576c74f6fd
- version 0.75.0 - Moved 77-network.rules and 81-mount.rules to /lib/udev/rules.d as both contain static rules. - Fixed spec to use 0600 mode for ifcfg-lo, because of bnc 670871. - Send gratuitous arp when new SEND_GRATUITOUS_ARP variable is set to yes either in global network/config or in per-interface ifcfg file. Fixed to use CHECK_DUPLICATE_IP for ipv4 only (bnc#617373). - Enslave a slaves into a bond on hotplug "up" event (bnc#669361).
Marius Tomaschewski2011-03-15 17:45:01 +00:00
c66326b7ef
- fixed postinstall script to avoid, that (wireless) ifcfg files become world readable while installation because of a fillup run; changed to explicitly set 0600 permissions (bnc#670871).
Marius Tomaschewski2011-02-14 13:59:47 +00:00
a96d17bf8c
Autobuild autoformatter for 59079
Lars Vogdt
2011-01-25 09:33:39 +00:00
e66dfd60e4
Updating link to change in openSUSE:Factory/sysconfig revision 100.0
OBS User buildservice-autocommit
2011-01-25 09:33:39 +00:00
9b75848369
Accepting request 59079 from Base:System
Lars Vogdt
2011-01-25 09:33:32 +00:00
c27176a55b
- version 0.74.5 - netconfig: strip trailing dots from domains dns search list as added by the dhcp 4.x dhclient(6), to skip duplicates.
Marius Tomaschewski2011-01-25 09:09:49 +00:00
1b8c4137ef
- Use gawk directly as in our dependencies instead of just awk, that is a /etc/alternatives link, that may be broken in rare cases (bnc#664726). - Fixed typo in doc/ifcfg.5, IPv4 autoip, not IPv6
Marius Tomaschewski2011-01-18 10:12:18 +00:00
0a3141f6f8
Autobuild autoformatter for 57457
Berthold Gunreben
2011-01-10 09:37:07 +00:00
0ed41e7eae
Updating link to change in openSUSE:Factory/sysconfig revision 94.0
OBS User buildservice-autocommit
2011-01-10 09:37:07 +00:00
a1ab01bf69
- Fix for udevmountd to allow mounting of multipath devices. With this and the corresponding multipath-tools patch, iscsi mounting works as advertised, both multipathed and non-multipathed (bnc#630434). - Fixed ifup-bonding to fail and remove bond when there are no active slaves at the end and not on enslave failure (bnc#660774).
Marius Tomaschewski2011-01-07 10:38:29 +00:00
a9044c2ee5
Autobuild autoformatter for 57244
Berthold Gunreben
2011-01-07 08:15:35 +00:00
a3b91f69ca
Updating link to change in openSUSE:Factory/sysconfig revision 92.0
OBS User buildservice-autocommit
2011-01-07 08:15:35 +00:00
18190bd1dc
- version 0.74.3 - Use iBFT primary or PXE BOOTIF inteface as primary dhcp interface (sets the default route and hostname) and the "first up interface wins" selection used before as fallback, when there is explicit user configuration available. Updated the DHCLIENT_PRIMARY_DEVICE variable description, added it also to the global network/dhcp config file (bnc#653365). - Improved default vlan name scheme docs in ifcfg-vlan.5 man page. - Use startmode auto instead of onboot in ifcfg-lo (bnc#533818) - Dropped obsolete and confusing etc/modprobe.d/50-ipv6.conf file (bnc#632530, bnc#656916). - Fixed link_wait scriptname check and ping usage (bnc#644738); improved to allow the user to specify the steps.
Marius Tomaschewski2011-01-06 09:54:56 +00:00
199e2b2b52
- version 0.74.2 - Adopted to search tunctl in /sbin (bnc#650468) - Fixed check if ipv6 is enabled in ifup-dhcp (bnc#616765). - Fixed ifplugd-selectif script to use -1 as default carrier flag and initialize interface type when unset to correctly print wireless instead of cable messages (bnc#637183). - Require wpa_supplicant if a wpa_supplicant config is specified - Improved ifup-bridge port prio and cost handling. Allow to specify '-' in BRIDGE_PORTPRIORITIES or BRIDGE_PATHCOSTS lists to skip setting of the port prio or path cost for particular ports while setting it for others.
