- Update to version 2.0.0

If the Python adblock library is available, it is now used to
integrate Brave's Rust adblocker library for improved adblocking
based on ABP-like filter lists (such as EasyList).
If it is unavailable, qutebrowser falls back to host-blocking,
i.e. the same blocking technique it used before this release.
As part of this, various settings got renamed, see "Changed"
below.
Note: If the adblock dependency is available, qutebrowser will
ignore custom host blocking via the blocked-hosts config file or
file:/// URLs supplied as host blocking lists. You will need to
either migrate those to ABP-like lists, or set
content.blocking.method to "both".
Note for openSUSE users: The adblock library has not been packaged
yet due to the difficulty of packaging its Rust dependencies.
Removed
* The --enable-webengine-inspector flag (which was only needed for
  Qt 5.10 and below) is now dropped. With Qt 5.11 and newer, the
  inspector/devtools are enabled unconditionally.
* Support for moving qutebrowser data from versions before v1.0.0
  has been removed.
* The --old flag for :config-diff has been removed. It used to show
  customized options for the old pre-v1.0 config files (in order to
  aid migration to v1.0).
* The :inspector command which was deprecated in v1.13.0 (in favor
  of :devtools) is now removed.
Deprecated
* Several commands have been renamed for consistency and/or easier
  grouping of related commands. Their old names are still
  available, but deprecated and will be removed in qutebrowser

OBS-URL: https://build.opensuse.org/package/show/network/qutebrowser?expand=0&rev=102

qutebrowser-1.14.1.tar.gz

@@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:554c145ff64b1a92d4f53e3c624aaad51baafb7cb5b469bc815ae2e0e1958796
-size 4161759

qutebrowser-1.14.1.tar.gz.asc

@@ -1,16 +0,0 @@
------BEGIN PGP SIGNATURE-----
-
-iQIzBAABCAAdFiEE4E5WAAJAG47w528KkW6wyP1VoHIFAl/KjtQACgkQkW6wyP1V
-oHKbMw//YJ9WNQdfZKhSJf4g5k+m473bhrV50b0gTYTc974owTMukt+hNs4Iomho
-l9ocCuBODk+UDw6iPHkWfxnkQg2gFEBu2qV9DMvYbshfDMotbiqTxyzio5uvm7Mf
-0bcijHAnnKwMbzKeMd73zFmrnWUUrK8TzEFPp9+n+a7RXIrt/+RndXagYs4DY1BL
-e2NyEKX5ZDmNO4fB7LhReoLs7MWxTs6oZW+NG4YN6RP46p4M0RSfbXepblAWVrQ4
-OFMw6DYQH/ywHHLw3Sd0z9RX9ddPcUhW9gGq94VpGZ9ObH7uxl97xHKOhFepL1d5
-nBBB8HEbGIiSa7a3hfA619Idn0ZXtc6OZbotYJz6gJXP8RiDkCqFVXgi0tFjXeMv
-LpzSyUl3UKZ6k8bhZC2ZqKkk2zUW8tnxVjnbCrKZOnL2++vUj8HVtJCzXWxD0bkC
-v2ljM8g2ysb8WWIOAj3M5ecyK8FiucQ1fWvOG176ivWeu+ZED1g+mNahpIwZrMqv
-dwv8mVly0GnrPB47JQFkUWtHMcJQRnu4H6xpylDdROvgALE7+c4ls3jjhxVZd9Fp
-hcWXKIb4UvG9d5ASQMmzXnHse32maPWHLWmAjP2GAuI9n0wJrkJ7zCl19ZLSq6vb
-/7rYbmChMA5f7+FAJGRfAV+AvJAVvMALMt+RSC9wt/g9uRcq+2Y=
-=QQYa
------END PGP SIGNATURE-----

qutebrowser-2.0.0.tar.gz

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:bfa1336ec91f3bda946fa2e0634a6931763ae5948e33c3311bd7450fe1fc1c16
+size 6181421

