sg3_utils/sg3_utils.spec

#
# spec file for package sg3_utils (Version 1.27)
#
# Copyright (c) 2009 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#


Url:            http://sg.torque.net/sg/sg3_utils.html

Name:           sg3_utils
%define sgver 	1.27
License:        BSD 3-Clause; GPL v2 only; GPL v2 or later
Group:          Hardware/Other
Provides:       sg_utils
Provides:       scsi
Obsoletes:      scsi <= 1.7_2.38_1.25_0.19_1.02_0.93
AutoReqProv:    on
PreReq:         %insserv_prereq
Version:        1.27
Release:        19
Summary:        A collection of tools that send SCSI commands to devices
Source:         http://sg.torque.net/sg/p/sg3_utils-%{sgver}.tar.bz2
Source2:        http://www.garloff.de/kurt/linux/rescan-scsi-bus.sh
Patch1:         %{name}.diff
Patch2:         sg3_lib_v1.diff
BuildRoot:      %{_tmppath}/%{name}-%{version}-build

%description
The sg3_utils package contains utilities that send SCSI commands to
devices. As well as devices on transports traditionally associated with
SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI
Parallel Interface(SPI)) many other devices use SCSI command sets.
ATAPI cd/dvd drives and SATA disks that connect via a translation layer
or a bridge device are examples of devices that use SCSI command sets.



Authors:
--------
    Doug Gilbert <dgilbert@interlog.com>
    Kurt Garloff <garloff@suse.de>

%package devel
License:        BSD 3-Clause; GPL v2 or later
Summary:        A collection of tools that send SCSI commands to devices
Group:          Development/Libraries/C and C++
AutoReqProv:    on
Requires:       %name = %version

%description devel
The sg3_utils package contains utilities that send SCSI commands to
devices. As well as devices on transports traditionally associated with
SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI
Parallel Interface(SPI)) many other devices use SCSI command sets.
ATAPI cd/dvd drives and SATA disks that connect via a translation layer
or a bridge device are examples of devices that use SCSI command sets.



Authors:
--------
    Doug Gilbert <dgilbert@interlog.com>
    Kurt Garloff <garloff@suse.de>

%prep
%setup -q
%patch1
%patch2 -p1

%build
autoreconf -fi
export RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS | sed 's/\-O2/-Os/'`
CFLAGS="$RPM_OPT_FLAGS -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" \
PREFIX=%{_prefix} LIBDIR=%{_libdir} CC=gcc \
%configure --disable-static --with-pic
%{__make} %{?jobs:-j%jobs}

%install
make install DESTDIR=$RPM_BUILD_ROOT INSTDIR=$RPM_BUILD_ROOT%{_bindir} \
	MANDIR=$RPM_BUILD_ROOT%{_mandir} LIBDIR=$RPM_BUILD_ROOT%{_libdir} \
	PREFIX=%{_prefix}
install -m 755 scripts/scsi_logging_level $RPM_BUILD_ROOT%{_bindir}
install -m 755 %{S:2} $RPM_BUILD_ROOT%{_bindir}
%{__rm} -f %{buildroot}%{_libdir}/*.la
grep -r -E '^#include[ \t]+[<"][^>"]+[">]' %{buildroot}%{_includedir} | awk -F: '{print $2}'

