Accepting request 419605 from Base:System

1

OBS-URL: https://build.opensuse.org/request/show/419605
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/u-boot?expand=0&rev=78

0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch

@@ -0,0 +1,81 @@
+From a58d1d13c48333a9a1aceb253d6932e4aad2790d Mon Sep 17 00:00:00 2001
+From: Alexander Graf <agraf@suse.de>
+Date: Thu, 11 Aug 2016 12:12:09 +0200
+Subject: [PATCH] bcm2835_gpio: Implement GPIOF_FUNC
+
+So far we could only tell the gpio framework that a GPIO was mapped as input or
+output, not as alternative function.
+
+This patch adds support for determining whether a function is mapped as
+alternative.
+
+Signed-off-by: Alexander Graf <agraf@suse.de>
+---
+ arch/arm/mach-bcm283x/include/mach/gpio.h |  2 ++
+ drivers/gpio/bcm2835_gpio.c               | 30 +++++++++++++++++-------------
+ 2 files changed, 19 insertions(+), 13 deletions(-)
+
+diff --git a/arch/arm/mach-bcm283x/include/mach/gpio.h b/arch/arm/mach-bcm283x/include/mach/gpio.h
+index e6e5d16..b2df75a 100644
+--- a/arch/arm/mach-bcm283x/include/mach/gpio.h
++++ b/arch/arm/mach-bcm283x/include/mach/gpio.h
+@@ -66,4 +66,6 @@ struct bcm2835_gpio_platdata {
+ 	unsigned long base;
+ };
+ 
++int bcm2835_gpio_get_func_id(struct udevice *dev, unsigned gpio);
++
+ #endif /* _BCM2835_GPIO_H_ */
+diff --git a/drivers/gpio/bcm2835_gpio.c b/drivers/gpio/bcm2835_gpio.c
+index fbc641d..8b88d79 100644
+--- a/drivers/gpio/bcm2835_gpio.c
++++ b/drivers/gpio/bcm2835_gpio.c
+@@ -44,15 +44,6 @@ static int bcm2835_gpio_direction_output(struct udevice *dev, unsigned gpio,
+ 	return 0;
+ }
+ 
+-static bool bcm2835_gpio_is_output(const struct bcm2835_gpios *gpios, int gpio)
+-{
+-	u32 val;
+-
+-	val = readl(&gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]);
+-	val &= BCM2835_GPIO_FSEL_MASK << BCM2835_GPIO_FSEL_SHIFT(gpio);
+-	return val ? true : false;
+-}
+-
+ static int bcm2835_get_value(const struct bcm2835_gpios *gpios, unsigned gpio)
+ {
+ 	unsigned val;
+@@ -81,15 +72,28 @@ static int bcm2835_gpio_set_value(struct udevice *dev, unsigned gpio,
+ 	return 0;
+ }
+ 
+-static int bcm2835_gpio_get_function(struct udevice *dev, unsigned offset)
++int bcm2835_gpio_get_func_id(struct udevice *dev, unsigned gpio)
+ {
+ 	struct bcm2835_gpios *gpios = dev_get_priv(dev);
++	u32 val;
++
++	val = readl(&gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]);
++
++	return (val >> BCM2835_GPIO_FSEL_SHIFT(gpio) & BCM2835_GPIO_FSEL_MASK);
++}
++
++static int bcm2835_gpio_get_function(struct udevice *dev, unsigned offset)
++{
++	int funcid = bcm2835_gpio_get_func_id(dev, offset);
+ 
+-	/* GPIOF_FUNC is not implemented yet */
+-	if (bcm2835_gpio_is_output(gpios, offset))
++	switch (funcid) {
++	case BCM2835_GPIO_OUTPUT:
+ 		return GPIOF_OUTPUT;
+-	else
++	case BCM2835_GPIO_INPUT:
+ 		return GPIOF_INPUT;
++	default:
++		return GPIOF_FUNC;
++	}
+ }
+ 
+ 