Marius Tomaschewski2010-11-11 13:44:55 +00:00
460e846662
Accepting request 48106 from Base:System
OBS User autobuild
2010-09-21 09:55:42 +00:00
fd9500ea35
Updating link to change in openSUSE:Factory/sysconfig revision 86.0
OBS User buildservice-autocommit
2010-09-21 09:55:42 +00:00
cca47fa936
Accepting request 48106 from Base:System
OBS User autobuild
2010-09-21 09:55:41 +00:00
8a29b89ee9
- Fixed init flags to not start network in runlevel 2 (bnc#638508).
Marius Tomaschewski2010-09-14 10:41:06 +00:00
d6d72fdba5
Accepting request 45760 from Base:System
OBS User autobuild
2010-08-24 15:37:16 +00:00
2a62e4ee9c
Accepting request 45760 from Base:System
OBS User autobuild
2010-08-24 15:37:16 +00:00
101c4f3b71
- version 0.74.1 - Fixed wireless hardware to wext/nl80211 WPA driver mapping. Changed to use -Dnl80211,wext by default for untested drivers to let the wpa_supplicant fallback to wext when nl80211 is not available. Adjusted info message about untested drivers and enabled untested driver handling also in case wpa_supplicant is not required but the user prefers to use it (bnc#623340, #623676,#624182,#625403,#631283). Thanks to all reporters, especially to Larry Finger and Vladimir Botka!
Marius Tomaschewski2010-08-18 13:09:45 +00:00
1dbb5168e8
Accepting request 44241 from Base:System
OBS User autobuild
2010-07-30 12:38:57 +00:00
f722994f5a
Updating link to change in openSUSE:Factory/sysconfig revision 84.0
OBS User buildservice-autocommit
2010-07-30 12:38:57 +00:00
86d7a901d3
Accepting request 44241 from Base:System
OBS User autobuild
2010-07-30 12:38:56 +00:00
10a2325476
- version 0.74.0 - Changed ifup-wireless to use wext wpa driver for the rt2870sta, ipw2200 and ipw2100 wlan adapter driver (bnc#623676,bnc#623340).
Marius Tomaschewski2010-07-20 11:09:27 +00:00
413903a3ae
Accepting request 42834 from Base:System
OBS User autobuild
2010-07-19 11:59:16 +00:00
f157a9bde8
Updating link to change in openSUSE:Factory/sysconfig revision 83.0
OBS User buildservice-autocommit
2010-07-19 11:59:16 +00:00
85e31cd9d3
- Fixed check whether ipv6 is enabled or not in /sbin/ifup-dhcp to avoid dhcpv6 client start in case the interface is configured to start both, dhcpv4 and dhcpv6 clients (bnc#616765).
Marius Tomaschewski2010-07-12 11:23:43 +00:00
a3f19d2ba8
Accepting request 41246 from Base:System
OBS User autobuild
2010-06-09 15:39:26 +00:00
2b863e064e
Accepting request 41246 from Base:System
OBS User autobuild
2010-06-09 15:39:25 +00:00
b4150ea39c
- version 0.73.7 - Added writing of name server addresses to /etc/resolv.conf in forwarder mode ("bind", "dnsmasq") as fallback for the moments, when the local forwarder process is stopped, e.g. during update (bnc#607511). Set NETCONFIG_DNS_FORWARDER_FALLBACK=no to revert. - Fixed ifup-bonding to not fail, when the bonding already exists (bnc#609809) or when bonding options are using numeric arguments instead of names (fixes also bnc#572367). - Added BONDING_SKIP_REMOVE_WORKAROUND variable allowing to skip bonding interface removal in ifdown as workaround for kernel modules not reacting correctly to UNREGISTER event (bnc#576355). - Updated USERCONTROL variable description (bnc#605853). - Removed obsolete (pre 10.3) migration hooks - Removed dbus from Required-Start in /etc/init.d/network, added earlysyslog to Should-Start
Marius Tomaschewski2010-06-08 09:18:01 +00:00
75517db89a
Accepting request 40636 from Base:System
OBS User autobuild
2010-05-25 16:44:35 +00:00
16fe4df3f0
Updating link to change in openSUSE:Factory/sysconfig revision 79.0
OBS User buildservice-autocommit
2010-05-25 16:44:35 +00:00
1a4f040a2a
Accepting request 40636 from Base:System
OBS User autobuild
2010-05-25 16:44:34 +00:00
6ee21103ee
- Use wext wpa driver for the broadcom wl hw driver (bnc#585802).
Marius Tomaschewski2010-05-25 14:25:48 +00:00
a035c30ef0
- Use wext wpa driver for the wl hardware driver (bnc#585802).
