pool/stress-ng
SHA256
2
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
65fc727f80
stress-ng/stress-ng.changes

1261 lines
59 KiB
Plaintext
Raw Blame History

-------------------------------------------------------------------
Fri Jan 6 15:09:10 UTC 2017 - mpluskal@suse.com
- Update to version 0.07.13:
* Makefile: bump version
* Makefile: rename check rule to fast-check-all
* manual: update date
* stress-udp: fix build warning on minix
* stress-mmap: fix build issue with ms_flags on GNU/HURD and minix
* add a make check rule to run debian/tests/fast-test-all
* stress-pthread: add error checking on cond, mutex and spinlock init
* add shim abstraction to msync, use this on various stressors
* stress-pthread: check for init failures and use a spinlock on counter
* add new dirdeep max depth directory stressor
* README: Update info on libraries required for a full build
* stress-cpu: fix missing bogo ops counter increment
* enforce 64 byte alignment to buffer
* stress-futex: fix typo in comment
* ensure stacks are aligned to 64 byte boundaries
* stress-hdd: use new align_address helper
* helper: add align_address helper to align a address to power of 2 boundary
* stress-sysinfo: only dump out info on number of mount points on instance 0
* trivial typo in man page
- Changes for version 0.07.12:
* Makefile: bump version
* stress-udp: minix fails on setsockopt SO_REUSEADDR, so ignore it
* stress-get: don't use NULL delta, just pass a zero delta timeval struct
* stress-fifo: catch EINTR as non-fatal error on open
* stress-resources: fix warning message on unused parameter 'pipe_size'
* debian/tests: remove dccp from fast-test-all
* helper: fix build issues on non-linux targets
* update date in the manual
* stress-resources: add pty resource suckage
* stress-resources: add inotify resource suckage
* stress-resources: try to expande pipe to maximum allowed size
* stress-oom-pipe: use stress_probe_max_pipe_size helper
* helper: add stress_probe_max_pipe_size to fine max pipe size
* Add Datagram Congestion Control Protocol dccp stressor
* stress-resources: add single pthread as another resource hogger
* ensure -v output is no wider than 80 chars to avoid line wrap on std tty
* stress-schedpolicy: set policy with param, remove unused new_param
- Changes for version 0.07.11:
* Makefile: bump version
* thrash: bump the priority to 10
* thrash: use RR scheduler if possible on linux
* stress-sctp: don't unlink on an address that is NULL
* stress-schedpolicy: the set/get param was a bit unsound, fix it
* stress-fault: silence a clang warning
* stress-membarrier: pass thread arg as a ctxt_t * type
* helper: make __stress_get_stack_direction static
* stress-fstat: rename jump buffer to jmpbuf to avoid name shadowing
* mlock: fix warning with older pre gcc 4.4 on solaris
* helper: fix some more print pid_t warnings
* fix warnings on printing pid_t type
* stress-cpu: only use gcc optimise attribute on gcc 4.4 or higher
* small cleanups to stress-ng.h
* stress-personality: return EXIT_NOT_IMPLEMENTED if no personalities exist
* replace #ifdef with #if defined() as the default idiom
* makefile: use grep -e instead of grep -f
* add support macro for gcc-7 switch statement case fallthrough
- Changes for version 0.07.10:
* add copyright boiler plate on fast-test-all
* stress-personality: move memset to avoid memset 0 sized array
* forgot to add shim_getlogin to stress-ng.h
* shim: add more secure version of getlogin
* stress-mmapfork: fix typo on buffer sizeof
* stress-link: ensure buffer returned from readlink is terminated with zero
* shim_usleep: use nanosleep if it is available, fallback to older usleep
* stressors: use shim_usleep instead of deprecated usleep
* shim: abort early from shim_usleep if opt_do_run is false
* add usleep shim
* stress-opcode: rename signal handler dummy arg to signum
* stress-membarrier: memset pthread_ret with correct size
* stress-shm: use shim_fallocate rather than posix_fallocate
* stress-hdd: workaround lack of posix_memalign on sun
* stress-rmap: sun builds may not have posix_fallocate, so don't build it
* stress-wait: work around long int pid_t warnings on Sun systems
* stress-wcstr: sun wide char support has some wcs funcs missing
* stress-flock: disable this stressor for sun machines
* makefile: use -f instead of -e for Solaris versions of test
- Changes for version 0.07.09:
* Makefile: bump version
* helper: fix cppcheck warning by initialising val1
* stress-fstat: don't open /dev files to stat them when running as root
* stress-fstat: don't bump counter if fstat fails
* stress-fstat: perform end of test check earlier than later
* stress-sync_file: use sync_file_range2() where required
* allow for static building, using STATIC=1 make
- Changes for version 0.07.08:
* Makefile: bump version
* add NOCLOBBER macro and make some variables noclobberable
* stress-aio-linux: clean up clang warnings
* remove need to pass an argument to stress_get_stack_direction
* add smatchify script to make dist rule
* add smatchify static analysis script
* stress-userfaultfd: remove unnecessary exit_status call
* stress-socket: fix inconsistent indenting
* fast-test-all: remove tailing tabs
* snapcraft Makefile: remove trailing whitespace
* stress-daemon: clean up fd closing and add SIGALRM handler
* make daemon stressor a little more responsive to SIGALRMs
* make snapcraft confinement strict
* getrandom: add support for systems that support getentropy(2)
* shim: add comment about shim functions
* helper: remove caches = NULL for non-linux systems to fix build error
* shim: fall back to allocation via writes on fallocate
* stress-yield: remove need to use alloca, use calloc instead
* manual: add Luis to contributors list and sort names alphabetically
* shim: fix userfaultfd failures due to a typo
* increase STRESS_PROCS_MAX to 4096 for higher load on large iron
* stress-userfaultfd: work around static analysis false positive on fd
* stress-stream: avoid re-assignment of cpu_caches on linux case
* trash: remove traced, it is serving no purpose
* helper: don't re-assign cpu_caches on __linux__ build
* net: iterate to the size of domains rather than using sentinel
* affinity: remove #includes as these are included in stress-ng.h
* stress-oom: add in missing space between ooms and =
- Changes for version 0.07.07:
* Makefile: bump version
* fast-test-all: don't run spawn test for testing
* fast-test-all: remove check for existence of stress-ng
- Changes for version 0.07.06:
* update build rules for Solaris
* add MINIX notes to README
* shim: add check for posix_fallocate (fixes minix build error)
* abstract loff_t as it is not available on *BSD systems
* fix *BSD systems that don't support ino64_t and off64_t types
* stress-fallocate: use shim_fallocate wrapper
* shim: fix non-Linux build failure on shim_mlock2
* stress-fallocate: remove __linux__ only constraints on modes
* cache: make DCACHE and ICACHE #defines kernel gemeric
* remove white space and tabs at end of lines
* shim: add mlock2 system call to shim
* shim: add sched_getattr and sched_setattr shims
* shim: prefix linux_dirent* structs with shim_
* stress-seal: use shim for memfd_create
* stress-ng: minor re-ordering of structs and shim functions
* shim: rename sys_ioprio_* to shim_ioprio_*
