------------------------------------------------------------------- Thu Sep 6 15:08:28 UTC 2018 - Marcus Rueckert - replace some duplicate binaries with symlinks similar to what the fedora package does ------------------------------------------------------------------- Fri Aug 17 00:33:26 UTC 2018 - ilya@ilya.pp.ua - Refresh spec-file. - Update to 4.0.11 * https://raw.githubusercontent.com/antirez/redis/4.0.11/00-RELEASENOTES * The disconnection time between the master and slave was reset in an incorrect place, sometimes a good slave will not be able to failover because it claims it was disconnected for too much time from the master. * A replication bug, rare to trigger but non impossible, is in Redis for years. It was lately discovered at Redis Labs and fixed by Oran Agra. It may cause disconnections, desynchronizations and other issues. * RANDOMKEY may go in infinite loop on rare situations. Now fixed. * EXISTS now works in a more consistent way on slaves. * Sentinel: backport of an option to deny a potential security problem when the SENTINEL command is used to configure an arbitrary script to execute. ------------------------------------------------------------------- Wed Jul 11 17:08:01 UTC 2018 - bwiedemann@suse.com - Add reproducible.patch to have fixed hostname and date (boo#1047218) ------------------------------------------------------------------- Fri Jun 15 10:17:06 UTC 2018 - mrueckert@suse.de - update to 4.0.10 (boo#1097430) CVE-2018-11218 CVE-2018-11219 https://raw.githubusercontent.com/antirez/redis/4.0.10/00-RELEASENOTES - Important security issues related to the Lua scripting engine. Please check https://github.com/antirez/redis/issues/5017 for more information. - A bug with SCAN, SSCAN, HSCAN and ZSCAN, that may not return all the elements. We also add a regression test that can trigger the issue often when present, and may in theory be able to find unrelated regressions. - A PSYNC2 bug is fixed: Redis should not expire keys when saving RDB files because otherwise it is no longer possible to use such RDB file as a base for partial resynchronization. It no longer represents the right state. - Compatibility of AOF with RDB preamble when the RDB checksum is disabled. - Sentinel bug that in some cases prevented Sentinel to detect that the master was down immediately. A delay was added to the detection. - refreshed patches to apply cleanly again redis-conf.patch redis-initscript.patch ------------------------------------------------------------------- Tue Apr 17 16:13:17 UTC 2018 - guillaume.gardet@opensuse.org - Update redis-enable-bactrace-on-x86-and-ia64-only.patch to handle arm and rename it to redis-enable-bactrace-on-x86-ia64-and_arm32_only.patch - Add redis-disable_integration_logging.patch to disable logging test when backtrace is not enabled ------------------------------------------------------------------- Thu Apr 12 13:13:49 UTC 2018 - ilya@ilya.pp.ua - Update to 4.0.9 * https://raw.githubusercontent.com/antirez/redis/4.0.9/00-RELEASENOTES * Critical upgrade for users using AOF with the fsync policy set to "always". * Latency monitor could report wrong latencies under certain conditions. * AOF rewriting could fail when a backgronud rewrite is triggered and at the same time the AOF is switched on/off. * Redis Cluster crash-recovery safety improved. * Redis Cluster has now the ability to configure certain slaves so that they'll never attempt a failover. * Keyspace notifications API in modules. * RM_Call() is now faster by reusing the same client. * Tracking of the percentage of keys already logically expired but yet not evicted. ------------------------------------------------------------------- Thu Feb 8 23:23:58 UTC 2018 - ilya@ilya.pp.ua - Update to 4.0.8 * Release notes: https://raw.githubusercontent.com/antirez/redis/4.0.8/00-RELEASENOTES * Fix crash Redis Cluster instances during deletions. ------------------------------------------------------------------- Sun Jan 28 15:24:25 UTC 2018 - ilya@ilya.pp.ua - Update to 4.0.7 * Release notes: https://raw.githubusercontent.com/antirez/redis/4.0.7/00-RELEASENOTES * Many 32 bit overflows were addressed in order to allow to use Redis with a very significant amount of data, memory size permitting. * MEMORY USAGE fixed for the list type. * Allow read-only scripts in Redis Cluster. * Fix AOF pipes setup in edge case. * AUTH option for MIGRATE. * HyperLogLogs are no longer converted from sparse to dense in order to be merged. * Fix AOF rewrite dead loop under edge cases. * Fix processing of large bulk strings (>= 2GB). * Added RM_UnlinkKey in modules API. * Fix Redis Cluster crashes when certain commands with a variable number of arguments are called in an improper way. * Fix memory leak in lazyfree engine. * Fix many potentially successful partial synchronizations that end doing a full SYNC, because of a bug destroying the replication backlog on the slave. So after a failover the slave was often not able to PSYNC with masters, and a full SYNC was triggered. The bug only happened after 1 hour of uptime so escaped the unit tests. * Improve anti-affinity in master/slave allocation for Redis Cluster when the cluster is created. * Improve output buffer handling for slaves, by not limiting the amount of writes a slave could receive. ------------------------------------------------------------------- Thu Jan 4 15:47:48 UTC 2018 - ilya@ilya.pp.ua - Update to 4.0.6 * Release notes: https://raw.githubusercontent.com/antirez/redis/4.0.6/00-RELEASENOTES * PSYNC2: More errors in the fixes for PSYNC2 (CRITICAL). * Quicklist: change the len of quicklist to unsigned long. * Quicklist: fix the return value of quicklistCount. * Refactoring: improve luaCreateFunction() API. * Remove useless variable check from luaCreateFunction(). * Fix issue #4505, Lua RDB