- Update to 5.2
- Fix gcc dependency for Leap 16 in spec
* On the Mac, substantially improve responsiveness during scrolling
and zooming, with threaded paint and various perceptual changes.
If threaded paint causes instability, it can be disabled by setting
the SV_NO_THREADED_PAINT environment variable (to anything).
(Sonic Visualiser was previously perceptually more sluggish on the
Mac than on other platforms, where this change was not necessary)
* Fix habit of holding open the device microphone after recording
* Improve compatibility with Vamp plugins that return unexpectedly
many values in features
* Improve compatibility with Vamp plugins that express units in
variant forms such as "Hertz"
* Fix incorrect choice of UI language on systems with more than one
of the supported languages configured, and on which English (that is
not explicitly regionalised to en_US or en_GB) has a higher priority
than any other supported language. Previously the first other
matching language would have been used; now it will be English
* Fix tendency to pop up a progress dialog over the top of any user
input needed when opening a file
OBS-URL: https://build.opensuse.org/request/show/1252589
OBS-URL: https://build.opensuse.org/package/show/multimedia:apps/sonic-visualiser?expand=0&rev=48
- Use gcc-12 for Leap 15.6
- Update to 5.0
* Port to Qt6. The code now builds only with Qt6, and Qt5 is no
longer supported
* Add mechanism to ignore plugins on subsequent runs if they fail to
load, and to review ignored plugins from the preferences dialog
* Add Mel scale to the options for vertical spectrogram scale
* Add an opaque toggle to the spectrogram; switching it off gives
spectrograms some transparency, so they can be overlaid over other
layers, including other spectrograms
* Update opaque toggle in colour 3d layers so that it works like the
new one in the spectrogram. Previously colour 3d plot layers could
be translucent at low resolutions but not at higher ones; now the
setting affects all resolutions. Correspondingly make it default to
off, as in the spectrogram
* Add smoothing toggle directly to spectrogram parameters, like the
one already found in colour 3d plot layers. Previously spectrogram
smoothing could be toggled only from the preferences
* Stop snapping spectrogram frequency range to bin frequencies. This
already-confusing feature caused problems with the new support for
translucent spectrograms, which permits overlaying spectrograms of
differing bin counts that would be too hard to line up properly if
the frequency extents were always snapped to the nearest bin
* Clarify keyboard and mouse shortcut descriptions in the Key And
Mouse Reference window, especially for the platform-specific
descriptions used on the Mac, and add a few more alternative
shortcuts including more standard zoom in/out shortcuts
* Fix disappearing peaks in peak-bin display mode in the spectrogram,
caused by overzealous smoothing
* Fix jumps in spectrogram when changing zoom level between certain
values in hi-dpi pixel-doubled situations, caused by a failure of
cache invalidation
* Fix some very slow spectrogram painting
* Fix disappearance of right-button Transforms menu after file load
* Fix inconsistent default vs set threshold values in spectrogram
* Fix crash on painting very low-resolution dense 3d plots
OBS-URL: https://build.opensuse.org/request/show/1199756
OBS-URL: https://build.opensuse.org/package/show/multimedia:apps/sonic-visualiser?expand=0&rev=44
- Update to 4.5.2
- Remove sonic-visualiser-Fix-build-failure.patch as fixed in upstream
- Use system vamp host sdk
* Support multi-line text labels on time instants
* Improve refresh and rendering of text labels in various layers
* Improve abbreviation of layer names in the key at bottom-right of a
pane
* Fix repeated writes to settings file when rendering time-ruler
layers at close zoom levels
* Use system Vamp host SDK if provided
- Changes in 4.5.1
* Update to use Rubber Band v3 with its higher quality timestretcher
(the older, lower-CPU one is still available in preferences). This
means the build requires rubberband-3.0.0 or newer, so you may need
to install it separately if building on an older system.