%post -p /sbin/ldconfig

%postun -p /sbin/ldconfig

%files
%defattr(-,root,root)
%doc README README.sg_start 
%doc ChangeLog CREDITS NEWS
%attr(755,root,root) %{_bindir}/sg_dd
%attr(755,root,root) %{_bindir}/sg_inq
%attr(755,root,root) %{_bindir}/sg_scan
%attr(755,root,root) %{_bindir}/sg_rbuf
%attr(755,root,root) %{_bindir}/sginfo
%attr(755,root,root) %{_bindir}/sg_readcap
%attr(755,root,root) %{_bindir}/sgp_dd
%attr(755,root,root) %{_bindir}/sg_map
%attr(755,root,root) %{_bindir}/sg_turs
%attr(755,root,root) %{_bindir}/sg_test_rwbuf
#%attr(755,root,root) %{_bindir}/scsi_devfs_scan
%attr(755,root,root) %{_bindir}/sgm_dd
%attr(755,root,root) %{_bindir}/sg_read
%attr(755,root,root) %{_bindir}/sg_logs
%attr(755,root,root) %{_bindir}/sg_modes
%attr(755,root,root) %{_bindir}/sg_opcodes
%attr(755,root,root) %{_bindir}/sg_persist
%attr(755,root,root) %{_bindir}/sg_senddiag
%attr(755,root,root) %{_bindir}/sg_reset
%attr(755,root,root) %{_bindir}/sg_emc_trespass
%attr(755,root,root) %{_bindir}/sg_read_long
%attr(755,root,root) %{_bindir}/sg_requests
%attr(755,root,root) %{_bindir}/sg_ses
%attr(755,root,root) %{_bindir}/sg_verify
%attr(755,root,root) %{_bindir}/sg_write_long
%attr(755,root,root) %{_bindir}/sg_luns
%attr(755,root,root) %{_bindir}/sg_prevent
%attr(755,root,root) %{_bindir}/sg_get_config
%attr(755,root,root) %{_bindir}/sg_sync
%attr(755,root,root) %{_bindir}/sg_wr_mode
%attr(755,root,root) %{_bindir}/sg_reassign
%attr(755,root,root) %{_bindir}/sg_rtpg
%attr(755,root,root) %{_bindir}/sg_format
%attr(755,root,root) %{_bindir}/sg_rmsn
%attr(755,root,root) %{_bindir}/sg_start
%attr(755,root,root) %{_bindir}/sg_ident
%attr(755,root,root) %{_bindir}/sg_map26
%attr(755,root,root) %{_bindir}/sg_rdac
%attr(755,root,root) %{_bindir}/sg_vpd
%attr(755,root,root) %{_bindir}/sg_raw
%attr(755,root,root) %{_bindir}/sg_write_buffer
%attr(755,root,root) %{_bindir}/sg_sat_identify
%attr(755,root,root) %{_bindir}/sg_read_buffer
%attr(755,root,root) %{_bindir}/sg_safte
%attr(755,root,root) %{_bindir}/sg_sat_phy_event
%attr(755,root,root) %{_bindir}/sg_sat_set_features
%attr(755,root,root) %{_bindir}/sg_stpg
%attr(755,root,root) %{_bindir}/scsi_logging_level
%attr(755,root,root) %{_bindir}/rescan-scsi-bus.sh
%doc %{_mandir}/man8/sg_dd.8.gz
%doc %{_mandir}/man8/sgp_dd.8.gz
%doc %{_mandir}/man8/sgm_dd.8.gz
%doc %{_mandir}/man8/sg_map.8.gz
%doc %{_mandir}/man8/sg_rbuf.8.gz
%doc %{_mandir}/man8/sg_read.8.gz
%doc %{_mandir}/man8/sg_scan.8.gz
%doc %{_mandir}/man8/sginfo.8.gz
%doc %{_mandir}/man8/sg_readcap.8.gz
%doc %{_mandir}/man8/sg_turs.8.gz
%doc %{_mandir}/man8/sg_inq.8.gz
%doc %{_mandir}/man8/sg_test_rwbuf.8.gz
#%doc %{_mandir}/man8/scsi_devfs_scan.8.gz
%doc %{_mandir}/man8/sg_start.8.gz
%doc %{_mandir}/man8/sg_reset.8.gz
%doc %{_mandir}/man8/sg_modes.8.gz
%doc %{_mandir}/man8/sg_logs.8.gz
%doc %{_mandir}/man8/sg_opcodes.8.gz
%doc %{_mandir}/man8/sg_persist.8.gz
%doc %{_mandir}/man8/sg_senddiag.8.gz
%doc %{_mandir}/man8/sg_emc_trespass.8.gz
%doc %{_mandir}/man8/sg_read_long.8.gz
%doc %{_mandir}/man8/sg_requests.8.gz
%doc %{_mandir}/man8/sg_ses.8.gz
%doc %{_mandir}/man8/sg_verify.8.gz
%doc %{_mandir}/man8/sg_write_long.8.gz
%doc %{_mandir}/man8/sg_luns.8.gz
%doc %{_mandir}/man8/sg_prevent.8.gz
%doc %{_mandir}/man8/sg_get_config.8.gz
%doc %{_mandir}/man8/sg_sync.8.gz
%doc %{_mandir}/man8/sg_wr_mode.8.gz
%doc %{_mandir}/man8/sg_reassign.8.gz
%doc %{_mandir}/man8/sg_rtpg.8.gz
%doc %{_mandir}/man8/sg_format.8.gz
%doc %{_mandir}/man8/sg_rmsn.8.gz
%doc %{_mandir}/man8/sg_ident.8.gz
%doc %{_mandir}/man8/sg_map26.8.gz
%doc %{_mandir}/man8/sg_rdac.8.gz
%doc %{_mandir}/man8/sg_vpd.8.gz
%doc %{_mandir}/man8/sg_raw.8.gz
%doc %{_mandir}/man8/sg_write_buffer.8.gz
%doc %{_mandir}/man8/sg_sat_identify.8.gz
%doc %{_mandir}/man8/sg_read_buffer.8.gz
%doc %{_mandir}/man8/sg_safte.8.gz
%doc %{_mandir}/man8/sg_sat_phy_event.8.gz
%doc %{_mandir}/man8/sg_sat_set_features.8.gz
%doc %{_mandir}/man8/sg_stpg.8.gz
%doc %{_mandir}/man8/sg3_utils.8.gz
%attr(755,root,root) %{_libdir}/libsgutils.so.*