AUX field loading of existing scripts. * Regression test for #4505 (Lua AUX field loading). * DEBUG change-repl-id implemented. * Buffer overflows occurring reading redis.conf CVE-2017-15047 (bsc#1061967) ------------------------------------------------------------------- Wed Nov 1 09:01:44 UTC 2017 - mpluskal@suse.com - Update changelog with CVE reference ------------------------------------------------------------------- Sun Oct 8 15:22:54 UTC 2017 - ilya@ilya.pp.ua - Drop SLE 11 support. - Refresh spec-file. - Update to 4.0.2 * Release notes: https://raw.githubusercontent.com/antirez/redis/4.0.2/00-RELEASENOTES * Different replication fixes to PSYNC2, the new 4.0 replication engine. * Modules thread safe contexts were introduced. They are an experimental API right now, but the API is considered to be stable and usable when needed. * SLOWLOG now logs the offending client name and address. Note that this is a backward compatibility breakage in case old code assumes that the slowlog entry is composed of exactly three entries. * The modules native data types RDB format changed. * The AOF check utility is now able to deal with RDB preambles. * GEORADIUS_RO and GEORADIUSBYMEMBER_RO variants, not supporting the STORE option, were added in order to allow read-only scaling of such queries. * HSET is now variadic, and HMSET is considered deprecated (but will be supported for years to come). Please use HSET in new code. * GEORADIUS huge radius (>= ~6000 km) corner cases fixed, certain elements near the edges were not returned. * DEBUG DIGEST modules API added. * HyperLogLog commands no longer crash on certain input (non HLL) strings. * Fixed SLAVEOF inside MULTI/EXEC blocks. * Many other minor bug fixes and improvements. ------------------------------------------------------------------- Wed Jun 21 16:28:36 UTC 2017 - chris@computersalat.de - cleanup service file - add redis.sysctl file - update README.SUSE * add info for socket usage per service * add info for limits per service (LimitNOFILE=10240) ------------------------------------------------------------------- Thu May 18 12:43:42 UTC 2017 - vsistek@suse.com - Update to version 3.2.9 * A few rarely harmful bugs were fixed. - Changes accumulated from 3.2.8 Two important bug fixes, the first of one is critical: * Apparently Jemalloc 4.4.0 may contain a deadlock under particular conditions. See https://github.com/antirez/redis/issues/3799. We reverted back to the previously used Jemalloc versions and plan to upgrade Jemalloc again after having more info about the cause of the bug. * MIGRATE could crash the server after a socket error. See for reference: https://github.com/antirez/redis/issues/3796. ------------------------------------------------------------------- Wed Feb 1 12:33:53 UTC 2017 - mpluskal@suse.com - Update to version 3.2.7 * This release fixes important security and correctness issues (boo#1064980 CVE-2016-10517) ------------------------------------------------------------------- Fri Jan 20 10:29:19 UTC 2017 - rmaliska@suse.com - update to redis 3.2.6 * fixes for GEORADIUS, BITFIELD and Redis Cluster minor fixes. - update 3.2.5 * This release only fixes a compilation issue due to the missing -ldl at linking time. ------------------------------------------------------------------- Mon Oct 24 08:39:02 UTC 2016 - astieger@suse.com - update to redis 3.2.4, including fixes for security issues: * CVE-2016-8339: CONFIG SET client-output-buffer-limit Code Execution Vulnerability [boo#1002351] - bug fixes: * TCP binding bug fixed when only certain addresses were available for a given port * improved crash report * Fix for Redis Cluster redis-trib displaying of info after creating a new cluster. ------------------------------------------------------------------- Fri Aug 5 18:17:24 UTC 2016 - astieger@suse.com - redis 3.2.3: * fix replication delay issue * drop CVE-2013-7458.patch, upstream ------------------------------------------------------------------- Sat Jul 30 12:30:02 UTC 2016 - jengelh@inai.de - Test for user/group existence before creating them. Request shadow to be present for the scriptlet. ------------------------------------------------------------------- Sat Jul 30 10:06:22 UTC 2016 - astieger@suse.com - Fix CVE-2013-7458: unsafe permissions of command line history boo#991250, adding CVE-2013-7458.patch ------------------------------------------------------------------- Sat Jul 30 09:59:59 UTC 2016 - astieger@suse.com - redis 3.2.2 - Highlight bug fixes: * Fix Redis server and Sentinel crashes * Fix GEORADIUS errors in reported entries - New features: * slaves support the slave-announce-ip and slave-announce-port options. * RDB check utlity is now part of Redis and uses the same RDB code * redis-check-dump utility is now able to show certain information about the RDB file including creating version and date. ------------------------------------------------------------------- Wed Jun 29 12:14:42 UTC 2016 - rmaliska@suse.com - Update to 3.2.1 * [FIX] Cleaned up spec file. * [FIX] Critical bug in Sentinel was hopefully fixed. * [FIX] BITFIELD bugs fixed. * [FIX] GEO commands fixes on syntax errors and edge cases. * [NEW] RESOTRE now accepts dumps generated by older Redis versions. * [NEW] Jemalloc now is configured to save you memory, for a problem a change in the jemalloc configuration did not really survived when the 3.2.0 release was finalized. * [NEW] TTL and TYPE command no longer alter the last access time of a key, for LRU evictions purposes. A new TOUCH command was introduced *just* to update the access time of a key. * [FIX] A bug was fixed in redis-cli, that connected to the instance running on the port 6379 if there was one, regardless of what was specified. * [NEW] TCP keep alive is now enabled by default. This should fix most ghost