e553b3bcf0
* s390-tools: Define Rust MSRV as 1.75.0
* Add new tools / libraries:
- cpacfinfo: Tool to provide CPACF information
- opticsmon: Tools to monitor optical modules for directly attached PCI based NICs
- pvimg: Rust rewrite of genprotimg
* Changes of existing tools:
- chpstat: Add data bandwidth utilization column
- chpstat: Add support for full CMCB
- chpstat: Add support for new CMG types
- dbginfo.sh: add overview commands and crypto update
- hyptop: Support for structured output (json, json-seq, csv)
- lszfcp: Add missing fallback marker for non-good fc_host port_state
- lszfcp: Improve speed with many SCSI devices
- pvattest: Add attestation policy check command
- zipl: Add support of partitions of mirror md-devices
* Bug Fixes:
- lszcrypt: Fix wrong state showing up for removed AP queue within SE guest
- lszfcp: Show device names line for zfcp_units without SCSI device
- Revendored vendor.tar.gz
- Applied additional patch (bsc#1233889, bsc#1233079)
* s390-tools-02-zipl-src-fix-imprecise-check-that-file-is-on-specifi.patch
- Applied a patch (bsc#1233889)
* s390-tools-01-zipl_helper.device-mapper-add-missed-step-in-logical.patch
- Amended the /usr/lib/modules-load.d/pkey.conf (bsc#1233233). Added
* pkey_cca
* pkey_ep11
* pkey_pckmo
OBS-URL: https://build.opensuse.org/package/show/Base:System/s390-tools?expand=0&rev=237
840 lines
28 KiB
RPMSpec
840 lines
28 KiB
RPMSpec
#
|
||
# spec file for package s390-tools
|
||
#
|
||
# Copyright (c) 2024 SUSE LLC
|
||
#
|
||
# All modifications and additions to the file contributed by third parties
|
||
# remain the property of their copyright owners, unless otherwise agreed
|
||
# upon. The license for this file, and modifications and additions to the
|
||
# file, is the same license as for the pristine package itself (unless the
|
||
# license for the pristine package is not an Open Source License, in which
|
||
# case the license is the MIT License). An "Open Source License" is a
|
||
# license that conforms to the Open Source Definition (Version 1.9)
|
||
# published by the Open Source Initiative.
|
||
|
||
# Please submit bugfixes or comments via https://bugs.opensuse.org/
|
||
#
|
||
# needssslcertforbuild
|
||
|
||
|
||
#Compat macro for new _fillupdir macro introduced in Nov 2017
|
||
%if ! %{defined _fillupdir}
|
||
%define _fillupdir %{_localstatedir}/adm/fillup-templates
|
||
%endif
|
||
%if 0%{?suse_version} < 1550 && 0%{?sle_version} <= 150300
|
||
# systemd-rpm-macros is wrong in 15.3 and below
|
||
%define _modprobedir /lib/modprobe.d
|
||
%endif
|
||
%global modprobe_d_files 90-s390-tools.conf
|
||
%if 0%{?suse_version} >= 1550
|
||
%define _mysbindir %{_sbindir}
|
||
%else
|
||
%define _mysbindir /sbin
|
||
%endif
|
||
|
||
Name: s390-tools
|
||
Version: 2.36.0
|
||
Release: 0
|
||
Summary: S/390 tools like zipl and dasdfmt for s390x (plus selected tools for x86_64)
|
||
License: MIT
|
||
Group: System/Kernel
|
||
URL: https://github.com/ibm-s390-tools/s390-tools
|
||
Source: https://github.com/ibm-s390-tools/s390-tools/archive/v%{version}.tar.gz#/s390-tools-%{version}.tar.gz
