systemd/handle-numlock-value-in-etc-sysconfig-keyboard.patch
Dr. Werner Fink 6e615f2c31 Accepting request 182204 from home:fcrozat:branches:Base:System
- Update to release 205:
  + two new unit types have been introduced:
    - Scope units are very similar to service units, however, are
      created out of pre-existing processes -- instead of PID 1
      forking off the processes.
    - Slice units may be used to partition system resources in an
      hierarchial fashion and then assign other units to them. By
      default there are now three slices: system.slice (for all
      system services), user.slice (for all user sessions),
      machine.slice (for VMs and containers).
  + new concept of "transient" units, which are created at runtime
    using an API and not based on configuration from disk.
  + logind has been updated to make use of scope and slice units to
    manage user sessions. Logind will no longer create cgroups
    hierchies itself but will relying on PID 1.
  + A new mini-daemon "systemd-machined" has been added which
    may be used by virtualization managers to register local
    VMs/containers. machinectl tool has been added to query
    meta-data from systemd-machined.
  + Low-level cgroup configuration options ControlGroup=,
    ControlGroupModify=, ControlGroupPersistent=,
    ControlGroupAttribute= have been removed. High-level attribute
    settings or slice units should be used instead?
  + A new bus call SetUnitProperties() has been added to alter
    various runtime parameters of a unit, including cgroup
    parameters. systemctl gained set-properties command to wrap
    this call.
  + A new tool "systemd-run" has been added which can be used to
    run arbitrary command lines as transient services or scopes,
    while configuring a number of settings via the command

OBS-URL: https://build.opensuse.org/request/show/182204
OBS-URL: https://build.opensuse.org/package/show/Base:System/systemd?expand=0&rev=412
2013-07-04 15:28:49 +00:00