connections problems without resulting in any practical change in otherwise sane deployments. * [FIX] A Sentinel crash that could happen during failovers was fixed. * [NEW] avg_ttl reporting in INFO improved. * [NEW] Sentinel: improve handling of known Sentinel instances. * [NEW] Redis Cluster address update (via gossip section) processing improved to avoid initiating inwanted handshakes. * [FIX] Critical bug fixed: There was a problem in the way a cluster instance loaded the AOF that could cause data written via scripts to be lost during reshardings. * [NEW] There is a new very powerful BITFIELD command. Check the documentation here: http://redis.io/commands/BITFIELD * [NEW] CONFIG GET is allowed during the loading of the dataset. * [NEW] The DEBUG command have new features and can show an help with DEBUG HELP. * [NEW] redis-cli show hits about the commands arguments to the right. * [NEW] GEORADIUS got a STORE / STOREDIST option to store the result into a target key (as as orted set) instead of reporting it to the user. * [NEW] Redis Cluster replicas migration now works in a slightly different way. In the past a slave could migrate only to a master that used to have slaves in the past (and if there was still trace of this information). Now instead if a new slave gets at least a slot, and at least one other master in the cluster has a slave, then the new master is considered a valid target for replica migration. So if it will be orphaned and there is a spare slave it will get one. * [NEW] CLUSTER SLOTS output now includes the node ID (in a backward compatible manner). ------------------------------------------------------------------- Wed Apr 20 16:53:03 UTC 2016 - mamorales@suse.com - Fix installation example in README.SUSE ------------------------------------------------------------------- Wed Feb 17 12:17:41 UTC 2016 - eshmarnev@suse.com - Update to 3.0.7: * [FIX] Many fixes to MIGRATE multiple keys implementation. * [FIX] A Redis Cluster node crash was fixed because of wrong handling of node->slaveof pointers. * [FIX] Fix redis-trib rebalance when nodes need to be left empty because the specified weight is zero. * [FIX] MIGRATE: Never send -ASK redirections for MIGRATE when there are * [FIX] Lua debugger crash when printing too deeply nested objects. * [FIX] Redis-cli implementation of Lua debugging now allows to use the SCRIPT DEBUG command directly, switching to debugging mode as needed. * [FIX] Redis-trib is now able to fix more errors. A new CLUSTER subcommand called BUMPEPOCH was introduced in order to support new modes for the "fix" subcommand. * [NEW] Redis proctected mode: this feature improves Redis security and makes harder to run Redis in a configuration that is unsecure because no firewalling was used in order to protect Redis from external accesses. * [NEW] Cluster/Sentinel tests now use OSX leak to perform leak detection at the end of every unit. * [NEW] Detect and show server crashes during Cluster/Sentinel tests. * [NEW] More reliable Cluster/Sentinel test becuase of timing errors and -LOADING errors. * [FIX] lua_struct.c/getnum security issue fixed. * [FIX] Redis Cluster replica migration fixed. * [FIX] Fix a race condition in processCommand() because of interactions with freeMemoryIfNeeded(). * [NEW] Backported from the upcoming Redis 3.2: MIGRATE now supports an extended multiple-keys pipelined mode, which is an order of magnitude faster. Redis Cluster now uses this mode in order to perform reshardings and rebalancings. * [NEW] Backported from the upcoming Redis 3.2: Redis Cluster has now support for rebalancing via the redis-trib rebalance command. Demo here: * [NEW] Redis Cluster redis-trib.rb new "info" subcommand. * [NEW] Redis Cluster tests improved. * [NEW] Log offending memory access address on SIGSEGV/SIGBUS ------------------------------------------------------------------- Sun Nov 22 09:18:54 UTC 2015 - mpluskal@suse.com - Update to 3.0.5 * [FIX] MOVE now moves the TTL as well. A bug lasting forever... finally fixed thanks to Andy Grunwald that reported it. * [FIX] Fix a false positive in HSTRLEN test. * [FIX] Fix a bug in redis-cli --pipe mode that was not able to read back replies from the server incrementally. Now a mass import will use a lot less memory, and you can use --pipe to do incremental streaming. * [FIX] Slave detection of master timeout. * [NEW] Cluster: redis-trib fix can fix an additional case for opens lots. * [NEW] Cluster: redis-trib import support for --copy and --replace options ------------------------------------------------------------------- Thu Sep 24 22:26:22 UTC 2015 - mrueckert@suse.de - update to 3.0.4 Upgrade urgency: HIGH for Redis and Sentinel. However note that in order to fix certain replication bugs, the replication internals were modified in a very heavy way. So while this release is conceptually saner, it may contain regressions. For this reason, before the release, QA activities were performed by me (antirez) and Redis Labs and no evident bug was found. - [FIX] A number of bugs related to replication PSYNC and the (yet experimental) diskless replication feature were fixed. The bugs could lead to inconsistency between masters and slaves. (Salvatore Sanfilippo, Oran Agra fixed the issue found by Yuval Inbar) - [FIX] A replication bug in the context of PSYNC partial resynchonization was found and fixed. This bug happens even when diskless replication is off in the case different slaves connect at different times while the master is creating an RDB file, and later a partial resynchronization is attempted by a slave that connected not as the first one. (Salvatore Sanfilippo, Oran Agra) - [FIX] Chained replication and PSYNC interactions leading to potential stale chained slaves data set, see issue #2694. (Salvatore Sanfilippo fixed an