|
||
Source1: s390-tools-rpmlintrc
|
||
Source2: zipl.conf
|
||
Source3: hsnc
|
||
Source4: sysconfig.hsnc
|
||
Source5: xpram
|
||
Source6: sysconfig.xpram
|
||
Source7: appldata
|
||
Source8: sysconfig.appldata
|
||
Source10: dasdro
|
||
%if 0%{?suse_version} >= 1550
|
||
Source11: dasd_reload.opensuse
|
||
Source12: mkdump.pl.opensuse
|
||
%else
|
||
Source11: dasd_reload.suse
|
||
Source12: mkdump.pl.suse
|
||
%endif
|
||
Source13: sysconfig.osasnmpd
|
||
Source14: zfcp_san_disc
|
||
Source15: mkdump.8
|
||
Source18: zpxe.rexx
|
||
Source19: rules.xpram
|
||
Source20: rules.hw_random
|
||
%if 0%{?suse_version} >= 1550
|
||
Source21: 59-graf.rules.opensuse
|
||
%else
|
||
Source21: 59-graf.rules.suse
|
||
%endif
|
||
Source22: s390-tools-zdsfs.caution.txt
|
||
%if 0%{?suse_version} >= 1550
|
||
Source23: README.SUSE.opensuse
|
||
%else
|
||
Source23: README.SUSE.suse
|
||
%endif
|
||
Source24: cputype
|
||
Source25: cputype.1
|
||
Source26: cio_ignore.service
|
||
Source27: setup_cio_ignore.sh
|
||
Source28: 59-prng.rules
|
||
Source29: 59-zfcp-compat.rules
|
||
Source30: 90-s390-tools.conf
|
||
%if 0%{?suse_version} >= 1550
|
||
Source31: detach_disks.sh.opensuse
|
||
Source32: killcdl.opensuse
|
||
%else
|
||
Source31: detach_disks.sh.suse
|
||
Source32: killcdl.suse
|
||
%endif
|
||
Source33: lgr_check
|
||
Source34: sysconfig.virtsetup
|
||
Source35: virtsetup.service
|
||
%if 0%{?suse_version} >= 1550
|
||
Source36: virtsetup.sh.opensuse
|
||
%else
|
||
Source36: virtsetup.sh.suse
|
||
%endif
|
||
Source37: appldata.service
|
||
Source38: hsnc.service
|
||
%if 0%{?suse_version} >= 1550
|
||
Source39: vmlogrdr.service.opensuse
|
||
%else
|
||
Source39: vmlogrdr.service.suse
|
||
%endif
|
||
Source40: xpram.service
|
||
Source41: pkey.conf
|
||
|
||
### Obsolete scripts and man pages to be removed once changes in other tools are made
|
||
### That's been delayed to at least SLES12 SP1, but I'm leaving the comments here.
|
||
Source86: read_values.c
|
||
Source87: read_values.8
|
||
Source88: ctc_configure
|
||
%if 0%{?suse_version} >= 1550
|
||
Source89: dasd_configure.opensuse
|
||
Source90: iucv_configure.opensuse
|
||
%else
|
||
Source89: dasd_configure.suse
|
||
Source90: iucv_configure.suse
|
||
%endif
|
||
Source91: qeth_configure
|
||
Source92: zfcp_disk_configure
|
||
Source93: zfcp_host_configure
|
||
Source94: ctc_configure.8
|
||
Source95: dasd_configure.8
|
||
Source96: iucv_configure.8
|
||
Source97: qeth_configure.8
|
||
Source98: zfcp_disk_configure.8
|
||
Source99: zfcp_host_configure.8
|
||
###
|
||
Source200: cargo_config
|
||
Source201: vendor.tar.gz
|
||
###
|
||
|
||
###
|
||
# IBM patches
|
||
###
|
||
# SUSE patches
|
||
Patch900: s390-tools-sles12-zipl_boot_msg.patch
|
||
Patch901: s390-tools-sles15-sysconfig-compatible-dumpconf.patch
|
||
Patch902: s390-tools-sles12-create-filesystem-links.patch
|
||
%if 0%{?suse_version} >= 1550
|
||
Patch903: s390-tools-sles12-update-by_id-links-on-change-and-add-action.patch.opensuse
|
||
%else
|
||
Patch903: s390-tools-sles12-update-by_id-links-on-change-and-add-action.patch.suse
|
||
%endif
|
||
Patch904: s390-tools-sles15sp3-Allow-multiple-device-arguments.patch
|
||
Patch905: s390-tools-sles15sp3-Format-devices-in-parallel.patch
|
||
Patch906: s390-tools-sles15sp3-Implement-Y-yast_mode.patch
|
||
Patch907: s390-tools-sles15sp3-Implement-f-for-backwards-compability.patch
|
||
Patch908: s390-tools-sles15sp3-dasdfmt-retry-BIODASDINFO-if-device-is-busy.patch
|
||
Patch909: s390-tools-sles12-fdasd-skip-partition-check-and-BLKRRPART-ioctl.patch
|
||
Patch910: s390-tools-sles15sp1-11-zdev-Do-not-call-zipl-on-initrd-update.patch
|
||
Patch911: s390-tools-sles15sp5-remove-no-pie-link-arguments.patch
|
||
Patch912: s390-tools-ALP-zdev-live.patch
|
||
Patch913: s390-tools-sles15sp6-kdump-initrd-59-zfcp-compat-rules.patch
|
||
Patch914: s390-tools-01-zipl_helper.device-mapper-add-missed-step-in-logical.patch
|
||
Patch915: s390-tools-02-zipl-src-fix-imprecise-check-that-file-is-on-specifi.patch
|
||
###
|
||
Patch920: s390-tools-slfo-01-parse-ipl-device-for-activation.patch
|
||
###
|
||
|
||
BuildRequires: curl-devel
|
||
BuildRequires: dracut
|
||
BuildRequires: fuse3-devel
|
||
BuildRequires: gcc
|
||
BuildRequires: gcc-c++
|
||
BuildRequires: gettext-tools
|
||
BuildRequires: glib2-devel
|
||
BuildRequires: glibc-devel-static
|
||
BuildRequires: libcryptsetup-devel > 2.0.3
|
||
BuildRequires: libjson-c-devel
|
||
BuildRequires: libnl3-devel
|
||
BuildRequires: libxml2-devel
|
||
BuildRequires: mdevctl
|
||
BuildRequires: ncurses-devel
|
||
BuildRequires: net-snmp-devel
|
||
BuildRequires: openssl-devel >= 1.1.1l
|
||
BuildRequires: pesign-obs-integration
|
||
BuildRequires: systemd-devel
|
||
BuildRequires: tcpd-devel
|
||
BuildRequires: zlib-devel-static
|
||
### s390x
|
||
%ifarch s390x
|
||
BuildRequires: kernel-zfcpdump
|
||
BuildRequires: perl-Bootloader >= 0.4.15
|
||
BuildRequires: qclib-devel-static
|
||
%endif
|
||
### Cargo
|
||
BuildRequires: rust
|
||
BuildRequires: cargo
|
||
BuildRequires: cargo-packaging
|
||
BuildRequires: openssl
|
||
###
|
||
# Don't build with pie to avoid problems with zipl
|
||
#!BuildIgnore: gcc-PIE
|
||
Requires: coreutils
|
||
Requires: procps
|
||
Requires: util-linux
|
||
%ifarch s390x
|
||
Requires: gawk
|
||
Requires: perl-base
|
||
Requires: rsync
|
||
Requires: s390-tools-genprotimg-data
|
||
Requires: tar
|
||
%endif
|
||
Requires(post): %fillup_prereq
|
||
Requires(post): permissions
|
||
Requires(pre): shadow
|
||
Recommends: blktrace
|
||
Provides: s390utils:/sbin/dasdfmt
|
||
Provides: group(cpacfstats)
|
||
Provides: group(ts-shell)
|
||
Provides: group(zkeyadm)
|
||
%ifarch x86_64
|
||
Recommends: s390-tools-genprotimg-data
|
||
%endif
|
||
###
|
||
ExclusiveArch: s390x x86_64
|
||
|
||
%description
|
||
This package contains the tools (s390x, x86_64) needed to use Linux on IBM z Systems
|
||
and exploit many of the various capabilities of the hardware or z/VM. For example:
|
||
|
||
- s390x
|
||
dasdfmt - low-level format tool for ECKD DASD
|
||
fdasd - partitions ECKD DASDs with z/OS compatible disk layout
|
||
zipl - boot loader and dump DASD initializer
|
||
zgetdump - tool to get linux system dumps from DASD
|
||
|
||
- x86_64
|
||
pvimg - create a protected virtualization image (genprotimg)
|
||
pvattest - create, perform, and verify protected virtualization attestation measurements
|
||
pvsecret - manage secrets for IBM Secure Execution guests.