Marius Tomaschewski2010-05-25 14:04:56 +00:00
c6d7c12683
Accepting request 39647 from Base:System
OBS User autobuild
2010-05-07 14:19:45 +00:00
7c05497fd6
Updating link to change in openSUSE:Factory/sysconfig revision 78.0
OBS User buildservice-autocommit
2010-05-07 14:19:45 +00:00
1d85bbcd2e
Accepting request 39647 from Base:System
OBS User autobuild
2010-05-07 14:19:44 +00:00
e21641731d
- version 0.73.6 - Completed and enabled dhclient6 support.
Marius Tomaschewski2010-05-07 13:19:16 +00:00
2523d776ab
- version 0.73.5 - Added WIRELESS_WPA_DEBUG_OPTION option with default of -dddt used while wpa_supplicant start when DEBUG is set (yes or wireless). - Fixed ifup-wireless to use PREFER_WPA_SUPPLICANT=yes when unset as specified as default in ifcfg.template. - Switched to use the new nl80211 wpa_supplicant driver required to support WIRELESS_REGULATORY_DOMAIN by default in the ifup-wireless. Can be switched back using WIRELESS_WPA_DRIVER='wext' (bnc#585802). - Updated interface type detection checking new sysfs tun_flags for tap and the phy80211 link for mac80211 based wireless interfaces. - Use git commands when in git repository (show/create ChangeLog) - Documented xen routed network setup using sysconfig mechanizms in the README.virtualization.
Marius Tomaschewski2010-04-22 14:30:37 +00:00
503c052e94
Accepting request 37829 from home:vbotka:branches:Base:System
Marius Tomaschewski2010-04-19 11:52:51 +00:00
3fe9885a8c
Accepting request 36121 from Base:System
OBS User autobuild
2010-03-31 17:59:30 +00:00
847b34448c
Updating link to change in openSUSE:Factory/sysconfig revision 77.0
OBS User buildservice-autocommit
2010-03-31 17:59:30 +00:00
f00d64be58
Accepting request 36121 from Base:System
OBS User autobuild
2010-03-31 17:59:08 +00:00
2c835b22f9
Updating link to change in openSUSE:Factory/sysconfig revision 76.0
OBS User buildservice-autocommit
2010-03-18 15:31:05 +00:00
609d6cfe85
Accepting request 34701 from Base:System
OBS User autobuild
2010-03-16 11:09:35 +00:00
295ea4f226
Accepting request 34701 from Base:System
OBS User autobuild
2010-03-16 11:09:35 +00:00
5b5804235b
- version 0.73.4 - Removed the haldaemon Required-Start/Stop dependency from the /etc/init.d/network-remotefs script, NetworkManager dropped it. - Added reading of a temporary startmode in ifdown to skip stopping of the interface and avoid shutdown problems when multipathed iscsi device was mounted (bnc#581259). - Do not use own ipoib mode/umcast defaults in ifup-infiniband but honor the /etc/sysconfig/infiniband:SET_IPOIB_CM=yes/no setting and apply when explicitly requested only (bnc#579555). - Fixed ifup-dhcp to check the complete state mark also for dhclient, that reports it now too (bnc#585380,bnc#518219). - Fixed dhcpcd-hook to call ifup ... -o dhcp (if-up.d/ifservice scripts) when dhcpcd reports "complete" configuration instead in "up", so also the new hostname is already set (bnc#583800). - Fixed to apply (per interface) sysctl settings also in ifup, so changes to the configuration have an effect (bnc#494958). - Added scripts/link_wait disabled by default, that can be used via if-up.d to check whether an interface is ready to use or just wait some time in cause of devices that does not report the link state correctly (bnc#570935). - Fixed ifdown to stop dhcp, flush IPs and set down interfaces marked BOOTPROTO=none (slave/ports) or the dhcp clients, ... will stay active after a rcnetwork restart when an interface configured with dhcp gets reconfigured as a bridge port or a bonding slave. Fixed ifstatus to report accurate status codes, so rcnetwork does not show red errors for virtual interfaces with STARTMODE=off (bnc#581245,bnc#562030). - Fixed ifdown-dhcp to remove pid file that can't be cleaned up when the client has been killed with -KILL (e.g. nfsroot case) and fixed ifdown to not execute ifdown-dhcp twice (bnc#524675). - Changed to use expanded option lists for netconfig actions in usage text (bnc#569609). - Improved netconfig.8 DNS forwarder/static servers documentation and yast2 meta tags in network/config file to show the currently available settings (bnc#580361,bnc#580506). - Filter out loopback addresses from forwarder configs (dnsmasq, bind) in NETCONFIG_DNS_FORWARDER!=resolver mode, so they don't cause any loop and allow them in /etc/resolv.conf to make it possible to get the system running, when the glibc feature to use the name server on the local machine gets broken again or the user wants ipv4 only (bnc#580361,bnc#549447,bnc#441947). - Fixed ifdown-dhcp to release a dhcpv6 lease correctly when requested, added a separate DHCLIENT6_RELEASE_BEFORE_QUIT variable (bnc#524675). - Consider the bind mounted files scenario instead of symlinks to a writable location in all netconfig calls to create temporary files. - Applied patch by agruen@suse.de: When no temporary files can be created next to /etc/resolv.conf (like /etc/resolv.conf.XXXXXXX), create the temporary file in /tmp instead: the root filesystem may be read-only, and /etc/resolv.conf may be bind mounted to a writable location. Likewise for /etc/yp.conf.
