- Runs of the test-suite seem much more stable now, in this version
of QEMU. (bsc#1203610) We are also fine re-enabling running them
in parallel.
- Switch QEMU Linux user to emulate the same CPU as the one of the
host by default. This is a bit conrtoversial and tricky, when
thinking about system emulation/virtualization. But for linux-user,
it should be just fine. (bsc#1203684)
* Patches added:
linux-user-use-max-as-default-CPU-model-.patch
- Be less verbose when packaging documentation. In fact, with just
a couple of (minor) re-arrangements, we can get rid of having to
list all the files all the time
- Package /etc/qemu/bridge.conf as '%config(noreplace). Next step
will probably be to move it to /usr/etc/qemu (bsc#1201944)
- Switch to %autosetup for all products (this required some changes
in update_git.sh)
- Run check-qtest sequentially, as it's more reliable, when in OBS
- Build with libbpf, fdt and capstone support
- Drop the patch adding our support document, and deal with that
in the spec file directly
* Patches dropped:
doc-add-our-support-doc-to-the-main-proj.patch
- Updated to latest upstream version 7.1
* https://wiki.qemu.org/ChangeLog/7.1
Be sure to also check the following pages:
* https://qemu-project.gitlab.io/qemu/about/removed-features.html
* https://qemu-project.gitlab.io/qemu/about/deprecated.html
Some notable changes:
* [x86] Support for architectural LBRs on KVM virtual machines
* [x86] The libopcode-based disassembler has been removed. Use
Capstone instead
* [LoongArch] Add initial support for the LoongArch64 architecture.
* [ARM] The emulated SMMUv3 now advertises support for SMMUv3.2-BBML2
* [ARM] The xlnx-zynqmp SoC model now implements the 4 TTC timers
* [ARM] The versal machine now models the Cortex-R5s in the Real-Time
Processing Unit (RPU) subsystem
* [ARM] The virt board now supports emulation of the GICv4.0
* [ARM] New emulated CPU types: Cortex-A76, Neoverse-N1
* [HPPA] Fix serial port pass-through from host to guest
* [HPPA] Lots of general code improvements and tidy-ups
* [RISC-V] RISC-V
* [RISC-V] Add support for privileged spec version 1.12.0
* [RISC-V] Use privileged spec version 1.12.0 for virt machine by default
* [RISC-V] Allow software access to MIP SEIP
* [RISC-V] Add initial support for the Sdtrig extension
* [RISC-V] Optimisations and improvements for the vector extension
* [VFIO] Experimental support for exposing emulated PCI devices over the
new vfio-user protocol (a vfio-user client is not yet available
in QEMU, though)
* [QMP] The on-cbw-error option for copy-before-write filter, to specify
behavior on CBW (copy before write) operation failure.
* [QMP] The cbw-timeout option for copy-before-write filter, to specify
timeout for CBW operation.
* [QMP] New commands query-stats and query-stats-schema to retrieve
statistics from various QEMU subsystems (right now only from
KVM).
* [QMP] The PanicAction can now be configured to report an exit-failure
(useful for automated testing)
* [Networking] QEMU can be compiled with the system slirp library even
when using CFI. This requires libslirp 4.7.