|
||
|
||
Warning: There is an auxiliary data package - s390-tools-genprotimg-data.
|
||
To install s390-tools properly, please use:
|
||
'sudo zypper install s390-tools s390-tools-genprotimg-data'
|
||
|
||
%package -n osasnmpd
|
||
Summary: OSA-Express SNMP subagent
|
||
License: GPL-2.0-or-later
|
||
Group: Productivity/Networking/Other
|
||
Requires: perl
|
||
|
||
%description -n osasnmpd
|
||
Supports management information bases (MIBs) provided by OSA-Express
|
||
Fast Ethernet, Gigabit Ethernet, High Speed Token Ring and ATM Ethernet
|
||
LAN Emulation features in QDIO mode.
|
||
|
||
It extends the capabilities of the net-snmp master agent (snmpd) and
|
||
communicates with him via the AgentX protocol.
|
||
|
||
%package zdsfs
|
||
Summary: QSAM access to z/OS data
|
||
License: GPL-2.0-or-later AND NonFree
|
||
Group: Productivity/Networking/Other
|
||
|
||
%description zdsfs
|
||
Use the zdsfs command for read access to z/OS data sets stored on one or more DASDs.
|
||
|
||
The zdsfs file system translates the record-based z/OS data sets to UNIX file system
|
||
semantics. After mounting the devices, you can use common Linux tools to access
|
||
the files on the disk. Physical sequential data sets are represented as files.
|
||
Partitioned data sets are represented as directories, with each member being
|
||
represented as a file in that directory.
|
||
|
||
%package hmcdrvfs
|
||
Summary: HMC drive file system based on FUSE
|
||
License: GPL-2.0-only
|
||
Group: System/Filesystems
|
||
Requires: fuse
|
||
|
||
%description hmcdrvfs
|
||
This package contains a HMC drive file system based on FUSE and a tool
|
||
to list files and directories.
|
||
|
||
%package -n libekmfweb1
|
||
Summary: IBM Enterprise Key Management Foundation - Web Edition client library
|
||
License: MIT
|
||
Group: System/Libraries
|
||
|
||
%description -n libekmfweb1
|
||
libekmfweb1 is a client library that provides access to IBM' Enterprise Key
|
||
Management Foundation – Web Edition.0 EKMF Web provides efficient and
|
||
security-rich centralized key management for IBM z/OS data set encryption
|
||
on IBM Z servers.
|
||
|
||
%package -n libekmfweb1-devel
|
||
Summary: IBM Enterprise Key Management Foundation - Web Edition client library
|
||
License: MIT
|
||
Group: Development/Libraries/C and C++
|
||
Requires: libekmfweb1 = %{version}
|
||
|
||
%description -n libekmfweb1-devel
|
||
libekmfweb1 is a client library that provides access to IBM' Enterprise Key
|
||
Management Foundation – Web Edition.0 EKMF Web provides efficient and
|
||
security-rich centralized key management for IBM z/OS data set encryption
|
||
on IBM Z servers.
|
||
|
||
%package -n libkmipclient1
|
||
Summary: IBM Key Management Interoperability Protocol (KMIP) client library
|
||
License: MIT
|
||
Group: System/Libraries
|
||
|
||
%description -n libkmipclient1
|
||
Key Management Interoperability Protocol (KMIP) is a client/server
|
||
communication protocol for the storage and maintenance of key,
|
||
certificate, and secret objects. This client library enables secure
|
||
creation and storage of cryptographic objects on the IBM Security Key
|
||
Lifecycle Manager server. You must configure client devices to connect
|
||
to the server for key management operations.
|
||
|
||
%package -n libkmipclient1-devel
|
||
Summary: Header files for the IBM Z KMIP client library
|
||
License: MIT
|
||
Group: Development/Libraries/C and C++
|
||
Requires: libkmipclient1 = %{version}
|
||
|
||
%description -n libkmipclient1-devel
|
||
This package provides the header files and symbolic link to the
|
||
shared library for the IBM Z KMIP client library.
|
||
|
||
%package chreipl-fcp-mpath
|
||
Summary: Use multipath information for re-IPL path failover
|
||
License: MIT
|
||
Group: System/Boot
|
||
BuildRequires: bash
|
||
BuildRequires: coreutils
|
||
## Required for build+install with ENABLE_DOC=1
|
||
#BuildRequires: pandoc
|
||
BuildRequires: sed
|
||
#BuildRequires: gawk
|
||
#BuildRequires: gzip
|
||
Requires: bash
|
||
# Required for use with HAVE_DRACUT=1
|
||
Requires: dracut
|
||
Requires: multipath-tools
|
||
Requires: udev
|
||
Requires(post): udev
|
||
|
||
%description chreipl-fcp-mpath
|
||
The chreipl-fcp-mpath toolset monitors udev events about paths to the
|
||
re-IPL volume. If the currently configured FCP re-IPL path becomes
|
||
unavailable, the toolset checks for operational paths to the same
|
||
volume. If available, it reconfigures the FCP re-IPL settings to use an
|
||
operational path.
