diff --git a/libsensors-visibility.patch b/libsensors-visibility.patch
index 609db3a..6cbdf70 100644
--- a/libsensors-visibility.patch
+++ b/libsensors-visibility.patch
@@ -1,6 +1,11 @@
+---
+ lib/Module.mk      |    2 +-
+ lib/libsensors.map |   23 +++++++++++++++++++++++
+ 2 files changed, 24 insertions(+), 1 deletion(-)
+
 --- /dev/null
 +++ lib/libsensors.map
-@@ -0,0 +1,20 @@
+@@ -0,0 +1,23 @@
 +{
 +global:
 +  libsensors_version;
@@ -19,6 +24,9 @@
 +  sensors_set_value;
 +  sensors_snprintf_chip_name;
 +  sensors_strerror;
++  sensors_parse_error;
++  sensors_parse_error_wfn;
++  sensors_fatal_error;
 +local: *;
 + };
 --- lib/Module.mk.orig
diff --git a/lm_sensors-r5910-detect-new-Nuvoton-superio.patch b/lm_sensors-r5910-detect-new-Nuvoton-superio.patch
new file mode 100644
index 0000000..22d33b1
--- /dev/null
+++ b/lm_sensors-r5910-detect-new-Nuvoton-superio.patch
@@ -0,0 +1,36 @@
+Add detection of Nuvoton NCT5571D, NCT5577D and NCT6776F.
+
+---
+ prog/detect/sensors-detect |   14 +++++++++++++-
+ 1 file changed, 13 insertions(+), 1 deletion(-)
+
+--- lm_sensors-3.2.0.orig/prog/detect/sensors-detect
++++ lm_sensors-3.2.0/prog/detect/sensors-detect
+@@ -1790,7 +1790,7 @@ use constant FEAT_SMBUS	=> (1 << 7);
+ 		logdev => 0x0b,
+ 		features => FEAT_IN | FEAT_FAN | FEAT_TEMP,
+ 	}, {
+-		name => "Nuvoton W83667HG-B Super IO Sensors",
++		name => "Nuvoton W83667HG-B (NCT5571D) Super IO Sensors",
+ 		driver => "w83627ehf",
+ 		devid => 0xB350,
+ 		devid_mask => 0xFFF0,
+@@ -1808,6 +1808,18 @@ use constant FEAT_SMBUS	=> (1 << 7);
+ 		driver => "not-a-sensor",
+ 		devid => 0x61,
+ 	}, {
++		name => "Nuvoton NCT5577D Super IO Sensors",
++		driver => "to-be-written",
++		devid => 0xC331,
++		logdev => 0x0b,
++		features => FEAT_IN | FEAT_FAN | FEAT_TEMP,
++	}, {
++		name => "Nuvoton NCT6776F Super IO Sensors",
++		driver => "to-be-written",
++		devid => 0xC333,
++		logdev => 0x0b,
++		features => FEAT_IN | FEAT_FAN | FEAT_TEMP,
++	}, {
+ 		name => "Fintek F71805F/FG Super IO Sensors",
+ 		driver => "f71805f",
+ 		devid => 0x0406,
diff --git a/lm_sensors-r5913-default-config-NCT677xF.patch b/lm_sensors-r5913-default-config-NCT677xF.patch
new file mode 100644
index 0000000..8edd367
--- /dev/null
+++ b/lm_sensors-r5913-default-config-NCT677xF.patch
@@ -0,0 +1,14 @@
+Default config for NCT6775F and NCT6776F. We don't support these
+yet, but users may install a standalone driver for them later.
+
+--- lm-sensors/etc/sensors.conf.default	(revision 5902)
++++ lm-sensors/etc/sensors.conf.default	(revision 5913)
+@@ -285,7 +285,7 @@
+ #    set in8_max  3.0 * 1.10
+ 
+ 
+-chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*"
++chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*"
+ 
+     label in0 "Vcore"
+     label in2 "AVCC"
diff --git a/lm_sensors-r5914-fix-TMP421-detection.patch b/lm_sensors-r5914-fix-TMP421-detection.patch
new file mode 100644
index 0000000..2511211
--- /dev/null
+++ b/lm_sensors-r5914-fix-TMP421-detection.patch
@@ -0,0 +1,18 @@
+We probe addresses 0x1c-0x1f for other chips now, so we might as well
+look for TMP421 devices there.