qutebrowser-2.0.0.tar.gz.asc

@@ -0,0 +1,16 @@
+-----BEGIN PGP SIGNATURE-----
+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+=nnjo
+-----END PGP SIGNATURE-----

qutebrowser.changes

@@ -1,3 +1,250 @@
+-------------------------------------------------------------------
+Thu Jan 28 09:01:57 UTC 2021 - Mia Herkt <mia@0x0.st>
+
+- Update to version 2.0.0
+If the Python adblock library is available, it is now used to
+integrate Brave's Rust adblocker library for improved adblocking
+based on ABP-like filter lists (such as EasyList).
+If it is unavailable, qutebrowser falls back to host-blocking,
+i.e. the same blocking technique it used before this release.
+As part of this, various settings got renamed, see "Changed"
+below.
+Note: If the adblock dependency is available, qutebrowser will
+ignore custom host blocking via the blocked-hosts config file or
+file:/// URLs supplied as host blocking lists. You will need to
+either migrate those to ABP-like lists, or set
+content.blocking.method to "both".
+Note for openSUSE users: The adblock library has not been packaged
+yet due to the difficulty of packaging its Rust dependencies.
+
+Removed
+* The --enable-webengine-inspector flag (which was only needed for
+  Qt 5.10 and below) is now dropped. With Qt 5.11 and newer, the
+  inspector/devtools are enabled unconditionally.
+* Support for moving qutebrowser data from versions before v1.0.0
+  has been removed.
+* The --old flag for :config-diff has been removed. It used to show
+  customized options for the old pre-v1.0 config files (in order to
+  aid migration to v1.0).
+* The :inspector command which was deprecated in v1.13.0 (in favor
+  of :devtools) is now removed.
+
+Deprecated
+* Several commands have been renamed for consistency and/or easier
+  grouping of related commands. Their old names are still
+  available, but deprecated and will be removed in qutebrowser
+  v2.1.0.
+  + run-macro -> macro-run
+  + record-macro -> macro-record
+  + buffer -> tab-select
+  + open-editor -> edit-text
+  + toggle-selection -> selection-toggle
+  + drop-selection -> selection-drop
+  + reverse-selection -> selection-reverse
+  + follow-selected -> selection-follow
+  + follow-hint -> hint-follow
+  + enter-mode -> mode-enter
+  + leave-mode -> mode-leave
+
+Added
+* New settings for the ABP-based adblocker:
+  + content.blocking.method to decide which blocker(s) should be
+    used.
+  + content.blocking.adblock.lists to configure ABP-like lists to
+    use.
+* New qt.environ setting which makes it easier to set/unset
+  environment variables for qutebrowser.
+* New settings to use an external file picker (such as ranger or
+  vifm):
+  + fileselect.handler (default or external)
+  + fileselect.multiple_files.command
+  + fileselect.single_file.command
+* When QtWebEngine has been updated but PyQtWebEngine hasn't yet,
+  the dark mode settings might stop working. As a (currently
+  undocumented) escape hatch, this version adds a
+  QUTE_DARKMODE_VARIANT=qt_515_2 environment variable which can be
+  set to get the correct behavior in (transitive) situations like
+  this.
+* New --desktop-file-name commandline argument, which can be used
+  to customize the desktop filename passed to Qt (which is used to
+  set the app_id on Wayland).
+* The :open completion now also completes local file paths and
+  file:// URLs, via a new filesystem entry in
+  completion.open_categories. Also, a new completion.favorite_paths
+  setting was added which can be used to add paths to show when
+  :open is used without any input.
+* New QUTE_VERSION variable for userscripts, which can be used to
+  read qutebrowser's version.
+* New "Copy URL" entry in the context menu for downloads.
+* New :bookmark-list command which lists all bookmarks/quickmarks.
+  The corresponding qute://bookmarks URL already existed since
+  v0.8.0, but it was never exposed as a command.
+* New qt.workarounds.remove_service_workers setting which can be
+  used to remove the "Service Workers" directory on every start.
+  Usage of this option is generally discouraged, except in
+  situations where the underlying QtWebEngine bug is a known cause
+  for crashes.
+* Changelogs are now shown after qutebrowser was upgraded.
+  By default, the changelog is only shown after minor upgrades
+  (feature releases) but not patch releases. This can be adjusted
