# # spec file for package strongswan (Version 4.4.0) # # Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. # Please submit bugfixes or comments via http://bugs.opensuse.org/ # # norootforbuild Name: strongswan %define upstream_version 4.4.0 %define strongswan_docdir %{_docdir}/%{name} %define strongswan_plugins %{_libexecdir}/ipsec/plugins Version: 4.4.0 Release: 2 License: GPLv2+ Group: Productivity/Networking/Security Summary: OpenSource IPsec-based VPN Solution Url: http://www.strongswan.org/ Requires: strongswan-ikev1 = %{version} Requires: strongswan-ikev2 = %{version} Requires: strongswan-ipsec = %{version} AutoReqProv: on Source0: http://download.strongswan.org/strongswan-%{upstream_version}.tar.bz2 Source1: http://download.strongswan.org/strongswan-%{upstream_version}.tar.bz2.sig Source2: %{name}.init.in Source3: %{name}-%{version}-rpmlintrc Source4: README.SUSE Patch1: %{name}_modprobe_syslog.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildRequires: bison flex gmp-devel gperf pkg-config BuildRequires: libcap-devel BuildRequires: libopenssl-devel BuildRequires: libgcrypt-devel BuildRequires: openldap2-devel BuildRequires: curl-devel pam-devel %if 0%{suse_version} >= 1110 BuildRequires: libuuid-devel BuildRequires: NetworkManager-devel %endif %description StrongSwan is an OpenSource IPsec-based VPN Solution for Linux * runs both on Linux 2.4 (KLIPS IPsec) and Linux 2.6 (NETKEY IPsec) kernels * implements both the IKEv1 and IKEv2 (RFC 4306) key exchange protocols * Fully tested support of IPv6 IPsec tunnel and transport connections * Dynamical IP address and interface update with IKEv2 MOBIKE (RFC 4555) * Automatic insertion and deletion of IPsec-policy-based firewall rules * Strong 128/192/256 bit AES or Camellia encryption, 3DES support * NAT-Traversal via UDP encapsulation and port floating (RFC 3947) * Dead Peer Detection (DPD, RFC 3706) takes care of dangling tunnels * Static virtual IPs and IKEv1 ModeConfig pull and push modes * XAUTH server and client functionality on top of IKEv1 Main Mode authentication * Virtual IP address pool managed by IKE daemon or SQL database * Secure IKEv2 EAP user authentication (EAP-SIM, EAP-AKA, EAP-MSCHAPv2, etc.) * Optional relaying of EAP messages to AAA server via EAP-RADIUS plugin * Support of IKEv2 Multiple Authentication Exchanges (RFC 4739) * Authentication based on X.509 certificates or preshared keys * Generation of a default self-signed certificate during first strongSwan startup * Retrieval and local caching of Certificate Revocation Lists via HTTP or LDAP * Full support of the Online Certificate Status Protocol (OCSP, RCF 2560). * CA management (OCSP and CRL URIs, default LDAP server) * Powerful IPsec policies based on wildcards or intermediate CAs * Group policies based on X.509 attribute certificates (RFC 3281) * Storage of RSA private keys and certificates on a smartcard (PKCS #11 interface) * Modular plugins for crypto algorithms and relational database interfaces * Support of elliptic curve DH groups and ECDSA certificates (Suite B, RFC 4869) * Optional built-in integrity and crypto tests for plugins and libraries * Smooth Linux desktop integration via the strongSwan NetworkManager applet This package triggers the installation of both, IKEv1 and IKEv2 daemons. Authors: -------- Andreas Steffen and others %package doc License: GPLv2+ Summary: OpenSource IPsec-based VPN Solution Group: Productivity/Networking/Security %description doc StrongSwan is an OpenSource IPsec-based VPN Solution for Linux This package provides the StrongSwan documentation. Authors: -------- Andreas Steffen and others %package libs0 License: GPLv2+ Summary: OpenSource IPsec-based VPN Solution Group: Productivity/Networking/Security Conflicts: strongswan < %{version} %description libs0 StrongSwan is an OpenSource IPsec-based VPN Solution for Linux This package provides the strongswan library and plugins. %package ikev1 License: GPLv2+ Summary: OpenSource IPsec-based VPN Solution Group: Productivity/Networking/Security Requires: iproute2 Requires: strongswan-libs0 = %{version} Requires: strongswan-ipsec = %{version} Provides: strongswan-daemon = %{version} ikev1 Provides: pluto Conflicts: freeswan openswan strongswan < %{version} %description ikev1 StrongSwan is an OpenSource IPsec-based VPN Solution for Linux This package provides the pluto IKEv1 daemon. %package ikev2 License: GPLv2+ Summary: OpenSource IPsec-based VPN Solution Group: Productivity/Networking/Security Requires: iproute2 Requires: strongswan-libs0 = %{version} Requires: strongswan-daemon-starter = %{version} Provides: strongswan-daemon = %{version} ikev2 Conflicts: openswan strongswan < %{version} %description ikev2 StrongSwan is an OpenSource IPsec-based VPN Solution for Linux This package provides the charon IKEv2 daemon. %package ipsec License: GPLv2+ Summary: OpenSource IPsec-based VPN Solution Group: Productivity/Networking/Security PreReq: grep %insserv_prereq %fillup_prereq Requires: strongswan-libs0 = %{version} Requires: strongswan-daemon = %{version} #Recommends: strongswan-ikev1 = %{version} #Recommends: strongswan-ikev2 = %{version} Provides: strongswan-daemon-starter = %{version} Provides: strongswan = %{version} ipsec VPN Obsoletes: strongswan < %{version} Conflicts: freeswan openswan %description ipsec StrongSwan is an OpenSource IPsec-based VPN Solution for Linux This package provides the /etc/init.d/ipsec service script and allows to maintain both, IKEv1 and IKEv2 daemons, using /etc/ipsec.conf and /etc/ipsec.sectes files. %if 0%{suse_version} >= 1110 %package nm License: GPLv2+ Summary: OpenSource IPsec-based VPN Solution Group: Productivity/Networking/Security Requires: strongswan-libs0 = %{version} Requires: strongswan-ikev2 = %{version} Provides: strongswan-daemon-starter = %{version} %description nm StrongSwan is an OpenSource IPsec-based VPN Solution for Linux This package provides the NetworkManager plugin to control the charon IKEv2 daemon through D-Bus, designed to work using the NetworkManager-strongswan graphical user interface. %endif %prep %setup -q -n %{name}-%{upstream_version} %patch1 -p0 sed -e 's|@libexecdir@|%_libexecdir|g' \ < $RPM_SOURCE_DIR/strongswan.init.in \ > strongswan.init %build CFLAGS="$RPM_OPT_FLAGS -W -Wall -Wno-pointer-sign -Wno-strict-aliasing" export RPM_OPT_FLAGS CFLAGS #libtoolize --force %{?suse_update_config:%{suse_update_config -f}} #autoreconf %configure \ --enable-integrity-test \ --with-capabilities=libcap \ --with-plugindir=%{strongswan_plugins} \ --with-resolv-conf=%{_localstatedir}/run/strongswan/resolv.conf \ --enable-smartcard \ --with-default-pkcs11=%{_libdir}/opensc-pkcs11.so \ --enable-cisco-quirks \ --enable-openssl \ --enable-agent \ --enable-eap-md5 \ --enable-eap-gtc \ --enable-eap-aka \ --enable-eap-radius \ --enable-eap-identity \ --enable-eap-mschapv2 \ --enable-ha \ --enable-dhcp \ --enable-farp \ --enable-sql \ --enable-attr-sql \ --enable-socket-dynamic \ %if 0%{suse_version} >= 1110 --enable-gcrypt \ --enable-nm \ %endif --enable-ldap \ --enable-curl make %{?