pool/s390-tools
SHA256
17
0
Fork 1
Code Issues Pull Requests Activity
Files
factory
s390-tools/s390-tools-combined.patch
Nikolay Gueorguiev acc6bc0429 - Updated a logic error in: 
* s390-tools-combined.patch
- Update the code for IBM z17 machine type 9176:
  * read_values.c
  * cputype
  * Renamed cputype.1 to cputype.8 and amended
  * Amended read_values.8
- "Improved" the read_values.c: 
  * Added functionalities for '-a' and '-L attributes'
- Re-vendor-ed vendor.tar.zst

OBS-URL: https://build.opensuse.org/package/show/Base:System/s390-tools?expand=0&rev=282
2026-02-12 14:03:50 +00:00

346 lines
11 KiB
Diff
Raw Permalink Blame History

diff -Naur a/etc/sysconfig/dumpconf b/etc/sysconfig/dumpconf
--- a/etc/sysconfig/dumpconf 2025-12-11 17:03:28.000000000 +0100
+++ b/etc/sysconfig/dumpconf 2026-02-06 14:03:46.482188674 +0100
@@ -1,3 +1,4 @@
+###########################################################################################
#
# s390 dump config
#
@@ -78,3 +79,135 @@
# dumpconf becomes active immediately during system startup.
#
# ON_PANIC=reipl
+
+############################ Begin Definitions ###########################################
+## Path: System/Dumpconf
+## Description: Configures the actions which should be performed after a kernel panic
+## Type: list(stop,dump,vmcmd,reipl,dump_reipl)
+## Default: "stop"
+## ServiceRestart: dumpconf
+#
+# Define the action that should be taken if a kernel panic happens.
+#
+ON_PANIC="stop"
+
+## Type: integer(0:300)
+## Default: 5
+## ServiceRestart: dumpconf
+#
+# Using reipl or dump_reipl actions with ON_PANIC can lead to the system
+# looping with alternating IPLs and crashes. Use DELAY_MINUTES to prevent
+# such a loop. DELAY_MINUTES delays activating the specified panic action
+# for a newly started system. When the specified time has elapsed, dumpconf
+# activates the specified panic action. This action is taken should the
+# system subsequently crash. If the system crashes before the time has
+# elapsed the previously defined action is taken. If no previous action has
+# been defined the default action (STOP) is performed.
+#
+DELAY_MINUTES="5"
+
+## Type: list(ccw,fcp,nvme)
+## Default: ""
+## ServiceRestart: dumpconf
+#
+# Define the type, ccw for DASD, fcp for zFCP, or nvme for NVMe Disk.
+#
+DUMP_TYPE=""
+
+## Type: string
+## Default: ""
+## ServiceRestart: dumpconf
+#
+# Define the device id for a DASD or SCSI over zFCP dump device.
+#
+# For example (DASD and SCSI over zFCP have the same structure): DEVICE=0.0.4711
+#
+DEVICE=""
+
+# Type: string
+## Default: ""
+## ServiceRestart: dumpconf
+#
+# Define the WWPN for a zFCP dump device.
+#
+# For example: WWPN=0x5005076303004711
+#
+WWPN=""
+
+## Type: string
+## Default: ""
+## ServiceRestart: dumpconf
+#
+# Define the LUN for a zFCP dump device.
+#
+# For example: LUN=0x4711000000000000
+#
+LUN=""
+
+## Type: integer(0:30)
+## Default: "0"
+## ServiceRestart: dumpconf
+#
+# Define the Boot program selector for a zFCP dump device.
+#
+# A decimal value between 0 and 30 specifying the program to be loaded from
+# the FCP-I/O device.
+#
+BOOTPROG="0"
+
+## Type: string
+## Default: "0"
+## ServiceRestart: dumpconf
+#
+# Define the Boot record logical block address for a zFCP dump device.
+#
+# The hexadecimal digits designating the logical-block address of the boot record of the FCP-I/O device.
+# It must be a value from 0-FFFFFFFF FFFFFFFF. For values longer than 8 hex characters at least one separator
+# blank is required after the 8th character.
+#
+BR_LBA="0"
+
+## Type: string
+## Default: ""
+## ServiceRestart: dumpconf
+#
+# Define the Function ID for NVMe dump device.
+#
+# The hexadecimal digits designating the Function ID for the NMVe disk.
+#
+# For example: FID=0x00000300
+#
+FID=""
+
+## Type: string
+## Default: ""
+## ServiceRestart: dumpconf
+#
+# Define the Namespace ID for the NVMe dump device
+#
+# The hexadecimal digits designating the Namespace ID for the NMVe disk.
+#
+# For example: NSID=0x00000001
+#
+NSID=""
+
+## Type: string
+## Default: ""
+## ServiceRestart: dumpconf
+#
+# VMCMD_<X>
+# Specifies a CP command, <X> is a number from one to eight. You can
+# specify up to eight CP commands that are executed in case of a kernel
+# panic. Note that VM commands, device adresses, and VM guest names
+# must be uppercase.
