Dario Faggioli
5f7cc8fe5e
- Substantial rework of the spec file:
* the 'make check' testsuite now runs in the %check section of
the main package, not in a subpackage
* switched from %setup to %autosetup
* rearranged the content in order to minimize the use of %if,
%ifarch, etc
- Properly fix bsc#1198038, CVE-2022-0216
* Patches added:
scsi-lsi53c895a-really-fix-use-after-fre.patch
tests-qtest-Move-the-fuzz-tests-to-x86-o.patch
- Make temp dir (for update_git.sh) configurable
- Added new subpackages (audio-dbus, ui-dbus)
- bsc#1199018 was never fixed in Factory's QEMU 6.2. It is
now (since the patches are already in SeaBIOS 1.16.0)
- Some tests are having issues when run in OBS. They seem to be
due to race conditions, triggered by resource constraints of
OBS workers. Let's disable them for now, while looking for a fix
- Update to v7.0.0. For full release notese, see:
* https://wiki.qemu.org/ChangeLog/7.0
Be sure to also check the following pages:
* https://qemu-project.gitlab.io/qemu/about/removed-features.html
* https://qemu-project.gitlab.io/qemu/about/deprecated.html
Some notable changes:
* [ARM] The virt board has gained a new control knob to disable passing a RNG seed in the DTB (dtb-kaslr-seed)
* [ARM] The AST2600 SoC now supports a dummy version of the i3c device
* [ARM] The virt board can now run guests with KVM on hosts with restricted IPA ranges
* [ARM] The virt board now supports virtio-mem-pci
* [ARM] The virt board now supports specifying the guest CPU topology
* [ARM] On the virt board, we now enable PAuth when using KVM or hvf and the host CPU supports it
* [RISC-V] Add support for ratified 1.0 Vector extension
* [RISC-V] Support for the Zve64f and Zve32f extensions
* [RISC-V] Drop support for draft 0.7.1 Vector extension
* [RISC-V] Support Zfhmin and Zfh extensions
* [RISC-V] RISC-V KVM support
* [RISC-V] Mark Hypervisor extension as non experimental
* [RISC-V] Enable Hypervisor extension by default
* [x86] Support for Intel AMX.
* [PCI/PCIe] Q35: fix PCIe device becoming disabled after migration when ACPI based PCI hotplug is used (6b0969f1ec)
* [PCI/PCIe] initial bits of SR/IOV support (250346169)
* [PCI/PCIe] arm/virt: fixed PXB interrupt routing (e609301b45)
* [PCI/PCIe] arm/virt: support for virtio-mem-pci (b1b87327a9)
* [virtiofs] Fix for CVE-2022-0358 - behaviour with supplementary groups and SGID directories
* [virtiofs] Improved security label support
* [virtiofs] The virtiofsd in qemu is now starting to be deprecated; please start using and contributing to Rust virtiofsd
* Patches dropped:
acpi-validate-hotplug-selector-on-access.patch
block-backend-Retain-permissions-after-m.patch
block-qdict-Fix-Werror-maybe-uninitializ.patch
brotli-fix-actual-variable-array-paramet.patch
display-qxl-render-fix-race-condition-in.patch
doc-Add-the-SGX-numa-description.patch
hw-i386-amd_iommu-Fix-maybe-uninitialize.patch
hw-intc-exynos4210_gic-provide-more-room.patch
hw-nvme-fix-CVE-2021-3929.patch
hw-nvram-at24-return-0xff-if-1-byte-addr.patch
iotest-065-explicit-compression-type.patch
iotest-214-explicit-compression-type.patch
iotest-302-use-img_info_log-helper.patch
iotest-303-explicit-compression-type.patch
iotest-39-use-_qcow2_dump_header.patch
iotests-60-more-accurate-set-dirty-bit-i.patch
iotests-bash-tests-filter-compression-ty.patch
iotests-common.rc-introduce-_qcow2_dump_.patch
iotests-declare-lack-of-support-for-comp.patch
iotests-drop-qemu_img_verbose-helper.patch
iotests-massive-use-_qcow2_dump_header.patch
iotests-MRCE-Write-data-to-source.patch
iotests.py-filter-out-successful-output-.patch
iotests.py-img_info_log-rename-imgopts-a.patch
iotests.py-implement-unsupported_imgopts.patch
iotests.py-qemu_img-create-support-IMGOP.patch
iotests.py-rewrite-default-luks-support-.patch
iotests-specify-some-unsupported_imgopts.patch
meson-build-all-modules-by-default.patch
numa-Enable-numa-for-SGX-EPC-sections.patch
numa-Support-SGX-numa-in-the-monitor-and.patch
python-aqmp-add-__del__-method-to-legacy.patch
python-aqmp-add-_session_guard.patch
python-aqmp-add-SocketAddrT-to-package-r.patch
python-aqmp-add-socket-bind-step-to-lega.patch
python-aqmp-add-start_server-and-accept-.patch
python-aqmp-copy-type-definitions-from-q.patch