|
||
|
||
%package genprotimg-data
|
||
Summary: Auxiliary data used by genprotimg
|
||
License: MIT
|
||
Group: System/Boot
|
||
BuildArch: noarch
|
||
Requires(pre): filesystem
|
||
|
||
%description genprotimg-data
|
||
The pvimg (genprotimg) allows preparing and analyzing boot images
|
||
in the realm of IBM Secure Execution on a trusted environment,
|
||
such as the laptop of an admin by limiting the build targets
|
||
depending on the defined or detected host architecture.
|
||
This package provides auxiliary data used by pvimg(genprotimg).
|
||
|
||
### *** s390x ************************************************************************* ###
|
||
%ifarch s390x
|
||
|
||
%prep
|
||
%autosetup -p1
|
||
|
||
cp -vi %{SOURCE22} CAUTION
|
||
|
||
install -D -m 0644 %{SOURCE200} .cargo/config.toml
|
||
tar -xzf %{SOURCE201}
|
||
|
||
%build
|
||
|
||
# The "DISTRELEASE=%%{release}" needs to be on both the make and make install
|
||
# commands, since make install runs sed commands against various scripts to
|
||
# modify the "-v" output appropriately.
|
||
|
||
export OPT_FLAGS="%{optflags}"
|
||
export KERNELIMAGE_MAKEFLAGS="%%{?_smp_mflags}"
|
||
|
||
%make_build \
|
||
ZFCPDUMP_DIR=%{_prefix}/lib/s390-tools/zfcpdump \
|
||
DISTRELEASE=%{release} \
|
||
UDEVRUNDIR=/run/udev \
|
||
HAVE_CARGO=1 \
|
||
HAVE_DRACUT=1
|
||
### all
|
||
gcc -static -o read_values ${OPT_FLAGS} %{SOURCE86} -lqc
|
||
|
||
%install
|
||
mkdir -p %{buildroot}/boot/zipl
|
||
mkdir -p %{buildroot}%{_sysconfdir}/zkey/repository
|
||
%make_install \
|
||
ZFCPDUMP_DIR=%{_prefix}/lib/s390-tools/zfcpdump \
|
||
DISTRELEASE=%{release} \
|
||
SYSTEMDSYSTEMUNITDIR=%{_unitdir} \
|
||
UDEVRUNDIR=/run/udev \
|
||
HAVE_CARGO=1 \
|
||
HAVE_DRACUT=1
|
||
### all
|
||
|
||
# The make install command puts things in /etc/sysconfig and not the
|
||
# fillup-templates directory. Let's try moving them where they belong
|
||
mkdir -p %{buildroot}%{_fillupdir}
|
||
pushd %{buildroot}%{_sysconfdir}/sysconfig/
|
||
for sysconffile in *
|
||
do mv -vi $sysconffile %{buildroot}%{_fillupdir}/sysconfig.$sysconffile
|
||
done
|
||
popd
|
||
|
||
install -m 755 read_values %{buildroot}/%{_bindir}/
|
||
install -m644 -t %{buildroot}/%{_mandir}/man8 %{SOURCE87}
|
||
|
||
# The "usrmerge" has happened in openSUSE:Factory, but not yet in SLES.
|
||
# Make sure we look for the zfcpdump kernel image in the right place.
|
||
%if 0%{?suse_version} >= 1550
|
||
install -D -m600 %{_prefix}/lib/modules/*-zfcpdump/image %{buildroot}%{_prefix}/lib/s390-tools/zfcpdump/zfcpdump-image
|
||
%else
|
||
install -D -m600 /boot/image-*-zfcpdump %{buildroot}%{_prefix}/lib/s390-tools/zfcpdump/zfcpdump-image
|
||
%endif
|
||
|
||
install -D -m644 etc/cpuplugd.conf %{buildroot}%{_sysconfdir}/cpuplugd.conf
|
||
install -D -m644 etc/udev/rules.d/40-z90crypt.rules %{buildroot}%{_prefix}/lib/udev/rules.d/40-z90crypt.rules
|
||
install -D -m644 etc/udev/rules.d/57-osasnmpd.rules %{buildroot}%{_prefix}/lib/udev/rules.d/57-osasnmpd.rules
|
||
install -D -m644 etc/udev/rules.d/59-dasd.rules %{buildroot}%{_prefix}/lib/udev/rules.d/59-dasd.rules
|
||
install -D -m644 etc/udev/rules.d/90-cpi.rules %{buildroot}%{_prefix}/lib/udev/rules.d/90-cpi.rules
|
||
mv iucvterm/doc/ts-shell/iucvconn_on_login %{buildroot}%{_bindir}/iucvconn_on_login
|
||
install -D -m644 %{SOURCE26} %{buildroot}/%{_unitdir}/cio_ignore.service
|
||