* shim: add unshare system call to shim
* shim: add seccomp system call to shim
* shim: add userfaultfd system call to shim
* shim: add some more __linux__ checks
* stress-opcode: use shim_clear_cache
* shim: add NUMA specific system calls to shim
* shim: add memfd_create system call to shim
* shim: add membarrier system call to shim
* shim: add syslog system call to shim
* shim: add kcmp system call to shim
* shim: add __clear_cache GNUC cache clearing helper to shim
* shim: add getramdom system call to shim
* shim: add getdents and getdents64 system calls to shim
* shim: add getcpu system call to shim
* stress-get: use shim_gettid
* shim: add gettid system call to shim
* shim: add fallocate system call to shim
* shim: add copy_file_range system call to shim
* shim: add cacheflush system call to shim
* add shim abstraction layer for sched_yield()
* fast-test-all: add some feedback on when a test is being run
* use pr_fail_err on some more error messages
* fast-test-all: allow for STRESS_NG to specify stress-ng
* stress-epoll: fix build for GNU/HURD
* move all common #includes into stress-ng.h
* stress-ng.h: Add alloc.h include for sun arch
* stress-ng.h: include some more common headers and define _GNU_SOURCE
* stress-schedpolicy: fix broken counter, it was never being incremented
* stress-resources: fix broken counter, it was never being incremented
* stress-personality: fix broken counter, it was never being incremented
* stress-fp-error: fix broken counter, it was never being incremented
* fix broken counter, it was never being incremented
* stress-bind-mount: fix broken counter, it was never being incremented
* stress-handle: fix memory leak on line and also bump counter
* stress-apparmor: free apparmor_path to fix minor memory leak
* ensure cache region is free before termination
* stress-fstat: use sigsetjmp instead of sigjmp
* wrap some overly wide lines
* use pr_fail_err() instead of pr_fail where appropriate
* reduce scope of iterator variable i
* remove alloca in stressor_name_find
* remove space prefixed on klog-ops option
* mincore: touch pages even when mincore fails
* update syscalls.txt
* stress-schedpolicy: add sched_setattr/sched_getattr calls for Linux
* stress-schedpolicy: add more sched syscalls, clean up code
* add schedpolicy stressor
* stress-ng.h: change macro param name in STRESS macro
- Changes for version 0.07.05:
* Makefile: bump version and update codename
* stress-fstat: fix resource leak on dp on error exit path
* stress-fstat: forcibly abort any system call on SIGALRM
* stress-aio-linux: use return as errno rather than errno
* stress-aio-linux: use return as errno rather than errno
* Need to #include <sched.h> when using clone(2)
-------------------------------------------------------------------
Sat Nov 12 13:29:50 UTC 2016 - mpluskal@suse.com
- Update to version 0.07.04:
* no changes mentioned
- Changes for version 0.07.03:
* stress-ioprio: use current pgrp and not global pgrp (LP: #1640631)
- Changes for version 0.07.02:
* Makefile: bump version
* Manual: Add exit status 4 EXIT_NOT_IMPLEMENTED to documentation
* Treewide: remove messy #if defined() build checks
* Allocate io_reqs on heap rather than alloca
* Makefile: re-format PEDANTIC CFLAGS
* stress-fiemap: fix up --fiemap-bytes option
* stress-sock-fd: add --sockfd-port option
* Add PEDANTIC build flags for extra checking
* stress-icache: fix volatile cast warning
* stress-vm: fix volatile cast warning
* stress-socket: fix shadowing on addr
* stress-mincore: addr does not need to be volatile
* stress-ng, thermal_zone, remove shared param, it is global
* parse-opts: fix char * cast warnings
* perf: remove (char *) cast
* helper: fix warnings
* use gnu printf style attributes to pr_yaml
* helper: cast pointer to const to fix warning
* stress-poll: fix shadowing on ret, rename one to rc
* Fix various bad castings for munge_underscore
* stress-oom-pipe: fix shadowing on fd, rename to pfd to avoid confusion
* stress-mq: remove shadowing variable attr
* stress-hdd: remove duplicate declarations of ret; make it a ssize_t
* stress-ng: make helper functions static
* thrash: rename pid to thrash_pid
* stress-zombie: make helper functions static
* stress-zlib: make helper functions static
* stress-xattr: remove redundant shadowing variable ret
* stress-mremap: fix shadowing on rc, remove rc
* stress-link: fix shadowing on ret
* stress-rw-vm: fix shadowing of ret
* stress-vm-rw: make helper functions static
* stress-unshare: make helper function static
* stress-tsearch: constify pointers
* stress-socket-fd: make helper function static
* stress-seek: fix shadowing on ret
* stress-readahead: make helper function static, fix shadowing on ret
* stress-qsort: constify pointers
* stress-mlock: constify addr pointer cast
* stress-mergesort: constify pointers
* stress-memfd: fix shadowing of variable name
* stress-fork: make helper function static
* stress-lsearch: constify pointer casts
* stress-itimer: make helper function static
* stress-iopri: remove local pgrp that shadows global
* stress-inotify: make helper func static, fix some const casts
* stress-heapsort: fix constify warnings
* stress-handle: make helper functions static
* stress-fp-error: fix float comparison
* stress-fifo: make helper function static, fix ret shadowing
* stress-filename: make helper functions static
* stress-fiemap: make helper functions static
* stress-dnotify: make dnotify_attrib_file static, fix newpath const
* stress-dentry: fix shadowing of variable j
* stress-bsearch: correctly constify casts on i1, i2
* stress-bind-mount: make stress_bind_mount_child static
* stress-cpu-online: make stress_cpu_online_set static
* stress-clone: make stress_clone* helper functions static
* stress-bsearch: constify i1 and i2
* stress-aio-linux: remove duplicate and shadowing variable ret
* stress-af-alg: make helper functions static
* Remove redundant re-declaration of mwc_seed
* stress-cap: sscanf on pid_t should be %d
* Make munge_underscore arg const char *
* Mungify _ to - in stressor names in --stressors option
- Changes for version 0.07.01:
* Makefile: bump version
* manual: update date
* stress-ng: fix build issues for Solaris
* stress-rmap: fix warnings with gcc 3.4.3
* stress-rmap: Don't build for OpenBSD, it does not support posix_fallocate
* stress-rmap: don't build for Minix
* stress-rmap: rename macro CHILD_MAX to RMAP_CHILD_MAX
* Add dnotify stressor
* stress-*: voidify calls to setpgid
* thrash: remove ptrace waits, not really required
* thrash: use more standand %jx to scan in memory sizes
* thrash: remove debug messages
* manual: fix missing escape on - in --metrics-brief
* Add --stressors option to show available stressors
* cache: ensure path is set correctly for CPUs > 0
* cache: fix FIXMEs on determining the CPU number a process is running on
* Add stress_get_cpu() helper to fetch CPU number process is running on
* manual: fix typo --stack-full should be --stack-fill
* stress-rmap: remove redundant NO_MEM_RETRIES_MAX
* stress-apparmor: another fix to signal handler comment
* stress-rmap: uncomment setpgid call
* stress-rmap: replace white spaces with tab
* Add rmap stressor
* stress-apparmor: fix comment
* stress-icmp-flood: just count number of sendto failures
* Add --thrash option. Don't use it unless you are crazy.
