# # spec file for package strongswan (Version 4.2.6) # # Copyright (c) 2008 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. # Please submit bugfixes or comments via http://bugs.opensuse.org/ # # norootforbuild Name: strongswan %define upstream_version 4.2.6 %define strongswan_docdir %{_docdir}/%{name} Version: 4.2.6 Release: 1 License: GPL v2 or later Group: Productivity/Networking/Security Summary: StrongSwan -- OpenSource IPsec-based VPN Solution Url: http://www.strongswan.org/ PreReq: gmp grep %insserv_prereq %fillup_prereq Requires: iproute2 Provides: pluto klips ipsec VPN freeswan Obsoletes: freeswan Conflicts: openswan AutoReqProv: on Source0: http://download.strongswan.org/strongswan-%{upstream_version}.tar.bz2 Source1: http://download.strongswan.org/strongswan-%{upstream_version}.tar.bz2.sig Source2: %{name}.init.in Source3: %{name}-%{version}-rpmlintrc Patch1: %{name}_modprobe_syslog.dif Patch2: %{name}-%{upstream_version}.dif Patch3: %{name}_update-dns-server.dif BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildRequires: bison flex gmp-devel gperf pkg-config %if 0%{?suse_version} >= 1030 BuildRequires: libpcap-devel %else BuildRequires: libpcap %endif # --enable-http BuildRequires: curl-devel # --enable-ldap BuildRequires: openldap2-devel %description StrongSwan is an OpenSource IPsec-based VPN Solution for Linux * runs both on Linux 2.4 (KLIPS IPsec) and Linux 2.6 (NETKEY IPsec) kernels * implements both the IKEv1 and IKEv2 (RFC 4306) key exchange protocols * NEW: Fully tested support of IPv6 IPsec tunnel connections * Dynamical IP address and interface update with IKEv2 MOBIKE (RFC 4555) * Fast connection startup and periodic update using ipsec starter * Automatic insertion and deletion of IPsec policy based firewall rules * Strong 3DES, AES, Serpent, Twofish, or Blowfish encryption * NAT-Traversal via UDP encapsulation and port floating (RFC 3947) * Static Virtual IPs and IKE Mode Config Pull and Push modes * XAUTH server and client functionality on top of IKE Main Mode authentication * Dead Peer Detection (DPD, RFC 3706) takes care of dangling tunnels * Authentication based on X.509 certificates or preshared keys * Generation of a default self-signed certificate during first strongSwan startup * Retrieval and local caching of Certificate Revocation Lists via HTTP or LDAP * Full support of the Online Certificate Status Protocol (OCSP, RCF 2560). * CA management (OCSP and CRL URIs, default LDAP server) * Powerful IPsec policies based on wildcards or intermediate CAs * Group policies based on X.509 attribute certificates ( RFC 3281) * Optional storage of RSA private keys and certificates on a smartcard * Smartcard access via standardized PKCS #11 interface * PKCS #11 proxy function offering RSA decryption services via whack * NEW: strongSwan Manager - a graphical management interface for IKEv2 Authors: -------- Andreas Steffen and others %package doc License: GPL v2 or later Summary: StrongSwan -- OpenSource IPsec-based VPN Solution Group: Productivity/Networking/Security %description doc StrongSwan is an OpenSource IPsec-based VPN Solution for Linux This package provides the StrongSwan documentation. Authors: -------- Andreas Steffen and others %prep %setup -q -n %{name}-%{upstream_version} %patch1 -p0 %patch2 -p0 %patch3 -p0 sed -e 's|@libexecdir@|%_libexecdir|g' \ < $RPM_SOURCE_DIR/strongswan.init.in \ > strongswan.init %build export RPM_OPT_FLAGS="$RPM_OPT_FLAGS -W -Wall" export CFLAGS="$RPM_OPT_FLAGS" libtoolize --force %{?suse_update_config:%{suse_update_config -f}} autoreconf %configure \ --enable-smartcard --with-default-pkcs11=%{_libdir}/opensc-pkcs11.so \ --enable-cisco-quirks \ --enable-http \ --enable-ldap make %_smp_mflags %install export RPM_BUILD_ROOT install -m755 -d ${RPM_BUILD_ROOT}%{_sbindir}/ install -m755 -d ${RPM_BUILD_ROOT}%{_sysconfdir}/init.d/ install -m755 strongswan.init ${RPM_BUILD_ROOT}%{_sysconfdir}/init.d/ipsec ln -s %{_sysconfdir}/init.d/ipsec ${RPM_BUILD_ROOT}%{_sbindir}/rcipsec # make install DESTDIR="$RPM_BUILD_ROOT" # rm -f ${RPM_BUILD_ROOT}%{_sysconfdir}/ipsec.secrets cat << EOT > ${RPM_BUILD_ROOT}%{_sysconfdir}/ipsec.secrets # # ipsec.secrets # # This file holds the RSA private keys or the PSK preshared secrets for # the IKE/IPsec authentication. See the ipsec.secrets(5) manual page. # EOT # rm -f $RPM_BUILD_ROOT%{_libdir}/libstrongswan.{so,a,la} find $RPM_BUILD_ROOT%{_libdir}/ipsec \ -name "*.a" -o -name "*.la" | xargs -r rm -f # install -m755 -d ${RPM_BUILD_ROOT}%{strongswan_docdir}/ install -m644 TODO NEWS README COPYING CREDITS \ ${RPM_BUILD_ROOT}%{strongswan_docdir}/ %clean if [ -n "$RPM_BUILD_ROOT" ] && [ "$RPM_BUILD_ROOT" != "/" ] ; then rm -rf "$RPM_BUILD_ROOT" fi %post %{run_ldconfig} %{fillup_and_insserv ipsec} %preun %{stop_on_removal ipsec} if test -s %{_sysconfdir}/ipsec.secrets.rpmsave; then cp -p --backup=numbered %{_sysconfdir}/ipsec.secrets.rpmsave %{_sysconfdir}/ipsec.secrets.rpmsave.old fi if test -s %{_sysconfdir}/ipsec.conf.rpmsave; then cp -p --backup=numbered %{_sysconfdir}/ipsec.conf.rpmsave %{_sysconfdir}/ipsec.conf.rpmsave.old fi %postun %{run_ldconfig} %{restart_on_update ipsec} %{insserv_cleanup} %files %defattr(-,root,root) %config(noreplace) %attr(600,root,root) %{_sysconfdir}/ipsec.conf %config(noreplace) %attr(600,root,root) %{_sysconfdir}/ipsec.secrets %config(noreplace) %attr(600,root,root) %{_sysconfdir}/strongswan.conf %dir %{_sysconfdir}/ipsec.d %dir %{_sysconfdir}/ipsec.d/crls %dir %{_sysconfdir}/ipsec.d/reqs %dir %{_sysconfdir}/ipsec.d/certs %dir %{_sysconfdir}/ipsec.d/acerts %dir %{_sysconfdir}/ipsec.d/aacerts %dir %{_sysconfdir}/ipsec.d/cacerts %dir %{_sysconfdir}/ipsec.d/ocspcerts %dir %attr(700,root,root) %{_sysconfdir}/ipsec.d/private %config %{_sysconfdir}/init.d/ipsec %{_sbindir}/rcipsec %{_sbindir}/ipsec %{_libdir}/ipsec %{_libdir}/libstrongswan.* %if "%{_libdir}" != "%{_libexecdir}" %{_libexecdir}/ipsec %endif %{_mandir}/man5/ipsec.conf.5* %{_mandir}/man5/ipsec.secrets.5* %{_mandir}/man8/ipsec.8* %files doc %defattr(-,root,root) %dir %{strongswan_docdir} %{strongswan_docdir}/TODO %{strongswan_docdir}/NEWS %{strongswan_docdir}/README %{strongswan_docdir}/COPYING %{strongswan_docdir}/CREDITS %{_mandir}/man3/anyaddr.3* %{_mandir}/man3/atoaddr.3* %{_mandir}/man3/atoasr.3* %{_mandir}/man3/atosa.3* %{_mandir}/man3/atoul.3* %{_mandir}/man3/goodmask.3* %{_mandir}/man3/initaddr.3* %{_mandir}/man3/initsubnet.3* %{_mandir}/man3/keyblobtoid.3* %{_mandir}/man3/optionsfrom.3* %{_mandir}/man3/portof.3* %{_mandir}/man3/prng.3* %{_mandir}/man3/rangetosubnet.3* %{_mandir}/man3/sameaddr.3* %{_mandir}/man3/subnetof.3* %{_mandir}/man3/ttoaddr.3* %{_mandir}/man3/ttodata.3* %{_mandir}/man3/ttosa.3* %{_mandir}/man3/ttoul.3* %{_mandir}/man3/version.3* %{_mandir}/man8/_copyright.8* %{_mandir}/man8/_updown.8* %{_mandir}/man8/_updown_espmark.8* %{_mandir}/man8/openac.8* %{_mandir}/man8/pluto.8* %{_mandir}/man8/scepclient.8* %{_mandir}/man8/starter.8* %changelog * Thu Aug 28 2008 mt@suse.de - Updated to 4.2.6 release, fixing bugs and offering a lot of new features comparing to the last version provided by this package. Most important are: * A NetworkManager plugin allows GUI-based configuration of road-warrior clients in a simple way. It features X509 based gateway authentication and EAP client