9ba80bfb1b- update to scamper 20250106: * scamper: * handle many ports in BPF compiler better. * remove cycles, autoreload features from file input sources. * do not compile in support for select(2) by default (saving CPU and memory in the default use). * normalize kqueue(2) / epoll(2) code paths. * use IP_RECVIF on platforms (FreeBSD) that don't have IP_PKTINFO. * remove sig_tx_ip_src from task signature structure, nothing used it. * add holdtime (-H) parameter back to scamper, will controls the length of time that scamper will hold task signatures before allowing a follow up measurement to use the same signature. 5 seconds by default, disable with zero (to save memory and CPU). * fix compilation when platform has IPV6_PKTINFO but not IPV6_RECVPKTINFO setsockopt (old platforms). * replace calls to getaddrinfo AI_NUMERICHOST with calls to inet_pton (fixes complilation on old MacOS, and is probably the faster solution generally). * increase pps-max (scamper -p) to 50,000. * adjust timestamps using datalink timestamps when using trace -N <squeries>. * reduce memory use in storing traceroute state. * remove per-measurement pktbufs, to save a tiny amount of memory. * refactor BPF compiler to make it more obvious what is going on. * refactor ping task signatures to make it more obvious what is going on. * refactor scamper's timeout calculation to make it more obvious what is going on. * move output of done tasks into its own function to make it more obvious what is going on.
devel
Sebastian Wagner
2025-01-12 13:54:04 +00:00
7712fcbe96Accepting request 1226006 from network:utilities
Ana Guerrero
2024-11-24 10:05:00 +00:00
fedd3edb57update to version 20241112:
Sebastian Wagner
2024-11-16 18:10:40 +00:00
4dad880db7Accepting request 1204698 from network:utilities
Ana Guerrero
2024-09-30 13:41:56 +00:00
7a5068c130fix mail address
Sebastian Wagner
2024-09-23 07:44:47 +00:00
df80a0db70* update to version 20240920: * scamper: * add -O noring to disable use of ring buffer on Linux when scamper is configured with --enable-scamper-ring * udpprobe: add -S src parameter, update manual page with previously supported but undocumented options * sc_prefixprober: * allow do-not-probe list to be embedded in the input set of prefixes to probe, update manual page. * add -v to emit version of scamper release the sc_prefixprober utility came from * Python module: * add src parameter to ScamperCtrl.do_udpprobe * update to version 20240916: * scamper: * with ping -F 0 and trace -s 0, choose a different TCP or UDP source port if an otherwise available source port has been used in the past 5 seconds to the same destination IP and port. * ping: add udp-sport probe method * ping: refactor udp packet matching on datalink sockets * allow -D when outputting to a file. * use SO_TIMESTAMP on linux packet sockets, rather than call an ioctl, to fix buggy linux timestamps when not using ring * rework privsep code to be signal aware, and forward signals from scamper's privileged process to scamper's unprivileged process via the socketpair between the processes. i.e., scamper -D -U /path/to/scamper-unix-socket -e /path/to/scamper.pid kill -HUP cat /path/to/scamper.pid now works. TERM and INT also propagate from privileged to unprivileged process. this allows the user that started scamper to
Sebastian Wagner
2024-09-23 07:41:09 +00:00
c210666313Accepting request 1194649 from network:utilities
Ana Guerrero
2024-08-19 21:45:19 +00:00
c6153d0eff- Remove upper bound on Cython, Cython 3 appears to be supported.
Sebastian Wagner
2024-08-19 07:17:42 +00:00
c013adc733- update to version 20240716: * scamper * add -O dl-any option to scamper, which causes scamper to open a cooked datalink interface bound to "any" on Linux. Note that scamper's implementation of -O dl-any currently prevents transmission of packets on the datalink socket, but this will change in the future. * add -O dyn-filter option to scamper, which causes scamper to dynamically adjust the BPF filter that it configures on a datalink socket according to TCP/UDP ports that scamper is using. this option is only available on Linux, and BSD systems with BIOCSETFNR (FreeBSD and MacOS). note that both -O dyn-filter and -O dl-any cannot currently be used at the same time, but this will change in the future. * only raise SO_SNDBUF and SO_RCVBUF; some systems (e.g. Linux) already have larger socket buffers than scamper's defaults. * add -O sockrx to ping, to force ping to receive ICMP responses over a regular socket, even when using -O dl (which still records datalink transmit timestamps). * speed up receiving on datalink sockets by avoiding unnecessary memsets and removing unused fields, and adjust BSD, Linux, DLPI code to follow similar code patterns. * consider both directions for TCP packets on datalink sockets, allowing datalink transmit timestamps to be recorded for non TCP-syn packets. * avoid processing duplicate copies of the same packet on Linux loopback interface with datalink sockets. * remove "observe" functionality from scamper control socket, as signalled over a year ago. "outfile" and "source" will be removed from the control socket in the future.