install -D -m755 %{SOURCE27} %{buildroot}%{_prefix}/lib/systemd/scripts/setup_cio_ignore.sh
|
||
install -D -m755 %{SOURCE31} %{buildroot}%{_prefix}/lib/systemd/scripts/detach_disks.sh
|
||
install -D -m644 %{SOURCE35} %{buildroot}/%{_unitdir}/virtsetup.service
|
||
install -D -m755 %{SOURCE36} %{buildroot}%{_prefix}/lib/systemd/scripts/virtsetup.sh
|
||
install -D -m644 %{SOURCE37} %{buildroot}/%{_unitdir}/appldata.service
|
||
install -D -m644 %{SOURCE38} %{buildroot}/%{_unitdir}/hsnc.service
|
||
install -D -m644 %{SOURCE39} %{buildroot}/%{_unitdir}/vmlogrdr.service
|
||
install -D -m644 %{SOURCE40} %{buildroot}/%{_unitdir}/xpram.service
|
||
install -D -m644 %{SOURCE41} %{buildroot}%{_prefix}/lib/modules-load.d/pkey.conf
|
||
|
||
cp %{SOURCE18} zpxe.rexx
|
||
cp %{SOURCE2} zipl.conf.sample
|
||
cp %{SOURCE23} README.SUSE
|
||
|
||
cd %{buildroot}
|
||
install -D -m755 %{SOURCE3} %{buildroot}%{_prefix}/lib/systemd/scripts/hsnc
|
||
install -D -m644 %{SOURCE4} %{buildroot}%{_fillupdir}/sysconfig.hsnc
|
||
install -D -m755 %{SOURCE5} %{buildroot}%{_prefix}/lib/systemd/scripts/xpram
|
||
install -D -m644 %{SOURCE6} %{buildroot}%{_fillupdir}/sysconfig.xpram
|
||
install -D -m755 %{SOURCE7} %{buildroot}%{_prefix}/lib/systemd/scripts/appldata
|
||
install -D -m644 %{SOURCE8} %{buildroot}%{_fillupdir}/sysconfig.appldata
|
||
install -D -m755 %{SOURCE10} %{buildroot}%{_mysbindir}/dasdro
|
||
install -D -m755 %{SOURCE11} %{buildroot}%{_mysbindir}/dasd_reload
|
||
install -D -m755 %{SOURCE12} %{buildroot}%{_mysbindir}/mkdump
|
||
install -D -m644 %{SOURCE13} %{buildroot}%{_fillupdir}/sysconfig.osasnmpd
|
||
install -D -m755 %{SOURCE14} %{buildroot}%{_mysbindir}/zfcp_san_disc
|
||
install -D -m644 %{SOURCE15} %{buildroot}/%{_mandir}/man8
|
||
install -D -m644 %{SOURCE19} %{buildroot}%{_prefix}/lib/udev/rules.d/52-xpram.rules
|
||
install -D -m644 %{SOURCE20} %{buildroot}%{_prefix}/lib/udev/rules.d/52-hw_random.rules
|
||
install -D -m644 %{SOURCE21} %{buildroot}%{_prefix}/lib/udev/rules.d/59-graf.rules
|
||
install -D -m644 %{SOURCE28} %{buildroot}%{_prefix}/lib/udev/rules.d/59-prng.rules
|
||
install -D -m644 %{SOURCE29} %{buildroot}%{_prefix}/lib/udev/rules.d/59-zfcp-compat.rules
|
||
install -D -m644 %{SOURCE30} %{buildroot}%{_modprobedir}/90-s390-tools.conf
|
||
install -D -m755 %{SOURCE32} %{buildroot}%{_mysbindir}/killcdl
|
||
install -D -m755 %{SOURCE33} %{buildroot}%{_mysbindir}/lgr_check
|
||
install -D -m644 %{SOURCE34} %{buildroot}%{_fillupdir}/sysconfig.virtsetup
|
||
|
||
if [ ! -d %{_mysbindir} ]; then
|
||
rm -f %{_mysbindir}
|
||
mkdir -p %{_mysbindir}
|
||
fi
|
||
(cd %{buildroot}%{_sbindir}; ln -s service rcappldata)
|
||
(cd %{buildroot}%{_sbindir}; ln -s service rchsnc)
|
||
(cd %{buildroot}%{_sbindir}; ln -s service rcvmlogrdr)
|
||
(cd %{buildroot}%{_sbindir}; ln -s service rcxpram)
|
||
(cd %{buildroot}%{_sbindir}; ln -s service rccio_ignore)
|
||
(cd %{buildroot}%{_sbindir}; ln -s service rccpacfstatsd)
|
||
(cd %{buildroot}%{_sbindir}; ln -s service rccpi)
|
||
(cd %{buildroot}%{_sbindir}; ln -s service rccpuplugd)
|
||
(cd %{buildroot}%{_sbindir}; ln -s service rcdumpconf)
|
||
(cd %{buildroot}%{_sbindir}; ln -s service rcmon_fsstatd)
|
||
(cd %{buildroot}%{_sbindir}; ln -s service rcmon_procd)
|
||
(cd %{buildroot}%{_sbindir}; ln -s service rcvirtsetup)
|
||
|
||
if [ ! -d %{_bindir} ]; then
|
||
rm -f %{_bindir}
|
||
mkdir -p %{_bindir}