* debian tests: expand the SKIPPED notes on the test script
* debian test: use STRESS_NG var for stress-ng
* debian test: Use sh and make use POSIX string compare
* Add proc helper to help with init/destroy stressor helpers
* call stress_unmap_shared if share cache region allocation fails
* Add stress_map_shared helper to mmap stress-ng shared region
* generalise max proc limiting
* Factor out random stressor setting into helper function
* Factor out pathological stressor disabling into helper function
* stress-resources: declare pid if O_TMPFILE is also defined
- Changes for version 0.07.00:
* Makefile: bump version
* Make ICMP flood stressor conditional build on OS basis
* debian/rules: add hardening flags
* helper: fix white space indentation (spaces replaced by tab)
* stress-ng: bracket pid number on abort early message
* stress-userfaultfd: catch OOMs and report these as no resource issues
* stress-timer: make stress_timer_set static
* stress-sysfs: add zero byte writes to sysfs files
* stress-procfs: add zero byte writes to procfs files
* stress-icache: ensure we mprotect on page aligned boundary
* stress-opcode: unmap the shared region so we don't clobber it
* stress-ng: generalise the run-time unsupported stressor checks
* Add ICMP flood stressor
* stress-shm*: minor change to comment
* stress-rtc: fix ioctl() issues, use rtc_wkalrm for wake alarm ioctls
* stress-rtc: add padding around rtc_tm to workaround an ioctl bug
* stress-oom-pipe: fix pipe fd offset bug, causing writes to fd 0 on ppc64el
* stress-ng: fix spelling of resrouces -> resources
* stress-rtc: handle return code correctly and -EINTR aborts
- Changes for version 0.06.18:
* Makefile: bump version
* stress-resources: include alloca.h for __sun__ arch
* stress-ng: add missing break from switch on OPT_NO_RAND_SEED case
* stress-procfs/sysfs: abort rather than re-doing reads on read errors
* Add --no-rand-seed option to force reproduceable test start conditions
* stress-wcstr: use safe strlcat and strlcpy BSD* systems
* stress-str: use safe strlcat and strlcpy on *BSD systems
* stress-str: use safe strlcat and strlcpy if we have BSD string library
* Makefile: explicitly add -lc flags, stops a warning on FreeBSD builds
* stress-resources: pid variable declared only on specific builds
* stress-resources: don't build in syscall shims if we don't use them
* stress-mmapfork: set max strncat size appropriately
* Remove old deprecated --vm-stride from man page
* stress-resources: chew up less memory
* Remove resources stressor from fast test all
* stress-resources: add setpgid call
* stress-resources: try harder to terminate on SIGALRM
* Add resource stressor
-------------------------------------------------------------------
Fri Sep 23 12:42:24 UTC 2016 - mpluskal@suse.com
- Update to version 0.06.17:
* Makefile: bump version
* Update manual to explain the caveats with --perf
* perf: detect when perf counters can't be used (LP: #1626009)
- add better explanation on how to enable --perf as
an unprivileged user
- Changes for version 0.06.16:
* Makefile: bump version
* Makefile: add test-libsctp.c to make dist rule
* test-libcrypt: fix cppcheck warning
* Debian/control: add libgcrypt11-dev
* stress-procfs: clear stack before use
* manual: update date
* stress-sysfs: only report an info message on instance 0
* test-libsctp: add some checks for required macros
* sched: fix build warning when building with clang on minix
* sched: fix build warning when building with clang on minix
* stress-stack: fix build warning when building with clang on minix
* stress-mmap: fix build warning when building with clang on minix
* stress-get: fix build warning with clang on minix
* stress-sctp: add in missing --sctp-domain option, update manual
* Update net helper to add addresses, add new SCTP stressor
* Some minor cleanups to main stress-ng header, nothing major
* rename get_unsigned_long to get_uint32
* Some more 80 column source line width fixes
* stress-sysfs: use fstat rather than access on path
* stress-procfs: forgot to re-open closed file
* stress-procfs: add some illegal read calls to try to break procfs
* stress-sysfs: add some illegal read calls to try to break sysfs
* Make snapcraft confinement devmode
* Minor formatting changes to ensure 80 column wide source
* stress-tlb-shootdown: fix indentation
* stress-context: don't build with sigaltstack if minix or hurd
* stress-context: add use of sigaltstack and SS_AUTODISARM
* helper: fix indentation
* stress-opcode: fix indentation
* stress-ioprio: remove duplicate and badly indented umask() call
* stress-epoll: fix indentation on if statement
* helper: set core size to zero if possible with setrlimit
* helper: force number of cpus to be 1 if sysconf not available
* net: declare missing in6addr_any for minix
* stress-mmap: make mprotect a no-op for minix
* stress-mmap: don't use msync for minix
* stress-shm-sysv: don't use msync for minix
* stress-stack: don't use sigaltstack for minix
* sched: make this a no-op for minix
* mlock: make this a no-op for minix
* don't enable STRESS_MSYNC for minix
* don't enable STRESS_YIELD for minix
* stress-flock: don't yield if minix
* mincore: make this a no-op for minix
* madvise: this is a no-op for minix
* stress-mlock: don't build for minix
* stress-cpu: minix does not support cabsl, use cabs instead
* stress-hdd: don't do madvise for minix
* stress-get: minix does not have getpgrp()
* stress-ng.h: don't build in mlock stressor if minix
* forgot to guard MLOCK stressor with STRESS_MLOCK check
* stress-get: minix does not have getpgid()
* mounts: fix build issues for minix
* mincore: fix build warning on minix
* stress-ng.h: only include <pthread.h> if it is available
* stress-wait: cater for systems that lack WCONTINUED
* stress-sigsuspend: remove <pthread.h> header inclusion, not required
* stress-quota: make err local to each code block
* stress-quota: remove redundant err assignment
* stress-quota: rename local errno so we don't alias global errno
* stress-quota: fix cppcheck style warning
* stress-madvise: fix cppcheck style warning
* stress-clock: fix cppcheck style warning
* stress-sysfs: fix cppcheck style warning, initialize stack
* stress-ng: clarify precedence of & and ?, fixes cppcheck style warnings
* stress-handle: ensure scanf %s field is limited to avoid overruns
* Fix SunOS builds, add socket and nsl library link flags
* Use mfence instead of __sync_synchronize for gcc pre 4.2 on x86
* Makefile: explicitly specify C standard using --std=gnu99
* stress-vm: don't use binary constants, gcc may not support these
- Changes for 0.06.15:
* Makefile: bump version
* stress-af-alg: account for number of ENOENT crypto bind failures
* stress-af-alg: don't report bind on ENOENT as a failure (LP: #1617788)
- retry is performed, failures are accounted for in debug verbose -v mode
-------------------------------------------------------------------
Sat Aug 27 08:52:55 UTC 2016 - mpluskal@suse.com
- Update to version 0.06.14:
* Makefile: bump version
* stress-mmapfork: add more feedback on segv faults (LP: #1614099)
- Changes for 0.06.13:
* Makefile: bump version
* Makefile: add snapcraft into make dist
* ignite-cpu: ensure buffer is null terminated before calling strlen
* stress-affinity: only check CPU move if sched_getaffinity succeeds
* Add snapcraft packaging
* stress-seccomp: inject some random BPF op codes
* force indirect libc calls to enforce calls to libc wide str functions
* stress-str: fix incorrect order on args in call to stress funcs
* stress-str: force indirect libc calls to enforce calls to libc str
* functions
* ensure cache info is only printed once
* Manual: fix typo: build -> built
-------------------------------------------------------------------
Sat Jul 16 12:00:49 UTC 2016 - mpluskal@suse.com
- Update to version 0.06.12:
* Makefile: bump version once more
* Update manual page date since we've touched the manual
* stress-seal: don't abort fatally if memfd_create is not
available.
