Accepting request 563489 from home:markkp:branches:Base:System

- Converted the following SysV init scripts to systemd unit files
  and scripts (bsc#1050786):
  * appldata
  * hsnc
  * vmlogrdr
  * xpram

OBS-URL: https://build.opensuse.org/request/show/563489
OBS-URL: https://build.opensuse.org/package/show/Base:System/s390-tools?expand=0&rev=43

xpram

@@ -3,24 +3,7 @@
 #
 # Submit feedback to http://www.suse.de/feedback/
 #
-# /etc/init.d/xpram
-#
-#   and symbolic its link
-#
-# /use/sbin/rcxpram
-#
 # System startup script for XPRAM device driver
-#
-### BEGIN INIT INFO
-# Provides: xpram
-# Required-Start: $remote_fs
-# Required-Stop:  $null
-# Default-Start:  3 5
-# Default-Stop:   0 1 6
-# Short-Description:    XPRAM device driver
-# Description:    Creates an xpram device and mounts it
-### END INIT INFO
-#
 
 XPRAM_CONFIG_FILE=/etc/sysconfig/xpram
 
@@ -36,8 +19,6 @@ read_config_file() {
     else
 	echo -ne "Cannot read $file: empty or nonexistant! "
 	# Means not configured:
-	rc_failed 6
-	rc_status -v
 	return 6
     fi
 }
@@ -45,9 +26,7 @@ read_config_file() {
 prepare_xpram() {
     if [ -z "$XPRAM_MNTPATH" -o -z "$XPRAM_DEVNODE" ]; then
         echo -n "Cannot mkfs/mount XPRAM: Missing parameters! "
-        rc_failed 6
-        rc_status -v
-        rc_exit
+         exit 6
     fi
     grep -q $XPRAM_DEVNODE /proc/mounts 2>&1 > /dev/null
     if [ $? -eq 0 ] ; then
@@ -71,9 +50,7 @@ prepare_xpram() {
     then
         echo
         echo -n "Warning: current filessystem and configured filesystem are not the same!"
-        rc_failed 6
-        rc_status -v
-        rc_exit
+        exit 6
     fi
     if [ "$XPRAM_FSTYPE" = swap ]
     then
@@ -92,28 +69,11 @@ prepare_xpram() {
         if [ $? -ne 0 ]
         then
             echo -n "Mount failed with error code $?"
-            rc_failed 6
-            rc_status -v
-            rc_exit
+            exit 6 
         fi
     fi
 }
 
-# Shell functions sourced from /etc/rc.status:
-#      rc_check         check and set local and overall rc status
-#      rc_status        check and set local and overall rc status
-#      rc_status -v     ditto but be verbose in local rc status
-#      rc_status -v -r  ditto and clear the local rc status
-#      rc_failed        set local and overall rc status to failed
-#      rc_failed <num>  set local and overall rc status to <num><num>
-#      rc_reset         clear local rc status (overall remains)
-#      rc_exit          exit appropriate to overall rc status
-. /etc/rc.status
-
-# First reset status of this service
-config_read=0
-rc_reset
-
 # Return values acc. to LSB for all commands but status:
 # 0 - success
 # 1 - generic or unspecified error
@@ -132,9 +92,7 @@ rc_reset
 check_config () {
     if [ -z "$XPRAM_MODULE" ]; then
 	echo -n "$file: parameters XPRAM_MODULE missing! "
-	rc_failed 6
-	rc_status -v
-	rc_exit
+	exit 6
     fi
 }
 
@@ -142,20 +100,8 @@ quit_disabled() {
     if [ "$XPRAM_START" != "yes" ]; then
 	# Config file exists but xpram not enabled, do not complain,
 	# but note with exit status 6 that we are not configured.
-	rc_exit
-    fi
-}
-
-check_enabled() {
-    if [ "$XPRAM_START" != "yes" ]; then
-	rc_failed 6
-	if [ "$XPRAM_MODULE" ]; then
-	    if grep -q "$XPRAM_MODULE" /proc/modules; then
-		echo -n "Service $service $_rc_todo "
-		rc_status -v
-	    fi
-	fi
-	rc_exit
+	echo "xpram not enabled"
+	exit 0
     fi
 }
 
@@ -163,9 +109,8 @@ service="xpram"
 case "$1" in
     start)
         # Read in configuration
-        read_config_file || rc_exit
+        read_config_file || exit 6
 
-	check_enabled
 	quit_disabled
 	check_config
 
@@ -173,17 +118,15 @@ case "$1" in
 	modprobe "$XPRAM_MODULE"
 	if [ $? -ne 0 ]; then
 	    echo -n "- failed to load $XPRAM_MODULE "
-	    rc_failed 1
+	    exit 1
 	else
 	    prepare_xpram
 	fi
 
-	# Remember status and be verbose
-	rc_status -v
 	;;
     stop)
         # Read in configuration
-        read_config_file || rc_exit
+        read_config_file || exit 6
 
 	# check_enabled
 	# quit_disabled
@@ -203,44 +146,10 @@ case "$1" in
 
 	if grep -q "$XPRAM_MODULE" /proc/modules; then
 		rmmod "$XPRAM_MODULE"
-		rc_status
 	else
-		rc_failed 7
+		exit 7
 	fi
 
-	# Remember status and be verbose
-	rc_status -v
-	;;
-    try-restart)
-	## Stop the service and if this succeeds (i.e. the 
-	## service was running before), start it again.
-	## Note: try-restart is not (yet) part of LSB (as of 0.7.5)
-	$0 status >/dev/null &&  $0 restart
-
-	# Remember status and be quiet
-	rc_status
-	;;
-    restart)
-	## Stop the service and regardless of whether it was
-	## running or not, start it again.
-	$0 stop
-	$0 start
-
-	# Remember status and be quiet
-	rc_status
-	;;
-    force-reload)
-	echo -n "Force-reload $service "
-
-	$0 stop  &&  $0 start
-	rc_status
-	;;
-    reload)
-	echo -n "Reloading $service not supported."
-	
-	## it does not support reload:
-	rc_failed 3
-	rc_status -v
 	;;
     status)
 	echo -n "Checking $service "
@@ -251,7 +160,7 @@ case "$1" in
 	# 3 - service not running
 
         # Read in configuration
-        read_config_file || rc_exit
+        read_config_file || exit 3
 
 	check_config
 
@@ -261,18 +170,12 @@ case "$1" in
 		if ! grep -q $XPRAM_DEVNODE /proc/mounts && ! swapon -s | grep -q $XPRAM_DEVNODE; then
 		    xpram_result=3
 		    echo -n "loaded, but $XPRAM_DEVNODE not used"
-		    rc_failed 3
+		    exit 3
 		fi
 	    fi
 	else
-	    rc_failed 3
+	    exit 3
 	fi
 
-	rc_status -v
-	;;
-    *)
-	echo "Usage: $0 {start|stop|status|try-restart|restart}"
-	exit 1
 	;;
 esac
-rc_exit