pool/sane-backends
SHA256
2
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
92ab6a35be
sane-backends/sane-backends.changes

1646 lines
64 KiB
Plaintext
Raw Blame History

-------------------------------------------------------------------
Tue Oct 6 10:55:10 CEST 2015 - jsmeix@suse.de
- Upgraded to sane-backends version 1.0.25:
Changes since 1.0.24:
* New backends: epsonds (Epson DS, PX and WF series),
pieusb (PIE and Reflecta film/slide scanners).
* Support for JPG and PNG output format in scanimage.
* Significant enhancements to avision, canon_dr, epjitsu,
fujitsu, genesys, kodakaio and pixma backends.
* Minor updates, bugfixes or scanners added in several backends.
* 300 new scanner models supported.
* Workaround for USB3 problems in Linux kernel.
* Added code for IR functionality.
* Documentation and translation updates.
* Bugfixes (threading, networking, udev rules).
A big thanks to Olaf Meeuwissen, for his efforts in bug triage,
patch wrangling and code cleanups.
- fix-buffer-overflow.patch, fix-mustek_pp_ccd300.c.patch,
install-umax_pp-tool.patch, MG5550-works.patch are obsolete
since sane-backends-1.0.24 because it is fixed in the source.
- re-add-SANE_CAP_ALWAYS_SETTABLE.patch should be longer needed
because there should be longer a fontend that references
SANE_CAP_ALWAYS_SETTABLE in its source code.
- Recreated adapt_epkowa.desc_for_yast2-scanner.patch
according to the comment in sane-backends.spec
so that it applies for sane-backends-1.0.25.
- Dropped avision.c.patch and avision.conf.patch
(cf. the entry below dated "Mon Sep 15 23:23:23 UTC 2013")
because it does no longer apply to sane-backends-1.0.25 sources.
Issues that are not specific for a particular Linux distribution
must be fixed directly at SANE upstream so that all Linux
distributions get it properly fixed and not via patches
at one particular Linux distribution where it falls apart
each time when SANE upstream changes that sources.
- Added BuildRequires for libpng-devel and libtiff-devel because
scanimage output format supports PNG and TIFF.
- dell1600n_net-fix-strncat.patch fixes the following build error:
Statement might be overflowing a buffer in strncat.
BAD: strncat(buffer,charptr,sizeof(buffer)) is wrong
GOOD: strncat(buffer,charptr,sizeof(buffer)-strlen(buffer)-1)
The upstream issue report is
https://alioth.debian.org/tracker/index.php?func=detail&aid=315198&group_id=30186&atid=410366
- Disabled use of LaTeX to generate documentation because LaTeX
blows up the build system and "BuildRequires: texlive-latex"
causes various cycles and the sane.ps documentation
is not for users but for developers who could get
the "Programmer's Documentation" from SANE upstream
at http://www.sane-project.org/docs.html
-------------------------------------------------------------------
Wed Jan 14 12:41:18 UTC 2015 - johannes@lst.de
- MG5550-works.patch: support Canon Pixma MG5500
-------------------------------------------------------------------
Tue Dec 3 11:09:25 CET 2013 - jsmeix@suse.de
- Upgraded to sane-backends version 1.0.24:
Changes since 1.0.23:
* Significant enhancements to pixma, genesys, kodakaio,
fujitsu, canon_dr.
* Minor updates, bugfixes or scanners added in several backends.
* Added new testsuite.
* 51 new scanner models supported.
* USB support improvements.
* Improved build system (mingw64, bug fixes,
default pthread on Linux).
* Documentation updates.
* Bugfixes.
For Details see the ChangeLog file.
- sane-backends-1.0.21-SCX4500W.patch that adds usb id for SCX4500W
is obsolete since sane-backends-1.0.24 because it is fixed
in the source.
- fix-no-return-in-nonvoid-function.patch that fixes a
"control reaches end of non-void function" gcc warning
in kodakaio.c is obsolete since sane-backends-1.0.24
because it is fixed in the source.
- Recreated adapt_epkowa.desc_for_yast2-scanner.patch
according to the comment in sane-backends.spec
so that it applies for sane-backends-1.0.24.
-------------------------------------------------------------------
Mon Sep 15 23:23:23 UTC 2013 - piny@gmx.com
- Workaround for hp scanjet 8200: As described in
https://bugzilla.novell.com/show_bug.cgi?id=840443
when operating on a hp scanjet 8200 the avision driver gets stuck
in a loop trying to detect an ADF, even if none is present.
In order circumvent this issue, following workaround has been
implemented:
1) create an option "enforce-no-adf" in the file avision.conf
2) patch the code in avision.c to make use of this option,
if the conditions that lead to the unsuccessful ADF search
(namely detection of NO ADF but reporting of SOME ADF type)
is given.
Per default the new option is inactive by comment.
Activate at your own risk!
An upstream report was added to
https://alioth.debian.org/tracker/index.php?func=detail&aid=314108&group_id=30186&atid=410366
- created patch110 (avision.conf.patch) for avision.conf
- created patch111 (avision.c.patch) for avision.c
-------------------------------------------------------------------
Thu Apr 4 15:52:19 UTC 2013 - meissner@suse.com
- fixed /etc/slp.reg.d/ ownership conflict, just have
it as %dir and the files as %config.
(see OBS RQ 162582 decline message)
-------------------------------------------------------------------
Wed Mar 6 06:14:19 UTC 2013 - coolo@suse.com
- update license to new format
-------------------------------------------------------------------
Sat Jan 19 12:53:11 UTC 2013 - lnussel@suse.de
- require libv4l-devel to enable v4l backend
-------------------------------------------------------------------
Tue Dec 11 14:42:20 CET 2012 - jsmeix@suse.de
- Our own special source file epkowa.desc is dropped because
the package iscan-free is dropped (bnc#788756). Instead
adapt_epkowa.desc_for_yast2-scanner.patch adapts the upstream
epkowa.desc for yast2-scanner which works without additional
adaptions in yast2-scanner so that the sane-backends package
works on released openSUSE systems without a RPM requirement
for a yast2-scanner update (bnc#788756 starting at comment#14).
-------------------------------------------------------------------
Tue Oct 16 13:47:46 CEST 2012 - jsmeix@suse.de
- Upgraded to sane-backends version 1.0.23:
New backends:
kvs40xx (Panasonic KV-S40xx), kodakaio (Kodak AiO ESP and Hero).
Significant enhancements to several backends.
30 new scanner models supported.
V4L support improvements.
Improvements for builds on multiple platforms.
Improved udev rules.
Updated software deskew algorithm.
Documentation updates.
Bugfixes.
Note:
This is one more release of the SANE 1.0 series, compare
the below entry dated "Thu Feb 28 13:56:15 CET 2008".
- sane-backends-1.0.22-xerox_mfp-fix-usb-devices.patch that
fixes usb device support in xerox_mfp is obsolete since
sane-backends-1.0.23 because it is fixed in the source.
- fix-no-return-in-nonvoid-function.patch fixes a "control reaches
end of non-void function" gcc warning which lets build fail
with "no-return-in-nonvoid-function" error in kodakaio.c.
-------------------------------------------------------------------
Thu Aug 23 09:24:52 UTC 2012 - cfarrell@suse.com
- license update: GPL-2.0+ and SUSE-GPL-2.0+-with-sane-exception and
SUSE-Public-Domain
The LICENSE file in the sane-backends packages explains the licensing of
the package. Added SUSE-GPL-2.0+-with-sane-exception to the spreadsheet
linked from license.opensuse.org as that license is not yet upstream at
http://www.spdx.org/licenses (hence the SUSE- proprietary extension)
-------------------------------------------------------------------
Fri Apr 20 12:24:49 CEST 2012 - jsmeix@suse.de
- Configure --enable-libusb_1_0 plus BuildRequires libusb-1_0-devel
to use libusb1 (instead of using libusb0 via libusb-compat),
see https://bugzilla.novell.com/show_bug.cgi?id=559697#c7
for the libusb versioning numbering.