|
||
fi
|
||
install -D -m755 %{SOURCE24} %{buildroot}%{_bindir}/cputype
|
||
|
||
install -m644 -t %{buildroot}/%{_mandir}/man8 %{SOURCE25}
|
||
|
||
# If building for openSUSE, move all the binaries installed via
|
||
# the IBM-provided Makefile from /sbin to /usr/sbin/ to
|
||
# align with the openSUSE "usrmerge" project
|
||
%if 0%{?suse_version} >= 1550
|
||
mv -vi %{buildroot}/sbin/* %{buildroot}%{_mysbindir}/
|
||
%endif
|
||
|
||
### Obsolete scripts and man pages to be removed once changes in other tools are made
|
||
install -m755 -t %{buildroot}%{_mysbindir}/ %{SOURCE88} %{SOURCE91} %{SOURCE92} %{SOURCE93}
|
||
install %{SOURCE89} %{buildroot}%{_mysbindir}/dasd_configure
|
||
install %{SOURCE90} %{buildroot}%{_mysbindir}/iucv_configure
|
||
install -m644 -t %{buildroot}/%{_mandir}/man8 %{SOURCE94} %{SOURCE95} %{SOURCE96} %{SOURCE97} %{SOURCE98} %{SOURCE99}
|
||
###
|
||
|
||
### lsmem/chmem have been added to util-linux
|
||
rm -fv %{buildroot}%{_mandir}/man8/lsmem.8*
|
||
rm -fv %{buildroot}%{_mandir}/man8/chmem.8*
|
||
rm -fv %{buildroot}%{_mysbindir}/lsmem
|
||
rm -fv %{buildroot}%{_mysbindir}/chmem
|
||
|
||
###
|
||
find . ! -type d |
|
||
sed 's/^.//;\-/man/-s/^.*$/%doc &.gz/' > %{_builddir}/%{name}-filelist
|
||
grep -v -E 'osasnmp|etc/ziplenv|\.conf$|ekmfweb.so|ekmfweb.h|kmipclient|kmip/profiles/.*profile$|chreipl-fcp-mpath' %{_builddir}/%{name}-filelist >%{_builddir}/%{name}.list
|
||
grep osasnmp[^-] %{_builddir}/%{name}-filelist >%{_builddir}/%{name}.osasnmp
|
||
|
||
touch boot/zipl/active_devices.txt
|
||
mkdir -p ./%{_libexecdir}/net-snmp/agents
|
||
cd ./%{_libexecdir}/net-snmp/agents
|
||
cat <<EOT >osasnmpd
|
||
#!/bin/sh
|
||
PIDFILE=%{_localstatedir}/run/osasnmpd.pid
|
||
function cleanup
|
||
{
|
||
rm -f \$PIDFILE
|
||
kill \`cat %{_localstatedir}/run/osasnmpd.real.pid\`
|
||
}
|
||
. %{_sysconfdir}/sysconfig/osasnmpd
|
||
trap cleanup 0
|
||
echo \$\$ >\$PIDFILE
|
||
%{_mysbindir}/osasnmpd -f -P %{_localstatedir}/run/osasnmpd.real.pid \$OSASNMPD_PARAMETERS "\$@"
|
||
EOT
|
||
chmod 755 osasnmpd
|
||
|
||
export BRP_PESIGN_FILES='/lib/s390-tools/stage3.bin'
|
||
|
||
%verifyscript
|
||
%verify_permissions -e %{_localstatedir}/log/ts-shell/
|
||
|
||
%pre
|
||
# check for ts-shell group or create it
|
||
getent group ts-shell >/dev/null 2>&1 || groupadd -r ts-shell
|
||
# check for zkeyadm group or create it
|
||
getent group zkeyadm >/dev/null 2>&1 || groupadd -r zkeyadm
|
||
# check for cpacfstats group or create it
|
||
getent group cpacfstats >/dev/null 2>&1 || groupadd -r cpacfstats
|
||
%service_add_pre appldata.service
|
||
%service_add_pre cio_ignore.service
|
||
%service_add_pre cpacfstatsd.service
|
||
%service_add_pre cpi.service
|
||
%service_add_pre cpuplugd.service
|
||
%service_add_pre dumpconf.service
|
||
%service_add_pre hsnc.service
|
||
%service_add_pre mon_fsstatd.service
|
||
%service_add_pre mon_procd.service
|
||
%service_add_pre virtsetup.service
|
||
%service_add_pre vmlogrdr.service
|
||
%service_add_pre xpram.service
|
||
# Avoid restoring outdated stuff in posttrans
|
||
for _f in %{?modprobe_d_files}; do
|
||
[ ! -f "/etc/modprobe.d/${_f}.rpmsave" ] || \
|
||
mv -f "/etc/modprobe.d/${_f}.rpmsave" "/etc/modprobe.d/${_f}.rpmsave.old" || :
|
||
done
|
||
|
||
%post
|
||
read INITPGM < /proc/1/comm
|
||
if [ "${INITPGM}" = "systemd" ]; then
|
||
echo "Running systemctl daemon-reload."
