strongswan/strongswan.spec

1011 lines
38 KiB
RPMSpec
Raw Normal View History

#
# spec file for package strongswan
#
# Copyright (c) 2018 SUSE LINUX GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
Name: strongswan
Accepting request 521273 from home:ndas:branches:network:vpn - Updated to strongSwan 5.6.0 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures, which requires decryption with the operation m^e mod n, where m is the signature, and e and n are the exponent and modulus of the public key. The value m is an integer between 0 and n-1, however, the gmp plugin did not verify this. So if m equals n the calculation results in 0, in which case mpz_export() returns NULL. This result wasn't handled properly causing a null-pointer dereference. This vulnerability has been registered as CVE-2017-11185. (bsc#1051222) *New SWIMA IMC/IMV pair implements the draft-ietf-sacm-nea-swima-patnc Internet Draft and has been demonstrated at the IETF 99 Prague Hackathon. *The IMV database template has been adapted to achieve full compliance with the ISO 19770-2:2015 SWID tag standard. *The pt-tls-client can attach and use TPM 2.0 protected private keys via the --keyid parameter. *By default the /etc/swanctl/conf.d directory is created and *.conf files in it are included in the default swanctl.conf file. *The curl plugin now follows HTTP redirects (configurable via strongswan.conf). *The CHILD_SA rekeying was fixed in charon-tkm and the behavior is refined a bit more since 5.5.3 *libtpmtss supports Intel's TSS2 Architecture Broker and Resource Manager interface (tcti-tabrmd). * more on https://wiki.strongswan.org/versions/66 OBS-URL: https://build.opensuse.org/request/show/521273 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=104
2017-09-05 17:38:01 +02:00
Version: 5.6.0
Release: 0
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%define upstream_version %{version}
%define strongswan_docdir %{_docdir}/%{name}
%define strongswan_libdir %{_libdir}/ipsec
%define strongswan_configs %{_sysconfdir}/strongswan.d
%define strongswan_datadir %{_datadir}/strongswan
%define strongswan_plugins %{strongswan_libdir}/plugins
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%define strongswan_templates %{strongswan_datadir}/templates
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if 0
%bcond_without tests
%else
%bcond_with tests
%endif
%if 0%{suse_version} > 1310
%bcond_without fipscheck
%else
%bcond_with fipscheck
%endif
%ifarch %{ix86} ppc64le
%bcond_without integrity
%else
%bcond_with integrity
%endif
%if 0%{suse_version} > 1110
%bcond_without farp
%bcond_without afalg
%bcond_without mysql
%bcond_without sqlite
%bcond_without gcrypt
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%bcond_without nm
%else
%bcond_with farp
%bcond_with afalg
%bcond_with mysql
%bcond_with sqlite
%bcond_with gcrypt
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%bcond_with nm
%endif
%if 0%{suse_version} > 1220
%bcond_without systemd
%else
%bcond_with systemd
%endif
Summary: IPsec-based VPN solution
License: GPL-2.0+
Group: Productivity/Networking/Security
Url: http://www.strongswan.org/
Requires: strongswan-ipsec = %{version}
Source0: http://download.strongswan.org/strongswan-%{upstream_version}.tar.bz2
Source1: http://download.strongswan.org/strongswan-%{upstream_version}.tar.bz2.sig
Source2: %{name}.init.in
Source3: %{name}-%{version}-rpmlintrc
Source4: README.SUSE
Source5: %{name}.keyring
%if %{with fipscheck}
Source6: fipscheck.sh.in
Source7: fips-enforce.conf
%endif
Patch1: %{name}_modprobe_syslog.patch
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
Patch2: %{name}_ipsec_service.patch
%if %{with fipscheck}
Patch3: %{name}_fipscheck.patch
Patch4: %{name}_fipsfilter.patch
%endif
Accepting request 513652 from home:ndas:branches:network:vpn - Updated to strongSwan 5.3.5 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures. More specifically, mpz_powm_sec() has two requirements regarding the passed exponent and modulus that the plugin did not enforce, if these are not met the calculation will result in a floating point exception that crashes the whole process. This vulnerability has been registered as CVE-2017-9022. Please refer to our blog for details. *Fixed a DoS vulnerability in the x509 plugin that was caused because the ASN.1 parser didn't handle ASN.1 CHOICE types properly, which could result in an infinite loop when parsing X.509 extensions that use such types. This vulnerability has been registered as CVE-2017-9023. Please refer to our blog for details. *The behavior during IKEv2 CHILD_SA rekeying has been changed in order to avoid traffic loss. When responding to a CREATE_CHILD_SA request to rekey a CHILD_SA the responder already has everything available to install and use the new CHILD_SA. However, this could lead to lost traffic as the initiator won't be able to process inbound packets until it processed the CREATE_CHILD_SA response and updated the inbound SA. To avoid this the responder now only installs the new inbound SA and delays installing the outbound SA until it receives the DELETE for the replaced CHILD_SA. *The messages transporting these DELETEs could reach the peer before packets sent with the deleted outbound SAs reach it. To reduce the chance of traffic loss due to this the inbound SA of the replaced CHILD_SA is not removed for a configurable amount of seconds (charon.delete_rekeyed_delay) after the DELETE has been processed. *The code base has been ported to Apple's ARM64 iOS platform, which required several changes regarding the use of variadic functions. This was necessary because the calling conventions for variadic and regular functions are different there. This means that assigning a non-variadic function to a variadic function pointer, as we did with our enumerator_t::enumerate() implementations and several callbacks, will result in crashes as the called function accesses the arguments differently than the OBS-URL: https://build.opensuse.org/request/show/513652 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=99
2017-08-01 09:21:05 +02:00
Patch5: 0005-ikev1-Don-t-retransmit-Aggressive-Mode-response.patch
Patch6: 0006-fix-compilation-error-by-adding-stdint.h.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build
BuildRequires: bison
BuildRequires: curl-devel
BuildRequires: flex
BuildRequires: gmp-devel
BuildRequires: gperf
BuildRequires: libcap-devel
BuildRequires: libopenssl-devel
BuildRequires: libsoup-devel
BuildRequires: openldap2-devel
BuildRequires: pam-devel
BuildRequires: pcsc-lite-devel
BuildRequires: pkg-config
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with mysql}
BuildRequires: libmysqlclient-devel
%endif
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with sqlite}
BuildRequires: sqlite3-devel
%endif
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with gcrypt}
BuildRequires: libgcrypt-devel
%endif
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with nm}
BuildRequires: NetworkManager-devel
%endif
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with systemd}
%{?systemd_requires}
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%endif
BuildRequires: iptables
%if %{with systemd}
%{!?_rundir: %global _rundir /run}
%{!?_tmpfilesdir: %global _tmpfilesdir /usr/lib/tmpfiles.d}
%else
%{!?_rundir: %global _rundir /var/run}
%endif
BuildRequires: autoconf
BuildRequires: automake
%if %{with fipscheck}
BuildRequires: fipscheck
%endif
BuildRequires: libtool
%description
StrongSwan is an IPsec-based VPN solution for Linux.
* Implements both the IKEv1 and IKEv2 (RFC 4306) key exchange protocols
* Fully tested support of IPv6 IPsec tunnel and transport connections
* Dynamic IP address and interface update with IKEv2 MOBIKE (RFC 4555)
* Automatic insertion and deletion of IPsec-policy-based firewall rules
* Strong 128/192/256 bit AES or Camellia encryption, 3DES support
* NAT Traversal via UDP encapsulation and port floating (RFC 3947)
* Dead Peer Detection (DPD, RFC 3706) takes care of dangling tunnels
* Static virtual IP addresses and IKEv1 ModeConfig pull and push modes
* XAUTH server and client functionality on top of IKEv1 Main Mode authentication
* Virtual IP address pool managed by IKE daemon or SQL database
* Secure IKEv2 EAP user authentication (EAP-SIM, EAP-AKA, EAP-MSCHAPv2, etc.)
* Optional relaying of EAP messages to AAA server via EAP-RADIUS plugin
* Support of IKEv2 Multiple Authentication Exchanges (RFC 4739)
* Authentication based on X.509 certificates or preshared keys
* Generation of a default self-signed certificate during first strongSwan startup
* Retrieval and local caching of Certificate Revocation Lists via HTTP or LDAP
* Full support of the Online Certificate Status Protocol (OCSP, RCF 2560).
* CA management (OCSP and CRL URIs, default LDAP server)
* Powerful IPsec policies based on wildcards or intermediate CAs
* Group policies based on X.509 attribute certificates (RFC 3281)
* Storage of RSA private keys and certificates on a smartcard (PKCS #11 interface)
* Modular plugins for crypto algorithms and relational database interfaces
* Support of elliptic curve DH groups and ECDSA certificates (Suite B, RFC 4869)
* Optional built-in integrity and crypto tests for plugins and libraries
* Linux desktop integration via the strongSwan NetworkManager applet
This package triggers the installation of both, IKEv1 and IKEv2 daemons.
%package doc
- Updated to strongSwan 4.6.1 release: Changes in 4.6.1: - Because of changing checksums before and after installation which caused the integrity tests to fail we avoided directly linking libsimaka, libtls and libtnccs to those libcharon plugins which make use of these dynamiclibraries. Instead we linked the libraries to the charon daemon. Unfortunately Ubuntu 11.10 activated the --as-needed ld option which discards explicit links to dynamic libraries that are not actually used by the charon daemon itself, thus causing failures during the loading of the plugins which depend on these libraries for resolving external symbols. - Therefore our approach of computing integrity checksums for plugins had to be changed radically by moving the hash generation from the compilation to the post-installation phase. Changes in 4.6.0: - The new libstrongswan certexpire plugin collects expiration information of all used certificates and exports them to CSV files. It either directly exports them or uses cron style scheduling for batch exports. - Starter passes unresolved hostnames to charon, allowing it to do name resolution not before the connection attempt. This is especially useful with connections between hosts using dynamic IP addresses. Thanks to Mirko Parthey for the initial patch. - The android plugin can now be used without the Android frontend patch and provides DNS server registration and logging to logcat. - Pluto and starter (plus stroke and whack) have been ported to Android. - Support for ECDSA private and public key operations has been added to the pkcs11 plugin. The plugin now also provides DH and ECDH via PKCS#11 and can use tokens as random number generators (RNG). By default only private key operations are enabled, more advanced features have to be enabled by their option in strongswan.conf. This also applies to public OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=39
2012-02-15 14:32:28 +01:00
BuildArch: noarch
Summary: Documentation for strongSwan
Group: Documentation/Man
%description doc
StrongSwan is an IPsec-based VPN solution for Linux.
This package provides the StrongSwan documentation.
%package libs0
Summary: strongSwan core libraries and basic plugins
- Updated to strongSwan 4.6.3 release: - The tnc-pdp plugin implements a RADIUS server interface allowing a strongSwan TNC server to act as a Policy Decision Point. - The eap-radius authentication backend enforces Session-Timeout attributes using RFC4478 repeated authentication and acts upon RADIUS Dynamic Authorization extensions, RFC 5176. Currently supported are disconnect requests and CoA messages containing a Session-Timeout. - The eap-radius plugin can forward arbitrary RADIUS attributes from and to clients using custom IKEv2 notify payloads. The new radattr plugin reads attributes to include from files and prints received attributes to the console. - Added support for untruncated MD5 and SHA1 HMACs in ESP as used in RFC 4595. - The cmac plugin implements the AES-CMAC-96 and AES-CMAC-PRF-128 algorithms as defined in RFC 4494 and RFC 4615, respectively. - The resolve plugin automatically installs nameservers via resolvconf(8), if it is installed, instead of modifying /etc/resolv.conf directly. - The IKEv2 charon daemon supports now raw RSA public keys in RFC 3110 DNSKEY and PKCS#1 file format. - The farp plugin sends ARP responses for any tunneled address, not only virtual IPs. - Charon resolves hosts again during additional keying tries. - Fixed switching back to original address pair during MOBIKE. - When resending IKE_SA_INIT with a COOKIE charon reuses the previous DH value, as specified in RFC 5996. This has an effect on the lifecycle of diffie_hellman_t, see source:src/libcharon/sa/keymat.h#39 for details. - COOKIEs are now kept enabled a bit longer to avoid certain race OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=44
2012-05-10 12:02:51 +02:00
Group: Productivity/Networking/Security
Conflicts: strongswan < %{version}
%description libs0
StrongSwan is an IPsec-based VPN solution for Linux.
This package provides the strongswan library and plugins.
%package hmac
Summary: HMAC files for FIPS-140-2 integrity in strongSwan
Group: Productivity/Networking/Security
Requires: fipscheck
Requires: strongswan-ipsec = %{version}
Requires: strongswan-libs0 = %{version}
%description hmac
The package provides HMAC hash files for FIPS-140-2 integrity checks,
a config file disabling alternative algorithm implementations and a
_fipscheck helper script preforming the integrity checks before e.g.