%files devel
%defattr(644,root,root)
%attr(755,root,root) %{_libdir}/libsgutils.so
%attr(755,root,root) %dir %{_prefix}/include/scsi
%{_prefix}/include/scsi/sg_cmds.h
%{_prefix}/include/scsi/sg_cmds_basic.h
%{_prefix}/include/scsi/sg_cmds_extra.h
%{_prefix}/include/scsi/sg_lib.h
%{_prefix}/include/scsi/sg_pt.h
%{_prefix}/include/scsi/sg_io_linux.h
%{_prefix}/include/scsi/sg_linux_inc.h
%{_prefix}/include/scsi/sg_cmds_mmc.h
%{_prefix}/include/scsi/sg_lib_data.h

%clean
test ! -z "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != "/" && rm -rf $RPM_BUILD_ROOT
rm -rf $RPM_BUILD_DIR/sg3_utils-%{sgver}

%changelog
* Fri Apr 17 2009 crrodriguez@suse.de
- remove static libraries and "la" files
* Mon Jan 26 2009 hare@suse.de
- Fixes to rescan-scsi-bus.sh:
  * Implement '--forcerescan' to force a rescan of existing devices
  * Handle LUN changes correctly
  * Check variables before evaluation
* Wed Oct 29 2008 garloff@suse.de
- rescan-scsi-bus.sh 1.29:
  * Fix error in script (returning "" does not work)
  * Support systems without /proc/scsi
- Don't install INSTALL
* Tue Sep 30 2008 hare@suse.de
-  Add %%insserv_prereq (bnc#423204)
* Fri Sep 12 2008 garloff@suse.de
- Update rescan-scsi-bus.sh script to 1.28:
  * Merge fixes from Hannes
  * Minor cleanups
  * Sort hosts numerically
* Tue Aug 12 2008 garloff@suse.de
- Update to sg3_utils-1.27:
  * Adapted to linux-2.6.26 (sg_map26)
  * sg_dd uses flock (rw -- if that fails ro)
  * sg_get_config: OSSC feature (mmc6r02)
- Update to sg3_utils-1.26:
  * Minor fixes and enhancements to
  sg_sat_phy_event, sg_ses, sg_get_config, sg_verify, sg_vpd,
  sg_inq, sg_modes, sg_start, sg_request, sg_luns, sg_dd,
  sg_opcodes, sg_turs.
  * sg_lib: asc/ascq update for spc4r15, osd2r03 service actions,
  sense key specific unit attn queue overflow decoding, ...
  * Restructuring: sg_lib -> sg_lib_data, sg_inq_data, (u)int64_t,
  sg_io_linux -> lib/.
  * Documentation enhancements.
* Wed Jul 16 2008 hare@suse.de
- Use correct length parameter for sg_inq (bnc#363438)
* Fri May 23 2008 hare@suse.de
- Use 'Provides' to clean update dependency
* Fri May 09 2008 schwab@suse.de
- Use autoreconf -i.
* Thu Apr 24 2008 hare@suse.de
- Split off from original scsi package.