+  (or disabled entirely) via a new changelog_after_upgrade setting.
+* New userscripts:
+  + kodi to play videos in Kodi
+  + qr to generate a QR code of the current URL
+  + add-nextcloud-bookmarks to create bookmarks in Nextcloud's
+    Bookmarks app
+  + add-nextcloud-cookbook to add recipes to Nextcloud's Cookbook
+    app
+
+Changed
+* config.py files now are required to have either
+  config.load_autoconfig(False) (don't load autoconfig.yml) or
+  config.load_autoconfig() (do load autoconfig.yml) in them.
+* Various host-blocking settings have been renamed to accomodate
+  the new ABP-like adblocker:
+  + content.host_blocking.enabled -> content.blocking.enabled
+    (controlling both blockers)
+  + content.host_blocking.whitelist -> content.blocking.whitelist
+    (controlling both blockers)
+  + content.host_blocking.lists -> content.blocking.hosts.lists
+* Changes to default settings:
+  + tabs.background is now true by default, so that new tabs get
+    opened in the background.
+  + input.partial_timeout is now set to 0 by default, so that
+    partially typed key strings are never cleared.
+  + hints.leave_on_load is now false by default, so that hint mode
+    doesn't get left when a page finishes loading. This can lead to
+    stale hints persisting in rare circumstances, but is better
+    than leaving hint mode when the user entered it before loading
+    was completed.
+  + The default for tabs.width (tab bar width if vertical) is now
+    15% of the window width rather than 20%.
+  + The default bindings for moving tabs
+    (tab-move - and tab-move +) were changed from gl and gr to gK
+    and gJ, to be consistent with the tab switching bindings.
+  + The text color for warning messages is now black instead of
+    white, for increased contrast and thus readability.
+  + The default timeout for messages is now raised from 2s to 3s.
+* On the first start, the history completion database is
+  regenerated to remove a few problematic entries (such as long
+  qute://pdfjs URLs). This might take a couple of minutes, but is
+  a one-time operation. This should result in a performance
+  improvement for the completion for affected users.
+* qutebrowser now shows an error if its history database version is
+  newer than expected. This currently should never happen, but
+  allows for potentially backwards-incompatible changes in future
+  versions.
+* At least Python 3.6.1 is now required to run qutebrowser, support
+  for Python 3.5 (and 3.6.0) is dropped. Note that Python 3.5 is
+  no longer supported upstream since September 2020.
+* At least Qt/PyQt 5.12 is now required to run qutebrowser, support
+  for 5.7 to 5.11 (inclusive) is dropped.
+* New optional dependency on the Python adblock library (see above
+  for details).
+* The (formerly optional) cssutils dependency is now removed.
+  It was only needed for improved behavior in corner cases when
+  using :download --mhtml with the (non-default) QtWebKit backend,
+  and as such it's unlikely anyone is still relying on it.
+  The cssutils project is also dead upstream, with its repository
+  being gone after Bitbucket removed Mercurial support.
+* The (formerly required) pygments dependency is now optional.
+  It is only used when using :view-source with QtWebKit, or when
+  forcing it via :view-source --pygments on QtWebEngine. If it is
+  unavailable, an unhighlighted fallback version of the page's
+  source is shown.
+* The former runtime dependency on the pkg_resources module (part
+  of the setuptools project) got dropped. Note that setuptools is
+  still required to run setup.py.
+* A new dependency on the importlib_resources module got introduced
+  for Python versions up to and including 3.8. Note that the stdlib
+  importlib.resources module for Python 3.7 and 3.8 is missing the
+  needed APIs, thus requiring the backports for those versions as
+  well.
+* The former dependency on the attrs/attr package is now dropped in
+  favour of dataclasses in the Python standard library. On Python
+  3.6, a new dependency on the dataclasses backport is now
+  required.
+* The former dependency on the pypeg2 package is now dropped. This
+  might cause some changes for certain corner-cases for suggested
+  filenames when downloading files with the QtWebKit backend.
+* The colors.webpage.darkmode.* settings are now also supported