0011-serial-bcm283x_mu-Detect-disabled-s.patch

@@ -0,0 +1,103 @@
+From 44febd54d6cd3b5d8c2957fc30c1d17d79bebf56 Mon Sep 17 00:00:00 2001
+From: Alexander Graf <agraf@suse.de>
+Date: Thu, 4 Aug 2016 09:04:18 +0200
+Subject: [PATCH] serial: bcm283x_mu: Detect disabled serial device
+
+On the raspberry pi, you can disable the serial port to gain dynamic frequency
+scaling which can get handy at times.
+
+However, in such a configuration the serial controller gets its rx queue filled
+up with zero bytes which then happily get transmitted on to whoever calls
+getc() today.
+
+This patch adds detection logic for that case by checking whether the RX pin is
+mapped to GPIO15 and disables the mini uart if it is not mapped properly.
+
+That way we can leave the driver enabled in the tree and can determine during
+runtime whether serial is usable or not, having a single binary that allows for
+uart and non-uart operation.
+
+Signed-off-by: Alexander Graf <agraf@suse.de>
+
+---
+
+v2 -> v3:
+
+  - Disable and detect pinmux in board file
+---
+ board/raspberrypi/rpi/rpi.c | 29 +++++++++++++++++++++++++++++
+ configs/rpi_3_32b_defconfig |  1 +
+ configs/rpi_3_defconfig     |  1 +
+ include/configs/rpi.h       |  1 +
+ 4 files changed, 32 insertions(+)
+
+diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
+index a2336fc..feaa21e 100644
+--- a/board/raspberrypi/rpi/rpi.c
++++ b/board/raspberrypi/rpi/rpi.c
+@@ -451,6 +451,35 @@ int board_init(void)
+ 	return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
+ }
+ 
++static bool rpi_is_serial_active(void)
++{
++#ifndef CONFIG_PL01X_SERIAL
++	int serial_gpio = 15;
++	struct udevice *dev;
++
++	/*
++	 * The RPi3 disables the mini uart by default. The easiest way to find
++	 * out whether it is available is to check if the pin is muxed.
++	 */
++	if (uclass_first_device(UCLASS_GPIO, &dev) || !dev)
++		return true;
++
++	if (bcm2835_gpio_get_func_id(dev, serial_gpio) != BCM2835_GPIO_ALT5)
++		return false;
++#endif
++
++	return true;
++}
++
++int board_late_init(void)
++{
++	/* Disable mini-UART I/O if it's not pinmuxed to our pins */
++	if (!rpi_is_serial_active())
++		gd->cur_serial_dev = NULL;
++
++	return 0;
++}
++
+ int board_mmc_init(bd_t *bis)
+ {
+ 	ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1);
+diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
+index 922e01b..4c2f106 100644
+--- a/configs/rpi_3_32b_defconfig
++++ b/configs/rpi_3_32b_defconfig
+@@ -20,3 +20,4 @@ CONFIG_CMD_FAT=y
+ CONFIG_CMD_FS_GENERIC=y
+ CONFIG_PHYS_TO_BUS=y
+ CONFIG_OF_LIBFDT=y
++# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
+diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
+index bff92df..288214c 100644
+--- a/configs/rpi_3_defconfig
++++ b/configs/rpi_3_defconfig
+@@ -19,3 +19,4 @@ CONFIG_CMD_FAT=y
+ CONFIG_CMD_FS_GENERIC=y
+ CONFIG_PHYS_TO_BUS=y
+ CONFIG_OF_LIBFDT=y
++# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
+diff --git a/include/configs/rpi.h b/include/configs/rpi.h
+index b5543f4..e3b890a 100644
+--- a/include/configs/rpi.h
++++ b/include/configs/rpi.h
+@@ -22,6 +22,7 @@
+ 
+ /* Architecture, CPU, etc.*/
+ #define CONFIG_ARCH_CPU_INIT
++#define CONFIG_BOARD_LATE_INIT
+ 
+ /* Use SoC timer for AArch32, but architected timer for AArch64 */
+ #ifndef CONFIG_ARM64

