pool/sg3_utils
SHA256
2
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
2ebc9cdab0
sg3_utils/sg3_utils.changes
Hannes Reinecke 2ebc9cdab0 Accepting request 315568 from home:morbidrsa:branches:Base:System 
- Update to new upstream release 1.41
  * sg_zone: new utility for open, close and finish
    zone commands introduced in zbc-r02
  * sg_rep_zones and sg_reset_wp: change opcodes as
    indicated in zbc-r02
  * sg_read_buffer: add READ BUFFER(16) support (spc5r02)
  * sg_logs: add --enumerate and acronyms
  * allow decode from hex or binary in file
  * decode environmental reporting + limits lpages
  * sg_write_buffer: add --timeout=TO option
  * sg_lib interface: add sg_lib_pdt_decay(), TPROTO_PCIE
    plus support for zoning service actions
  * sg_lib: in Linux blocked devices yield ENXIO from
    ioctl(SG_IO), map to SG_LIB_CAT_NOT_READY
  * clean up sg_warnings_stream handling
  * sg_inq+sg_vpd: fix SCSI name string decoding in
    device identification VPD page (0x83)
  * increase sanity on Unit Serial number VPD page
  * improve rdac vpd page reporting (vendor)
  * sg_inq: improve NAA handling in dev_id VPD page
  * update version descriptor list to 20150126

OBS-URL: https://build.opensuse.org/request/show/315568
OBS-URL: https://build.opensuse.org/package/show/Base:System/sg3_utils?expand=0&rev=51
2015-07-08 11:00:19 +00:00

540 lines
22 KiB
Plaintext
Raw Blame History

-------------------------------------------------------------------
Wed Jul 8 07:35:53 UTC 2015 - jthumshirn@suse.com
- Update to new upstream release 1.41
* sg_zone: new utility for open, close and finish
zone commands introduced in zbc-r02
* sg_rep_zones and sg_reset_wp: change opcodes as
indicated in zbc-r02
* sg_read_buffer: add READ BUFFER(16) support (spc5r02)
* sg_logs: add --enumerate and acronyms
* allow decode from hex or binary in file
* decode environmental reporting + limits lpages
* sg_write_buffer: add --timeout=TO option
* sg_lib interface: add sg_lib_pdt_decay(), TPROTO_PCIE
plus support for zoning service actions
* sg_lib: in Linux blocked devices yield ENXIO from
ioctl(SG_IO), map to SG_LIB_CAT_NOT_READY
* clean up sg_warnings_stream handling
* sg_inq+sg_vpd: fix SCSI name string decoding in
device identification VPD page (0x83)
* increase sanity on Unit Serial number VPD page
* improve rdac vpd page reporting (vendor)
* sg_inq: improve NAA handling in dev_id VPD page
* update version descriptor list to 20150126
-------------------------------------------------------------------
Fri Feb 13 14:22:36 UTC 2015 - jengelh@inai.de
- Update to ne wupstream release 1.40
* New utilities: sg_write_verify (for WRITE AND VERIFY),
sg_ses_microcode, sg_sat_read_gplog.
* sg_senddiag gained the --maxlen= and --page=PG options
* sg_opcodes gained the --compact field
* sg_inq: expand Block limits VPD page output
- Drop sg3_utils-fix-missing-rule-for-scsi_serial-partitions.patch,
sg3_utils-Fixup-formatting-of-invalid-VPD-page-0x83.patch,
sg3_utils-Do-not-export-long-identifiers.patch
(merged upstream)
- Replace symbol version hack (it forced lockstep updates) by
sgut-libversioning.diff (allows parallel installation).
-------------------------------------------------------------------
Sun Jan 4 13:55:32 UTC 2015 - lnussel@suse.de
- blacklist some usb controllers that don't like sg_inq (bnc#840054)
Add: sg3_utils-sg_inq-blacklist.diff
-------------------------------------------------------------------
Wed Sep 3 15:57:47 CEST 2014 - hare@suse.de
- Fixup formatting of invalid VPD pages (bnc#884779)
Add: sg3_utils-Fixup-formatting-of-invalid-VPD-page-0x83.patch
- sg_inq: Do not export long identifiers (bnc#884779)
Add: sg3_utils-Do-not-export-long-identifiers.patch
-------------------------------------------------------------------
Wed Jun 25 07:53:48 UTC 2014 - rmilasan@suse.com
- Fix missing rule for generating links for partitions also (bnc#883032)
Add:
sg3_utils-fix-missing-rule-for-scsi_serial-partitions.patch
-------------------------------------------------------------------
Fri Jun 20 13:15:12 UTC 2014 - jengelh@inai.de
- Add symbol versions to library
-------------------------------------------------------------------
Tue Jun 17 09:08:42 UTC 2014 - jengelh@inai.de
- Update to new upstream release 1.39
* This release adds some ZBC support in the form of sg_rep_zones
and sg_reset_wp.