authentication, tunnel setup/teardown and storing passwords in the Gnome Keyring. * A new EAP-GTC plugin implements draft-sheffer-ikev2-gtc-00.txt and allows username/password authentication against any PAM service on the gateway. The new EAP method interacts nicely with the NetworkManager plugin and allows client authentication against e.g. LDAP. * Improved support for the EAP-Identity method. The new ipsec.conf eap_identity parameter defines an additional identity to pass to the server in EAP authentication. * Fixed two multithreading deadlocks occurring when starting up several hundred tunnels concurrently. * Fixed the --enable-integrity-test configure option which computes a SHA-1 checksum over the libstrongswan library. * Consistent logging of IKE and CHILD SAs at the audit (AUD) level. * Improved the performance of the SQL-based virtual IP address pool by introducing an additional addresses table. The leases table storing only history information has become optional and can be disabled by setting charon.plugins.sql.lease_history = no in strongswan.conf. * The XFRM_STATE_AF_UNSPEC flag added to xfrm.h allows IPv4-over-IPv6 and IPv6-over-IPv4 tunnels with the 2.6.26 and later Linux kernels. * management of different virtual IP pools for different network interfaces have become possible. * fixed a bug which prevented the assignment of more than 256 virtual IP addresses from a pool managed by an sql database. * fixed a bug which did not delete own IPCOMP SAs in the kernel. * The openssl plugin supports the elliptic curve Diffie-Hellman groups 19, 20, 21, 25, and 26 and ECDSA authentication using elliptic curve X.509 certificates. * Fixed a bug in stroke which caused multiple charon threads to close the file descriptors during packet transfers over the stroke socket. * ESP sequence numbers are now migrated in IPsec SA updates handled by MOBIKE. Works only with Linux kernels >= 2.6.17. * Fixed a number of minor bugs that where discovered during the 4th IKEv2 interoperability workshop in San Antonio, TX. * Plugins for libstrongswan and charon can optionally be loaded according to a configuration in strongswan.conf. Most components provide a "load = " option followed by a space separated list of plugins to load. This allows e.g. the fallback from a hardware crypto accelerator to to software-based crypto plugins. * Charons SQL plugin has been extended by a virtual IP address pool. Configurations with a rightsourceip=%%poolname setting query a SQLite or MySQL database for leases. The "ipsec pool" command helps in administrating the pool database. See ipsec pool --help for the available options * The Authenticated Encryption Algorithms AES-CCM-8/12/16 and AES-GCM-8/12/16 for ESP are now supported starting with the Linux 2.6.25 kernel. The syntax is e.g. esp=aes128ccm12 or esp=aes256gcm16. - Added patch disabling direct modifications of resolv.conf; has to be replaced by a netconfig call. - Added patch adding a missed file name argument in printf call in the scripts/thread_analysis.c file -- resulting binary is not installed. - Removed obsolete patches crash_badcfg_reload and old-caps-version. * Tue Jul 01 2008 mt@suse.de - Added fix that explicitly enables version 1 linux capabilities on version 2 systems to aviod that the charon and pluto daemons exit because of failed capset call (bnc#404989). * Mon May 19 2008 mt@suse.de - Applied fix (strongswan_crash_badcfg_reload.dif) to avoid a crash after reloading with bad config (bnc#392062). * Wed Apr 23 2008 mt@suse.de - Updated to 4.2.1 release. A lot of code refactoring in the 4.2 release provides much more modularity and therefore much more extensiblity