0012-x86-Move-table-csum-into-separate-h.patch

@@ -0,0 +1,80 @@
+From d3be4adda0bb701a4eb823f0410ad7978a099cf5 Mon Sep 17 00:00:00 2001
+From: Alexander Graf <agraf@suse.de>
+Date: Sun, 7 Aug 2016 12:33:30 +0200
+Subject: [PATCH] x86: Move table csum into separate header
+
+We need the checksum function without all the other table functionality
+soon, so let's split it out into its own header file.
+
+Signed-off-by: Alexander Graf <agraf@suse.de>
+---
+ arch/x86/include/asm/tables.h |  2 ++
+ arch/x86/lib/tables.c         | 12 ------------
+ include/tables_csum.h         | 22 ++++++++++++++++++++++
+ 3 files changed, 24 insertions(+), 12 deletions(-)
+ create mode 100644 include/tables_csum.h
+
+diff --git a/arch/x86/include/asm/tables.h b/arch/x86/include/asm/tables.h
+index ae9f0d0..81f98f2 100644
+--- a/arch/x86/include/asm/tables.h
++++ b/arch/x86/include/asm/tables.h
+@@ -7,6 +7,8 @@
+ #ifndef _X86_TABLES_H_
+ #define _X86_TABLES_H_
+ 
++#include <tables_csum.h>
++
+ /*
+  * All x86 tables happen to like the address range from 0xf0000 to 0x100000.
+  * We use 0xf0000 as the starting address to store those tables, including
+diff --git a/arch/x86/lib/tables.c b/arch/x86/lib/tables.c
+index f92111e..9ee6b5e 100644
+--- a/arch/x86/lib/tables.c
++++ b/arch/x86/lib/tables.c
+@@ -38,18 +38,6 @@ static table_write table_write_funcs[] = {
+ #endif
+ };
+ 
+-u8 table_compute_checksum(void *v, int len)
+-{
+-	u8 *bytes = v;
+-	u8 checksum = 0;
+-	int i;
+-
+-	for (i = 0; i < len; i++)
+-		checksum -= bytes[i];
+-
+-	return checksum;
+-}
+-
+ void table_fill_string(char *dest, const char *src, size_t n, char pad)
+ {
+ 	int start, len;
+diff --git a/include/tables_csum.h b/include/tables_csum.h
+new file mode 100644
+index 0000000..27d147b
+--- /dev/null
++++ b/include/tables_csum.h
+@@ -0,0 +1,22 @@
++/*
++ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef _TABLES_CSUM_H_
++#define _TABLES_CSUM_H_
++
++static inline u8 table_compute_checksum(void *v, int len)
++{
++	u8 *bytes = v;
++	u8 checksum = 0;
++	int i;
++
++	for (i = 0; i < len; i++)
++		checksum -= bytes[i];
++
++	return checksum;
++}
++
++#endif