+
+---
+ prog/detect/sensors-detect |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- lm_sensors-3.2.0.orig/prog/detect/sensors-detect
++++ lm_sensors-3.2.0/prog/detect/sensors-detect
+@@ -950,7 +950,7 @@ use vars qw(@i2c_adapter_names);
+ 	}, {
+ 		name => "Texas Instruments TMP421",
+ 		driver => "tmp421",
+-		i2c_addrs => [0x2a, 0x4c..0x4f], # 0x1c-0x1f not probed.
++		i2c_addrs => [0x1c..0x1f, 0x2a, 0x4c..0x4f],
+ 		i2c_detect => sub { tmp42x_detect(@_, 0); },
+ 	}, {
+ 		name => "Texas Instruments TMP422",
diff --git a/lm_sensors-r5916-fix-EMC140x-detection.patch b/lm_sensors-r5916-fix-EMC140x-detection.patch
new file mode 100644
index 0000000..ed583c4
--- /dev/null
+++ b/lm_sensors-r5916-fix-EMC140x-detection.patch
@@ -0,0 +1,23 @@
+Fix addresses checked for SMSC EMC1403 and EMC1404.
+
+---
+ prog/detect/sensors-detect |    4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- lm_sensors-3.2.0.orig/prog/detect/sensors-detect
++++ lm_sensors-3.2.0/prog/detect/sensors-detect
+@@ -1182,12 +1182,12 @@ use vars qw(@i2c_adapter_names);
+ 	}, {
+ 		name => "SMSC EMC1403",
+ 		driver => "emc1403",
+-		i2c_addrs => [0x18, 0x2a, 0x4c, 0x4d],
++		i2c_addrs => [0x18, 0x29, 0x4c, 0x4d],
+ 		i2c_detect => sub { emc1403_detect(@_, 0); },
+ 	}, {
+ 		name => "SMSC EMC1404",
+ 		driver => "to-be-written", # emc1403
+-		i2c_addrs => [0x18, 0x2a, 0x4c, 0x4d],
++		i2c_addrs => [0x18, 0x29, 0x4c, 0x4d],
+ 		i2c_detect => sub { emc1403_detect(@_, 1); },
+ 	}, {
+ 		name => "ST STTS424",
diff --git a/lm_sensors-r5930-fix-DDR3-SPD-detection.patch b/lm_sensors-r5930-fix-DDR3-SPD-detection.patch
new file mode 100644
index 0000000..7efa54b
--- /dev/null
+++ b/lm_sensors-r5930-fix-DDR3-SPD-detection.patch
@@ -0,0 +1,61 @@
+Fix detection of SPD EEPROM on DDR3 memory modules. DDR3 uses CRC16 over
+128 bytes instead of basic checksum over 64 bytes. Contributed by
+Clemens Ladisch.
+
+---
+ prog/detect/sensors-detect |   37 +++++++++++++++++++++++++++++++------
+ 1 file changed, 31 insertions(+), 6 deletions(-)
+
+--- lm_sensors-3.2.0.orig/prog/detect/sensors-detect
++++ lm_sensors-3.2.0/prog/detect/sensors-detect
+@@ -5134,19 +5134,44 @@ sub it8712_i2c_detect
+ }
+ 
+ # Registers used:
+-#   0-63: SPD Data and Checksum
++#   0-63: SPD Data and Checksum (up to DDR2)
++#   0-127: SPD data and CRC (DDR3)
+ sub eeprom_detect
+ {
+ 	my ($file, $addr) = @_;
++	my $device_type = i2c_smbus_read_byte_data($file, 2);
+ 	my $checksum = 0;
+ 
+-	# Check the checksum for validity (works for most DIMMs and RIMMs)
+-	for (my $i = 0; $i <= 62; $i++) {
+-		$checksum += i2c_smbus_read_byte_data($file, $i);
++	# Check the checksum or CRC16 for validity
++	if ($device_type >= 1 and $device_type <= 8) {
++		for (my $i = 0; $i < 63; $i++) {
++			$checksum += i2c_smbus_read_byte_data($file, $i);
++		}
++		$checksum &= 0xff;
++
++		return 8 if $checksum == i2c_smbus_read_byte_data($file, 63);
++	} elsif ($device_type >= 9 && $device_type <= 11) {
++		# see JEDEC 21-C 4.1.2.11 2.4