"ipsec start" action is executed, when FIPS-140-2 compliant operation
mode is enabled.
%package ipsec
Summary: IPsec-based VPN solution
- Updated to strongSwan 4.6.3 release: - The tnc-pdp plugin implements a RADIUS server interface allowing a strongSwan TNC server to act as a Policy Decision Point. - The eap-radius authentication backend enforces Session-Timeout attributes using RFC4478 repeated authentication and acts upon RADIUS Dynamic Authorization extensions, RFC 5176. Currently supported are disconnect requests and CoA messages containing a Session-Timeout. - The eap-radius plugin can forward arbitrary RADIUS attributes from and to clients using custom IKEv2 notify payloads. The new radattr plugin reads attributes to include from files and prints received attributes to the console. - Added support for untruncated MD5 and SHA1 HMACs in ESP as used in RFC 4595. - The cmac plugin implements the AES-CMAC-96 and AES-CMAC-PRF-128 algorithms as defined in RFC 4494 and RFC 4615, respectively. - The resolve plugin automatically installs nameservers via resolvconf(8), if it is installed, instead of modifying /etc/resolv.conf directly. - The IKEv2 charon daemon supports now raw RSA public keys in RFC 3110 DNSKEY and PKCS#1 file format. - The farp plugin sends ARP responses for any tunneled address, not only virtual IPs. - Charon resolves hosts again during additional keying tries. - Fixed switching back to original address pair during MOBIKE. - When resending IKE_SA_INIT with a COOKIE charon reuses the previous DH value, as specified in RFC 5996. This has an effect on the lifecycle of diffie_hellman_t, see source:src/libcharon/sa/keymat.h#39 for details. - COOKIEs are now kept enabled a bit longer to avoid certain race OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=44
2012-05-10 12:02:51 +02:00
Group: Productivity/Networking/Security
Requires: strongswan-libs0 = %{version}
Provides: VPN
Provides: ipsec
Provides: strongswan = %{version}
Obsoletes: strongswan < %{version}
Conflicts: freeswan openswan
%description ipsec
StrongSwan is an IPsec-based VPN solution for Linux.
This package provides the /etc/init.d/ipsec service script and allows
to maintain both IKEv1 and IKEv2 using the /etc/ipsec.conf and the
/etc/ipsec.sectes files.
%package mysql
Summary: MySQL plugin for strongSwan
- Updated to strongSwan 4.6.3 release: - The tnc-pdp plugin implements a RADIUS server interface allowing a strongSwan TNC server to act as a Policy Decision Point. - The eap-radius authentication backend enforces Session-Timeout attributes using RFC4478 repeated authentication and acts upon RADIUS Dynamic Authorization extensions, RFC 5176. Currently supported are disconnect requests and CoA messages containing a Session-Timeout. - The eap-radius plugin can forward arbitrary RADIUS attributes from and to clients using custom IKEv2 notify payloads. The new radattr plugin reads attributes to include from files and prints received attributes to the console. - Added support for untruncated MD5 and SHA1 HMACs in ESP as used in RFC 4595. - The cmac plugin implements the AES-CMAC-96 and AES-CMAC-PRF-128 algorithms as defined in RFC 4494 and RFC 4615, respectively. - The resolve plugin automatically installs nameservers via resolvconf(8), if it is installed, instead of modifying /etc/resolv.conf directly. - The IKEv2 charon daemon supports now raw RSA public keys in RFC 3110 DNSKEY and PKCS#1 file format. - The farp plugin sends ARP responses for any tunneled address, not only virtual IPs. - Charon resolves hosts again during additional keying tries. - Fixed switching back to original address pair during MOBIKE. - When resending IKE_SA_INIT with a COOKIE charon reuses the previous DH value, as specified in RFC 5996. This has an effect on the lifecycle of diffie_hellman_t, see source:src/libcharon/sa/keymat.h#39 for details. - COOKIEs are now kept enabled a bit longer to avoid certain race OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=44
2012-05-10 12:02:51 +02:00
Group: Productivity/Networking/Security
Requires: strongswan-libs0 = %{version}
%description mysql
StrongSwan is an IPsec-based VPN solution for Linux.
This package provides the strongswan mysql plugin.
%package sqlite
Summary: SQLite plugin for strongSwan
- Updated to strongSwan 4.6.3 release: - The tnc-pdp plugin implements a RADIUS server interface allowing a strongSwan TNC server to act as a Policy Decision Point. - The eap-radius authentication backend enforces Session-Timeout attributes using RFC4478 repeated authentication and acts upon RADIUS Dynamic Authorization extensions, RFC 5176. Currently supported are disconnect requests and CoA messages containing a Session-Timeout. - The eap-radius plugin can forward arbitrary RADIUS attributes from and to clients using custom IKEv2 notify payloads. The new radattr plugin reads attributes to include from files and prints received attributes to the console. - Added support for untruncated MD5 and SHA1 HMACs in ESP as used in RFC 4595. - The cmac plugin implements the AES-CMAC-96 and AES-CMAC-PRF-128 algorithms as defined in RFC 4494 and RFC 4615, respectively. - The resolve plugin automatically installs nameservers via resolvconf(8), if it is installed, instead of modifying /etc/resolv.conf directly. - The IKEv2 charon daemon supports now raw RSA public keys in RFC 3110 DNSKEY and PKCS#1 file format. - The farp plugin sends ARP responses for any tunneled address, not only virtual IPs. - Charon resolves hosts again during additional keying tries. - Fixed switching back to original address pair during MOBIKE. - When resending IKE_SA_INIT with a COOKIE charon reuses the previous DH value, as specified in RFC 5996. This has an effect on the lifecycle of diffie_hellman_t, see source:src/libcharon/sa/keymat.h#39 for details. - COOKIEs are now kept enabled a bit longer to avoid certain race OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=44
2012-05-10 12:02:51 +02:00
Group: Productivity/Networking/Security
Requires: strongswan-libs0 = %{version}
%description sqlite
StrongSwan is an OpenSource IPsec-based VPN solution for Linux.
This package provides the strongswan sqlite plugin.
%package nm
Summary: NetworkManager plugin for strongSwan
- Updated to strongSwan 4.6.3 release: - The tnc-pdp plugin implements a RADIUS server interface allowing a strongSwan TNC server to act as a Policy Decision Point. - The eap-radius authentication backend enforces Session-Timeout attributes using RFC4478 repeated authentication and acts upon RADIUS Dynamic Authorization extensions, RFC 5176. Currently supported are disconnect requests and CoA messages containing a Session-Timeout. - The eap-radius plugin can forward arbitrary RADIUS attributes from and to clients using custom IKEv2 notify payloads. The new radattr plugin reads attributes to include from files and prints received attributes to the console. - Added support for untruncated MD5 and SHA1 HMACs in ESP as used in RFC 4595. - The cmac plugin implements the AES-CMAC-96 and AES-CMAC-PRF-128 algorithms as defined in RFC 4494 and RFC 4615, respectively. - The resolve plugin automatically installs nameservers via resolvconf(8), if it is installed, instead of modifying /etc/resolv.conf directly. - The IKEv2 charon daemon supports now raw RSA public keys in RFC 3110 DNSKEY and PKCS#1 file format. - The farp plugin sends ARP responses for any tunneled address, not only virtual IPs. - Charon resolves hosts again during additional keying tries. - Fixed switching back to original address pair during MOBIKE. - When resending IKE_SA_INIT with a COOKIE charon reuses the previous DH value, as specified in RFC 5996. This has an effect on the lifecycle of diffie_hellman_t, see source:src/libcharon/sa/keymat.h#39 for details. - COOKIEs are now kept enabled a bit longer to avoid certain race OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=44
2012-05-10 12:02:51 +02:00
Group: Productivity/Networking/Security
Requires: strongswan-libs0 = %{version}
%description nm
StrongSwan is an OpenSource IPsec-based VPN solution for Linux.
This package provides the NetworkManager plugin to control the
charon IKEv2 daemon through D-Bus, designed to work using the
NetworkManager-strongswan graphical user interface.
%package tests
Summary: Testing plugins for strongSwan
- Updated to strongSwan 4.6.3 release: - The tnc-pdp plugin implements a RADIUS server interface allowing a strongSwan TNC server to act as a Policy Decision Point. - The eap-radius authentication backend enforces Session-Timeout attributes using RFC4478 repeated authentication and acts upon RADIUS Dynamic Authorization extensions, RFC 5176. Currently supported are disconnect requests and CoA messages containing a Session-Timeout. - The eap-radius plugin can forward arbitrary RADIUS attributes from and to clients using custom IKEv2 notify payloads. The new radattr plugin reads attributes to include from files and prints received attributes to the console. - Added support for untruncated MD5 and SHA1 HMACs in ESP as used in RFC 4595. - The cmac plugin implements the AES-CMAC-96 and AES-CMAC-PRF-128 algorithms as defined in RFC 4494 and RFC 4615, respectively. - The resolve plugin automatically installs nameservers via resolvconf(8), if it is installed, instead of modifying /etc/resolv.conf directly. - The IKEv2 charon daemon supports now raw RSA public keys in RFC 3110 DNSKEY and PKCS#1 file format. - The farp plugin sends ARP responses for any tunneled address, not only virtual IPs. - Charon resolves hosts again during additional keying tries. - Fixed switching back to original address pair during MOBIKE. - When resending IKE_SA_INIT with a COOKIE charon reuses the previous DH value, as specified in RFC 5996. This has an effect on the lifecycle of diffie_hellman_t, see source:src/libcharon/sa/keymat.h#39 for details. - COOKIEs are now kept enabled a bit longer to avoid certain race OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=44
2012-05-10 12:02:51 +02:00
Group: Productivity/Networking/Security
Requires: strongswan-libs0 = %{version}
%description tests
StrongSwan is an OpenSource IPsec-based VPN solution for Linux.
This package provides the strongswan crypto test vectors plugin
and the load testing plugin for IKEv2 daemon.