python-aqmp-drop-_bind_hack.patch
python-aqmp-fix-docstring-typo.patch
python-aqmp-Fix-negotiation-with-pre-oob.patch
python-aqmp-fix-race-condition-in-legacy.patch
Python-aqmp-fix-type-definitions-for-myp.patch
python-aqmp-handle-asyncio.TimeoutError-.patch
python-aqmp-refactor-_do_accept-into-two.patch
python-aqmp-remove-_new_session-and-_est.patch
python-aqmp-rename-accept-to-start_serve.patch
python-aqmp-rename-AQMPError-to-QMPError.patch
python-aqmp-split-_client_connected_cb-o.patch
python-aqmp-squelch-pylint-warning-for-t.patch
python-aqmp-stop-the-server-during-disco.patch
python-introduce-qmp-shell-wrap-convenie.patch
python-machine-raise-VMLaunchFailure-exc.patch
python-move-qmp-shell-under-the-AQMP-pac.patch
python-move-qmp-utilities-to-python-qemu.patch
python-qmp-switch-qmp-shell-to-AQMP.patch
python-support-recording-QMP-session-to-.patch
python-upgrade-mypy-to-0.780.patch
qcow2-simple-case-support-for-downgradin.patch
qemu-binfmt-conf.sh-should-use-F-as-shor.patch
tests-qemu-iotests-040-Skip-TestCommitWi.patch
tests-qemu-iotests-Fix-051-for-binaries-.patch
tests-qemu-iotests-testrunner-Quote-case.patch
tools-virtiofsd-Add-rseq-syscall-to-the-.patch
ui-cursor-fix-integer-overflow-in-cursor.patch
vhost-vsock-detach-the-virqueue-element-.patch
virtiofsd-Drop-membership-of-all-supplem.patch
virtio-net-fix-map-leaking-on-error-duri.patch
Disable-some-tests-that-have-problems-in.patch
* Patches added:
intc-exynos4210_gic-replace-snprintf-wit.patch
Revert-8dcb404bff6d9147765d7dd3e9c849337.patch
------------------------------------------------------------------
- Fix bsc#1197084
* Patches added:
hostmem-default-the-amount-of-prealloc-t.patch
- Get rid of downstream patches breaking s390 modules. Replace
them with the upstream proposed and Acked (but never committed)
solution (bsc#1199015)
* Patches added:
modules-generates-per-target-modinfo.patch
modules-introduces-module_kconfig-direct.patch
* Patches dropped:
Fix-the-module-building-problem-for-s390.patch
modules-quick-fix-a-fundamental-error-in.patch
- backport patches for having coroutine work well when LTO is used
* Patches added:
coroutine-ucontext-use-QEMU_DEFINE_STATI.patch
coroutine-use-QEMU_DEFINE_STATIC_CO_TLS.patch
coroutine-win32-use-QEMU_DEFINE_STATIC_C.patch
- seabios: drop patch that changes python in python2.
Just go to python3 directly.
* Patches dropped:
seabios-use-python2-explicitly-as-needed.patch
OBS-URL: https://build.opensuse.org/request/show/990667
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=726
33 lines
1.5 KiB
Diff
33 lines
1.5 KiB
Diff
From: Bruce Rogers <brogers@suse.com>
|
|
Date: Fri, 17 Apr 2020 13:07:37 -0600
|
|
Subject: configure: remove $pkgversion from CONFIG_STAMP input to broaden
|
|
compatibility
|
|
|
|
As part of the effort to close the gap with Leap I think we are fine
|
|
removing the $pkgversion component to creating a unique CONFIG_STAMP.
|
|
This stamp is only used in creating a unique symbol used in ensuring the
|
|
dynamically loaded modules correspond correctly to the loading qemu.
|
|
The default inputs to producing this unique symbol are somewhat reasonable
|
|
as a generic mechanism, but specific packaging and maintenance practices
|
|
might require the default to be modified for best use. This is an example
|
|
of that.
|
|
|
|
Signed-off-by: Bruce Rogers <brogers@suse.com>
|
|
---
|
|
configure | 2 +-
|
|
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
|
|
diff --git a/configure b/configure
|
|
index a35b63b2106900e6f7ff46d2b8da..b031106ff395bf5092348780dbb6 100755
|
|
--- a/configure
|
|
+++ b/configure
|
|
@@ -2823,7 +2823,7 @@ echo "TARGET_DIRS=$target_list" >> $config_host_mak
|
|
if test "$modules" = "yes"; then
|
|
# $shacmd can generate a hash started with digit, which the compiler doesn't
|
|
# like as an symbol. So prefix it with an underscore
|
|
- echo "CONFIG_STAMP=_$( (echo $qemu_version; echo $pkgversion; cat $0) | $shacmd - | cut -f1 -d\ )" >> $config_host_mak
|
|
+ echo "CONFIG_STAMP=_$( (echo $qemu_version; cat $0) | $shacmd - | cut -f1 -d\ )" >> $config_host_mak
|
|
echo "CONFIG_MODULES=y" >> $config_host_mak
|
|
fi
|
|
if test "$module_upgrades" = "yes"; then
|