issue reported by "GeorgeBJ" user at Github) - [FIX] redis-cli --scan iteration fixed when returned cursor overflows 32 bit signed integer. (Ofir Luzon, Yuval Inbar) - [FIX] Sentinel: fixed a bug during the master switch process, where for a failed conditional check, the new configuration is rewritten, during a small window of time, in a corrupted way where the master is also reported to be one of the slaves. This bug is rare to trigger but apparently it happens in the wild, and the effect is to see a replication loop where the master will try to replicate with itself. A detailed explanation of the bug and its effects can be found in the commit message here: https://github.com/antirez/redis/commit/c20218eb5770b2cafb12bc7092313b8358fedc0a. The bug was found by Jan-Erik Rediger using a static analyzer and fixed by Salvatore Sanfilippo. - [FIX] Sentinel lack of arity checks for certain commands. (Rogerio Goncalves, Salvatore Sanfilippo) - [NEW] Replication internals rewritten in order to be more resistant to bugs. The replication handshake in the slave side was rewritten as a non blocking state machine. (Salvatore Sanfilippo, Oran Agra) - [NEW] New "replication capabilities" feature introduced in order to signal from the master to the slave what are the features supported, so that the master can choose the kind of replication to start (diskless or not) when master and slave are of different versions. (Oran Agra, Salvatore Sanfilippo) - [NEW] Log clients details when SLAVEOF command is received. (Salvatore Sanfilippo with inputs from Nick Craver and Marc Gravell). ------------------------------------------------------------------- Mon Sep 7 17:42:22 UTC 2015 - mrueckert@suse.de - update to 3.0.3 * [FIX] Fix blocking operations timeout precision when HZ is at its default value (not increased) and there are thousands of clients connected at the same time. This bug affected Sidekiq users that experienced a very long delay for BLPOP and similar commands to return for timeout. Check commit b029ff1 for more info. (Salvatore Sanfilippo) * [FIX] MIGRATE "creating socket: Invalid argument" error fix. Check issues #2609 and #2612 for more info. (Salvatore Sanfilippo) * [FIX] Be able to connect to the master even when the slave is bound to just the loopback interface and has no valid public address in the network the master is reacahble. (Salvatore Sanfilippo) * [FIX] ZADD with options encoding promotion fixed. (linfangrong) * [FIX] Reset aof_delayed_fsync on CONFIG RESETSTATS. (Tom Kiemes) * [FIX] PFCOUNT key parsing in cluster fixed. (MOON_CLJ) * [FIX] Fix Solaris compilation of Redis 3.0. (Jan-Erik Rediger) * [NEW] Variadic EXISTS command. Now the command accepts multiple arguments and returns the total count of existing keys. - added missing sentinel link ------------------------------------------------------------------- Mon Jun 15 11:07:16 UTC 2015 - mrueckert@suse.de - also pass the bind address to the redis-cli for shutdown (boo#835815) ------------------------------------------------------------------- Sun Jun 7 02:25:12 UTC 2015 - mrueckert@suse.de - update to 3.0.2 * [FIX] Critical security issue fix by Ben Murphy: http://t.co/LpGTyZmfS7 * [FIX] SMOVE reply fixed when src and dst keys are the same. (Glenn Nethercutt) * [FIX] Lua cmsgpack lib updated to support str8 type. (Sebastian Waisbrot) * [NEW] ZADD support for options: NX, XX, CH. See new doc at redis.io. (Salvatore Sanfilippo) * [NEW] Senitnel: CKQUORUM and FLUSHCONFIG commands back ported. (Salvatore Sanfilippo) ------------------------------------------------------------------- Sat May 16 22:03:00 UTC 2015 - Led - update to 3.0.1 * Sentinel memory leak due to hiredis fixed. * Sentinel memory leak on duplicated instance. * Redis crash on Lua reaching output buffer limits. * Sentinel flushes config on +slave events. ------------------------------------------------------------------- Thu Apr 2 11:07:42 UTC 2015 - mrueckert@suse.de - update to 3.0.0 >> What's new in Redis 3.0 compared to Redis 2.8? * Redis Cluster: a distributed implementation of a subset of Redis. * New "embedded string" object encoding resulting in less cache misses. Big speed gain under certain work loads. * AOF child -> parent final data transmission to minimize latency due to "last write" during AOF rewrites. * Much improved LRU approximation algorithm for keys eviction. * WAIT command to block waiting for a write to be transmitted to the specified number of slaves. * MIGRATE connection caching. Much faster keys migraitons. * MIGARTE new options COPY and REPLACE. * CLIENT PAUSE command: stop processing client requests for a specified amount of time. * BITCOUNT performance improvements. * CONFIG SET accepts memory values in different units (for example you can use "CONFIG SET maxmemory 1gb"). * Redis log format slightly changed reporting in each line the role of the instance (master/slave) or if it's a saving child log. * INCR performance improvements. >> Refactoring changes (no new features nor bug fixes) * Blocking operations full refactoring (blocked.c) * Client output buffer memory tracking refactored. for all the details see /usr/share/doc/packages/redis/00-RELEASENOTES - refreshed redis-enable-bactrace-on-x86-and-ia64-only.patch to apply cleanly ------------------------------------------------------------------- Wed Apr 1 16:31:16 UTC 2015 - mrueckert@suse.de - make sure we do not daemonize ------------------------------------------------------------------- Wed Apr 1 15:57:59 UTC 2015 - mrueckert@suse.de - finished systemd support ------------------------------------------------------------------- Mon Mar 30 19:16:52 UTC 2015 - mrueckert@suse.de - update to 2.8.19 - Don't log admin commands in MONITOR. (antirez) - List of commands flagged as admin commands modified. (antirez) - Lua