3afec739d5
- Update to sysvinit (2.88dsf) world; urgency=low
* Mention new home on Savannah in README.
* Revert change from Fedora/RedHat where the now obsolete command
INIT_CMD_CHANGECONS was introduced. Based on feedback and patch
from Bill Nottingham.
* Adjust makefile to make sure the install directories are created
before files are copied into them.
* Simplify build rules, based on patch from Mike Frysinger and Gentoo.
* Fix minor bug in optimizing of argument parsing. Based on
report from jakemus on freshmeat.
* Add casts to get rid of compiler warning about signed/unsigned issues.
* Change tty handling in init to make sure the UTF-8 flag is not cleared
on boot. Patch from Samuel Thibault.
* Add Makefile in toplevel directory.
* Print usage information when shutdown is used by non-root user.
Patch from Mike Frysinger and Gentoo.
* Sync shutdown manual page and usage information. Patch from Mike
Frysinger and Gentoo.
* Fix race condition in utmp writing. Patch from Gil Kloepfer via
Mike Frysinger and Gentoo.
* Rewrite findtty() in bootlogd to recursively search /dev/ for the
correct device, to handle terminal devices for example in /dev/pty/.
Patch from Debian.
* Make sure bootlogd findpty() returns an error value when it fails to
find a usable pty. Patch from Rob Leslie via Debian.
* Make sure bootlogd fflush() every line, even if asked not to flush
to disk using fdatasync(). Patch from Scott Gifford via Debian.
* Add compatibility code to handle old path "/etc/powerstatus" for a
while.
* Incude definition for MNT_DETACH which is missing in older GNU libc
headers.
* Do not strip binaries before installing them, to make it easier to
get binaries with debug information installed.
* Add the comment from Andrea Arcangeli about the correct
place of setting the default childhandler within spawn().
* Make sure that newline is printed out for last(1) even
if an utmp record entry is truncated.
* Check if utmp not only exists but also is writable and delay
writing out of the utmp runlevel record if utmp is not writable.
* Be able to find libcrypt also on 64 bit based architectures.
* Add option -w to the last command to display the full user and
domain names in the output. Patch from Petr Lautrbach.
* Add a manual page for utmpdump as this tool is sometimes
very useful even if not intended for normal use.
* Use paths.h macros for wall
* Change path "/etc/powerstatus" to "/var/run/powerstatus"
* Detected also removable block devices at halt/reboot to be able
to flush data and send them the ATA standby command. This should
avoid data loss on USB sticks and other removable block devices.
* Flush block devices on halt/reboot if not done by the kernel.
* Set SHELL to /bin/sh in the environmant of shutdown.
* Retry to write out shutdown messages if interrupted.
* pidof/killall5 - make omit pid list a dynamic one.
* pidof - provide '-n' to skip stat(2) syscall on network based FS.
* init - avoid compiler warnings
* init - initialize console by using the macros from ttydefaults.h
* init - add the possiblity to ignore further interrupts from keyboard
* init - add the possiblity to set sane terminal line settings
* sulogin - add the possibility to reset the terminal io
* Fix some minor problems
* init - enable is_selinux_enabled() to detect selinuxfs
* Add fix for Debian bug #536574 -- Can be enabled by -DACCTON_OFF
* Add helper program fstab-decode to make it easier to handle
/etc/mtab content. Patch by Miloslav Trmac and Fedora.
* Add fix for Debian bug #335023 - Make sure TERM is set on FreeBSD.
* Add fix for Debian bug #374038 - Make it clear that shutdown -c can
only cancel a waiting shutdown, not an active one.
* Add note to pidof manual page about the use of readlink(2). Patch by
Bill Nottingham and Fedora.
* Add PAM patch contrib/notify-pam-dead.patch based on Debian bug
#68621, which will add PAM support for programs spawned by init on
the console like sulogin. Based on patch by Topi Miettinen. This
patch is not applied by default yet while we review its
usefullness. It is only helpful for session handling, as sulogin
do not use and will not use a PAM conv() function. The current
sulogin is able to handle DES as well as MD5, SHA, and Blowfish
encrypted passwords due using getpwnam(3).