_smp_mflags:%_smp_mflags} %install export RPM_BUILD_ROOT install -m755 -d ${RPM_BUILD_ROOT}%{_sbindir}/ install -m755 -d ${RPM_BUILD_ROOT}%{_sysconfdir}/ipsec.d/ install -m755 -d ${RPM_BUILD_ROOT}%{_sysconfdir}/init.d/ install -m755 strongswan.init ${RPM_BUILD_ROOT}%{_sysconfdir}/init.d/ipsec ln -s %{_sysconfdir}/init.d/ipsec ${RPM_BUILD_ROOT}%{_sbindir}/rcipsec # make install DESTDIR="$RPM_BUILD_ROOT" # rm -f ${RPM_BUILD_ROOT}%{_sysconfdir}/ipsec.secrets cat << EOT > ${RPM_BUILD_ROOT}%{_sysconfdir}/ipsec.secrets # # ipsec.secrets # # This file holds the RSA private keys or the PSK preshared secrets for # the IKE/IPsec authentication. See the ipsec.secrets(5) manual page. # EOT # rm -f $RPM_BUILD_ROOT%{_libdir}/lib*.{so,a,la} find $RPM_BUILD_ROOT%{_libexecdir}/ipsec \ -name "*.a" -o -name "*.la" | xargs -r rm -f # install -m755 -d ${RPM_BUILD_ROOT}%{strongswan_docdir}/ install -m644 TODO NEWS README COPYING CREDITS \ ${RPM_SOURCE_DIR}/README.SUSE \ ${RPM_BUILD_ROOT}%{strongswan_docdir}/ install -m755 -d $RPM_BUILD_ROOT%{_localstatedir}/run/strongswan %post libs0 %{run_ldconfig} test -d %{_localstatedir}/run/strongswan || \ %{__mkdir_p} %{_localstatedir}/run/strongswan %postun libs0 %{run_ldconfig} %post ipsec %{fillup_and_insserv ipsec} %preun ipsec %{stop_on_removal ipsec} if test -s %{_sysconfdir}/ipsec.secrets.rpmsave; then cp -p --backup=numbered %{_sysconfdir}/ipsec.secrets.rpmsave %{_sysconfdir}/ipsec.secrets.rpmsave.old fi if test -s %{_sysconfdir}/ipsec.conf.rpmsave; then cp -p --backup=numbered %{_sysconfdir}/ipsec.conf.rpmsave %{_sysconfdir}/ipsec.conf.rpmsave.old fi %postun ipsec %{insserv_cleanup} %files %defattr(-,root,root) %dir %{strongswan_docdir} %{strongswan_docdir}/README.SUSE %files ipsec %defattr(-,root,root) %config(noreplace) %attr(600,root,root) %{_sysconfdir}/ipsec.conf %config(noreplace) %attr(600,root,root) %{_sysconfdir}/ipsec.secrets %dir %{_sysconfdir}/ipsec.d %dir %{_sysconfdir}/ipsec.d/crls %dir %{_sysconfdir}/ipsec.d/reqs %dir %{_sysconfdir}/ipsec.d/certs %dir %{_sysconfdir}/ipsec.d/acerts %dir %{_sysconfdir}/ipsec.d/aacerts %dir %{_sysconfdir}/ipsec.d/cacerts %dir %{_sysconfdir}/ipsec.d/ocspcerts %dir %attr(700,root,root) %{_sysconfdir}/ipsec.d/private %config %{_sysconfdir}/init.d/ipsec %{_sbindir}/rcipsec %{_sbindir}/ipsec %{_mandir}/man8/ipsec.8* %{_mandir}/man5/ipsec.conf.5* %{_mandir}/man5/ipsec.secrets.5* %dir %{_libexecdir}/ipsec %{_libexecdir}/ipsec/_updown %{_libexecdir}/ipsec/_updown_espmark %{_libexecdir}/ipsec/_copyright %{_libexecdir}/ipsec/pki %{_libexecdir}/ipsec/openac %{_libexecdir}/ipsec/scepclient %{_libexecdir}/ipsec/starter %{_libexecdir}/ipsec/stroke %dir %{strongswan_plugins} %{strongswan_plugins}/libstrongswan-stroke.so %{strongswan_plugins}/libstrongswan-updown.so %files ikev1 %defattr(-,root,root) %dir %{_libexecdir}/ipsec %{_libexecdir}/ipsec/whack %{_libexecdir}/ipsec/pluto %{_libexecdir}/ipsec/_pluto_adns %files ikev2 %defattr(-,root,root) %dir %{_libexecdir}/ipsec %{_libexecdir}/ipsec/charon #%dir %{strongswan_plugins} %if 0%{suse_version} >= 1110 %files nm %defattr(-,root,root) %dir %{_libexecdir}/ipsec %dir %{strongswan_plugins} %{strongswan_plugins}/libstrongswan-nm.so %endif %files doc %defattr(-,root,root) %dir %{strongswan_docdir} %{strongswan_docdir}/TODO %{strongswan_docdir}/NEWS %{strongswan_docdir}/README %{strongswan_docdir}/COPYING %{strongswan_docdir}/CREDITS %{_mandir}/man3/anyaddr.3* %{_mandir}/man3/atoaddr.3* %{_mandir}/man3/atoasr.3* %{_mandir}/man3/atosa.3* %{_mandir}/man3/atoul.3* %{_mandir}/man3/goodmask.3* %{_mandir}/man3/initaddr.3* %{_mandir}/man3/initsubnet.3* %{_mandir}/man3/keyblobtoid.3* %{_mandir}/man3/portof.3* %{_mandir}/man3/prng.3* %{_mandir}/man3/rangetosubnet.3* %{_mandir}/man3/sameaddr.3* %{_mandir}/man3/subnetof.3* %{_mandir}/man3/ttoaddr.3* %{_mandir}/man3/ttodata.3* %{_mandir}/man3/ttosa.3* %{_mandir}/man3/ttoul.3* %{_mandir}/man8/_copyright.8* %{_mandir}/man8/_updown.8* %{_mandir}/man8/_updown_espmark.8* %{_mandir}/man8/openac.8* %{_mandir}/man8/pluto.8* %{_mandir}/man8/scepclient.8* %{_mandir}/man8/starter.8* %files libs0 %defattr(-,root,root) %config(noreplace) %attr(600,root,root) %{_sysconfdir}/strongswan.conf %{_libdir}/libhydra.so.0 %{_libdir}/libhydra.so.0.0.0 %{_libdir}/libcharon.so.0 %{_libdir}/libcharon.so.0.0.0 %{_libdir}/libstrongswan.so.0 %{_libdir}/libstrongswan.so.0.0.0 %dir %{_libexecdir}/ipsec %dir %{_libexecdir}/ipsec/pool %{_libexecdir}/ipsec/libchecksum.so %dir %{strongswan_plugins} %{strongswan_plugins}/libstrongswan-aes.so %{strongswan_plugins}/libstrongswan-agent.so %{strongswan_plugins}/libstrongswan-attr.so %{strongswan_plugins}/libstrongswan-attr-sql.so %{strongswan_plugins}/libstrongswan-curl.so %{strongswan_plugins}/libstrongswan-des.so %{strongswan_plugins}/libstrongswan-dhcp.so %{strongswan_plugins}/libstrongswan-dnskey.so %{strongswan_plugins}/libstrongswan-eap-aka.so %{strongswan_plugins}/libstrongswan-eap-gtc.so %{strongswan_plugins}/libstrongswan-eap-identity.so %{strongswan_plugins}/libstrongswan-eap-md5.so %{strongswan_plugins}/libstrongswan-eap-mschapv2.so %{strongswan_plugins}/libstrongswan-eap-radius.so %{strongswan_plugins}/libstrongswan-farp.so %{strongswan_plugins}/libstrongswan-fips-prf.so %if 0%{suse_version} >= 1110 %{strongswan_plugins}/libstrongswan-gcrypt.so %endif %{strongswan_plugins}/libstrongswan-gmp.so %{strongswan_plugins}/libstrongswan-ha.so %{strongswan_plugins}/libstrongswan-hmac.so %{strongswan_plugins}/libstrongswan-kernel-netlink.so %{strongswan_plugins}/libstrongswan-ldap.so %{strongswan_plugins}/libstrongswan-md5.so %{strongswan_plugins}/libstrongswan-openssl.so %{strongswan_plugins}/libstrongswan-pem.so %{strongswan_plugins}/libstrongswan-pgp.so %{strongswan_plugins}/libstrongswan-pkcs1.so %{strongswan_plugins}/libstrongswan-pubkey.so %{strongswan_plugins}/libstrongswan-random.so %{strongswan_plugins}/libstrongswan-resolve.so %{strongswan_plugins}/libstrongswan-sha1.so %{strongswan_plugins}/libstrongswan-sha2.so %{strongswan_plugins}/libstrongswan-socket-dynamic.so %{strongswan_plugins}/libstrongswan-socket-raw.so %{strongswan_plugins}/libstrongswan-sql.so %{strongswan_plugins}/libstrongswan-x509.so %{strongswan_plugins}/libstrongswan-xcbc.so %dir %ghost %{_localstatedir}/run/strongswan %changelog