syslinux/syslinux-3.31.diff

--- abort.inc
+++ abort.inc
@@ -21,6 +21,11 @@
 ; abort_check: let the user abort with <ESC> or <Ctrl-C>
 ;
 abort_check:
+%ifdef WITH_GFX
+		; don't
+		cmp byte [gfx_ok],0
+		jnz .ret1
+%endif
 		call pollchar
 		jz .ret1
 		pusha
--- add_crc
+++ add_crc
@@ -0,0 +1,57 @@
+#! /usr/bin/perl
+
+use integer;
+
+# for isolinux
+#
+# Ensure checksum over (first sector - 64 bytes) [internally: FirstSecSum]
+# is 0 by adjusting the variable csum_value.
+#
+# Though isolinux checks the integrity with a separate checksum after all
+# data has been loaded this does not help with BIOSes that don't get even
+# the first 2k right. Hence this additional check. :-(
+#
+
+$file = shift;
+$list = "$file";
+$list =~ s/\.bin$/.lst/;
+
+open F, $list;
+
+while(<F>) {
+  if(/^\s*\d+\s*(\S+)\s*0+\s*(\<\d+\>\s*)?csum_value\s*dd\s*0/) {
+    $ofs = hex $1;
+  }
+}
+close F;
+
+die "oops 1\n" unless $ofs && !($ofs & 3);
+
+# print "$ofs\n";
+
+open F, $file or die "$file: $!\n";
+
+$file_size = -s $file;
+
+sysread F, $buf, $file_size;
+
+close F;
+
+die "oops 1\n" if $file_size != length($buf);
+
+@x = unpack "V512", $buf;
+
+for ($sum = 0, $i = 16; $i < 512; $i++) {
+  $sum += $x[$i];
+}
+
+# printf "0x%08x\n", $sum;
+
+$ns = pack "V", -$sum;
+
+substr($buf, $ofs, 4) = $ns;
+
+open F, ">$file" or die "$file: $!\n";
+
+syswrite F, $buf;
+
--- com32/lib/Makefile
+++ com32/lib/Makefile
@@ -79,6 +79,7 @@
 
 tidy:
 	rm -f *.o .*.d */*.o */.*.d sys/vesa/alphatbl.c
+	rm -f sys/vesa/*.o sys/vesa/.*.d
 
 clean: tidy
 	rm -f *.a
--- com32/libutil/get_key.c
+++ com32/libutil/get_key.c
@@ -42,6 +42,10 @@
 #include <getkey.h>
 #include <libutil.h>
 
+#ifndef CLK_TCK
+# define CLK_TCK __sysconf(2)
+#endif
+
 struct keycode {
   int code;
   int seqlen;
--- com32/modules/cpuid.c
+++ com32/modules/cpuid.c
@@ -238,7 +238,7 @@
 
 static int smp_scan_config (unsigned long base, unsigned long length)
 {
-        unsigned long *bp = base;
+        unsigned long *bp = (unsigned long *) base;
         struct intel_mp_floating *mpf;
 
 //        printf("Scan SMP from %p for %ld bytes.\n", bp,length);
--- com32/samples/keytest.c
+++ com32/samples/keytest.c
@@ -25,6 +25,10 @@
 #include <consoles.h>		/* Provided by libutil */
 #include <getkey.h>
 