* Fix inability to select Hz as the unit of a layer following import
* Provisional fix to bailing out on startup when invoked with "Open
With..." on Mac
* Fix nonsense display when showing frequency scaled points with value
of 0Hz
OBS-URL: https://build.opensuse.org/request/show/1094500
OBS-URL: https://build.opensuse.org/package/show/multimedia:apps/sonic-visualiser?expand=0&rev=40
- Update to version 4.0
* Add Box annotation layer type, typically used for time-frequency boxes
to be annotated over a spectrogram. Because this introduces a new layer
type into the session file format, the major version number has been
bumped to v4.0. Sessions saved from v4.0 can still be opened in earlier
versions of Sonic Visualiser, but any Box layers will not be loaded
* Fix behaviour of auto-align layers on top of waveform: they can now be
aligned in the vertical scale, if they have a unit of V and the waveform
is of a single channel in linear or dB mode
* Make the UI more readable in macOS "dark mode"
* Fix sluggishness in starting and stopping playback when using PulseAudio
v13.0+
Changes in version 3.3
* Add support for reading the Opus audio codec on all platforms
* Add support for WMA and AAC formats on 64-bit Windows. (AAC was already
supported on macOS.) Note that AAC support on Windows does not support
"gapless" import, i.e. removing the encoder gaps at start and end of
the stream
* Add ability to choose the field separator when importing CSV and
CSV-like files, if more than one possible candidate separator is
found in the file
* Fix crash when closing session or starting a new session while
calculating alignment of multiple audio files
* Fix crash when running certain plugins that call for frequency-domain
input at non-power-of-two block sizes
* Fix wandering left edge of measure-tool rectangle while dragging out
the area
* Ensure that plugin stderr debug output is logged to the SV log file
- Refreshed sonic-visualiser-system-dataquay.patch
- Update to version 3.2.1
* Fix failure to record from built-in microphone on macOS 10.14
(caused by lack of microphone permission request text)
* Fix crash when closing SV or starting a new session during recording
* Fix crash on exit in some builds that disable OSC support
* Fix flashing effect when scrolling certain configurations of colour 3d
plot layer leftwards
Changes in version 3.2
* Add ability to zoom closer than one sample per pixel, so as to see
the interpolated signal level between samples
* Add oversampling control to the spectrogram and spectrum layers
* Highlight and label frequency peaks in the spectrum as the mouse
rolls over them, when enabled in the parameter area
* Add feature to convert and import audio from a CSV data file
* Add some new colour maps, and restore the old Blue on Black one
* Speed up spectrum rendering at high resolutions
* Fix failure to pass Nyquist bins correctly to
frequency-domain-input Vamp plugins in some circumstances
* Fix sometimes incorrect shortcut associations for new-layer menu
items
* Various other rendering improvements and bug fixes
- Refreshed sonic-visualiser-system-dataquay.patch
- Use gcc7 on Leap 42.3 to fix build
- Update to version 3.1.1
* Fix failure to record correctly into an empty session with
certain audio drivers
* Fix failure to run LADSPA plugins at all, except with some
unusual path layouts
* Fix failure to silence sonified notes when rewinding backwards
or jumping back from a loop endpoint
- Fixed the tests and dropped
sonic-visualiser-remove-svcore-test.patch
- Update to version 3.1
* Add Plugins tab to Preferences dialog, from which you can
review the plugin load paths and see which plugins were
loaded from which locations, and also customise load paths
(though the various path environment variables are still
supported)
* Stream the export of audio data and other CSV data so that
very large exports don't hang the UI or run us out of memory
(thanks to Lucas Thompson)
* Ensure vertical scale appears for auto-align layers when
there is nothing else to auto-align them to
* Fix another long-standing Windows-platform wide-char/utf8
conversion problem, with environment variable naming and
contents
* Improve handling of incomplete session loads, i.e.