cmsgpack lib updated to latest version. (antirez) - Add symlink to redis-sentinel during make install (Rhommel Lamas) - SORT: Don't sort Set elements if not needed. (antirez) - Fix zero-ordering SORT when called against lists (Matt Stancliff) - Update redis_init_script.tpl (Ben Dowling) - FIXED redis-benchmark's idle mode.With idle mode shouldn't create write event (zhanghailei) - zipmap.c: update comments above (Sun He) - replaced // comments #2150 (Deepak Verma) - redis-benchmark AUTH command to be discarded after the first send #2150 (azure provisioned user) - sds.c: Correct two spelling mistakes in comments (Sun He) - sds.c/sdscatvprintf: set va_end to finish va_list cpy (Sun He) - sds.c: Correct some comments (Sun He) - Update whatisdoing.sh (Serghei Iakovlev) - Include stropts only if __sun is defined. (antirez) - Fix implicit declaration of ioctl on Solaris (Jan-Erik Rediger) - Silence _BSD_SOURCE warnings in glibc 2.20 and forward (Johan Bergström) - Mark whatisdoing.sh as deprecated in top-comment. (antirez) - getting pid fixes (Serghei Iakovlev) - sparkline.c: AddSample skip Empty label (Sun He) - sparkline.c: mov label-ini into the AddSample Function (Sun He) - Only ignore sigpipe in interactive mode (Jan-Erik Rediger) - Simplify lua_cmsgpack macro and fix build on old Linux distros. (antirez) ------------------------------------------------------------------- Thu Feb 12 07:41:34 UTC 2015 - lang@b1-systems.de - redis requires sudo for the systemv-init script. As of openSUSE 13.2 sudo is not implicitly included in the dependency tree. ------------------------------------------------------------------- Sat Dec 6 02:20:25 UTC 2014 - mrueckert@suse.de - update to 2.8.18 * [FIX] Linenoise updated to be more VT100 compatible. (Salvatore Sanfilippo) * [FIX] A number of typos fixed inside comments. (Various authors) * [FIX] redis-cli no longer quits after long timeouts. (Matt Stancliff) * [FIX] Test framework improved to detect never terminating scripts, cleanup instances on crashes. (Salvatore Sanfilippo) * [FIX] PFCOUNT can be used on slaves now. (Salvatore Sanfilippo) * [FIX] ZSCAN no longer report very small scores as 0. (Matt Stancliff, Michael Grunder, Salvatore Sanfilippo) * [FIX] Don't show the ASCII logo if syslog is enabled. Redis is now an Enterprise Grade product. (Salvatore Sanfilippo) * [NEW] EXPERIMENTAL: Diskless replication, for more info check the doc at http://redis.io/topics/replication. (Salvatore Sanfilippo). * [NEW] Transparent Huge Pages detection and reporting in logs and LATENCY DOCTOR output. (Salvatore Sanfilippo) * [NEW] Many Lua scripting enhancements: Bitops API, cjson upgrade and tests, cmsgpack upgrade. (Matt Stancliff) * [NEW] Total and instantaneous Network bandwidth tracking in INFO. * [NEW] DEBUG POPULATE two args form implemented (old form still works). The second argument is the key prefix. Default is "key:" (Salvatore Sanfilippo) * [NEW] Check that tcp-backlog is matched by /proc/sys/net/core/somaxconn, and warn about it if not. (Salvatore Sanfilippo) for the rest see /usr/share/doc/packages/redis/00-RELEASENOTES ------------------------------------------------------------------- Sun Nov 09 23:34:00 UTC 2014 - Led - fix bashisms in pre script ------------------------------------------------------------------- Mon Jul 28 09:10:30 UTC 2014 - mrueckert@suse.de - remove unused skip-aof-test.patch ------------------------------------------------------------------- Fri Jul 25 14:58:33 UTC 2014 - mrueckert@suse.de - update to 2.8.13 * [FIX] CLIENT KILL minor backward compatibility fixes. (Salvatore Sanfilippo) * [FIX] Enable HAVE_ATOMIC for PowerPC. (Matt Stancliff) * [FIX] More robust PSYNC and AOF rewrites tests. (Salvatore Sanfilippo) * [FIX] Solaris build fixed. (Matt Stancliff, Salvatore Sanfilippo) * [NEW] The new latency monitoring feature, as documented at http://redis.io/topics/latency-monitor (Salvatore Sanfilippo) * [NEW] The COMMAND command, exposing the Redis command table as an API. (Matt Stancliff) * [NEW] Update used memory with C11 __atomic. (Matt Stancliff) - additional changes from 2.8.12 * [FIX / BREAKS BACKWARD COMPATIBILITY] Using SELECT inside Lua scripts no longer makes the selected DB to be set in the calling client. So Lua can still use SELECT, but the client calling the script will remain set to the original DB. Thix fixes an issue with Redis replication of Lua scripts that called SELECT without reverting the selected DB to the original one. (Salvatore Sanfilippo) * [FIX] Sentinel failover was instalbe if the master was detected as available during the failover (especially during manual failovers) because of an implementation error (lack of checking of SRI_PROMOTED flag). (Salvatore Sanfilippo) * [FIX] Cancel SHUTDOWN if initial AOF is being written. (Matt Stancliff) * [FIX] Sentinel: bind source address for outcoming connections. (Matt Stancliff). * [FIX] Less timing sensitive Sentinel tests. (Salvatore Sanfilippo). * [NEW] redis-cli --intrinsic-latency stopped with SIGINT still reports stats (Matt Stancliff) * [NEW] Sentinels broadcast an HELLO message ASAP after a failover in order to reach a consistent state faster (before it relied for periodic HELLO messages). (Salvatore Sanfilippo). * [NEW] Jemalloc updated to 3.6.0. (Salvatore Sanfilippo) * [NEW] CLIENT LIST speedup. (Salvatore Sanfilippo) * [NEW] CLIENT LIST new unique incremental ID to every client. (Salvatore Sanfilippo) * [NEW] ROLE command added. (Salvatore Sanfilippo) * [NEW] CLIENT KILL new form to kill by client type and ID (see doc at redis.io for more info). (Salvatore Sanfilippo) * [NEW] Sentinel now disconnects clients when instances are reconfigured (see http://redis.io/topics/sentinel-clients). (Salvatore Sanfilippo) * [NEW] Hiredis update to latest version. (Matt