+#ifndef CLK_TCK
+# define CLK_TCK __sysconf(2)
+#endif
+
 static void cooked_keys(void)
 {
   int key;
--- conio.inc
+++ conio.inc
@@ -47,6 +47,13 @@
 ;               set by routine searchdir
 ;
 get_msg_file:
+%ifdef WITH_GFX
+		; don't load if graphics code is active
+		cmp byte [gfx_ok],0
+		jz .nogfx
+		ret
+.nogfx:
+%endif
 		push es
 		shl edx,16			; EDX <- DX:AX (length of file)
 		mov dx,ax
--- gfxboot.inc
+++ gfxboot.inc
@@ -0,0 +1,1369 @@
+		section .text
+
+load_gfx_msg	db 'Loading...', 0
+no_msg		db 0
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+; do a reboot
+;
+do_reboot:
+		call gfx_done
+		mov word [472h],1234h
+		push word 0ffffh
+		push word 0
+		retf
+		int 19h
+		jmp $
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+; wait for 'enter' key pressed
+;
+wait_for_key:
+		pusha
+wait_for_key_10:
+		mov ah,0
+		int 16h
+		cmp al,13
+		jnz wait_for_key_10
+		popa
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+; read gfx data
+get_gfx_file:
+		push si
+		mov si,load_gfx_msg
+		call cwritestr
+		pop si
+		mov word [gfx_mem_start_seg],first_free_seg
+		push ds
+		push 40h
+		pop ds
+		mov bx,[13h]			; mem size in kb
+		pop ds
+		shl bx,6
+		mov word [gfx_mem_end_seg],bx
+
+		call gfx_init			; Load and display file
+		cmp byte [gfx_ok],0
+		jz .done
+		mov si,crlf_msg
+		call cwritestr
+.done:
+		ret
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+; read from disk, ask for disk change, if necessary
+
+;       EAX - Linear sector number
+;       ES:BX   - Target buffer
+;       BP      - Sector count
+;
+;       (es:)bx gets updated
+
+%if IS_SYSLINUX
+
+; %define DEBUG_XXX
+
+getlinsec3:
+%ifdef DEBUG_XXX
+		mov si,txt0
+		call dump_params
+		call crlf
+%endif
+		mov cx,[DiskSize]
+		or cx,cx
+		jz getlinsec3_70		; unlimited
+
+		xor dx,dx
+		div cx
+		xchg ax,dx
+		movzx eax,ax
+
+		mov si,ax
+		add si,bp
+		sub si,cx
+		jbe getlinsec3_40
+		; split
+
+		sub bp,si
+		movzx ebp,bp
+		push ebp
+		push eax
+		push si
+		push dx
+		call getlinsec3_40
+		pop dx
+		pop bp
+		pop eax
+		pop esi
+		add eax,esi
+		movzx ebp,bp
+		inc dl
+
+getlinsec3_40:
+		push es
+		pushad
+		call disk_change
+		popad
+		pop es
+		jc kaboom
+getlinsec3_70:
+%ifdef DEBUG_XXX
+		mov si,txt1
+		call dump_params
+		mov si,txt3
+		call cwritestr
+		push ax
+		mov al,[CurrentDisk]
+		call writehex2
+		pop ax
+		call crlf
+		pushad
+		call getchar
+		popad
+%endif
+		xor edx,edx
+		call getlinsec.jmp
+		ret
+
+%ifdef DEBUG_XXX
+dump_params:
+		push eax
+		call cwritestr
+		mov ax,es
+		call writehex4
+		mov si,txt2
+		call cwritestr
+		mov ax,bx
+		call writehex4
+		mov si,txt3
+		call cwritestr
+		pop eax
+		push eax
+		call writehex8
+		mov si,txt3
+		call cwritestr
+		mov ax,bp
+		call writehex4
+		pop eax
+		ret
+
+txt0		db 'linsec3: ', 0
+txt1		db 'linsec:  ', 0
+txt2		db ':', 0
+txt3		db ', ', 0
+
+%include "writehex.inc"
+
+%endif
+
+
+; dl: new disk
+; return: CF = 1 -> error
+disk_change:
+		cmp dl,[CurrentDisk]
+		jz disk_change_90
+
+		mov [CurrentDisk],dl
+		movzx eax,dl
+		mov [gfx_user_info_0],eax
+		add dl,'1'
+		mov [boot_disk_msg0],dl
+		mov [boot_ndisk_msg0],dl
+
+disk_change_20:
+		cmp byte [gfx_ok],0
+		jz disk_change_40
+		mov al,3
+		xor di,di
+		xor si,si
+		call gfx_infobox
+
+		jmp disk_change_50
+disk_change_40:
+		mov si,clrln_msg
+		call cwritestr
+		mov si,boot_disk_msg
+		call cwritestr
+		call wait_for_key
+		mov si,clrln_msg
+		call cwritestr
+disk_change_50:
+		xor eax,eax
+		mov bp,1
+		push bx
+		xor edx,edx
+		call getlinsec.jmp
+		pop bx
+		mov eax,[es:bx+27h]
+		sub eax,[bsVolumeID]
+		movzx edx,byte [CurrentDisk]
+		cmp eax,edx
+		jz disk_change_90
+		mov [gfx_user_info_1],eax
+
+		cmp byte [gfx_ok],0
+		jz disk_change_70
+		mov al,4
+		xor di,di
+		xor si,si
+		call gfx_infobox
+
+		jmp disk_change_50
+disk_change_70:
+		mov si,clrln_msg
+		call cwritestr
+		mov si,boot_ndisk_msg
+		call cwritestr
+;		mov eax,[es:bx+27h]
+;		call writehex8
+		call wait_for_key
+		mov si,clrln_msg
+		call cwritestr
+
+		jmp disk_change_20
+disk_change_90:
+		ret
+
+
+bsVolumeID	equ bsHugeSectors+7
+
+boot_disk_msg	db 'Please insert boot disk '
+boot_disk_msg0	db '0; then press ENTER to continue.', 0
+boot_ndisk_msg	db 'This is not boot disk '
+boot_ndisk_msg0	db '0. Press ENTER to continue.', 0
+
+DiskSize	dw 0			; unlimited
+CurrentDisk	db 0			; current disk
+
+clrln_msg	db 0dh, '                                                            ', 0dh, 0
+
+
+cache_metadata:
+		cmp word [DiskSize],0
+		jz cache_md_90
+
+		mov eax,[FAT]
+		mov ecx,[bxFATsecs]
+cache_md_20:
+		push eax
+		push cx
+		call getcachesector
+		pop cx
+		pop eax
+		inc eax
+		loop cache_md_20
+
+		mov eax,[RootDir]
+cache_md_40:
+		push eax
+		call getcachesector
+		pop eax
+		call nextsector
+		jnc cache_md_40
+		
+cache_md_90:
+		ret
+
+
+%endif
+
+
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+; gfx stuff
+;
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+
+gfx_menu_seg		equ real_mode_seg
+
+; != 0 -> graphics active
+gfx_ok			db 0
+gfx_cwritestr_old	db 0c3h		; 'ret'
+gfx_cpio_swab		db 0
+gfx_cd_changed		db 0
+
+gfx_mem_start_seg	dw 0
+gfx_mem_end_seg		dw 0
+
+			align 4, db 0
+; the memory area we are working with
+gfx_mem			dd 0		; linear address
+
+gfx_save_area1		dd 0		; 64k
+gfx_save_area1_used	db 0		; != 0 if area1 is in use
+
+; interface to loadable gfx extension (seg:ofs values)
+gfx_bc_jt		dd 0
+
+gfx_bc_init		dd 0
+gfx_bc_done		dd 0
+gfx_bc_input		dd 0
+gfx_bc_menu_init	dd 0
+gfx_bc_infobox_init	dd 0
+gfx_bc_infobox_done	dd 0
+gfx_bc_progress_init	dd 0
+gfx_bc_progress_done	dd 0
+gfx_bc_progress_update	dd 0
+gfx_bc_progress_limit	dd 0
+gfx_bc_password_init	dd 0
+gfx_bc_password_done	dd 0
+
+; menu entry descriptor
+menu_entries		equ 0
+menu_default		equ 2		; seg:ofs
+menu_ent_list		equ 6		; seg:ofs
+menu_ent_size		equ 10
+menu_arg_list		equ 12		; seg:ofs
+menu_arg_size		equ 16
+sizeof_menu_desc	equ 18
+
+menu_desc		zb sizeof_menu_desc
+
+; system config data (52 bytes)
+gfx_sysconfig		equ $
+gfx_bootloader		db 1			;  0: boot loader type (0: lilo, 1: syslinux, 2: grub)
+gfx_sector_shift	db SECTOR_SHIFT		;  1: sector shift
+gfx_media_type		db 0			;  2: media type (0: disk, 1: floppy, 2: cdrom)
+gfx_failsafe		db 0			;  3: turn on failsafe mode (bitmask)
+						;     0: SHIFT pressed
+						;     1: skip gfxboot
+						;     2: skip monitor detection
+gfx_sysconfig_size	db gfx_sysconfig_end-gfx_sysconfig	;  4: size of sysconfig data
+gfx_boot_drive		db 0			;  5: BIOS boot drive
+gfx_callback		dw gfx_cb		;  6: offset to callback handler
+gfx_bootloader_seg	dw 0			;  8: code/data segment used by bootloader; must follow gfx_callback
+gfx_reserved_1		dw 0			; 10
+gfx_user_info_0		dd 0			; 12: data for info box
+gfx_user_info_1		dd 0			; 16: data for info box
+gfx_bios_mem_size	dd 0			; 20: BIOS memory size (in bytes)
+gfx_xmem_0		dw 0			; 24: extended mem area 0 (start:size in MB; 12:4 bits)
+gfx_xmem_1		dw 0			; 26: extended mem area 1
+gfx_xmem_2		dw 0			; 28: extended mem area 2
+gfx_xmem_3		dw 0			; 20: extended mem area 3
+gfx_file		dd 0			; 32: start of gfx file
+gfx_archive_start	dd 0			; 36: start of cpio archive
+gfx_archive_end		dd 0			; 40: end of cpio archive
+gfx_mem0_start		dd 0			; 44: low free memory start
+gfx_mem0_end		dd 0			; 48: low free memory end
+gfx_sysconfig_end	equ $
+
+gfx_slash		db '/', 0
+
+%macro		lin2segofs 3
+		push %1
+		call gfx_l2so
+		pop %3
+		pop %2
+%endmacro
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+; must not change registers!
+;
+gfx_get_sysconfig:
+		push ax
+%if IS_ISOLINUX
+		mov al,[DriveNo]
+%else
+		mov al,[DriveNumber]
+%endif
+		mov [gfx_boot_drive],al
+
+%if IS_ISOLINUX
+		mov ah,2
+%else
+		mov ah,0
+%endif
+		cmp al,80h	; floppy ?
+		jae gfx_get_sysconfig_20
+		mov ah,1
+gfx_get_sysconfig_20:
+
+		mov [gfx_media_type],ah
+
+		mov [gfx_bootloader_seg],cs
+
+		pop ax
+		ret
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+; Initialize graphics code. Load and display graphics data.
+;
+;  dx:ax	file length
+;  si		start cluster
+;
+;  return:	[gfx_ok] = 0/1
+;
+gfx_init:
+		push es
+
+		test byte [KbdFlags],3
+		jz gfx_init_10