* fast-test-all: cater for non-fatal test exit status
* Add oom-pipe to fast-test-all exclusion list
* Manual: clarify that return code 3 could refer to missing
system call
* stress-fcntl: handle EAGAIN lock requests more robustly
* stress-fcntl: don't check initial GETLK status
* stress-icache: don't fail if advice fails on EINVAL
- Changes for version 0.06.11
* Makefile; bump version
* fast-test-all: don't run seccomp, it may not pass on some
kernels
* stress-fault: handle segfaults that occur on some BSD kernels
* stress-icache: only madvice if MADV_NOHUGEPAGE is defined
* stress-icache: don't assume that read/write/exec protection is
allowed
* Update cache-mfence helper. It supports ARM now. Zhiyi Sun
- Changes for version 0.06.10:
* Makefile: bump version again
* stress-atomic + build: the autodetect smarts did not work, fix
them
- Changes for 0.06.09:
* Makefile: bump version
* stress-atomic: don't make tmp volatile, fixes clang warnings
* Add smarts to Makefile to detect if atomic GCC functions are
supported
- Changes for 0.06.08:
* Makefile: bump version
* Manual: update date
* stress-ptrace: EINTR is not a failure on waitpid
* stress-tlb-shootdown: remove case where < 2 CPUs abort the test
* Add GCC atomic ops stressor
* stress-copy-file-range: handle ENOSPC as non-fatal
* stress-icache: call __clear_cache() between code modifications.
* Enable icache stressor for arm
* Add renameat2 to syscalls
* Add preadv2/prwritev2 to syscalls
* stress-lockbus: se GCC builtin __atomic_add_fetch to test lock
bus for ARMv6-v8.
* stress-epoll: void return on timer_settime
* Manual: update contributors, add Zhiyi Sun
-------------------------------------------------------------------
Tue Jul 12 19:05:38 UTC 2016 - mpluskal@suse.com
- Use correct rpm group
-------------------------------------------------------------------
Tue Jul 5 09:16:11 UTC 2016 - mpluskal@suse.com
- Update to version 0.06.07:
* Makefile: bump version
* stress-msg: add in IPC_INFO, MSG_INFO, MSG_STAT msgctl calls
* stress-vecmath: add more ops to make vecmath more demanding
* stress-sync-file: sync on mode rather than on the sync_modes index
* stress-opcode: use __builtin___clear_cache to avoid clang warning
* stress-get: fix typo on syscall name
* replace mfence with __sync_synchronize builtin
* stress-bigheap: remove redundant call to stress_get_pagesize
- Changes for version 0.06.07:
* Makefile: bump version
* stress-shm-sysv: don't msync on GNU HURD, it is not implemented
* stress-shm: don't msync on GNU HURD, it is not implemented
* stress-ng: build in OPT_MEMFD_BYTES case if STRESS_MEMFD defined
* manual: fcntl: add in missing locking commands
* stress-socket: add --sock-type socket type option
* Add Linux open file description locks stressor
* Add POSIX advisory locking stressor
* stress-fcntl: add more locking fcntl commands
* man page: add --taskset example
* stress-memfd: add better termination exit points, don't fail on EXNIO
* stress-memfd: add a --memfd-bytes size specifier option
* perf + Makefile: Add some smarts to detect available perf enums
* stress-shm: msync the shm region
* stress-shm-sysv: msync the shm region
* stress-memfd: add hole punching to memory
* stress-mremap: add MAP_FIXED remappings
* stress-memfd: add random madvise to add some more page stress
* stress-memfd: add seeks to memfd stressor
* stress-xattr: rename name to attrname to stop shadowing on name
* Update README stress test count
* Add in missing seccomp from the --help info
* Add a fcntl SEAL command stressor
* README: update number of tests
* time_now: return -1.0 for failed time fetch
* stress-get: add getcpu system call
* stress-dup: only close fd's that are open
- Changes for version 0.06.05:
* Makefile: bump version
* stress-mmap: ensure we don't leak fd, cleanup on exit
* fast-test-all: don't run exec test
* stress-mremap: catch SEGV and OOM restarts
* stress-mmap: catch SEGV and OOM restarts
* fast-test-all: exclude pty
* Revert "stress-mremap: add random MAP_FIXED option to mremap"
* stress-zero: #if def around ptr declarion for non-Linux systems
* stress-zero: only perform /dev/zero mmapping on Linux
* stress-cacheflush: remove sys_cacheflush for non linux systems
* stress-shm-sysv: SHM_INFO and IPC_INFO are linux only
* stress-cache: only call cacheflush on Linux systems
* stress-filename: filename option should be from the .opt field
* stress-rtc: fix some overly pedantic warnings from cppcheck
* stress-shm: sync, expand and shrink shm region, extra stress
* stress-open: use different forms of open flag combinations
* stress-zero: mmap /dev/zero and check if the contents is zero
* stress-pipe: sanity check pipe size setting
* stress-dup: add dup2 on same fd exerciser
* stress-fcntl: add some more fcntl commands
* stress-seek: add SEEK_CUR, SEEK_END seek options
* stress-utime: exercise UTIME_NOW and UTIME_OMIT settings
* stress-userfaultfd: add poll to add some more kernel coverage
* Add stress_set_nonblock to set fd to non-blocking I/O
* stress-userfaultfd: add in zeropage handling
* stress-mremap: add random MAP_FIXED option to mremap
* stress-readahead: remove redundant if defined() checks on fadvise
* Add SIGHUP trapping and send SIGALRM to all processes on death
* stress-personality: only print number of personalities in instance 0
* syscalls: update pause information
* stress-cache: use cacheflush() on systems that provide this syscall
* syscalls: update ioctl entry
* perf: add "per" / marking for per second
* Add pty stressor
* Add semtimedop to syscalls, it is present in stress-sem-sysv.c
* stress-cap: add capset call for current stressor process
* stress-shm-sysv: add some additional exercising of shmctl commands
* stress-sem-sysv: exercise more of the semctl commands
* Add trivial chown stressor
* stress-dup: use dup3() on linux if it is available
* Makefile: vecmath: make the file touch silent
* stress-key: add request_key system call
* syscalls: update pipe2 entry, this is now being exercised by
* stress-pipe
* stress-mq: memset sigev to zero
* stress-madvise: only build in if STRESS_MADVISE defined
* Add madvise stressor
* syscalls: add mq_timedsend to mq
* stress-mq: use timed and non-timed versions of send/receive
* stress-mq: add mq_notify calls every 1024 iterations
* stress-link: lstat the link
* Widen metrics dump stressor name field to 13 chars
- Changes for version 0.06.04:
* Makefile: bump version
* Makefile: remove gcc coverage build flags
- these were accidentally added in the previous release and not
removed
- Changes for version 0.06.03:
* Makefile: bump version
* stress-cap: cap data needs _LINUX_CAPABILITY_U32S_3 elements in size
* stress-nice: add some randomness to the delay to unsync nicenesses
* stress-opcode: remove white spaces
-------------------------------------------------------------------
Wed May 18 11:07:13 UTC 2016 - liedke@rz.uni-mannheim.de
- stress-ng (0.06.02-1) unstable; urgency=medium
* Makefile: bump version
* Makefile + stress-vecmath: add more smarts to detect gcc build failures
* stress-af-alg: don't fatally fail on bind on AF_ALG
* stress-af-alg: fix up error messages
* Add stackmmap stressor
* stress-stack: ensure signal handling stack is aligned
* stress-context: ensure stack is aligned to 64 byte boundaries
* stress-opcode: disable signal count tracking
* stress-opcode: clean up code a little
* Add opcode stressor
* update syscalls.txt
* stress-ioprio: perform some io writes to exercise i/o priorities
* Add ioprio stressor
- stress-ng (0.06.01-1) unstable; urgency=medium
* Makefile: bump version
* stress-af-alg: avoid any unterminated strings (unlikely)
* debian/control: add libcap-dev to Build-Depends
* stress-hdd: should use SIZEOF_ARRAY instead of sizeof
* stress-full: don't close fd before trying a read
* stress-af-alg: ensure the rng read size is correct
* stress-af-alg: fix more -ve fd closes
* stress-af-alg: don't close fd that is -ve
* stress-tlb-shootdown: fix incorrect comparison on ENOMEM
* stress-af-alg: check for errors on setsockopt
* stress-full: try read test rather than skip if write fails
* stress-full: clear buffer before we write
- stress-ng (0.06.00-1) unstable; urgency=medium
* Makefile: new major version and codename
* stress-msync: cast off_t to intmax_t to print with %jd format specifier
* debian/control: update Standards Version to 3.9.8
* manual: update date
* stress-msync: add in conditional STRESS_MSYNC build check
* stress-af-alg: add simple rng to the mix
* stress-af-alg: remove redundant type field info
* manual: rephrase the --seq description
* manual: clean up the SEE ALSO section
* Add TLB shootdown stressor
* stress-af-alg: remove (void)name
* Add /dev/full stressor
* stress-urandom: where possible also read data from /dev/random
* Manual: update af-alg skciper section.