++		my $crc_coverage = i2c_smbus_read_byte_data($file, 0);
++		$crc_coverage = ($crc_coverage & 0x80) ? 117 : 126;
++		for (my $i = 0; $i < $crc_coverage; $i++) {
++			$checksum ^= i2c_smbus_read_byte_data($file, $i) << 8;
++			for (my $bit = 0; $bit < 8; $bit++) {
++				if ($checksum & 0x8000) {
++					$checksum = ($checksum << 1) ^ 0x1021;
++				} else {
++					$checksum <<= 1;
++				}
++			}
++		}
++		$checksum &= 0xffff;
++
++		return 8 if ($checksum & 0xff) == i2c_smbus_read_byte_data($file, 126) and
++			    ($checksum >> 8) == i2c_smbus_read_byte_data($file, 127);
++
++		# note: if bit 7 of byte 32 is set, a jc42 sensor is at $addr-0x38
+ 	}
+-	$checksum &= 255;
+ 
+-	return 8 if $checksum == i2c_smbus_read_byte_data($file, 63);
+ 	return;
+ }
+ 
diff --git a/sensors.changes b/sensors.changes
index aa17418..491fc9d 100644
--- a/sensors.changes
+++ b/sensors.changes
@@ -1,3 +1,27 @@
+-------------------------------------------------------------------
+Thu Feb 17 21:07:45 CET 2011 - jdelvare@suse.de
+
+- lm_sensors-r5930-fix-DDR3-SPD-detection.patch: Fix typo in
+  comparison.
+
+-------------------------------------------------------------------
+Thu Feb 17 10:13:12 CET 2011 - jdelvare@suse.de
+
+- lm_sensors-r5910-detect-new-Nuvoton-superio.patch: Add detection
+  of Nuvoton NCT5571D, NCT5577D and NCT6776F.
+- lm_sensors-r5913-default-config-NCT677xF.patch: Default config
+  for NCT6775F and NCT6776F.
+- lm_sensors-r5914-fix-TMP421-detection.patch: We probe addresses
+  0x1c-0x1f for other chips now, so we might as well look for
+  TMP421 devices there.
+- lm_sensors-r5916-fix-EMC140x-detection.patch: Fix addresses
+  checked for SMSC EMC1403 and EMC1404.
+- lm_sensors-r5930-fix-DDR3-SPD-detection.patch: Fix detection of
+  SPD EEPROM on DDR3 memory modules. DDR3 uses CRC16 over 128 bytes
+  instead of basic checksum over 64 bytes. Contributed by Clemens
+  Ladisch.
+- libensors-visibility.patch: Add 3 missing symbols.
+
 -------------------------------------------------------------------
 Wed Jan 19 11:44:18 CET 2011 - jdelvare@suse.de
 
diff --git a/sensors.spec b/sensors.spec
index 5371117..9b596da 100644
--- a/sensors.spec
+++ b/sensors.spec
@@ -43,6 +43,11 @@ Patch9:         lm_sensors-r5886-default-config-W83627THF.patch
 Patch10:        lm_sensors-r5887-typo-in-sensors-conf-5.patch
 Patch11:        lm_sensors-r5889-default-config-SCH5127.patch
 Patch12:        lm_sensors-r5905-fix-coretemp-detection.patch
+Patch13:        lm_sensors-r5910-detect-new-Nuvoton-superio.patch
+Patch14:        lm_sensors-r5913-default-config-NCT677xF.patch
+Patch15:        lm_sensors-r5914-fix-TMP421-detection.patch
+Patch16:        lm_sensors-r5916-fix-EMC140x-detection.patch
+Patch17:        lm_sensors-r5930-fix-DDR3-SPD-detection.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 ExcludeArch:    s390 s390x
 
@@ -152,6 +157,11 @@ Authors:
 %patch10 -p1
 %patch11 -p1
 %patch12 -p1
+%patch13 -p1
+%patch14 -p1
+%patch15 -p1
+%patch16 -p1
+%patch17 -p1
 
 %build
 RPM_OPT_FLAGS="$RPM_OPT_FLAGS"