+		mov byte [gfx_failsafe],1
+		call ask_user
+gfx_init_10:
+
+		test byte [gfx_failsafe],2
+		jnz gfx_init_80
+
+		call highmemsize
+
+		; setup extended memory areas
+		pusha
+		mov eax,[HighMemSize]
+		mov [gfx_bios_mem_size],eax
+		shr eax,20
+		cmp ax,16
+		jb gfx_init_40			; at least 16MB
+		mov word [gfx_xmem_0],81h	; 1MB at 8MB
+		mov word [gfx_xmem_1],0a1h	; 1MB at 10MB
+
+		mov dword [gfx_save_area1],7f0000h	; 8MB-64k
+gfx_init_40:
+		popa
+
+		cld
+
+		movzx ebx,word [gfx_mem_start_seg]
+		shl ebx,4
+		jz gfx_init_80
+
+		movzx ecx,word [gfx_mem_end_seg]
+		shl ecx,4
+		jz gfx_init_80
+
+		cmp ecx,ebx
+		jbe gfx_init_80
+
+		; define our memory area
+		; gfx_mem _must_ be 16-byte aligned
+		mov dword [gfx_mem],ebx
+		mov dword [gfx_mem0_start],ebx
+		mov dword [gfx_mem0_end],ecx
+
+		call gfx_read_file
+		cmp byte [gfx_ok],0
+		jz near gfx_init_90
+
+		call gfx_get_sysconfig
+
+		; align 4
+		mov eax,[gfx_mem0_start]
+		add eax,3
+		and eax,~3
+		mov [gfx_mem0_start],eax
+
+		; setup jump table
+		les bx,[gfx_bc_jt]
+
+		mov ax,[es:bx]
+		mov [gfx_bc_init],ax
+		mov [gfx_bc_init+2],es
+
+		mov ax,[es:bx+2]
+		mov [gfx_bc_done],ax
+		mov [gfx_bc_done+2],es
+
+		mov ax,[es:bx+4]
+		mov [gfx_bc_input],ax
+		mov [gfx_bc_input+2],es
+
+		mov ax,[es:bx+6]
+		mov [gfx_bc_menu_init],ax
+		mov [gfx_bc_menu_init+2],es
+
+		mov ax,[es:bx+8]
+		mov [gfx_bc_infobox_init],ax
+		mov [gfx_bc_infobox_init+2],es
+
+		mov ax,[es:bx+10]
+		mov [gfx_bc_infobox_done],ax
+		mov [gfx_bc_infobox_done+2],es
+
+		mov ax,[es:bx+12]
+		mov [gfx_bc_progress_init],ax
+		mov [gfx_bc_progress_init+2],es
+
+		mov ax,[es:bx+14]
+		mov [gfx_bc_progress_done],ax
+		mov [gfx_bc_progress_done+2],es
+
+		mov ax,[es:bx+16]
+		mov [gfx_bc_progress_update],ax
+		mov [gfx_bc_progress_update+2],es
+
+		mov ax,[es:bx+18]
+		mov [gfx_bc_progress_limit],ax
+		mov [gfx_bc_progress_limit+2],es
+
+		mov ax,[es:bx+20]
+		mov [gfx_bc_password_init],ax
+		mov [gfx_bc_password_init+2],es
+
+		mov ax,[es:bx+22]
+		mov [gfx_bc_password_done],ax
+		mov [gfx_bc_password_done+2],es
+
+		mov esi,cs
+		shl esi,4
+		add esi,gfx_sysconfig
+		call far [gfx_bc_init]
+		jc gfx_init_80
+
+		mov byte [gfx_ok],1
+
+		; turn off 'cwritestr'
+		mov al,[cwritestr]
+		cmp al,0c3h
+		jz gfx_init_90
+		mov [gfx_cwritestr_old],al
+		mov byte [cwritestr],0c3h
+
+		jmp gfx_init_90
+
+gfx_init_80:
+		mov byte [gfx_ok],0
+gfx_init_90:
+		pop es
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+; Back to text mode.
+;
+;  return:	[gfx_ok] = 0
+;
+gfx_done:
+		push ax
+		cmp byte [gfx_ok],0
+		jz gfx_done_90
+		call far [gfx_bc_done]
+		mov byte [gfx_ok],0
+
+		; reactivate 'cwritestr'
+		mov al,[gfx_cwritestr_old]
+		cmp al,0c3h
+		jz gfx_done_90
+		mov [cwritestr],al
+gfx_done_90:
+		pop ax
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+gfx_input:
+		cmp byte [gfx_ok],0
+		jz gfx_input_90
+		cmp byte [gfx_save_area1_used],0
+		jz gfx_input_10
+		; recover saved menu layout, gfxboot has references into it
+		pushad
+		mov esi,[gfx_save_area1]
+		mov edi,gfx_menu_seg << 4
+		mov ecx,10000h
+		call bcopy
+		popad
+gfx_input_10:
+		call far [gfx_bc_input]
+		jnc gfx_input_50
+		mov ax,1
+gfx_input_50:
+		cmp ax,1
+		jnz gfx_input_90
+		push ax
+		call gfx_done
+		pop ax
+gfx_input_90:
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+; es:di		string
+; return:
+;  cx		length
+gfx_strlen:
+		mov cx,-1
+		mov al,0
+		repnz scasb
+		not cx
+		dec cx
+		ret
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+gfx_setup_menu:
+		push es
+		cmp byte [gfx_ok],0
+		jz gfx_setup_menu_90
+
+		mov dword [menu_desc+menu_default],gfx_menu_seg << 16
+
+		push ds
+		pop es
+		mov si,default_cmd
+		mov di,trackbuf
+		call mangle_name
+		mov si,trackbuf
+		les di,[menu_desc+menu_default]
+		call unmangle_name
+		inc di
+
+		mov [menu_desc+menu_ent_list],di
+		mov [menu_desc+menu_ent_list+2],es
+		mov [menu_desc+menu_arg_list],di
+		mov [menu_desc+menu_arg_list+2],es
+
+		; first, count entries and find max kernel and append length
+
+		push ds
+		pop es
+
+		xor si,si
+		jmp gfx_setup_menu_20
+gfx_setup_menu_10:
+		push ds
+		push word vk_seg
+		pop ds
+		mov di,VKernelBuf
+		call rllunpack
+		pop ds
+
+		; count only non empty entries
+		cmp byte [es:VKernelBuf],0
+		jz gfx_setup_menu_20
+
+		inc word [menu_desc+menu_entries]
+
+		push si
+		mov si,VKernelBuf
+		mov di,KernelCName
+		push di
+		call unmangle_name
+		pop di
+		pop si
+
+		call gfx_strlen
+
+		cmp cx,[menu_desc+menu_ent_size]
+		jbe gfx_setup_menu_15
+		mov [menu_desc+menu_ent_size],cx
+gfx_setup_menu_15:
+		mov ax,[VKernelBuf+vk_appendlen]
+		cmp ax,[menu_desc+menu_arg_size]
+		jbe gfx_setup_menu_20
+		mov [menu_desc+menu_arg_size],ax
+
+gfx_setup_menu_20:
+		cmp si,[VKernelBytes]
+		jb gfx_setup_menu_10
+
+		inc word [menu_desc+menu_ent_size]
+		mov ax,[menu_desc+menu_ent_size]
+		inc ax
+		add [menu_desc+menu_arg_size],ax
+
+		; ...and again, but this time copy entries
+
+		mov word [menu_desc+menu_entries],0
+
+		xor si,si
+		jmp gfx_setup_menu_60
+gfx_setup_menu_30:
+		push ds
+		pop es
+		push ds
+		push word vk_seg
+		pop ds
+		mov di,VKernelBuf
+		call rllunpack
+		pop ds
+
+		; count only non empty entries
+		cmp byte [es:VKernelBuf],0
+		jz gfx_setup_menu_60
+
+		mov di,[menu_desc+menu_arg_list]
+		add di,[menu_desc+menu_arg_size]
+		jc gfx_setup_menu_60
+
+		inc word [menu_desc+menu_entries]
+
+		push si
+
+		mov si,VKernelBuf
+		mov di,KernelCName
+		push ds
+		pop es
+		push di
+		call unmangle_name
+		pop si
+		mov cx,[menu_desc+menu_ent_size]
+		les di,[menu_desc+menu_arg_list]
+
+		rep movsb
+
+		mov cx,[VKernelBuf+vk_appendlen]
+		mov si,VKernelBuf+vk_append
+		rep movsb
+		mov byte [es:di],0
+
+		pop si
+
+		mov ax,[menu_desc+menu_arg_size]
+		add [menu_desc+menu_arg_list],ax
+
+gfx_setup_menu_60:
+		cmp si,[VKernelBytes]
+		jb gfx_setup_menu_30
+
+		mov ax,[menu_desc+menu_ent_size]
+		mov bx,[menu_desc+menu_arg_size]
+		mov [menu_desc+menu_ent_size],bx
+		add ax,[menu_desc+menu_ent_list]
+		mov [menu_desc+menu_arg_list],ax
+
+		mov esi,ds
+		shl esi,4
+		add esi,menu_desc
+
+		call far [gfx_bc_menu_init]
+
+		; save menu structure, gfxboot uses references into it
+		mov edi,[gfx_save_area1]
+		or edi,edi
+		jz gfx_setup_menu_90
+		mov esi,gfx_menu_seg << 4
+		mov ecx,10000h
+		call bcopy
+		mov byte [gfx_save_area1_used],1
+
+gfx_setup_menu_90:
+		pop es
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+gfx_infobox:
+		pushad
+		cmp byte [gfx_ok],0
+		jz gfx_infobox_90
+		mov ecx,ds
+		shl ecx,4
+		movzx esi,si
+		movzx edi,di
+		or si,si
+		jz gfx_infobox_20
+		add esi,ecx
+gfx_infobox_20:
+		or di,di
+		jz gfx_infobox_30
+		add edi,ecx
+gfx_infobox_30:
+		call far [gfx_bc_infobox_init]
+		xor edi,edi
+		xor eax,eax
+		call far [gfx_bc_input]
+		call far [gfx_bc_infobox_done]
+gfx_infobox_90:
+		popad
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+gfx_progress_init:
+		pushad
+		cmp byte [gfx_ok],0
+		jz gfx_progress_init_90
+		call far [gfx_bc_progress_init]
+gfx_progress_init_90:
+		popad
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+gfx_progress_done:
+		pushad
+		cmp byte [gfx_ok],0
+		jz gfx_progress_done_90
+		call far [gfx_bc_progress_done]
+gfx_progress_done_90:
+		popad
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+gfx_progress_update:
+		pushad
+		cmp byte [gfx_ok],0
+		jz gfx_progress_update_90
+		movzx eax,cx
+		call far [gfx_bc_progress_update]
+gfx_progress_update_90:
+		popad
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+gfx_progress_limit:
+		pushad
+		cmp byte [gfx_ok],0
+		jz gfx_progress_limit_90
+		movzx eax,ax
+		movzx edx,dx
+		call far [gfx_bc_progress_limit]
+gfx_progress_limit_90:
+		popad
+		ret
+
+
+%if 0
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+gfx_password:
+		pushad
+		cmp byte [gfx_ok],0
+		stc
+		jz gfx_password_90
+		call far [gfx_bc_password_init]
+		mov edi,ds
+		shl edi,4
+		add edi,gfx_password_buf
+		mov ecx,32
+		xor eax,eax
+		call far [gfx_bc_input]
+		mov esi,ds
+		shl esi,4
+		add esi,gfx_password_buf
+		call far [gfx_bc_password_done]
+		jnc gfx_password_90
+		mov esi,ds
+		shl esi,4
+		add esi,gfx_msg_wrong_password
+		xor edi,edi