* [Migration] Support for zero-copy-send on Linux, which reduces CPU
usage on the source host. Note that locked memory is needed
to support this
* Patches added:
Revert-tests-qtest-enable-more-vhost-use.patch
meson-remove-pkgversion-from-CONFIG_STAM.patch
* Patches dropped:
AIO-Reduce-number-of-threads-for-32bit-h.patch
Makefile-Don-t-check-pc-bios-as-pre-requ.patch
Revert-8dcb404bff6d9147765d7dd3e9c849337.patch
Revert-qht-constify-qht_statistics_init.patch
XXX-dont-dump-core-on-sigabort.patch
acpi_piix4-Fix-migration-from-SLE11-SP2.patch
configure-only-populate-roms-if-softmmu.patch
configure-remove-pkgversion-from-CONFIG_.patch
coroutine-ucontext-use-QEMU_DEFINE_STATI.patch
coroutine-use-QEMU_DEFINE_STATIC_CO_TLS.patch
coroutine-win32-use-QEMU_DEFINE_STATIC_C.patch
hostmem-default-the-amount-of-prealloc-t.patch
hw-usb-hcd-ehci-fix-writeback-order.patch
i8254-Fix-migration-from-SLE11-SP2.patch
intc-exynos4210_gic-replace-snprintf-wit.patch
modules-generates-per-target-modinfo.patch
modules-introduces-module_kconfig-direct.patch
pc-bios-s390-ccw-net-avoid-warning-about.patch
pci-fix-overflow-in-snprintf-string-form.patch
qemu-cvs-gettimeofday.patch
qemu-cvs-ioctl_debug.patch
qemu-cvs-ioctl_nodirection.patch
qht-Revert-some-constification-in-qht.c.patch
qom-handle-case-of-chardev-spice-module-.patch
scsi-lsi53c895a-fix-use-after-free-in-ls.patch
scsi-lsi53c895a-really-fix-use-after-fre.patch
softmmu-Always-initialize-xlat-in-addres.patch
sphinx-change-default-language-to-en.patch
test-add-mapping-from-arch-of-i686-to-qe.patch
tests-Fix-block-tests-to-be-compatible-w.patch
tests-qtest-Move-the-fuzz-tests-to-x86-o.patch
usb-Help-compiler-out-to-avoid-a-warning.patch
OBS-URL: https://build.opensuse.org/request/show/1006734
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=732
- Add an audio-oss sub-package
- Add some new (mostly documentation) files in the package
- Remove option --audio-drv-list because audio is detected by
meson automatically in latest version.
- Remove options --disable-jemalloc and --disable-tcmalloc
which are changed in v6.2.0.
- Update to v 6.2.0. For full release notese, see:
* https://wiki.qemu.org/ChangeLog/6.2.
Be sure to also check the following pages:
* https://qemu-project.gitlab.io/qemu/about/removed-features.html
* https://qemu-project.gitlab.io/qemu/about/deprecated.html
Some notable changes:
* virtio-mem: guest memory dumps are now fully supported, along
with pre-copy/post-copy migration and background guest snapshots
* QMP: support for nw DEVICE_UNPLUG_GUEST_ERROR to detect
guest-reported hotplug failures
* TCG: improvements to TCG plugin argument syntax, and multi-core
support for cache plugin
* 68k: improved support for Apple’s NuBus, including ability to
load declaration ROMs, and slot IRQ support
* ARM: macOS hosts with Apple Silicon CPUs now support ‘hvf’
accelerator for AArch64 guests
* ARM: emulation support for Fujitsu A64FX processor model
* ARM: emulation support for kudo-mbc machine type
* ARM: M-profile MVE extension is now supported for Cortex-M55
* ARM: ‘virt’ machine now supports an emulated ITS (Interrupt
Translation Service) and supports more than 123 CPUs in
emulation mode
* ARM: xlnx-zcu102 and xlnx-versal-virt machines now support
BBRAM and eFUSE devices
* PowerPC: improved POWER10 support for the ‘powernv’ machine type
* PowerPC: initial support for POWER10 DD2.0 CPU model
* PowerPC: support for FORM2 PAPR NUMA descriptions for ‘pseries’ machine type
* RISC-V: support for Zb[abcs] instruction set extensions
* RISC-V: support for vhost-user and numa mem options across all boards
* RISC-V: SiFive PWM support
* x86: support for new Snowridge-v4 CPU model
* x86: guest support for Intel SGX
* x86: AMD SEV guests now support measurement of kernel binary when doing
direct kernel boot (not using a bootloader)
* Patches dropped:
9pfs-fix-crash-in-v9fs_walk.patch
block-introduce-max_hw_iov-for-use-in-sc.patch
hmp-Unbreak-change-vnc.patch
hw-acpi-ich9-Add-compat-prop-to-keep-HPC.patch
hw-i386-acpi-build-Deny-control-on-PCIe-.patch
i386-cpu-Remove-AVX_VNNI-feature-from-Co.patch
net-vmxnet3-validate-configuration-value.patch
pcie-rename-native-hotplug-to-x-native-h.patch
plugins-do-not-limit-exported-symbols-if.patch
plugins-execlog-removed-unintended-s-at-.patch
qemu-nbd-Change-default-cache-mode-to-wr.patch
qemu-sockets-fix-unix-socket-path-copy-a.patch
target-arm-Don-t-skip-M-profile-reset-en.patch
target-i386-add-missing-bits-to-CR4_RESE.patch
tcg-arm-Fix-tcg_out_vec_op-function-sign.patch
uas-add-stream-number-sanity-checks.patch
vhost-vsock-fix-migration-issue-when-seq.patch
virtio-balloon-don-t-start-free-page-hin.patch
virtio-mem-pci-Fix-memory-leak-when-crea.patch
virtio-net-fix-use-after-unmap-free-for-.patch
OBS-URL: https://build.opensuse.org/request/show/941047
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=681
- Update to v6.1: see https://wiki.qemu.org/ChangeLog/6.1
For a full list of formely deprecated features that are removed,
consult: https://qemu-project.gitlab.io/qemu/about/removed-features.html
For a list of new deprecated features, consult:
https://qemu-project.gitlab.io/qemu/about/deprecated.html
Some noteworthy changes:
* Removed moxie CPU.