Sebastian Wagner
2024-08-17 08:20:36 +00:00
453da8f980Accepting request 1174255 from network:utilities
Ana Guerrero
2024-05-15 19:29:15 +00:00
5b9372f13eAccepting request 1173966 from home:dimstar:Factory
Martin Hauke
2024-05-15 13:28:03 +00:00
a6bce56c48* update to version 20240503: * scamper: * improvements with -N squeries; let -Q send all probes when using -N. add -H wait-probe-hop, which specifies the minimum delay between probes with the same TTL. identify the hop that would have caused traceroute to stop when not using -N so that a normal traceroute path with one hop representing the destination or stopping hop in the path is rendered. in the json output, put extra hops beyond the stopping hop into a extra_hops array. * make ring-nolocked the default when using -O ring. * improvements with udpprobe: provide ability to send multiple copies of the same payload, add json output, reuse available UDP sockets where possible. * consistently set and record the IPv4 tos and IPv6 tclass fields for both ping and trace. * fix warts.bz2 and warts.xz output, which could previously use all available space on the file system. * speed up rendering of byte arrays as hex in json output. * fix obtaining IPv6 hoplimit on received packets on MacOS. * record the name of the interface that received IPv4 and IPv6 ICMP responses in ping. * add TXT queries to host command; add chaos query class; add DNS-over-TCP. * fix use of ctype functions according to netbsd (cast all parameters to unsigned char). make pass through use of ctype functions to do ctype function calls last in most logical statements. * cleanup scamper_file_warts.h so that only necessary struct definitions are in that header. * libscamperfile: * add new functions, bump library version due to udpprobe changes.
Sebastian Wagner
2024-05-05 14:25:28 +00:00
d84c1c95b2Accepting request 1158597 from network:utilities
Ana Guerrero
2024-03-17 21:16:24 +00:00
eee3abab7c- update to 20240229: * bugfix: correct SCAMPER_DL_IS_ICMP_TIME_REPLY macro so that scamper does not ignore ICMP replies quoting TCP/UDP packets for 1/256 source port values. * bugfixes for -O icmp-rxerr: handle EPOLLERR on linux, try using IPV6_RECVHOPLIMIT before IPV6_HOPLIMIT for IPv6 udp probing. * bugfix: fix possible assertions in dealias, trace, and tracelb code. * ping: count UDP replies as from the target * trace: correct datalink timestamp adjustments * add more specific error messages when a scamper command is not accepted, return them over control socket or terminal, as appropriate. * scamper_fd_t: refactor fd_addr, fd_sport, fd_dl, fd_ifindex * scamper_fd_t: decouple udp4raw/udp4dg from each other. use udp4dg and udp6 sockets in udpprobe primitive, rather than have each udpprobe task create its own socket. * scamper_fd_t: add methods that return an available open socket for probing a given destination without blocking if another task is probing the same destination. use this with ping -F 0 and trace -s 0, instead of generating random port values, so that scamper opens the minimum number of file descriptors. * ping and trace: have -O dl mean to capture transmit and receive timestamps from a datalink interface. add -O raw option so that IPv4 TCP probes can be transmitted over a raw socket, to allow transmitted TCP packets to be observed on the datalink interface. * add memory-mapped ring buffer support (PACKET_RX_RING) for receiving packets on datalink sockets on Linux. enable at scamper runtime with -O ring. contributed by Alistair King. ## python module: * generate module .c with Cython 0.29.37, to enable module to compile with Python 3.11.Dirk Mueller2024-03-16 19:38:49 +00:00
34d121d490Accepting request 1146332 from network:utilities
Ana Guerrero
2024-02-13 21:43:34 +00:00
12ee8797cb- Temporarily disable Python build because of incompatibility with Python 3.11 Reported upstream, will be fixed in next version.