* It tracks changes made by www.t10.org since April 2014.
- Remove
0001-Split-59-scsi-sg_utils.rules-for-multipath-support.patch,
0003-sg_inq-compability-links-for-ata_id.patch,
0004-sg_inq-suppress-warning-messages-for-export.patch,
sginfo-inq-fields-strip-blank.patch (merged upstream).
-------------------------------------------------------------------
Thu May 15 13:34:33 CEST 2014 - hare@suse.de
- Create compability links for ATA devices (bnc#876344)
Add:
0003-sg_inq-compability-links-for-ata_id.patch
- Suppress warnings for sg_inq --export (bnc#876454)
Add:
0004-sg_inq-suppress-warning-messages-for-export.patch
-------------------------------------------------------------------
Tue Apr 15 16:03:37 UTC 2014 - spargaonkar@suse.com
- added patch sginfo-inq-fields-strip-blank.patch
sg3_utils: Strip out trailing info from vendor info products fields in inq
bnc#863357
- added patches:
* sginfo-inq-fields-strip-blank.patch
-------------------------------------------------------------------
Fri Apr 11 12:12:47 CEST 2014 - hare@suse.de
- Split off 59-scsi-sg_utils.rules to properly support
multipathing (bnc#873151)
Remove:
0001-59-scsi-sg_utils.rules-skip-symlinks-for-multipath-d.patch
Add:
0001-Split-59-scsi-sg_utils.rules-for-multipath-support.patch
-------------------------------------------------------------------
Thu Apr 10 11:22:07 CEST 2014 - hare@suse.de
- Update to official release 1.38
* Update documentation
* Update to latest SPC
* Minor fixes
* Add: sg3_utils-1.38.tar.xz
* Remove: sg3_utils-1.38b7r538.tar.xz
* Remove: sg3_utils-1.38r546.patch
* Remove: sg3_utils-1.38b12r556.patch
- Use 59-scsi-sg3_utils from the rpm
Remove: 59-scsi-sg3_utils.rules
- Fixup 59-scsi-sg3_utils.rules to not provide symlinks
on multipath device paths (bnc#872929)
Add: 0001-59-scsi-sg_utils.rules-skip-symlinks-for-multipath-d.patch
-------------------------------------------------------------------
Fri Mar 7 11:44:33 CET 2014 - hare@suse.de
- Fixup 59-scsi_sg3_utils.rules to provide compability links
for ata_id (bnc#866933)
-------------------------------------------------------------------
Fri Feb 28 15:15:32 CET 2014 - hare@suse.de
- Add 59-scsi-sg3_utils.rules (bnc#865494)
-------------------------------------------------------------------
Tue Feb 25 11:26:24 CET 2014 - hare@suse.de
- Update to inofficial release 1.38b12r556 (bnc#865494)
* Add --inhex parameter to sg_inq
* sg_inq: decode ASCII information vpd page
* sg_inq: allow page=-1 to force std INQUIRY decoding
* sg_inq: improve unit serial number display
* sg_vpd: Add LTO and DDS vendor pages
* sg_persist: add SOP transport ID
* sg_lib_data: sync asc/ascq code with T10
* rescan-scsi-bus.sh: check if FC driver exports issue_lip
* Add man page for rescan-scsi-bus.sh
- Remove sg3_utils-check-if-hba-supports-issue-lip.patch,
has been merged with upstream
-------------------------------------------------------------------
Thu Jan 23 08:57:56 CET 2014 - hare@suse.de
- Update to inofficial release 1.38r546 (bnc#831778)
* sg_ses: error and warning message cleanup
- fix --data=- problem with large buffers
- new --data=@FN to read hex data from file FN
- add --maxlen= option
* sg_inq:
- add LU_CONG to standard inquiry response
- sync version descriptors dated 20131126
- fix overflow in encode_whitespaces
* sg_vpd: add LU_CONG to standard inquiry response output
- decode Third Party Copy (tpc) page
* sg_persist: add PROUT: Replace Lost Reservation (spc4r36)
* sg_readcap: for --16 show physical block size if
* sg_xcopy:
- environment variables: XCOPY_TO_SRC and
XCOPY_TO_DST indicate where xcopy command is sent
- change default to send xcopy to dst (was src)
- improve CL handling of short options (e.g. '-vv')
* sg_write_same: repeat if unit attention
* sg_rtpg: fix indexing bug with --extended option