and offers the following new features: * libstrongswan has been modularized to attach crypto algorithms, credential implementations (secret and private keys, certificates) and http/ldap fetchers dynamically through plugins. * A relational database API that uses pluggable database providers was added to libstrongswan including plugins for MySQL and SQLite. * The IKEv2 keying charon daemon has become more extensible. Generic plugins can provide arbitrary interfaces to credential stores and connection management interfaces. Also any EAP method can be added. * The authentication and credential framework in charon has been heavily refactored to support modular credential providers, proper CERTREQ/CERT payload exchanges and extensible authorization rules. * Support for "Hash and URL" encoded certificate payloads has been implemented in the IKEv2 daemon charon. * The IKEv2 daemon charon now supports the "uniqueids" option to close multiple IKE_SAs with the same peer. * The crypto factory in libstrongswan additionally supports random number generators. Plugins may provide other sources of randomness. * Extended the credential framework by a caching option to allow plugins persistent caching of fetched credentials. * The new trust chain verification introduced in 4.2.0 has been parallelized. Threads fetching CRL or OCSP information no longer block other threads. * A new IKEv2 configuration attribute framework has been introduced allowing plugins to provide virtual IP addresses, and in the future, other configuration attribute services (e.g. DNS/WINS servers). * The stroke plugin has been extended to provide virtual IP addresses from a simple pool defined in ipsec.conf. * Fixed compilation on uClibc and a couple of other minor bugs. * The IKEv1 pluto daemon now supports the ESP encryption algorithm CAMELLIA with key lengths of 128, 192, and 256 bits, as well as the authentication algorithm AES_XCBC_MAC. - Applied a small patch defining _GNU_SOURCE for struct in6_pktinfo and adding inclusion of limits.h for PATH_MAX availability. - Added rpmlintrc file and a libtoolize call to the spec file. * Tue Feb 19 2008 mt@suse.de - Updated to 4.1.11 maintenance release, providing following fixes: * IKE rekeying in NAT situations did not inherit the NAT conditions to the rekeyed IKE_SA so that the UDP encapsulation was lost with the next CHILD_SA rekeying. * Wrong type definition of the next_payload variable in id_payload.c caused an INVALID_SYNTAX error on PowerPC platforms. * Implemented IKEv2 EAP-SIM server and client test modules that use triplets stored in a file. For details on the configuration see the scenario 'ikev2/rw-eap-sim-rsa'. - The 4.1.10 final version, declared upstream as "Fully tested support of IPv6 IPsec tunnel connections", fixes ordering error in oscp cache, IPv6 defaults of the nexthop parameter, adds support for new EAP modules [disabled in this build] and obsoletes our strongswan_path and strongswan_ipsec_script_msg patches. - Removed a sed call from init script. * Sat Dec 08 2007 mt@suse.de - Updated to 4.1.9 final, including all our patches. - Changed init script to use ipsec cmd using LSB codes now. - Added strongswan_path.dif setting a PATH in scripts (updown). - Added strongswan_ipsec_script_msg.dif for consistent look of ipsec script messages. - Added strongswan_modprobe_syslog.dif redirecting modprobe output to syslog. * Mon Nov 26 2007 mt@suse.de - Renamed charon plugins to avoid rpm conflicts with existing libraries (libstroke). Patch: strongswan-libconflicts.dif - Added init script. Template file: strongswan.init.in * Thu Nov 22 2007 mt@suse.de - Initial, unfinished package