- Use traditional bash scriptlets for post/postun with
an explicite "exit 0" line at the end to be fail safe
and therefore also "PreReq: /sbin/ldconfig" explicitly,
see the "Shared_libraries" section in
http://en.opensuse.org/openSUSE:Packaging_scriptlet_snippets
- BuildIgnore ghostscript-x11 because BuildRequires texlive-latex
is needed for sane.tex -> sane.dvi -> sane.ps but texlive-latex
requires texlive which requires ghostscript-x11 but the latter
is not needed and blows up the build system.
- Minor cleanups in the spec file.
-------------------------------------------------------------------
Tue Mar 20 15:44:31 UTC 2012 - jslaby@suse.de
- added explicit "BuildRequires libusb-compat-devel" to
re-add support for USB scanners
-------------------------------------------------------------------
Sun Feb 5 20:18:31 UTC 2012 - lnussel@suse.de
- sane-backends-1.0.21-SCX4500W.patch adds usb id for SCX4500W
- sane-backends-1.0.22-xerox_mfp-fix-usb-devices.patch fixes
usb device handling regression in xerox_mfp (bnc#745245)
-------------------------------------------------------------------
Sun Nov 20 06:28:34 UTC 2011 - coolo@suse.com
- add libtool as buildrequire to avoid implicit dependency
-------------------------------------------------------------------
Thu Sep 29 16:57:26 CEST 2011 - jsmeix@suse.de
- Added an entry for "SCSI processor EPSON Perfection1640"
to libsane.rules (bnc#681146) see in particular
https://bugzilla.novell.com/show_bug.cgi?id=681146#c43
- Added a wildcard entry for any "SCSI processor EPSON SCANNER*"
to libsane.rules see the "55-libsane.rules"/"Device recognition"
mail thread in June 2011 on sane-devel@lists.alioth.debian.org
-------------------------------------------------------------------
Tue Mar 29 13:07:20 CEST 2011 - jsmeix@suse.de
- Fixed udev rules for SCSI scanners:
For SCSI scanners "ATTRS" is mandatory for every sysfs attribute
(in particular ATTRS{type}, ATTRS{vendor}, and ATTRS{model})
so that "ATTRS" is replaced by "ATTR" only for USB scanners
(see openSUSE/Novell Bugzilla bnc#681146).
-------------------------------------------------------------------
Fri Mar 25 10:27:36 CET 2011 - jsmeix@suse.de
- Fixed udev rules for SCSI scanners:
Because of openSUSE/Novell Bugzilla bnc#436085
(see the entry below dated "Tue Oct 21 13:12:42 CEST 2008")
"SYSFS" and "ATTRS" were replaced by "ATTR" everywhere in
libsane.rules but for SCSI scanners "ATTRS{type}" is mandatory
(see openSUSE/Novell Bugzilla bnc#681146).
-------------------------------------------------------------------
Sun Feb 20 10:43:15 UTC 2011 - coolo@novell.com
- fix dependencies of devel package
-------------------------------------------------------------------
Wed Feb 16 15:31:21 CET 2011 - jsmeix@suse.de
- Upgraded to sane-backends version 1.0.22:
New backends:
kvs20xx (Panasonic KV-S20xx), magicolor (Konica-Minolta).
Significant enhancements to several backends.
More than 80 new scanner models supported.
Support many more networked scanners.
Added -A option to scanimage.
Improved build system.
Improved USB support.
Improved udev rules.
Documentation updates.
Bugfixes.
Note:
This is one more release of the SANE 1.0 series, compare
the below entry dated "Thu Feb 28 13:56:15 CET 2008".
- sane-backends-1.0.21-i18n.patch,
fix-genesys-create_range-type.patch,
fix-xerox_mfp-color-mode.patch, and
canon-backend-autoprobing.patch are obsolete since
sane-backends-1.0.22 because it is fixed in the source.
- Adapted how we derive our libsane.rules file from the
generated one which uses now "ATTRS" (instead of "SYSFS"),
see the below entry dated "Tue Oct 21 13:12:42 CEST 2008".
- Updated models.dat to the one from the current HPLIP 3.11.1.
- Added only those new models from epkowa.desc in the
sane-backends 1.0.22 sources which 'requires DFSG non-free'
plugin software to our epkowa.desc source file so that the
supported models in our epkowa.desc source file still match
to what is supported by our iscan-free package but more users
of models which require the proprietary software from Avasys
will be informed via yast2-scanner.
-------------------------------------------------------------------
Thu Dec 9 11:48:58 CET 2010 - jsmeix@suse.de
- fix-xerox_mfp-color-mode.patch adds SANE_VALUE_SCAN_MODE_HALFTONE
in xerox_mfp.c to fix a regression in sane-backends-1.0.21
where the xerox_mfp works only in grayscale mode
(see openSUSE/Novell Bugzilla bnc#658017).
- Updated models.dat to the one from the current hplip-3.10.9.
-------------------------------------------------------------------
Wed Sep 22 14:08:26 CEST 2010 - jsmeix@suse.de
- Configure with --enable-pthread so that backends can use
POSIX threads to implement asynchronous I/O instead of
the default which uses a pipe and forks a reader process
(see openSUSE/Novell Bugzilla bnc#633780).
-------------------------------------------------------------------
Wed Sep 15 08:51:03 UTC 2010 - aj@suse.de
- BuildRequires libieee1284-devel.
- Split up devel package.
-------------------------------------------------------------------
Tue Jun 22 16:40:42 CEST 2010 - jsmeix@suse.de
- Updated models.dat to the one from our current HPLIP version
so that the generated hpaio.desc matches to our HPLIP version.
- Enhanced epkowa.desc only with models which require proprietary
software so that the supported models in epkowa.desc
still match to what is supported by our iscan-free package
but more users of models which require proprietary
software will be informed via yast2-scanner.
-------------------------------------------------------------------
Tue May 11 14:31:58 UTC 2010 - lnussel@suse.de
- remove disable-resmgr-support.patch.
It's not needed as configure won't find resmgr anyways
(see Novell/Suse Bugzilla bnc#605914).
-------------------------------------------------------------------
Fri May 7 11:43:41 CEST 2010 - jsmeix@suse.de
- Upgraded to sane-backends version 1.0.21:
New backends:
kodak (Kodak i18xx), kvs1025 (Panasonic KV-S10xx),
p5 (Primax PagePartner)
Many backends updated.
224 more scanner models supported.
More consistent option naming.
Scanimage no longer writes image to tty.
Modern translation infrastructure.
Improved saned network daemon.
Internal SCSI, USB, threading, TCP & UDP code updates.
Updated HAL and udev support.
New sanei_magic image processing library.
Documentation updates.
Bugfixes.
Note:
This is one more release of the SANE 1.0 series, compare
the below entry dated "Thu Feb 28 13:56:15 CET 2008".
- fix-hp3900_config.c.patch, sane-desc_closedir.patch,
fix-lexmark_low-memory-leak.patch, and
fix-hp3900_sane-string-option-sizes.diff are obsolete since
sane-backends-1.0.21 because it is fixed in the source.
- sane-backends-1.0.20-xerox_mfp.diff backported post 1.0.20
xerox_mfp changes and is therefore removed since
sane-backends-1.0.21 which contains those changes, compare
the below entry dated "Thu Oct 8 09:35:17 UTC 2009".
- Slightly adapted disable-resmgr-support.patch and
no-descriptions-external-hpoj.patch to apply to the
sane-backends-1.0.21 sources.
- fix-genesys-create_range-type.patch lets in genesys.c
the create_range function be of type 'SANE_Range *'
to fix 'assignment makes pointer from integer' bugs
wherever the create_range function is called.
-------------------------------------------------------------------
Wed Apr 28 11:27:50 CEST 2010 - jsmeix@suse.de
- HAL is deprecated and does no longer support to grant read/write
device access permissions for scanners to the currently logged
in "desktop" user. Therefore all HAL related stuff was removed
(see Novell/Suse Bugzilla bnc#593946).
- Removed /usr/lib[64]/libsane.la
(see Novell/Suse Bugzilla bnc#592143).