* Move utmp/wtmp before the execvp() in spawn() to be sure to
use the correct pid even on a controlling tty
* Remaining problem is that the pid of the second fork() for
getting a controlling tty isn't that reported by spawn()
* Re-enable writting utmp/wtmp for boot scripts
* Extend sulogin to support additional encryption algorithms
* Re-enable maintenance message of sulogin
* Enable the sulogin fallback password check to handle MD5, SHA, and
Blowfish encrypted passwords in case of getpwnam(3) fails.
* sulogin picking the SELinux context was broken. Patch by Daniel Walsh
- Test out sysvinit (2.88dsf) UNRELEASED; urgency=low
- Update to sysvinit (2.87dsf) world; urgency=low
* Document -e and -t options for telinit in init(8).
* Document in halt(8) that -n might not disable all syncing.
Patch by Bill Nottingham and Fedora
* Adjust output from "last -x". In reboot lines, print endpoint
of uptime too. In shutdown lines print downtimes rather than
the time between downs. Fix typo in string compare in last.c.
Patch by Thomas Hood.
* Improve handling of IPv6 addresses in last. Patch from Fedora.
* Add new option -F to last, to output full date string instead
of the short form provided by default. Patch from Olaf Dabrunz
and SuSe.
* Fix utmp/wtmp updating on 64-bit platforms. Patch by Bill
Nottingham and Fedora.
* Avoid unchecked return value from malloc() in utmpdump.
Patch from Christian 'Dr. Disk' Hechelmann and Fedora.
* Make sure to use execle and no execl when passing environment to
the new process. Patch from RedHat.
* Correct init to make sure the waiting status is preserved across
re-exec. Patch from RedHat.
* Correct init to avoid race condition when starting programs during
boot. Patch from SuSe.
* Allow 'telinit u' in runlevels 0 and 6. Patch from Thomas Hood.
* Improve error message from init if fork() fail. Patch found in Suse.
* Add support for SE Linux capability handling. Patch from Manoj
Srivastava, adjusted to avoid aborting if SE policy was loaded in
the initrd with patch from Bill Nottingham and Fedora.
* Add -c option to pidof for only matching processes with the same
process root. Ignore -c when not running as root. Patch from
Thomas Woerner and Fedora.
* Add usleep in killall5 after killing processes, to force the kernel
to reschedule. Patch from SuSe.
* Modify pidof to not print empty line if no pid was found.
* Modify init and sulogin to fix emergency mode's tty, making sure ^C
and ^Z work when booting with 'emergency' kernel option. Patch from
Samuel Thibault.
* Modify init to allow some time for failed opens to resolve themselves.
Patch from Bill Nottingham and Fedora.
* Modify init to shut down IDE, SCSI and SATA disks properly. Patches
from Sebastian Reichelt, Werner Fink and SuSe.
* Modify wall to use UT_LINESIZE from <utmp.h> instead of hardcoded
string lengths. Patch from SuSe.
* Change wall to make halt include hostname in output.
* Change killall to avoid killing init by mistake. Patch from SuSe.
* Change killall5 to use the exit value to report if it found any
processes to kill. Patch from Debian.
* Add option -o opmitpid to killall5, to make it possible to skip
some pids during shutdown. Based on patch from Colin Watson and
Ubuntu.
* Modify killall to work better with user space file system, by
changing cwd to /proc when stopping and killing processes, and
avoiding stat() when the value isn't used. Also, lock process
pages in memory to avoid paging when user processes are stopped.
Patch from Debian and Goswin von Brederlow with changes by Kel
Modderman.
* Change shutdown to only accept flags -H and -P with the -h flag,
and document this requirement in the manual page.
* Change reboot/halt to work properly when used as a login shell.
Patch by Dale R. Worley and Fedora.
* Let sulogin fall back to the staticly linked /bin/sash if both roots
shell and /bin/sh fail to execute.