* Removed lm32 CPU.
* Removed unicore32 CPU.
* Removed 'info cpustats'.
* Added Aspeed machines: rainier-bmc, quanta-q7l1-bmc.
* Added npcm7xx machine: quanta-gbs-bmc.
* Model for Aspeed's Hash and Crypto Engine.
* SVE2 is now emulated, including bfloat16 support
* FEAT_I8MM, FEAT_TLBIOS, FEAT_TLBRANGE, FEAT_BF16, FEAT_AA32BF16, and
FEAT_MTE3 are now emulated.
* Improved hot-unplug failures on PowerPC pseries machine.
* Implemented some POWER10 instructions in TCG.
* Added shakti_c RISC-V machine.
* Improved documentation for RISC-V machines.
* CPU models for gen16 have been added for s390x.
* New CPU model versions added with XSAVES enabled:
Skylake-Client-v4, Skylake-Server-v5, Cascadelake-Server-v5,
Cooperlake-v2, Icelake-Client-v3, Icelake-Server-v5, Denverton-v3,
Snowridge-v3, Dhyana-v2
* Added ACPI based PCI hotplug support to Q35 machine. Enabled and
used by default since pc-q35-6.1 machine type.
* Added support for the pca9546 and pca9548 I2C muxes.
* Added support for PMBus and several PMBus devices.
* Crypto subsystem:
The preferred crypto backend driver now gnutls, with libgcrypt as the
second choice, and nettle as third choice, with ordering driven mostly
by performance of the ciphers.
* Misc doc improvements.
* Patches removed:
block-nvme-Fix-VFIO_MAP_DMA-failed-No-sp.patch
hmp-Fix-loadvm-to-resume-the-VM-on-succe.patch
hw-block-nvme-align-with-existing-style.patch
hw-block-nvme-consider-metadata-read-aio.patch
hw-net-can-sja1000-fix-buff2frame_bas-an.patch
hw-nvme-fix-missing-check-for-PMR-capabi.patch
hw-nvme-fix-pin-based-interrupt-behavior.patch
hw-pci-host-q35-Ignore-write-of-reserved.patch
hw-rdma-Fix-possible-mremap-overflow-in-.patch
hw-rx-rx-gdbsim-Do-not-accept-invalid-me.patch
hw-usb-Do-not-build-USB-subsystem-if-not.patch
hw-usb-host-stub-Remove-unused-header.patch
linux-user-aarch64-Enable-hwcap-for-RND-.patch
module-for-virtio-gpu-pre-load-module-to.patch
monitor-qmp-fix-race-on-CHR_EVENT_CLOSED.patch
pvrdma-Ensure-correct-input-on-ring-init.patch
pvrdma-Fix-the-ring-init-error-flow-CVE-.patch
qemu-config-load-modules-when-instantiat.patch
qemu-config-parse-configuration-files-to.patch
qemu-config-use-qemu_opts_from_qdict.patch
runstate-Initialize-Error-to-NULL.patch
sockets-update-SOCKET_ADDRESS_TYPE_FD-li.patch
target-i386-Exit-tb-after-wrmsr.patch
target-sh4-Return-error-if-CPUClass-get_.patch
tcg-Allocate-sufficient-storage-in-temp_.patch
tcg-arm-Fix-tcg_out_op-function-signatur.patch
tcg-sparc-Fix-temp_allocate_frame-vs-spa.patch
ui-Fix-memory-leak-in-qemu_xkeymap_mappi.patch
usb-hid-avoid-dynamic-stack-allocation.patch
usb-limit-combined-packets-to-1-MiB-CVE-.patch
usb-mtp-avoid-dynamic-stack-allocation.patch
usb-redir-avoid-dynamic-stack-allocation.patch
usbredir-fix-free-call.patch
vfio-ccw-Permit-missing-IRQs.patch
vhost-user-blk-Check-that-num-queues-is-.patch
vhost-user-blk-Don-t-reconnect-during-in.patch
vhost-user-blk-Fail-gracefully-on-too-la.patch
vhost-user-blk-Get-more-feature-flags-fr.patch
vhost-user-blk-Make-sure-to-set-Error-on.patch
vhost-user-gpu-abstract-vg_cleanup_mappi.patch
vhost-user-gpu-fix-leak-in-virgl_cmd_res.patch
vhost-user-gpu-fix-leak-in-virgl_resourc.patch
vhost-user-gpu-fix-memory-disclosure-in-.patch
vhost-user-gpu-fix-memory-leak-in-vg_res.patch
vhost-user-gpu-fix-memory-leak-while-cal.patch
vhost-user-gpu-fix-OOB-write-in-virgl_cm.patch
vhost-user-gpu-fix-resource-leak-in-vg_r.patch