* stress-hdd: work through all the --hdd-opts if --maximize is enabled
* stress-xattr: fix error messages, they were reporting wrong syscall
* stress-af-alg: use array size so we don't need NULL sentinels
* stress-af-alg: Add skcipher stessing
* stress-procfs: add /proc/tty, /proc/self, /proc/thread_self
* stress-key: Add some more keyctl calls
* Rename stressor names to match their command line name
* Add msync stressor
* Fix non-Linux build for set_cpu_affinity
* stress-rtc: also read /proc/driver/rtc
* Add RTC stressor
* stress-get: use prlimit only with glibc >= 2.13.0
* stress-procfs: add more /proc directory traversal
* stress-inotify: add ioctl FIONREAD to peek at available data on fd
* Add the CPU affinity option '--taskset'
* stress-cache: make pinned a linux only variable
* stress-cache: fix pinned message, swap cpu and instance around
* stress-cache: fix failure to build on GNU/HURD
* Update contributions authors in manual
* Ensure processes are kept to the CPU affinity set
* taskset -c 4-7 stress-ng --cache 4 --stream 4 --yield 4
* Update README with other OS build notes
* stress-spawn: make this a Linux only test
* Disable MLOCKED sections for now on SunOS, we get linker issues
* stress-ng: correct casts of void *
* stress-ng: include alloca.h for SunOS
* stress-ng: cater for systems that don't support RLIMIT_NPROC
* mincore: cater for SunOS mincore API difference
* stress-yield: correct casts of void *
* stress-yield: include alloca.h for SunOS
* stress-vm: correct casts of void *
* stress-stream: correct casts of void *
* stress-str: include strings.h for SunOS builds for index() prototype
* stress-stack: include alloca.h for SunOS
* stress-sigsuspend: correct casts of void * and uint64_t *
* stress-mmapmany: correct casts of void * and uint8_t *
* stress-mmap: correct casts of void * and uint8_t *
* Fix alignment mask to ensure stacks are 16 byte aligned (LP: #1573117)
* stress-mlock: correct casts of void * and uint8_t *
* stress-icache: cast addr to (void *) in mprotect calls
* mounts: SunOS requires *BSD style build arrangements
* stress-hdd: cast data to (void *) to silence warning
* stress-hdd: don't use futimes for Solaris UNIX
* Add logging to syslog of free memory info post-OOM
* Add system and memory syslog logging
* stress-brk: catch EAGAIN errors on sbrk/brk
* Remove debug log test message
* stress-socket-fd: only build stressor if STRESS_SOCK_FD defined
* Add logging of who and how stress-ng was invoked to syslog
- stress-ng (0.05.25-1) unstable; urgency=medium
* Makefile: bump version
* debian/control: update standards version to 3.9.7
* Ensure all clone() calls are 16 byte aligned for aarch64 (LP: #1573117)
- stress-ng (0.05.24-1) unstable; urgency=medium
* Makefile: bump version
* stress-mmap: handle SIGBUS signals (LP: #1569468)
* stress-mmapmany: sanity check sysconf return
* stress-mmapmany: detect SEGV deaths
* stress-mlock: detect SEGV deaths
* stress-brk: detect SEGV deaths
* stress-bigheap: detect SEGV deaths
* stress-memfd: detect SEGV deaths
* stress-mmapmany: allocate mappings on heap rather than stack
* stress-mlock: allocate mappings on heap rather than stack
* stress-cpu: move sieve buffer to static to reduce stack size
* stress-sem*: differentiate between which semaphore init that failed
* stress-remap-file-pages: abort if remap fails
* stress-fiemap: remove \n from pr_fail_err messages
-------------------------------------------------------------------
Tue Apr 12 07:07:18 UTC 2016 - liedke@rz.uni-mannheim.de
- stress-ng (0.05.23-1) unstable; urgency=medium
* Makefile: bump version
* stress-aio: fix segfault on --maximumize option (LP: #1568335)
* stress-chmod: just instance 0 should create the file (LP: #1568333)
- stress-ng (0.05.22-1) unstable; urgency=medium
* Makefile: bump version
* stress-af-alg: retry open if we get EAFNOSUPPORT (LP: #1564786)
- stress-ng (0.05.21-1) unstable; urgency=medium
* Makefile: bump version
* Add test-cap.c to Makefile dist rule
* debian: tests: don't run remap stressor
* stress-ng: add klog (syslog) stressor
* syscalls: add remap_file_pages
* Add page remapping stressor
* stress-pthread: Add get_robust_list call
* stress-sysinfo: exercise fstatfs()
* Move wcs options to correct postion in manual
* Add the sync-file stressor
* Add fp-error stressor
* syscalls.txt: update some missing syscalls and some re-ordering
* Add sys/capability.h and capget build time checks
* stress-get: add prlimit
* Update syscalls.txt with capget stressor
* Add capabilities stressor
- stress-ng (0.05.20-1) unstable; urgency=medium
* Makefile: bump version
* stress-getdent: fix build warnings on systems with no getdents syscalls
* Manual: update date
* Debian/changelog: fix spelling mistake
* stress-udp: fix two warnings on uninitialised addr
* stress-socket-fd: fix two scan-build warnings
* stress-getdent: init ret to -ENOSYS, fix scan-build warning
* Use the generic signal handler helpers
* helper: add generic signal handling/restoring helper functions
* stress-oom-pipe: use stress_get_file_limit
* stress-open: use stress_get_file_limit
* stress-dup: use stress_get_file_limit
* stress-socket-fd: use stress_get_file_limit
* helper: add stress_get_file_limit to get max open files allowed
* Add sockfd stressor
* Add getdent stressor
* stress-filename: use strncpy rather than strcpy
* stress-qsort: use calloc
* stress-cpu: zeta method should be counting in integers
* stress-mergesort: use calloc
* stress-heapsort: use calloc
* stress-bsearch: use calloc
- stress-ng (0.05.19-1) unstable; urgency=medium
* Makefile: bump version
* stress-switch: don't initialize buf_size twice
* stress-ng: don't stress-sleep options unless STRESS_SLEEP defined
* stress-shm-sysv: comparing j < i - 1 is incorrect when i = 0
* stress-shm-sysv: parent should close read end of pipe