OBS-URL: https://build.opensuse.org/package/show/Base:System/sysvinit?expand=0&rev=40
317 lines
9.3 KiB
RPMSpec
317 lines
9.3 KiB
RPMSpec
#
|
|
# spec file for package sysvinit (Version 2.88)
|
|
#
|
|
# Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany.
|
|
#
|
|
# All modifications and additions to the file contributed by third parties
|
|
# remain the property of their copyright owners, unless otherwise agreed
|
|
# upon. The license for this file, and modifications and additions to the
|
|
# file, is the same license as for the pristine package itself (unless the
|
|
# license for the pristine package is not an Open Source License, in which
|
|
# case the license is the MIT License). An "Open Source License" is a
|
|
# license that conforms to the Open Source Definition (Version 1.9)
|
|
# published by the Open Source Initiative.
|
|
|
|
# Please submit bugfixes or comments via http://bugs.opensuse.org/
|
|
#
|
|
|
|
# norootforbuild
|
|
|
|
|
|
Name: sysvinit
|
|
%define MGVER 0.9.6s
|
|
%define PDVER 2.0.2
|
|
%define KPVER 2.16
|
|
%define SCVER 1.10
|
|
%define SIVER 2.88
|
|
%define START 0.54
|
|
License: GPLv2+
|
|
Group: System/Base
|
|
AutoReqProv: on
|
|
Version: 2.88
|
|
Release: 1
|
|
Summary: SysV-Style init
|
|
BuildRoot: %{_tmppath}/%{name}-%{version}-build
|
|
BuildRequires: audit-devel libselinux-devel libsepol-devel pam-devel
|
|
Source: http://download.savannah.gnu.org/releases/sysvinit/sysvinit-2.88dsf.tar.bz2
|
|
Source2: killproc-2.16.tar.bz2
|
|
Source3: powerd-2.0.2.tar.bz2
|
|
Source4: showconsole-1.10.tar.bz2
|
|
Source5: startpar-0.54.tar.bz2
|
|
Source6: rc.powerd
|
|
Source7: sysvinit-rpmlintrc
|
|
Source8: mkinitrd-boot.sh
|
|
Source9: mkinitrd-kill1.sh
|
|
Source10: mkinitrd-kill2.sh
|
|
Patch: sysvinit-2.88dsf.dif
|
|
Patch1: sysvinit-2.82-startstop.patch
|
|
Patch2: sysvinit-2.88dsf-suse.patch
|
|
Patch3: sysvinit-2.88dsf-no-kill.patch
|
|
Patch4: notify-pam-dead.patch
|
|
Patch5: sysvinit-last-ipv6-heuristic.patch
|
|
Patch20: powerd-2.0.2.dif
|
|
Patch30: killproc-2.16.dif
|
|
Patch40: showconsole-1.10.dif
|
|
Patch50: startpar-0.54.dif
|
|
Requires: sysvinit-tools
|
|
Provides: sbin_init
|
|
|
|
%description
|
|
System V style init programs by Miquel van Smoorenburg that control the
|
|
booting and shutdown of your system. These support a number of system
|
|
runlevels, each one associated with a specific set of utilities. For
|
|
example, the normal system runlevel is 3, which starts a getty on
|
|
virtual consoles tty1-tty6. Runlevel 5 starts xdm. Runlevel 0 shuts
|
|
down the system. See the individual man pages for inittab, initscript,
|
|
halt, init, powerd, reboot, runlevel, shutdown, and telinit for
|
|
more information.
|
|
|
|
%package tools
|
|
License: GPLv2+
|
|
Summary: Tools for basic booting
|
|
Group: System/Base
|
|
%if 0%{suse_version} > 1120
|
|
Requires(preun): coreutils mkinitrd %insserv_prereq
|
|
Requires(postun): coreutils mkinitrd %insserv_prereq
|
|
%else
|
|
PreReq: coreutils mkinitrd %insserv_prereq
|
|
%endif
|
|
|
|
%description tools
|
|
Helper tools from sysvinit that support booting, including but not exclusive
|
|
to startpar, killproc and pidof. System V init specific programs are in the
|
|
sysvinit package.
|
|
|
|
%prep
|
|
%setup -n sysvinit-%{SIVER}dsf -q -b 2 -b 3 -b 4 -b 5
|
|
%patch1 -p0 -b .startstop
|
|
%patch2 -p0 -b .suse
|
|
%patch3 -p0 -b .no-kill
|
|
%patch4 -p0 -b .pam
|
|
%patch5 -p2 -b .ipv6
|
|
%patch
|
|
pushd ../powerd-%{PDVER}
|
|
%patch20
|
|
popd
|
|
pushd ../killproc-%{KPVER}
|
|
%patch30
|
|
popd
|
|
pushd ../showconsole-%{SCVER}
|
|
%patch40
|
|
popd
|
|
pushd ../startpar-%{START}
|
|
%patch50
|
|
popd
|
|
%_fixowner .
