rpcbind/rpcbind.spec
2014-11-15 07:13:39 +00:00

178 lines
5.9 KiB
RPMSpec

#
# spec file for package rpcbind
#
# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
Name: rpcbind
Version: 0.2.1_rc4
Release: 0
Summary: Transport independent RPC portmapper
License: BSD-4-Clause
Group: Productivity/Networking/System
Url: git://git.infradead.org/users/steved/rpcbind.git
Source: %{name}-%{version}.tar.bz2
Source2: sysconfig.rpcbind
Source3: rpcbind.xml
Source4: pmap_set.c
BuildRoot: %{_tmppath}/%{name}-%{version}-build
BuildRequires: libtirpc-devel
BuildRequires: libtool
BuildRequires: pkgconfig
BuildRequires: tcpd-devel
BuildRequires: pkgconfig(libsystemd-daemon)
PreReq: %fillup_prereq
Requires(pre): /usr/sbin/useradd
# The next three are from upstream, applied directly on top of rc4.
Patch0: 0001-Fix-building-one-systems-w-out-nss.h.patch
Patch1: 0002-Rename-configure.in-to-configure.ac.patch
Patch2: 0003-rpcbind-rpcuser-not-being-set-in-Makefile.am.patch
Patch3: 0004-Silence-a-warning-about-setgroups-being-implicitly-d.patch
Patch4: 0005-Remove-obsolete-function-in6_fillscopeid.patch
Patch5: 0006-In-init_transport-move-creation-of-COTS-sockets-clos.patch
Patch6: 0007-The-use-of-AI_NUMERICHOST-in-init_transport-is-broke.patch
Patch7: 0008-First-part-of-init_transport-refactoring.patch
Patch8: 0009-init_transport-move-the-registration-code-into-a-sep.patch
Patch9: 0010-Fix-the-behavior-when-specifying-the-h-option.patch
Patch10: 0011-Clean-up-the-way-we-handle-the-h-option-in-init_tran.patch
Patch11: 0012-Support-systemd-activation.patch
Patch12: 0013-socket-activation-Fix-rpcbind.service-to-use-separat.patch
Patch13: 0014-When-using-systemd-redirect-syslog-calls-to-the-syst.patch
Patch14: 0015-When-using-systemd-activation-make-rpcbind-notify-sy.patch
Patch15: 0016-Notify-systemd-unconditionally.patch
Patch16: 0017-Pull-the-sysconfig-file-into-rpcbind.service-and-use.patch
Patch17: 0018-configure-check-for-nss.h.patch
Patch18: 0019-rpcinfo-ip_ping-clean-up-client-ping-create-destroy.patch
Patch19: 0020-rpcinfo-introduce-new-helper-function-ip_getclient.patch
Patch20: 0021-rpcinfo-make-t-u-options-support-IPv6-addresses-too.patch
Patch21: 0022-rpcinfo-remove-obsolete-function-clnt_com_create.patch
Patch22: 0023-Make-rpcinfo-p-support-IPv6-addresses-too.patch
Patch23: 0024-rpcinfo-remove-obsolete-function-get_inet_address.patch
Patch24: 0025-rpcinfo-warmstat_no-warning-about-missing-file.patch
Patch25: 0026-systemd-no-default-dep
Patch26: 0027-socket-before-service.patch
Patch27: 0028-rpcbind-after-var-run.patch
Patch28: 0029-rpcbind-sd-notify-stupid-errmsg.patch
%define statefile /var/lib/portmap.state
%{?systemd_requires}
Provides: portmap
%description
Rpcbind is a replacement for portmap. Whereas portmap supports only UDP
and TCP transports over INET (IPv4), rpcbind can be configured to work
on various transports supported by the TI-RPC. This includes TCP and
UDP over IPv6. Moreover, rpcbind provides additional functions in
regards to portmap.
%prep
%setup -q
cp %{SOURCE4} .
%patch0 -p1
%patch1 -p1
%patch2 -p1
%patch3 -p1
%patch4 -p1
%patch5 -p1
%patch6 -p1
%patch7 -p1
%patch8 -p1
%patch9 -p1
%patch10 -p1
%patch11 -p1
%patch12 -p1
%patch13 -p1
%patch14 -p1
%patch15 -p1
%patch16 -p1
%patch17 -p1
%patch18 -p1
%patch19 -p1
%patch20 -p1
%patch21 -p1
%patch22 -p1
%patch23 -p1
%patch24 -p0
%patch25 -p1
%patch26 -p1
%patch27 -p1
%patch28 -p1
%build
autoreconf -fiv
export CFLAGS="$RPM_OPT_FLAGS -fpie"
export LDFLAGS="-pie -Wl,-z,relro,-z,now"
%configure \
--bindir=/sbin \
--enable-libwrap \
--enable-warmstarts \
--disable-debug \
--with-statedir=%{_localstatedir}/lib/rpcbind \
--with-rpcuser=rpc
%{__make} %{?jobs:-j%jobs}
%{__cc} -pie -fpie -fwhole-program -Wl,-z,relro,-z,now %{optflags} pmap_set.c -o pmap_set
%install
make install DESTDIR=$RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT%_localstatedir/lib/rpcbind
# fillup template
mkdir -p $RPM_BUILD_ROOT/var/adm/fillup-templates
install -m 644 %{SOURCE2} $RPM_BUILD_ROOT/var/adm/fillup-templates/
mkdir -p $RPM_BUILD_ROOT%_datadir/omc/svcinfo.d
install -m 644 %{SOURCE3} $RPM_BUILD_ROOT%_datadir/omc/svcinfo.d/
#
install -m 755 pmap_set $RPM_BUILD_ROOT/sbin/pmap_set2
# create symlink for rcrpcbind
mkdir -p $RPM_BUILD_ROOT%{_sbindir}
ln -s /sbin/service $RPM_BUILD_ROOT%{_sbindir}/rcrpcbind
%clean
rm -rf $RPM_BUILD_ROOT
%pre
%service_add_pre %{name}.service %{name}.socket
# Add "rpc" user
getent passwd rpc >/dev/null || /usr/sbin/useradd -r -g nogroup -d /var/lib/empty -s /sbin/nologin -c "user for rpcbind" rpc
exit 0
%preun
%service_del_preun %{name}.service %{name}.socket
%post
%{fillup_only -n rpcbind}
%service_add_post %{name}.service %{name}.socket
%postun
%service_del_postun %{name}.service %{name}.socket
%files
%defattr(-,root,root)
%doc AUTHORS ChangeLog COPYING NEWS README
/sbin/pmap_set2
/sbin/rpcbind
/sbin/rpcinfo
%{_sbindir}/rcrpcbind
%{_mandir}/*/*
%attr(-,rpc,root) %{_localstatedir}/lib/rpcbind
/var/adm/fillup-templates/sysconfig.rpcbind
%{_datadir}/omc/svcinfo.d/rpcbind.xml
%{_unitdir}/%{name}.service
%{_unitdir}/%{name}.socket
%changelog