situations where the audio files referred to by a session
could not be found - previously the session could be re-saved
immediately thus losing the audio reference; now at least we
disable Save (enabling only Save As) and show a warning
* Update pane and layer menu shortcuts so that the
waveform/spectrogram/etc shortcuts (Shift+G etc) operate on
the source model in the currently-selected pane rather than
the main model. This is a backward-incompatible change but is
a far more intuitive way for the function to work
* Use dark background for bright colours in time-value/note/etc
layers as well as e.g. waveforms - this is how it was always
"intended to" work, but it is a backward-incompatible change
* Make "Select All" select the whole span of everything that
exists, not just the main model
* Add horizontal scale to Spectrum layer
* Improve spacing and labelling of vertical log scales
* Update build system for better Cap'n Proto version support
and to use Repoint for code management in the repository
* Various other bug fixes
- Dropped piper.capnp (fixed upstream)
- Refreshed sonic-visualiser-remove-svcore-test.patch
- Added sonic-visualiser-system-dataquay.patch
- Spec cleanup
- Build against dataquay also in Tumbleweed
- Update to version 3.0.3
* Improve decisions about where and how to label vertical scales
* Update build support material and documentation to reflect the
official release of Cap'n Proto 0.6 (which we can now use rather
than depending on git builds)
version 3.0.2:
* Fix crash when changing parameters for spectrum view
* Fix incorrect measure tool crosshairs in spectrum view
* Update Russian and Czech UI translations (thanks to Alexandre
Prokoudine and Pavel Fric respectively)
version 3.0.1:
* Update MIDI input driver layer
version 3.0:
* Add ability to record audio, and ability to change the audio
device for playback or recording in the preferences
* Add complete support for high-resolution (Hi-DPI or retina)
displays, including for layer data rendering as well as UI
controls and icons. This makes the biggest difference when using
a retina Mac, on which previous versions did not render layer
data at retina resolution, but it also improves scaling and
rendering of UI elements on Hi-DPI displays on Windows and Linux
* Add ability to export scalable (SVG) image files
* Run plugins in a separate process, so that if a plugin crashes,
it no longer brings down Sonic Visualiser with it. In every other
respect the behaviour should be unchanged
* Scan plugins on startup in a separate process, and report on any
that crash or won't load
* Add ability to open, display, and analyse very long audio files
(of more than 2^32 sample frames)
* Change mp3 file loading so as to compensate for encoder/decoder
delay and padding (using "gapless playback" logic). While this
is a real improvement, unfortunately it does mean that the
initial padding in mp3 file load has changed from previous
versions, which may mean some sessions saved in previous versions
are no longer correctly aligned. It's not a great idea to use mp3
as a file format of record, because of differences like this
between decoders. The previous behaviour is still available as a
preference.
* Add new Hybrid normalisation type for spectrogram and colour 3d
plot layers. This normalises each column to its peak value and
then scales the normalised values by the log of the peak in order
to restore some distinction in scale between columns with
different levels. It can provide quite visually clear results.
* Add function to subdivide time instant layers into regular
intervals (and its inverse)
* Add new preference for default colour scales
* Add a basic ability to zoom (in the frequency axis) to the
spectrum
* Switch to using combined level/pan controls in layer property
boxes and for the main volume control
* Make CSV file reader better able to handle files with varying
numbers of columns
* Add "What's New" dialog
- Dropped sonic-visualiser-ld-X11-fix.patch and refreshed
sonic-visualiser-remove-svcore-test.patch
- Added piper.capnp schema to generate sources without the
hardcoded capnp 0.6.0
- Dropped sonic-visualiser.desktop
- Added fishsound requirement
- Remove mad conditional because it is always present
- Update to version 2.5
* Add unit-converter dialog, for converting between various
pitch and timing units
* Fix failure to reload note layers from session file
* Use a more sensible scale for the play-speed dial
* Fix crash when importing very wide CSV files
* Fix generation of wrong layer type from some CSV files
* Fix failure to export last instant in a time-instant layer
version 2.4:
* Fix a crash when rendering certain colour 3d plot layers
version 2.3:
* Add support for left/right scrolling using a two-finger
touchpad gesture (where available)
* Make the octave numbering into a configurable option, and
change the default. Previously Sonic Visualiser labelled
middle-C as "C3"; now it labels middle-C as "C4", a more
common standard in the world outside MIDI sequencer
software. The previous system is available as an option
in the Preferences. This affects only the visible
labels: there is no change to analysis or to the file
format
* Sonify time-value layers. Any time-value curve whose scale
unit is set to Hz will now acquire a playback toggle
control; this control is off by default, but if it is
switched on, the curve will be played back using a
variable-frequency sound generator
* Add support for playback of note layers with non-MIDI
frequencies (formerly the note playback was limited to
exact MIDI pitch)
* Change the default playback sample for note layers from
piano to an electric piano with sustain. The piano sample
is still available, and any sessions saved using it should
continue to use it
* Add a cancel button for Vamp plugin processing: currently,
cancelling a transform results in a part-complete layer
rather than removing the results
* Add keyboard shortcuts to cycle the current layer (in
addition to the existing ones to cycle the current pane)
* Fix various bugs related to layer ordering: layer tabs
re-ordering themselves randomly when new layer added,
layers being ordered randomly when saving and reloading
a session
* Fix incorrect interaction with non-Unicode usernames when
creating temporary and template directories on Windows
* Shade the start and end of the main audio file, to make
them easier to see for files that start or end in silence
* Speed up rendering and scrolling in time-value layers
* Make it possible to import CSV files directly into Note
layers by adding Pitch as a data type in the CSV file
import dialog
* Fix play pointer jump to wrong frame when clicking on row
in the layer edit dialog
* Fix problems with keyboard shortcuts when using Qt5 on
OS/X. This is the first release in which the official
builds use Qt5 for all platforms.