Sebastian Wagner
2024-02-06 09:08:11 +00:00
27e30edc2b- Update to version 20240122: * scamper * fix regression in 20240117 where trace -W 0 (probe as soon as there's a response) was not accepted, despite being the default. add unit test for this. * for trace, improve probe and reply matching of UDP packets * fix printing UDP responses to traceroute probes in scamper -O text output * for trace section of scamper.1 man page, document -O const-payload, and expand documentation for -O dl. * python module: * ship scamper release with a the C source code pre-generated for the python module, so that the build process does not require a cython installation. bootstrap.pl will build the C source code unless told not to via --without-cython * rename ScamperPing.reply_count to ScamperPing.stop_count, as the reply_count attribute meant something different on a ScamperPing object than what it means with ScamperDealiasProbe, etc * sc_remoted: * expand sc_remoted.1 manual page with information about validating scamper client TLS certificates, and how to use -M monitor-name.
Sebastian Wagner
2024-02-05 13:05:30 +00:00
89e3484b33Accepting request 1139442 from network:utilities
Ana Guerrero
2024-01-17 21:18:20 +00:00
db3c5b4063enable python build
Sebastian Wagner
2024-01-17 08:32:55 +00:00
3cfb3e1100- update to version 20240117: - scamper: - fix crashes if a task is provided an apparent response, but the task - has not yet sent a packet in ping, sting, tbit, trace, tracelb. - find and fix memory leaks in measurement command parsing code via - fuzzing. - add udpprobe, http, dealias -m midarest, and dealias -m midardisc methods. - udpprobe and http do not currently have json output methods. - remove -d dport, -s sport, and -t ttl dealias parameters. these - were only valid for mercator, and can be specified in a probedef instead. - record size of responses for dealias probes. - modify all commands to be able to take human-friendly wait parameters -- - e.g. trace -W 0.5s or trace -W 500ms instead of trace -W 50000. - support transmitting raw packets on linux ppp interfaces - add -b payload-size parameter to ping - python interface: - add python interface to most of scamper. building this module requires - cython < 3.0. to build, use something like: - PYTHON=/path/to/python CYTHON=/path/to/cython ./configure --with-python - the documentation for this interface is available at - https://www.caida.org/catalog/software/scamper/python/ - the ubuntu PPA provides python3-scamper, and the FreeBSD port should - hopefully provide py-scamper shortly. these sources may be useful - for getting the module packaged for other operating systems. - https://launchpad.net/~matthewluckie/+archive/ubuntu/scamper - libscamperfile and libscamperctrl: - improvements, bump versions - tests: - many new unit tests and fuzzing cradles for scamper components - sc_pinger:
Sebastian Wagner
2024-01-17 07:36:50 +00:00
c423a01fa3Accepting request 1125095 from network:utilities
Ana Guerrero
2023-11-14 20:41:49 +00:00
b51b8b3eff- update to 20230614d (bsc#1217032): * fix buffer overflow when parsing TCP packets where the sender includes a TCP fast open cookie larger than 16 bytes sc_hoiho man pageDirk Mueller2023-11-10 16:51:49 +00:00
90d5f8629cAccepting request 1117776 from network:utilities
Ana Guerrero
2023-10-15 17:27:31 +00:00
064d682b95- update to version 20230614c: - scamper: * fix compile-on-windows support; use icmp-echo probes instead of UDP probes for traceroute on windows; provide "attach" support on windows. * fix compile-on-FreeBSD-15+ where pf firewall does not have DIOCGETSTATUS ioctl * in scamper's remote control (-R option), fix file descriptor leak when unable to reconnect to the remote controller. * add --disable-scamper-trace --disable-scamper-ping --disable-scamper-tracelb --disable-scamper-dealias --disable-scamper-tbit --disable-scamper-sting --disable-scamper-sniff --disable-scamper-host configure options to build scamper without specific measurement capabilities. - sc_attach: * add windows support
Sebastian Wagner
2023-10-07 09:05:57 +00:00
eea1a9bb0bAccepting request 1103654 from network:utilities
Dominique Leuenberger
2023-08-13 17:18:00 +00:00