%prep
%setup -q -n %{name}-%{upstream_version}
%patch1 -p0
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%patch2 -p0
%if %{with fipscheck}
Accepting request 513652 from home:ndas:branches:network:vpn - Updated to strongSwan 5.3.5 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures. More specifically, mpz_powm_sec() has two requirements regarding the passed exponent and modulus that the plugin did not enforce, if these are not met the calculation will result in a floating point exception that crashes the whole process. This vulnerability has been registered as CVE-2017-9022. Please refer to our blog for details. *Fixed a DoS vulnerability in the x509 plugin that was caused because the ASN.1 parser didn't handle ASN.1 CHOICE types properly, which could result in an infinite loop when parsing X.509 extensions that use such types. This vulnerability has been registered as CVE-2017-9023. Please refer to our blog for details. *The behavior during IKEv2 CHILD_SA rekeying has been changed in order to avoid traffic loss. When responding to a CREATE_CHILD_SA request to rekey a CHILD_SA the responder already has everything available to install and use the new CHILD_SA. However, this could lead to lost traffic as the initiator won't be able to process inbound packets until it processed the CREATE_CHILD_SA response and updated the inbound SA. To avoid this the responder now only installs the new inbound SA and delays installing the outbound SA until it receives the DELETE for the replaced CHILD_SA. *The messages transporting these DELETEs could reach the peer before packets sent with the deleted outbound SAs reach it. To reduce the chance of traffic loss due to this the inbound SA of the replaced CHILD_SA is not removed for a configurable amount of seconds (charon.delete_rekeyed_delay) after the DELETE has been processed. *The code base has been ported to Apple's ARM64 iOS platform, which required several changes regarding the use of variadic functions. This was necessary because the calling conventions for variadic and regular functions are different there. This means that assigning a non-variadic function to a variadic function pointer, as we did with our enumerator_t::enumerate() implementations and several callbacks, will result in crashes as the called function accesses the arguments differently than the OBS-URL: https://build.opensuse.org/request/show/513652 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=99
2017-08-01 09:21:05 +02:00
%patch3 -p1
%patch4 -p1
%endif
Accepting request 513652 from home:ndas:branches:network:vpn - Updated to strongSwan 5.3.5 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures. More specifically, mpz_powm_sec() has two requirements regarding the passed exponent and modulus that the plugin did not enforce, if these are not met the calculation will result in a floating point exception that crashes the whole process. This vulnerability has been registered as CVE-2017-9022. Please refer to our blog for details. *Fixed a DoS vulnerability in the x509 plugin that was caused because the ASN.1 parser didn't handle ASN.1 CHOICE types properly, which could result in an infinite loop when parsing X.509 extensions that use such types. This vulnerability has been registered as CVE-2017-9023. Please refer to our blog for details. *The behavior during IKEv2 CHILD_SA rekeying has been changed in order to avoid traffic loss. When responding to a CREATE_CHILD_SA request to rekey a CHILD_SA the responder already has everything available to install and use the new CHILD_SA. However, this could lead to lost traffic as the initiator won't be able to process inbound packets until it processed the CREATE_CHILD_SA response and updated the inbound SA. To avoid this the responder now only installs the new inbound SA and delays installing the outbound SA until it receives the DELETE for the replaced CHILD_SA. *The messages transporting these DELETEs could reach the peer before packets sent with the deleted outbound SAs reach it. To reduce the chance of traffic loss due to this the inbound SA of the replaced CHILD_SA is not removed for a configurable amount of seconds (charon.delete_rekeyed_delay) after the DELETE has been processed. *The code base has been ported to Apple's ARM64 iOS platform, which required several changes regarding the use of variadic functions. This was necessary because the calling conventions for variadic and regular functions are different there. This means that assigning a non-variadic function to a variadic function pointer, as we did with our enumerator_t::enumerate() implementations and several callbacks, will result in crashes as the called function accesses the arguments differently than the OBS-URL: https://build.opensuse.org/request/show/513652 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=99
2017-08-01 09:21:05 +02:00
%patch5 -p1
%patch6 -p1
sed -e 's|@libexecdir@|%_libexecdir|g' \
< %{_sourcedir}/strongswan.init.in \
> strongswan.init
%if %{with fipscheck}
sed -e 's|@IPSEC_DIR@|%{_libexecdir}/ipsec|g' \
-e 's|@IPSEC_LIBDIR@|%{_libdir}/ipsec|g' \
-e 's|@IPSEC_SBINDIR@|%{_sbindir}|g' \
-e 's|@IPSEC_BINDIR@|%{_bindir}|g' \
< %{_sourcedir}/fipscheck.sh.in \
> _fipscheck
%endif
%build
CFLAGS="%{optflags} -W -Wall -Wno-pointer-sign -Wno-strict-aliasing -Wno-unused-parameter"
export CFLAGS
autoreconf --force --install
%configure \
%if %{with integrity}
--enable-integrity-test \
%endif
--with-capabilities=libcap \
--with-plugindir=%{strongswan_plugins} \
--with-resolv-conf=%{_rundir}/%{name}/resolv.conf \
--with-piddir=%{_rundir}/%{name} \
%if %{with systemd}
--with-systemdsystemunitdir=%{_unitdir} \
%endif
--enable-pkcs11 \
--enable-openssl \
--enable-agent \
%if %{with gcrypt}
--enable-gcrypt \
%else
--disable-gcrypt \
%endif
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
--enable-blowfish \
--enable-ctr \
--enable-ccm \
--enable-gcm \
--enable-unity \
--enable-md4 \
%if %{with afalg}
--enable-af-alg \
%endif
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
--enable-eap-sim \
--enable-eap-sim-file \
--enable-eap-sim-pcsc \
--enable-eap-aka \
--enable-eap-aka-3gpp2 \
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
--enable-eap-simaka-sql \
--enable-eap-simaka-pseudonym \
--enable-eap-simaka-reauth \
--enable-eap-identity \
--enable-eap-md5 \
--enable-eap-gtc \
--enable-eap-mschapv2 \
--enable-eap-tls \
--enable-eap-ttls \
--enable-eap-peap \
--enable-eap-tnc \
--enable-eap-dynamic \
--enable-eap-radius \
--enable-xauth-eap \
--enable-xauth-pam \
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
--enable-tnc-pdp \
--enable-tnc-imc \
--enable-tnc-imv \
--enable-tnccs-11 \
--enable-tnccs-20 \
--enable-tnccs-dynamic \
--enable-imc-test \
--enable-imv-test \
--enable-imc-scanner \
--enable-imv-scanner \
--enable-ha \
--enable-dhcp \
%if %{with farp}
--enable-farp \
%endif
--enable-smp \
--enable-sql \
--enable-attr-sql \
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
--enable-addrblock \
--enable-radattr \
--enable-mediation \
--enable-led \
--enable-certexpire \
--enable-duplicheck \
--enable-coupling \
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with mysql}
--enable-mysql \
%endif
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with sqlite}
--enable-sqlite \
%endif
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with nm}
--enable-nm \
%else
--disable-nm \
%endif
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with tests}
--enable-conftest \
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
--enable-load-tester \
--enable-test-vectors \
%endif
--enable-ldap \
--enable-soup \
--enable-curl \
--disable-static
make %{?_smp_mflags}
%install
install -d -m755 %{buildroot}/%{_sbindir}/
install -d -m755 %{buildroot}/%{_sysconfdir}/ipsec.d/
%if %{with systemd}
ln -sf %{_sbindir}/service %{buildroot}/%{_sbindir}/rcstrongswan
%else
install -d -m755 %{buildroot}/%{_sysconfdir}/init.d/
install -m755 strongswan.init %{buildroot}/%{_sysconfdir}/init.d/ipsec
ln -s %{_sysconfdir}/init.d/ipsec %{buildroot}/%{_sbindir}/rcipsec
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%endif
#
# Ensure, plugin -> library dependencies can be resolved
# (e.g. libtls) to avoid plugin segment checksum errors.
#
LD_LIBRARY_PATH="%{buildroot}-$$/%{strongswan_libdir}" \
%make_install
#
# checksums are calculated during make install using the
# installed binaries/libraries... but find-debuginfo.sh
# extracts debuginfo/debugsource breaking file checksums.
# let find-debuginfo.sh run on a build root copy and then
# calculate the checksums.
#
%if %{with integrity}
%{?__debug_package:
if test -x %{_rpmconfigdir}/find-debuginfo.sh ; then
cp -a "%{buildroot}" "%{buildroot}-$$"
RPM_BUILD_ROOT="%{buildroot}-$$" \
%{_rpmconfigdir}/find-debuginfo.sh \
%{?_find_debuginfo_opts} "%{buildroot}-$$"
make -C src/checksum clean
rm -f src/checksum/checksum_builder
LD_LIBRARY_PATH="%{buildroot}-$$/%{strongswan_libdir}" \
make -C src/checksum install DESTDIR="%{buildroot}-$$"
mv "%{buildroot}-$$/%{strongswan_libdir}/libchecksum.so" \
"%{buildroot}/%{strongswan_libdir}/libchecksum.so"
rm -rf "%{buildroot}-$$"
fi
}
%endif
#
rm -f %{buildroot}/%{_sysconfdir}/ipsec.secrets
cat << EOT > %{buildroot}/%{_sysconfdir}/ipsec.secrets
#
# ipsec.secrets
#
# This file holds the RSA private keys or the PSK preshared secrets for
# the IKE/IPsec authentication. See the ipsec.secrets(5) manual page.
#
EOT
#
%if ! %{with mysql}
rm -f %{buildroot}/%{strongswan_templates}/database/sql/mysql.sql
%endif
%if ! %{with sqlite}
rm -f %{buildroot}/%{strongswan_templates}/database/sql/sqlite.sql
%endif
rm -f %{buildroot}/%{strongswan_libdir}/lib{charon,hydra,strongswan,pttls}.so
rm -f %{buildroot}/%{strongswan_libdir}/lib{radius,simaka,tls,tnccs,imcv}.so
find %{buildroot}/%{strongswan_libdir} -type f -name "*.la" -delete
#
install -d -m755 %{buildroot}/%{strongswan_docdir}/
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
install -c -m644 TODO NEWS README COPYING LICENSE \
AUTHORS ChangeLog \
%{buildroot}/%{strongswan_docdir}/
install -c -m644 %{_sourcedir}/README.SUSE \
%{buildroot}/%{strongswan_docdir}/
%if %{with systemd}
%{__install} -d -m 0755 %{buildroot}%{_tmpfilesdir}
echo 'd %{_rundir}/%{name} 0770 root root' > %{buildroot}%{_tmpfilesdir}/%{name}.conf
%endif
%if %{with fipscheck}
#
# note: keep the following, _fipscheck's and file lists in sync
#
install -c -m750 _fipscheck %{buildroot}/%{_libexecdir}/ipsec/
install -c -m644 %{_sourcedir}/fips-enforce.conf \
%{buildroot}/%{strongswan_configs}/charon/zzz_fips-enforce.conf
# create fips hmac hashes _after_ install post run
%{expand:%%global __os_install_post {%__os_install_post
for f in %{buildroot}/%{strongswan_libdir}/lib*.so.*.*.* \
%{buildroot}/%{strongswan_libdir}/imcvs/*.so \
%{buildroot}/%{strongswan_plugins}/*.so \
%{buildroot}/%{_libexecdir}/ipsec/charon \
%{buildroot}/%{_libexecdir}/ipsec/charon-nm \
%{buildroot}/%{_libexecdir}/ipsec/stroke \
%{buildroot}/%{_libexecdir}/ipsec/starter \
%{buildroot}/%{_libexecdir}/ipsec/pool \
%{buildroot}/%{_libexecdir}/ipsec/scepclient \
%{buildroot}/%{_libexecdir}/ipsec/imv_policy_manager \
%{buildroot}/%{_libexecdir}/ipsec/_fipscheck \
%{buildroot}/%{_bindir}/pt-tls-client \
%{buildroot}/%{_sbindir}/ipsec \
;
do
/usr/bin/fipshmac "$f"
done
}}
%endif
%post libs0
/sbin/ldconfig
%{?tmpfiles_create:%tmpfiles_create %{_tmpfilesdir}/%{name}.conf}
%{!?tmpfiles_create:test -d %{_rundir}/%{name} || %{__mkdir_p} %{_rundir}/%{name}}
%postun libs0 -p /sbin/ldconfig
%pre ipsec
%if %{with systemd}
%service_add_pre %{name}.service
%endif
%post ipsec
%if %{with systemd}
%service_add_post %{name}.service
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%endif
%preun ipsec
%if %{with systemd}
%service_del_preun %{name}.service
%else
%{stop_on_removal ipsec}
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%endif
if test -s %{_sysconfdir}/ipsec.secrets.rpmsave ; then
cp -p --backup=numbered %{_sysconfdir}/ipsec.secrets.rpmsave \
%{_sysconfdir}/ipsec.secrets.rpmsave.old
fi
if test -s %{_sysconfdir}/ipsec.conf.rpmsave ; then
cp -p --backup=numbered %{_sysconfdir}/ipsec.conf.rpmsave \
%{_sysconfdir}/ipsec.conf.rpmsave.old
fi
%postun ipsec
%if %{with systemd}
%service_del_postun %{name}.service
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%endif
%files
%defattr(-,root,root)
%dir %{strongswan_docdir}
%{strongswan_docdir}/README.SUSE
%if %{with fipscheck}
%files hmac
%defattr(-,root,root)
%dir %{strongswan_configs}
%dir %{strongswan_configs}/charon
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/zzz_fips-enforce.conf
%dir %{strongswan_libdir}
%{strongswan_libdir}/.*.hmac
%{strongswan_libdir}/imcvs/.*.hmac
%dir %{strongswan_plugins}
%{strongswan_plugins}/.*.hmac
%dir %{_libexecdir}/ipsec
%{_libexecdir}/ipsec/_fipscheck
%{_libexecdir}/ipsec/.*.hmac
%{_sbindir}/.ipsec.hmac
Accepting request 521273 from home:ndas:branches:network:vpn - Updated to strongSwan 5.6.0 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures, which requires decryption with the operation m^e mod n, where m is the signature, and e and n are the exponent and modulus of the public key. The value m is an integer between 0 and n-1, however, the gmp plugin did not verify this. So if m equals n the calculation results in 0, in which case mpz_export() returns NULL. This result wasn't handled properly causing a null-pointer dereference. This vulnerability has been registered as CVE-2017-11185. (bsc#1051222) *New SWIMA IMC/IMV pair implements the draft-ietf-sacm-nea-swima-patnc Internet Draft and has been demonstrated at the IETF 99 Prague Hackathon. *The IMV database template has been adapted to achieve full compliance with the ISO 19770-2:2015 SWID tag standard. *The pt-tls-client can attach and use TPM 2.0 protected private keys via the --keyid parameter. *By default the /etc/swanctl/conf.d directory is created and *.conf files in it are included in the default swanctl.conf file. *The curl plugin now follows HTTP redirects (configurable via strongswan.conf). *The CHILD_SA rekeying was fixed in charon-tkm and the behavior is refined a bit more since 5.5.3 *libtpmtss supports Intel's TSS2 Architecture Broker and Resource Manager interface (tcti-tabrmd). * more on https://wiki.strongswan.org/versions/66 OBS-URL: https://build.opensuse.org/request/show/521273 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=104
2017-09-05 17:38:01 +02:00
%{_bindir}/.pt-tls-client.hmac
%endif
%files ipsec
%defattr(-,root,root)
%config(noreplace) %attr(600,root,root) %{_sysconfdir}/ipsec.conf
%config(noreplace) %attr(600,root,root) %{_sysconfdir}/ipsec.secrets