+		mov al,0
+		call far [gfx_bc_infobox_init]
+		xor edi,edi
+		xor eax,eax
+		call far [gfx_bc_input]
+		call far [gfx_bc_infobox_done]
+		stc
+gfx_password_90:
+                popad
+                ret
+%endif
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+; Read graphics data and store them at [gfx_mem].
+;
+;  dx:ax	file length
+;  si		start cluster
+;
+;  return:	[gfx_ok] = 0/1
+;
+gfx_read_file:
+		push es
+		mov byte [gfx_ok],0
+		mov edi,[gfx_mem]
+		push dx                         ; DX:AX = length of file
+                push ax
+		pop edx
+		mov [gfx_archive_end],edx
+		mov eax,[gfx_mem0_start]
+		lea eax,[eax+edx+0fh]		; add space for alignment
+		cmp eax,[gfx_mem0_end]		; max. length
+		ja near gfx_read_file_90
+		mov [gfx_mem0_start],eax
+
+gfx_read_file_10:
+		mov bx,trackbuf
+		mov cx,[BufSafe]
+		push edi
+		push edx
+		call getfssec
+		pop edx
+		pop edi
+		movzx ecx,word [BufSafeBytes]
+		cmp edx,ecx
+		jae gfx_read_file_20
+		mov ecx,edx
+gfx_read_file_20:
+		push ecx
+		push edi
+		push si				; Save current cluster
+		push es
+		mov si,trackbuf
+		push edi
+		call gfx_l2so
+		pop di
+		pop es
+		rep movsb
+		pop es
+		pop si
+		pop edi
+		pop ecx
+		add edi,ecx
+		sub edx,ecx
+		ja gfx_read_file_10
+
+		call find_file
+		or eax,eax
+		jz gfx_read_file_90
+		push edi
+		push eax
+		add eax,edi
+		call align_it
+		pop eax
+		pop edi
+		sub edi,[gfx_mem]
+		mov ecx,[gfx_archive_start]
+		add edi,ecx
+		mov [gfx_file],edi
+		add [gfx_archive_end],ecx
+		add eax,edi
+		shr eax,4
+		mov [gfx_bc_jt+2],ax
+
+		mov byte [gfx_ok],1
+
+gfx_read_file_90:
+		pop es
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+; locate graphics file
+;
+; return:	eax: code offset (0 -> no file found)
+; 		edi: gfx file start
+;
+find_file:
+		mov edi,[gfx_mem]
+		lin2segofs edi,es,bx
+		call magic_ok
+		or eax,eax
+		jnz find_file_90
+
+		; ok, maybe it's a cpio archive
+
+		; note: edi must be properly aligned (2)!
+
+find_file_20:
+		mov ecx,[gfx_mem0_start]
+		sub ecx,26 + 12			; min cpio header + gfx header
+		cmp edi,ecx
+		jae find_file_90
+
+		lin2segofs edi,es,bx
+		cmp word [es:bx],71c7h
+		jz find_file_30			; normal cpio record
+		cmp word [es:bx],0c771h		; maybe byte-swapped?
+		jnz find_file_90		; no cpio record
+		mov byte [gfx_cpio_swab],1
+
+find_file_30:
+		mov ax,[es:bx+20]		; file name size
+		call cpio_swab
+		movzx esi,ax
+
+		inc si
+		and si,~1			; align
+
+		mov eax,[es:bx+22]		; data size
+		call cpio_swab
+		rol eax,16			; get word order right
+		call cpio_swab
+		mov ecx,eax
+
+		inc ecx
+		and ecx,byte ~1			; align
+
+		add si,26			; skip header
+
+		add edi,esi
+		add bx,si
+		call magic_ok
+		or eax,eax
+		jnz find_file_90
+
+		add edi,ecx
+		jmp find_file_20
+
+find_file_90:
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+; byte-swap cpio data if appropriate
+;
+; ax:		word to swap
+;
+; return:	ax: swapped if [gfx_cpio_swab], otherwise same as input
+;
+cpio_swab:
+		cmp byte [gfx_cpio_swab],0
+		jz cpio_swab_90
+		xchg ah,al
+
+cpio_swab_90:
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+;  es:bx	file start
+;
+;  return:	eax:	offset to code entry
+;
+; Notes:
+;  - changes no regs except eax
+;
+magic_ok:
+		xor eax,eax
+		cmp dword [es:bx],0b2d97f00h	; header.magic_id
+		jnz magic_ok_90
+		cmp byte [es:bx+4],8		; header.version
+		jnz magic_ok_90
+		mov eax,[es:bx+8]
+magic_ok_90:
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+;  eax		address to be aligned
+;
+align_it:
+		push dword [gfx_mem]
+		pop dword [gfx_archive_start]
+		neg al
+		and eax,byte 0fh
+		jz align_it_90
+		add [gfx_archive_start],eax
+		mov esi,[gfx_mem]
+		mov ebx,[gfx_mem0_start]
+		sub ebx,esi
+		sub ebx,byte 0fh
+		add esi,ebx
+		dec esi
+
+		std
+
+align_it_30:
+		or ebx,ebx
+		jz align_it_60
+		mov ecx,ebx
+		cmp ebx,8000h
+		jb align_it_40
+		mov ecx,8000h
+align_it_40:
+		push esi
+		sub ebx,ecx
+		sub [esp],ecx
+		push esi
+		call gfx_l2so
+		pop si
+		add si,8000h
+		sub word [esp],(8000h >> 4)
+		pop es
+		mov di,si
+		add di,ax
+		es rep movsb
+		pop esi
+		jmp align_it_30
+align_it_60:
+
+		cld
+
+align_it_90:
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+; Ask user whether to continue.
+;
+; don't change regs
+;
+ask_user:
+		pushad
+
+		mov si,failsafe_msg_0
+		call cwritestr
+
+		mov dx,2
+		mov si,failsafe_msg_1
+		call ask_question
+
+		test byte [gfx_failsafe],2
+		jnz ask_user_90
+
+		mov dx,4
+		mov si,failsafe_msg_2
+		call ask_question
+
+ask_user_90:
+
+		popad
+		ret
+
+
+; si: text
+; dh: 'yes'-mask
+; dl: 'no'-mask
+ask_question:
+		push dx
+		call cwritestr
+		mov si,failsafe_msg_q
+		call cwritestr
+		pop dx
+
+ask_question_20:
+		push dx
+		mov ah,0
+		int 16h
+		pop dx
+
+		cmp al,13
+		jnz ask_question_30
+		mov al,'y'
+ask_question_30:
+		or al,20h		; force lower case
+
+		cmp al,'y'
+		jz ask_question_40
+		cmp al,'n'
+		jnz ask_question_20
+		or byte [gfx_failsafe],dl
+		jmp ask_question_50
+ask_question_40:
+		or byte [gfx_failsafe],dh
+ask_question_50:
+
+		mov si,failsafe_key
+		mov [si],al
+		call cwritestr
+
+		ret
+
+failsafe_msg_q	db ' (y/n)? y', 8, 0
+
+failsafe_msg_0	db 13, 10, 10, 10, 0
+failsafe_msg_1	db 'Load boot graphics', 0
+failsafe_msg_2	db 'Detect display size', 0
+
+failsafe_key	db 0, 13, 10, 0
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+; Convert 32bit linear address to seg:ofs.
+;
+;  dword [esp + 2]:	linear address
+;
+; return:
+;  dword [esp + 2]:	seg:ofs
+;
+; Notes:
+;  - changes no regs
+;
+gfx_l2so:
+		push eax
+		mov eax,[esp + 6]
+		shr eax,4
+		mov [esp + 8],ax
+		and word [esp + 6],byte 0fh
+		pop eax
+		ret
+
+
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;
+cb_table	dw cb_status
+		dw cb_fopen
+		dw cb_fread
+		dw cb_getcwd
+		dw cb_chdir
+		dw cb_readsector
+cb_len		equ ($-cb_table)/2
+
+f_handle	dw 0
+f_size		dd 0
+fname_buf	times 64 db 0
+fname_buf_len	equ $ - fname_buf
+
+
+gfx_cb:
+		push cs
+		pop ds
+
+		cmp al,cb_len
+		jae gfx_cb_80
+
+		movzx bx,al
+		add bx,bx
+		call word [bx+cb_table]
+		jmp gfx_cb_90
+
+gfx_cb_80:
+		mov al,0ffh
+gfx_cb_90:
+		retf
+
+
+; Return status info.
+;
+; return:
+;  edx		filename buffer (64 bytes)
+;
+cb_status:
+		mov edx,cs
+		shl edx,4
+		add edx,fname_buf
+
+		xor al,al
+		ret
+
+; Open file.
+;
+; return:
+;    al		0: ok, 1: file not found
+;   ecx		file length (al = 0)
+;
+cb_fopen:
+		mov si,fname_buf
+		mov di,VGAFileMBuf	; we just need some space
+		push ds
+		pop es
+		push di
+		call mangle_name
+		pop di
+		call searchdir
+		xchg ax,bx
+		mov al,1
+		jz cb_fopen_90
+		mov [f_handle],si
+		mov cx,dx
+		shl ecx,16
+		mov cx,bx
+		mov [f_size],ecx
+cb_fopen_80:
+		xor al,al
+cb_fopen_90:
+		ret
+
+
+; Read next chunk.
+;
+; return:
+;   edx		buffer address (linear)
+;   ecx		data length (< 64k)
+;
+cb_fread:
+		cmp dword [f_size],0
+		jz cb_fread_80
+		push cs
+		pop es
+		mov bx,trackbuf
+		mov cx,[BufSafe]
+		mov si,[f_handle]
+		call getfssec
+		mov [f_handle],si
+		mov ecx,[f_size]
+		movzx edx,word [BufSafeBytes]
+		cmp ecx,edx
+		jbe cb_fread_50
+		mov ecx,edx
+cb_fread_50:
+		sub [f_size],ecx
+		mov edx,cs
+		shl edx,4
+		add edx,trackbuf
+
+cb_fread_80:
+		xor al,al
+cb_fread_90:
+		ret
+
+
+; Return current working directory.
+;
+; return:
+;  edx		filename
+;
+cb_getcwd:
+		mov edx,cs
+		shl edx,4
+%if IS_ISOLINUX
+		add edx,isolinux_dir
+%else
+		add edx,gfx_slash
+%endif
+		xor al,al
+		ret
+
+
+; Set current working directory.
+;
+cb_chdir:
+%if IS_ISOLINUX
+
+		push cs
+		pop es
+		mov si,fname_buf
+		mov di,isolinux_dir
+cb_chdir_20:
+		lodsb
+		stosb
+		or al,al
+		jz cb_chdir_60
+		cmp di,isolinux_cfg - 1
+		jb cb_chdir_20
+		xor al,al
+		stosb
+cb_chdir_60:
+		call get_fs_structures
+
+%endif
+		xor al,al
+		ret
+
+
+; read sector
+;
+;  edx		sector
+;
+; return:
+;  edx		buffer (linear address)
+;
+;  Note: does not return on error!
+;
+cb_readsector:
+		mov eax,edx
+		push ds
+		pop es
+		mov bx,trackbuf
+		call getonesec
+		mov edx,ds
+		shl edx,4
+		add edx,trackbuf
+		xor al,al
+		ret
+
--- isolinux.asm
+++ isolinux.asm
@@ -19,6 +19,10 @@
 ; ****************************************************************************
 
