pool/sg3_utils
SHA256
2
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
6fefb36d70
sg3_utils/sg3_utils.changes

196 lines
8.1 KiB
Plaintext
Raw Blame History

-------------------------------------------------------------------
Thu Mar 10 08:47:43 UTC 2011 - coolo@novell.com
- fix file list
-------------------------------------------------------------------
Fri Feb 18 16:41:32 CET 2011 - hare@suse.de
- Update to version 1.31:
+ sg_decode_sense: new utility to decode sense data
+ sg_vpd: LB provisioning + Block limits pages (sbc3r26)
+ sync asc/ascq and version descriptors with spc4r28
+ sg_get_config, sg_rmsn, sg_verify: add --readonly option
+ sg_lib: implement forwarded sense data descriptor
- decode user data segment referral sense data descriptor
+ sg_lib, sg_turs, sg_format: more precision for progress
indication (two places after decimal point)
+ sg_lib(win32): add runtime selection of SPT direct or
indirect interface
- sg_read_buffer+sg_write_buffer: set SPT direct
+ add examples/forwarded_sense.txt + examples/ref_sense.txt
- Changes from version 1.30:
+ sg_referrals: new utility for REPORT REFERRALS
+ sbc3r25 renames 'thin' provisioning' to 'logical block
provisioning': changes in sg_format, sg_inq, sg_logs,
sg_modes, sg_readcap, sg_vpd
+ sg_inq: update version descriptor list to spc4r27
- extended inquiry vpd page add extended self test
completion minutes field
+ sg_lib: sync asc/ascq list to spc4r27
- dStrHex(): trim excess trailing spaces
+ sg_read_long: add --readonly option (open() is rw)
+ sg_raw: add --readonly option (open() is rw)
- allow bidirectional commands
+ sg_vpd: rdac vendor page [0xc8] parse corrections
- extended inquiry vpd page add extended self test
-completion minutes field
+ sg_ses: expand --data (in) buffer to 2048 bytes
+ sg_opcodes: add extended parameter data for TMFs (spc4r26)
+ sg_dd: clean count calculation, document nocache flag
- treat bsg devices as implicit sg_io
+ sg_write_same: if READ CAPACITY(16) fails try 10 byte variant
- anticipate approval of proposal to allow UNMAP and ANCHOR
bits to be set on WRITE SAME(10) with '--10' option
+ sg3_utils man page: sections added for OS device names
-------------------------------------------------------------------
Fri Aug 13 11:42:50 CEST 2010 - dimstar@opensuse.org
- Update to version 1.29:
+ sg_rtpg: new logical block dependent state and bit (spc4r23)
+ sg_start: add '--readonly' option for ATA disks
+ sg_lib: update asc/ascq list to spc4r23
+ sg_inq: update version descriptor list to spc4r23
+ sg_vpd: block device characteristics page: fix form factor
- update Extended Inquiry VPD page to spc4r23
- update Block Limits VPD page to sbc3r22
- update Thin Provisioning VPD page to sbc3r22
- Automation device serial number and Data transfer device
element VPD pages (ssc4r01)
- add Referrals VPD page (sbc3r22)
+ sg_logs: add thin provisioning and solid state media log pages
- addition of IBM LTO specific log pages
+ sg_modes: new page names from ssc4r01
+ sg_ses: sync with ses3r02 (SAS-2.1 connector types)
+ sg_unmap: add '--anchor' option (sbc3r22)
+ sg_write_same: add '--anchor' option (sbc3r22)
+ sg_pt interface: add set_scsi_pt_flags() to permit passing
through SCSI_PT_FLAGS_QUEUE_AT_TAIL and AT_HEAD flags
+ add examples/sg_queue_tst+bsg_queue_tst for SG_FLAG_Q_AT_TAIL
+ add AM_MAINTAINER_MODE to configure.ac to lessen build issues
+ add BSD_LICENSE file to this and lib directories, refer to
it from source and header files. Some source has GPL license
- Changes from version 1.28:
+ sg_unmap: new utility for thin provisioning
- add examples/sg_unmap_example.txt
+ sg_get_lba_status: new utility for thin provisioning
+ sg_read_block_limits: new utility for tape drives
+ sg_logs: add cache memory statistics log (sub)page
+ sg_vpd, sg_inq: extend Block limits VPD page (sbc3r19)
+ sg_vpd: add Thin provisioning VPD page (sbc3r20) and
TapeAlert supported flags VPD page
+ sg_inq: note VPD page support better in sg_vpd
+ sg_persist: add transport specific transportID format