Accepting request 513652 from home:ndas:branches:network:vpn - Updated to strongSwan 5.3.5 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures. More specifically, mpz_powm_sec() has two requirements regarding the passed exponent and modulus that the plugin did not enforce, if these are not met the calculation will result in a floating point exception that crashes the whole process. This vulnerability has been registered as CVE-2017-9022. Please refer to our blog for details. *Fixed a DoS vulnerability in the x509 plugin that was caused because the ASN.1 parser didn't handle ASN.1 CHOICE types properly, which could result in an infinite loop when parsing X.509 extensions that use such types. This vulnerability has been registered as CVE-2017-9023. Please refer to our blog for details. *The behavior during IKEv2 CHILD_SA rekeying has been changed in order to avoid traffic loss. When responding to a CREATE_CHILD_SA request to rekey a CHILD_SA the responder already has everything available to install and use the new CHILD_SA. However, this could lead to lost traffic as the initiator won't be able to process inbound packets until it processed the CREATE_CHILD_SA response and updated the inbound SA. To avoid this the responder now only installs the new inbound SA and delays installing the outbound SA until it receives the DELETE for the replaced CHILD_SA. *The messages transporting these DELETEs could reach the peer before packets sent with the deleted outbound SAs reach it. To reduce the chance of traffic loss due to this the inbound SA of the replaced CHILD_SA is not removed for a configurable amount of seconds (charon.delete_rekeyed_delay) after the DELETE has been processed. *The code base has been ported to Apple's ARM64 iOS platform, which required several changes regarding the use of variadic functions. This was necessary because the calling conventions for variadic and regular functions are different there. This means that assigning a non-variadic function to a variadic function pointer, as we did with our enumerator_t::enumerate() implementations and several callbacks, will result in crashes as the called function accesses the arguments differently than the OBS-URL: https://build.opensuse.org/request/show/513652 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=99
2017-08-01 09:21:05 +02:00
%config(noreplace) %attr(600,root,root) %{_sysconfdir}/swanctl/swanctl.conf
%dir %{_sysconfdir}/swanctl
%dir %{_sysconfdir}/ipsec.d
%dir %{_sysconfdir}/ipsec.d/crls
%dir %{_sysconfdir}/ipsec.d/reqs
%dir %{_sysconfdir}/ipsec.d/certs
%dir %{_sysconfdir}/ipsec.d/acerts
%dir %{_sysconfdir}/ipsec.d/aacerts
%dir %{_sysconfdir}/ipsec.d/cacerts
%dir %{_sysconfdir}/ipsec.d/ocspcerts
%dir %attr(700,root,root) %{_sysconfdir}/ipsec.d/private
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with systemd}
%{_unitdir}/strongswan.service
Accepting request 513652 from home:ndas:branches:network:vpn - Updated to strongSwan 5.3.5 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures. More specifically, mpz_powm_sec() has two requirements regarding the passed exponent and modulus that the plugin did not enforce, if these are not met the calculation will result in a floating point exception that crashes the whole process. This vulnerability has been registered as CVE-2017-9022. Please refer to our blog for details. *Fixed a DoS vulnerability in the x509 plugin that was caused because the ASN.1 parser didn't handle ASN.1 CHOICE types properly, which could result in an infinite loop when parsing X.509 extensions that use such types. This vulnerability has been registered as CVE-2017-9023. Please refer to our blog for details. *The behavior during IKEv2 CHILD_SA rekeying has been changed in order to avoid traffic loss. When responding to a CREATE_CHILD_SA request to rekey a CHILD_SA the responder already has everything available to install and use the new CHILD_SA. However, this could lead to lost traffic as the initiator won't be able to process inbound packets until it processed the CREATE_CHILD_SA response and updated the inbound SA. To avoid this the responder now only installs the new inbound SA and delays installing the outbound SA until it receives the DELETE for the replaced CHILD_SA. *The messages transporting these DELETEs could reach the peer before packets sent with the deleted outbound SAs reach it. To reduce the chance of traffic loss due to this the inbound SA of the replaced CHILD_SA is not removed for a configurable amount of seconds (charon.delete_rekeyed_delay) after the DELETE has been processed. *The code base has been ported to Apple's ARM64 iOS platform, which required several changes regarding the use of variadic functions. This was necessary because the calling conventions for variadic and regular functions are different there. This means that assigning a non-variadic function to a variadic function pointer, as we did with our enumerator_t::enumerate() implementations and several callbacks, will result in crashes as the called function accesses the arguments differently than the OBS-URL: https://build.opensuse.org/request/show/513652 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=99
2017-08-01 09:21:05 +02:00
%{_sysconfdir}/dbus-1/system.d/nm-strongswan-service.conf
%{_sbindir}/rcstrongswan
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%else
%config %{_sysconfdir}/init.d/ipsec
%{_sbindir}/rcipsec
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%endif
- Updated to strongSwan 5.1.1 minor release addressing two security fixes (bnc#847506,CVE-2013-6075, bnc#847509,CVE-2013-6076): - Fixed a denial-of-service vulnerability and potential authorization bypass triggered by a crafted ID_DER_ASN1_DN ID payload. The cause is an insufficient length check when comparing such identities. The vulnerability has been registered as CVE-2013-6075. - Fixed a denial-of-service vulnerability triggered by a crafted IKEv1 fragmentation payload. The cause is a NULL pointer dereference. The vulnerability has been registered as CVE-2013-6076. - The lean stand-alone pt-tls-client can set up a RFC 6876 PT-TLS session with a strongSwan policy enforcement point which uses the tnc-pdp charon plugin. - The new TCG TNC SWID IMC/IMV pair supports targeted SWID requests for either full SWID Tag or concise SWID Tag ID inventories. - The XAuth backend in eap-radius now supports multiple XAuth exchanges for different credential types and display messages. All user input gets concatenated and verified with a single User-Password RADIUS attribute on the AAA. With an AAA supporting it, one for example can implement Password+Token authentication with proper dialogs on iOS and OS X clients. - charon supports IKEv1 Mode Config exchange in push mode. The ipsec.conf modeconfig=push option enables it for both client and server, the same way as pluto used it. - Using the "ah" ipsec.conf keyword on both IKEv1 and IKEv2 connections, charon can negotiate and install Security Associations integrity-protected by the Authentication Header protocol. Supported are plain AH(+IPComp) SAs only, but not the deprecated RFC2401 style ESP+AH bundles. [...] OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=62
2013-11-01 13:47:59 +01:00
%{_bindir}/pki
Accepting request 521273 from home:ndas:branches:network:vpn - Updated to strongSwan 5.6.0 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures, which requires decryption with the operation m^e mod n, where m is the signature, and e and n are the exponent and modulus of the public key. The value m is an integer between 0 and n-1, however, the gmp plugin did not verify this. So if m equals n the calculation results in 0, in which case mpz_export() returns NULL. This result wasn't handled properly causing a null-pointer dereference. This vulnerability has been registered as CVE-2017-11185. (bsc#1051222) *New SWIMA IMC/IMV pair implements the draft-ietf-sacm-nea-swima-patnc Internet Draft and has been demonstrated at the IETF 99 Prague Hackathon. *The IMV database template has been adapted to achieve full compliance with the ISO 19770-2:2015 SWID tag standard. *The pt-tls-client can attach and use TPM 2.0 protected private keys via the --keyid parameter. *By default the /etc/swanctl/conf.d directory is created and *.conf files in it are included in the default swanctl.conf file. *The curl plugin now follows HTTP redirects (configurable via strongswan.conf). *The CHILD_SA rekeying was fixed in charon-tkm and the behavior is refined a bit more since 5.5.3 *libtpmtss supports Intel's TSS2 Architecture Broker and Resource Manager interface (tcti-tabrmd). * more on https://wiki.strongswan.org/versions/66 OBS-URL: https://build.opensuse.org/request/show/521273 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=104
2017-09-05 17:38:01 +02:00
%{_bindir}/pt-tls-client
%{_sbindir}/ipsec
Accepting request 513652 from home:ndas:branches:network:vpn - Updated to strongSwan 5.3.5 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures. More specifically, mpz_powm_sec() has two requirements regarding the passed exponent and modulus that the plugin did not enforce, if these are not met the calculation will result in a floating point exception that crashes the whole process. This vulnerability has been registered as CVE-2017-9022. Please refer to our blog for details. *Fixed a DoS vulnerability in the x509 plugin that was caused because the ASN.1 parser didn't handle ASN.1 CHOICE types properly, which could result in an infinite loop when parsing X.509 extensions that use such types. This vulnerability has been registered as CVE-2017-9023. Please refer to our blog for details. *The behavior during IKEv2 CHILD_SA rekeying has been changed in order to avoid traffic loss. When responding to a CREATE_CHILD_SA request to rekey a CHILD_SA the responder already has everything available to install and use the new CHILD_SA. However, this could lead to lost traffic as the initiator won't be able to process inbound packets until it processed the CREATE_CHILD_SA response and updated the inbound SA. To avoid this the responder now only installs the new inbound SA and delays installing the outbound SA until it receives the DELETE for the replaced CHILD_SA. *The messages transporting these DELETEs could reach the peer before packets sent with the deleted outbound SAs reach it. To reduce the chance of traffic loss due to this the inbound SA of the replaced CHILD_SA is not removed for a configurable amount of seconds (charon.delete_rekeyed_delay) after the DELETE has been processed. *The code base has been ported to Apple's ARM64 iOS platform, which required several changes regarding the use of variadic functions. This was necessary because the calling conventions for variadic and regular functions are different there. This means that assigning a non-variadic function to a variadic function pointer, as we did with our enumerator_t::enumerate() implementations and several callbacks, will result in crashes as the called function accesses the arguments differently than the OBS-URL: https://build.opensuse.org/request/show/513652 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=99
2017-08-01 09:21:05 +02:00
%{_sbindir}/swanctl
- Updated to strongSwan 5.1.1 minor release addressing two security fixes (bnc#847506,CVE-2013-6075, bnc#847509,CVE-2013-6076): - Fixed a denial-of-service vulnerability and potential authorization bypass triggered by a crafted ID_DER_ASN1_DN ID payload. The cause is an insufficient length check when comparing such identities. The vulnerability has been registered as CVE-2013-6075. - Fixed a denial-of-service vulnerability triggered by a crafted IKEv1 fragmentation payload. The cause is a NULL pointer dereference. The vulnerability has been registered as CVE-2013-6076. - The lean stand-alone pt-tls-client can set up a RFC 6876 PT-TLS session with a strongSwan policy enforcement point which uses the tnc-pdp charon plugin. - The new TCG TNC SWID IMC/IMV pair supports targeted SWID requests for either full SWID Tag or concise SWID Tag ID inventories. - The XAuth backend in eap-radius now supports multiple XAuth exchanges for different credential types and display messages. All user input gets concatenated and verified with a single User-Password RADIUS attribute on the AAA. With an AAA supporting it, one for example can implement Password+Token authentication with proper dialogs on iOS and OS X clients. - charon supports IKEv1 Mode Config exchange in push mode. The ipsec.conf modeconfig=push option enables it for both client and server, the same way as pluto used it. - Using the "ah" ipsec.conf keyword on both IKEv1 and IKEv2 connections, charon can negotiate and install Security Associations integrity-protected by the Authentication Header protocol. Supported are plain AH(+IPComp) SAs only, but not the deprecated RFC2401 style ESP+AH bundles. [...] OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=62
2013-11-01 13:47:59 +01:00
%{_mandir}/man1/pki*.1*
Accepting request 521273 from home:ndas:branches:network:vpn - Updated to strongSwan 5.6.0 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures, which requires decryption with the operation m^e mod n, where m is the signature, and e and n are the exponent and modulus of the public key. The value m is an integer between 0 and n-1, however, the gmp plugin did not verify this. So if m equals n the calculation results in 0, in which case mpz_export() returns NULL. This result wasn't handled properly causing a null-pointer dereference. This vulnerability has been registered as CVE-2017-11185. (bsc#1051222) *New SWIMA IMC/IMV pair implements the draft-ietf-sacm-nea-swima-patnc Internet Draft and has been demonstrated at the IETF 99 Prague Hackathon. *The IMV database template has been adapted to achieve full compliance with the ISO 19770-2:2015 SWID tag standard. *The pt-tls-client can attach and use TPM 2.0 protected private keys via the --keyid parameter. *By default the /etc/swanctl/conf.d directory is created and *.conf files in it are included in the default swanctl.conf file. *The curl plugin now follows HTTP redirects (configurable via strongswan.conf). *The CHILD_SA rekeying was fixed in charon-tkm and the behavior is refined a bit more since 5.5.3 *libtpmtss supports Intel's TSS2 Architecture Broker and Resource Manager interface (tcti-tabrmd). * more on https://wiki.strongswan.org/versions/66 OBS-URL: https://build.opensuse.org/request/show/521273 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=104
2017-09-05 17:38:01 +02:00
%{_mandir}/man1/pt-tls-client.1*
%{_mandir}/man8/ipsec.8*
%{_mandir}/man5/ipsec.conf.5*
%{_mandir}/man5/ipsec.secrets.5*