 %define IS_ISOLINUX 1
+
+%define WITH_GFX 1
+; %define DEBUG_DISKIO
+
 %include "head.inc"
 
 ;
@@ -70,6 +74,7 @@
 vk_seg          equ 2000h		; Virtual kernels
 xfer_buf_seg	equ 1000h		; Bounce buffer for I/O to high mem
 comboot_seg	equ real_mode_seg	; COMBOOT image loading zone
+first_free_seg	equ 4000h		; end of isolinux used memory
 
 ;
 ; File structure.  This holds the information for each currently open file.
@@ -266,6 +271,21 @@
 		mov [FirstSecSum],edi
 
 		mov [DriveNo],dl
+
+		; check whether the BIOS did load us correctly
+		cmp dl,80h			; some BIOSes try to do floppy emulation...
+		jb bios_err
+		cmp dword [FirstSecSum], byte 0
+		jz bios_ok
+bios_err:
+		mov si,broken_bios_msg
+		call writemsg
+		jmp short $
+broken_bios_msg	db 13, 10, 'Cannot boot from this CD. Please use CD2 or try a BIOS update.', 13, 10, 0
+		align 4
+csum_value	dd 0
+bios_ok:
+
 %ifdef DEBUG_MESSAGES
 		mov si,startup_msg
 		call writemsg
@@ -290,6 +310,9 @@
 		; Other nonzero fields
 		inc word [dsp_sectors]
 
+%if 0
+		; Some BIOSes don't like that call.
+
 		; Now figure out what we're actually doing
 		; Note: use passed-in DL value rather than 7Fh because
 		; at least some BIOSes will get the wrong value otherwise
@@ -310,6 +333,8 @@
 		call crlf
 %endif
 
+%endif
+
 found_drive:
 		; Alright, we have found the drive.  Now, try to find the
 		; boot file itself.  If we have a boot info table, life is
@@ -434,6 +459,9 @@
 %endif
 		jmp all_read			; Jump to main code
 
+%if 0
+		; doesn't work anyway, see above
+
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 ;; Start of BrokenAwardHack --- 10-nov-2002           Knut_Petersen@t-online.de
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
@@ -617,6 +645,7 @@
 		mov si,trysbm_msg
 		call writemsg
 		jmp .found_drive		; Pray that this works...
+%endif
 