* sg_lib_data: sync asc/ascq codes with T10 dated 20131110
* sg_cmds_extra: fix sa bug in sg_ll_3party_copy_out()
- Update tarball to 1.38b7r537
- Add sg3_utils-1.38r546.patch
-------------------------------------------------------------------
Mon Nov 4 01:59:38 UTC 2013 - jengelh@inai.de
- Update to new upstream release 1.37
* sg_compare_and_write: add --quiet option to suppress miscompare
report
* sg_persist: fix core dump on -Q option
* sg_unmap: fix core dump on -g option
* sg_ses: add --nickname and --nickid options
- Remove sg3_utils-Fixup-T10-Vendor-designator-display.patch
(merged upstream)
-------------------------------------------------------------------
Sun Aug 25 18:45:14 CEST 2013 - ohering@suse.de
- Fixup T10 Vendor designator display (bnc#805059)
sg3_utils-Fixup-T10-Vendor-designator-display.patch
- In rescan-scsi-bus.sh, check if the HBA driver exports issue_lip
in sysfs before using it (bnc#780946)
sg3_utils-check-if-hba-supports-issue-lip.patch
-------------------------------------------------------------------
Thu Jun 13 14:15:26 UTC 2013 - jengelh@inai.de
- Implement shlib packaging guidelines; rename sg3_utils-devel
to libsgutils-devel (upstream recommendation)
- More robust make install call; remove redundant %clean section;
simplify file lists
-------------------------------------------------------------------
Tue Jun 11 08:56:39 UTC 2013 - rmilasan@suse.com
- Update to version 1.36
- sg_vpd: Protocol-specific port information VPD page
for SAS SSP, persistent connection (spl3r2), power
disable (spl3r3)
- block device characteristics: add FUAB bit
- sg_xcopy: handle more descriptor types; handle zero
maximum segment length; allow list IDs to be disabled;
improve skip/seek handling; allow xcopy on destination
- sg_reset: and --no-esc option to stop reset escalation
- clean up cli, add long option names
- sg_luns: add --test=ALUN option for decoding LUNs
- decoded luns output in decimal or hex (if -HH given)
- add '--linux' option to show Linux LUN after T10
representation, can map one to the other
- sg_inq: add --vendor option to show standard inquiry's
vendor specific fields in ASCII
- take resid into account with response output
- sg_sync: add --16 (for 16 byte command) and --timeout=
- sg_logs: add data compression page (ssc4)
- sg_sat_set_features: increase --lba from 1 to 4 bytes
- sg_write_same: add --ndob option (sbc3r35d)
- sg_map: mark as deprecated
- sginfo: mark as deprecated, especially -l (list)
- sg_lib: improve snprintf handling
- sg_lib_data: sync asc/ascq codes with T10 20130117
- sg_cmds (lib): if noisy given, give more UA info
- make code more C++ friendly
-------------------------------------------------------------------
Tue Mar 12 09:13:45 CET 2013 - hare@suse.de
- Update to version 1.35
- sg_compare_and_write: new utility
- sg_inq+sg_vpd: block device characteristics VPD page:
add product_type, WABEREQ, WACEREQ and VBULS fields
- sg_inq: more --export option changes for udev
- sg_vpd: add more rdac vendor specific vpd pages
- sg_verify: add --ebytchk option for sbc3r34 changes
- sg_stpg: --offline option: fix 'Invalid state 0xe'
- sg_ses: Door Lock element changed to Door element and
abbreviation changed from 'dl' to 'do' (ses3r05)
- archive/rescan-scsi-bus.sh: upgrade to version 1.53hr
- move rescan-scsi-bus.sh to scripts directory
- sync to sbc3r34
- sg_lib: sg_ll_verify10+16 expand BYTCHK to 2 bit field
- sg_pt_win32, sg_scan(win32): changes for cygwin 1.7.17
- clean up man page summary lines
- sg_xcopy: new dd like utility for extended copy command
- sg_copy_results: new utility for receive copy results
- sg_verify: add 16 byte cdb, bytchk (data-out buffer)
and group number support
- sync to spc4r36 and sbc3r32