Stancliff) - additional changes from 2.8.11 # UPGRADE URGENCY: HIGH if you use Lua scripting, LOW otherwise. * [FIX] A previous fix for Lua -> Redis numerical precision enhancement introduced a new problem. In Redis 2.8.10 commands called from Lua passing a string that "looks like" a very large number, may actually use as argument the string converted as a float. This bug is now fixed. * [FIX] Now commands other than *PUSH* adding elements to a list will be able to awake clients blocked in a blocking POP operation. * [FIX] Cygwin compilation fixes. - additional changes from 2.8.10 # UPGRADE URGENCY: HIGH if you use min-slaves-to-write option. * [FIX] IMPORTANT! A min-slaves-to-write option active in a slave totally prevented the slave from acception the master stream of commands. This release includes testes for min-slaves-to-write, and a fix for this issue. * [FIX] Sometimes DEL returned 1 for already expired keys. Fixed. * [FIX] Fix test false positive because new osx 'leaks' output. * [FIX] PFCOUNT HLL cache invalidation fixed: no wrong value was reported but the cache was not used at all, leading to lower performances. * [FIX] Accept(2) multiple clients per readable-event invocation, and better processing of I/O while loading or busy running a timedout script. Basically now the LOADING / BUSY errors are reported at a decent speed. * [FIX] A softwaer watchdog crash fixed. * [FIX] Fixed a Lua -> Redis numerical precision loss. * [NEW] Lua scripting engine speed improved. * [NEW] Sentinel generates one new event for humans to understand better what is happening during a failover: +config-update-from. Also the time at which a failover will be re-attempted is logged. - additional changes from 2.8.9 # UPGRADE URGENCY: LOW, only new features introduced, no bugs fixed. * [NEW] The HyperLogLog data structure. You can read more about it in this blog post. http://antirez.com/news/75 * [NEW] The Sorted Set data type has now support for lexicographic range queries, check the new commands ZRANGEBYLEX, ZLEXCOUNT and ZREMRANGEBYLEX, which are documented at http://redis.io. - additional changes from 2.8.8 # UPGRADE URGENCY: HIGH for Redis, LOW for Sentinel. There is a potentially critical bug fix causing data loss in Redis but it requires a combination of disk full and the use of the SHUTDOWN command. * [FIX] Fixed data loss when SHUTDOWN was used with a disk full condition. * [FIX] Fixed a memory leak in the SORT syntax error processing. * [FIX] When Sentinel down-after-milliseconds parameter is modified at runtime now it gets propagated to all the slaves and sentinel instances of the master. * [FIX] `install_server.sh` script finally fixed. * [FIX] Different fixes to maxclients handling. * [NEW] Sentinels are now able to send update messages in a peer-to-peer fashion even if no Redis instances are available. Now the Sentinel liveness property that the most updated configuration in a given partition is propagated to all the Sentinels is extended to partitions without reachable instances. * [NEW] Sentinel safety properties are now ensured in a crash-recovery system model since some state is persisted on disk before replying to other nodes, and reloaded at startup. * [NEW] Sentinel now uses CLIENT SETNAME so that it is easy to identify Sentinels using CLIENT LIST among other clients. * [NEW] Sentinel failure detection and reconnection code improved. * [NEW] Use all 24 bits (instead of 22) for the Redis objects LRU field. Note that the new LRU algorithm using eviction pools was not backported from unstable for safery / code maturity concerns. * [NEW] Majory speedup for the INFO command (it is now 6 times faster). * [NEW] More Sentinel unit tests. * [NEW] New command DEBUG ERROR returns the specified error. Example: DEBUG ERROR "LOADING database". This is handy to write Redis client libraries unit tests. * [NEW] redis-cli now supports multi-line editing via updated linenoise lib. Thanks to Matt Stancliff and Jan-Erik Rediger for the work done in the context of this release. - additional changes from 2.8.7 # UPGRADE URGENCY: LOW for Redis, LOW for Sentinel. However this release adds new features so users may want to upgrade in order to exploit the new functionalities. * [FIX] Sometimes the absolute config file path was obtained in a wrong way. This happened when there was a "dir" directive inside the config file and at the same time the configuration file was given as a relative path to redis-server or redis-sentinel executables. * [FIX] redis-cli: Automatically enter --slave mode when SYNC or PSYNC are called during an interactive session. * [FIX] Sentinel "IDONTKNOW" error removed as it does not made sense with the new Sentinel design. This error was actually a fix for a design error in the first implementation of Sentinel. * [FIX] Sentinel: added a missing exit() call to abort after config file checks at startup. This error was introduced with an improvement in a previous 2.8 release. * [FIX] BITCOUNT: fixed unaligned access causing issues in sparc and other archs not capable of dealing with unaligned accesses. This also makes the code faster in archs where unaligned accesses are allowed. * [FIX] Sentinel: better nodes fail over start time desynchronization to avoid split-brain during the voting process needed to get authorization to fail over. This means the system is less likely to need to retry and will fail over faster. No changes in behavior / correctness. * [FIX] Force INFO used_memory_peak to match peak memory. This generated some confusion among users even if it was not an actual bug. * [NEW] Sentinel unit tests and framework. More tests needed and units must be improved in order to have less false positives, but it is a start and features a debugging console that is useful to fix tests or to inspect bugs causing