9fb196c62b- update to version 20230614b: - scamper: * fix handling of EPOLLHUP on client disconnection -- Linux-specific (scamper -U /path/to/socket) - libscamperctrl: * fix handling of disconnected instances
Sebastian Wagner
2023-08-13 06:11:20 +00:00
e3f2f25c41Accepting request 1103080 from network:utilities
Dominique Leuenberger
2023-08-09 15:26:13 +00:00
667e4b3cd1- update to version 20230614a * configure: * better tests for zlib, libbz2, and liblzma that check for both libraries and headers. * change --with-sc_uptime, --with-sc_hoiho, and --with-tests to be --enable-sc_uptime, --enable-sc_hoiho, and --enable-tests * disable maintainer mode, pass foreign to AM_INIT_AUTOMAKE * scamper: * remove reading regular files from poll/select/epoll/kqueue path, which fixes reading regular input files (-f option to scamper) using epoll or kqueue * fix reading stdin as input (-f option to scamper) when using epoll (catch EPOLLHUP) * add DNS server to host signature, add host path for scamper_task_find * rework scamper_osinfo to work with malformed release names (uname -r) * dealias: do not crash on malformed prefixscan and bump commands * dealias: fix memory leak of probedefs on malformed commands * sting: fix memory leak of recorded packets * remove tsps input method (-O tsps option to scamper) * update manual page * libscamperctrl: * link against list.o and splaytree.o so that the library is self-contained * fix memory leak when task is not accepted * API improvements * libscamperfile: * fix memory leak when reading SOA/MX from warts file * fix memory leak when reading PMTUD traceroute structures from warts file * sting: fix memory leak of recorded packets * sc_analysis_dump, sc_warts2pcap, sc_wartscat, sc_wartsfilter: * link against list.o/utils.o so that these utilities are not reliant on
Sebastian Wagner
2023-08-09 06:01:41 +00:00
a97df218c9Accepting request 1100776 from network:utilities
Ana Guerrero
2023-07-26 11:25:01 +00:00
c288670f56fix package names with SONAME
Sebastian Wagner
2023-07-19 07:19:46 +00:00
2685ddb3d0- update to version 20230605: * HEADSUP: if you previously used -e pidfile to record the pid of a running scamper process, there is a good chance that the pidfile is owned by root. scamper now attempts to write this file using the uid that started scamper, and will not be able to write it if scamper is not started by root (it should not be, rather the scamper binary should be setuid root). Please delete the existing pidfile, or change its ownership, prior to restarting scamper, or scamper will not start. * scamper: * write a process ID that the user that started scamper can kill in the pidfile when using privsep. * when using privsep, exit the unprivileged process if the privileged process exits (is killed) * run as real uid from the start of scamper, for both privsep and not-privsep. * fix bug where attempting to open an unsupported datalink would leave a freed scamper_fd_t in the fd_tree and fd_list, leading to a crash. * fix double free triggered when a user provides an invalid dealias command. * fix memory leak if the payload was specified twice to ping or trace * rework pollfunc selection logic, use kqueue/epoll by default. * remove _malloc_options = "AJ" as this only works on unsupported versions of FreeBSD. * add additional paramaters to attach command to allow the user to override list and cycle parameters, documented in manual page. * catch EAGAIN/EINTR from select/kqueue/epoll to allow gdb to attach and detach without flagging errors. * for DNS replies for host command, record reply flags and rcode. * add support for SOA and NS queries in host.
Sebastian Wagner
2023-06-13 07:04:10 +00:00
9cd03652bbAccepting request 1071453 from network:utilities
Dominique Leuenberger
2023-03-14 17:17:28 +00:00
66bebe1832- Update to version 20230302: - scamper: * use a random source port / ICMP ID in trace if -s 0. * better parallelize pings to a single destination that use udp-dport, tcp-ack-sport, or tcp-syn-sport probe methods. * document default value of source port consistently for all measurements that take a source port parameter in the man page. - sc_wartscat: * print useful error messages when encountering an error. * add ability to merge neighbourdisc, tbit, sting, sniff, and host.