+  with older Qt versions (Qt 5.12 and 5.13) rather than just with
+  Qt 5.14 and above.
+* For regexes in the config (hints.{prev,next}_regexes), certain
+  patterns which will change meanings in future Python versions are
+  now disallowed. This is the case for character sets starting with
+  a literal [ or containing literal character sequences --, &&, ~~,
+  or ||. To avoid a warning, remove the duplicate characters or
+  escape them with a backslash.
+* If prompt(..., "default") is used via JS, the default text is now
+  pre-selected in the prompt shown by qutebrowser.
+* URLs such as ::1/foo are now handled as a search term or local
+  file rather than IPv6. Use [::1]/foo to force parsing as IPv6
+  instead.
+* The mkvenv.py script now runs a "smoke test" after setting up the
+  virtual environment to ensure it's working as expected. If
+  necessary, the test can be skipped via a new --skip-smoke-test
+  flag.
+* Both qutebrowser userscripts and Greasemonkey scripts are now
+  additionally picked up from qutebrowser's config directory
+  (the userscripts and greasemonkey subdirectories of e.g.
+  ~/.config/qutebrowser/) rather than only the data directory
+  (the same subdirectories of e.g. ~/.local/share/qutebrowser/).
+* The :later command now understands a time specification like 5m
+  or 1h5m2s, rather than just taking milliseconds.
+* The importer.py script doesn't use a browser argument anymore;
+  instead its --input-format switch can be used to configure the
+  input format. The help also was expanded to explain how to use
+  it properly.
+* If tabs.tabs_are_windows is set, the tabs.last_close setting is
+  now ignored and the window is always closed when using
+  :close (d).
+* With the (default) QtWebEngine backend, if a custom accept header
+  is set via content.headers.custom, the custom value is now
+  ignored for XHR (XMLHttpRequest) requests. Instead, the sent
+  value is now */* or the header set from JavaScript, as it would
+  be if content.headers.custom wasn't set.
+* The :tab-select completion now shows the underlying renderer
+  process PID if doing so is supported (on QtWebEngine 5.15).
+* If tabs.favicons.show is set to never, favicons aren't
+  unnecessarily downloaded anymore. Thus, disabling favicons can
+  help with a possible fingerprinting vector.
+* "Super" is now understood as a modifier (i.e. as alias to
+  "Meta").
+* Initial support for Python 3.10 (currently in Alpha stage).
+* Various performance improvements, including for the startup time.
+
+Fixed
+* With interpolated color settings (colors.tabs.indicator.* and
+  colors.downloads.*), the alpha channel is now handled correctly.
+* Fixes to userscripts:
+  + format_json now uses env in its shebang, making it work
+    correctly on systems where bash isn't located in /bin.
+  + qute-pass now handles the MIME output format introduced in
+    gopass 1.10.0.
+  + qute-lastpass now types multiple < or > characters correctly.
+* The :undo completion now sorts its entries correctly (by the
+  numerical index rather than lexicographically).
+* The completion.web_history.ignore setting now works properly when
+  set in config.py (rather than via :set). Additionally, a
+  :config-source will not result in a history rebuild if the value
+  wasn't actually changed.
+* When downloading a data: URL, the suggested filename is now
+  improved and contains a proper extension. Before this fix,
+  qutebrowser would use the URL's data contents as filename with
+  QtWebEngine; or "binary blob" with the Qt network stack.
+* When :tab-only is run before a tab is available, an error is now
+  shown instead of crashing.
+* A couple of long URLs (such as qute://pdfjs URLs) are now not
+  added to the history database anymore.
+* A bug in QtWebEngine 5.15.2 causes "renderer process killed"
+  errors on websites like LinkedIn and TradingView. There is now a
+  workaround in qutebrowser to prevent this from happening.
+* Nextcloud Calendars started using String.replaceAll which was
+  only added to Chromium recently (Chrome 85), so won't work with
+  current QtWebEngine versions. This release includes a workaround
+  (a polyfill as a site-specific-quirk).
+
 -------------------------------------------------------------------
 Sun Dec  6 08:23:53 UTC 2020 - Mia Herkt <mia@0x0.st>
 