- Updated to strongSwan 4.5.0 release, changes since 4.4.1 are: * IMPORTANT: the default keyexchange mode 'ike' is changing with release 4.5 from 'ikev1' to 'ikev2', thus commemorating the five year anniversary of the IKEv2 RFC 4306 and its mature successor RFC 5996. The time has definitively come for IKEv1 to go into retirement and to cede its place to the much more robust, powerful and versatile IKEv2 protocol! * Added new ctr, ccm and gcm plugins providing Counter, Counter with CBC-MAC and Galois/Counter Modes based on existing CBC implementations. These new plugins bring support for AES and Camellia Counter and CCM algorithms and the AES GCM algorithms for use in IKEv2. * The new pkcs11 plugin brings full Smartcard support to the IKEv2 daemon and the pki utility using one or more PKCS#11 libraries. It currently supports RSA private and public key operations and loads X.509 certificates from tokens. * Implemented a general purpose TLS stack based on crypto and credential primitives of libstrongswan. libtls supports TLS versions 1.0, 1.1 and 1.2, ECDHE-ECDSA/RSA, DHE-RSA and RSA key exchange algorithms and RSA/ECDSA based client authentication. * Based on libtls, the eap-tls plugin brings certificate based EAP authentication for client and server. It is compatible to Windows 7 IKEv2 Smartcard authentication and the OpenSSL based FreeRADIUS EAP-TLS backend. * Implemented the TNCCS 1.1 Trusted Network Connect protocol using the libtnc library on the strongSwan client and server side via the tnccs_11 plugin and optionally connecting to a TNC@FHH-enhanced FreeRADIUS AAA server. Depending on the resulting TNC Recommendation, strongSwan clients are granted access to a network behind a strongSwan gateway (allow), are put into a remediation zone (isolate) or are blocked (none), respectively. Any number of Integrity Measurement Collector/Verifier pairs can be attached via the tnc-imc and tnc-imv charon plugins. * The IKEv1 daemon pluto now uses the same kernel interfaces as the IKEv2 daemon charon. As a result of this, pluto now supports xfrm marks which were introduced in charon with 4.4.1. * The RADIUS plugin eap-radius now supports multiple RADIUS servers for redundant setups. Servers are selected by a defined priority, server load and availability. * The simple led plugin controls hardware LEDs through the Linux LED subsystem. It currently shows activity of the IKE daemon and is a good example how to implement a simple event listener. * Improved MOBIKE behavior in several corner cases, for instance, if the initial responder moves to a different address. * Fixed left-/rightnexthop option, which was broken since 4.4.0. * Fixed a bug not releasing a virtual IP address to a pool if the XAUTH identity was different from the IKE identity. * Fixed the alignment of ModeConfig messages on 4-byte boundaries in the case where the attributes are not a multiple of 4 bytes (e.g. Cisco's UNITY_BANNER). * Fixed the interoperability of the socket_raw and socket_default charon plugins. * Added man page for strongswan.conf - Adopted spec file, removed obsolete error range patch. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=20
2010-11-16 13:10:30 +01:00
%{_mandir}/man5/strongswan.conf.5*
%dir %{_libexecdir}/ipsec
%{_libexecdir}/ipsec/_copyright
%{_libexecdir}/ipsec/_updown
%if %{with test}
%{_libexecdir}/ipsec/conftest
%endif
%{_libexecdir}/ipsec/duplicheck
%{_libexecdir}/ipsec/pool
%{_libexecdir}/ipsec/scepclient
%{_libexecdir}/ipsec/starter
%{_libexecdir}/ipsec/stroke
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%{_libexecdir}/ipsec/charon
%{_libexecdir}/ipsec/_imv_policy
%{_libexecdir}/ipsec/imv_policy_manager
%dir %{strongswan_plugins}
%{strongswan_plugins}/libstrongswan-stroke.so
%{strongswan_plugins}/libstrongswan-updown.so
%files doc
%defattr(-,root,root)
%dir %{strongswan_docdir}
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%{strongswan_docdir}/TODO
%{strongswan_docdir}/NEWS
%{strongswan_docdir}/README
%{strongswan_docdir}/COPYING
%{strongswan_docdir}/LICENSE
%{strongswan_docdir}/AUTHORS
%{strongswan_docdir}/ChangeLog
%{_mandir}/man8/scepclient.8*
Accepting request 513652 from home:ndas:branches:network:vpn - Updated to strongSwan 5.3.5 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures. More specifically, mpz_powm_sec() has two requirements regarding the passed exponent and modulus that the plugin did not enforce, if these are not met the calculation will result in a floating point exception that crashes the whole process. This vulnerability has been registered as CVE-2017-9022. Please refer to our blog for details. *Fixed a DoS vulnerability in the x509 plugin that was caused because the ASN.1 parser didn't handle ASN.1 CHOICE types properly, which could result in an infinite loop when parsing X.509 extensions that use such types. This vulnerability has been registered as CVE-2017-9023. Please refer to our blog for details. *The behavior during IKEv2 CHILD_SA rekeying has been changed in order to avoid traffic loss. When responding to a CREATE_CHILD_SA request to rekey a CHILD_SA the responder already has everything available to install and use the new CHILD_SA. However, this could lead to lost traffic as the initiator won't be able to process inbound packets until it processed the CREATE_CHILD_SA response and updated the inbound SA. To avoid this the responder now only installs the new inbound SA and delays installing the outbound SA until it receives the DELETE for the replaced CHILD_SA. *The messages transporting these DELETEs could reach the peer before packets sent with the deleted outbound SAs reach it. To reduce the chance of traffic loss due to this the inbound SA of the replaced CHILD_SA is not removed for a configurable amount of seconds (charon.delete_rekeyed_delay) after the DELETE has been processed. *The code base has been ported to Apple's ARM64 iOS platform, which required several changes regarding the use of variadic functions. This was necessary because the calling conventions for variadic and regular functions are different there. This means that assigning a non-variadic function to a variadic function pointer, as we did with our enumerator_t::enumerate() implementations and several callbacks, will result in crashes as the called function accesses the arguments differently than the OBS-URL: https://build.opensuse.org/request/show/513652 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=99
2017-08-01 09:21:05 +02:00
%{_mandir}/man5/swanctl.conf.5.*
%{_mandir}/man8/swanctl.8.*
%files libs0
%defattr(-,root,root)
%if %{with systemd}
%{_tmpfilesdir}/%{name}.conf
%endif
%config(noreplace) %attr(600,root,root) %{_sysconfdir}/strongswan.conf
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%dir %{strongswan_configs}
%dir %{strongswan_configs}/charon
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon-logging.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/imcv.conf
- Updated to strongSwan 5.2.2 providing the following changes: Changes in version 5.2.2: * Fixed a denial-of-service vulnerability triggered by an IKEv2 Key Exchange payload that contains the Diffie-Hellman group 1025. This identifier was used internally for DH groups with custom generator and prime. Because these arguments are missing when creating DH objects based on the KE payload an invalid pointer dereference occurred. This allowed an attacker to crash the IKE daemon with a single IKE_SA_INIT message containing such a KE payload. The vulnerability has been registered as CVE-2014-9221. * The left/rightid options in ipsec.conf, or any other identity in strongSwan, now accept prefixes to enforce an explicit type, such as email: or fqdn:. Note that no conversion is done for the remaining string, refer to ipsec.conf(5) for details. * The post-quantum Bimodal Lattice Signature Scheme (BLISS) can be used as an IKEv2 public key authentication method. The pki tool offers full support for the generation of BLISS key pairs and certificates. * Fixed mapping of integrity algorithms negotiated for AH via IKEv1. This could cause interoperability issues when connecting to older versions of charon. Changes in version 5.2.1: * The new charon-systemd IKE daemon implements an IKE daemon tailored for use with systemd. It avoids the dependency on ipsec starter and uses swanctl as configuration backend, building a simple and lightweight solution. It supports native systemd journal logging. * Support for IKEv2 fragmentation as per RFC 7383 has been added. Like IKEv1 fragmentation it can be enabled by setting fragmentation=yes in ipsec.conf. * Support of the TCG TNC IF-M Attribute Segmentation specification proposal. All attributes can be segmented. Additionally TCG/SWID Tag, TCG/SWID Tag ID and IETF/Installed Packages attributes can be processed incrementally on a per segment basis. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=85
2015-01-05 15:41:37 +01:00
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/pki.conf
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/pool.conf
- Updated to strongSwan 5.2.2 providing the following changes: Changes in version 5.2.2: * Fixed a denial-of-service vulnerability triggered by an IKEv2 Key Exchange payload that contains the Diffie-Hellman group 1025. This identifier was used internally for DH groups with custom generator and prime. Because these arguments are missing when creating DH objects based on the KE payload an invalid pointer dereference occurred. This allowed an attacker to crash the IKE daemon with a single IKE_SA_INIT message containing such a KE payload. The vulnerability has been registered as CVE-2014-9221. * The left/rightid options in ipsec.conf, or any other identity in strongSwan, now accept prefixes to enforce an explicit type, such as email: or fqdn:. Note that no conversion is done for the remaining string, refer to ipsec.conf(5) for details. * The post-quantum Bimodal Lattice Signature Scheme (BLISS) can be used as an IKEv2 public key authentication method. The pki tool offers full support for the generation of BLISS key pairs and certificates. * Fixed mapping of integrity algorithms negotiated for AH via IKEv1. This could cause interoperability issues when connecting to older versions of charon. Changes in version 5.2.1: * The new charon-systemd IKE daemon implements an IKE daemon tailored for use with systemd. It avoids the dependency on ipsec starter and uses swanctl as configuration backend, building a simple and lightweight solution. It supports native systemd journal logging. * Support for IKEv2 fragmentation as per RFC 7383 has been added. Like IKEv1 fragmentation it can be enabled by setting fragmentation=yes in ipsec.conf. * Support of the TCG TNC IF-M Attribute Segmentation specification proposal. All attributes can be segmented. Additionally TCG/SWID Tag, TCG/SWID Tag ID and IETF/Installed Packages attributes can be processed incrementally on a per segment basis. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=85
2015-01-05 15:41:37 +01:00
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/scepclient.conf
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/starter.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/tnc.conf
Accepting request 513652 from home:ndas:branches:network:vpn - Updated to strongSwan 5.3.5 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures. More specifically, mpz_powm_sec() has two requirements regarding the passed exponent and modulus that the plugin did not enforce, if these are not met the calculation will result in a floating point exception that crashes the whole process. This vulnerability has been registered as CVE-2017-9022. Please refer to our blog for details. *Fixed a DoS vulnerability in the x509 plugin that was caused because the ASN.1 parser didn't handle ASN.1 CHOICE types properly, which could result in an infinite loop when parsing X.509 extensions that use such types. This vulnerability has been registered as CVE-2017-9023. Please refer to our blog for details. *The behavior during IKEv2 CHILD_SA rekeying has been changed in order to avoid traffic loss. When responding to a CREATE_CHILD_SA request to rekey a CHILD_SA the responder already has everything available to install and use the new CHILD_SA. However, this could lead to lost traffic as the initiator won't be able to process inbound packets until it processed the CREATE_CHILD_SA response and updated the inbound SA. To avoid this the responder now only installs the new inbound SA and delays installing the outbound SA until it receives the DELETE for the replaced CHILD_SA. *The messages transporting these DELETEs could reach the peer before packets sent with the deleted outbound SAs reach it. To reduce the chance of traffic loss due to this the inbound SA of the replaced CHILD_SA is not removed for a configurable amount of seconds (charon.delete_rekeyed_delay) after the DELETE has been processed. *The code base has been ported to Apple's ARM64 iOS platform, which required several changes regarding the use of variadic functions. This was necessary because the calling conventions for variadic and regular functions are different there. This means that assigning a non-variadic function to a variadic function pointer, as we did with our enumerator_t::enumerate() implementations and several callbacks, will result in crashes as the called function accesses the arguments differently than the OBS-URL: https://build.opensuse.org/request/show/513652 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=99
2017-08-01 09:21:05 +02:00
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/swanctl.conf
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/addrblock.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/aes.conf