-------------------------------------------------------------------
Mon Feb 1 12:29:15 UTC 2010 - jengelh@medozas.de
- package baselibs.conf
-------------------------------------------------------------------
Fri Dec 18 00:04:42 UTC 2009 - seife@opensuse.org
- fix udev warnings 'NAME="%k" is superfluous'
-------------------------------------------------------------------
Tue Nov 3 19:09:44 UTC 2009 - coolo@novell.com
- updated patches to apply with fuzz=0
-------------------------------------------------------------------
Thu Oct 8 09:35:17 UTC 2009 - lnussel@suse.de
- backport xerox_mfp changes to support samsung printers
-------------------------------------------------------------------
Wed Sep 30 12:59:12 CEST 2009 - jsmeix@suse.de
- fix-lexmark_low-memory-leak.patch adds a missing call to free
in sanei_lexmark_low_find_start_line in backend/lexmark_low.c
(see Novell/Suse Bugzilla bnc#542341).
- fix-hp3900_sane-string-option-sizes.diff fixes option sizes
because otherwise the frontend (e.g. xsane) may crash
(see Novell/Suse Bugzilla bnc#535752).
-------------------------------------------------------------------
Fri Sep 18 12:53:45 CEST 2009 - jsmeix@suse.de
- Updated models.dat with the one in the HPLIP 3.9.8 sources and
adapted create_hpaio.desc_from_models.dat accordingly so that
it results a hpaio.desc scanner description file for SANE
which matches to the sacnner models which are supported
by our currently provided HPLIP version.
-------------------------------------------------------------------
Thu Sep 17 01:24:39 CEST 2009 - crrodriguez@suse.de
- use find_lang macro
- run ldconfig correctly
-------------------------------------------------------------------
Thu Aug 13 14:25:00 CEST 2009 - jsmeix@suse.de
- sane-desc_closedir.patch adds a missing call to closedir
to sane-desc.c (see Novell/Suse Bugzilla bnc#530313).
-------------------------------------------------------------------
Wed Jul 29 16:46:53 CEST 2009 - jsmeix@suse.de
- fix-hp3900_config.c.patch fixes a possible for loop overflow
in hp3900_config.c (see Novell/Suse Bugzilla bnc#517281).
- fix-mustek_pp_ccd300.c.patch fixes undefined operations
in mustek_pp_ccd300.c (see Novell/Suse Bugzilla bnc#498435).
-------------------------------------------------------------------
Fri Jun 12 10:29:45 CEST 2009 - jsmeix@suse.de
- re-add-SANE_CAP_ALWAYS_SETTABLE.patch re-adds
SANE_CAP_ALWAYS_SETTABLE to sane.h which was erroneously
removed in sane-backends-1.0.20 so that sane-frontends
and xsane can no longer build,
see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=527675
-------------------------------------------------------------------
Wed Jun 10 15:25:58 CEST 2009 - jsmeix@suse.de
- Upgraded to sane-backends version 1.0.20:
New backends:
canon_dr (Canon DR-series), coolscan3 (Nikon LS & Coolscan),
rts8891 (Umax & HP 44xx), xerox_mfp (Samsung/Xerox/Dell MFPs)
Many backends updated.
75 more scanner models supported.
New (automake compatible) build system.
Avahi support.
More network scanners supported.
Epson backend deprecated, use epson2.
Coolscan2 backend deprecated, use coolscan3.
Internal SCSI, USB, threading, TCP & UDP code updates.
Updated HAL and udev support.
Improved saned configuration.
Scanimage updates.
Updated translations.
Documentation updates.
Bugfixes.
Note:
This is one more release of the SANE 1.0 series, compare
the below entry dated "Thu Feb 28 13:56:15 CET 2008".
- Re-enabled "autoreconf -fi" in the build section (it was
disabled because it failed for sane-backends-1.0.19).
- fix-uninitialized-variables.patch and
fix-sanei_scsi_find_devices.patch are obsolete since
sane-backends-1.0.20 because it is fixed in the source.
- Adapted install-umax_pp-tool.patch for the new build system
(now tools/Makefile.am instead of tools/Makefile.in).
- no-descriptions-external-hpoj.patch removes
descriptions-external/hpoj.desc from doc/Makefile.am
because it is intentionally removed from the sources
in the prep section to avoid confusion with its successor
hpaio.desc (since openSUSE 10.3 the package hp-officeJet
which provided the hpoj driver is dropped).
-------------------------------------------------------------------
Fri Jan 23 10:40:21 CET 2009 - jsmeix@suse.de
- Do no longer add a generic entry for SCSI scanners
to the HAL fdi file 70-scanner.fdi because this
is now provided by the hal package itself
(see Novell/Suse Bugzilla bnc#462639 comment #29).
-------------------------------------------------------------------
Fri Jan 16 12:26:55 CET 2009 - jsmeix@suse.de
- Avoid to suppress falsely found as "unsupported" models
in 55-libsane.rules and in 70-scanner.fdi
(see Novell/Suse Bugzilla bnc#439193 starting at comment #6).
- Avoid to get changed sources packaged into our source RPM
(see Novell/Suse Bugzilla bnc#463464 comment #11).
-------------------------------------------------------------------
Tue Jan 13 12:34:56 CET 2009 - olh@suse.de
- obsolete old -XXbit packages (bnc#437293)
-------------------------------------------------------------------
Wed Dec 3 17:11:53 CET 2008 - lnussel@suse.de
- use "usb" instead of "usb_device" (bnc#438867)
-------------------------------------------------------------------
Wed Dec 3 11:10:31 CET 2008 - jsmeix@suse.de
- Moved /etc/hal/fdi/policy/10osvendor/70-scanner.fdi
to /usr/share/hal/fdi/information/20thirdparty/70-scanner.fdi
(see Novell/Suse Bugzilla bnc#438867).
-------------------------------------------------------------------
Tue Nov 18 14:51:34 CET 2008 - jsmeix@suse.de
- In /etc/hal/fdi/policy/10osvendor/70-scanner.fdi
disable entries for USB scanners which are "unsupported"
(see Novell/Suse Bugzilla bnc#444158).
-------------------------------------------------------------------
Wed Oct 29 11:34:31 CET 2008 - jsmeix@suse.de
- Having only models in /etc/udev/rules.d/55-libsane.rules which
are in /etc/udev/rules.d/56-sane-backends-autoconfig.rules
is too restrictive because libsane.rules disables
USB autosuspend in the kernel which is needed as safe default
for any scanner regardless of its support status.
The only valid exception are unsupported models.
Therefore the scanner database is now created directly
in the spec file with the file name "scanner.database"
so that the scanner database can also be used to determine
the "unsupported" models to be disabled in libsane.rules
(see Novell/Suse Bugzilla bnc#439193).
-------------------------------------------------------------------
Tue Oct 28 12:35:52 CET 2008 - jsmeix@suse.de
- install-umax_pp-tool.patch installs tools/umax_pp as
/usr/bin/umax_pp which is built but not installed
but it is needed to recover from a failed scan
with scanners which use the umax_pp backend
(see the Debian report http://bugs.debian.org/496833).
-------------------------------------------------------------------
Tue Oct 28 10:51:00 CET 2008 - jsmeix@suse.de
- Avoid false positives (e.g. unsupported) and problematic
models in /etc/udev/rules.d/55-libsane.rules by having
all model entries disabled where the support status is
not "complete" or "good", i.e. when it is not listed
in /etc/udev/rules.d/56-sane-backends-autoconfig.rules
(see Novell/Suse Bugzilla bnc#439193).
-------------------------------------------------------------------
Tue Oct 21 13:12:42 CEST 2008 - jsmeix@suse.de
- Changed /etc/udev/rules.d/55-libsane.rules to jump to the end
if SUBSYSTEM!="usb" and replaced SYSFS by ATTR and did
the same chages in create_sane-backends-autoconfig.rules
(see Novell/Suse Bugzilla bnc#436085).
-------------------------------------------------------------------
Thu May 15 15:51:11 CEST 2008 - jsmeix@suse.de
- Changed create_sane-backends-autoconfig.rules
to output '$$' insead of '$' because in udev rules files
'$$' represents the '$' character itself, see "man udev"
(see Novell/Suse Bugzilla bnc#390783).