Sebastian Wagner
2023-03-07 09:48:03 +00:00
e010f3976aAccepting request 1067531 from network:utilities
Dominique Leuenberger
2023-02-24 17:08:12 +00:00
d626f529a3- Update to version 20230224: - scamper: - allow multiple parallel measurements to the same destination, - provided the measurements have probe signatures that scamper can - distinguish. - return the associated task ID with each DATA blob in control socket. - this task ID matches the ID returned in an OK when scamper accepted - the task. - in ping, only compute delay statistics on responses from destination. - in ping, allow timeout to be expressed in fractions of a second. - libscamperfile: - support reading gz-compressed warts files. - libscamperctrl: - add libscamperctrl, a library to interact with a collection of - scamper instances. - modify sc_ally, sc_filterpolicy, sc_prefixscan, sc_speedtrap, and - sc_pinger to use this library. - this library is likely to evolve. current behaviour is documented - in libscamperctrl manual page. - misc: - improve sc_wartsfilter manual page with examples. - add remote control socket support to sc_pinger. - fix kqueue/epoll loop in sc_remoted. - consistently use size_t throughout when counting number of items. - build without warnings using -Wextra -Wno-unused-parameter. - improvements through adding function attributes to printf-like - functions. - deorbit some unused functions from utils.c.
Sebastian Wagner
2023-02-24 08:19:52 +00:00
968238b113Accepting request 1056160 from network:utilities
Dominique Leuenberger
2023-01-05 14:01:36 +00:00
5e6419ea45- Update to version 20211212e: - scamper: * gracefully handle situations where there is no /etc/resolv.conf, or no nameserver lines in an /etc/resolv.conf but a measurement or scamper-internal task wants to resolve a name * tidy up buggy prinf-like statements in scamper and some drivers. - warts/json: * in JSON output for ping, print the TCP/UDP src/dst ports or ICMP id/seq used in individual probe packets, * fix regression in libscamperfile so that it can read old warts files.
Sebastian Wagner
2022-12-29 09:09:24 +00:00
cdb2899475Accepting request 1038311 from network:utilities
Dominique Leuenberger
2022-11-26 17:45:46 +00:00
53cd9f19a1- Update to version 20211212d: - scamper: * add tcp-syn-sport method to ping, document in scamper(1) manual page - documentation: * document trace json object in sc_warts2json(1) manual page
Sebastian Wagner
2022-11-19 07:26:24 +00:00
e0cb7acd72Accepting request 999230 from network:utilities
Dominique Leuenberger
2022-08-25 13:09:37 +00:00
e9015c12e6- scamper: * add an option (-O cafile=/path/to/file) to load CA certificates from a specific file when starting scamper for validating a remote controller's certificate (this was released in 20211212a) * add options -O client-certfile=/path/to/certfile and -O client-privfile=/path/to/privfile to have scamper present a client certificate during a TLS handshake with a remote controller * fix bugs that prevent scamper from reconnecting to a remote controller * fix -d debugfile when scamper is built with privilege separation * fix bug when writing neighbordisc measurements to warts file that prevents a neighbordisc measurement from being read * fix bug when reading some tracelb measurements with unresponsive hops from a warts file * allow user to specify fractions of a second to ping timeout (-W) * use a random source port / ICMP ID in ping if -F 0 - sc_remoted: * add -C option to specify a CA PEM file to verify client certificates presented by scamper instances. * add -O skipnameverification option to tell sc_remoted to verify scamper presents a certificate signed by the CA, but do not do name verification
Sebastian Wagner
2022-08-18 10:05:09 +00:00
30f38d7119- Update to version 20211212b: - No changelog available.
Sebastian Wagner
2022-08-18 09:30:49 +00:00
974c97608eAccepting request 972966 from network:utilities
Dominique Leuenberger
2022-04-26 19:42:40 +00:00
d69fbd769dAccepting request 972637 from home:dimstar:Factory
Sebastian Wagner
2022-04-26 18:51:45 +00:00
9590815466- add provices/obsoletes for old libscamperfile1 sub-package.
Sebastian Wagner
2022-02-25 20:31:15 +00:00
c7e403a7f2- Update to version 20211212a: - No changelog available.
