---
 etc/sysconfig/dumpconf |  133 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 133 insertions(+)

--- a/etc/sysconfig/dumpconf
+++ b/etc/sysconfig/dumpconf
@@ -1,3 +1,4 @@
+###########################################################################################
 #
 # s390 dump config
 #
@@ -78,3 +79,135 @@
 # dumpconf becomes active immediately during system startup.
 #
 # ON_PANIC=reipl
+
+############################ Begin Definitions ###########################################
+## Path:		System/Dumpconf
+## Description:		Configures the actions which should be performed after a kernel panic
+## Type:		list(stop,dump,vmcmd,reipl,dump_reipl)
+## Default:		"stop"
+## ServiceRestart:	dumpconf
+#
+# Define the action that should be taken if a kernel panic happens.
+#
+ON_PANIC="stop"
+
+## Type:		integer(0:300)
+## Default:		5
+## ServiceRestart:	dumpconf
+#
+# Using reipl or dump_reipl actions with ON_PANIC can lead to the system
+# looping with alternating IPLs and crashes. Use DELAY_MINUTES to prevent
+# such a loop. DELAY_MINUTES delays activating the specified panic action
+# for a newly started system. When the specified time has elapsed, dumpconf
+# activates the specified panic action. This action is taken should the
+# system subsequently crash. If the system crashes before the time has
+# elapsed the previously defined action is taken. If no previous action has
+# been defined the default action (STOP) is performed.
+#
+DELAY_MINUTES="5"
+
+## Type:		list(ccw,fcp,nvme)
+## Default:		""
+## ServiceRestart:	dumpconf
+#
+# Define the type, ccw for DASD, fcp for zFCP, or nvme for NVMe Disk.
+#
+DUMP_TYPE=""
+
+## Type:		string
+## Default:		""
+## ServiceRestart:	dumpconf
+#
+# Define the device id for a DASD or SCSI over zFCP dump device.
+#
+# For example (DASD and SCSI over zFCP have the same structure): DEVICE=0.0.4711
+#
+DEVICE=""
+
+# Type:		string
+## Default:		""
+## ServiceRestart:	dumpconf
+#
+# Define the WWPN for a zFCP dump device.
+#
+# For example: WWPN=0x5005076303004711
+#
+WWPN=""
+
+## Type:		string
+## Default:		""
+## ServiceRestart:	dumpconf
+#
+# Define the LUN for a zFCP dump device.
+#
+# For example: LUN=0x4711000000000000
+#
+LUN=""
+
+## Type:		integer(0:30)
+## Default:		"0"
+## ServiceRestart:	dumpconf
+#
+# Define the Boot program selector for a zFCP dump device.
+#
+# A decimal value between 0 and 30 specifying the program to be loaded from
+# the FCP-I/O device.
+#
+BOOTPROG="0"
+
+## Type:		string
+## Default:		"0"
+## ServiceRestart:	dumpconf
+#
+# Define the Boot record logical block address for a zFCP dump device.
+#
+# The hexadecimal digits designating the logical-block address of the boot record of the FCP-I/O device.
+# It must be a value from 0-FFFFFFFF FFFFFFFF. For values longer than 8 hex characters at least one separator
+# blank is required after the 8th character.
+#
+BR_LBA="0"
+
+## Type:		string
+## Default:		""
+## ServiceRestart:	dumpconf
+#
+# Define the Function ID for NVMe dump device.
+#
+# The hexadecimal digits designating the Function ID for the NMVe disk.
+#
+# For example: FID=0x00000300
+#
+FID=""
+
+## Type:		string
+## Default:		""
+## ServiceRestart:	dumpconf
+#
+# Define the Namespace ID for the NVMe dump device
+#
+# The hexadecimal digits designating the Namespace ID for the NMVe disk.
+#
+# For example: NSID=0x00000001
+#
+NSID=""
+
+## Type:		string
+## Default:		""
+## ServiceRestart:	dumpconf
+#
+# VMCMD_<X>
+# Specifies a CP command, <X> is a number from one to eight. You can
+# specify up to eight CP commands that are executed in case of a kernel
+# panic. Note that VM commands, device adresses, and VM guest names
+# must be uppercase.
+#
+VMCMD_1=""
+VMCMD_2=""
+VMCMD_3=""
+VMCMD_4=""
+VMCMD_5=""
+VMCMD_6=""
+VMCMD_7=""
+VMCMD_8=""
+
+############################### End Definitions ##############################################
\ No newline at end of file