version 2.2:
* Add a startup welcome dialog that also explains what SV
makes network connections for and allows user to forbid
them
* Add "Export Audio Data" feature
* Show piano keyboard scale in note and time-value layers as
well as spectrogram, where vertical scale is log Hz; also
show numerical scale in note and region layers when not
auto-aligned
* Speed up CSV file import and avoid showing crazily wide
window for CSV file format dialog when file has lots of
columns
* Fix incorrectly saved window geometry when exiting from
maximised state
* Reduce number of timer wakeups when idle
* Add American English translation and make choice of
translation into a preference (defaulting to system locale)
* Permit installation to non-default location with Windows
installer build
version 2.1:
* Build with support for hidpi ("retina") text on OS/X
* Fix very slow analysis when using Ogg or FLAC files decoded
via libsndfile
* Fix inaccurate scale auto-align between time-value layers
and others
* Fix failure to open files specified on command line (or via
Open With) on Windows
* Reset cyclical counters and switch back to navigate mode
when a new session is started
version 2.0.1:
* Fix incorrect handling of FixedSampleRate outputs (Vamp
SDK fix)
* Make it easier to see results from transforms that return
a single point
* Make labelling clearer on time-value layers
* Add discrete-curve mode for time-value layers (for curves
with gaps)
* Update code to build against Qt5
version 2.0:
* Fix incorrect samplerate in reading m4a files on OS/X
version 1.9:
* Support 64-bit builds on OS/X (using CoreAudio instead of
obsolete QuickTime audio file reader)
* Simplify RDF reading and fix some bugs. Now requires
Dataquay (http://breakfastquay.com/dataquay/) rather than
using Redland directly. Release builds use Sord/Serd rather
than Redland
* Add a fullscreen mode on the F11 key
- Refreshed sonic-visualiser-ld-X11-fix.patch
- Removed gcc-4.7.patch
- Added sonic-visualiser-remove-svcore-test.patch
sonic-visualiser.desktop and sonic-visualiser.xml
- Spec cleanup
- Patch to fix build (gcc-4.7.patch)
- add bits to enable mp3 support with mad when built on Packman
- remove dependency on licenses, gone in 12.1
- reformat spec file, fix license tag to be compliant with SPDX
- update to 1.9
- update to 1.7.2
- update to 1.7.1
- This release contains a small number of enhancements and bug fixes.
For more information, please read the change log at:
https://sourceforge.net/projects/sv1/files/sonic-visualiser/1.7.1/CHANGELOG/download
- update to 1.7
- The main focus of this release is to improve editing of note and region layers.
It can import MIDI files that use SMPTE timecode for event timing, and
optionally display time in seconds and frames at various frame rates throughout.
A crash on exit in Windows has been fixed, and a number of other bugfixes are
included.