|
|
%_fixgroup .
|
|
/bin/chmod -Rf a+rX,g-w,o-w .
|
|
|
|
%build
|
|
RPM_OPT_FLAGS="${RPM_OPT_FLAGS} -D_FILE_OFFSET_BITS=64 -pipe"
|
|
CC=gcc
|
|
export RPM_OPT_FLAGS CC
|
|
make %{?_smp_mflags} WITH_SELINUX=yes DISTRO=SuSE
|
|
pushd ../showconsole-%{SCVER}
|
|
make %{?_smp_mflags}
|
|
popd
|
|
pushd ../killproc-%{KPVER}
|
|
make %{?_smp_mflags} INC="-I../showconsole-%{SCVER} -L../showconsole-%{SCVER}"
|
|
popd
|
|
pushd ../powerd-%{PDVER}
|
|
%ifnarch s390 s390x
|
|
./configure --prefix= --bindir='$(DESTDIR)/sbin' \
|
|
--mandir='$(DESTDIR)%{_mandir}' \
|
|
--sbindir='$(DESTDIR)/sbin'
|
|
make %{?_smp_mflags} CFLAGS="-I../sysvinit-%{SIVER}dsf/src $RPM_OPT_FLAGS "
|
|
%endif
|
|
popd
|
|
pushd ../startpar-%{START}
|
|
make %{?_smp_mflags} INC="-I../showconsole-%{SCVER} -L../showconsole-%{SCVER}"
|
|
popd
|
|
|
|
%install
|
|
rm -rf ${RPM_BUILD_ROOT}
|
|
mkdir ${RPM_BUILD_ROOT}
|
|
mkdir -m 755 -p ${RPM_BUILD_ROOT}/bin
|
|
mkdir -m 755 -p ${RPM_BUILD_ROOT}/dev
|
|
mkdir -m 755 -p ${RPM_BUILD_ROOT}/etc
|
|
mkdir -m 755 -p ${RPM_BUILD_ROOT}/sbin
|
|
mkdir -m 755 -p ${RPM_BUILD_ROOT}/usr/bin
|
|
mkdir -m 755 -p ${RPM_BUILD_ROOT}/usr/include
|
|
mkdir -m 755 -p ${RPM_BUILD_ROOT}%{_mandir}/man1
|
|
mkdir -m 755 -p ${RPM_BUILD_ROOT}%{_mandir}/man5
|
|
mkdir -m 755 -p ${RPM_BUILD_ROOT}%{_mandir}/man8
|
|
make install -C src MANPATH=%{_mandir} ROOT=${RPM_BUILD_ROOT} WITH_SELINUX=yes DISTRO=SuSE
|
|
test -p ${RPM_BUILD_ROOT}/dev/initctl || {
|
|
rm -f ${RPM_BUILD_ROOT}/dev/initctl
|
|
mknod ${RPM_BUILD_ROOT}/dev/initctl p
|
|
chmod 600 ${RPM_BUILD_ROOT}/dev/initctl
|
|
}
|
|
pushd ../showconsole-%{SCVER}
|
|
make install MANPATH=%{_mandir} INSTBINFLAGS="-m 0700" DESTDIR=${RPM_BUILD_ROOT}
|
|
popd
|
|
pushd ../killproc-%{KPVER}
|
|
make install MANPATH=%{_mandir} INSTBINFLAGS="-m 0755" DESTDIR=${RPM_BUILD_ROOT}
|
|
popd
|
|
pushd ../powerd-%{PDVER}
|
|
%ifnarch s390 s390x
|
|
make install DESTDIR=${RPM_BUILD_ROOT}
|
|
cp README README.powerd
|
|
cp SUPPORTED SUPPORTED.powerd
|
|
cp FAQ FAQ.powerd
|
|
echo '# ' > ${RPM_BUILD_ROOT}/etc/powerd.conf
|
|
echo '# /etc/powerd.conf for powerd version-2.02' >> ${RPM_BUILD_ROOT}/etc/powerd.conf
|
|
echo '# ' >> ${RPM_BUILD_ROOT}/etc/powerd.conf
|
|