+#
+VMCMD_1=""
+VMCMD_2=""
+VMCMD_3=""
+VMCMD_4=""
+VMCMD_5=""
+VMCMD_6=""
+VMCMD_7=""
+VMCMD_8=""
+
+############################### End Definitions ##############################################
diff -Naur a/etc/udev/rules.d/59-dasd.rules b/etc/udev/rules.d/59-dasd.rules
--- a/etc/udev/rules.d/59-dasd.rules 2025-12-11 17:03:28.000000000 +0100
+++ b/etc/udev/rules.d/59-dasd.rules 2026-02-06 15:49:49.132244953 +0100
@@ -6,16 +6,17 @@
SUBSYSTEM!="block", GOTO="dasd_symlinks_end"
KERNEL!="dasd*", GOTO="dasd_symlinks_end"
-ACTION!="change", GOTO="dasd_block_end"
+ACTION!="change|add", GOTO="dasd_block_end"
# by-id (hardware serial number)
KERNEL=="dasd*[!0-9]", ATTRS{status}=="online", IMPORT{program}="/sbin/dasdinfo -a -e -b $kernel"
+KERNEL=="dasd*[!0-9]", ATTRS{status}=="online", IMPORT{program}="/usr/sbin/dasdinfo -a -e -b $kernel"
KERNEL=="dasd*[!0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
KERNEL=="dasd*[!0-9]", ENV{ID_UID}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_UID}"
KERNEL=="dasd*[!0-9]", ENV{ID_XUID}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_XUID}"
LABEL="dasd_block_end"
-ACTION!="change|add", GOTO="dasd_symlinks_end"
+ACTION!="change|add", GOTO="dasd_partition_end"
# for partitions import parent information
KERNEL=="dasd*[0-9]", IMPORT{parent}=="ID_*"
@@ -24,6 +25,14 @@
KERNEL=="dasd*[0-9]", ENV{ID_UID}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_UID}-part%n"
KERNEL=="dasd*[0-9]", ENV{ID_XUID}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_XUID}-part%n"
+LABEL="dasd_partition_end"
+
+ENV{ID_SERIAL}!="?*", GOTO="dasd_symlinks_end"
+# by-label/by-uuid (filesystem properties)
+IMPORT{builtin}="blkid"
+ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID}"
+ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_SAFE}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_SAFE}"
+
LABEL="dasd_symlinks_end"
# on device add set request queue scheduler to none
diff -Naur a/fdasd/fdasd.c b/fdasd/fdasd.c
--- a/fdasd/fdasd.c 2025-12-11 17:03:28.000000000 +0100
+++ b/fdasd/fdasd.c 2026-02-06 14:10:08.461803766 +0100
@@ -1232,10 +1232,13 @@
*/
static void fdasd_reread_partition_table(fdasd_anchor_t *anc)
{
+ int rc = 0 ;
+
if (!anc->silent)
printf("rereading partition table...\n");
- if (dasd_reread_partition_table(options.device, 5) != 0) {
+ rc = dasd_reread_partition_table(options.device, 1);
+ if (rc == EINVAL && !anc->force_virtual) {
fdasd_error(anc, unable_to_ioctl, "Error while rereading "
"partition table.\nPlease reboot!");
}
diff -Naur a/zdev/dracut/95zdev/parse-dasd.sh b/zdev/dracut/95zdev/parse-dasd.sh
--- a/zdev/dracut/95zdev/parse-dasd.sh 2025-12-11 17:03:28.000000000 +0100
+++ b/zdev/dracut/95zdev/parse-dasd.sh 2026-02-06 14:13:41.947730795 +0100
@@ -10,6 +10,8 @@
# parameters are evaluated and used to configure dasd devices.
#
+zdev_dasd_base_args="--no-settle --yes --no-root-update --force"
+
# shellcheck source=/dev/null
type zdev_parse_dasd_list > /dev/null 2>&1 || . /lib/s390-tools/zdev-from-dasd_mod.dasd
@@ -27,9 +29,21 @@
zdev_parse_rd_dasd() {
local _zdev_dasd _zdev_dasd_list
- for _zdev_dasd in $(getargs rd.dasd -d 'rd_DASD='); do
- _zdev_dasd_list="${_zdev_dasd_list:+${_zdev_dasd_list},}$_zdev_dasd"
- done
+ # autodetect active bootdev from zipl device
+ if ! getargbool 0 'rd.dasd' \
+ && [[ -f /sys/firmware/ipl/ipl_type ]] \
+ && [[ $(< /sys/firmware/ipl/ipl_type) == "ccw" ]]; then
+ read -r _ccw < /sys/firmware/ipl/device
+
+ if lszdev --offline "$_ccw" &>/dev/null; then
+ chzdev --offline --existing --enable --active $zdev_dasd_base_args \
+ dasd "$_ccw"
+ fi
+ else
+ for _zdev_dasd in $(getargs rd.dasd -d 'rd_DASD='); do
+ _zdev_dasd_list="${_zdev_dasd_list:+${_zdev_dasd_list},}$_zdev_dasd"
+ done
+ fi
echo "$_zdev_dasd_list"
}
diff -Naur a/zdev/dracut/95zdev/parse-zfcp.sh b/zdev/dracut/95zdev/parse-zfcp.sh
--- a/zdev/dracut/95zdev/parse-zfcp.sh 2025-12-11 17:03:28.000000000 +0100
+++ b/zdev/dracut/95zdev/parse-zfcp.sh 2026-02-12 10:49:05.939509610 +0100
@@ -11,26 +11,43 @@
#
zdev_zfcp_base_args="--no-settle --yes --no-root-update --force"
+zdev_vinfo() {
+ local _zdev_vinfo_line
+ while read -r _zdev_vinfo_line || [ -n "$_zdev_vinfo_line" ]; do
+ # Prefix "<30>" represents facility LOG_DAEMON 3 and loglevel INFO 6:
+ # (facility << 3) | level.