- update to 1.5
- update to 1.4
- update to 1.3
- using new rubberband-1.2
- added PulseAudio output driver
- rebuild with new vamp-plugin-sdk
- update to 1.2
- rebuild with new libraptor/vamp-sdk packages
- openSUSE-10.3 build corrected BuildRequires
- rebuild with libfishsound1 (0.8.0)
- update to 1.0
- update to 1.0pre3
- moved all vamp-plugins to seperate packages
- using vamp-plugin-sdk to build
- switched to portaudio-19
- build SuSE-10.2, corrected BuildRequires
- build for packman
- rebuild for SuSE-10.1 (no dssi-devel)
- Initial release 0.9
- added vamp-QM-plugin 1.0
- added vamp-aubio-plugin 0.3.0
- added vamp-mazurka-plugins
download sources from http://sv.mazurka.org.uk and packaged as tar.bz2,
added libmain.cpp and create a shared lib with allmazurka-plugins
OBS-URL: https://build.opensuse.org/request/show/744887
OBS-URL: https://build.opensuse.org/package/show/multimedia:apps/sonic-visualiser?expand=0&rev=24
- Update to version 3.2.1
* Fix failure to record from built-in microphone on macOS 10.14
(caused by lack of microphone permission request text)
* Fix crash when closing SV or starting a new session during recording
* Fix crash on exit in some builds that disable OSC support
* Fix flashing effect when scrolling certain configurations of colour 3d
plot layer leftwards
Changes in version 3.2
* Add ability to zoom closer than one sample per pixel, so as to see
the interpolated signal level between samples
* Add oversampling control to the spectrogram and spectrum layers
* Highlight and label frequency peaks in the spectrum as the mouse
rolls over them, when enabled in the parameter area
* Add feature to convert and import audio from a CSV data file
* Add some new colour maps, and restore the old Blue on Black one
* Speed up spectrum rendering at high resolutions
* Fix failure to pass Nyquist bins correctly to
frequency-domain-input Vamp plugins in some circumstances
* Fix sometimes incorrect shortcut associations for new-layer menu
items
* Various other rendering improvements and bug fixes
- Refreshed sonic-visualiser-system-dataquay.patch
OBS-URL: https://build.opensuse.org/request/show/672835
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/sonic-visualiser?expand=0&rev=7
- Update to version 3.2.1
* Fix failure to record from built-in microphone on macOS 10.14
(caused by lack of microphone permission request text)
* Fix crash when closing SV or starting a new session during recording
* Fix crash on exit in some builds that disable OSC support
* Fix flashing effect when scrolling certain configurations of colour 3d
plot layer leftwards
- Changes in version 3.2
* Add ability to zoom closer than one sample per pixel, so as to see
the interpolated signal level between samples
* Add oversampling control to the spectrogram and spectrum layers
* Highlight and label frequency peaks in the spectrum as the mouse
rolls over them, when enabled in the parameter area
* Add feature to convert and import audio from a CSV data file
* Add some new colour maps, and restore the old Blue on Black one
* Speed up spectrum rendering at high resolutions
* Fix failure to pass Nyquist bins correctly to
frequency-domain-input Vamp plugins in some circumstances
* Fix sometimes incorrect shortcut associations for new-layer menu
items
* Various other rendering improvements and bug fixes
OBS-URL: https://build.opensuse.org/request/show/670921
OBS-URL: https://build.opensuse.org/package/show/multimedia:apps/sonic-visualiser?expand=0&rev=21
- Update to version 3.1
* Add Plugins tab to Preferences dialog, from which you can
review the plugin load paths and see which plugins were
loaded from which locations, and also customise load paths
(though the various path environment variables are still
supported)
* Stream the export of audio data and other CSV data so that
very large exports don't hang the UI or run us out of memory
(thanks to Lucas Thompson)
* Ensure vertical scale appears for auto-align layers when
there is nothing else to auto-align them to
* Fix another long-standing Windows-platform wide-char/utf8
conversion problem, with environment variable naming and
contents
* Improve handling of incomplete session loads, i.e.