0013-x86-Move-smbios-generation-into-arc.patch

@@ -0,0 +1,166 @@
+From 77426a40be72c7ee38f6d42da1ef9951044cdca0 Mon Sep 17 00:00:00 2001
+From: Alexander Graf <agraf@suse.de>
+Date: Sun, 7 Aug 2016 12:20:57 +0200
+Subject: [PATCH] x86: Move smbios generation into arch independent directory
+
+We will need the SMBIOS generation function on ARM as well going forward,
+so let's move it into a non arch specific location.
+
+Signed-off-by: Alexander Graf <agraf@suse.de>
+---
+ arch/x86/Kconfig                           | 27 ------------------------
+ arch/x86/lib/Makefile                      |  1 -
+ arch/x86/lib/tables.c                      |  2 +-
+ {arch/x86/include/asm => include}/smbios.h |  0
+ lib/Kconfig                                | 33 ++++++++++++++++++++++++++++++
+ lib/Makefile                               |  1 +
+ {arch/x86/lib => lib}/smbios.c             |  4 ++--
+ 7 files changed, 37 insertions(+), 31 deletions(-)
+ rename {arch/x86/include/asm => include}/smbios.h (100%)
+ rename {arch/x86/lib => lib}/smbios.c (99%)
+
+diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
+index 29d2307..265cea9 100644
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -453,33 +453,6 @@ config GENERATE_ACPI_TABLE
+ 	  by the operating system. It defines platform-independent interfaces
+ 	  for configuration and power management monitoring.
+ 
+-config GENERATE_SMBIOS_TABLE
+-	bool "Generate an SMBIOS (System Management BIOS) table"
+-	default y
+-	help
+-	  The System Management BIOS (SMBIOS) specification addresses how
+-	  motherboard and system vendors present management information about
+-	  their products in a standard format by extending the BIOS interface
+-	  on Intel architecture systems.
+-
+-	  Check http://www.dmtf.org/standards/smbios for details.
+-
+-config SMBIOS_MANUFACTURER
+-	string "SMBIOS Manufacturer"
+-	depends on GENERATE_SMBIOS_TABLE
+-	default SYS_VENDOR
+-	help
+-	  The board manufacturer to store in SMBIOS structures.
+-	  Change this to override the default one (CONFIG_SYS_VENDOR).
+-
+-config SMBIOS_PRODUCT_NAME
+-	string "SMBIOS Product Name"
+-	depends on GENERATE_SMBIOS_TABLE
+-	default SYS_BOARD
+-	help
+-	  The product name to store in SMBIOS structures.
+-	  Change this to override the default one (CONFIG_SYS_BOARD).
+-
+ endmenu
+ 
+ config MAX_PIRQ_LINKS
+diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
+index e17f0bb..40ea6bf 100644
+--- a/arch/x86/lib/Makefile
++++ b/arch/x86/lib/Makefile
+@@ -29,7 +29,6 @@ obj-y	+= relocate.o
+ obj-y += physmem.o
+ obj-$(CONFIG_X86_RAMTEST) += ramtest.o
+ obj-y += sfi.o
+-obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += smbios.o
+ obj-y	+= string.o
+ ifndef CONFIG_QEMU
+ obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
+diff --git a/arch/x86/lib/tables.c b/arch/x86/lib/tables.c
+index 9ee6b5e..e62705a 100644
+--- a/arch/x86/lib/tables.c
++++ b/arch/x86/lib/tables.c
+@@ -5,9 +5,9 @@
+  */
+ 
+ #include <common.h>
++#include <smbios.h>
+ #include <asm/sfi.h>
+ #include <asm/mpspec.h>
+-#include <asm/smbios.h>
+ #include <asm/tables.h>
+ #include <asm/acpi_table.h>
+ #include <asm/coreboot_tables.h>
+diff --git a/arch/x86/include/asm/smbios.h b/include/smbios.h
+similarity index 100%
+rename from arch/x86/include/asm/smbios.h
+rename to include/smbios.h
+diff --git a/lib/Kconfig b/lib/Kconfig
+index 02ca405..5a14530 100644
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -149,6 +149,39 @@ config SPL_OF_LIBFDT
+ 	  particular compatible nodes. The library operates on a flattened
+ 	  version of the device tree.
+ 
++menu "System tables"
++	depends on !EFI && !SYS_COREBOOT
++
++config GENERATE_SMBIOS_TABLE
++	bool "Generate an SMBIOS (System Management BIOS) table"
++	default y
++	depends on X86
++	help
++	  The System Management BIOS (SMBIOS) specification addresses how
++	  motherboard and system vendors present management information about
++	  their products in a standard format by extending the BIOS interface
++	  on Intel architecture systems.
++
++	  Check http://www.dmtf.org/standards/smbios for details.
++
++config SMBIOS_MANUFACTURER
++	string "SMBIOS Manufacturer"
++	depends on GENERATE_SMBIOS_TABLE
++	default SYS_VENDOR
++	help
++	  The board manufacturer to store in SMBIOS structures.
++	  Change this to override the default one (CONFIG_SYS_VENDOR).
++
++config SMBIOS_PRODUCT_NAME
++	string "SMBIOS Product Name"
++	depends on GENERATE_SMBIOS_TABLE
++	default SYS_BOARD
++	help
++	  The product name to store in SMBIOS structures.
++	  Change this to override the default one (CONFIG_SYS_BOARD).
++
++endmenu
++
+ source lib/efi/Kconfig
+ source lib/efi_loader/Kconfig
+ 
+diff --git a/lib/Makefile b/lib/Makefile
+index f48d901..c026a9e 100644
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_FIT) += fdtdec_common.o
+ obj-$(CONFIG_TEST_FDTDEC) += fdtdec_test.o
+ obj-$(CONFIG_GZIP) += gunzip.o
+ obj-$(CONFIG_GZIP_COMPRESSED) += gzip.o
++obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += smbios.o
+ obj-y += initcall.o
+ obj-$(CONFIG_LMB) += lmb.o
+ obj-y += ldiv.o
+diff --git a/arch/x86/lib/smbios.c b/lib/smbios.c
+similarity index 99%
+rename from arch/x86/lib/smbios.c
+rename to lib/smbios.c
+index 9f30550..9808ee7 100644
+--- a/arch/x86/lib/smbios.c
++++ b/lib/smbios.c
+@@ -7,10 +7,10 @@
+  */
+ 
+ #include <common.h>
++#include <smbios.h>
++#include <tables_csum.h>
+ #include <version.h>
+ #include <asm/cpu.h>
+-#include <asm/smbios.h>
+-#include <asm/tables.h>
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 