* stress-context: make stacks larger, avoid segfault on kFreeBSD
* stress-oom-pipe: handle condition where pipe size can't be set
* stress-pipe: use O_DIRECT when possible
* stress-switch: use O_DIRECT with 1 byte buffer is possible
* stress-oom-pipe: ensure sz is set before we check it against prev_sz
* Add stress-oom-pipe pipe buffer stressor
* helper: fix comment on system_read()
* stress-fallocate: add in default mode 0
* stress-iosync: fix build warning when using old glibc:
* stress-fstat: add blacklist of paths not to open/fstat/close
* correctly spell stress_adjust_pthread_max
* stress-str: make some statics into static const
* stress-socket: make socket_opts static const
* stress-maxtrix: make some statics static const
* stress-vm: make some statics static const
* stress-wcstr: make variables static const
* stress-get: make priorities static const
* stress-filename: make filename_opts static const
* stress-dentry: make dentry_removals static const
* stress-cpu: make some variables static const
* stress-clone: make flags and unshare flags static const
* stress-chmod: make modes static const
* perf: make perf_tp_info static const
* cache: make struct generic_map const
* helper: make stress_temp_path static const
* stress-udp-flood: make data static const
* stress-spawn: make exec strings static
* Only define OPT_PTHREAD* macros if STRESS_PHREAD is defined
* Minor #define changes, no functional change
* stress-cpu: remove redundant initialisation of last_e
* stress-cpu: don't build _Decimal stressors with clang
* stress-shm-sysv: set entire shm_ids array to -1
* stress-fork: make child exit immediately and stash pid only in parent
* stress-xattr: free buffer on error exit path
* stress-timerfd: fix timer thresholding check
* Add sleep stressor
* stress-clock: add some comments and make source 80 column friendly
* bigheap: reorder some variables on the stack for better packing
* Add whitespace in return statement
* thermal-zone: minor clean up
* net: make loop iterator size_t
* cache: minor code tweaks, no functional changes
* cache: rework get_contents error return paths
* cache: reformat function declarations to match the stress-ng code style
* clean up and rename macro mk_path to MK_PATH
* Ensure we do not under run string buffer
* Add apparmor_parser excutable check
* time: make source 80 column friendly
* thermal-zone: make source 80 column friendly
* sched: make source 80 column friendly
* perf: make source 80 column friendly
* mlock: make source 80 column friendly
* limit.c: remove redundant #includes
* io-priority: make source 80 column friendly
* ignite-cpu: make source 80 column friendly
* Include stress-ng.h first for __kernel_long_t and __kernel_ulong_t
-------------------------------------------------------------------
Sat Feb 20 13:28:16 UTC 2016 - liedke@rz.uni-mannheim.de
stress-ng (0.05.18-1) unstable; urgency=medium
* Makefile: bump version
* stress-eventfd: fix incorrect return check on eventfd (LP: #1547450)
* stress-mknod: fix == comparison on errno (LP: #1547446)
* stress-tee: catch EINTR in splice() calls (LP: #1547434)
stress-ng (0.05.17-1) unstable; urgency=medium
* Makefile: bump version
* stress-aio: don't cancel the signal handler before exiting (LP: #1547108)
* stress-lockf: don't return failure if we get a timeout (LP: #154107)
* stress-aio: don't return failure if we get a timeout (LP: #1547090)
* Check for ENOMEM ENOSPC errors during init (LP: #1547062)
* make stress_temp_dir_mk and stress_temp_dir_rm return -errno on failure
* stress-dentry: fix file striding on clean-up (LP: #1547004)
* Add stress_get_prime64 to stress-ng header
* Add stress_get_prime64 to find a prime for filename striding
* typedef possibly missing __kernel_long_t and __kernel_ulong_t
* Add <linux/posix_types.h> for linux builds
* stress-aio-linux: fix clang scan-build warning
* Makefile: only do build time config detection when building target
stress-ng (0.05.16-1) unstable; urgency=medium
* Makefile: bump version
* Makefile: add test-libaio.c to dist rule
* stress-seccomp: EINTR on waitpid is not a failure, so ignore it
* stress-numa: aborted test should not be a failure, nothing got tested
* stress-quota: check for EPERM, abort if we don't have permission
* stress-kcmp: check for EPERM, abort if we don't have permission
* debian/control: add libaio-dev dependency
* stress-aio: use aiolib instead of direct system calls
* Catch faults in child stressor and flag them as a fatal failure
* stress-socket: only build in sendmmsg test for glibc 2.14 or higher
* stress-iosync: build in syncfs call for glibc 2.14 or higher
* Add detection for <linux/seccomp.h>
* stress-handle: only build in if we have glibc 2.14 or higher
* ignite-cpu: don't print failure message as inf, make it dbg
* stress-malloc: calloc'd size is too big, fix the size (LP: #1544575)
* mincore: page align address of buffer before passing it to mincore
-------------------------------------------------------------------
Thu Feb 11 08:38:49 UTC 2016 - liedke@rz.uni-mannheim.de
stress-ng (0.05.15-1) unstable; urgency=medium
* Makefile: bump version
* fast-test-all: add pass/fail summary at end
* fast-test-all: fix typo, socket-pair should be sockpair
* stress-handle: specify width of integer in sscanf
* Manual: expand the error exit code notes
* stress-qsort: cast data to (uint8_t *) to stop static analysis warnings
* stress-hdd: close file on a fstat failure
* stress-futex: add backoff delay if futex is too much in contention
* stress-sendfile: ignore EINTR on sendfile calls
* stress-readahead: handle -ENOSPC as a non-failure condition
* stress-vm-rw: re-organise the code into parent/child helpers
* stress-userfaultfd: set stack size to be STACK_SIZE
* stress-hdd: handle -ENOSPC as a non-failure condition
* adt: remove socket-pair from tests
* cache helper: output cache allocation size