|
||
systemctl daemon-reload
|
||
fi
|
||
|
||
%set_permissions %{_localstatedir}/log/ts-shell/
|
||
|
||
# Create symbolic links to the scripts from setup and boot directories
|
||
%service_add_post appldata.service
|
||
%service_add_post cio_ignore.service
|
||
%service_add_post cpacfstatsd.service
|
||
%service_add_post cpi.service
|
||
%service_add_post cpuplugd.service
|
||
%service_add_post dumpconf.service
|
||
%service_add_post hsnc.service
|
||
%service_add_post mon_fsstatd.service
|
||
%service_add_post mon_procd.service
|
||
%service_add_post virtsetup.service
|
||
%service_add_post vmlogrdr.service
|
||
%service_add_post xpram.service
|
||
|
||
# Create the initial versions of the sysconfig files:
|
||
%{fillup_only -n appldata}
|
||
%{fillup_only -n cpi}
|
||
%{fillup_only -n dumpconf}
|
||
%{fillup_only -n hsnc}
|
||
%{fillup_only -n mon_fsstatd}
|
||
%{fillup_only -n mon_procd}
|
||
%{fillup_only -n mon_statd}
|
||
%{fillup_only -n virtsetup}
|
||
%{fillup_only -n xpram}
|
||
|
||
%triggerin -- kernel-default
|
||
grep -q '^%{_bindir}/ts-shell$' %{_sysconfdir}/shells \
|
||
|| echo "%{_bindir}/ts-shell" >> %{_sysconfdir}/shells
|
||
|
||
%{?regenerate_initrd_post}
|
||
|
||
%post -n osasnmpd
|
||
%{fillup_only -n osasnmpd}
|
||
|
||
%post -n libekmfweb1
|
||
ldconfig
|
||
|
||
%post -n libkmipclient1
|
||
ldconfig
|
||
|
||
%post chreipl-fcp-mpath
|
||
%udev_rules_update
|
||
|
||
%preun
|
||
%service_del_preun appldata.service
|
||
%service_del_preun cio_ignore.service
|
||
%service_del_preun cpacfstatsd.service
|
||
%service_del_preun cpi.service
|
||
%service_del_preun cpuplugd.service
|
||
%service_del_preun dumpconf.service
|
||
%service_del_preun hsnc.service
|
||
%service_del_preun mon_fsstatd.service
|
||
%service_del_preun mon_procd.service
|
||
%service_del_preun virtsetup.service
|
||
%service_del_preun vmlogrdr.service
|
||
%service_del_preun xpram.service
|
||
|
||
%postun
|
||
%service_del_postun appldata.service
|
||
%service_del_postun cio_ignore.service
|
||
%service_del_postun cpacfstatsd.service
|
||
%service_del_postun cpi.service
|
||
%service_del_postun cpuplugd.service
|
||
%service_del_postun dumpconf.service
|
||
%service_del_postun hsnc.service
|
||
%service_del_postun mon_fsstatd.service
|
||
%service_del_postun mon_procd.service
|
||
%service_del_postun virtsetup.service
|
||
%service_del_postun vmlogrdr.service
|
||
%service_del_postun xpram.service
|
||
|
||
%postun -n libekmfweb1
|
||
ldconfig
|
||
|
||
%postun -n libkmipclient1
|
||
ldconfig
|
||
|
||
# Even though SLES15+ is systemd based, the build service doesn't
|
||
# run it, so we have to make sure we can safely issue the
|
||
# systemctl command.
|
||
read INITPGM < /proc/1/comm
|
||
if [ "${INITPGM}" = "systemd" ]; then
|
||
echo "Running systemctl daemon-reload."
|
||
systemctl daemon-reload
|
||
fi
|
||
|
||
if [ ! -x /boot/zipl ]; then
|
||
echo "Attention, after uninstalling this package,"
|
||
echo "you will NOT be able to IPL from DASD anymore!!!"
|
||
fi
|
||
|
||
if test x$1 = x0; then
|
||
# remove ts-shell from /etc/shells
|
||
grep -v '^%{_bindir}/ts-shell$' %{_sysconfdir}/shells > %{_sysconfdir}/shells.ts-new
|
||
mv %{_sysconfdir}/shells.ts-new %{_sysconfdir}/shells
|
||
chmod 0644 %{_sysconfdir}/shells
|
||
fi
|
||
|
||
%{?regenerate_initrd_post}
|
||
|
||
%posttrans
|
||
# Migration of modprobe.conf files to _modprobedir
|
||
for _f in %{?modprobe_d_files}; do
|
||
[ ! -f "/etc/modprobe.d/${_f}.rpmsave" ] || \
|
||
mv -fv "/etc/modprobe.d/${_f}.rpmsave" "/etc/modprobe.d/${_f}" || :
|
||
done
|
||
%{?regenerate_initrd_posttrans}
|
||
|
||
%preun -n osasnmpd
|
||
%{stop_on_removal osasnmpd}
|
||
|
||
%files -f %{_builddir}/%{name}.list
|
||
|
||
%doc README.md
|
||
%doc README.SUSE
|
||
|
||
%doc iucvterm/doc/ts-shell
|
||
%doc zpxe.rexx
|
||
%doc zipl.conf.sample
|
||
%dir %{_sysconfdir}/iucvterm
|
||
%config %attr(0640,root,ts-shell) %{_sysconfdir}/iucvterm/ts-audit-systems.conf
|
||
%config %attr(0640,root,ts-shell) %{_sysconfdir}/iucvterm/ts-authorization.conf
|
||
%config %attr(0640,root,ts-shell) %{_sysconfdir}/iucvterm/ts-shell.conf
|
||
%config %attr(0640,root,ts-shell) %{_sysconfdir}/iucvterm/unrestricted.conf
|
||
%dir %attr(0770,root,zkeyadm) %{_sysconfdir}/zkey
|
||
%dir %attr(0770,root,zkeyadm) %{_sysconfdir}/zkey/kmip
|
||
%dir %attr(0770,root,zkeyadm) %{_sysconfdir}/zkey/kmip/profiles
|
||
%dir %attr(0770,root,zkeyadm) %{_sysconfdir}/zkey/repository
|
||
