA-failed-No-sp.patch
hmp-Fix-loadvm-to-resume-the-VM-on-succe.patch
hw-block-nvme-align-with-existing-style.patch
hw-block-nvme-consider-metadata-read-aio.patch
hw-net-can-sja1000-fix-buff2frame_bas-an.patch
hw-nvme-fix-missing-check-for-PMR-capabi.patch
hw-nvme-fix-pin-based-interrupt-behavior.patch
hw-pci-host-q35-Ignore-write-of-reserved.patch
hw-rdma-Fix-possible-mremap-overflow-in-.patch
hw-rx-rx-gdbsim-Do-not-accept-invalid-me.patch
hw-usb-Do-not-build-USB-subsystem-if-not.patch
hw-usb-host-stub-Remove-unused-header.patch
linux-user-aarch64-Enable-hwcap-for-RND-.patch
module-for-virtio-gpu-pre-load-module-to.patch
monitor-qmp-fix-race-on-CHR_EVENT_CLOSED.patch
pvrdma-Ensure-correct-input-on-ring-init.patch
pvrdma-Fix-the-ring-init-error-flow-CVE-.patch
qemu-config-load-modules-when-instantiat.patch
qemu-config-parse-configuration-files-to.patch
qemu-config-use-qemu_opts_from_qdict.patch
runstate-Initialize-Error-to-NULL.patch
sockets-update-SOCKET_ADDRESS_TYPE_FD-li.patch
target-i386-Exit-tb-after-wrmsr.patch
target-sh4-Return-error-if-CPUClass-get_.patch
tcg-Allocate-sufficient-storage-in-temp_.patch
tcg-arm-Fix-tcg_out_op-function-signatur.patch
tcg-sparc-Fix-temp_allocate_frame-vs-spa.patch
ui-Fix-memory-leak-in-qemu_xkeymap_mappi.patch
usb-hid-avoid-dynamic-stack-allocation.patch
usb-limit-combined-packets-to-1-MiB-CVE-.patch
usb-mtp-avoid-dynamic-stack-allocation.patch
usb-redir-avoid-dynamic-stack-allocation.patch
usbredir-fix-free-call.patch
vfio-ccw-Permit-missing-IRQs.patch
vhost-user-blk-Check-that-num-queues-is-.patch
vhost-user-blk-Don-t-reconnect-during-in.patch
vhost-user-blk-Fail-gracefully-on-too-la.patch
vhost-user-blk-Get-more-feature-flags-fr.patch
vhost-user-blk-Make-sure-to-set-Error-on.patch
vhost-user-gpu-abstract-vg_cleanup_mappi.patch
vhost-user-gpu-fix-leak-in-virgl_cmd_res.patch
vhost-user-gpu-fix-leak-in-virgl_resourc.patch
vhost-user-gpu-fix-memory-disclosure-in-.patch
vhost-user-gpu-fix-memory-leak-in-vg_res.patch
vhost-user-gpu-fix-memory-leak-while-cal.patch
vhost-user-gpu-fix-OOB-write-in-virgl_cm.patch
vhost-user-gpu-fix-resource-leak-in-vg_r.patch
vhost-vdpa-don-t-initialize-backend_feat.patch
virtio-blk-Fix-rollback-path-in-virtio_b.patch
virtio-Fail-if-iommu_platform-is-request.patch
virtiofsd-Fix-side-effect-in-assert.patch
vl-allow-not-specifying-size-in-m-when-u.patch
vl-Fix-an-assert-failure-in-error-path.patch
vl-plug-object-back-into-readconfig.patch
vl-plumb-keyval-based-options-into-readc.patch
x86-acpi-use-offset-instead-of-pointer-w.patch
OBS-URL: https://build.opensuse.org/request/show/914430
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=665
- Fix DoS in e1000 emulated device (CVE-2021-20257 bsc#1182577)
e1000-fail-early-for-evil-descriptor.patch
- Fix incorrect guest data in s390x PCI passthrough (bsc#1183372)
s390x-pci-restore-missing-Query-PCI-Func.patch
- Include upstream patches designated as stable material and
reviewed for applicability to include here
lsilogic-Use-PCIDevice-exit-instead-of-D.patch
vhost-user-blk-fix-blkcfg-num_queues-end.patch
- Fix potential privilege escalation in virtfs (CVE-2021-20181
bsc#1182137)
9pfs-Fully-restart-unreclaim-loop-CVE-20.patch
- Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)
net-vmxnet3-validate-configuration-value.patch
OBS-URL: https://build.opensuse.org/request/show/879536
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=629
- Add #!ForceMultiversion to qemu.spec:
+ As the spec file defines different Version: fiels for various
subpackages, we must instruct OBS to not ever reset the
checkin-counter, as it would by defalut on a version increase.