+ echo "<30>dracut: $_zdev_vinfo_line" > /dev/kmsg
+ done
+}
-for zdev_zfcp_arg in $(getargs rd.zfcp -d 'rd_ZFCP='); do
- (
- IFS_SAVED="$IFS"
- IFS="," # did not work in front of built-in set command below
- # shellcheck disable=SC2086
- set -- $zdev_zfcp_arg
- IFS=":" args="$*"
- IFS="$IFS_SAVED"
- echo "rd.zfcp ${zdev_zfcp_arg} :" | zdev_vinfo
- if [ "$#" -eq 1 ]; then
+# autodetect active bootdev from zipl device
+if ! getargbool 0 'rd.zfcp' \
+ && [[ -f /sys/firmware/ipl/ipl_type ]] \
+ && [[ $(< /sys/firmware/ipl/ipl_type) == "fcp" ]]; then
+ chzdev --offline --existing --enable --active $zdev_zfcp_base_args \
+ zfcp-host 2>&1 | zdev_vinfo
+else
+ for zdev_zfcp_arg in $(getargs rd.zfcp -d 'rd_ZFCP='); do
+ (
+ IFS_SAVED="$IFS"
+ IFS="," # did not work in front of built-in set command below
# shellcheck disable=SC2086
- chzdev --enable --persistent $zdev_zfcp_base_args \
- zfcp-host "$args" 2>&1 | zdev_vinfo
- else
- # shellcheck disable=SC2086
- chzdev --enable --persistent $zdev_zfcp_base_args \
- zfcp-lun "$args" 2>&1 | zdev_vinfo
- fi
- )
-done
+ set -- $zdev_zfcp_arg
+ IFS=":" args="$*"
+ IFS="$IFS_SAVED"
+ echo "rd.zfcp ${zdev_zfcp_arg} :" | zdev_vinfo
+ if [ "$#" -eq 1 ]; then
+ # shellcheck disable=SC2086
+ chzdev --enable --persistent $zdev_zfcp_base_args \
+ zfcp-host "$args" 2>&1 | zdev_vinfo
+ else
+ # shellcheck disable=SC2086
+ chzdev --enable --persistent $zdev_zfcp_base_args \
+ zfcp-lun "$args" 2>&1 | zdev_vinfo
+ fi
+ )
+ done
+fi
+
unset zdev_zfcp_arg
unset zdev_zfcp_base_args
diff -Naur a/zdev/dracut/95zdev-kdump/module-setup.sh b/zdev/dracut/95zdev-kdump/module-setup.sh
--- a/zdev/dracut/95zdev-kdump/module-setup.sh 2025-12-11 17:03:28.000000000 +0100
+++ b/zdev/dracut/95zdev-kdump/module-setup.sh 2026-02-06 14:20:29.803412303 +0100
@@ -78,6 +78,7 @@
inst_multiple /lib/s390-tools/zdev-from-dasd_mod.dasd
inst_rules "59-dasd.rules"
+ inst_rules "59-zfcp-compat.rules"
# Obtain kdump target device configuration
diff -Naur a/zdev/src/zdev-root-update.dracut b/zdev/src/zdev-root-update.dracut
--- a/zdev/src/zdev-root-update.dracut 2025-12-11 17:03:28.000000000 +0100
+++ b/zdev/src/zdev-root-update.dracut 2026-02-06 14:25:03.817945754 +0100
@@ -20,10 +20,4 @@
exit 1
}
-echo "Installing IPL record"
-zipl --noninteractive || {
- echo "${TOOLNAME}: Error: Could not install IPL record" >&2
- exit 1
-}
-
exit 0
diff -Naur a/zipl/boot/menu.c b/zipl/boot/menu.c
--- a/zipl/boot/menu.c 2025-12-11 17:03:28.000000000 +0100
+++ b/zipl/boot/menu.c 2026-02-06 14:29:07.392321346 +0100
@@ -191,8 +191,11 @@
/* print config list */
menu_list();
- if (is_zvm())
- printf("Note: VM users please use '#cp vi vmsg <input>'\n");
+ if (is_zvm()) {
+ printf(" \n");
+ printf("Note: VM users please use '#cp vi vmsg <input> <kernel-parameters>'\n");
+ printf(" \n");
+ }
value = menu_read();
Reference in New Issue View Git Blame Copy Permalink