Dario Faggioli
d58941a9c7
- Runs of the test-suite seem much more stable now, in this version of QEMU. (bsc#1203610) We are also fine re-enabling running them in parallel. - Switch QEMU Linux user to emulate the same CPU as the one of the host by default. This is a bit conrtoversial and tricky, when thinking about system emulation/virtualization. But for linux-user, it should be just fine. (bsc#1203684) * Patches added: linux-user-use-max-as-default-CPU-model-.patch - Be less verbose when packaging documentation. In fact, with just a couple of (minor) re-arrangements, we can get rid of having to list all the files all the time - Package /etc/qemu/bridge.conf as '%config(noreplace). Next step will probably be to move it to /usr/etc/qemu (bsc#1201944) - Switch to %autosetup for all products (this required some changes in update_git.sh) - Run check-qtest sequentially, as it's more reliable, when in OBS - Build with libbpf, fdt and capstone support - Drop the patch adding our support document, and deal with that in the spec file directly * Patches dropped: doc-add-our-support-doc-to-the-main-proj.patch - Updated to latest upstream version 7.1 * https://wiki.qemu.org/ChangeLog/7.1 Be sure to also check the following pages: * https://qemu-project.gitlab.io/qemu/about/removed-features.html * https://qemu-project.gitlab.io/qemu/about/deprecated.html Some notable changes: * [x86] Support for architectural LBRs on KVM virtual machines * [x86] The libopcode-based disassembler has been removed. Use Capstone instead * [LoongArch] Add initial support for the LoongArch64 architecture. * [ARM] The emulated SMMUv3 now advertises support for SMMUv3.2-BBML2 * [ARM] The xlnx-zynqmp SoC model now implements the 4 TTC timers * [ARM] The versal machine now models the Cortex-R5s in the Real-Time Processing Unit (RPU) subsystem * [ARM] The virt board now supports emulation of the GICv4.0 * [ARM] New emulated CPU types: Cortex-A76, Neoverse-N1 * [HPPA] Fix serial port pass-through from host to guest * [HPPA] Lots of general code improvements and tidy-ups * [RISC-V] RISC-V * [RISC-V] Add support for privileged spec version 1.12.0 * [RISC-V] Use privileged spec version 1.12.0 for virt machine by default * [RISC-V] Allow software access to MIP SEIP * [RISC-V] Add initial support for the Sdtrig extension * [RISC-V] Optimisations and improvements for the vector extension * [VFIO] Experimental support for exposing emulated PCI devices over the new vfio-user protocol (a vfio-user client is not yet available in QEMU, though) * [QMP] The on-cbw-error option for copy-before-write filter, to specify behavior on CBW (copy before write) operation failure. * [QMP] The cbw-timeout option for copy-before-write filter, to specify timeout for CBW operation. * [QMP] New commands query-stats and query-stats-schema to retrieve statistics from various QEMU subsystems (right now only from KVM). * [QMP] The PanicAction can now be configured to report an exit-failure (useful for automated testing) * [Networking] QEMU can be compiled with the system slirp library even when using CFI. This requires libslirp 4.7. * [Migration] Support for zero-copy-send on Linux, which reduces CPU usage on the source host. Note that locked memory is needed to support this * Patches added: Revert-tests-qtest-enable-more-vhost-use.patch meson-remove-pkgversion-from-CONFIG_STAM.patch * Patches dropped: AIO-Reduce-number-of-threads-for-32bit-h.patch Makefile-Don-t-check-pc-bios-as-pre-requ.patch Revert-8dcb404bff6d9147765d7dd3e9c849337.patch Revert-qht-constify-qht_statistics_init.patch XXX-dont-dump-core-on-sigabort.patch acpi_piix4-Fix-migration-from-SLE11-SP2.patch configure-only-populate-roms-if-softmmu.patch configure-remove-pkgversion-from-CONFIG_.patch coroutine-ucontext-use-QEMU_DEFINE_STATI.patch coroutine-use-QEMU_DEFINE_STATIC_CO_TLS.patch coroutine-win32-use-QEMU_DEFINE_STATIC_C.patch hostmem-default-the-amount-of-prealloc-t.patch hw-usb-hcd-ehci-fix-writeback-order.patch i8254-Fix-migration-from-SLE11-SP2.patch intc-exynos4210_gic-replace-snprintf-wit.patch modules-generates-per-target-modinfo.patch modules-introduces-module_kconfig-direct.patch pc-bios-s390-ccw-net-avoid-warning-about.patch pci-fix-overflow-in-snprintf-string-form.patch qemu-cvs-gettimeofday.patch qemu-cvs-ioctl_debug.patch qemu-cvs-ioctl_nodirection.patch qht-Revert-some-constification-in-qht.c.patch qom-handle-case-of-chardev-spice-module-.patch scsi-lsi53c895a-fix-use-after-free-in-ls.patch scsi-lsi53c895a-really-fix-use-after-fre.patch softmmu-Always-initialize-xlat-in-addres.patch sphinx-change-default-language-to-en.patch test-add-mapping-from-arch-of-i686-to-qe.patch tests-Fix-block-tests-to-be-compatible-w.patch tests-qtest-Move-the-fuzz-tests-to-x86-o.patch usb-Help-compiler-out-to-avoid-a-warning.patch OBS-URL: https://build.opensuse.org/request/show/1006734 OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=732
42 lines
1.7 KiB
Diff
42 lines
1.7 KiB
Diff
From: Olaf Hering <olaf@aepfle.de>
|
|
Date: Tue, 8 Jan 2019 14:20:08 +0100
|
|
Subject: xen: ignore live parameter from xen-save-devices-state
|
|
|
|
References: bsc#1079730, bsc#1101982, bsc#1063993
|
|
|
|
The final step of xl migrate|save for an HVM domU is saving the state of
|
|
qemu. This also involves releasing all block devices. While releasing
|
|
backends ought to be a separate step, such functionality is not
|
|
implemented.
|
|
|
|
Unfortunately, releasing the block devices depends on the optional
|
|
'live' option. This breaks offline migration with 'virsh migrate domU
|
|
dom0' because the sending side does not release the disks, as a result
|
|
the receiving side can not properly claim write access to the disks.
|
|
|
|
As a minimal fix, remove the dependency on the 'live' option. Upstream
|
|
may fix this in a different way, like removing the newly added 'live'
|
|
parameter entirely.
|
|
|
|
Fixes: 5d6c599fe1 ("migration, xen: Fix block image lock issue on live migration")
|
|
|
|
Signed-off-by: Olaf Hering <olaf@aepfle.de>
|
|
Signed-off-by: Bruce Rogers <brogers@suse.com>
|
|
---
|
|
migration/savevm.c | 2 +-
|
|
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
|
|
diff --git a/migration/savevm.c b/migration/savevm.c
|
|
index 48e85c052c2c0197405803b9ef83..58eea0775eaa78d5d0250cdcbcaf 100644
|
|
--- a/migration/savevm.c
|
|
+++ b/migration/savevm.c
|
|
@@ -2950,7 +2950,7 @@ void qmp_xen_save_devices_state(const char *filename, bool has_live, bool live,
|
|
* So call bdrv_inactivate_all (release locks) here to let the other
|
|
* side of the migration take control of the images.
|
|
*/
|
|
- if (live && !saved_vm_running) {
|
|
+ if (!saved_vm_running) {
|
|
ret = bdrv_inactivate_all();
|
|
if (ret) {
|
|
error_setg(errp, "%s: bdrv_inactivate_all() failed (%d)",
|