Resetting the version counter results in sub-packages reusing
their VERSION-RELEASE from the past (e.g. qemu-ipxe is version
1.0.0+, and upon checkin of a new qemu version, RELEASE is
reset to 1.1, thus again producing
qemu-ipxe-1.0.0+-1.1.noarch.rpm.
OBS-URL: https://build.opensuse.org/request/show/878619
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=628
- Add patch from IBM to improve modularization situation on s390
where a new qemu module, hw-s390x-virtio-gpu-ccw.so, and a
corresponding new qemu-hw-s390x-virtio-gpu-ccw subpackage, is
split out (this parallels the hw-display-virtio-gpu-pci.so module).
Split-provides file is also used to track this functionality
splitout. Both the packages supplying the above mentioned modules
now have a Requires on the qemu-hw-display-virtio-gpu package. It
is anticipated that this change is going in upstream as well, and
if done differently the plan is to update to the upstream
implementation if possible (bsc#1181103)
hw-s390x-modularize-virtio-gpu-ccw.patch
OBS-URL: https://build.opensuse.org/request/show/876625
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=624
- Fix issue of virtio-9p-ccw having been mistakenly dropped from
qemu (bsc#1182496)
hw-s390x-fix-build-for-virtio-9p-ccw.patch
- Tweaked some spec file details to be again compatible with quilt
setup using the spec file as input
- Remove BuildRequires that were added in anticipation of building
ovmf within this package. We have not taken that route
OBS-URL: https://build.opensuse.org/request/show/874876
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=619
- Switch the modules qemu-ui-display-gpu and qemu-ui-display-gpu-pci
from being an x86 only Recommends, to a Recommends for all arch's
except s390x (boo#1181350)
- Fix qemu-hw-usb-smartcard to not be a Recommends for s390x
- Minor spec file tweaks for compatibility with upcoming spec file
formatter
- Make note that this patch takes care of an OOB access in ARM
interrupt handling (CVE-2021-20221 bsc#1181933)
hw-intc-arm_gic-Fix-interrupt-ID-in-GICD.patch
OBS-URL: https://build.opensuse.org/request/show/870726
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=615
- Fix issue of qemu crashing (abort called) when virtio-gpu device
is asked for and the qemu-hw-display-virtio-gpu package isn't
installed. (bsc#1181103)
module-for-virtio-gpu-pre-load-module-to.patch
- Add additional inter-module package dependencies, to reflect the
current module dependencies (see qemu source file: util/module.c)
- As of v3.1.0 virt-manager, new VM's are created by default with
audio/sound enabled, so it's time to reflect the need, at least
in the spice case, by having spice-audio available when spice in
general is used (boo#1180210 boo#1181132)
- Further refine package Recommends/Suggests based on architecture
- Remove no longer needed dependency on pwdutils (boo#1181235)
OBS-URL: https://build.opensuse.org/request/show/866169
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=605
- Convert qemu-kvm from a script to a symlink. This method of
invoking the QEMU emulator has been deprecated for some time,
but is still provided. It has as it's origins a version of QEMU
which had KVM acceleration enabled by default. In it's recent
incarnation it is a script which adds '-machine accel=kvm' to the
beginning of the list of command line options passed to the
emulator. This method collides with the now preferred method of
specifying acceleration options by using -accel. qemu-kvm is now
changed to simply be a symlink to the same QEMU binary which the
prior script exec'd. This new approach takes advantage of a built
in QEMU feature where if QEMU is invoked using a program name
ending in 'kvm', KVM emulation is enabled. This approach is
better in that it is more compatible with any other command line
option that may be added for specifying acceleration (not that
you should do that).