echo '# read manual page of detectups(8) and powerd(8) its self.' >> ${RPM_BUILD_ROOT}/etc/powerd.conf
|
|
echo '# ' >> ${RPM_BUILD_ROOT}/etc/powerd.conf
|
|
mkdir -p ${RPM_BUILD_ROOT}/etc/init.d
|
|
install -m 0744 %{SOURCE6} ${RPM_BUILD_ROOT}/etc/init.d/powerd
|
|
%endif
|
|
popd
|
|
pushd ../startpar-%{START}
|
|
make install DESTDIR=${RPM_BUILD_ROOT}
|
|
popd
|
|
#
|
|
# Install mkinitrd scriptlets
|
|
#
|
|
install -d $RPM_BUILD_ROOT/lib/mkinitrd/scripts
|
|
install -m 0755 %{SOURCE8} $RPM_BUILD_ROOT/lib/mkinitrd/scripts/boot-blogd.sh
|
|
install -m 0755 %{SOURCE9} $RPM_BUILD_ROOT/lib/mkinitrd/scripts/boot-killblogd.sh
|
|
install -m 0755 %{SOURCE10} $RPM_BUILD_ROOT/lib/mkinitrd/scripts/boot-killblogd2.sh
|
|
#
|
|
# Remove files not packed:
|
|
#
|
|
rm -f ${RPM_BUILD_ROOT}/usr/include/{initreq.h,libblogger.h}
|
|
rm -f ${RPM_BUILD_ROOT}/usr/lib/libblogger.a
|
|
rm -f ${RPM_BUILD_ROOT}%{_mandir}/man1/mesg.1*
|
|
%ifarch s390 s390x
|
|
rm -f ${RPM_BUILD_ROOT}%{_mandir}/man8/powerd.8*
|
|
rm -f ${RPM_BUILD_ROOT}%{_mandir}/man8/detectups.8*
|
|
rm -f ${RPM_BUILD_ROOT}/sbin/powerd
|
|
rm -f ${RPM_BUILD_ROOT}/sbin/detectups
|
|
%endif
|
|
chmod 444 ${RPM_BUILD_ROOT}%{_mandir}/man?/*
|
|
|
|
%preun tools
|
|
%stop_on_removal powered
|
|
|
|
%post tools
|
|
if test -x /sbin/telinit -a -p /dev/initctl -a -f /proc/1/exe -a -d /proc/1/root -a ! -d /.build ; then
|
|
if test $(stat -Lc '%%D-%%i' /) = $(stat -Lc '%%D-%%i' /proc/1/root) ; then
|
|
/sbin/telinit u
|
|
fi
|
|
fi
|
|
if test -x /sbin/mkinitrd_setup; then
|
|
mkinitrd_setup
|
|
fi
|
|
|
|
%postun tools
|
|
%insserv_cleanup
|
|
if test -x /sbin/mkinitrd_setup; then
|
|
mkinitrd_setup
|
|
fi
|
|
|
|
%clean
|
|
rm -rf ${RPM_BUILD_ROOT}
|
|
|
|
%files
|
|
%defattr (-,root,root,755)
|
|
%config /etc/pam.d/init
|
|
/sbin/halt
|
|
/sbin/init
|
|
/sbin/poweroff
|
|
/sbin/reboot
|
|
/sbin/runlevel
|
|
/sbin/shutdown
|
|
/sbin/telinit
|
|
%doc %{_mandir}/man8/halt.8.gz
|
|
%doc %{_mandir}/man5/initscript.5.gz
|
|
%doc %{_mandir}/man5/inittab.5.gz
|
|
%doc %{_mandir}/man8/init.8.gz
|
|
%doc %{_mandir}/man8/poweroff.8.gz
|
|
%doc %{_mandir}/man8/reboot.8.gz
|
|
%doc %{_mandir}/man8/runlevel.8.gz
|
|
%doc %{_mandir}/man8/shutdown.8.gz
|
|
%doc %{_mandir}/man8/telinit.8.gz
|
|
|
|
%files tools
|
|
%defattr (-,root,root,755)