0014-efi_loader-Expose-efi_install_confi.patch

@@ -0,0 +1,93 @@
+From 5ce2f1f686c5e8ee5de054affc9ec48f7f782db5 Mon Sep 17 00:00:00 2001
+From: Alexander Graf <agraf@suse.de>
+Date: Sun, 7 Aug 2016 13:05:24 +0200
+Subject: [PATCH] efi_loader: Expose efi_install_configuration_table
+
+We want to be able to add configuration table entries from our own code as
+well as from EFI payload code. Export the boot service function internally
+too, so that we can reuse it.
+
+Signed-off-by: Alexander Graf <agraf@suse.de>
+---
+ include/efi_loader.h          |  2 ++
+ lib/efi_loader/efi_boottime.c | 22 +++++++++++++---------
+ 2 files changed, 15 insertions(+), 9 deletions(-)
+
+diff --git a/include/efi_loader.h b/include/efi_loader.h
+index 91d6a84..ac8b77a 100644
+--- a/include/efi_loader.h
++++ b/include/efi_loader.h
+@@ -130,6 +130,8 @@ uint64_t efi_add_memory_map(uint64_t start, uint64_t pages, int memory_type,
+ 			    bool overlap_only_ram);
+ /* Called by board init to initialize the EFI memory map */
+ int efi_memory_init(void);
++/* Adds new or overrides configuration table entry to the system table */
++efi_status_t efi_install_configuration_table(efi_guid_t *guid, void *table);
+ 
+ #ifdef CONFIG_EFI_LOADER_BOUNCE_BUFFER
+ extern void *efi_bounce_buffer;
+diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
+index be6f5e8..3e7a48b 100644
+--- a/lib/efi_loader/efi_boottime.c
++++ b/lib/efi_loader/efi_boottime.c
+@@ -37,7 +37,7 @@ static bool efi_is_direct_boot = true;
+  * In most cases we want to pass an FDT to the payload, so reserve one slot of
+  * config table space for it. The pointer gets populated by do_bootefi_exec().
+  */
+-static struct efi_configuration_table EFI_RUNTIME_DATA efi_conf_table[1];
++static struct efi_configuration_table EFI_RUNTIME_DATA efi_conf_table[2];
+ 
+ /*
+  * The "gd" pointer lives in a register on ARM and AArch64 that we declare
+@@ -375,31 +375,35 @@ static efi_status_t EFIAPI efi_locate_device_path(efi_guid_t *protocol,
+ 	return EFI_EXIT(EFI_NOT_FOUND);
+ }
+ 
+-static efi_status_t EFIAPI efi_install_configuration_table(efi_guid_t *guid,
+-							   void *table)
++efi_status_t efi_install_configuration_table(efi_guid_t *guid, void *table)
+ {
+ 	int i;
+ 
+-	EFI_ENTRY("%p, %p", guid, table);
+-
+ 	/* Check for guid override */
+ 	for (i = 0; i < systab.nr_tables; i++) {
+ 		if (!guidcmp(guid, &efi_conf_table[i].guid)) {
+ 			efi_conf_table[i].table = table;
+-			return EFI_EXIT(EFI_SUCCESS);
++			return EFI_SUCCESS;
+ 		}
+ 	}
+ 
+ 	/* No override, check for overflow */
+ 	if (i >= ARRAY_SIZE(efi_conf_table))
+-		return EFI_EXIT(EFI_OUT_OF_RESOURCES);
++		return EFI_OUT_OF_RESOURCES;
+ 
+ 	/* Add a new entry */
+ 	memcpy(&efi_conf_table[i].guid, guid, sizeof(*guid));
+ 	efi_conf_table[i].table = table;
+ 	systab.nr_tables = i;
+ 
+-	return EFI_EXIT(EFI_SUCCESS);
++	return EFI_SUCCESS;
++}
++
++static efi_status_t EFIAPI efi_install_configuration_table_ext(efi_guid_t *guid,
++							       void *table)
++{
++	EFI_ENTRY("%p, %p", guid, table);
++	return EFI_EXIT(efi_install_configuration_table(guid, table));
+ }
+ 
+ static efi_status_t EFIAPI efi_load_image(bool boot_policy,
+@@ -750,7 +754,7 @@ static const struct efi_boot_services efi_boot_services = {
+ 	.register_protocol_notify = efi_register_protocol_notify,
+ 	.locate_handle = efi_locate_handle,
+ 	.locate_device_path = efi_locate_device_path,
+-	.install_configuration_table = efi_install_configuration_table,
++	.install_configuration_table = efi_install_configuration_table_ext,
+ 	.load_image = efi_load_image,
+ 	.start_image = efi_start_image,
+ 	.exit = efi_exit,