- sg_inq: add --export so sg_inq can replace udev's scsi_id
- decode old EMC Symmetrix abuse of VPD page 0x83
- sg_vpd: decode old EMC Symmetrix abuse of VPD page 0x83
- sg_ses: increase max dpage response size to 64 KB
- allow ident,locate on enclosure controller
- more sanity for additional element status descriptor
- sg_sanitize: add --ause, --fail and --test=
- sg_luns: add long extended flat space addressing format
- sg_logs: add ATA pass-through results lpage (SAT-2)
- sg_rtpg: add --extended option
- sg_senddiag: list rebuild assist diag page name
- sg_pt_linux: expand DID_ (host_byte) codes
- cope with a transport error plus sense data
- prefer major() over MAJOR() macro
- sg_lib: fix sg_get_command_name() service actions
- report sdat_ovfl bit (if set) in sense data
- decode extended_copy and receive_copy service actions
- decode read_buffer and write_buffer modes
- decode ATA PT fixed format sense (SAT-2)
- sg_cmds_extra: add sg_ll_report_tgt_prt_grp2()
- ./configure options:
- change --enable-no-linux-bsg to --disable-linuxbsg
- add --disable-scsistrings to reduce utility sizes
-------------------------------------------------------------------
Wed Jul 4 07:01:46 UTC 2012 - cfarrell@suse.com
- license update: GPL-2.0+ and BSD-3-Clause
Show aggregation and make compatible with Fedora declaration
-------------------------------------------------------------------
Sun Apr 22 11:50:44 UTC 2012 - puzel@suse.com
- Update to version 1.33
- sg_ses: major rework of indexes (again), now two level
- sg_write_buffer: new --specific option for mode specific
field; new mode 13 (spc4r32)
- sg_vpd: add hp3par volume info vendor VPD page
- fix 'scsi ports' [0x88] page problem
- add 'sinq' pseudo page for standard inquiry response
- add power consumption page
- sg_format: add --poll= option for request sense polling
- improve handling of disks > 2 TB and DIF (protection)
- sg_logs: LB provision lpage extra (sbc3r28)
- sg_modes: application tag mpage subcode 0xf0->0x2
- sg_write_same: no prot fields when wrprotect=0
- sg_get_lba_status: reflect change in sbc3r25 to Parameter
Data Length response field (offset reduced from 8 to 4)
- sg_inq, sg_vpd: sync with spc4r33
- win32: change DataBufferOffset type per MSDN; caused
problem with 64 bit machines (with buffered interface)
- sg_luns: tweak documentation for vendor specific reports
- add man pages for scsi_loging_level, scsi_mandat,
scsi_satl and scsi_temperature
-------------------------------------------------------------------
Mon Jan 16 19:59:42 UTC 2012 - tabraham@novell.com
- Update to version 1.32
+ sg_sanitize: new utility for command added in sb3r27
+ sg_sat_identify: add '--ident' to output WWN
+ sg_ses: major rework of descriptor output
+ add --index, --descriptor, --join, --clear, --get, and --set
options
+ sg_raw: exit status corrections
+ sg_decode_sense: add --nospace and --hex options
+ sg_logs: fix bug with large --maxlen
+ zero response length when resid implies it is invalid
+ add scope field to lb provisioning lpage (sb3r27)
+ sg_inq: sync version descriptors with spc4r31
+ sb_lib_data: sync asc/ascq codes with spc4r31
+ sg_vpd: add LBPRZ field in LP provisioning VPD page
+ sg_format: allow format of pdt 7 (some MO drives)
+ sg_cmd_basic: sg_cmds_process_resp() handle status good
with a sense key other than no_sense (e.g. completed)
+ add README.iscsi
- Updated rescan-scsi-bus.sh to v1.56
-------------------------------------------------------------------
Thu Mar 10 08:47:43 UTC 2011 - coolo@novell.com
- fix file list
-------------------------------------------------------------------
Fri Feb 18 16:41:32 CET 2011 - hare@suse.de
- Update to version 1.31:
+ sg_decode_sense: new utility to decode sense data
+ sg_vpd: LB provisioning + Block limits pages (sbc3r26)
