sg3_utils/_servicedata

<servicedata>
<service name="tar_scm">
                <param name="url">https://github.com/openSUSE/sg3_utils.git</param>
              <param name="changesrevision">6aa67ed94a6c135d6a462c55b3764732259b162e</param></service><service name="tar_scm">
                <param name="url">https://github.com/doug-gilbert/sg3_utils</param>
              <param name="changesrevision">ed556a52933d29309849dbb24ba49f8b829c1058</param></service><service name="tar_scm">
                <param name="url">https://github.com/openSUSE/sg3_utils</param>
              <param name="changesrevision">d13bc56331c47ca4554afdc8ec718f1f8d3a1e70</param></service></servicedata>
Accepting request 688909 from home:mwilck:branches:Base:System - Spec file: * add fc_wwpn_id (bsc#1005063) * add lun masking service (bsc#954600) * drop BuildRequires on udev * replace unversioned "Provides: scsi" with versioned - Update to version sg3_utils-1.45~803+31.564be3d: * New versioning scheme for upstream pre-release: 1.45 - upstream release target, 803 - upstream svn id, +31: SUSE commits on top of svn, 564be3d - git hash * rescan-scsi-bus.sh: terminate scanning if last lun got removed (bsc#1087008) * 58-scsi-sg3_symlink.rules: don't skip multipath members (bsc#1085212) * Add scsi-enable-target-scan.sh (bsc#954600) - Update to svn r803: * sg_opcodes: expand MLU (18-102r0) * sg_format: add --dcrt used twice (FOV=1 DCRT=0) * rescan-scsi-bus: widen LUN 0 only scanning (bsc#1069384) - Earlier SUSE fixes included in 1.45: * rescan-scsi-bus.sh: use LUN wildcard in idlist (bsc#1069384) [svn: r795] * sg_ses: fixup page decoding (bsc#1077787) [svn: r795] * sg_ses: allow to decode raw data instead of reading from a device (bsc#1050943) [svn: r795] - Update to sg3_utils-1.44 [20180912] [svn: r791] * rescan-scsi-bus.sh: harden code - bump version to 20180615 - add --ignore-rev to ignore revision change * introduce SG3_UTILS_DSENSE environment variable OBS-URL: https://build.opensuse.org/request/show/688909 OBS-URL: https://build.opensuse.org/package/show/Base:System/sg3_utils?expand=0&rev=80 2019-04-18 08:15:41 +02:00			`<servicedata>`
			`<service name="tar_scm">`
			`<param name="url">https://github.com/openSUSE/sg3_utils.git</param>`
- Update to version 1.47: * sg_rep_zones: add support for REPORT ZONE DOMAINS and REPORT REALMS in this utility * sg_raw: fix prints of NVMe NVM command names * sg_logs: additions to Volume statistics lpage [ssc5r05c] - additions to Command duration limits statistics log page [spc6r06] * sg_vpd: fix do_hex type on some recent pages - zoned block dev char vpd: add zone alignment mode and zone starting LBA granularity [zbc2r11] * sg_read_buffer: fix --length= problem * sg_dd, sgm_dd, sgp_dd: don't close negative file descriptors * sg_dd: srand48_r() and mrand48_r() are GNU libc specific, put conditional in so non-reentrant version used otherwise - 'iflag=00,ff' places the 32 bit block address (big endian) into each block * sgp_dd: major rework, fix issue with error being ignored - new: --chkaddr which checks for block address in each block - add check for stdatomic.h presence in configure.ac * sg_xcopy: tweak CSCD identification descriptor * sg_get_elem_status: fix issue with '--maxlen=' option - add 2 depopulation revocation health attributes [sbc5r01] * transport error handling improved. To fix report of a BAD_TARGET transport error but the utility still continued. - introduce SG_LIB_TRANSPORT_ERROR [35] exit status * several utilities: override '--maxlen=LEN' when LEN is < 16 (or 4), take default (or 4) instead * scripts: 55-scsi-sg3_id.rules remove outdated rule (bsc#1189297) * sg_lib: add sg_scsi_status_is_good(), sg_scsi_status_is_bad() and sg_get_zone_type_str() OBS-URL: https://build.opensuse.org/package/show/Base:System/sg3_utils?expand=0&rev=89 2021-11-11 23:44:28 +01:00			`<param name="changesrevision">6aa67ed94a6c135d6a462c55b3764732259b162e</param></service><service name="tar_scm">`
			`<param name="url">https://github.com/doug-gilbert/sg3_utils</param>`
- Update to version 1.47+2.388b767: * rescan-scsi-bus.sh: apply fix for '-r' (boo#1194293) OBS-URL: https://build.opensuse.org/package/show/Base:System/sg3_utils?expand=0&rev=91 2022-01-04 12:48:10 +01:00			`<param name="changesrevision">ed556a52933d29309849dbb24ba49f8b829c1058</param></service><service name="tar_scm">`
			`<param name="url">https://github.com/openSUSE/sg3_utils</param>`
- Update to version 1.47+5.d13bc56: * add timeout parameter (bsc#1199248) OBS-URL: https://build.opensuse.org/package/show/Base:System/sg3_utils?expand=0&rev=96 2022-06-01 16:51:28 +02:00			`<param name="changesrevision">d13bc56331c47ca4554afdc8ec718f1f8d3a1e70</param></service></servicedata>`