tests failures. * [NEW] New Sentinel events: +/-monitor and +set used to monitor when an instance to monitor is added or removed, or when a configuration is modified via SENTINEL SET. * [NEW] Redis-cli updated to use SCAN instead of random sampling via RANDOMKEY in order to implement --bigkeys feature. Moreover the implementation now supports pipelining and reports more information at the end of the scan. Much faster, much better. A special thank you to Michael Grunder for this improvement. * [NEW] redis-cli now supports a new --intrinsic-latency mode that is able to meter the latency of a system due to kernel / hypervisor. How to use it is explained at http://redis.io/topics/latency. * [NEW] New command BITPOS: find first bit set or clear in a bitmap. * [NEW] CONFIG REWRITE calls are now logged. ------------------------------------------------------------------- Tue Mar 4 13:51:48 UTC 2014 - mrueckert@suse.de - update to 2.8.6 Redis 2.6 is mostly a strict subset of 2.8. However there are a few things that you should be aware of: The following commands changed behavior: * SORT with ALPHA now sorts according to local collation locale if no STORE option is used. * ZADD/ZINCRBY are now able to accept a bigger range of values as valid scores, that is, all the values you may end having as a result of calling ZINCRBY multiple times. * Many errors are now prefixed by a more specific error code instead of the generic -ERR, for example -WRONGTYPE, -NOAUTH, ... * PUBLISH called inside Lua scripts is now correctly propagated to slaves. The following redis.conf and CONFIG GET / SET parameters changed: * logfile now uses the empty string in order to log to standard output, so 'logfile stdout' is now invalid, use 'logfile ""' instead. The following INFO fields changed format in a non-backward compatible way: * The list of slaves in INFO is now in field=value format. Replication: Redis 2.8 can be used as slave for Redis 2.6, but doing this is only a good idea for the short amount of time needed to upgrade your servers. We suggest to update both master and slaves at about the same time. For all the details see /usr/share/doc/packages/redis/00-RELEASENOTES - updated redis-conf.patch to apply cleanly again ------------------------------------------------------------------- Thu Aug 8 12:50:55 UTC 2013 - mrueckert@suse.de - drop skip-aof-test.patch ------------------------------------------------------------------- Thu Aug 8 02:07:54 UTC 2013 - mrueckert@suse.de - disable skip-aof-test.patch for now: it seems adding procps to the buildrequires also fixed that test. ------------------------------------------------------------------- Wed Aug 7 14:37:30 UTC 2013 - mrueckert@suse.de - build require procps to get "ps" which is needed for the cleanup of the redis processes launched by the testsuite. ------------------------------------------------------------------- Wed Aug 7 14:31:17 UTC 2013 - mrueckert@suse.de - update to 2.6.14 UPGRADE URGENCY: HIGH because of the following two issues: * Lua scripting + Replication + AOF in slaves problem (see Issue #1164). * AOF + expires possible race condition (see Issue #1079). * [FIX] AOF bug: expire could be removed from key on AOF rewrite. * [FIX] Allow writes from scripts called by AOF loading in read-only slaves. * [FIX] Sentinel: parse new verison of INFO replication output correctly. * [NEW] Reset masterauth if an empty string is configured. For the changes from 2.6.10-2.6.13 see /usr/share/doc/packages/redis/00-RELEASENOTES - refreshed patches: - redis-conf.patch: - redis-enable-bactrace-on-x86-and-ia64-only.patch: just to get rid of fuzz - skip-aof-test.patch: can not comment in the array like that. rather remove the line. ------------------------------------------------------------------- Thu Jul 4 16:10:47 UTC 2013 - dvaleev@suse.com - enable backtrace for x86 and ia64 only redis-enable-bactrace-on-x86-and-ia64-only.patch ------------------------------------------------------------------- Mon Jun 24 14:15:49 UTC 2013 - vjt@openssl.it - Make the logrotate script setuid/setgid to the redis user/group ------------------------------------------------------------------- Tue Jan 22 10:47:17 UTC 2013 - mrueckert@suse.de - update to 2.6.9 (bnc#798455) Too many changes to list them here, please refer to /usr/share/doc/packages/redis/00-RELEASENOTES - refreshed patches: redis-conf.patch skip-aof-test.patch - dropped patches: redis-endian.patch redis-2.4.15-linenoise-cflags.patch ------------------------------------------------------------------- Tue Nov 20 07:40:52 UTC 2012 - dimstar@opensuse.org - Fix useradd invocation: -o is useless without -u and newer versions of pwdutils/shadowutils fail on this now. ------------------------------------------------------------------- Thu Nov 8 16:12:21 UTC 2012 - vjt@openssl.it - Implement a multi-instance setup * Allow for multiple configuration files of named instances under /etc/redis * Each instance has its own data directory under /var/lib/redis/$INSTANCE * Each instance has its own PID file under /var/run/redis/$INSTANCE.pid * Each instance has its own log files under /var/log/redis/$INSTANCE.log * Instances may be started or stopped individually passing a second argument to the init script * Do not create an active default.conf, rather use an .example suffix ------------------------------------------------------------------- Mon Jul 23 18:11:50 UTC 2012 - mrueckert@suse.de - update to 2.4.15 too many changes see /usr/share/doc/packages/redis/00-RELEASENOTES - added redis-2.4.15-linenoise-cflags.patch make sure we build the dependency with cflags - refreshed redis-endian.patch ------------------------------------------------------------------- Fri Mar 23 13:35:46 UTC 2012 - dvaleev@suse.com - fix ppc and ppc64 build. disable tests for powerpc