vhost-vdpa-don-t-initialize-backend_feat.patch
virtio-blk-Fix-rollback-path-in-virtio_b.patch
virtio-Fail-if-iommu_platform-is-request.patch
virtiofsd-Fix-side-effect-in-assert.patch
vl-allow-not-specifying-size-in-m-when-u.patch
vl-Fix-an-assert-failure-in-error-path.patch
vl-plug-object-back-into-readconfig.patch
vl-plumb-keyval-based-options-into-readc.patch
x86-acpi-use-offset-instead-of-pointer-w.patch
OBS-URL: https://build.opensuse.org/request/show/914430
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=665
- Update to v5.2.0: See http://wiki.qemu.org/ChangeLog/5.2
Take note that ongoing feature deprecation is tracked at both
http://wiki.qemu-project.org/Features/LegacyRemoval and in
the deprecated.html file installed with the qemu package
Some noteworthy changes:
* Dropped system emulators: qemu-system-lm32, qemu-system-unicore32
* Dropped linux user emulator: qemu-ppc64abi32
* Added linux user emulator: qemu-extensaeb
* Unicore32 and lm32 guest support dropped
* New sub-packages (most due to ongoing modularization of QEMU):
qemu-audio-spice, qemu-hw-chardev-spice, qemu-hw-display-virtio-vga,
qemu-hw-display-virtio-gpu, qemu-hw-display-virtio-gpu-pci,
qemu-ui-spice-core, qemu-ui-opengl, qemu-ivshmem-tools
* x86: A new KVM feature which improves the handling of asynchronous page
faults is available with -cpu ...,kvm-async-pf-int (requires Linux 5.8)
* s390: More instructions emulated under TCG
* PowerPC: nvdimm= machine option now functions correctly; misc improvements
* ARM: new boards: mps2-an386 (Cortex-M4 based) and mps2-an500
(Cortex-M7 based), raspi3ap (the Pi 3 model A+), raspi0 (the Pi Zero)
and raspi1ap (the Pi A+)
* RISC-V: OpenSBI v0.8 included by default; Generic OpenSBI platform used
when no -bios argument is supplied; Support for NUMA sockets on Virt
and Spike Machines; Support for migrating machines; misc improvements
* Misc NVMe improvements
* The 'vhost-user-blk' export type has been added, allowing
qemu-storage-daemon to act as a vhost-user-blk device backend
* The SMBIOS OEM strings can now come from a file
* 9pfs - misc performance related improvements
* virtiofs - misc improvements
* migration: The default migration bandwidth has been increased to 1Gbps
(users are still encouraged to tune it to their own hardware); The new
'calc-dirty-rate' and 'query-dirty-rate' QMP commands can help determine
the likelihood of precopy migration success; TLS+multifd now supported
for higher bandwidth encrypted migration; misc minor features added
* Misc minor block features added
* Misc doc improvements
* qemu-microvm subpackage change: the bios-microvm.bin is now SeaBIOS based,
and the qboot based on is now qboot.rom
* elf2dmp is no longer part of qemu-tools (it was never intended to be
a packaged binary)
* Some subpackages which were 'Requires' are now 'Recommends', allowing for
a smaller qemu packaging footprint if needed
* Patches dropped (included in release tarball, unless otherwise noted):
docs-fix-trace-docs-build-with-sphinx-3..patch (fixed differently)
hw-hyperv-vmbus-Fix-32bit-compilation.patch
linux-user-properly-test-for-infinite-ti.patch
Switch-order-of-libraries-for-mpath-supp.patch (fixed differently)
Conditionalize-ui-bitmap-installation-be.patch (fixed differently)
hw-usb-hcd-xhci-Fix-GCC-9-build-warning.patch (no longer using gcc9)
hw-usb-dev-mtp-Fix-GCC-9-build-warning.patch (no longer using gcc9)
roms-Makefile-enable-cross-compile-for-b.patch (fixed with different patch)