situations where the audio files referred to by a session
could not be found - previously the session could be re-saved
immediately thus losing the audio reference; now at least we
disable Save (enabling only Save As) and show a warning
* Update pane and layer menu shortcuts so that the
waveform/spectrogram/etc shortcuts (Shift+G etc) operate on
the source model in the currently-selected pane rather than
the main model. This is a backward-incompatible change but is
a far more intuitive way for the function to work
* Use dark background for bright colours in time-value/note/etc
layers as well as e.g. waveforms - this is how it was always
"intended to" work, but it is a backward-incompatible change
* Make "Select All" select the whole span of everything that
exists, not just the main model
* Add horizontal scale to Spectrum layer
* Improve spacing and labelling of vertical log scales
* Update build system for better Cap'n Proto version support
and to use Repoint for code management in the repository
* Various other bug fixes
- Dropped piper.capnp (fixed upstream)
- Refreshed sonic-visualiser-remove-svcore-test.patch
- Added sonic-visualiser-system-dataquay.patch
- Spec cleanup
OBS-URL: https://build.opensuse.org/request/show/623649
OBS-URL: https://build.opensuse.org/package/show/multimedia:apps/sonic-visualiser?expand=0&rev=13
- Update to version 3.0.3
* Improve decisions about where and how to label vertical scales
* Update build support material and documentation to reflect the
official release of Cap'n Proto 0.6 (which we can now use rather
than depending on git builds)
version 3.0.2:
* Fix crash when changing parameters for spectrum view
* Fix incorrect measure tool crosshairs in spectrum view
* Update Russian and Czech UI translations (thanks to Alexandre
Prokoudine and Pavel Fric respectively)
version 3.0.1:
* Update MIDI input driver layer
version 3.0:
* Add ability to record audio, and ability to change the audio
device for playback or recording in the preferences
* Add complete support for high-resolution (Hi-DPI or retina)
displays, including for layer data rendering as well as UI
controls and icons. This makes the biggest difference when using
a retina Mac, on which previous versions did not render layer
data at retina resolution, but it also improves scaling and
rendering of UI elements on Hi-DPI displays on Windows and Linux
* Add ability to export scalable (SVG) image files
* Run plugins in a separate process, so that if a plugin crashes,
it no longer brings down Sonic Visualiser with it. In every other
respect the behaviour should be unchanged
* Scan plugins on startup in a separate process, and report on any
that crash or won't load
* Add ability to open, display, and analyse very long audio files
(of more than 2^32 sample frames)
* Change mp3 file loading so as to compensate for encoder/decoder
delay and padding (using "gapless playback" logic). While this
is a real improvement, unfortunately it does mean that the
initial padding in mp3 file load has changed from previous
versions, which may mean some sessions saved in previous versions
are no longer correctly aligned. It's not a great idea to use mp3
as a file format of record, because of differences like this
between decoders. The previous behaviour is still available as a
preference.
* Add new Hybrid normalisation type for spectrogram and colour 3d
plot layers. This normalises each column to its peak value and
then scales the normalised values by the log of the peak in order
to restore some distinction in scale between columns with
different levels. It can provide quite visually clear results.