192 lines
6.4 KiB
Diff

Set NumLock according to /etc/sysconfig/keyboard.
https://bugzilla.novell.com/show_bug.cgi?id=746595
Authors:
Stanislav Brabec <sbrabec@suse.cz>
Cristian Rodríguez <crrodriguez@opensuse.org>
Index: systemd-205/src/vconsole/vconsole-setup.c
===================================================================
--- systemd-205.orig/src/vconsole/vconsole-setup.c
+++ systemd-205/src/vconsole/vconsole-setup.c
@@ -42,6 +42,10 @@
#include "fileio.h"
#include "strv.h"
+#define BIOS_DATA_AREA 0x400
+#define BDA_KEYBOARD_STATUS_FLAGS_4 0x97
+#define BDA_KSF4_NUMLOCK_MASK 0x02
+
static bool is_vconsole(int fd) {
unsigned char data[1];
@@ -321,12 +325,14 @@ int main(int argc, char **argv) {
char *vc_kbd_delay = NULL;
char *vc_kbd_rate = NULL;
char *vc_kbd_disable_caps_lock = NULL;
+ char *vc_kbd_numlock = NULL;
char *vc_compose_table = NULL;
pid_t kbd_rate_pid = 0, compose_table_pid = 0;
#endif
int fd = -1;
bool utf8;
bool disable_capslock = false;
+ bool numlock = false;
pid_t font_pid = 0, keymap_pid = 0;
bool font_copy = false;
int r = EXIT_FAILURE;
@@ -389,6 +395,7 @@ int main(int argc, char **argv) {
"KBD_DELAY", &vc_kbd_delay,
"KBD_RATE", &vc_kbd_rate,
"KBD_DISABLE_CAPS_LOCK", &vc_kbd_disable_caps_lock,
+ "KBD_NUMLOCK", &vc_kbd_numlock,
"COMPOSETABLE", &vc_compose_table,
NULL);
if (r < 0 && r != -ENOENT)
@@ -403,6 +410,36 @@ int main(int argc, char **argv) {
log_warning("Failed to read /etc/sysconfig/console: %s", strerror(-r));
disable_capslock = vc_kbd_disable_caps_lock && strcasecmp(vc_kbd_disable_caps_lock, "YES") == 0;
+#if defined(__i386__) || defined(__x86_64__)
+ if (vc_kbd_numlock && strcaseeq(vc_kbd_numlock, "bios")) {
+ int _cleanup_close_ fdmem;
+ char c;
+
+ fdmem = open ("/dev/mem", O_RDONLY);
+
+ if(fdmem < 0) {
+ r = EXIT_FAILURE;
+ log_error("Failed to open /dev/mem: %m");
+ goto finish;
+ }
+
+ if(lseek(fdmem, BIOS_DATA_AREA + BDA_KEYBOARD_STATUS_FLAGS_4, SEEK_SET) == (off_t) -1) {
+ r = EXIT_FAILURE;
+ log_error("Failed to seek /dev/mem: %m");
+ goto finish;
+ }
+
+ if(read (fdmem, &c, sizeof(char)) == -1) {
+ r = EXIT_FAILURE;
+ log_error("Failed to read /dev/mem: %m");
+ goto finish;
+ }
+
+ if (c & BDA_KSF4_NUMLOCK_MASK)
+ numlock = true;
+ } else
+#endif
+ numlock = vc_kbd_numlock && strcaseeq(vc_kbd_numlock, "yes");
#endif
}
@@ -425,6 +462,10 @@ int main(int argc, char **argv) {
finish:
if (keymap_pid > 0)
wait_for_terminate_and_warn(KBD_LOADKEYS, keymap_pid);
+ if (numlock)
+ touch("/run/numlock-on");
+ else
+ unlink("/run/numlock-on");
#ifdef HAVE_SYSV_COMPAT
if (compose_table_pid > 0)
@@ -444,6 +485,7 @@ finish:
free(vc_font);
free(vc_font_map);
free(vc_font_unimap);
+ free(vc_kbd_numlock);
#ifdef HAVE_SYSV_COMPAT
free(vc_kbd_delay);
free(vc_kbd_rate);
Index: systemd-205/Makefile.am
===================================================================
--- systemd-205.orig/Makefile.am
+++ systemd-205/Makefile.am
@@ -2361,6 +2361,19 @@ dist_udevrules_DATA += \
rules/61-accelerometer.rules
# ------------------------------------------------------------------------------
+numlock_on_SOURCES = \
+ src/login/numlock-on.c
+
+numlock_on_CFLAGS = \
+ $(AM_CFLAGS)
+
+udevlibexec_PROGRAMS += \
+ numlock-on
+
+dist_udevrules_DATA += \
+ rules/73-seat-numlock.rules
+
+# ------------------------------------------------------------------------------
if ENABLE_GUDEV
if ENABLE_GTK_DOC
SUBDIRS += \
Index: systemd-205/rules/73-seat-numlock.rules
===================================================================
--- /dev/null
+++ systemd-205/rules/73-seat-numlock.rules
@@ -0,0 +1,8 @@
+# This file is part of SUSE customization of systemd.
+#
+# systemd is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+SUBSYSTEM=="tty", ACTION=="add", KERNEL=="tty[0-9]|tty1[0-2]", TEST=="/run/numlock-on", RUN+="numlock-on $env{DEVNAME}"
Index: systemd-205/src/login/numlock-on.c
===================================================================
--- /dev/null
+++ systemd-205/src/login/numlock-on.c
@@ -0,0 +1,34 @@
+/*
+ * numlock-on.c: Turn numlock-on
+ *
+ * This file may be freely copied under the terms of the GNU General
+ * Public License (GPL), version 2, or at your option any later
+ * version.
+
+ * Copyright (C) 2013 Stanislav Brabec, SUSE
+ *
+ * based on setleds.c, which is
+ * Copyright (C) 1994-1999 Andries E. Brouwer
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/ioctl.h>
+#include <linux/kd.h>
+
+int
+main(int argc, char **argv) {
+ char flags;
+
+ if (ioctl(0, KDGKBLED, &flags)) {
+ perror("KDGKBLED");
+ exit(1);
+ }
+
+ if (ioctl(0, KDSKBLED, flags | LED_NUM | (LED_NUM << 4))) {
+ perror("KDSKBLED");
+ exit(1);
+ }
+
+ exit(0);
+}
Index: systemd-205/units/systemd-vconsole-setup.service.in
===================================================================
--- systemd-205.orig/units/systemd-vconsole-setup.service.in
+++ systemd-205/units/systemd-vconsole-setup.service.in
@@ -11,7 +11,7 @@ Documentation=man:systemd-vconsole-setup
DefaultDependencies=no
Conflicts=shutdown.target
After=systemd-readahead-collect.service systemd-readahead-replay.service
-Before=sysinit.target shutdown.target
+Before=sysinit.target shutdown.target systemd-udev-trigger.service
ConditionPathExists=/dev/tty0
[Service]