Accepting request 513652 from home:ndas:branches:network:vpn - Updated to strongSwan 5.3.5 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures. More specifically, mpz_powm_sec() has two requirements regarding the passed exponent and modulus that the plugin did not enforce, if these are not met the calculation will result in a floating point exception that crashes the whole process. This vulnerability has been registered as CVE-2017-9022. Please refer to our blog for details. *Fixed a DoS vulnerability in the x509 plugin that was caused because the ASN.1 parser didn't handle ASN.1 CHOICE types properly, which could result in an infinite loop when parsing X.509 extensions that use such types. This vulnerability has been registered as CVE-2017-9023. Please refer to our blog for details. *The behavior during IKEv2 CHILD_SA rekeying has been changed in order to avoid traffic loss. When responding to a CREATE_CHILD_SA request to rekey a CHILD_SA the responder already has everything available to install and use the new CHILD_SA. However, this could lead to lost traffic as the initiator won't be able to process inbound packets until it processed the CREATE_CHILD_SA response and updated the inbound SA. To avoid this the responder now only installs the new inbound SA and delays installing the outbound SA until it receives the DELETE for the replaced CHILD_SA. *The messages transporting these DELETEs could reach the peer before packets sent with the deleted outbound SAs reach it. To reduce the chance of traffic loss due to this the inbound SA of the replaced CHILD_SA is not removed for a configurable amount of seconds (charon.delete_rekeyed_delay) after the DELETE has been processed. *The code base has been ported to Apple's ARM64 iOS platform, which required several changes regarding the use of variadic functions. This was necessary because the calling conventions for variadic and regular functions are different there. This means that assigning a non-variadic function to a variadic function pointer, as we did with our enumerator_t::enumerate() implementations and several callbacks, will result in crashes as the called function accesses the arguments differently than the OBS-URL: https://build.opensuse.org/request/show/513652 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=99
2017-08-01 09:21:05 +02:00
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/curve25519.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/vici.conf
%if %{with afalg}
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/af-alg.conf
%endif
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/agent.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/attr.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/attr-sql.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/blowfish.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/ccm.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/certexpire.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/cmac.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/constraints.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/coupling.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/ctr.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/curl.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/des.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/dhcp.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/dnskey.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/duplicheck.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-aka-3gpp2.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-aka.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-dynamic.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-gtc.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-identity.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-md5.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-mschapv2.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-peap.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-radius.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-simaka-pseudonym.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-simaka-reauth.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-simaka-sql.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-sim.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-sim-file.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-sim-pcsc.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-tls.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-tnc.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/eap-ttls.conf
%if %{with farp}
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/farp.conf
%endif
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/fips-prf.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/gcm.conf
%if %{with gcrypt}
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/gcrypt.conf
%endif
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/gmp.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/ha.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/hmac.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/kernel-netlink.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/ldap.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/led.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/md4.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/md5.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/nonce.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/openssl.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/pem.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/pgp.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/pkcs11.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/pkcs12.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/pkcs1.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/pkcs7.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/pkcs8.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/pubkey.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/radattr.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/random.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/rc2.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/resolve.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/revocation.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/sha1.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/sha2.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/smp.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/socket-default.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/soup.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/sql.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/sshkey.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/stroke.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/tnccs-11.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/tnccs-20.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/tnccs-dynamic.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/tnc-imc.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/tnc-imv.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/tnc-pdp.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/tnc-tnccs.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/unity.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/updown.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/x509.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/xauth-eap.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/xauth-generic.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/xauth-pam.conf
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/xcbc.conf
%dir %{strongswan_libdir}
%if %{with integrity}
%{strongswan_libdir}/libchecksum.so
%endif
%{strongswan_libdir}/libcharon.so.*
Accepting request 513652 from home:ndas:branches:network:vpn - Updated to strongSwan 5.3.5 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures. More specifically, mpz_powm_sec() has two requirements regarding the passed exponent and modulus that the plugin did not enforce, if these are not met the calculation will result in a floating point exception that crashes the whole process. This vulnerability has been registered as CVE-2017-9022. Please refer to our blog for details. *Fixed a DoS vulnerability in the x509 plugin that was caused because the ASN.1 parser didn't handle ASN.1 CHOICE types properly, which could result in an infinite loop when parsing X.509 extensions that use such types. This vulnerability has been registered as CVE-2017-9023. Please refer to our blog for details. *The behavior during IKEv2 CHILD_SA rekeying has been changed in order to avoid traffic loss. When responding to a CREATE_CHILD_SA request to rekey a CHILD_SA the responder already has everything available to install and use the new CHILD_SA. However, this could lead to lost traffic as the initiator won't be able to process inbound packets until it processed the CREATE_CHILD_SA response and updated the inbound SA. To avoid this the responder now only installs the new inbound SA and delays installing the outbound SA until it receives the DELETE for the replaced CHILD_SA. *The messages transporting these DELETEs could reach the peer before packets sent with the deleted outbound SAs reach it. To reduce the chance of traffic loss due to this the inbound SA of the replaced CHILD_SA is not removed for a configurable amount of seconds (charon.delete_rekeyed_delay) after the DELETE has been processed. *The code base has been ported to Apple's ARM64 iOS platform, which required several changes regarding the use of variadic functions. This was necessary because the calling conventions for variadic and regular functions are different there. This means that assigning a non-variadic function to a variadic function pointer, as we did with our enumerator_t::enumerate() implementations and several callbacks, will result in crashes as the called function accesses the arguments differently than the OBS-URL: https://build.opensuse.org/request/show/513652 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=99
2017-08-01 09:21:05 +02:00
%{strongswan_libdir}/libtpmtss.so.*
%{strongswan_libdir}/libtpmtss.so
%{strongswan_libdir}/libvici.so
%{strongswan_libdir}/libvici.so.*
%{strongswan_libdir}/libpttls.so.*
%{strongswan_libdir}/libradius.so.*
%{strongswan_libdir}/libsimaka.so.*
%{strongswan_libdir}/libstrongswan.so.*
%{strongswan_libdir}/libtls.so.*
%{strongswan_libdir}/libtnccs.so.*
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%{strongswan_libdir}/libimcv.so.*
%dir %{strongswan_libdir}/imcvs
%{strongswan_libdir}/imcvs/imc-scanner.so
%{strongswan_libdir}/imcvs/imc-test.so
%{strongswan_libdir}/imcvs/imv-scanner.so
%{strongswan_libdir}/imcvs/imv-test.so
%dir %{strongswan_plugins}
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
%{strongswan_plugins}/libstrongswan-addrblock.so
%{strongswan_plugins}/libstrongswan-aes.so
%if %{with afalg}
%{strongswan_plugins}/libstrongswan-af-alg.so
%endif
%{strongswan_plugins}/libstrongswan-agent.so
%{strongswan_plugins}/libstrongswan-attr.so
%{strongswan_plugins}/libstrongswan-attr-sql.so
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
%{strongswan_plugins}/libstrongswan-blowfish.so
%{strongswan_plugins}/libstrongswan-ccm.so
%{strongswan_plugins}/libstrongswan-certexpire.so
- Updated to strongSwan 4.6.3 release: - The tnc-pdp plugin implements a RADIUS server interface allowing a strongSwan TNC server to act as a Policy Decision Point. - The eap-radius authentication backend enforces Session-Timeout attributes using RFC4478 repeated authentication and acts upon RADIUS Dynamic Authorization extensions, RFC 5176. Currently supported are disconnect requests and CoA messages containing a Session-Timeout. - The eap-radius plugin can forward arbitrary RADIUS attributes from and to clients using custom IKEv2 notify payloads. The new radattr plugin reads attributes to include from files and prints received attributes to the console. - Added support for untruncated MD5 and SHA1 HMACs in ESP as used in RFC 4595. - The cmac plugin implements the AES-CMAC-96 and AES-CMAC-PRF-128 algorithms as defined in RFC 4494 and RFC 4615, respectively. - The resolve plugin automatically installs nameservers via resolvconf(8), if it is installed, instead of modifying /etc/resolv.conf directly. - The IKEv2 charon daemon supports now raw RSA public keys in RFC 3110 DNSKEY and PKCS#1 file format. - The farp plugin sends ARP responses for any tunneled address, not only virtual IPs. - Charon resolves hosts again during additional keying tries. - Fixed switching back to original address pair during MOBIKE. - When resending IKE_SA_INIT with a COOKIE charon reuses the previous DH value, as specified in RFC 5996. This has an effect on the lifecycle of diffie_hellman_t, see source:src/libcharon/sa/keymat.h#39 for details. - COOKIEs are now kept enabled a bit longer to avoid certain race OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=44
2012-05-10 12:02:51 +02:00
%{strongswan_plugins}/libstrongswan-cmac.so
%{strongswan_plugins}/libstrongswan-constraints.so
%{strongswan_plugins}/libstrongswan-coupling.so
%{strongswan_plugins}/libstrongswan-ctr.so
%{strongswan_plugins}/libstrongswan-curl.so
%{strongswan_plugins}/libstrongswan-des.so
%{strongswan_plugins}/libstrongswan-dhcp.so
%{strongswan_plugins}/libstrongswan-dnskey.so
%{strongswan_plugins}/libstrongswan-duplicheck.so
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
%{strongswan_plugins}/libstrongswan-eap-aka-3gpp2.so
%{strongswan_plugins}/libstrongswan-eap-aka.so
%{strongswan_plugins}/libstrongswan-eap-dynamic.so
%{strongswan_plugins}/libstrongswan-eap-gtc.so
%{strongswan_plugins}/libstrongswan-eap-identity.so
%{strongswan_plugins}/libstrongswan-eap-md5.so
%{strongswan_plugins}/libstrongswan-eap-mschapv2.so
%{strongswan_plugins}/libstrongswan-eap-peap.so
%{strongswan_plugins}/libstrongswan-eap-radius.so
%{strongswan_plugins}/libstrongswan-eap-sim-file.so
%{strongswan_plugins}/libstrongswan-eap-sim-pcsc.so
%{strongswan_plugins}/libstrongswan-eap-sim.so
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
%{strongswan_plugins}/libstrongswan-eap-simaka-pseudonym.so
%{strongswan_plugins}/libstrongswan-eap-simaka-reauth.so
%{strongswan_plugins}/libstrongswan-eap-simaka-sql.so
%{strongswan_plugins}/libstrongswan-eap-tls.so
%{strongswan_plugins}/libstrongswan-eap-tnc.so
%{strongswan_plugins}/libstrongswan-eap-ttls.so
%if %{with farp}
%{strongswan_plugins}/libstrongswan-farp.so
%endif
%{strongswan_plugins}/libstrongswan-fips-prf.so
%{strongswan_plugins}/libstrongswan-gcm.so
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with gcrypt}
%{strongswan_plugins}/libstrongswan-gcrypt.so
%endif
%{strongswan_plugins}/libstrongswan-gmp.so
%{strongswan_plugins}/libstrongswan-ha.so
%{strongswan_plugins}/libstrongswan-hmac.so
%{strongswan_plugins}/libstrongswan-kernel-netlink.so
%{strongswan_plugins}/libstrongswan-ldap.so
%{strongswan_plugins}/libstrongswan-led.so
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
%{strongswan_plugins}/libstrongswan-md4.so
%{strongswan_plugins}/libstrongswan-md5.so
%{strongswan_plugins}/libstrongswan-nonce.so
%{strongswan_plugins}/libstrongswan-openssl.so
%{strongswan_plugins}/libstrongswan-pem.so
%{strongswan_plugins}/libstrongswan-pgp.so
%{strongswan_plugins}/libstrongswan-pkcs1.so
%{strongswan_plugins}/libstrongswan-pkcs11.so
%{strongswan_plugins}/libstrongswan-pkcs12.so
%{strongswan_plugins}/libstrongswan-pkcs7.so
%{strongswan_plugins}/libstrongswan-pkcs8.so
%{strongswan_plugins}/libstrongswan-pubkey.so
%{strongswan_plugins}/libstrongswan-radattr.so