* stress-cpu-online: only report root requirement on instance 0
* stress-cpu-online: Don't report a failure if not run as root
* Add L before cache level to make the debug less abstract
* stress-denty: ENOSPC should not be a fatal error that stops the test
* Fix -x option, compare munged strings to treat '_' like '-'
* Ensure pathological class is disabled if we don't enable --pathological
* stress-zlib: fix comparison which should not be an assignment
* helper: fix double free on error exit
stress-ng (0.05.14-1) unstable; urgency=medium
* Makefile: bump version
* Fix make dist - typo in test-libpthread.c
* stress-fiemap: initialise counter at start of loop
* stress-fiemap: ensure counter is being updated
* adt: exclude bind mount from list of stressors
* Don't emit warning on --pathological if number of stressors is zero
* ignite-cpu: add null entry at end of list, don't scan by array size
* Only include <sys/mount.h> for linux for the bind mount stressor
* stress-bind-mount: build stressor if STRESS_BIND_MOUNT defined
* stress-bind-mount: stop cppcheck whining about uninitialised pid
* stress-numa: don't fatally fail on -EIO with MPOL_MF_STRICT (LP: #1542741)
* Enabled IGNITE_CPU with the --aggressive option
* Add bind-mount stressor (LP: #1542010)
* Add --ignite-cpu option to maximize CPU frequency
* Make float decimal auto detect set -DHAVE_FLOAT_DECIMAL
* Minor re-org of Makefile, and add more files to dist rule
* Update README - increase number of stressors
* adt tests: remove membarrier, it fails on older kernels in Debian
* Add some more comments
* stress-affinity: handle EINVAL when CPU(s) are offline
* Set number of instances to on-line CPUs if N is -ve (LP: #1513546)
* Remove opt_long, replace with get_int32 or get_uint64
* Add libpthread build time checks
* Add librt build time checks
* Remove commented out old link line
* Add libcrypt check
* Makefile: remove test-libz correctly
* stress-cpu: make source 80 column friendly
* Add FORCE_DO_NOTHING macro do force compiler to stop opimizing out loops
* Add zlib stressor
* stress-stream: cater for systems without L3 cache
* stress-stream: only emit cache size info on instance 0
* Add libbsd-dev to README
stress-ng (0.05.13-1) unstable; urgency=medium
* Makefile bump version
* Makefile: add test-libbsd.c to dist rule
* adt: Bar a few more tests that can be problematic on different arches
* stress-fifo: don't return and error status if we have to abort early
* Exclude tests that may fail because system calls not fully implemented
* Build stress-mergesort if STRESS_MERGESORT is defined
* Built stress-heapsort if STRESS_HEAPSORT is defined
* Make *put globals volatile to force gcc to compute values
* Add BSD mergesort stressor
* Add BSD heapsort stressor
* madvise: add MADV_FREE
* stress-vm-rw: don't close already closed pipe ends
* stress-vm: just one top level iteration in rowhammer method
* Use MAP_SHARED where appropriate
* stress-qsort: fix typo in comment SIGARLM -> SIGALRM
* Makefile: call make using $(MAKE)
* stress-apparmor: reduce scope of ret
* stress-shm: reduce the scope of variable n
* stress-shm-sysc: reduce scope of variable n
stress-ng (0.05.12-1) unstable; urgency=medium
* Makefile: bump version
* cache: memset globbuf, work around clang warnings
* stress-cpu-online: free cpu_online on error return
* fast-test-all: use the -v verbose flag
* fast-test-all: Don't yet test copy-file
* stress-copy-file: only build if syscall is supported
* Change type of error messages in cache helper
* cache: use %zd format specifier for size_t
* cache: make source 80 column friendly
* fast-test-all: return with error exit status
* Tweak man page exit status table
* Exit with status 2 if a stressor failured
* Change mini help text to make it consistent
* Add cpu-online to mini help
* stress-cache: cater for non-powers of 2 cache size
* Remove hard #undef __linux__ used during debugging
* Re-work shared cache buffer allocation
* stress-memcpy: fix segfault due to changes in allocation of cache buffer
* Add kcmp to exclude list on adt test
* Add cpu-online to exclude list on adt test
* Make some helpers return int32_t rather than long
* Add WARN_UNUSED macro and use it against functions that need return checks
* Add CPU online stressor
* Fix indentation issue after --hdd
stress-ng (0.05.11-1) unstable; urgency=medium
* Makefile: bump version
* stress-stream: make L3 a uint64_t
* stress-clock: fix build warning on non-Linux systems
* stress-stream: fix FTBFS on non-Linux systems
stress-ng (0.05.10-1) unstable; urgency=medium
* Makefile: bump version
* stress-stream: use new cache probing api
* Add James Hunt to contributors in man page
* cache: constify a few args and (void) fclose returns
* Makefile: re-order cache.c in source list
* stress-cache: make source 80 col friendly, use name instead of __func__
* Removed bogus check.
* Reduce cache level to maximum available if specified too high.
* New function to check max cache level. Also, reduced variable scope.
* Merge branch 'master' into cache-handling
* Rather than failing, display a message and fall back to defaults.
* Reduce variable scope and remove redundant assignment.
* stress-copy-file: off_t should be loff_t
* Remove debug forced enabled of stress-file-copy
* Merge branch 'master' into cache-handling
* Add --cache-level=, --cache-ways=, and --cache-no-affinity to man page.
* Add linux guard for cpu cache function prototypes.
* Handle systems not providing cache details via sysfs
* Dispense with cache.h.
* get_contents(): Fixed resource leak.
* Add --copy-file copy_file_range() stress test
* Fix spelling mistake of "bandwidth"
* Fix spelling mistake of "weird" in comment
* man page: Fix formatting on vm stressor method table
* Fixes for building on non-Linux platforms.
* Add Linux support to specify cache type and size.