+ sync asc/ascq and version descriptors with spc4r28
+ sg_get_config, sg_rmsn, sg_verify: add --readonly option
+ sg_lib: implement forwarded sense data descriptor
- decode user data segment referral sense data descriptor
+ sg_lib, sg_turs, sg_format: more precision for progress
indication (two places after decimal point)
+ sg_lib(win32): add runtime selection of SPT direct or
indirect interface
- sg_read_buffer+sg_write_buffer: set SPT direct
+ add examples/forwarded_sense.txt + examples/ref_sense.txt
- Changes from version 1.30:
+ sg_referrals: new utility for REPORT REFERRALS
+ sbc3r25 renames 'thin' provisioning' to 'logical block
provisioning': changes in sg_format, sg_inq, sg_logs,
sg_modes, sg_readcap, sg_vpd
+ sg_inq: update version descriptor list to spc4r27
- extended inquiry vpd page add extended self test
completion minutes field
+ sg_lib: sync asc/ascq list to spc4r27
- dStrHex(): trim excess trailing spaces
+ sg_read_long: add --readonly option (open() is rw)
+ sg_raw: add --readonly option (open() is rw)
- allow bidirectional commands
+ sg_vpd: rdac vendor page [0xc8] parse corrections
- extended inquiry vpd page add extended self test
-completion minutes field
+ sg_ses: expand --data (in) buffer to 2048 bytes
+ sg_opcodes: add extended parameter data for TMFs (spc4r26)
+ sg_dd: clean count calculation, document nocache flag
- treat bsg devices as implicit sg_io
+ sg_write_same: if READ CAPACITY(16) fails try 10 byte variant
- anticipate approval of proposal to allow UNMAP and ANCHOR
bits to be set on WRITE SAME(10) with '--10' option
+ sg3_utils man page: sections added for OS device names
-------------------------------------------------------------------
Fri Aug 13 11:42:50 CEST 2010 - dimstar@opensuse.org
- Update to version 1.29:
+ sg_rtpg: new logical block dependent state and bit (spc4r23)
+ sg_start: add '--readonly' option for ATA disks
+ sg_lib: update asc/ascq list to spc4r23
+ sg_inq: update version descriptor list to spc4r23
+ sg_vpd: block device characteristics page: fix form factor
- update Extended Inquiry VPD page to spc4r23
- update Block Limits VPD page to sbc3r22
- update Thin Provisioning VPD page to sbc3r22
- Automation device serial number and Data transfer device
element VPD pages (ssc4r01)
- add Referrals VPD page (sbc3r22)
+ sg_logs: add thin provisioning and solid state media log pages
- addition of IBM LTO specific log pages
+ sg_modes: new page names from ssc4r01
+ sg_ses: sync with ses3r02 (SAS-2.1 connector types)
+ sg_unmap: add '--anchor' option (sbc3r22)
+ sg_write_same: add '--anchor' option (sbc3r22)
+ sg_pt interface: add set_scsi_pt_flags() to permit passing
through SCSI_PT_FLAGS_QUEUE_AT_TAIL and AT_HEAD flags
+ add examples/sg_queue_tst+bsg_queue_tst for SG_FLAG_Q_AT_TAIL
+ add AM_MAINTAINER_MODE to configure.ac to lessen build issues
+ add BSD_LICENSE file to this and lib directories, refer to
it from source and header files. Some source has GPL license
- Changes from version 1.28:
+ sg_unmap: new utility for thin provisioning
- add examples/sg_unmap_example.txt
+ sg_get_lba_status: new utility for thin provisioning
+ sg_read_block_limits: new utility for tape drives
+ sg_logs: add cache memory statistics log (sub)page
+ sg_vpd, sg_inq: extend Block limits VPD page (sbc3r19)
+ sg_vpd: add Thin provisioning VPD page (sbc3r20) and
TapeAlert supported flags VPD page
+ sg_inq: note VPD page support better in sg_vpd
+ sg_persist: add transport specific transportID format
- allow transportIDs to be read from named file
+ sg_opcodes: allow --opcode= option to take OP and SA
values (comma seperated)
- tweak print format, remove test code
+ sg_requests: remove test code in progress calculation
+ sg_reset: add target reset option
+ sg_luns: reduce default maxlen to 8192 (for FreeBSD)