0015-smbios-Allow-compilation-on-64bit-s.patch

@@ -0,0 +1,142 @@
+From 93751660f58a6286e019e580e3aecc27d4853a16 Mon Sep 17 00:00:00 2001
+From: Alexander Graf <agraf@suse.de>
+Date: Sun, 7 Aug 2016 13:15:23 +0200
+Subject: [PATCH] smbios: Allow compilation on 64bit systems
+
+The SMBIOS generation code passes pointers as u32. That causes the compiler
+to warn on casts to pointers. This patch moves all address pointers to
+uintptr_t instead.
+
+Technically u32 would be enough for the current SMBIOS2 style tables, but
+we may want to extend the code to SMBIOS3 in the future which is 64bit
+address capable.
+
+Signed-off-by: Alexander Graf <agraf@suse.de>
+---
+ arch/x86/lib/tables.c |  7 ++++++-
+ include/smbios.h      |  4 ++--
+ lib/smbios.c          | 16 ++++++++--------
+ 3 files changed, 16 insertions(+), 11 deletions(-)
+
+diff --git a/arch/x86/lib/tables.c b/arch/x86/lib/tables.c
+index e62705a..025b183 100644
+--- a/arch/x86/lib/tables.c
++++ b/arch/x86/lib/tables.c
+@@ -12,6 +12,11 @@
+ #include <asm/acpi_table.h>
+ #include <asm/coreboot_tables.h>
+ 
++static u32 write_smbios_table_wrapper(u32 addr)
++{
++	return write_smbios_table(addr);
++}
++
+ /**
+  * Function prototype to write a specific configuration table
+  *
+@@ -34,7 +39,7 @@ static table_write table_write_funcs[] = {
+ 	write_acpi_tables,
+ #endif
+ #ifdef CONFIG_GENERATE_SMBIOS_TABLE
+-	write_smbios_table,
++	write_smbios_table_wrapper,
+ #endif
+ };
+ 
+diff --git a/include/smbios.h b/include/smbios.h
+index 623a703..5962d4c 100644
+--- a/include/smbios.h
++++ b/include/smbios.h
+@@ -221,7 +221,7 @@ static inline void fill_smbios_header(void *table, int type,
+  * @handle:	the structure's handle, a unique 16-bit number
+  * @return:	size of the structure
+  */
+-typedef int (*smbios_write_type)(u32 *addr, int handle);
++typedef int (*smbios_write_type)(uintptr_t *addr, int handle);
+ 
+ /**
+  * write_smbios_table() - Write SMBIOS table
+@@ -231,6 +231,6 @@ typedef int (*smbios_write_type)(u32 *addr, int handle);
+  * @addr:	start address to write SMBIOS table
+  * @return:	end address of SMBIOS table
+  */
+-u32 write_smbios_table(u32 addr);
++uintptr_t write_smbios_table(uintptr_t addr);
+ 
+ #endif /* _SMBIOS_H_ */
+diff --git a/lib/smbios.c b/lib/smbios.c
+index 9808ee7..8dfd486 100644
+--- a/lib/smbios.c
++++ b/lib/smbios.c
+@@ -69,7 +69,7 @@ static int smbios_string_table_len(char *start)
+ 	return len + 1;
+ }
+ 
+-static int smbios_write_type0(u32 *current, int handle)
++static int smbios_write_type0(uintptr_t *current, int handle)
+ {
+ 	struct smbios_type0 *t = (struct smbios_type0 *)*current;
+ 	int len = sizeof(struct smbios_type0);
+@@ -98,7 +98,7 @@ static int smbios_write_type0(u32 *current, int handle)
+ 	return len;
+ }
+ 
+-static int smbios_write_type1(u32 *current, int handle)
++static int smbios_write_type1(uintptr_t *current, int handle)
+ {
+ 	struct smbios_type1 *t = (struct smbios_type1 *)*current;
+ 	int len = sizeof(struct smbios_type1);
+@@ -114,7 +114,7 @@ static int smbios_write_type1(u32 *current, int handle)
+ 	return len;
+ }
+ 
+-static int smbios_write_type2(u32 *current, int handle)
++static int smbios_write_type2(uintptr_t *current, int handle)
+ {
+ 	struct smbios_type2 *t = (struct smbios_type2 *)*current;
+ 	int len = sizeof(struct smbios_type2);
+@@ -132,7 +132,7 @@ static int smbios_write_type2(u32 *current, int handle)
+ 	return len;
+ }
+ 
+-static int smbios_write_type3(u32 *current, int handle)
++static int smbios_write_type3(uintptr_t *current, int handle)
+ {
+ 	struct smbios_type3 *t = (struct smbios_type3 *)*current;
+ 	int len = sizeof(struct smbios_type3);
+@@ -152,7 +152,7 @@ static int smbios_write_type3(u32 *current, int handle)
+ 	return len;
+ }
+ 
+-static int smbios_write_type4(u32 *current, int handle)
++static int smbios_write_type4(uintptr_t *current, int handle)
+ {
+ 	struct smbios_type4 *t = (struct smbios_type4 *)*current;
+ 	int len = sizeof(struct smbios_type4);
+@@ -185,7 +185,7 @@ static int smbios_write_type4(u32 *current, int handle)
+ 	return len;
+ }
+ 
+-static int smbios_write_type32(u32 *current, int handle)
++static int smbios_write_type32(uintptr_t *current, int handle)
+ {
+ 	struct smbios_type32 *t = (struct smbios_type32 *)*current;
+ 	int len = sizeof(struct smbios_type32);
+@@ -198,7 +198,7 @@ static int smbios_write_type32(u32 *current, int handle)
+ 	return len;
+ }
+ 
+-static int smbios_write_type127(u32 *current, int handle)
++static int smbios_write_type127(uintptr_t *current, int handle)
+ {
+ 	struct smbios_type127 *t = (struct smbios_type127 *)*current;
+ 	int len = sizeof(struct smbios_type127);
+@@ -221,7 +221,7 @@ static smbios_write_type smbios_write_funcs[] = {
+ 	smbios_write_type127
+ };
+ 
+-u32 write_smbios_table(u32 addr)
++uintptr_t write_smbios_table(uintptr_t addr)
+ {
+ 	struct smbios_entry *se;
+ 	u32 tables;