 fatal_error:
 		mov si,nothing_msg
@@ -676,10 +705,17 @@
 ;
 getlinsec:
 		mov si,dapa			; Load up the DAPA
+		mov [si+8],eax
+		; seems that some BIOSes have problems if the target
+		; segment is 0 (don't ask); to avoid this, we normalize
+		; the buffer address here
+		; -> seen on Acer TravelMate C102Ti
 		mov [si+4],bx
-		mov bx,es
-		mov [si+6],bx
-		mov [si+8],eax
+		and word [si+4],0fh
+		mov ax,es
+		shr bx,4
+		add ax,bx
+		mov [si+6],ax
 .loop:
 		push bp				; Sectors left
 		cmp bp,[MaxTransfer]
@@ -706,14 +742,77 @@
 		; INT 13h with retry
 xint13:		mov byte [RetryCount],retry_count
 .try:		pushad
+%ifdef DEBUG_DISKIO
+		pushad
+		mov cx,16
+.zap:
+		lodsb
+		call writehex2
+		mov al,' '
+		call writechr
+		loop .zap
+		mov ah,0
+		int 16h
+		popad
+%endif
+		; seen buggy bios that overwrites buffer address on error...
+		push dword [dapa + 4]
 		int 13h
+		pop dword [dapa + 4]
+%ifdef DEBUG_DISKIO   
+		pushad
+		pushf
+		push ax
+		mov al,':'
+		call writechr
+		mov al,' '
+		call writechr
+		pop ax
+		sbb al,al
+		call writehex4
+		call crlf
+		mov ah,0
+		int 16h
+		popf
+		popad
+%endif
 		jc .error
+.noerror:
 		add sp,byte 8*4			; Clean up stack
 		ret
 .error:
+		or ah,ah
+		jz .noerror
 		mov [DiskError],ah		; Save error code
 		popad
 		mov [DiskSys],ax		; Save system call number
+
+%if 0
+		; eject currently not supported - doesn't work anyway with
+		; most BIOSes
+
+		test byte [gfx_user_note],1
+		jz .noeject
+		cmp byte [RetryCount],4
+		ja .noeject
+		cmp byte [DiskError],0aah	; drive not ready
+		jnz .noeject
+		; might have been cdrom eject, wait a bit
+		cmp byte [gfx_ok],0
+		jz .noeject
+		push si
+		push di
+		push ax
+		mov si,err_not_ready
+		xor di,di
+		mov al,0
+		call gfx_infobox
+		pop ax
+		pop di
+		pop si
+%endif
+.noeject:
+
 		dec byte [RetryCount]
 		jz .real_error
 		push ax
@@ -756,6 +855,17 @@
 ;
 kaboom:
 		RESET_STACK_AND_SEGS AX
+
+		cmp byte [gfx_ok],0
+		jz .nogfx
+		mov si,err_failed_gfx
+		xor di,di
+		mov al,1
+		call gfx_infobox
+		call gfx_done
+		call do_reboot
+.nogfx:
+
 		mov si,err_bootfailed
 		call cwritestr
 		call getchar
@@ -807,6 +917,9 @@
 crlf_msg	db CR, LF
 null_msg	db 0
 
+err_failed_gfx	db 'Error reading boot CD.', 0
+err_not_ready	db 'CDROM drive not ready.', 0
+
 		alignb 4, db 0
 StackPtr	dw StackBuf, 0			; SS:SP for stack reset
 MaxTransfer	dw 32				; Max sectors per transfer
@@ -876,6 +989,9 @@
 ; (which will be at 16 only for a single-session disk!); from the PVD
 ; we should be able to find the rest of what we need to know.
 ;
+		call get_fs_structures
+		jmp get_fs_struct_done
+
 get_fs_structures:
 		mov eax,[bi_pvd]
 		mov bx,trackbuf
@@ -901,10 +1017,15 @@
 		; Look for an isolinux directory, and if found,
 		; make it the current directory instead of the root
 		; directory.
+
+		cmp byte [gfx_ok],0		; don't look at both
+		jnz .gfx
+
 		mov di,boot_dir			; Search for /boot/isolinux
 		mov al,02h
 		call searchdir_iso
 		jnz .found_dir
+.gfx:
 		mov di,isolinux_dir
 		mov al,02h			; Search for /isolinux
 		call searchdir_iso
@@ -925,7 +1046,10 @@
 		call crlf
 %endif
 .no_isolinux_dir:
+		ret
 
+get_fs_struct_done:
+
 ;
 ; Locate the configuration file
 ;
@@ -1103,6 +1227,9 @@
 ; 0xFFFF in case we should execute INT 18h ("next device.")
 ;
 local_boot:
+%ifdef WITH_GFX
+		call gfx_done
+%endif
 		call vgaclearmode
 		lss sp,[cs:Stack]		; Restore stack pointer
 		xor dx,dx
@@ -1120,7 +1247,7 @@
 		xor dh,dh
 		push dx
 		xor ax,ax			; Reset drive
-		call xint13
+		int 13h				; we don't care about errors here...
 		mov ax,0201h			; Read one sector
 		mov cx,0001h			; C/H/S = 0/0/1 (first sector)
 		mov bx,trackbuf
@@ -1486,6 +1613,9 @@
 %include "strcpy.inc"		; strcpy()
 %include "rawcon.inc"		; Console I/O w/o using the console functions
 
+%include "gfxboot.inc"		; add gfx things
+
+
 ; -----------------------------------------------------------------------------
 ;  Begin data section
 ; -----------------------------------------------------------------------------
@@ -1507,7 +1637,8 @@
 		db 'booting, and I will take your word for it.', CR, LF, 0
 err_badcfg      db 'Unknown keyword in config file.', CR, LF, 0
 err_noparm      db 'Missing parameter in config file.', CR, LF, 0
-err_noinitrd    db CR, LF, 'Could not find ramdisk image: ', 0
+err_noinitrd    db CR, LF
+err_noinitrda	db 'Could not find ramdisk image: ', 0
 err_nohighmem   db 'Not enough memory to load specified kernel.', CR, LF, 0
 err_highload    db CR, LF, 'Kernel transfer failure.', CR, LF, 0
 err_oldkernel   db 'Cannot load a ramdisk with an old kernel image.'
@@ -1532,6 +1663,7 @@
 default_len	equ ($-default_str)
 boot_dir	db '/boot'			; /boot/isolinux
 isolinux_dir	db '/isolinux', 0
+		zb 64
 ConfigName	equ $
 isolinux_cfg	db 'isolinux.cfg', 0
 err_disk_image	db 'Cannot load disk image (invalid file)?', CR, LF, 0
--- keywords
+++ keywords
@@ -32,3 +32,5 @@
 f10
 f11
 f12
+gfxboot
+disksize
--- keywords.inc
+++ keywords.inc
@@ -76,8 +76,15 @@
 %if IS_PXELINUX
 		keyword ipappend,  pc_ipappend
 %endif
-%if IS_PXELINUX || IS_ISOLINUX
+%if IS_PXELINUX || IS_ISOLINUX || IS_SYSLINUX
 		keyword localboot, pc_localboot
 %endif
 
+%ifdef WITH_GFX
+		keyword gfxboot,   pc_filecmd,  get_gfx_file
+%if IS_SYSLINUX
+		keyword disksize,  pc_disksize, DiskSize
+%endif
+%endif
+
 keywd_count	equ ($-keywd_table)/keywd_size
--- layout.inc
+++ layout.inc
@@ -26,7 +26,11 @@
 ; The secondary BSS section, above the text; we really wish we could
 ; just make it follow .bcopy32 or hang off the end,
 ; but it doesn't seem to work that way.
+%ifdef WITH_GFX
+LATEBSS_START	equ 0B800h
+%else
 LATEBSS_START	equ 0B400h
+%endif
 
 ; Reserve memory for the stack.  This causes checkov to abort the
 ; compile if we violate this space.
--- ldlinux.asm
+++ ldlinux.asm
@@ -24,6 +24,9 @@
 %ifndef IS_MDSLINUX
 %define IS_SYSLINUX 1
 %endif
+
+%define WITH_GFX 1
+
 %include "head.inc"
 
 ;
@@ -82,6 +85,7 @@
 vk_seg          equ 2000h		; Virtual kernels
 xfer_buf_seg	equ 1000h		; Bounce buffer for I/O to high mem
 comboot_seg	equ real_mode_seg	; COMBOOT image loading zone
+first_free_seg	equ 5000h		; end of syslinux used memory
 
 ;
 ; File structure.  This holds the information for each currently open file.
@@ -368,6 +372,8 @@
 		add eax,[bsHidden]		; Add partition offset
 		xor edx,edx			; Zero-extend LBA (eventually allow 64 bits)
 
+.patch:		jmp strict near .jmp
+
 .jmp:		jmp strict short getlinsec_cbios
 
 ;
@@ -927,6 +933,50 @@
 %include "bootsect.inc"
 