Sebastian Wagner
2022-02-12 18:38:48 +00:00
eded4f16b1Accepting request 927844 from network:utilities
Dominique Leuenberger
2021-10-27 20:21:26 +00:00
50ce79544f- update to 20211026: scamper: * in trace, allow probes to multiple consecutive hops to be outstanding in the network without having to stop and wait, using the -N parameter documented in scamper's man page. * in trace, do optional PTR lookups using the option documented in scamper's man page. output these hostnames into warts and json outputs. * bump libscamperfile version for the above changes. * document that scamper's control socket can be told to return JSON through an option now documented in scamper's man page. * improvements to reading warts files via fuzzing. * other man page tidy ups. sc_erosprober: * add the ability to adjust the probe list at run time through a unix domain socket, documented in the sc_erosprober man page. sc_hoiho: * add the ability to learn regular expressions that extract geographic hints from router hostnames, documented in the sc_hoiho man page
Sebastian Wagner
2021-10-27 19:05:05 +00:00
6bb7213a28Accepting request 884742 from network:utilities
Dominique Leuenberger
2021-04-14 08:10:44 +00:00
77d3eb46e6- update to version 20210324: sc_speedtrap: * speed up speedtrap's runtime
Sebastian Wagner
2021-04-05 19:37:17 +00:00
8d922cccedAccepting request 838687 from network:utilities
Dominique Leuenberger
2020-09-30 17:54:56 +00:00
3cdacb1c02- update to version 20200923: - scamper: * integrate some fixes for compiling scamper on windows - sc_erosprober: * allow larger probe intervals - sc_hoiho: * add support for learning regexes that extract ASNs in hostnames
Sebastian Wagner
2020-09-23 06:35:33 +00:00
47e1db5cbdAccepting request 822765 from network:utilities
Dominique Leuenberger
2020-07-27 15:42:07 +00:00
2c9e5facfa- update to version 20200717: - scamper: - update remote control protocol to support session resumption if the underlying TCP connection is interrupted. - if remote controller is specified with a domain name, use TLS. - fix -p pidfile when starting scamper as a daemon - expire entries in the ARP cache periodically - add -r support to ping and tracelb, and record router addresses in warts output. - autoconf work to build on linux without sys/socketvar.h or linux/netlink.h - allow scamper to do IPv4 ICMP echo and IPv6 UDP traceroute without requiring root on linux. - libscamperfile version 1.0.0 - sc_remoted: - update remote control protocol to support session resumption if the underlying TCP connection is interrupted. - use HUP signal to reload TLS certificate and private key chain - add -e pidfile to write PID to file, to make HUP easy - sc_pinger: - add utility to ping a set of addresses with ICMP echo, UDP, and TCP-ack probes - throughout: - reduce number of warnings when compiling with -Wextra - remove rcsid from all files
Sebastian Wagner
2020-07-18 13:44:34 +00:00
334505d6a1Accepting request 787169 from network:utilities
Dominique Leuenberger
2020-03-22 13:18:17 +00:00
57a24fc805- update to version 20191102b: - scamper: * do not dereference a null pointer when converting a tracelb node with no IP address to a string, when generating json output. - sc_bdrmap: * allow the source IP address to be specified when probing with the -S parameter. - sc_wartsfilter: * a new utility to select specific records from a warts file
Sebastian Wagner
2020-03-14 17:22:07 +00:00
c2f5eb88d3Accepting request 764225 from network:utilities
Dominique Leuenberger
2020-01-14 20:09:16 +00:00
b0021fd2e0-update to version 20191102: * scamper * escape hostname in json output for tracelb * use length parameters when parsing hostname responses, from Marianne Fletcher * sc_bdrmap * add a -O noalias option to tell bdrmap to not do alias resolution. * update -C documentation in the sc_bdrmap.1 man page * fix a memory leak of trace objects in -d traces * print RTT in -d traces * add an -M option to help corner cases with private and IXP addresses * relax heuristics to allow VPs to claim routers with IP2AS when no other router assignments can take place * turn off analytical interface alias resolution heuristics by default * sc_hoiho * change -O verbose to -O debug to better reflect what it does. * change tpa to atp to be consistent with language in paper https://www.caida.org/~mjl/pubs/rnc.pdf * free a malloc, pointed out by clang static analysis * add support for reading -d 3 output, which is the format of regular expressions provided in the data supplement: http://data.caida.org/datasets/supplement/2019-imc-hoiho/ * sc_uptime * add a metadata table to be able to track metadata across sc_uptime invocations, from Marianne Fletcher * fix an error message when trying to create a database that already exists.