-------------------------------------------------------------------
Thu Apr 17 12:24:22 CEST 2008 - jsmeix@suse.de
- Use info.subsystem instead of the deprecated info.bus
for the HAL 70-scanner.fdi file.
- Changed create_sane-backends-autoconfig.rules to ignore
the INTERFACE field because it could be empty or arbitrary
stuff like "Parport USB" or "SCSI USB IEEE-1394".
-------------------------------------------------------------------
Fri Apr 11 14:40:50 CEST 2008 - jsmeix@suse.de
- Updated epkowa.desc from the current Iscan version 2.10.0.1.
- Replaced hpaio.desc which is currently messed up in HPLIP
by create_hpaio.desc_from_models.dat which creates hpaio.desc
directly from the models.dat file from HPLIP version 2.8.4.
-------------------------------------------------------------------
Thu Apr 10 12:54:45 CEST 2008 - ro@suse.de
- added baselibs.conf file to build xxbit packages
for multilib support
-------------------------------------------------------------------
Tue Apr 8 15:49:51 CEST 2008 - jsmeix@suse.de
- fix-sanei_scsi_find_devices.patch lets sanei_scsi_find_devices
continue on to look at subsequent devices if the attach callback
returns anything other than SANE_STATUS_GOOD
(see Novell/Suse Bugzilla bnc#350688).
-------------------------------------------------------------------
Tue Mar 18 15:58:45 CET 2008 - jsmeix@suse.de
- Added "Supplements: sane-backends" to sane-backends-autoconfig
sub-package.
-------------------------------------------------------------------
Thu Mar 13 14:00:15 CET 2008 - jsmeix@suse.de
- Added "scanner autoconfiguration" support via
create_scanner_database, create_sane-backends-autoconfig.rules
which create /etc/udev/rules.d/56-sane-backends-autoconfig.rules
and provide it in the new sane-backends-autoconfig sub-package
(see Novell/Suse Bugzilla bnc#347943).
-------------------------------------------------------------------
Tue Mar 11 15:30:25 CET 2008 - jsmeix@suse.de
- Replaced "scanner" by "SCSIviaUSBscanner" in info.capabilities
in 70-scanner.fdi to explicitely mark those special USB scanners
which do not use libusb but an unusual SCSI protocol which is a
derivative of usb storage (see Novell/Suse Bugzilla bnc#341565).
-------------------------------------------------------------------
Thu Feb 28 13:56:15 CET 2008 - jsmeix@suse.de
- Updated to sane-backends version 1.0.19:
New backends:
cardscan (Corex Cardscan 800c), epjitsu (Epson-based Fujitsu),
epson2 (various Epson scanners), hp3900 (HP ScanJet 3970 and
more), hp5590 (HP ScanJet 5590 and more), hpljm1005 (HP LaserJet
M1005 and more), hs2p (Ricoh IS400 series)
Updated backends:
abaton, agfafocus, apple, artec, artec_eplus48u, as6e, avision,
canon, coolscan, coolscan2, dc25, dell1600n_net, dll, epson,
fujitsu, genesys, gt68xx, hp3500, ibm, lexmark, microtek,
microtek2, mustek, nec, net, pie, pint, pixma, plustek,
plustek_pp, ricoh, s9036, sm3600, sm3840, snapscan, sp15c,
st400, tamarack, teco2, test, u12, umax, umax1220u, umax_pp
Plus:
Scanimage detects more chipsets.
Internal scsi, usb, tcp and udp code updates.
Basic HAL .fdi creation support
Build system updates.
Updated translations.
Documentation updates.
Bugfixes.
Note:
This will be (hopefully) the last release of the SANE 1.0 series.
The next release will be extended (in a backwards compatible
fashion) to support more features of modern scanners.
- sane-backends-1.0.16-nb.patch (did locale rename: no -> nb)
is obsolete since version 1.0.19 because it uses already 'nb'.
- in fix-buffer-overflow.patch the overflows in backend/epson.c
backend/as6e.c and sanei/sanei_ab306.c are obsolete because
they are fixed in the source (only backend/niash.c is left).
- replace-HZ-by-sysconf_SC_CLK_TCK.patch is obsolete because
it is fixed in the source.
- fujitsu-disable-hw_ink_remain.patch is obsolete because
it is fixed in the source.
- in fix-uninitialized-variables.patch the fix regarding
teco2.c is obsolete because it is fixed in the source
but a new fix regarding avision.c was added.
- fix-ambiguous-post-pre-increment.patch is obsolete because
it is fixed in the source.
- module-build.diff is dropped because there is no reason to build
driver modules as libtool modules and furthermore it makes our
package incompatible with the rest of the SANE world.
- Since version 1.0.19 there is udev and HAL support.
Therefore the old/outdated hotplug stuff (libsane.usermap
and libusbscanner) is dropped (it was never used by openSUSE).
Also the evil-hack init-script "sane-dev" is no longer provided.
libsane.rules.CVS-2007-07-29.using-lp is obsolete because
the udev rules file 55-libsane.rules is directly derived
from tools/udev/libsane.rules.
create_hal_global_fdi_from_libsane.rules is obsolete because
the HAL fdi file 70-scanner.fdi is directly derived
from tools/hal/libsane.fdi.
-------------------------------------------------------------------
Thu Jan 31 10:45:45 CET 2008 - adrian@suse.de
- Call create_hal_global_fdi_from_libsane.rules via bash.
We can not rely on source file permissions
-------------------------------------------------------------------
Tue Aug 14 16:07:08 CEST 2007 - jsmeix@suse.de
- Replaced create_hal_global_fdi_for_scanners by
create_hal_global_fdi_from_libsane.rules which creates the
global HAL 70-scanner.fdi file during build-time from the
libsane.rules file (see Novell/Suse Bugzilla bnc#298878).
-------------------------------------------------------------------
Fri Aug 10 14:48:13 CEST 2007 - jsmeix@suse.de
- Removed hpoj.desc completely to avoid confusion with its
successor hpaio.desc because since openSUSE 10.3 the package
hp-officeJet (for hpoj.desc) is dropped.
- Updated hpaio.desc from the current HPLIP version 2.7.7.
- Updated epkowa.desc from the current Iscan version 2.8.0.1.
-------------------------------------------------------------------
Fri Aug 3 13:29:39 CEST 2007 - jsmeix@suse.de
- Added libsane.rules.CVS-2007-07-29.using-lp which are udev rules
that are needed for the openSUSE 10.3 kernel. The rules are
derived from what sane-desc in sane-backends 1.0.18-cvs creates.
-------------------------------------------------------------------
Wed Jun 13 11:50:30 CEST 2007 - jsmeix@suse.de
- Adapted create_hal_global_fdi_for_scanners according to the
currently newest changes in HAL (see Suse Bugzilla bnc#250659).
-------------------------------------------------------------------
Wed Jun 6 15:25:26 CEST 2007 - dmueller@suse.de
- module-build.diff builds driver modules as libtool modules.
-------------------------------------------------------------------
Sat Apr 21 15:15:08 CEST 2007 - aj@suse.de
- Use texlive.
-------------------------------------------------------------------
Wed Feb 21 15:40:03 CET 2007 - jsmeix@suse.de
- Added a fix for an "array subscript is above array bounds"
error in niash.c to fix-buffer-overflow.patch
(see Suse Bugzilla bnc#246654).
-------------------------------------------------------------------
Wed Jan 31 14:41:10 CET 2007 - jsmeix@suse.de
- Added a fix for an "array subscript is above array bounds"
error in sanei_ab306.c to fix-buffer-overflow.patch
(see Suse Bugzilla bnc#239953).
-------------------------------------------------------------------
Mon Jan 29 14:29:35 CET 2007 - jsmeix@suse.de
- Renamed the package from 'sane' (which is only used by Suse)
to 'sane-backends' which is used by the rest of the world
and let this package provide and obsolete 'sane'.
- Updated replace-HZ-by-sysconf_SC_CLK_TCK.patch to what
there will be done upstream.