 ;
+; Boot a specified local disk.  AX specifies the BIOS disk number; or
+; 0xFFFF in case we should execute INT 18h ("next device.")
+;
+local_boot:
+%ifdef WITH_GFX
+		call gfx_done
+%endif
+		call vgaclearmode
+		lss sp,[cs:Stack]		; Restore stack pointer
+		xor dx,dx
+		mov ds,dx
+		mov es,dx
+		mov fs,dx
+		mov gs,dx
+		mov si,localboot_msg
+		call cwritestr
+		cmp ax,-1
+		je .int18
+
+		; Load boot sector from the specified BIOS device and jump to it.
+		mov dl,al
+		xor dh,dh
+		push dx
+		xor ax,ax			; Reset drive
+		int 13h
+		mov ax,0201h			; Read one sector
+		mov cx,0001h			; C/H/S = 0/0/1 (first sector)
+		mov bx,trackbuf
+		int 13h
+		pop dx
+		cli				; Abandon hope, ye who enter here
+		mov si,trackbuf
+		mov di,07C00h
+		mov cx,512			; Probably overkill, but should be safe
+		rep movsd
+		mov ss,cx
+		mov sp,7c00h
+		jmp 0:07C00h			; Jump to new boot sector
+
+.int18:
+		int 18h				; Hope this does the right thing...
+		jmp kaboom			; If we returned, oh boy...
+
+;
 ; Abort loading code
 ;
 %include "abort.inc"
@@ -1048,6 +1098,15 @@
 ;	   starting with "kaboom.patch" with this part
 
 kaboom2:
+		cmp byte [gfx_ok],0
+		jz .nogfx
+		mov si,err_failed_gfx
+		xor di,di
+		mov al,1
+		call gfx_infobox
+		call gfx_done
+		call do_reboot
+.nogfx:
 		mov si,err_bootfailed
 		call cwritestr
 		call getchar
@@ -1418,6 +1477,8 @@
 %include "strcpy.inc"           ; strcpy()
 %include "cache.inc"		; Metadata disk cache
 
+%include "gfxboot.inc"		; add gfx things
+
 ; -----------------------------------------------------------------------------
 ;  Begin data section
 ; -----------------------------------------------------------------------------
@@ -1450,7 +1511,8 @@
 		db 'booting, and I will take your word for it.', CR, LF, 0
 err_badcfg      db 'Unknown keyword in syslinux.cfg.', CR, LF, 0
 err_noparm      db 'Missing parameter in syslinux.cfg.', CR, LF, 0
-err_noinitrd    db CR, LF, 'Could not find ramdisk image: ', 0
+err_noinitrd    db CR, LF
+err_noinitrda   db 'Could not find ramdisk image: ', 0
 err_nohighmem   db 'Not enough memory to load specified kernel.', CR, LF, 0
 err_highload    db CR, LF, 'Kernel transfer failure.', CR, LF, 0
 err_oldkernel   db 'Cannot load a ramdisk with an old kernel image.'
@@ -1460,7 +1522,9 @@
 err_a20		db CR, LF, 'A20 gate not responding!', CR, LF, 0
 err_bootfailed	db CR, LF, 'Boot failed: please change disks and press '
 		db 'a key to continue.', CR, LF, 0
+err_failed_gfx	db 'Error reading from disk.', 0
 ready_msg	db 'Ready.', CR, LF, 0
+localboot_msg	db 'Booting from local disk...', CR, LF, 0
 crlfloading_msg	db CR, LF
 loading_msg     db 'Loading ', 0
 dotdot_msg      db '.'
--- loadhigh.inc
+++ loadhigh.inc
@@ -47,7 +47,12 @@
 .read_loop:
 		and si,si			; If SI == 0 then we have end of file
 		jz .eof
+%ifdef WITH_GFX
+		cmp byte [gfx_ok],0
+		jnz .no_message
+%endif
 		call bx
+.no_message:
 		push bx				; <AA> Pausebird function
 
 		push eax			; <A> Total bytes to transfer
@@ -63,7 +68,15 @@
 		push edi			; <C> Target buffer
 		mov cx,ax
 		xor bx,bx			; ES:0
+
+%ifdef WITH_GFX
+		call gfx_progress_update
+%endif
+
+		push dx
 		call getfssec			; Load the data into xfer_buf_seg
+						; getfssec destroys dx!
+		pop dx
 		pop edi				; <C> Target buffer
 		pop ecx				; <B> Byte count this round
 		push ecx			; <B> Byte count this round
--- Makefile
+++ Makefile
@@ -121,7 +121,7 @@
 kwdhash.gen: keywords genhash.pl
 	$(PERL) genhash.pl < keywords > kwdhash.gen
 
-ldlinux.bin: ldlinux.asm kwdhash.gen version.gen
+ldlinux.bin: ldlinux.asm kwdhash.gen version.gen gfxboot.inc
 	$(NASM) -f bin -DDATE_STR="'$(DATE)'" -DHEXDATE="$(HEXDATE)" \
 		-DMAP=$(@:.bin=.map) -l $(@:.bin=.lst) -o $@ $<
 	$(PERL) checkov.pl ldlinux.map $@
@@ -131,16 +131,18 @@
 		-DMAP=$(@:.bin=.map) -l $(@:.bin=.lst) -o $@ $<
 	$(PERL) checkov.pl $(@:.bin=.map) $@
 
-isolinux.bin: isolinux.asm kwdhash.gen version.gen checksumiso.pl
+isolinux.bin: isolinux.asm kwdhash.gen version.gen checksumiso.pl gfxboot.inc
 	$(NASM) -f bin -DDATE_STR="'$(DATE)'" -DHEXDATE="$(HEXDATE)" \
 		-DMAP=$(@:.bin=.map) -l $(@:.bin=.lst) -o $@ $<
+	./add_crc $@
 	$(PERL) checkov.pl $(@:.bin=.map) $@
 	$(PERL) checksumiso.pl $@
 
 # Special verbose version of isolinux.bin
-isolinux-debug.bin: isolinux-debug.asm kwdhash.gen version.gen checksumiso.pl
+isolinux-debug.bin: isolinux-debug.asm kwdhash.gen version.gen checksumiso.pl gfxboot.inc
 	$(NASM) -f bin -DDATE_STR="'$(DATE)'" -DHEXDATE="$(HEXDATE)" \
 		-DMAP=$(@:.bin=.map) -l $(@:.bin=.lst) -o $@ $<
+	./add_crc $@
 	$(PERL) checkov.pl $(@:.bin=.map) $@
 	$(PERL) checksumiso.pl $@
 
--- parseconfig.inc
+++ parseconfig.inc
@@ -81,7 +81,7 @@
 ;
 ; "localboot" command (PXELINUX, ISOLINUX)
 ;
-%if IS_PXELINUX || IS_ISOLINUX
+%if IS_PXELINUX || IS_ISOLINUX || IS_SYSLINUX
 pc_localboot:	call getint
 		cmp byte [VKernel],0		; ("label" section only)
 		je .err
@@ -262,7 +262,26 @@
 		mov [SerialPort], word 0
 		ret
 
