Marcus Meissner
38c1d511fe
- Update to version 1.36 - sg_vpd: Protocol-specific port information VPD page for SAS SSP, persistent connection (spl3r2), power disable (spl3r3) - block device characteristics: add FUAB bit - sg_xcopy: handle more descriptor types; handle zero maximum segment length; allow list IDs to be disabled; improve skip/seek handling; allow xcopy on destination - sg_reset: and --no-esc option to stop reset escalation - clean up cli, add long option names - sg_luns: add --test=ALUN option for decoding LUNs - decoded luns output in decimal or hex (if -HH given) - add '--linux' option to show Linux LUN after T10 representation, can map one to the other - sg_inq: add --vendor option to show standard inquiry's vendor specific fields in ASCII - take resid into account with response output - sg_sync: add --16 (for 16 byte command) and --timeout= - sg_logs: add data compression page (ssc4) - sg_sat_set_features: increase --lba from 1 to 4 bytes - sg_write_same: add --ndob option (sbc3r35d) - sg_map: mark as deprecated - sginfo: mark as deprecated, especially -l (list) - sg_lib: improve snprintf handling - sg_lib_data: sync asc/ascq codes with T10 20130117 - sg_cmds (lib): if noisy given, give more UA info - make code more C++ friendly OBS-URL: https://build.opensuse.org/request/show/178508 OBS-URL: https://build.opensuse.org/package/show/Base:System/sg3_utils?expand=0&rev=25
118 lines
4.0 KiB
RPMSpec
118 lines
4.0 KiB
RPMSpec
#
|
|
# spec file for package sg3_utils
|
|
#
|
|
# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany.
|
|
#
|
|
# All modifications and additions to the file contributed by third parties
|
|
# remain the property of their copyright owners, unless otherwise agreed
|
|
# upon. The license for this file, and modifications and additions to the
|
|
# file, is the same license as for the pristine package itself (unless the
|
|
# license for the pristine package is not an Open Source License, in which
|
|
# case the license is the MIT License). An "Open Source License" is a
|
|
# license that conforms to the Open Source Definition (Version 1.9)
|
|
# published by the Open Source Initiative.
|
|
|
|
# Please submit bugfixes or comments via http://bugs.opensuse.org/
|
|
#
|
|
|
|
|
|
Url: http://sg.danny.cz/sg/sg3_utils.html
|
|
|
|
Name: sg3_utils
|
|
Version: 1.36
|
|
Release: 0
|
|
Summary: A collection of tools that send SCSI commands to devices
|
|
License: GPL-2.0+ and BSD-3-Clause
|
|
Group: Hardware/Other
|
|
Source: http://sg.danny.cz/sg/p/sg3_utils-%{version}.tar.xz
|
|
BuildRequires: xz
|
|
Requires(pre): %insserv_prereq
|
|
Provides: scsi
|
|
Provides: sg_utils
|
|
Obsoletes: scsi <= 1.7_2.38_1.25_0.19_1.02_0.93
|
|
BuildRoot: %{_tmppath}/%{name}-%{version}-build
|
|
|
|
%description
|
|
The sg3_utils package contains utilities that send SCSI commands to
|
|
devices. As well as devices on transports traditionally associated with
|
|
SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI
|
|
Parallel Interface(SPI)) many other devices use SCSI command sets.
|
|
ATAPI cd/dvd drives and SATA disks that connect via a translation layer
|
|
or a bridge device are examples of devices that use SCSI command sets.
|
|
|
|
%package devel
|
|
Summary: A collection of tools that send SCSI commands to devices
|
|
Group: Development/Libraries/C and C++
|
|
Requires: %{name} = %{version}
|
|
|
|
%description devel
|
|
The sg3_utils package contains utilities that send SCSI commands to
|
|
devices. As well as devices on transports traditionally associated with
|
|
SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI
|
|
Parallel Interface(SPI)) many other devices use SCSI command sets.
|
|
ATAPI cd/dvd drives and SATA disks that connect via a translation layer
|
|
or a bridge device are examples of devices that use SCSI command sets.
|
|
|
|
%prep
|
|
%setup -q
|
|
|
|
%build
|
|
%configure --disable-static --with-pic
|
|
%{__make} %{?_smp_mflags}
|
|
|
|
%install
|
|
%makeinstall
|
|
install -m 755 scripts/scsi_logging_level $RPM_BUILD_ROOT%{_bindir}
|
|
install -m 755 scripts/rescan-scsi-bus.sh $RPM_BUILD_ROOT%{_bindir}
|
|
%{__rm} -f %{buildroot}%{_libdir}/*.la
|
|
|
|
%post -p /sbin/ldconfig
|
|
|
|
%postun -p /sbin/ldconfig
|
|
|
|
%files
|
|
%defattr(-,root,root)
|
|
%doc README README.sg_start
|
|
%doc ChangeLog CREDITS NEWS
|
|
%attr(755,root,root) %{_bindir}/sg_*
|
|
%attr(755,root,root) %{_bindir}/scsi_*
|
|
%attr(755,root,root) %{_bindir}/sginfo
|
|
%attr(755,root,root) %{_bindir}/sgp_dd
|
|
%attr(755,root,root) %{_bindir}/sgm_dd
|
|
%attr(755,root,root) %{_bindir}/scsi_logging_level
|
|
%attr(755,root,root) %{_bindir}/rescan-scsi-bus.sh
|
|
%doc %{_mandir}/man8/sg_*.8.gz
|
|
%doc %{_mandir}/man8/sgp_dd.8.gz
|
|
%doc %{_mandir}/man8/sgm_dd.8.gz
|
|
%doc %{_mandir}/man8/sginfo.8.gz
|
|
%doc %{_mandir}/man8/sg3_utils.8.gz
|
|
%doc %{_mandir}/man8/scsi_readcap.8.gz
|
|
%doc %{_mandir}/man8/scsi_ready.8.gz
|
|
%doc %{_mandir}/man8/scsi_start.8.gz
|
|
%doc %{_mandir}/man8/scsi_stop.8.gz
|
|
%doc %{_mandir}/man8/scsi_logging_level.8.gz
|
|
%doc %{_mandir}/man8/scsi_mandat.8.gz
|
|
%doc %{_mandir}/man8/scsi_satl.8.gz
|
|
%doc %{_mandir}/man8/scsi_temperature.8.gz
|
|
%attr(755,root,root) %{_libdir}/libsgutils2.so.*
|
|
|
|
%files devel
|
|
%defattr(644,root,root)
|
|
%attr(755,root,root) %{_libdir}/libsgutils2.so
|
|
%attr(755,root,root) %dir %{_prefix}/include/scsi
|
|
%{_includedir}/scsi/sg_cmds.h
|
|
%{_includedir}/scsi/sg_cmds_basic.h
|
|
%{_includedir}/scsi/sg_cmds_extra.h
|
|
%{_includedir}/scsi/sg_lib.h
|
|
%{_includedir}/scsi/sg_pt.h
|
|
%{_includedir}/scsi/sg_io_linux.h
|
|
%{_includedir}/scsi/sg_linux_inc.h
|
|
%{_includedir}/scsi/sg_cmds_mmc.h
|
|
%{_includedir}/scsi/sg_lib_data.h
|
|
|
|
%clean
|
|
test ! -z "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != "/" && rm -rf $RPM_BUILD_ROOT
|
|
rm -rf $RPM_BUILD_DIR/sg3_utils-%{version}
|
|
|
|
%changelog
|