%{strongswan_plugins}/libstrongswan-random.so
%{strongswan_plugins}/libstrongswan-rc2.so
%{strongswan_plugins}/libstrongswan-resolve.so
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
%{strongswan_plugins}/libstrongswan-revocation.so
%{strongswan_plugins}/libstrongswan-sha1.so
%{strongswan_plugins}/libstrongswan-sha2.so
%{strongswan_plugins}/libstrongswan-smp.so
%{strongswan_plugins}/libstrongswan-socket-default.so
%{strongswan_plugins}/libstrongswan-soup.so
%{strongswan_plugins}/libstrongswan-sql.so
%{strongswan_plugins}/libstrongswan-sshkey.so
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%{strongswan_plugins}/libstrongswan-tnc-imc.so
%{strongswan_plugins}/libstrongswan-tnc-imv.so
%{strongswan_plugins}/libstrongswan-tnc-pdp.so
%{strongswan_plugins}/libstrongswan-tnc-tnccs.so
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%{strongswan_plugins}/libstrongswan-tnccs-11.so
%{strongswan_plugins}/libstrongswan-tnccs-20.so
%{strongswan_plugins}/libstrongswan-tnccs-dynamic.so
%{strongswan_plugins}/libstrongswan-unity.so
%{strongswan_plugins}/libstrongswan-x509.so
%{strongswan_plugins}/libstrongswan-xauth-eap.so
%{strongswan_plugins}/libstrongswan-xauth-generic.so
%{strongswan_plugins}/libstrongswan-xauth-pam.so
%{strongswan_plugins}/libstrongswan-xcbc.so
Accepting request 513652 from home:ndas:branches:network:vpn - Updated to strongSwan 5.3.5 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures. More specifically, mpz_powm_sec() has two requirements regarding the passed exponent and modulus that the plugin did not enforce, if these are not met the calculation will result in a floating point exception that crashes the whole process. This vulnerability has been registered as CVE-2017-9022. Please refer to our blog for details. *Fixed a DoS vulnerability in the x509 plugin that was caused because the ASN.1 parser didn't handle ASN.1 CHOICE types properly, which could result in an infinite loop when parsing X.509 extensions that use such types. This vulnerability has been registered as CVE-2017-9023. Please refer to our blog for details. *The behavior during IKEv2 CHILD_SA rekeying has been changed in order to avoid traffic loss. When responding to a CREATE_CHILD_SA request to rekey a CHILD_SA the responder already has everything available to install and use the new CHILD_SA. However, this could lead to lost traffic as the initiator won't be able to process inbound packets until it processed the CREATE_CHILD_SA response and updated the inbound SA. To avoid this the responder now only installs the new inbound SA and delays installing the outbound SA until it receives the DELETE for the replaced CHILD_SA. *The messages transporting these DELETEs could reach the peer before packets sent with the deleted outbound SAs reach it. To reduce the chance of traffic loss due to this the inbound SA of the replaced CHILD_SA is not removed for a configurable amount of seconds (charon.delete_rekeyed_delay) after the DELETE has been processed. *The code base has been ported to Apple's ARM64 iOS platform, which required several changes regarding the use of variadic functions. This was necessary because the calling conventions for variadic and regular functions are different there. This means that assigning a non-variadic function to a variadic function pointer, as we did with our enumerator_t::enumerate() implementations and several callbacks, will result in crashes as the called function accesses the arguments differently than the OBS-URL: https://build.opensuse.org/request/show/513652 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=99
2017-08-01 09:21:05 +02:00
%{strongswan_plugins}/libstrongswan-curve25519.so
%{strongswan_plugins}/libstrongswan-vici.so
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%dir %{strongswan_datadir}
%dir %{strongswan_templates}
%dir %{strongswan_templates}/config
%dir %{strongswan_templates}/config/plugins
%dir %{strongswan_templates}/config/strongswan.d
%dir %{strongswan_templates}/database
%dir %{strongswan_templates}/database/imv
%dir %{strongswan_templates}/database/sql
%{strongswan_templates}/config/strongswan.conf
%{strongswan_templates}/config/plugins/addrblock.conf
%{strongswan_templates}/config/plugins/aes.conf
%if %{with afalg}
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%{strongswan_templates}/config/plugins/af-alg.conf
%endif
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%{strongswan_templates}/config/plugins/agent.conf
%{strongswan_templates}/config/plugins/attr-sql.conf
%{strongswan_templates}/config/plugins/attr.conf
%{strongswan_templates}/config/plugins/blowfish.conf
%{strongswan_templates}/config/plugins/ccm.conf
%{strongswan_templates}/config/plugins/certexpire.conf
%{strongswan_templates}/config/plugins/cmac.conf
%{strongswan_templates}/config/plugins/constraints.conf
%{strongswan_templates}/config/plugins/coupling.conf
%{strongswan_templates}/config/plugins/ctr.conf
%{strongswan_templates}/config/plugins/curl.conf
%{strongswan_templates}/config/plugins/des.conf
%{strongswan_templates}/config/plugins/dhcp.conf
%{strongswan_templates}/config/plugins/dnskey.conf
%{strongswan_templates}/config/plugins/duplicheck.conf
%{strongswan_templates}/config/plugins/eap-aka-3gpp2.conf
%{strongswan_templates}/config/plugins/eap-aka.conf
%{strongswan_templates}/config/plugins/eap-dynamic.conf
%{strongswan_templates}/config/plugins/eap-gtc.conf
%{strongswan_templates}/config/plugins/eap-identity.conf
%{strongswan_templates}/config/plugins/eap-md5.conf
%{strongswan_templates}/config/plugins/eap-mschapv2.conf
%{strongswan_templates}/config/plugins/eap-peap.conf
%{strongswan_templates}/config/plugins/eap-radius.conf
%{strongswan_templates}/config/plugins/eap-sim-file.conf
%{strongswan_templates}/config/plugins/eap-sim-pcsc.conf
%{strongswan_templates}/config/plugins/eap-sim.conf
%{strongswan_templates}/config/plugins/eap-simaka-pseudonym.conf
%{strongswan_templates}/config/plugins/eap-simaka-reauth.conf
%{strongswan_templates}/config/plugins/eap-simaka-sql.conf
%{strongswan_templates}/config/plugins/eap-tls.conf
%{strongswan_templates}/config/plugins/eap-tnc.conf
%{strongswan_templates}/config/plugins/eap-ttls.conf
%if %{with farp}
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%{strongswan_templates}/config/plugins/farp.conf
%endif
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%{strongswan_templates}/config/plugins/fips-prf.conf
%{strongswan_templates}/config/plugins/gcm.conf
%if %{with gcrypt}
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%{strongswan_templates}/config/plugins/gcrypt.conf
%endif
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%{strongswan_templates}/config/plugins/gmp.conf
%{strongswan_templates}/config/plugins/ha.conf
%{strongswan_templates}/config/plugins/hmac.conf
%{strongswan_templates}/config/plugins/kernel-netlink.conf
%{strongswan_templates}/config/plugins/ldap.conf
%{strongswan_templates}/config/plugins/led.conf
%{strongswan_templates}/config/plugins/md4.conf
%{strongswan_templates}/config/plugins/md5.conf
%{strongswan_templates}/config/plugins/nonce.conf
%{strongswan_templates}/config/plugins/openssl.conf
%{strongswan_templates}/config/plugins/pem.conf
%{strongswan_templates}/config/plugins/pgp.conf
%{strongswan_templates}/config/plugins/pkcs1.conf
%{strongswan_templates}/config/plugins/pkcs11.conf
%{strongswan_templates}/config/plugins/pkcs12.conf
%{strongswan_templates}/config/plugins/pkcs7.conf
%{strongswan_templates}/config/plugins/pkcs8.conf
%{strongswan_templates}/config/plugins/pubkey.conf
%{strongswan_templates}/config/plugins/radattr.conf
%{strongswan_templates}/config/plugins/random.conf
%{strongswan_templates}/config/plugins/rc2.conf
%{strongswan_templates}/config/plugins/resolve.conf
%{strongswan_templates}/config/plugins/revocation.conf
%{strongswan_templates}/config/plugins/sha1.conf
%{strongswan_templates}/config/plugins/sha2.conf
%{strongswan_templates}/config/plugins/smp.conf
%{strongswan_templates}/config/plugins/socket-default.conf
%{strongswan_templates}/config/plugins/soup.conf
%{strongswan_templates}/config/plugins/sql.conf
%{strongswan_templates}/config/plugins/sshkey.conf
%{strongswan_templates}/config/plugins/stroke.conf
%{strongswan_templates}/config/plugins/tnc-imc.conf
%{strongswan_templates}/config/plugins/tnc-imv.conf
%{strongswan_templates}/config/plugins/tnc-pdp.conf
%{strongswan_templates}/config/plugins/tnc-tnccs.conf
%{strongswan_templates}/config/plugins/tnccs-11.conf
%{strongswan_templates}/config/plugins/tnccs-20.conf
%{strongswan_templates}/config/plugins/tnccs-dynamic.conf
%{strongswan_templates}/config/plugins/unity.conf
%{strongswan_templates}/config/plugins/updown.conf
%{strongswan_templates}/config/plugins/x509.conf
%{strongswan_templates}/config/plugins/xauth-eap.conf
%{strongswan_templates}/config/plugins/xauth-generic.conf
%{strongswan_templates}/config/plugins/xauth-pam.conf
%{strongswan_templates}/config/plugins/xcbc.conf
Accepting request 513652 from home:ndas:branches:network:vpn - Updated to strongSwan 5.3.5 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures. More specifically, mpz_powm_sec() has two requirements regarding the passed exponent and modulus that the plugin did not enforce, if these are not met the calculation will result in a floating point exception that crashes the whole process. This vulnerability has been registered as CVE-2017-9022. Please refer to our blog for details. *Fixed a DoS vulnerability in the x509 plugin that was caused because the ASN.1 parser didn't handle ASN.1 CHOICE types properly, which could result in an infinite loop when parsing X.509 extensions that use such types. This vulnerability has been registered as CVE-2017-9023. Please refer to our blog for details. *The behavior during IKEv2 CHILD_SA rekeying has been changed in order to avoid traffic loss. When responding to a CREATE_CHILD_SA request to rekey a CHILD_SA the responder already has everything available to install and use the new CHILD_SA. However, this could lead to lost traffic as the initiator won't be able to process inbound packets until it processed the CREATE_CHILD_SA response and updated the inbound SA. To avoid this the responder now only installs the new inbound SA and delays installing the outbound SA until it receives the DELETE for the replaced CHILD_SA. *The messages transporting these DELETEs could reach the peer before packets sent with the deleted outbound SAs reach it. To reduce the chance of traffic loss due to this the inbound SA of the replaced CHILD_SA is not removed for a configurable amount of seconds (charon.delete_rekeyed_delay) after the DELETE has been processed. *The code base has been ported to Apple's ARM64 iOS platform, which required several changes regarding the use of variadic functions. This was necessary because the calling conventions for variadic and regular functions are different there. This means that assigning a non-variadic function to a variadic function pointer, as we did with our enumerator_t::enumerate() implementations and several callbacks, will result in crashes as the called function accesses the arguments differently than the OBS-URL: https://build.opensuse.org/request/show/513652 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=99
2017-08-01 09:21:05 +02:00
%{strongswan_templates}/config/plugins/curve25519.conf
%{strongswan_templates}/config/plugins/vici.conf
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%{strongswan_templates}/config/strongswan.d/charon-logging.conf
%{strongswan_templates}/config/strongswan.d/charon.conf
%{strongswan_templates}/config/strongswan.d/imcv.conf
- Updated to strongSwan 5.2.2 providing the following changes: Changes in version 5.2.2: * Fixed a denial-of-service vulnerability triggered by an IKEv2 Key Exchange payload that contains the Diffie-Hellman group 1025. This identifier was used internally for DH groups with custom generator and prime. Because these arguments are missing when creating DH objects based on the KE payload an invalid pointer dereference occurred. This allowed an attacker to crash the IKE daemon with a single IKE_SA_INIT message containing such a KE payload. The vulnerability has been registered as CVE-2014-9221. * The left/rightid options in ipsec.conf, or any other identity in strongSwan, now accept prefixes to enforce an explicit type, such as email: or fqdn:. Note that no conversion is done for the remaining string, refer to ipsec.conf(5) for details. * The post-quantum Bimodal Lattice Signature Scheme (BLISS) can be used as an IKEv2 public key authentication method. The pki tool offers full support for the generation of BLISS key pairs and certificates. * Fixed mapping of integrity algorithms negotiated for AH via IKEv1. This could cause interoperability issues when connecting to older versions of charon. Changes in version 5.2.1: * The new charon-systemd IKE daemon implements an IKE daemon tailored for use with systemd. It avoids the dependency on ipsec starter and uses swanctl as configuration backend, building a simple and lightweight solution. It supports native systemd journal logging. * Support for IKEv2 fragmentation as per RFC 7383 has been added. Like IKEv1 fragmentation it can be enabled by setting fragmentation=yes in ipsec.conf. * Support of the TCG TNC IF-M Attribute Segmentation specification proposal. All attributes can be segmented. Additionally TCG/SWID Tag, TCG/SWID Tag ID and IETF/Installed Packages attributes can be processed incrementally on a per segment basis. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=85
2015-01-05 15:41:37 +01:00
%{strongswan_templates}/config/strongswan.d/pki.conf
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%{strongswan_templates}/config/strongswan.d/pool.conf