+%ifdef WITH_GFX
+%if IS_SYSLINUX
 ;
+; like pc_setint16, but patch sector read funtion, too
+;
+pc_disksize:
+		push ax
+		call getint
+		pop si
+		jc .err
+		mov [si],bx
+		mov word [getlinsec.patch+1], getlinsec3 - getlinsec.patch - 3
+		or bx,bx
+		jz .err
+		call cache_metadata
+.err:		ret
+%endif
+%endif
+
+;
 ; "F"-key command
 ;
 pc_fkey:	push ax
--- pxelinux.asm
+++ pxelinux.asm
@@ -899,6 +899,9 @@
 ; AX contains the appropriate return code.
 ;
 local_boot:
+%ifdef WITH_GFX
+		call gfx_done
+%endif
 		push cs
 		pop ds
 		mov [LocalBootType],ax
--- README.gfxboot
+++ README.gfxboot
@@ -0,0 +1,41 @@
+Graphical boot screen
+=====================
+
+  syslinux/isolinux support a graphical boot screen using VESA BIOS
+  extensions. (Note that this is different from the graphics support that
+  syslinux comes with).
+
+  To use it you have to prepare a special boot logo file and put a line like
+  this into syslinux.cfg/isolinux.cfg:
+
+    gfxboot foo
+
+  The tools to create 'foo' from the above example are in the gfxboot
+  package. Please _do_ have a look at its documentation before you begin.
+
+  Note that you cannot use comboot images and graphics at the same time as
+  the memory used overlaps the comboot loading area.
+
+  If you encouter problems with the graphics code, hold down SHIFT while
+  syslinux starts. This will put it into 'failsafe' mode that lets you
+  interactively skip critical parts (like monitor detection).
+
+
+
+Spread boot images over several floppy disks (syslinux)
+=======================================================
+
+  You can prepare boot disks with a file system that spans several disks.
+  The 'mkbootdisk' script from the openSUSE project can create a suitable
+  file system.
+
+  syslinux will ask you for disk changes if necessary. To enable this
+  feature, use
+
+    disksize <size_of_single_disk_in_sectors>
+
+  Note that every individual disk must have at least a valid FAT boot
+  sector. syslinux will use the serial number stored there to verify that
+  the correct disk has been inserted (its last hex digit is the zero based
+  disk number).
+
--- rllpack.inc
+++ rllpack.inc
@@ -28,7 +28,7 @@
 ;
 ; rllpack:
 ;	Pack CX bytes from DS:SI into ES:DI
-;	Returns updated SI, DI and CX = number of bytes output
+;	Returns updated SI, DI and DX = number of bytes output
 ;
 rllpack:
 		push ax
--- runkernel.inc
+++ runkernel.inc
@@ -202,6 +202,15 @@
                 pop ds
 		sub si,cmd_line_here
 		mov [CmdLineLen],si		; Length including final null
+
+%ifdef WITH_GFX
+		mov eax,[KernelSects]
+		mov esi,ds
+		shl esi,4
+		add esi,KernelCName
+		call gfx_progress_init
+%endif
+
 ;
 ; Now check if we have a large kernel, which needs to be loaded high
 ;
@@ -299,6 +308,19 @@
                 jz nk_noinitrd
 		call parse_load_initrd
 nk_noinitrd:
+
+%ifdef WITH_GFX
+		call gfx_progress_done
+
+		cmp byte [gfx_cd_changed],0
+		jz .no_cd_change
+		mov al,6
+		xor si,si
+		xor di,di
+		call gfx_infobox
+.no_cd_change:
+%endif 
+
 ;
 ; Abandon hope, ye that enter here!  We do no longer permit aborts.
 ;
@@ -307,6 +329,10 @@
 		mov si,ready_msg
 		call cwritestr
 
+%ifdef WITH_GFX
+		call gfx_done
+%endif
+
 		call vgaclearmode		; We can't trust ourselves after this
 
 		UNLOAD_PREP			; Module-specific hook
@@ -521,6 +547,34 @@
 
 .got_start:
 		push si
+
+%ifdef WITH_GFX
+		cmp byte [si],'+'
+		jnz .got_start_10
+		mov byte [cs:gfx_cd_changed],1
+		inc si
+		push es
+		push ds
+		push si
+		push cs
+		pop es
+		mov cx,100h
+		mov di,trackbuf
+		push di
+		rep movsb
+		mov byte [es:di],0
+		pop si
+		xor di,di
+		mov al,5		; ask for cd change
+		push cs
+		pop ds
+		call gfx_infobox
+		pop si
+		pop ds
+		pop es
+.got_start_10:
+%endif
+
 		mov di,InitRD		; Target buffer for mangled name
 		call mangle_name
 		call loadinitrd
@@ -608,6 +662,20 @@
 		jmp crlf			; Print carriage return and return
 
 .notthere:
+
+%ifdef WITH_GFX
+		cmp byte [gfx_ok],0
+		jz .nogfx
+		mov si,InitRDCName
+		xor di,di
+		mov al,2
+		call gfx_infobox
+		call gfx_progress_done
+		mov si,no_msg
+		jmp abort_load
+.nogfx:
+%endif
+
                 mov si,err_noinitrd
                 call cwritestr
                 mov si,InitRDCName
@@ -616,7 +684,21 @@
                 jmp abort_load
 
 no_high_mem:    				; Error routine
+
+%ifdef WITH_GFX
+		cmp byte [gfx_ok],0
+		jz .nogfx
 		mov si,err_nohighmem
+		xor di,di
+		mov al,0 
+		call gfx_infobox
+		call gfx_progress_done
+		mov si,no_msg
+		jmp abort_load
+.nogfx:
+%endif
+
+		mov si,err_nohighmem
                 jmp abort_load
 
                 ret
--- syslinux.doc
+++ syslinux.doc
@@ -187,7 +187,7 @@
         Append nothing.  APPEND with a single hyphen as argument in a
         LABEL section can be used to override a global APPEND.
 
-  LOCALBOOT type			[ISOLINUX, PXELINUX]
+  LOCALBOOT type			[ISOLINUX, SYSLINUX, PXELINUX]
 	On PXELINUX, specifying "LOCALBOOT 0" instead of a "KERNEL"
 	option means invoking this particular label will cause a local
 	disk boot instead of booting a kernel.
@@ -201,12 +201,11 @@
 	UNDI or PXE stacks are, don't worry -- you don't want them,
 	just specify 0.
 
-	On ISOLINUX, the "type" specifies the local drive number to
-	boot from; 0x00 is the primary floppy drive and 0x80 is the
-	primary hard drive.  The special value -1 causes ISOLINUX to
-	report failure to the BIOS, which, on recent BIOSes, should
-	mean that the next boot device in the boot sequence should be
-	activated.
+	On ISOLINUX and SYSLINUX, the "type" specifies the local drive
+	number to boot from; 0x00 is the primary floppy drive and 0x80 is
+	the primary hard drive.  The special value -1 causes them to report
+	failure to the BIOS, which, on recent BIOSes, should mean that the
+	next boot device in the boot sequence should be activated.
 
 IMPLICIT flag_val
         If flag_val is 0, do not load a kernel image unless it has been
--- ui.inc
+++ ui.inc
@@ -15,6 +15,12 @@
 ;
 		call parse_config		; Parse configuration file
 no_config_file:
+
+%ifdef WITH_GFX
+		; build gfx menu
+		call gfx_setup_menu
+%endif
+
 ;
 ; Check whether or not we are supposed to display the boot prompt.
 ;
@@ -28,6 +34,21 @@
 		cmp word [NoEscape],0		; If NOESCAPE, no prompt,
 		jne auto_boot			; always run default cmd
 
+%ifdef WITH_GFX
+		cmp byte [gfx_ok],0
+		jz .nogfx
+		mov edi,ds
+		shl edi,4
+		add edi,command_line
+		mov ecx,max_cmd_len
+		xor eax,eax
+		xchg eax,[KbdTimeout]		; only the first time
+		call gfx_input
+		cmp ax,1
+		jnz load_kernel
+.nogfx:
+%endif
+
 		mov si,boot_prompt
 		call cwritestr
 
@@ -260,9 +281,21 @@
 		push word real_mode_seg
 		pop es
 		mov di,cmd_line_here
+
+%ifdef WITH_GFX
+		; gfx code includes them
+		cmp byte [gfx_ok],0
+		jnz .isgfx
+%endif
+
 		mov si,VKernelBuf+vk_append
 		mov cx,[VKernelBuf+vk_appendlen]
 		rep movsb
+
+%ifdef WITH_GFX
+.isgfx:
+%endif
+
 		mov [CmdLinePtr],di		; Where to add rest of cmd
 		pop es
 		mov di,KernelName
@@ -277,7 +310,7 @@
 %endif
 		xor bx,bx			; Try only one version
 
-%if IS_PXELINUX || IS_ISOLINUX
+%if IS_PXELINUX || IS_ISOLINUX || IS_SYSLINUX
 		; Is this a "localboot" pseudo-kernel?
 %if IS_PXELINUX
 		cmp byte [VKernelBuf+vk_rname+4], 0
@@ -361,6 +394,19 @@
 		push di
                 call unmangle_name              ; Get human form
 		mov si,err_notfound		; Complain about missing kernel
+
+%ifdef WITH_GFX
+		cmp byte [gfx_ok],0
+		jz .nogfx
+		pop si
+		xor di,di
+		mov al,2
+		call gfx_infobox
+		mov si,no_msg
+		jmp abort_load
+.nogfx:
+%endif
+
 		call cwritestr
 		pop si				; KernelCName
                 call cwritestr