-------------------------------------------------------------------
Fri Dec 8 13:54:43 CET 2006 - jsmeix@suse.de
- fix-ambiguous-post-pre-increment.patch fixes an ambiguous
post-increment in canon-sane.c for big-endian architectures
(e.g. PowerPC).
-------------------------------------------------------------------
Fri Oct 27 11:50:40 CEST 2006 - jsmeix@suse.de
- Updated hpaio.desc from the current HPLIP version 1.6.10
- Updated epkowa.desc from the current Iscan version 2.3.0.1.
- Added fixes of possible strncat buffer overflows and
strncpy unterminated string errors in as6e.c
to fix-buffer-overflow.patch.
- Replaced the complicated postinstall script by calling
create_hal_global_fdi_for_scanners which should obsolete
sane-dev (see Suse Bugzilla bnc#160899).
- Moved sane-dev from {_initrddir} to {_datadir}/sane/ to have it
still available in case of backward compatibility problems.
-------------------------------------------------------------------
Sun Oct 22 12:25:08 CEST 2006 - meissner@suse.de
- buildrequires libgphoto2-devel.
-------------------------------------------------------------------
Mon Sep 18 14:47:07 CEST 2006 - jsmeix@suse.de
- fix-uninitialized-variables.patch fixes an uninitialized
variable in teco2.c (see Suse Bugzilla bnc#205451).
- create_hal_global_fdi_for_scanners can be called by HAL or YaST
to create a global HAL fdi file for scanners which are known
by the current SANE version (see Suse Bugzilla bnc#160899).
-------------------------------------------------------------------
Mon Sep 11 10:53:35 CEST 2006 - jsmeix@suse.de
- disable-resmgr-support.patch disables the resmgr support in SANE
which is no longer needed in SANE because resmgr works now
outside of SANE via ACLs for the scanner device nodes.
-------------------------------------------------------------------
Mon Sep 4 11:23:09 CEST 2006 - jsmeix@suse.de
- Replaced the fix from Thu Aug 31 in fujitsu.c by a new fix
fujitsu-disable-hw_ink_remain.patch which disables hw_ink_remain
which causes a buffer overflow (see Suse Bugzilla bnc#202243).
-------------------------------------------------------------------
Thu Aug 31 15:09:06 CEST 2006 - jsmeix@suse.de
- Added a fix of a too small char array in fujitsu.c to
fix-buffer-overflow.patch (see Suse Bugzilla bnc#202243).
-------------------------------------------------------------------
Fri Jul 21 10:20:00 CEST 2006 - jsmeix@suse.de
- canon-backend-autoprobing.patch lets the "canon" backend
do scanner auto-recognition (see Suse Bugzilla bnc#177492).
-------------------------------------------------------------------
Tue Jul 4 14:47:26 CEST 2006 - jsmeix@suse.de
- Updated to sane-backends version 1.0.18:
New backends: dell1600n_net, hp3500, pixma, stv680.
Updated backends: avision, canon, dll, epson, fujitsu, genesys,
gt68xx, microtek2, mustek_pp, niash, plustek, snapscan, sp15c,
test, u12, umax1220u.
Several bug fixes.
- fix-buffer-overflow.patch fixes a too small char array
which causes a buffer overflow if SANE_DEBUG_EPSON is set.
- replace-HZ-by-sysconf_SC_CLK_TCK.patch replaces the fixed HZ
compile-time value (no longer supported by new glibc)
by the more correct sysconf(_SC_CLK_TCK) runtime value.
- Updated hpaio.desc from the current HPLIP version 1.6.6a.
- Updated epkowa.desc from the current Iscan version 2.1.0.1.
-------------------------------------------------------------------
Wed Mar 22 14:29:05 CET 2006 - jsmeix@suse.de
- Added "haldaemon" to Should-Start in /etc/init.d/sane-dev and
keeping old name "hal" for the same boot facility to be safe.
-------------------------------------------------------------------
Wed Mar 15 11:03:52 CET 2006 - jsmeix@suse.de
- Fixed percent-characters for RPM in post-install script
(use '%%%%' in spec file to get actually '%%' in the script).
-------------------------------------------------------------------
Mon Mar 13 11:52:47 CET 2006 - jsmeix@suse.de
- Added automagic but safe pos-install script which tries
to update resmgr permissions for scanners for an update
from Suse Linux 10.0 to 10.1 (see Suse Bugzilla bnc#157055).
-------------------------------------------------------------------
Fri Jan 27 13:22:30 CET 2006 - jsmeix@suse.de
- Current epkowa.desc from the current iscan package.
- Current hpaio.desc made from the current hplip package.
- Changed hpoj.desc to match better to hpaio.desc.
Added "hpoj is outdated" comments to hpoj.desc.
-------------------------------------------------------------------
Wed Jan 25 21:41:19 CET 2006 - mls@suse.de
- converted neededforbuild to BuildRequires
-------------------------------------------------------------------
Tue Jan 3 12:56:28 CET 2006 - jsmeix@suse.de
- Updated to sane-backends version 1.0.17.
-------------------------------------------------------------------
Mon Sep 26 14:12:11 CEST 2005 - jsmeix@suse.de
- Disabled locking because /var/lock/sane/ would be world writable.
-------------------------------------------------------------------
Tue Sep 20 12:02:46 CEST 2005 - jsmeix@suse.de
- Updated to sane-backends version 1.0.16.
-------------------------------------------------------------------
Mon Aug 22 14:43:14 CEST 2005 - jsmeix@suse.de
- Updated the hpaio.desc file according to our current HPLIP
software version 0.9.4.
-------------------------------------------------------------------
Tue Aug 9 12:25:44 CEST 2005 - jsmeix@suse.de
- Updated the epkowa.desc in this package with the newest version
from the iscan package to build the SANE documentation files
accordingly (see the entry dated Thu Feb 17 16:52:24 CET 2005).
-------------------------------------------------------------------
Mon Aug 1 12:14:59 CEST 2005 - jsmeix@suse.de
- Added the USB usermap file to the sane package to have the
USB manufacturer and model IDs available for scanner detection.
-------------------------------------------------------------------
Wed May 25 12:05:30 CEST 2005 - jsmeix@suse.de
- Added "Should-Start: hal" to sane-dev.
- The "SnapScan 1236u" needs no firmware upload (SUSE bug 73960).
-------------------------------------------------------------------
Tue May 17 15:09:07 CEST 2005 - jsmeix@suse.de
- Fix "... is used uninitialized ..." warnings.
-------------------------------------------------------------------
Fri Mar 11 11:39:50 CET 2005 - jsmeix@suse.de
- Removed the obsolete SLP stuff from sane-dev
because sane-dev has nothing to do with
saned and its SLP registration (SUSE bug 72156).
- Using only SANE device entries in sane-dev which start
with '^/dev/' to find possible SCSI devices because e.g.
HPLIP creates SANE devices like 'hpaio:.../dev/...'.
- Replaced the test with 'ps' for a running scanimage
with a simpler test using '/proc/$scanimagePID/cmdline'.
-------------------------------------------------------------------
Thu Feb 24 09:33:15 CET 2005 - jsmeix@suse.de
- Increased the maximum wait time in sane-dev to 30 seconds
because some scanners fall asleep and need a longer time
to wake up and respond to 'scanimage -f ...'.
-------------------------------------------------------------------
Thu Feb 17 16:52:24 CET 2005 - jsmeix@suse.de
- Updated the SUSE versions of the descriptions-external files.
- Now the SUSE versions of the descriptions-external files
are used for build so that the SANE documentation files
_defaultdocdir/sane/sane-backends/*.html
are built accordingly.
- Added 'Provides: sane-backends' because the rest of the world has
package names 'sane-backends' and 'sane-frontends' according to
the two SANE software projecs. Therefore third party RPMs which
require SANE libraries usually have 'Requires: sane-backends'.
-------------------------------------------------------------------
Thu Feb 10 02:40:55 CET 2005 - ro@suse.de
- added libpng to neededforbuild (for tetex)
-------------------------------------------------------------------
Tue Feb 8 14:31:29 CET 2005 - jsmeix@suse.de
- Replaced the descriptions-external file epkowa.desc from SANE
by an extended SUSE version which has more model listed
according to "man sane-epkowa" in the SUSE iscan package.