+ sg_raw: extend max cdb length from 16 to 256 bytes
- align heap allocs to page boundaries
+ sg_lib: sg_set_binary_mode() needs config.h included
- add progress indication sense data descriptor (0xa)
- change SG3_UTILS_* constants to SG_LIB_*
- decode service actions within persistent reserve in/out
- sync with spc4r21
+ sg_cmds_extra: add sg_ll_unmap() and sg_ll_get_lba_status()
+ sg_pt_linux: fix check condition but empty sense buffer;
- major() macro grief, if present include <linux/kdev_t.h> and
use MAJOR() instead
+ scripts/sas_disk_blink: moved from this package to sdparm
+ utils/hxascdmp: in Windows set binary mode on read files
+ examples/sg_persist_tst.sh: add PRIN read full status command
+ sg_raw,sg_write_buffer,sg_write_long,sg_write_same: in Windows
set binary mode on read files
+ sg_pt_win32: default to non-direct variant of SPT interface
- use './configure --enable-win32-spt-direct' to override
- non-direct data length set to 16 KB, extended if required
+ debian: incorporate patch from debian sid
-------------------------------------------------------------------
Mon Jun 28 06:38:35 UTC 2010 - jengelh@medozas.de
- use %_smp_mflags
-------------------------------------------------------------------
Tue Jul 21 14:00:16 CEST 2009 - hare@suse.de
- Clean up spec file and remove obsolete cruft
-------------------------------------------------------------------
Fri Apr 17 20:15:58 CEST 2009 - crrodriguez@suse.de
- remove static libraries and "la" files
-------------------------------------------------------------------
Mon Jan 26 15:30:31 CET 2009 - hare@suse.de
- Fixes to rescan-scsi-bus.sh:
* Implement '--forcerescan' to force a rescan of existing devices
* Handle LUN changes correctly
* Check variables before evaluation
-------------------------------------------------------------------
Wed Oct 29 11:05:47 CET 2008 - garloff@suse.de
- rescan-scsi-bus.sh 1.29:
* Fix error in script (returning "" does not work)
* Support systems without /proc/scsi
- Don't install INSTALL
-------------------------------------------------------------------
Tue Sep 30 14:11:15 CEST 2008 - hare@suse.de
- Add %insserv_prereq (bnc#423204)
-------------------------------------------------------------------
Fri Sep 12 20:29:08 CEST 2008 - garloff@suse.de
- Update rescan-scsi-bus.sh script to 1.28:
* Merge fixes from Hannes
* Minor cleanups
* Sort hosts numerically
-------------------------------------------------------------------
Tue Aug 12 18:25:43 CEST 2008 - garloff@suse.de
- Update to sg3_utils-1.27:
* Adapted to linux-2.6.26 (sg_map26)
* sg_dd uses flock (rw -- if that fails ro)
* sg_get_config: OSSC feature (mmc6r02)
- Update to sg3_utils-1.26:
* Minor fixes and enhancements to
sg_sat_phy_event, sg_ses, sg_get_config, sg_verify, sg_vpd,
sg_inq, sg_modes, sg_start, sg_request, sg_luns, sg_dd,
sg_opcodes, sg_turs.
* sg_lib: asc/ascq update for spc4r15, osd2r03 service actions,
sense key specific unit attn queue overflow decoding, ...
* Restructuring: sg_lib -> sg_lib_data, sg_inq_data, (u)int64_t,
sg_io_linux -> lib/.
* Documentation enhancements.
-------------------------------------------------------------------
Wed Jul 16 09:55:33 CEST 2008 - hare@suse.de
- Use correct length parameter for sg_inq (bnc#363438)
-------------------------------------------------------------------
Fri May 23 10:22:31 CEST 2008 - hare@suse.de
- Use 'Provides' to clean update dependency
-------------------------------------------------------------------
Fri May 9 17:31:33 CEST 2008 - schwab@suse.de
- Use autoreconf -i.
-------------------------------------------------------------------
Thu Apr 24 14:14:14 CEST 2008 - hare@suse.de
- Split off from original scsi package.
Reference in New Issue View Git Blame Copy Permalink