Marius Tomaschewski2010-03-12 18:01:17 +00:00
24043b5ace
Accepting request 32878 from Base:System
OBS User autobuild
2010-02-18 16:15:00 +00:00
2208b24016
Updating link to change in openSUSE:Factory/sysconfig revision 74.0
OBS User buildservice-autocommit
2010-02-18 16:15:00 +00:00
06f7cfca0c
checked in (request 32878)
OBS User autobuild
2010-02-18 16:14:59 +00:00
6f6cbad6ef
Accepting request 32812 from home:kay_sievers:branches:Base:System
Stephan Kulow
2010-02-18 13:51:54 +00:00
d9a028d0f2
- Added route proto filter to ifstatus-route to evaluate only routes that may have been set by ifup-route and skip routes added e.g. by zebra to not to waste CPU for big zebra routing tables (bnc#572205). Thanks to Adrian Ban for initial patch!
Marius Tomaschewski2010-02-12 11:43:11 +00:00
3593ebe292
- Fixed ifup-802.1q script to correctly search for the interface name of a vlan id in case multiple interfaces are using same vlan id. Thanks to Adrian Ban for a correction! (bnc#572186)
Marius Tomaschewski2010-02-12 11:32:26 +00:00
59f27ef66f
Accepting request 29587 from Base:System
OBS User autobuild
2010-01-14 21:28:51 +00:00
03f948c362
Updating link to change in openSUSE:Factory/sysconfig revision 73.0
OBS User buildservice-autocommit
2010-01-14 21:28:51 +00:00
ff47ee3ac7
checked in (request 29587)
OBS User autobuild
2010-01-14 21:28:50 +00:00
6c3c57f8a9
Accepting request 29064 from Base:System
OBS User autobuild
2010-01-14 15:32:22 +00:00
bc69c45e14
- version 0.73.3 - Fixed netconfig module/action exit code propagation (bnc#568398) - Applied udevmountd udev rule patch by Ludwig Nussel: don't handle crypto devices, boot.crypto does that already (bnc#569942) - Fix to allow ifup $tap when it already exists, e.g. created by kvm (bnc#557864). - Synchronized ifup-dhcp and dhcpcd configuration steps to report status after dhcpcd really finished all its steps (bnc#518219). - Improved detection if a dhcp client is running, causing ifup-dhcp and the network script to report false failures, when the client forks at the moment of the check (bnc#562030 and others). - Fixed rc option handling in ifup-sysctl, show own name in debug - Documented the if-up.d/ndp-proxy and its config file in the ifndp-proxy.5, fixed to follow the sysconfig config file name conventions (fate#304415). - Added ifup-sysctl script applying per interface sysctl settings and documented it in the ifsysctl.5 man page (bnc#494958).
Marius Tomaschewski2010-01-14 15:04:02 +00:00
c7031c4f39
Accepting request 28166 from home:jengelh:branches:Base:System
Marcus Meissner2010-01-11 09:52:18 +00:00
300625d3cf
Accepting request 25570 from Base:System
OBS User autobuild
2009-12-08 11:15:31 +00:00
2bd270ca9c
Updating link to change in openSUSE:Factory/sysconfig revision 71.0
OBS User buildservice-autocommit
2009-12-08 11:15:31 +00:00
e10fa517e9
checked in
OBS User autobuild
2009-12-08 11:15:30 +00:00
Sascha Peilicke
Marcus Meissner
Ludwig Nussel
Marius Tomaschewski
Marcus Rueckert
Lars Vogdt
Berthold Gunreben
Stephan Kulow
Ruediger Oertel