for now ------------------------------------------------------------------- Thu Nov 24 09:56:41 UTC 2011 - saschpe@suse.de - Correct the 'how to get it running' comment in %post ------------------------------------------------------------------- Thu Nov 24 09:48:13 UTC 2011 - saschpe@suse.de - Don't use runlevel 4 in init script - Compile with RPM_OPT_FLAGS (PROG env var didn't cut it) - Remove outdated %clean section, bogus doc package (there are none) and netcat runtime dependency (for init script?) - Set license to SDPX style ------------------------------------------------------------------- Mon Oct 24 10:48:19 UTC 2011 - asn@cryptomilk.org - Updated to 2.4.1. - Fixed init script. ------------------------------------------------------------------- Tue May 24 09:39:19 UTC 2011 - prusnak@opensuse.org - updated to 2.2.7 * Fixed bug #543-2 (the issue was reopened with a completely different report) that caused Redis to randomly crash on list push performed against lists with other clients blocked with BLPOP (or variants). (changes from 2.2.6) * Fixed bug #543. If you saw Redis instances crashing on List operations (only happening with a non-default max entry size ziplist setting in redis.conf) it was almost certainly this problem. * Fixed a bug with replication where SLAVEOF NO ONE caused a slave to close the connection with all its slaves. (changes from 2.2.5) * Fixed a crash occurring when loading an AOF containing the SPOP command. ------------------------------------------------------------------- Fri Apr 15 18:18:56 UTC 2011 - mrueckert@suse.de - update to 2.2.4 * Return value of OBJECT DEBUG against sorted sets fixed, now is "skiplist". - additional changes from 2.2.3 * Fixed issue #503. MONITOR + QUIT (and other combinations) could crash the server. * OBJECT command implemented. See http://redis.io/commands/object * Fixed a problem in redis-cli related to escapes in the form "\x..". * Fixed a minor memory leak in redis-cli * Saved RDB on SIGTERM on archs where it was not working properly. - additional changes from 2.2.2 * AOF file descriptor leak after the first rewrite fixed. * Return value of GETRANGE / SUBSTR is now an empty string if the interval specified is not valid, or the key does not exist. Was a null bulk reply before, but this is against the Redis way. - fix the path to the log file in the conf patch to match the rest of the package - created log dir - changed home dir of the redis user from /var/run/redis to /var/lib/redis. the old home dir wasnt created anyway. ------------------------------------------------------------------- Wed Feb 23 18:10:17 UTC 2011 - jw@novell.com - updated to 2.2.1 ------------------------------------------------------------------- Mon Feb 21 01:02:57 UTC 2011 - jw@novell.com - collecting stuff from Virtualization:Cloud:OpenStack, home:jfding:nosql, home:qik ------------------------------------------------------------------- Thu Jan 27 16:18:42 UTC 2011 - seife+obs@b1-systems.com - package log directory to fix server start ------------------------------------------------------------------- Tue Jan 18 21:08:35 UTC 2011 - asn@cryptomilk.org - Added logging to /var/log/redis/redis.log. - Added log rotation. ------------------------------------------------------------------- Thu Jan 13 10:34:35 UTC 2011 - jfding@gmail.com - Upgrade to latest stable 2.0.4 ------------------------------------------------------------------- Mon Jan 10 16:29:31 CET 2011 - asn@cryptomilk.org - Fixed creation of the pid file. ------------------------------------------------------------------- Sun Jan 9 23:28:39 CET 2011 - asn@cynapses.org - bind only to localhost - reduce the logging level for production - silence the init script a bit ------------------------------------------------------------------- Mon May 17 14:26:18 UTC 2010 - mrueckert@suse.de - dont run as root ------------------------------------------------------------------- Mon May 17 14:10:31 UTC 2010 - mrueckert@suse.de - update to version 1.2.6 fixes two critical replication bugs, and a few improvements. - Fixed Issue 207 (http://code.google.com/p/redis/issues/detail?id=207) (broken replication with binary arguments not in the last position with the MSET command or any other command issued with new multi-bulk protocol) - Fixed Issue 174 (http://code.google.com/p/redis/issues/detail?id=174) (temp names collisions producing broken slave-side .rdb files) - Redis-cli backported from Redis master, with interactive mode, line editing via the linenoise library, auth ability, and much more. - ZRANGEBYSCORE now supports WITHSCORES as well (backported from master) - A simplified version of redis-stat (from redis tools) added. - update to version 1.2.5 fixes a replication bug: multiple slaves connecting to the same master could lead to random crashes or corruptions. - use PROF parameter to pass in optflags ------------------------------------------------------------------- Sun Mar 7 17:21:53 UTC 2010 - prusnak@suse.cz - updated to 1.2.4 - install config file, more fixes to initscript ------------------------------------------------------------------- Fri Mar 5 06:12:24 EST 2010 - pzb@suse.de - Add BuildRoot to spec file to enable builds on old distros - Patch initscript to use netcat instead of nc i (same command, different package) - Update to Redis 1.2.3 - The example init script was broken for a typo. Fixed. - Support for large files in 32 bit targets, very important when saving very large databases or when using the Append Only File (when Redis was compiled for 64 bit target there was no problem). - Now 'make 32bit' uses -m32 instead of Apple-specific -arch - Stack trace fixed for some Linux targets ------------------------------------------------------------------- Thu Jan 21 16:32:45 UTC 2010 - prusnak@suse.cz - created package