- allow transportIDs to be read from named file
+ sg_opcodes: allow --opcode= option to take OP and SA
values (comma seperated)
- tweak print format, remove test code
+ sg_requests: remove test code in progress calculation
+ sg_reset: add target reset option
+ sg_luns: reduce default maxlen to 8192 (for FreeBSD)
+ sg_raw: extend max cdb length from 16 to 256 bytes
- align heap allocs to page boundaries
+ sg_lib: sg_set_binary_mode() needs config.h included
- add progress indication sense data descriptor (0xa)
- change SG3_UTILS_* constants to SG_LIB_*
- decode service actions within persistent reserve in/out
- sync with spc4r21
+ sg_cmds_extra: add sg_ll_unmap() and sg_ll_get_lba_status()
+ sg_pt_linux: fix check condition but empty sense buffer;
- major() macro grief, if present include <linux/kdev_t.h> and
use MAJOR() instead
+ scripts/sas_disk_blink: moved from this package to sdparm
+ utils/hxascdmp: in Windows set binary mode on read files
+ examples/sg_persist_tst.sh: add PRIN read full status command
+ sg_raw,sg_write_buffer,sg_write_long,sg_write_same: in Windows
set binary mode on read files
+ sg_pt_win32: default to non-direct variant of SPT interface
- use './configure --enable-win32-spt-direct' to override
- non-direct data length set to 16 KB, extended if required
+ debian: incorporate patch from debian sid
-------------------------------------------------------------------
Mon Jun 28 06:38:35 UTC 2010 - jengelh@medozas.de
- use %_smp_mflags
-------------------------------------------------------------------
Tue Jul 21 14:00:16 CEST 2009 - hare@suse.de
- Clean up spec file and remove obsolete cruft
-------------------------------------------------------------------
Fri Apr 17 20:15:58 CEST 2009 - crrodriguez@suse.de
- remove static libraries and "la" files
-------------------------------------------------------------------
Mon Jan 26 15:30:31 CET 2009 - hare@suse.de
- Fixes to rescan-scsi-bus.sh:
* Implement '--forcerescan' to force a rescan of existing devices
* Handle LUN changes correctly
* Check variables before evaluation
-------------------------------------------------------------------
Wed Oct 29 11:05:47 CET 2008 - garloff@suse.de
- rescan-scsi-bus.sh 1.29:
* Fix error in script (returning "" does not work)
* Support systems without /proc/scsi
- Don't install INSTALL
-------------------------------------------------------------------
Tue Sep 30 14:11:15 CEST 2008 - hare@suse.de
- Add %insserv_prereq (bnc#423204)
-------------------------------------------------------------------
Fri Sep 12 20:29:08 CEST 2008 - garloff@suse.de
- Update rescan-scsi-bus.sh script to 1.28:
* Merge fixes from Hannes
* Minor cleanups
* Sort hosts numerically
-------------------------------------------------------------------
Tue Aug 12 18:25:43 CEST 2008 - garloff@suse.de
- Update to sg3_utils-1.27:
* Adapted to linux-2.6.26 (sg_map26)
* sg_dd uses flock (rw -- if that fails ro)
* sg_get_config: OSSC feature (mmc6r02)
- Update to sg3_utils-1.26:
* Minor fixes and enhancements to
sg_sat_phy_event, sg_ses, sg_get_config, sg_verify, sg_vpd,
sg_inq, sg_modes, sg_start, sg_request, sg_luns, sg_dd,
sg_opcodes, sg_turs.
* sg_lib: asc/ascq update for spc4r15, osd2r03 service actions,
sense key specific unit attn queue overflow decoding, ...
* Restructuring: sg_lib -> sg_lib_data, sg_inq_data, (u)int64_t,
sg_io_linux -> lib/.
* Documentation enhancements.
-------------------------------------------------------------------
Wed Jul 16 09:55:33 CEST 2008 - hare@suse.de
- Use correct length parameter for sg_inq (bnc#363438)
-------------------------------------------------------------------
Fri May 23 10:22:31 CEST 2008 - hare@suse.de
- Use 'Provides' to clean update dependency
-------------------------------------------------------------------
Fri May 9 17:31:33 CEST 2008 - schwab@suse.de
- Use autoreconf -i.
-------------------------------------------------------------------
Thu Apr 24 14:14:14 CEST 2008 - hare@suse.de
- Split off from original scsi package.
Reference in New Issue View Git Blame Copy Permalink