- Removed the automated "insserv" for sane-dev because this
is now done by the YaST scanner config only if a SCSI scanner
was set up (i.e. for USB scanners sane-dev is useless and
therefore it should not run by default).
-------------------------------------------------------------------
Wed Feb 2 15:21:11 CET 2005 - jsmeix@suse.de
- Added a descriptions-external file hpaio.desc which was
manually derived from the models.xml in the hplip package.
Therefore there is a package version problem to have a fixed
source file hpaio.desc but in the future an automated script
may create an up to date hpaio.desc file.
-------------------------------------------------------------------
Tue Dec 28 11:24:53 CET 2004 - jsmeix@suse.de
- Changed how the descriptions and descriptions-external files
are installed (those files are needed by YaST to create its
scanner database): No longer via a doc/Makefile.in patch
but directly in the spec file to avoid changes in the sources
for SUSE-specific stuff.
- Added ':firmware "required"' entries for the respective scanners
to the descriptions files (for gt68xx, artec_eplus48u, snapscan)
so that YaST knows which scanners require a firmware upload.
- Replaced the descriptions-external file hpoj.desc from SANE
by an extended SUSE version which has a list of explicite model
names added so that YaST can show a detailed model list.
-------------------------------------------------------------------
Wed Nov 17 16:57:23 CET 2004 - jsmeix@suse.de
- Changed runlevel script "sane-dev":
Avoid too long (perhaps infinite) waiting for "scanimage".
Maximum wait is 10 seconds.
Improved the format of the output.
-------------------------------------------------------------------
Wed Nov 10 16:19:48 CET 2004 - jsmeix@suse.de
- Changed "sane" runlevel script which sets permissions in /dev/
and renamed it to "sane-dev" to avoid confusion with the
SANE network daemon "saned" and its service name "sane-port"
respectively "sane" (see SUSE bugzilla bnc#41233).
-------------------------------------------------------------------
Mon Nov 8 15:57:37 CET 2004 - jsmeix@suse.de
- new sane-backends version 1.0.15
- sane-frontends stuff is moved to the new package sane-frontends
-------------------------------------------------------------------
Wed Oct 20 01:57:33 CEST 2004 - ro@suse.de
- locale rename: no -> nb
-------------------------------------------------------------------
Mon Sep 20 17:47:53 CEST 2004 - jsmeix@suse.de
- Added a test in /etc/init.d/sane whether slpd is really
running before "/etc/init.d/slpd reload" is done.
(SUSE bugzilla bnc#42032).
-------------------------------------------------------------------
Wed Sep 15 13:50:05 CEST 2004 - jsmeix@suse.de
- Added sane-backends-1.0.14-epson_d8.patch which fixes the
problem with EPSON D8 function level scanners that have
a transparency unit (SUSE bugzilla bnc#45075).
- Changed the file name of /etc/xinetd.d/sane.xinetd to
/etc/xinetd.d/sane-port because xinetd ignores files
with names containing a dot (SUSE bugzilla bnc#45313).
-------------------------------------------------------------------
Fri Aug 13 14:46:04 CEST 2004 - jsmeix@suse.de
- Changed "sane" to "sane-port" in sane.xinetd see bug 41233
-------------------------------------------------------------------
Thu Jul 15 14:13:20 CEST 2004 - jsmeix@suse.de
- Added libieee1284 support (by using the new libieee1284 package)
-------------------------------------------------------------------
Tue Jul 13 15:34:55 CEST 2004 - jsmeix@suse.de
- Update sane-backends to version 1.0.14
-------------------------------------------------------------------
Wed Apr 21 12:52:35 CEST 2004 - pth@suse.de
- Remove libtool macros from acinclude.m4 that caused build
failures.
- Fix the cases of unnecessary type-punning, obsoleting the need
for -fno-strict-aliasing.
- Fix pointer->int casts.
-------------------------------------------------------------------
Thu Apr 1 13:55:32 CEST 2004 - jsmeix@suse.de
- Correction of what was done according to previous entry:
Disable all entries in almost all descriptions-external/*.desc
files because none of the external backends is included in the
sane package
except one: /usr/share/sane/descriptions-external/hpoj.desc
because the hpoj backend is in fact available because it is
in the hp-officeJet package which is installed by default
see bug 37885
-------------------------------------------------------------------
Mon Mar 29 14:27:04 CEST 2004 - jsmeix@suse.de
- Removed sane-descriptions-external-epkowa.desc.dif and
disabled all entries in all descriptions-external/*.desc files
because none of the external backends is included in the sane
package (see bugzilla bnc#37169) and for details see
.../doc/packages/sane/sane-backends/sane-backends-external.html
-------------------------------------------------------------------
Thu Mar 25 15:44:37 CET 2004 - jsmeix@suse.de
- Patch sane-descriptions-external-epkowa.desc.dif
disables those entries in descriptions-external/epkowa.desc
which are also in descriptions/epson.desc
because we want to prefer the open source backend "epson"
(see bugzilla bnc#36584).
-------------------------------------------------------------------
Tue Mar 23 08:00:24 CET 2004 - meissner@suse.de
- gimp plugins are now in ../2.0/...
-------------------------------------------------------------------
Mon Mar 22 11:16:04 CET 2004 - meissner@suse.de
- epson.conf triggers autodetect on mentioning of "usb", so just
add this instead of all ids. #36585
-------------------------------------------------------------------
Fri Mar 12 10:55:40 CET 2004 - meissner@suse.de
- The plustek driver has its very own idea of a config file format,
adapt the config patch.
-------------------------------------------------------------------
Mon Mar 8 15:04:54 CET 2004 - meissner@suse.de
- Updated the .conf files with most of the USB ids in use,
so scanimage -L finds the scanners even without kernel module.
-------------------------------------------------------------------
Wed Feb 25 11:48:20 CET 2004 - meissner@suse.de
- Merged all system scanner ids into the hardcoded usermap,
since newer kernels might no longer have the scanner module.
-------------------------------------------------------------------
Sat Feb 21 13:04:46 CET 2004 - ro@suse.de
- use no-strict-aliasing
-------------------------------------------------------------------
Sat Feb 21 12:46:16 CET 2004 - ro@suse.de
- fix gimp plugin link
-------------------------------------------------------------------
Sat Feb 21 11:46:39 CET 2004 - ro@suse.de
- updated frontends to 1.0.11-cvs to get gimp2 support
- use gtk2 for gimp
-------------------------------------------------------------------
Wed Feb 18 13:57:59 CET 2004 - meissner@suse.de
- actually apply the patch (and update it) and not just
readd it to the sources.
-------------------------------------------------------------------
Mon Feb 16 17:59:51 CET 2004 - meissner@suse.de
- reapply resmgr patch.
-------------------------------------------------------------------
Fri Feb 6 15:46:45 CET 2004 - jsmeix@suse.de
- new versions sane-backends-1.0.13 and sane-frontends-1.0.11
- use the more important backend version number as package version
-------------------------------------------------------------------
Sat Jan 17 12:52:06 CET 2004 - meissner@suse.de
- fixed small typemismatch in sm3600.c
-------------------------------------------------------------------
Wed Nov 19 16:46:47 CET 2003 - adrian@suse.de
- use $HOSTNAME instead of $LOCALHOST in slp reg file
-------------------------------------------------------------------
Fri Nov 14 10:55:04 CET 2003 - adrian@suse.de
- use correct keyword "X-UnitedLinux-Should-Start" in runlevel script
-------------------------------------------------------------------
Thu Nov 13 22:51:33 CET 2003 - adrian@suse.de
- add xinetd file for sane daemon
- let slpd check for running saned via (x)inetd
- notify slpd, if using saned init script
-------------------------------------------------------------------
Wed Nov 12 15:42:36 CET 2003 - freitag@suse.de
- added registration file for slp daemon
-------------------------------------------------------------------
Mon Nov 10 01:41:16 CET 2003 - ro@suse.de
- use net-snmp instead of ucdsnmp
-------------------------------------------------------------------
Fri Oct 10 13:00:01 CEST 2003 - hvogel@suse.de
- fix scanimage path in the init script
-------------------------------------------------------------------
Mon Jun 16 12:17:27 CEST 2003 - meissner@suse.de
- Also use -L/..._lib, so we find -lresmgr on x86_64.