qutebrowser.spec

@@ -1,7 +1,7 @@
 #
 # spec file for package qutebrowser
 #
-# Copyright (c) 2020 SUSE LLC
+# Copyright (c) 2021 SUSE LLC
 #
 # All modifications and additions to the file contributed by third parties
 # remain the property of their copyright owners, unless otherwise agreed
@@ -17,7 +17,7 @@
 
 
 Name:           qutebrowser
-Version:        1.14.1
+Version:        2.0.0
 Release:        0
 Summary:        Keyboard-driven vim-like browser based on Qt5
 License:        GPL-3.0-or-later
@@ -29,41 +29,44 @@ Source2:        %{name}.keyring
 BuildRequires:  asciidoc
 BuildRequires:  fdupes
 BuildRequires:  hicolor-icon-theme
+BuildRequires:  python >= 3.6.1
 BuildRequires:  python3-Jinja2
 BuildRequires:  python3-MarkupSafe
 BuildRequires:  python3-PyYAML
-BuildRequires:  python3-Pygments
-BuildRequires:  python3-attrs
 BuildRequires:  python3-devel >= 3.6
-BuildRequires:  python3-pyPEG2
+BuildRequires:  python3-qt5 >= 5.12
-BuildRequires:  python3-qt5 >= 5.2
+BuildRequires:  python3-setuptools
-%if 0%{suse_version} >= 1550
-BuildRequires:  python3-qt5-sip
-%else
-BuildRequires:  python3-sip
-%endif
 Requires:       libqt5-sql-sqlite
 Requires:       python3-Jinja2
 Requires:       python3-MarkupSafe
 Requires:       python3-PyYAML
-Requires:       python3-Pygments
-Requires:       python3-attrs
 Requires:       python3-opengl
-Requires:       python3-pyPEG2
+Requires:       python3-qt5 >= 5.12
-Requires:       python3-qt5 >= 5.2
+Recommends:     python3-Pygments
+Recommends:     python3-adblock
+BuildArch:      noarch
+%if 0%{?suse_version} >= 1550
+BuildRequires:  python3-qt5-sip
+%else
+BuildRequires:  python3-sip
+%endif
 %if 0%{?suse_version} > 1500
 Requires:       python3-qtwebengine-qt5
 %endif
-%if 0%{suse_version} >= 1550
+%if 0%{?suse_version} >= 1550
 Requires:       python3-qt5-sip
 %else
 Requires:       python3-sip
 %endif
-Recommends:     python3-cssutils
-BuildArch:      noarch
 %if 0%{?suse_version} <= 1320
 BuildRequires:  update-desktop-files
 %endif
+%if %{python3_version_nodots} <= 38
+Requires:       python3-importlib-resources
+%endif
+%if %{python3_version_nodots} == 36
+Requires:       python3-dataclasses
+%endif
 
 %description
 qutebrowser is a keyboard-focused browser with a minimal GUI.
@@ -72,7 +75,7 @@ It's based on PyQt5 and can use either QtWebEngine or QtWebKit.
 %prep
 %setup -q
 sed -i '1d' %{name}/__main__.py
-sed -i 's,^#!/usr/bin/env ,#!/usr/bin/,' \
+sed -i 's,^#!/usr/bin/env ,#!%{_bindir}/,' \
     misc/userscripts/* \
     scripts/*.py
 sed -i 's,^#!/usr/bin/bash,#!/bin/bash,' \