- Updated to strongSwan 5.2.2 providing the following changes: Changes in version 5.2.2: * Fixed a denial-of-service vulnerability triggered by an IKEv2 Key Exchange payload that contains the Diffie-Hellman group 1025. This identifier was used internally for DH groups with custom generator and prime. Because these arguments are missing when creating DH objects based on the KE payload an invalid pointer dereference occurred. This allowed an attacker to crash the IKE daemon with a single IKE_SA_INIT message containing such a KE payload. The vulnerability has been registered as CVE-2014-9221. * The left/rightid options in ipsec.conf, or any other identity in strongSwan, now accept prefixes to enforce an explicit type, such as email: or fqdn:. Note that no conversion is done for the remaining string, refer to ipsec.conf(5) for details. * The post-quantum Bimodal Lattice Signature Scheme (BLISS) can be used as an IKEv2 public key authentication method. The pki tool offers full support for the generation of BLISS key pairs and certificates. * Fixed mapping of integrity algorithms negotiated for AH via IKEv1. This could cause interoperability issues when connecting to older versions of charon. Changes in version 5.2.1: * The new charon-systemd IKE daemon implements an IKE daemon tailored for use with systemd. It avoids the dependency on ipsec starter and uses swanctl as configuration backend, building a simple and lightweight solution. It supports native systemd journal logging. * Support for IKEv2 fragmentation as per RFC 7383 has been added. Like IKEv1 fragmentation it can be enabled by setting fragmentation=yes in ipsec.conf. * Support of the TCG TNC IF-M Attribute Segmentation specification proposal. All attributes can be segmented. Additionally TCG/SWID Tag, TCG/SWID Tag ID and IETF/Installed Packages attributes can be processed incrementally on a per segment basis. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=85
2015-01-05 15:41:37 +01:00
%{strongswan_templates}/config/strongswan.d/scepclient.conf
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%{strongswan_templates}/config/strongswan.d/starter.conf
%{strongswan_templates}/config/strongswan.d/tnc.conf
Accepting request 513652 from home:ndas:branches:network:vpn - Updated to strongSwan 5.3.5 providing the following changes: *Fixed a DoS vulnerability in the gmp plugin that was caused by insufficient input validation when verifying RSA signatures. More specifically, mpz_powm_sec() has two requirements regarding the passed exponent and modulus that the plugin did not enforce, if these are not met the calculation will result in a floating point exception that crashes the whole process. This vulnerability has been registered as CVE-2017-9022. Please refer to our blog for details. *Fixed a DoS vulnerability in the x509 plugin that was caused because the ASN.1 parser didn't handle ASN.1 CHOICE types properly, which could result in an infinite loop when parsing X.509 extensions that use such types. This vulnerability has been registered as CVE-2017-9023. Please refer to our blog for details. *The behavior during IKEv2 CHILD_SA rekeying has been changed in order to avoid traffic loss. When responding to a CREATE_CHILD_SA request to rekey a CHILD_SA the responder already has everything available to install and use the new CHILD_SA. However, this could lead to lost traffic as the initiator won't be able to process inbound packets until it processed the CREATE_CHILD_SA response and updated the inbound SA. To avoid this the responder now only installs the new inbound SA and delays installing the outbound SA until it receives the DELETE for the replaced CHILD_SA. *The messages transporting these DELETEs could reach the peer before packets sent with the deleted outbound SAs reach it. To reduce the chance of traffic loss due to this the inbound SA of the replaced CHILD_SA is not removed for a configurable amount of seconds (charon.delete_rekeyed_delay) after the DELETE has been processed. *The code base has been ported to Apple's ARM64 iOS platform, which required several changes regarding the use of variadic functions. This was necessary because the calling conventions for variadic and regular functions are different there. This means that assigning a non-variadic function to a variadic function pointer, as we did with our enumerator_t::enumerate() implementations and several callbacks, will result in crashes as the called function accesses the arguments differently than the OBS-URL: https://build.opensuse.org/request/show/513652 OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=99
2017-08-01 09:21:05 +02:00
%{strongswan_templates}/config/strongswan.d/swanctl.conf
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%{strongswan_templates}/database/imv/data.sql
%{strongswan_templates}/database/imv/tables.sql
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with nm}
%files nm
%defattr(-,root,root)
%dir %{_libexecdir}/ipsec
%dir %{strongswan_plugins}
%{_libexecdir}/ipsec/charon-nm
%endif
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with mysql}
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
%files mysql
%defattr(-,root,root)
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%dir %{strongswan_libdir}
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
%dir %{strongswan_plugins}
%{strongswan_plugins}/libstrongswan-mysql.so
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%dir %{strongswan_configs}
%dir %{strongswan_configs}/charon
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/mysql.conf
%dir %{strongswan_datadir}
%dir %{strongswan_templates}
%dir %{strongswan_templates}/config
%dir %{strongswan_templates}/config/plugins
%dir %{strongswan_templates}/database
%dir %{strongswan_templates}/database/sql
%{strongswan_templates}/config/plugins/mysql.conf
- Updated to strongSwan 5.2.2 providing the following changes: Changes in version 5.2.2: * Fixed a denial-of-service vulnerability triggered by an IKEv2 Key Exchange payload that contains the Diffie-Hellman group 1025. This identifier was used internally for DH groups with custom generator and prime. Because these arguments are missing when creating DH objects based on the KE payload an invalid pointer dereference occurred. This allowed an attacker to crash the IKE daemon with a single IKE_SA_INIT message containing such a KE payload. The vulnerability has been registered as CVE-2014-9221. * The left/rightid options in ipsec.conf, or any other identity in strongSwan, now accept prefixes to enforce an explicit type, such as email: or fqdn:. Note that no conversion is done for the remaining string, refer to ipsec.conf(5) for details. * The post-quantum Bimodal Lattice Signature Scheme (BLISS) can be used as an IKEv2 public key authentication method. The pki tool offers full support for the generation of BLISS key pairs and certificates. * Fixed mapping of integrity algorithms negotiated for AH via IKEv1. This could cause interoperability issues when connecting to older versions of charon. Changes in version 5.2.1: * The new charon-systemd IKE daemon implements an IKE daemon tailored for use with systemd. It avoids the dependency on ipsec starter and uses swanctl as configuration backend, building a simple and lightweight solution. It supports native systemd journal logging. * Support for IKEv2 fragmentation as per RFC 7383 has been added. Like IKEv1 fragmentation it can be enabled by setting fragmentation=yes in ipsec.conf. * Support of the TCG TNC IF-M Attribute Segmentation specification proposal. All attributes can be segmented. Additionally TCG/SWID Tag, TCG/SWID Tag ID and IETF/Installed Packages attributes can be processed incrementally on a per segment basis. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=85
2015-01-05 15:41:37 +01:00
%{strongswan_templates}/database/imv/tables-mysql.sql
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%{strongswan_templates}/database/sql/mysql.sql
%endif
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with sqlite}
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
%files sqlite
%defattr(-,root,root)
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%dir %{strongswan_libdir}
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
%dir %{strongswan_plugins}
%{strongswan_plugins}/libstrongswan-sqlite.so
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%dir %{strongswan_configs}
%dir %{strongswan_configs}/charon
%config(noreplace) %attr(600,root,root) %{strongswan_configs}/charon/sqlite.conf
%dir %{strongswan_datadir}
%dir %{strongswan_templates}
%dir %{strongswan_templates}/config
%dir %{strongswan_templates}/config/plugins
%dir %{strongswan_templates}/database
%dir %{strongswan_templates}/database/sql
%{strongswan_templates}/config/plugins/sqlite.conf
%{strongswan_templates}/database/sql/sqlite.sql
%endif
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
- Updated to strongSwan 5.0.1 release. Changes digest: - Introduced the sending of the standard IETF Assessment Result PA-TNC attribute by all strongSwan Integrity Measurement Verifiers. - Extended PTS Attestation IMC/IMV pair to provide full evidence of the Linux IMA measurement process. All pertinent file information of a Linux OS can be collected and stored in an SQL database. - The PA-TNC and PB-TNC protocols can now process huge data payloads. - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated clients against any PAM service. - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity Extensions. - The kernel-netlink plugin supports the new strongswan.conf option charon.install_virtual_ip_on. - Job handling in controller_t was fixed, which occasionally caused crashes on ipsec up/down. - Fixed transmission EAP-MSCHAPv2 user name if it contains a domain part. Changes digest from strongSwan 5.0.0 version: * The charon IKE daemon gained experimental support for the IKEv1 protocol. Pluto has been removed from the 5.x series. * The NetworkManager charon plugin of previous releases is now provided by a separate executable (charon-nm) and it should work again with NM 0.9. * scepclient was updated and it now works fine with Windows Server 2008 R2. For full list of the changes, please read the NEWS file shipped in the strongswan-doc package or online: http://wiki.strongswan.org/projects/strongswan/wiki/Changelog50 - Adopted spec file, enabled several plugins. - Changed to install strongswan.service with alias to ipsec.service OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=51
2012-10-31 17:08:08 +01:00
%if %{with tests}
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
%files tests
%defattr(-,root,root)
%dir %{strongswan_configs}
%dir %{strongswan_configs}/charon
%{strongswan_configs}/charon/load-tester.conf
%{strongswan_configs}/charon/test-vectors.conf
%dir %{strongswan_templates}
%dir %{strongswan_templates}/config
%dir %{strongswan_templates}/config/plugins
%{strongswan_templates}/config/plugins/load-tester.conf
%{strongswan_templates}/config/plugins/test-vectors.conf
%dir %{_libexecdir}/ipsec
%{_libexecdir}/ipsec/conftest
%{_libexecdir}/ipsec/load-tester
- Updated to strongSwan 5.1.2 providing the following changes: - A new default configuration file layout is introduced. The new default strongswan.conf file mainly includes config snippets from the strongswan.d and strongswan.d/charon directories (the latter containing snippets for all plugins). The snippets, with commented defaults, are automatically generated and installed, if they don't exist yet. Also installed in $prefix/share/strongswan/templates so existing files can be compared to the current defaults. - As an alternative to the non-extensible charon.load setting, the plugins to load in charon (and optionally other applications) can now be determined via the charon.plugins.<name>.load setting for each plugin (enabled in the new default strongswan.conf file via the charon.load_modular option). The load setting optionally takes a numeric priority value that allows reordering the plugins (otherwise the default plugin order is preserved). - All strongswan.conf settings that were formerly defined in library specific "global" sections are now application specific (e.g. settings for plugins in libstrongswan.plugins can now be set only for charon in charon.plugins). The old options are still supported, which now allows to define defaults for all applications in the libstrongswan section. - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum computer IKE key exchange mechanism. The implementation is based on the ntru-crypto library from the NTRUOpenSourceProject. The supported security strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be sent in order to use NTRU (charon.send_vendor_id = yes). - Defined a TPMRA remote attestation workitem and added support for it to the Attestation IMV. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=64
2014-04-14 09:44:26 +02:00
%dir %{strongswan_libdir}
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
%dir %{strongswan_plugins}
%{strongswan_plugins}/libstrongswan-load-tester.so
%{strongswan_plugins}/libstrongswan-test-vectors.so
%endif
- Updated to strongSwan 4.4.1 release, changes since 4.4.0 are: * Support of xfrm marks in IPsec SAs and IPsec policies introduced with the Linux 2.6.34 kernel. For details see the example scenarios ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp. * The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used in a user-specific updown script to set marks on inbound ESP or ESP_IN_UDP packets. * The openssl plugin now supports X.509 certificate and CRL functions. * OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled by default. Plase update manual load directives in strongswan.conf. * RFC3779 ipAddrBlock constraint checking has been moved to the addrblock plugin, disabled by default. Enable it and update manual load directives in strongswan.conf, if required. * The pki utility supports CRL generation using the --signcrl command. * The ipsec pki --self, --issue and --req commands now support output in PEM format using the --outform pem option. * The major refactoring of the IKEv1 Mode Config functionality now allows the transport and handling of any Mode Config attribute. * The RADIUS proxy plugin eap-radius now supports multiple servers. Configured servers are chosen randomly, with the option to prefer a specific server. Non-responding servers are degraded by the selection process. * The ipsec pool tool manages arbitrary configuration attributes stored in an SQL database. ipsec pool --help gives the details. * The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA, reading triplets/quintuplets from an SQL database. * The High Availability plugin now supports a HA enabled in-memory address pool and Node reintegration without IKE_SA rekeying. The latter allows clients without IKE_SA rekeying support to keep connected during reintegration. Additionally, many other issues have been fixed in the ha plugin. * Fixed a potential remote code execution vulnerability resulting from the misuse of snprintf(). The vulnerability is exploitable by unauthenticated users. - Removed obsolete snprintf security fix, adopted spec file - Enabled the eap-sim,eap-sim-file,eap-simaka-sql,eap-simaka-reauth, eap-simaka-pseudonym,eap-aka-3gpp2,md4,blowfish,addrblock plugins. - Enabled the mysql, sqlite, load-tester and test-vectors plugins, that are packaged into separate mysql,sqlite,tests sub packages. OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=18
2010-08-10 13:02:18 +02:00
%changelog