-------------------------------------------------------------------
Fri Jun 13 10:18:34 CEST 2003 - meissner@suse.de
- Buildrooted.
- Added missing directories and files.
-------------------------------------------------------------------
Fri Jun 6 14:16:23 CEST 2003 - freitag@suse.de
- update to backend version 1.0.12 - better support of current
devices.
-------------------------------------------------------------------
Mon Mar 3 17:12:04 CET 2003 - freitag@suse.de
- fixed a filelist error which turned out to be a wrong lib link.
Bug #24567
-------------------------------------------------------------------
Wed Feb 26 16:04:58 CET 2003 - meissner@suse.de
- Added one missing resmgr invocation.
-------------------------------------------------------------------
Mon Feb 17 16:19:09 CET 2003 - meissner@suse.de
- Added resmgr support for both SCSI and USB kernel mode.
(basically use rsm_open_device). This will allow opening
the /dev/*scanner devices as user without need for special
permissions.
- Added a USB hotplug usermap which makes the sm3600 devices
accessible for libusb. (The rest are handled by the yast2 scanner
module).
-------------------------------------------------------------------
Mon Feb 17 13:39:41 CET 2003 - freitag@suse.de
- added epson backend directly from the author Karl Hein Kremer due
to further changes to the USB base code. Removed the patch applied
before again.
-------------------------------------------------------------------
Mon Feb 17 10:09:29 CET 2003 - freitag@suse.de
- patch applied to detect Epson scanners via libusb correctly.
Thanks to Karl Heinz Kremer who sent it in.
-------------------------------------------------------------------
Mon Feb 10 11:26:14 CET 2003 - freitag@suse.de
- updated to backends version 1.0.11 which was suggested to avoid
a possible security whole.
-------------------------------------------------------------------
Mon Feb 3 11:20:17 CET 2003 - freitag@suse.de
- update to stable version 1.0.10
added gimp and gimp-devel to neededforbuild again to provide gimp
support for xscanimage
-------------------------------------------------------------------
Fri Jan 31 18:11:12 CET 2003 - meissner@suse.de
- neededforbuild +resmgr, so libusb gets detected.
-------------------------------------------------------------------
Fri Jan 31 14:30:16 CET 2003 - freitag@suse.de
- added backend descriptions file to /usr/share/sane
moved the style file from /usr/X11R6/lib to /usr/share/sane
added sane postscript and dvi documentation as extra source
-------------------------------------------------------------------
Mon Jan 27 10:40:00 CET 2003 - freitag@suse.de
- update to version 1.0.10 pre 3
-------------------------------------------------------------------
Fri Jan 24 11:29:58 CET 2003 - freitag@suse.de
- update to pre version 1.0.10, final will follow soon.
Much more scanner supported.
-------------------------------------------------------------------
Thu Oct 31 11:56:53 CET 2002 - freitag@suse.de
- update to final version 1.0.9
-------------------------------------------------------------------
Tue Oct 29 13:32:56 CET 2002 - ro@suse.de
- removed (old) libtool macros from acinclude.m4
-------------------------------------------------------------------
Fri Oct 18 12:46:26 CEST 2002 - freitag@suse.de
- updated to pre version of 1.0.9 in advance for 1.0.9 and did some
cleanup of the spec like removing a lot of neededforbuild deps
and applied proper CFLAGS
Added the gt68xx backend that supports expecially rf's new Mustek
usb scanner
-------------------------------------------------------------------
Mon Sep 9 15:16:07 CEST 2002 - freitag@suse.de
- fixed filelist and added libsane.so again.
-------------------------------------------------------------------
Mon Sep 9 11:55:45 CEST 2002 - freitag@suse.de
- removed wrong lib libsane-hpoj from packlist, they came from package
hp-officeJet accidentially.
-------------------------------------------------------------------
Fri Aug 16 09:54:02 CEST 2002 - freitag@suse.de
- added prerequires (Bug #17983) and a postun procedure
-------------------------------------------------------------------
Mon Jul 29 16:18:13 CEST 2002 - meissner@suse.de
- gphoto -> libgphoto2
-------------------------------------------------------------------
Sat Jul 27 15:04:46 CEST 2002 - adrian@suse.de
- fix neededforbuild
-------------------------------------------------------------------
Thu Jul 18 15:38:44 CEST 2002 - freitag@suse.de
- reapplied __KERNEL__-Patches
-------------------------------------------------------------------
Wed Jul 17 16:49:12 CEST 2002 - freitag@suse.de
- update to sane version 1.0.8:
-Network backend and saned update
-documentation updates
-bugfixes
-updated backends
-new backends
-------------------------------------------------------------------
Tue Mar 19 13:12:23 CET 2002 - freitag@suse.de
- fixed bug #14916
This bug was caused by an segfault of scanimage which is used to
find out which scanner are in operation on the network scan server.
Since scanimage uses a one byte to small buffer in a string copy
operation, a segfault happens.
Fixed that bug by enlarging the buffer.
-------------------------------------------------------------------
Fri Mar 8 14:06:32 CET 2002 - freitag@suse.de
- fixed bug #14449
That changes the sane startup script to work with the scanimage
from sane package 1.0.7.
Added a proper check for being root or not. only root may start
or restart the service (which actually does nothing but setting
file permissions for scsi scanner). See rcsane.diff for the patch
applied on rc.sane. Note that rcsane.diff is not applied during
the build process, but shows the differences against the former
version of rc.sane
-------------------------------------------------------------------
Mon Feb 18 17:11:15 CET 2002 - freitag@suse.de
- fixed bug 13430 - updated to version 1.0.7 of sane. This broadens
the scanner support.
-------------------------------------------------------------------
Wed Feb 6 12:22:25 CET 2002 - freitag@suse.de
- minor fixes in rc.sane: removed useless test on start variable
-------------------------------------------------------------------
Thu Jan 10 15:09:23 CET 2002 - freitag@suse.de
- updated to V. 1.0.6, provides bugfixes, gphoto2 changes and some
new backends
- removed rc.config-template and used rpm macro instead to set the
rc.config var.
- removed mustek_usb external source, because it is now part of the
standard sane package.
-------------------------------------------------------------------
Tue Jan 8 20:34:39 CET 2002 - egmont@suselinux.hu
- changed `adjustscannerperm' to `sane' in init script
- removed bogus `probe' entry from the same script
-------------------------------------------------------------------
Wed Nov 21 01:44:23 CET 2001 - bjacke@suse.de
- remove useless provides
- make config files (noreplce)
- use libdir macro
-------------------------------------------------------------------
Wed Sep 12 17:16:16 CEST 2001 - freitag@suse.de
- added support for Agfa SnapScan 1236U and updated to a later verion
of mustek_usb-Backend, which provides better integration to the
main backend module.
Disabled all dll-entries in /etc/sane.d/dll.conf to avoid probs
with wrong device detection which happend in the past. The yast
module enables the correct one, added a README.SuSE to the sane
package doc path that describes this change.
-------------------------------------------------------------------
Tue Sep 4 17:16:16 CEST 2001 - freitag@suse.de
- added a rc-script that changes the permissions of scsi scanner
devices if they are installed. The scsi device files are switched
to permission 666 on startup and reverted back to 640 on shutdown.
-------------------------------------------------------------------
Mon Sep 3 11:21:39 CEST 2001 - freitag@suse.de
- added a backend for mustek usb scanners.
-------------------------------------------------------------------
Wed Aug 29 17:32:55 CEST 2001 - freitag@suse.de
- added support for scanning from HP all-in-one-devices.
Therefore, package hp-officeJet is needed.
- added a configure option --docdir to get rid of build failiures
on distributions which have the documentation not in share.
-------------------------------------------------------------------
Mon Aug 27 12:05:51 CEST 2001 - freitag@suse.de
- applied patches for scanimage and sane-find-scanner that produce
better parseable output for scripts etc. to help yast2 module.