For those who have taken advantage of the fact that you can add
additional command line options to the qemu-kvm script, or doing
other things in that script you will just need to create an
alternate script "emulator" to achieve the same. It's possible
that there may be some very subtle behavioral difference in the
switch from a script to a symlink, but given that qemu-kvm is a
deprecated package, we're not going to worry about that.
OBS-URL: https://build.opensuse.org/request/show/862991
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=601
- Fix crash when spice used and the qemu-audio-spice package isn't
installed (boo#1180210)
audio-add-sanity-check.patch
- Add some stable patches from upstream
block-Fix-deadlock-in-bdrv_co_yield_to_d.patch
block-Fix-locking-in-qmp_block_resize.patch
block-nfs-fix-int-overflow-in-nfs_client.patch
block-Simplify-qmp_block_resize-error-pa.patch
build-no-pie-is-no-functional-linker-fla.patch
OBS-URL: https://build.opensuse.org/request/show/860516
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=599
- Update to v5.2.0: See http://wiki.qemu.org/ChangeLog/5.2
Take note that ongoing feature deprecation is tracked at both
http://wiki.qemu-project.org/Features/LegacyRemoval and in
the deprecated.html file installed with the qemu package
Some noteworthy changes:
* Dropped system emulators: qemu-system-lm32, qemu-system-unicore32
* Dropped linux user emulator: qemu-ppc64abi32
* Added linux user emulator: qemu-extensaeb
* Unicore32 and lm32 guest support dropped
* New sub-packages (most due to ongoing modularization of QEMU):
qemu-audio-spice, qemu-hw-chardev-spice, qemu-hw-display-virtio-vga,
qemu-hw-display-virtio-gpu, qemu-hw-display-virtio-gpu-pci,
qemu-ui-spice-core, qemu-ui-opengl, qemu-ivshmem-tools
* x86: A new KVM feature which improves the handling of asynchronous page
faults is available with -cpu ...,kvm-async-pf-int (requires Linux 5.8)
* s390: More instructions emulated under TCG
* PowerPC: nvdimm= machine option now functions correctly; misc improvements
* ARM: new boards: mps2-an386 (Cortex-M4 based) and mps2-an500
(Cortex-M7 based), raspi3ap (the Pi 3 model A+), raspi0 (the Pi Zero)
and raspi1ap (the Pi A+)
* RISC-V: OpenSBI v0.8 included by default; Generic OpenSBI platform used
when no -bios argument is supplied; Support for NUMA sockets on Virt
and Spike Machines; Support for migrating machines; misc improvements
* Misc NVMe improvements
* The 'vhost-user-blk' export type has been added, allowing
qemu-storage-daemon to act as a vhost-user-blk device backend
* The SMBIOS OEM strings can now come from a file
* 9pfs - misc performance related improvements
* virtiofs - misc improvements
* migration: The default migration bandwidth has been increased to 1Gbps
(users are still encouraged to tune it to their own hardware); The new
'calc-dirty-rate' and 'query-dirty-rate' QMP commands can help determine
the likelihood of precopy migration success; TLS+multifd now supported
for higher bandwidth encrypted migration; misc minor features added
* Misc minor block features added
* Misc doc improvements
* qemu-microvm subpackage change: the bios-microvm.bin is now SeaBIOS based,
and the qboot based on is now qboot.rom
* elf2dmp is no longer part of qemu-tools (it was never intended to be
a packaged binary)
* Some subpackages which were 'Requires' are now 'Recommends', allowing for
a smaller qemu packaging footprint if needed
* Patches dropped (included in release tarball, unless otherwise noted):
docs-fix-trace-docs-build-with-sphinx-3..patch (fixed differently)
hw-hyperv-vmbus-Fix-32bit-compilation.patch
linux-user-properly-test-for-infinite-ti.patch
Switch-order-of-libraries-for-mpath-supp.patch (fixed differently)