|
|
%ifnarch s390 s390x
|
|
%config /etc/powerd.conf
|
|
%config /etc/init.d/powerd
|
|
%doc ../powerd-%{PDVER}/README.powerd
|
|
%doc ../powerd-%{PDVER}/SUPPORTED.powerd
|
|
%doc ../powerd-%{PDVER}/FAQ.powerd
|
|
%doc ../powerd-%{PDVER}/powerd.conf.monitor
|
|
%doc ../powerd-%{PDVER}/powerd.conf.peer
|
|
%endif
|
|
# %doc contrib/bootlogd.README
|
|
%dir /lib/mkinitrd
|
|
%dir /lib/mkinitrd/scripts
|
|
/lib/mkinitrd/scripts/boot-blogd.sh
|
|
/lib/mkinitrd/scripts/boot-killblogd.sh
|
|
/lib/mkinitrd/scripts/boot-killblogd2.sh
|
|
/bin/mountpoint
|
|
/bin/pidof
|
|
/bin/usleep
|
|
/bin/fsync
|
|
/usr/bin/last
|
|
/usr/bin/lastb
|
|
/usr/bin/utmpdump
|
|
# /sbin/bootlogd
|
|
# /sbin/intr
|
|
/sbin/blogger
|
|
/sbin/blogd
|
|
/sbin/fstab-decode
|
|
/sbin/showconsole
|
|
/sbin/setconsole
|
|
/sbin/isserial
|
|
/sbin/checkproc
|
|
/sbin/pidofproc
|
|
/sbin/killproc
|
|
/sbin/killall5
|
|
/sbin/pidof
|
|
%ifnarch s390 s390x
|
|
/sbin/powerd
|
|
/sbin/detectups
|
|
%endif
|
|
/sbin/startpar
|
|
/sbin/vhangup
|
|
/sbin/mkill
|
|
/sbin/startproc
|
|
/sbin/start_daemon
|
|
/sbin/sulogin
|
|
%doc %{_mandir}/man1/last.1.gz
|
|
%doc %{_mandir}/man1/lastb.1.gz
|
|
%doc %{_mandir}/man1/usleep.1.gz
|
|
%doc %{_mandir}/man1/fsync.1.gz
|
|
# /usr/include/libblogger.h
|
|
# /usr/lib/libblogger.a
|
|
%doc %{_mandir}/man1/mountpoint.1.gz
|
|
%doc %{_mandir}/man1/utmpdump.1.gz
|
|
# %doc %{_mandir}/man8/bootlogd.8.gz
|
|
%doc %{_mandir}/man8/blogger.8.gz
|
|
%doc %{_mandir}/man8/blogd.8.gz
|
|
%doc %{_mandir}/man8/fstab-decode.8.gz
|
|
%doc %{_mandir}/man8/showconsole.8.gz
|
|
%doc %{_mandir}/man8/setconsole.8.gz
|
|
%doc %{_mandir}/man8/isserial.8.gz
|
|
%doc %{_mandir}/man8/checkproc.8.gz
|
|
%doc %{_mandir}/man8/pidofproc.8.gz
|
|
#%doc %{_mandir}/man8/intr.8.gz
|
|
%doc %{_mandir}/man8/killall5.8.gz
|
|
%doc %{_mandir}/man8/killproc.8.gz
|
|
%doc %{_mandir}/man8/pidof.8.gz
|
|
%ifnarch s390 s390x
|
|
%doc %{_mandir}/man8/powerd.8.gz
|
|
%doc %{_mandir}/man8/detectups.8.gz
|
|
%endif
|
|
%doc %{_mandir}/man8/startproc.8.gz
|
|
%doc %{_mandir}/man8/start_daemon.8.gz
|
|
%doc %{_mandir}/man8/startpar.8.gz
|
|
%doc %{_mandir}/man8/sulogin.8.gz
|
|
%doc %{_mandir}/man8/vhangup.8.gz
|
|
%doc %{_mandir}/man8/mkill.8.gz
|
|
|
|
%changelog
|