Sebastian Wagner
2020-01-07 09:29:43 +00:00
dab6abe065Accepting request 733235 from network:utilities
Dominique Leuenberger
2019-09-26 18:41:18 +00:00
488ebb0840- remove SIOCGSTAMP.patch - update to version 20190916: * scamper * add a host implementation for looking up DNS records. it uses the first nameserver it finds in /etc/resolv.conf by default. * add an -O ptr option to tracelb. * bugfix json output for tracelb. * integrate patricia trie implementation into scamper hotspot * use HAVE_SYSCTL macro to solve a compile issue on android * include <linux/sockios.h> to get SIOCGSTAMP in Linux kernel > 5.2 * add -A option to ping code to set the ack number to use in tcp probes (or sequence number in SYN packets). do not randomly generate sequence and ack values for each TCP ping. * rework options handling to allow for long long values. * set the window size in TCP probes to 65535, instead of advertising a zero receive window. * update configure scripts around the use of --with-privsep-dir-owner * sc_ally: * when outputting alias sets, conduct a canonical sort to allow for easy diffs * update man page because sc_ally can take more than two addresses per line * sc_erosprober: * new driver to periodically probe addresses and rotate output files. * sc_hoiho: * new utility for holistic orthography of Internet hostname observations. this utility is only built if --with-sc_hoiho is passed to configure. sc_hoiho requires pcre or pcre2, which can be controlled by passing --with-pcre or --with-pcre2 to configure. * sc_uptime:
Sebastian Wagner
2019-09-18 19:50:19 +00:00
b6b1b9f039Accepting request 724879 from network:utilities
Dominique Leuenberger
2019-08-22 08:53:24 +00:00
4a4ff38929- add SIOCGSTAMP.patch for recent changes in socket.h/socketios.h
Sebastian Wagner
2019-08-20 19:35:36 +00:00
69d54f9773Accepting request 674629 from network:utilities
Dominique Leuenberger
2019-02-14 13:35:08 +00:00
ff3c4b5fb9- update to version 20181219:
Sebastian Wagner
2018-12-22 22:08:14 +00:00
8ea1daea84Accepting request 621094 from network:utilities
Dominique Leuenberger
2018-07-06 08:47:28 +00:00
0083089b14- update to version 20180504: * scamper: * increase the size of a buffer in scamper's traceroute json creation to reduce chance of truncation. * print the number of probes sent by traceroute in the json output. * enforce a minimum firsthop value of 1 when reading a warts traceroute object. * sc_bdrmap: * choose a static ICMP checksum value when using Paris traceroute to reduce churn in observed topology in bdrmap output. * add ability to pass list of ASes to -d traces to see traceroutes towards specific ASes, useful for understanding bdrmap inferences.
Sebastian Wagner
2018-05-06 08:25:38 +00:00
b856241676- update to version 20180309:
Sebastian Wagner
2018-03-08 19:45:06 +00:00
bfbaf306c8Accepting request 555881 from network:utilities
Dominique Leuenberger
2017-12-11 17:57:23 +00:00
ae6e3389f3- remove new-openssl.patch, included upstream - update to version 20171204: - scamper: * add a blind-fin tbit test, which tests receiver behavior to TCP FIN packets which could have come from an off-path attacker. - sc_radargun: * add -d 2 option, which dumps interface IP-ID behavior classifications.
Sebastian Wagner
2017-12-04 08:48:06 +00:00
06c7984544Accepting request 546902 from network:utilities
Dominique Leuenberger
2017-12-01 14:54:16 +00:00
d5513388c9- add patch new-openssl.patch to compile with new openssl versions
Sebastian Wagner
2017-11-30 21:25:05 +00:00
d57bb39fe4Accepting request 518488 from network:utilities
Dominique Leuenberger
2017-08-24 16:56:32 +00:00
53a6ceecfb- fix license, is GPL-3.0+
Sebastian Wagner
2017-08-24 07:06:46 +00:00
6083158e3dAccepting request 505838 from network:utilities
Yuchen Lin
2017-08-10 12:02:10 +00:00
7f7c2b3c34Accepting request 505786 from home:sebix:branches:network:utilities
Martin Hauke
2017-06-23 06:33:25 +00:00
5fe6610e5dAccepting request 433945 from home:mnhauke:security
OBS User mrdocs
2016-10-11 06:18:50 +00:00
c9e22147e6Accepting request 420925 from home:mnhauke:security
Martin Hauke
2016-08-21 18:30:56 +00:00
1ba60e39b5Accepting request 419800 from home:mnhauke:security
OBS User mrdocs
2016-08-19 21:59:42 +00:00
Dominique Leuenberger
Sebastian Wagner
Ana Guerrero
Martin Hauke
Dirk Mueller
Yuchen Lin
OBS User mrdocs