Conditionalize-ui-bitmap-installation-be.patch (fixed differently)
hw-usb-hcd-xhci-Fix-GCC-9-build-warning.patch (no longer using gcc9)
hw-usb-dev-mtp-Fix-GCC-9-build-warning.patch (no longer using gcc9)
roms-Makefile-enable-cross-compile-for-b.patch (fixed with different patch)
libvhost-user-handle-endianness-as-manda.patch
virtio-add-vhost-user-fs-ccw-device.patch
Fix-s-directive-argument-is-null-error.patch
build-Workaround-compilation-error-with-.patch
build-Be-explicit-about-fcommon-compiler.patch
intel-Avoid-spurious-compiler-warning-on.patch
golan-Add-explicit-type-casts-for-nodnic.patch
Do-not-apply-WORKAROUND_CFLAGS-for-host-.patch
ensure-headers-included-are-compatible-w.patch
Enable-cross-compile-prefix-for-C-compil.patch (fixed differently)
hw-net-net_tx_pkt-fix-assertion-failure-.patch
hw-net-xgmac-Fix-buffer-overflow-in-xgma.patch
s390x-protvirt-allow-to-IPL-secure-guest.patch
usb-fix-setup_len-init-CVE-2020-14364.patch
* Patches added:
meson-install-ivshmem-client-and-ivshmem.patch
Revert-roms-efirom-tests-uefi-test-tools.patch
Makefile-Don-t-check-pc-bios-as-pre-requ.patch
roms-Makefile-add-cross-file-to-qboot-me.patch
qboot-add-cross.ini-file-to-handle-aarch.patch
usb-Help-compiler-out-to-avoid-a-warning.patch
- In spec file, where reasonable, switch BuildRequires: XXX-devel
to be pkgconfig(XXX') instead
- No longer disable link time optimization for qemu for x86. It looks like
either the build service, qemu code changes and/or the switch to meson
have resolved issues previously seen there. We still see problems for
other architectures however.
- For the record, the following issues reported for SUSE SLE15-SP2
are either fixed in this current package, or are otherwise no longer
an issue: bsc#1172384 bsc#1174386 bsc#1174641 bsc#1174863 bsc#1175370
bsc#1175441 bsc#1176494 CVE-2020-13361 CVE-2020-14364 CVE-2020-15863
CVE-2020-16092 CVE-2020-24352
and the following feature requests are satisfied by this package:
jsc#SLE-13689 jsc#SEL-13780 jsc#SLE-13840
- To be more accurate, and to align with other qemu packaging
practices, rename the qemu-s390 package to qemu-s390x. The old
name (in the rpm namespace) is provided with a "Provides"
directive, and an "Obsoletes" done against that name for prior
qemu versions, as is standard practice (boo#1177764 jsc#SLE-17060)
- Take this opportunity to remove some ancient Split-Provides
mechanisms which can't conceivably be needed any more:
qemu-block-curl provided: qemu:%_libdir/%name/block-curl.so
qemu-guest-agent provided: qemu:%_bindir/qemu-ga
qemu-tools provided: qemu:%_libexecdir/qemu-bridge-helper
- Disable linux-user 'ls' test on 32 bit arm. It's failing with
"Allocating guest commpage: Cannot allocate memory" error, which
we should hunt down, but for now we don't want it to prevent the
package from being built
OBS-URL: https://build.opensuse.org/request/show/854151
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=597
- A patch has been applied to virt-manager to handle qemu spice
related modules not being present, so undo the change from Sep
30, 2020. Once again qemu-hw-display-qxl and qemu-hw-usb-redirect
are Recommends and not Required by the qemu package
(boo#1157320 boo#1176517, boo#1178141)
- For jsc#SLE-11629, change qemu, qemu-tools, and qemu-guest-agent
to rely on system-user-qemu and system-group-kvm to provide now
static system UIDs and GID's for qemu user and group, and kvm
group. This will make guest migration more seamless for new
installations since there is no chance of having required ID's
differ in value.
OBS-URL: https://build.opensuse.org/request/show/849129
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=589