libvhost-user-handle-endianness-as-manda.patch
virtio-add-vhost-user-fs-ccw-device.patch
Fix-s-directive-argument-is-null-error.patch
build-Workaround-compilation-error-with-.patch
build-Be-explicit-about-fcommon-compiler.patch
intel-Avoid-spurious-compiler-warning-on.patch
golan-Add-explicit-type-casts-for-nodnic.patch
Do-not-apply-WORKAROUND_CFLAGS-for-host-.patch
ensure-headers-included-are-compatible-w.patch
Enable-cross-compile-prefix-for-C-compil.patch (fixed differently)
hw-net-net_tx_pkt-fix-assertion-failure-.patch
hw-net-xgmac-Fix-buffer-overflow-in-xgma.patch
s390x-protvirt-allow-to-IPL-secure-guest.patch
usb-fix-setup_len-init-CVE-2020-14364.patch
* Patches added:
meson-install-ivshmem-client-and-ivshmem.patch
Revert-roms-efirom-tests-uefi-test-tools.patch
Makefile-Don-t-check-pc-bios-as-pre-requ.patch
roms-Makefile-add-cross-file-to-qboot-me.patch
qboot-add-cross.ini-file-to-handle-aarch.patch
usb-Help-compiler-out-to-avoid-a-warning.patch
- In spec file, where reasonable, switch BuildRequires: XXX-devel
to be pkgconfig(XXX') instead
- No longer disable link time optimization for qemu for x86. It looks like
either the build service, qemu code changes and/or the switch to meson
have resolved issues previously seen there. We still see problems for
other architectures however.
- For the record, the following issues reported for SUSE SLE15-SP2
are either fixed in this current package, or are otherwise no longer
an issue: bsc#1172384 bsc#1174386 bsc#1174641 bsc#1174863 bsc#1175370
bsc#1175441 bsc#1176494 CVE-2020-13361 CVE-2020-14364 CVE-2020-15863
CVE-2020-16092 CVE-2020-24352
and the following feature requests are satisfied by this package:
jsc#SLE-13689 jsc#SEL-13780 jsc#SLE-13840
- To be more accurate, and to align with other qemu packaging
practices, rename the qemu-s390 package to qemu-s390x. The old
name (in the rpm namespace) is provided with a "Provides"
directive, and an "Obsoletes" done against that name for prior
qemu versions, as is standard practice (boo#1177764 jsc#SLE-17060)
- Take this opportunity to remove some ancient Split-Provides
mechanisms which can't conceivably be needed any more:
qemu-block-curl provided: qemu:%_libdir/%name/block-curl.so
qemu-guest-agent provided: qemu:%_bindir/qemu-ga
qemu-tools provided: qemu:%_libexecdir/qemu-bridge-helper
- Disable linux-user 'ls' test on 32 bit arm. It's failing with
"Allocating guest commpage: Cannot allocate memory" error, which
we should hunt down, but for now we don't want it to prevent the
package from being built
OBS-URL: https://build.opensuse.org/request/show/854151
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=597
Update to v4.1.0. Also includes other major packaging changes as follows:
There is a new package maintenance workflow - see README.PACKAGING for details.
The sibling packages qemu-linux-user and qemu-testsuite are now created with the Build Service's MultiBuild feature. This also necessitates combining the qemu-linux-user changelog content back into qemu's. Luckily the delta there is quite small. Note that the qemu spec file is now that much busier, but added section markers should help reduce the confusion. Also qemu is being enabled for RISCV host compatibility, so some changes are related to that as well.
OBS-URL: https://build.opensuse.org/request/show/730437
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=487
José Ricardo Ziviani
Bruce Rogers