* Add function to subdivide time instant layers into regular
intervals (and its inverse)
* Add new preference for default colour scales
* Add a basic ability to zoom (in the frequency axis) to the
spectrum
* Switch to using combined level/pan controls in layer property
boxes and for the main volume control
* Make CSV file reader better able to handle files with varying
numbers of columns
* Add "What's New" dialog
- Dropped sonic-visualiser-ld-X11-fix.patch and refreshed
sonic-visualiser-remove-svcore-test.patch
- Added piper.capnp schema to generate sources without the
hardcoded capnp 0.6.0
- Dropped sonic-visualiser.desktop
- Added fishsound requirement
- Remove mad conditional because it is always present
- Update to version 2.5
* Add unit-converter dialog, for converting between various
pitch and timing units
* Fix failure to reload note layers from session file
* Use a more sensible scale for the play-speed dial
* Fix crash when importing very wide CSV files
* Fix generation of wrong layer type from some CSV files
* Fix failure to export last instant in a time-instant layer
version 2.4:
* Fix a crash when rendering certain colour 3d plot layers
version 2.3:
* Add support for left/right scrolling using a two-finger
touchpad gesture (where available)
* Make the octave numbering into a configurable option, and
change the default. Previously Sonic Visualiser labelled
middle-C as "C3"; now it labels middle-C as "C4", a more
common standard in the world outside MIDI sequencer
software. The previous system is available as an option
in the Preferences. This affects only the visible
labels: there is no change to analysis or to the file
format
* Sonify time-value layers. Any time-value curve whose scale
unit is set to Hz will now acquire a playback toggle
control; this control is off by default, but if it is
switched on, the curve will be played back using a
variable-frequency sound generator
* Add support for playback of note layers with non-MIDI
frequencies (formerly the note playback was limited to
exact MIDI pitch)
* Change the default playback sample for note layers from
piano to an electric piano with sustain. The piano sample
is still available, and any sessions saved using it should
continue to use it
* Add a cancel button for Vamp plugin processing: currently,
cancelling a transform results in a part-complete layer
rather than removing the results
* Add keyboard shortcuts to cycle the current layer (in
addition to the existing ones to cycle the current pane)
* Fix various bugs related to layer ordering: layer tabs
re-ordering themselves randomly when new layer added,
layers being ordered randomly when saving and reloading
a session
* Fix incorrect interaction with non-Unicode usernames when
creating temporary and template directories on Windows
* Shade the start and end of the main audio file, to make
them easier to see for files that start or end in silence
* Speed up rendering and scrolling in time-value layers
* Make it possible to import CSV files directly into Note
layers by adding Pitch as a data type in the CSV file
import dialog
* Fix play pointer jump to wrong frame when clicking on row
in the layer edit dialog
* Fix problems with keyboard shortcuts when using Qt5 on
OS/X. This is the first release in which the official
builds use Qt5 for all platforms.
version 2.2:
* Add a startup welcome dialog that also explains what SV
makes network connections for and allows user to forbid
them
* Add "Export Audio Data" feature
* Show piano keyboard scale in note and time-value layers as
well as spectrogram, where vertical scale is log Hz; also
show numerical scale in note and region layers when not
auto-aligned
* Speed up CSV file import and avoid showing crazily wide
window for CSV file format dialog when file has lots of
columns
* Fix incorrectly saved window geometry when exiting from
maximised state
* Reduce number of timer wakeups when idle
* Add American English translation and make choice of
translation into a preference (defaulting to system locale)
* Permit installation to non-default location with Windows
installer build
version 2.1:
* Build with support for hidpi ("retina") text on OS/X
* Fix very slow analysis when using Ogg or FLAC files decoded
via libsndfile
* Fix inaccurate scale auto-align between time-value layers
and others
* Fix failure to open files specified on command line (or via
Open With) on Windows
* Reset cyclical counters and switch back to navigate mode
when a new session is started
version 2.0.1:
* Fix incorrect handling of FixedSampleRate outputs (Vamp
SDK fix)
* Make it easier to see results from transforms that return
a single point
* Make labelling clearer on time-value layers
* Add discrete-curve mode for time-value layers (for curves
with gaps)
* Update code to build against Qt5
version 2.0:
* Fix incorrect samplerate in reading m4a files on OS/X
version 1.9:
* Support 64-bit builds on OS/X (using CoreAudio instead of
obsolete QuickTime audio file reader)
* Simplify RDF reading and fix some bugs. Now requires
Dataquay (http://breakfastquay.com/dataquay/) rather than
using Redland directly. Release builds use Sord/Serd rather
than Redland
* Add a fullscreen mode on the F11 key
- Refreshed sonic-visualiser-ld-X11-fix.patch
- Removed gcc-4.7.patch
- Added sonic-visualiser-remove-svcore-test.patch
sonic-visualiser.desktop and sonic-visualiser.xml
- Spec cleanup
- Patch to fix build (gcc-4.7.patch)
- add bits to enable mp3 support with mad when built on Packman
- remove dependency on licenses, gone in 12.1
- reformat spec file, fix license tag to be compliant with SPDX
- update to 1.9
- update to 1.7.2
- update to 1.7.1
- This release contains a small number of enhancements and bug fixes.