%config %{_sysconfdir}/zkey/kmip/profiles/*
|
||
%config(noreplace) %{_sysconfdir}/ziplenv
|
||
%dir %{_modprobedir}
|
||
%{_modprobedir}/90-s390-tools.conf
|
||
%config %{_sysconfdir}/cpuplugd.conf
|
||
%config %{_sysconfdir}/zkey/kms-plugins.conf
|
||
%config(noreplace) /boot/zipl/active_devices.txt
|
||
%dir %attr(2770,root,ts-shell) %{_localstatedir}/log/ts-shell
|
||
%dir %{_sysconfdir}/cmsfs-fuse
|
||
%config %attr(0640,root,root) %{_sysconfdir}/cmsfs-fuse/filetypes.conf
|
||
%dir %{_prefix}/lib/mdevctl
|
||
%dir %{_prefix}/lib/mdevctl/scripts.d
|
||
%dir %{_prefix}/lib/mdevctl/scripts.d/callouts
|
||
%dir %{_prefix}/lib/s390-tools
|
||
%dir %{_prefix}/lib/s390-tools/zfcpdump
|
||
%dir %{_prefix}/lib/udev/rules.d
|
||
%dir %{_prefix}/lib/systemd/scripts
|
||
%dir %{_datadir}/s390-tools
|
||
%dir %{_datadir}/s390-tools/netboot
|
||
%dir %{_prefix}/lib/dracut/modules.d/95zdev
|
||
%dir %{_prefix}/lib/dracut/modules.d/95zdev-kdump
|
||
%dir %{_prefix}/lib/dracut/modules.d/96zdev-live
|
||
%dir %{_prefix}/lib/dracut/modules.d/99ngdump
|
||
%dir /boot/zipl
|
||
%dir %{_libdir}/zkey
|
||
%{_libdir}/zkey/zkey-ekmfweb.so
|
||
%dir /lib/s390-tools/
|
||
/lib/s390-tools/zipl.conf
|
||
%{_prefix}/lib/modules-load.d/pkey.conf
|
||
%exclude %{_prefix}/lib/udev/rules.d/57-osasnmpd.rules
|
||
%exclude %{_bindir}/zdsfs
|
||
%exclude %{_bindir}/hmcdrvfs
|
||
%exclude %{_sbindir}/lshmc
|
||
%exclude %{_mandir}/man1/zdsfs.1.gz
|
||
%exclude %{_mandir}/man1/hmcdrvfs.1.gz
|
||
%exclude %{_mandir}/man8/lshmc.8.gz
|
||
###
|
||
%dir /etc/mdevctl.d/scripts.d/
|
||
%dir /etc/mdevctl.d/scripts.d/callouts/
|
||
###
|
||
%exclude /lib/s390-tools/stage3.bin
|
||
%exclude %{_datadir}/s390-tools/pvimg/stage3a.bin
|
||
%exclude %{_datadir}/s390-tools/pvimg/stage3b_reloc.bin
|
||
###
|
||
|
||
%files -n osasnmpd -f %{_builddir}/%{name}.osasnmp
|
||
%{_libexecdir}/net-snmp/agents/osasnmpd
|
||
|
||
%files zdsfs
|
||
%doc CAUTION
|
||
%{_bindir}/zdsfs
|
||
%{_mandir}/man1/zdsfs.1%{?ext_man}
|
||
|
||
%files hmcdrvfs
|
||
%{_bindir}/hmcdrvfs
|
||
%{_sbindir}/lshmc
|
||
%{_mandir}/man1/hmcdrvfs.1%{?ext_man}
|
||
%{_mandir}/man8/lshmc.8%{?ext_man}
|
||
|
||
%files -n libekmfweb1
|
||
%{_libdir}/libekmfweb.so.*
|
||
|
||
%files -n libekmfweb1-devel
|
||
%{_libdir}/libekmfweb.so
|
||
%dir %attr(755,root,root) %{_includedir}/ekmfweb
|
||
%attr(644,root,root) %{_includedir}/ekmfweb/ekmfweb.h
|
||
|
||
%files -n libkmipclient1
|
||
%{_libdir}/libkmipclient.so.*
|
||
|
||
%files -n libkmipclient1-devel
|
||
%{_libdir}/libkmipclient.so
|
||
%dir %attr(755,root,root) %{_includedir}/kmipclient
|
||
%attr(644,root,root) %{_includedir}/kmipclient/kmipclient.h
|
||
|
||
%files chreipl-fcp-mpath
|
||
%doc chreipl-fcp-mpath/README.md
|
||
## Requires build+install with ENABLE_DOC=1
|
||
#doc chreipl-fcp-mpath/README.html
|
||
%dir %{_prefix}/lib/chreipl-fcp-mpath/
|
||
%{_prefix}/lib/chreipl-fcp-mpath/*
|
||
%{_prefix}/lib/dracut/dracut.conf.d/70-chreipl-fcp-mpath.conf
|
||
%{_prefix}/lib/udev/chreipl-fcp-mpath-is-ipl-tgt
|
||
%{_prefix}/lib/udev/chreipl-fcp-mpath-is-ipl-vol
|
||
%{_prefix}/lib/udev/chreipl-fcp-mpath-is-reipl-zfcp
|
||
%{_prefix}/lib/udev/chreipl-fcp-mpath-record-volume-identifier
|
||
%{_prefix}/lib/udev/chreipl-fcp-mpath-try-change-ipl-path
|
||
%{_udevrulesdir}/70-chreipl-fcp-mpath.rules
|
||
%{_mandir}/man7/chreipl-fcp-mpath.7%{?ext_man}
|
||
|
||
### genprotimg
|
||
%files genprotimg-data
|
||
/lib/s390-tools/stage3.bin
|
||
%dir %{_datadir}/s390-tools/pvimg
|
||
%{_datadir}/s390-tools/pvimg/stage3a.bin
|
||
%{_datadir}/s390-tools/pvimg/stage3b_reloc.bin
|
||
|
||
### _endif
|
||
### *** !s390x ************************************************************************* ###
|
||
### _ifarch x86_64
|
||
%else
|
||
|
||
%prep
|
||
%autosetup -p1
|
||
|
||
install -D -m 0644 %{SOURCE200} .cargo/config
|
||
tar -xzf %{SOURCE201}
|
||
|
||
%build
|
||
export OPT_FLAGS="%{optflags}"
|
||
export KERNELIMAGE_MAKEFLAGS="%%{?_smp_mflags}"
|
||
|
||
%make_build \
|
||
DISTRELEASE=%{release} \
|
||
UDEVRUNDIR=/run/udev \
|
||
HAVE_CARGO=1 \
|
||
HAVE_DRACUT=1
|
||
|
||
%install
|
||
|
||
%make_install \
|
||
DISTRELEASE=%{release} \
|
||
SYSTEMDSYSTEMUNITDIR=%{_unitdir} \
|
||
UDEVRUNDIR=/run/udev \
|
||
HAVE_CARGO=1 \
|
||
HAVE_DRACUT=1
|
||
|
||
%files
|
||
%{_prefix}/bin/*
|
||
%dir %{_datadir}/s390-tools
|
||
%dir %{_datadir}/s390-tools/pvimg
|
||
%{_datadir}/s390-tools/pvimg/check_hostkeydoc
|
||
%{_mandir}/man1/*
|
||
|
||
%endif
|
||
|
||
%changelog
|