0016-smbios-Expose-in-efi_loader-as-tabl.patch

@@ -0,0 +1,192 @@
+From 0cf473210474a7b3dd11de4de82ef8fc3a2516e2 Mon Sep 17 00:00:00 2001
+From: Alexander Graf <agraf@suse.de>
+Date: Sun, 7 Aug 2016 13:18:56 +0200
+Subject: [PATCH] smbios: Expose in efi_loader as table
+
+We can pass SMBIOS easily as EFI configuration table to an EFI payload. This
+patch adds enablement for that case.
+
+While at it, we also enable SMBIOS generation for ARM systems, since they support
+EFI_LOADER.
+
+Signed-off-by: Alexander Graf <agraf@suse.de>
+
+---
+
+v1 -> v2:
+
+  - Fix whitespace
+---
+ cmd/bootefi.c        |  3 +++
+ include/efi_api.h    |  4 ++++
+ include/efi_loader.h |  2 ++
+ include/smbios.h     |  1 +
+ lib/Kconfig          |  4 ++--
+ lib/smbios.c         | 36 ++++++++++++++++++++++++++++++++++++
+ 6 files changed, 48 insertions(+), 2 deletions(-)
+
+diff --git a/cmd/bootefi.c b/cmd/bootefi.c
+index a80ed48..ca144ff 100644
+--- a/cmd/bootefi.c
++++ b/cmd/bootefi.c
+@@ -204,6 +204,9 @@ static unsigned long do_bootefi_exec(void *efi, void *fdt)
+ 	if (!memcmp(bootefi_device_path[0].str, "N\0e\0t", 6))
+ 		loaded_image_info.device_handle = nethandle;
+ #endif
++#ifdef CONFIG_GENERATE_SMBIOS_TABLE
++	efi_smbios_register();
++#endif
+ 
+ 	/* Initialize EFI runtime services */
+ 	efi_reset_system_init();
+diff --git a/include/efi_api.h b/include/efi_api.h
+index f572b88..bdb600e 100644
+--- a/include/efi_api.h
++++ b/include/efi_api.h
+@@ -201,6 +201,10 @@ struct efi_runtime_services {
+ 	EFI_GUID(0xb1b621d5, 0xf19c, 0x41a5, \
+ 		 0x83, 0x0b, 0xd9, 0x15, 0x2c, 0x69, 0xaa, 0xe0)
+ 
++#define SMBIOS_TABLE_GUID \
++	EFI_GUID(0xeb9d2d31, 0x2d88, 0x11d3,  \
++		 0x9a, 0x16, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d)
++
+ struct efi_configuration_table
+ {
+ 	efi_guid_t guid;
+diff --git a/include/efi_loader.h b/include/efi_loader.h
+index ac8b77a..b0e8a7f 100644
+--- a/include/efi_loader.h
++++ b/include/efi_loader.h
+@@ -85,6 +85,8 @@ int efi_disk_register(void);
+ int efi_gop_register(void);
+ /* Called by bootefi to make the network interface available */
+ int efi_net_register(void **handle);
++/* Called by bootefi to make SMBIOS tables available */
++void efi_smbios_register(void);
+ 
+ /* Called by networking code to memorize the dhcp ack package */
+ void efi_net_set_dhcp_ack(void *pkt, int len);
+diff --git a/include/smbios.h b/include/smbios.h
+index 5962d4c..fb6396a 100644
+--- a/include/smbios.h
++++ b/include/smbios.h
+@@ -55,6 +55,7 @@ struct __packed smbios_entry {
+ #define BIOS_CHARACTERISTICS_SELECTABLE_BOOT	(1 << 16)
+ 
+ #define BIOS_CHARACTERISTICS_EXT1_ACPI		(1 << 0)
++#define BIOS_CHARACTERISTICS_EXT1_UEFI		(1 << 3)
+ #define BIOS_CHARACTERISTICS_EXT2_TARGET	(1 << 2)
+ 
+ struct __packed smbios_type0 {
+diff --git a/lib/Kconfig b/lib/Kconfig
+index 5a14530..d7f75fe 100644
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -150,12 +150,12 @@ config SPL_OF_LIBFDT
+ 	  version of the device tree.
+ 
+ menu "System tables"
+-	depends on !EFI && !SYS_COREBOOT
++	depends on (!EFI && !SYS_COREBOOT) || (ARM && EFI_LOADER)
+ 
+ config GENERATE_SMBIOS_TABLE
+ 	bool "Generate an SMBIOS (System Management BIOS) table"