For more information, please read the change log at:
https://sourceforge.net/projects/sv1/files/sonic-visualiser/1.7.1/CHANGELOG/download
- update to 1.7
- The main focus of this release is to improve editing of note and region layers.
It can import MIDI files that use SMPTE timecode for event timing, and
optionally display time in seconds and frames at various frame rates throughout.
A crash on exit in Windows has been fixed, and a number of other bugfixes are
included.
- update to 1.5
- update to 1.4
- update to 1.3
- using new rubberband-1.2
- added PulseAudio output driver
- rebuild with new vamp-plugin-sdk
- update to 1.2
- rebuild with new libraptor/vamp-sdk packages
- openSUSE-10.3 build corrected BuildRequires
- rebuild with libfishsound1 (0.8.0)
- update to 1.0
- update to 1.0pre3
- moved all vamp-plugins to seperate packages
- using vamp-plugin-sdk to build
- switched to portaudio-19
- build SuSE-10.2, corrected BuildRequires
- build for packman
- rebuild for SuSE-10.1 (no dssi-devel)
- Initial release 0.9
- added vamp-QM-plugin 1.0
- added vamp-aubio-plugin 0.3.0
- added vamp-mazurka-plugins
download sources from http://sv.mazurka.org.uk and packaged as tar.bz2,
added libmain.cpp and create a shared lib with allmazurka-plugins
OBS-URL: https://build.opensuse.org/request/show/520067
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/sonic-visualiser?expand=0&rev=1
- Update to version 3.0.3
* Improve decisions about where and how to label vertical scales
* Update build support material and documentation to reflect the
official release of Cap'n Proto 0.6 (which we can now use rather
than depending on git builds)
version 3.0.2:
* Fix crash when changing parameters for spectrum view
* Fix incorrect measure tool crosshairs in spectrum view
* Update Russian and Czech UI translations (thanks to Alexandre
Prokoudine and Pavel Fric respectively)
version 3.0.1:
* Update MIDI input driver layer
version 3.0:
* Add ability to record audio, and ability to change the audio
device for playback or recording in the preferences
* Add complete support for high-resolution (Hi-DPI or retina)
displays, including for layer data rendering as well as UI
controls and icons. This makes the biggest difference when using
a retina Mac, on which previous versions did not render layer
data at retina resolution, but it also improves scaling and
rendering of UI elements on Hi-DPI displays on Windows and Linux
* Add ability to export scalable (SVG) image files
* Run plugins in a separate process, so that if a plugin crashes,
it no longer brings down Sonic Visualiser with it. In every other
respect the behaviour should be unchanged
* Scan plugins on startup in a separate process, and report on any
that crash or won't load
* Add ability to open, display, and analyse very long audio files
(of more than 2^32 sample frames)
* Change mp3 file loading so as to compensate for encoder/decoder
delay and padding (using "gapless playback" logic). While this
is a real improvement, unfortunately it does mean that the
initial padding in mp3 file load has changed from previous
versions, which may mean some sessions saved in previous versions
are no longer correctly aligned. It's not a great idea to use mp3
as a file format of record, because of differences like this
between decoders. The previous behaviour is still available as a
preference.
* Add new Hybrid normalisation type for spectrogram and colour 3d
plot layers. This normalises each column to its peak value and
then scales the normalised values by the log of the peak in order
to restore some distinction in scale between columns with
different levels. It can provide quite visually clear results.
* Add function to subdivide time instant layers into regular
intervals (and its inverse)
* Add new preference for default colour scales
* Add a basic ability to zoom (in the frequency axis) to the
spectrum
* Switch to using combined level/pan controls in layer property
boxes and for the main volume control
* Make CSV file reader better able to handle files with varying
numbers of columns
* Add "What's New" dialog
- Dropped sonic-visualiser-ld-X11-fix.patch and refreshed
sonic-visualiser-remove-svcore-test.patch
- Added piper.capnp schema to generate sources without the
hardcoded capnp 0.6.0
- Dropped sonic-visualiser.desktop
- Added fishsound requirement
OBS-URL: https://build.opensuse.org/request/show/519913
OBS-URL: https://build.opensuse.org/package/show/multimedia:apps/sonic-visualiser?expand=0&rev=9