- added a not yet in SANE released driver for mustek usb scanners,
which are quite common in germany. The driver was initially written
by a mustek engineer and was overtaken by the mustek backend
maintainer of SANE.
-------------------------------------------------------------------
Tue Jul 17 14:40:49 CEST 2001 - uli@suse.de
- disabled direct PIO access for PPC
-------------------------------------------------------------------
Thu Jul 5 16:41:30 CEST 2001 - freitag@suse.de
- update to release 1.0.5
- documentation again created dynamically.
-------------------------------------------------------------------
Thu Jun 28 18:43:33 CEST 2001 - freitag@suse.de
- updated to pre-1.0.5 version, 1.0.5 is expected soon
- patched sane-find-scanner to have a silent mode.
-------------------------------------------------------------------
Mon Apr 9 10:58:07 CEST 2001 - freitag@suse.de
- applied snapscan-patch, fixed problem with missing gimp-plugin-link
-------------------------------------------------------------------
Fri Mar 30 16:43:20 CEST 2001 - uli@suse.de
- fixed to build on PPC
-------------------------------------------------------------------
Fri Mar 23 16:43:36 CET 2001 - freitag@suse.de
- removed dependency to gimp, patch to solve timing probs with
kernel 2.4
-------------------------------------------------------------------
Fri Jan 5 11:56:32 CET 2001 - freitag@suse.de
- updated to version 1.0.4
-------------------------------------------------------------------
Wed Dec 20 09:04:44 CET 2000 - ro@suse.de
- fixed symlink
-------------------------------------------------------------------
Mon Nov 20 18:51:03 CET 2000 - freitag@suse.de
- hide parport-scanner in standard sane distribution in dll.conf
-------------------------------------------------------------------
Wed Nov 15 09:24:39 CET 2000 - freitag@suse.de
- skipped parport-scanner driver also for axp
-------------------------------------------------------------------
Tue Nov 7 16:19:16 CET 2000 - freitag@suse.de
- skipped parport-scanner for ppc and sparc
-------------------------------------------------------------------
Mon Nov 6 10:09:48 CET 2000 - freitag@suse.de
- fixed Copyright/License-Field in SpecFile
-------------------------------------------------------------------
Thu Nov 2 23:55:53 CET 2000 - ro@suse.de
- fix neededforbuild for new package-names
-------------------------------------------------------------------
Thu Nov 2 10:40:01 CET 2000 - freitag@suse.de
- new version 1.0.3
patch for Artec AS6E scanner
patch for HP4200 PPort Scanner
-------------------------------------------------------------------
Mon Sep 25 18:44:41 CEST 2000 - uli@suse.de
- fixed to build with new GIMP
-------------------------------------------------------------------
Mon Sep 25 16:33:19 MEST 2000 - egger@suse.de
- Upgraded to 1.0.3.
- Added -DGIMP_ENABLE_COMPAT_CRUFT to build again.
- The specfile is quite messy... maybe the maintainer could clean
that up, please?
-------------------------------------------------------------------
Mon Sep 25 01:04:16 CEST 2000 - ro@suse.de
- changed neededforbuild: libgimpd -> gimpdev
-------------------------------------------------------------------
Tue Sep 12 14:15:34 CEST 2000 - mhafner@suse.de
- added suse_update_config
-------------------------------------------------------------------
Tue Jun 27 11:22:16 CEST 2000 - freitag@suse.de
- libs back to /usr/lib/sane - except libsane.so. and libsane-dll
-------------------------------------------------------------------
Fri Jun 2 18:00:43 CEST 2000 - freitag@suse.de
- problem with missing headerfiles and wrong linked libs fixed.
-------------------------------------------------------------------
Wed May 24 16:28:05 CEST 2000 - freitag@suse.de
- new configure switch --enable-scsibuffersize due to reported
problems on the SANE-Mailinglist.
- installed *all* sane-libraries to /usr/lib
-------------------------------------------------------------------
Tue Mar 21 10:02:35 CET 2000 - bodammer@suse.de
- backend for Agfa SnapScan V0.8 again
-------------------------------------------------------------------
Mon Mar 20 12:57:59 CET 2000 - bodammer@suse.de
- update -> sane-1.0.2
link to libsane-dll.so.1 included for xsane to work
-------------------------------------------------------------------
Sat Mar 4 16:31:40 CET 2000 - ro@suse.de
- removed libgimp from neededforbuild
-------------------------------------------------------------------
Thu Mar 2 15:46:18 CET 2000 - uli@suse.de
- moved man pages to _mandir
-------------------------------------------------------------------
Mon Feb 7 15:57:14 CET 2000 - kukuk@suse.de
- Don't check for asm/io.h, this will not work on SPARC
-------------------------------------------------------------------
Tue Jan 18 15:38:21 CET 2000 - bodammer@suse.de
- backend for Agfa SnapScan updated to V0.8
works with new sg-modul from kernel > 2.2.5
-------------------------------------------------------------------
Fri Oct 15 09:39:22 CEST 1999 - ro@suse.de
-xscanimage: renamed GIMP_EXTENSION to IS_GIMP_EXTENSION
(GIMP_EXTENSION is already used as enumerator as of gimp-1.1.10)
-------------------------------------------------------------------
Mon Sep 13 17:23:57 CEST 1999 - bs@suse.de
- ran old prepare_spec on spec file to switch to new prepare_spec.
-------------------------------------------------------------------
Thu Sep 2 19:02:36 CEST 1999 - ro@suse.de
- update to 1.0.1
- fixed neededforbuild to get gimp-support back
- removed tcl tk from neededforbuild
-------------------------------------------------------------------
Sun Jul 18 11:44:25 MEST 1999 - mha@suse.de
- removed '#' in front of /usr/sbin/saned in sane.spec
for mb who isn't here today ;-)
-------------------------------------------------------------------
Tue Jul 13 12:42:22 MEST 1999 - bs@suse.de
- use gtk and glib instead of gtkn and glibn
-------------------------------------------------------------------
Fri Mar 19 14:16:40 MET 1999 - mb@suse.de
- fixed gtkn, gtkndev, glibn, glibndev dependencies
-------------------------------------------------------------------
Thu Nov 26 15:15:53 MET 1998 - mb@suse.de
- major update to version 1.0
- new enhanced drivers for Abaton, Agfa Focus and Ricoh scanners
- Kodak DC210 still not supported
- Update for many drivers (Artec,Kodak,DC25,Microtek,Microtek2,Mustek
UMAX and SnapScan).
- removed sgcheck. sgcheck now is in scsiinfo.
-------------------------------------------------------------------
Mon Nov 23 15:07:44 MET 1998 - mb@suse.de
- added sgcheck tool. It scans /proc/scsi/scsi and tells you
exactly the generic scsi ID of your SCSI devices, respectively
your scanner.
- added README.sgcheck
-------------------------------------------------------------------
Wed Nov 18 09:02:40 MET 1998 - ro@suse.de
- added libsane.so
-------------------------------------------------------------------
Tue Nov 17 16:52:19 MET 1998 - ro@suse.de
- adjust neededforbuild to current distribution
-------------------------------------------------------------------
Fri Nov 13 14:49:08 MET 1998 - mb@suse.de
- new version 0.74
- new and more scanners supported
- automatically detects attached scanners
-------------------------------------------------------------------
Mon May 25 13:39:12 MEST 1998 - mb@suse.de
- new version 0.73
- according to author may still cause trouble with microtek2 scanners!!
- uses new gtk1.0.1
- added scanners to supported list
- lots of bug fixed
-------------------------------------------------------------------
Wed Mar 11 18:20:24 MET 1998 - ro@suse.de
- added libsane.so.0 to filelist
-------------------------------------------
Wed Feb 4 14:53:43 MET 1998 - mb@suse.de
- new version 0.70
- added support for various scanners, such as agfa, microtek etc.
- bugfixing for umax scanners
-------------------------------------------
Sun Sep 21 21:17:00 MEST 1997 - mb@suse.de
Initial version 0.63
-------------------------------------------
Reference in New Issue View Git Blame Copy Permalink