* Fix column width of vm-method options
* Fix column width of stream option description
stress-ng (0.05.09-1) unstable; urgency=medium
* Makefile: bump version
* Fix incorrect position of \ in man page
* stress-udp: fix UDP-Lite enable options
* stress-af-alg: don't build for non-Linux systems
* stress-udp: add error checking to setsockopt calls
* Add auto detection of xattr.h to avoid build failures
* Add auto detection of keyutils.h to avoid build failures
* stress-numa: prefix abort message with stressor name
* stress-udp: in UDP-Lite mode, limit checksum to 8 byte UDP header
* Fix formatting of --hdd-opts in man page
* Add --seek-punch option to punch holes in seek file
* Add UDP-Lite option --udp-lite
* Align bitfields in flags
* stress-socketpair: handle ENFILE errors more gracefully
* stress-filename: only emit filename information on instance 0
* Add fiemap stressor
* stress-stream: kludge around a false positive from static analysis
* Add --stream-l3-size option to specify stream L3 CPU cache size
* stress-unshare: don't complain on -EINVAL
* stress-stream: remove extraneous space between cache size and K
* Use RESTRICT macro as an alias for __restict
* Add stream memory bandwidth and computation stressor
* Add 8 more bits to OPT_FLAGS
* stress-aio: remove unused typedef
* refactor random string filling using stress_strnrnd()
* Add AF_ALG socket domain (hash) tester
* Add more tracing perf events to --perf output
stress-ng (0.05.08-1) unstable; urgency=medium
* Makefile: bump version
* Remove stress-leak.c, it was accidentally added
* Update man page date
* Debian control: Use dh_apparmor
* Fix incorrectly placed #endif around TSEARCH
* stress-iosync: (void)name if not building for Linux
* stress-mlock: remove debug message
* Add in options to *search stressors in mini built-in help
* Add TSC read stressor
* Remove some redundant (void)var statements
* stress-get: rename gettid to sys_gettid to avoid name clash
* Move uint64_put and double_put from helper.c to stress-ng.h
* Rename macros STRESS_{MIN|MAX} -> STRESS_{MINIMUM|MAXIMUM}
* Update debian copyright to 2016
* Update copyright year to 2016
* stress-iosync: don't close -ve fd
stress-ng (0.05.07-1) unstable; urgency=medium
* Makefile: bump version
* stress-yield: include signal.h to build on FreeBSD
* Exclude stressors that cannot be run
* stress-matrix: add copy and mean methods
* stress-yield: ensure at least 2 child processes per CPU
* Update syscalls.txt with syncfs
* stress-key: remove if def'd debug code
* stress-iosync: add syncfs() for Linux only
* Add --sock-nodelay option to disable the Nagle algorithm
* stress-socket: split out client/server code into separate functions
* stress-exec: remove (void)name;
* stress-dentry: add 'random' ordering option
* stress-affinity: set initial cpu to instance number
* stress-clock: output name of clock timer id on error
* Add --temp-path option
* Debian/control: change priority because of apparmor dependency
* Add apparmor to excluded adt tests
* Add sendmsg and sendmmsg to syscalls.txt
* Add --sock-opts option
stress-ng (0.05.06-1) unstable; urgency=medium
* Makefile: bump version
* Makefile + stress-apparmor: generate binary data using od and sed
stress-ng (0.05.05-1) unstable; urgency=medium
* Makefile: bump version
* Makefile: --no-print-directory is required when make calls itself
* Add apparmor as a build dependency
* Makefile: Add test-apparmor.c usr.bin.pulseaudio.eg to make dist dist
* stress-seccomp: stop build warnings on systems without seccomp
* Ensure test-appormor build test covers the aa API
* Remove mwc_seed from mwc.c
* Add load average stats to --times option
* inline mwc_seed, faster and shrinks text size a bit
* stress-apparmor: perform some more devious corruption actions
* Debian: control: dependency should be libapparmor-dev
* stress-spawn: move spawn_calls to correct accounting stats
* Add a posix-spawn stressor
* Add unshare stressor
* stress-shm-sysv: ensure all shm_ids are initialised to -1
* Update Makefile to autogenerate AppArmor binary blob
* stress-apparmor: add some random bit corruption
* stress-apparmor: add profile add/replace/remove stressing
* Debian: control: add libapparmor1 dependency
* stress-apparmor: #if def global vars
* README: Add note about requiring GNU make
* Add initial simple AppArmor test, more features later
stress-ng (0.05.04-1) unstable; urgency=medium
* Makefile: bump version
* stress-userfaultfd: fix 32 bit build warning
* stress-shm: replace strides of 4096 with page size
* stress-shm-sysv: replace strides of 4096 with page size
* stress-mremap: replace strides of 4096 with page size
* stress-mmap: replace strides of 4096 with page size
* stress-bigheap: make stride the page size
* parse-opts: ensure_positive: don't reassign ptr twice
* stress-daemon: close dup'd fds on exit
* Add daemon stressor
* Move set_proc_name into helper, remove proc-name.c
* helper: make timer slack also depend on __linux__
* stress_mlock_region: constify args
* stress_get_stack_direction: constify arg
* Remove coredump, merge functionality into helper
* Update README
* syscalls: add mlock2
* stress-mlock: add support for mlock2
* stress-aio: clear io_reqs before use and disable handler later
* stress-rename: rename between directories
stress-ng (0.05.03-1) unstable; urgency=medium
* Makefile: bump version
* stress-seccomp: avoid build failures on arm64 targets
stress-ng (0.05.02-1) unstable; urgency=medium
* Makefile: bump version
* stress-get: define _DEFAULT_SOURCE to stop gcc 5.2.1 warnings
* Add new seccomp stressor
* stress-mmap: fix thinko, init no_mem_retires in correct place
* stress-shm-sysv: add more allocation smarts
* stress-shm-sysv: add mmap failure abort and OOM counting
* stress-shm: add mmap failure abort and OOM counting
* stress-seek: set a useable upper seek limit for 32 bit arches
* stress-mmap: add mmap retry mechanism if we can't mmap memory
* stress-memfd: trap SIGBUS as well as SIGKILL for OOM catching
* stress-vm: add spacing on OOM restarts message
* stress-malloc: add spacing on OOM restarts message
* stress-memfd: add spacing on OOM restarts message
* stress-vm: add mmap retry mechanism if we can't mmap memory
* refactor stack direction checking function
* stress-personality: fix warning on %lu being used on a size_t
* stress-ptrace: re-enable this stressor and fix up pr_failed_* macro
* Enable personality stressor
stress-ng (0.05.01-1) unstable; urgency=medium
* Makefile: bump version
* stress-shm: break out of loops when ok is false
* stress-fcntl: make F_SETOWN and F_GETOWN linux only for now
* helper: fix warning on FreeBSD, unused args caused warnings
* stress-switch: force more context switches
* stress-pipe: add pipe-data-size and pipe-size options
* stress-seek: only report error if SEEK_DATA/SEEK_HOLE supported
* stress-seek: add SEEK_DATA and SEEK_HOLE seeks
* syscalls.txt: add new userfaultfd syscall
* Manual: note that userfaultfd is only for Linux
* Add new userfaultfd stressor
* stress-membarrier: rename pr_failed_err -> pr_fail_err
* stress-cpu: force more jmps in cpu-jmp method
* stress-brk: add occasional brk shrink to add a bit more variety
* stress-shm-sysv: use some more random shm flags
* stress-mmap: use some more random mmap flags
* stress-fallocate: add some more fallocate modes
* Rename pr_failed_* macros to pr_fail
* log: rename logging functions
* log: don't be silent when we have failure messages
* stress-filename: Add more error handling feedback
* Update debian/rules: enable debian build flags
* Fix buffer not null terminated error with strncpy
* Add filename stressor
* Add --timer-slack option to adjust timer slackness
* disable core dump via prctl() to avoid massive core files
* Signal to child processes if parent has died.
* log: make variables static
stress-ng (0.05.00-1) unstable; urgency=medium
* Makefile: bump version to 0.05.00, update codename
* man page: fix wrapped line so 'lsearch' is not seen as a macro
* shm stressors: make final write failures a debug message
* shm stressors: exit child stressor if pipe write fails
* Add POSIX shared memory stressor
* stress-qsort: fix resource leak on error return path
* man page: make it 80 column tty friendly
* stress-qsort: bail out when SIGALRM triggers
* stress-rlimit: disable handlers once we finish to avoid setjmp looping
* log: remove debug cruft
* Add --log-file logging option
* stress-sem*: remove ; after while loop
* stress-icache: force cache clear using __clear_cache
* Make source more 80 column friendly
* manual: clarify number of cpus
* madvise: fix typo
* stress-shm-sysv: make shm cleanup robust
* stress-ng: remove setpgrp() calls
* stress-sem-sysv: handle signal during setup phase correctly
* stress-sem: handle signal during setup phase correctly
* fix -k option: it does not require a parameter
* stress-procfs: use non-blocking open
-------------------------------------------------------------------
Wed Nov 11 21:45:41 UTC 2015 - mardnh@gmx.de
- initial package
Reference in New Issue View Git Blame Copy Permalink