+ 	default y
+-	depends on X86
++	depends on X86 || EFI_LOADER
+ 	help
+ 	  The System Management BIOS (SMBIOS) specification addresses how
+ 	  motherboard and system vendors present management information about
+diff --git a/lib/smbios.c b/lib/smbios.c
+index 8dfd486..4d85155 100644
+--- a/lib/smbios.c
++++ b/lib/smbios.c
+@@ -7,10 +7,13 @@
+  */
+ 
+ #include <common.h>
++#include <efi_loader.h>
+ #include <smbios.h>
+ #include <tables_csum.h>
+ #include <version.h>
++#ifdef CONFIG_X86
+ #include <asm/cpu.h>
++#endif
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+@@ -79,14 +82,20 @@ static int smbios_write_type0(uintptr_t *current, int handle)
+ 	t->vendor = smbios_add_string(t->eos, "U-Boot");
+ 	t->bios_ver = smbios_add_string(t->eos, PLAIN_VERSION);
+ 	t->bios_release_date = smbios_add_string(t->eos, U_BOOT_DMI_DATE);
++#ifdef CONFIG_ROM_SIZE
+ 	t->bios_rom_size = (CONFIG_ROM_SIZE / 65536) - 1;
++#endif
+ 	t->bios_characteristics = BIOS_CHARACTERISTICS_PCI_SUPPORTED |
+ 				  BIOS_CHARACTERISTICS_SELECTABLE_BOOT |
+ 				  BIOS_CHARACTERISTICS_UPGRADEABLE;
+ #ifdef CONFIG_GENERATE_ACPI_TABLE
+ 	t->bios_characteristics_ext1 = BIOS_CHARACTERISTICS_EXT1_ACPI;
+ #endif
++#ifdef CONFIG_EFI_LOADER
++	t->bios_characteristics_ext1 |= BIOS_CHARACTERISTICS_EXT1_UEFI;
++#endif
+ 	t->bios_characteristics_ext2 = BIOS_CHARACTERISTICS_EXT2_TARGET;
++
+ 	t->bios_major_release = 0xff;
+ 	t->bios_minor_release = 0xff;
+ 	t->ec_major_release = 0xff;
+@@ -152,6 +161,7 @@ static int smbios_write_type3(uintptr_t *current, int handle)
+ 	return len;
+ }
+ 
++#ifdef CONFIG_X86
+ static int smbios_write_type4(uintptr_t *current, int handle)
+ {
+ 	struct smbios_type4 *t = (struct smbios_type4 *)*current;
+@@ -184,6 +194,7 @@ static int smbios_write_type4(uintptr_t *current, int handle)
+ 
+ 	return len;
+ }
++#endif
+ 
+ static int smbios_write_type32(uintptr_t *current, int handle)
+ {
+@@ -216,7 +227,9 @@ static smbios_write_type smbios_write_funcs[] = {
+ 	smbios_write_type1,
+ 	smbios_write_type2,
+ 	smbios_write_type3,
++#ifdef CONFIG_X86
+ 	smbios_write_type4,
++#endif
+ 	smbios_write_type32,
+ 	smbios_write_type127
+ };
+@@ -267,3 +280,26 @@ uintptr_t write_smbios_table(uintptr_t addr)
+ 
+ 	return addr;
+ }
++
++#ifdef CONFIG_EFI_LOADER
++
++void efi_smbios_register(void)
++{
++	static efi_guid_t smbios_guid = SMBIOS_TABLE_GUID;
++	/* Map within the low 32 bits, to allow for 32bit SMBIOS tables */
++	uint64_t dmi = 0xffffffff;
++	/* Reserve 4kb for SMBIOS */
++	uint64_t pages = 1;
++	int memtype = EFI_RUNTIME_SERVICES_DATA;
++
++	if (efi_allocate_pages(1, memtype, pages, &dmi) != EFI_SUCCESS)
++		return;
++
++	/* Generate SMBIOS tables */
++	write_smbios_table(dmi);
++
++	/* And expose them to our EFI payload */
++	efi_install_configuration_table(&smbios_guid, (void*)dmi);
++}
++
++#endif

0017-efi_loader-Fix-efi_install_configur.patch

@@ -0,0 +1,30 @@
+From e84c4ada85f7faad7aa5be4bc0478d5695ce657b Mon Sep 17 00:00:00 2001
+From: Alexander Graf <agraf@suse.de>
+Date: Sun, 7 Aug 2016 18:18:10 +0200
+Subject: [PATCH] efi_loader: Fix efi_install_configuration_table
+
+So far we were only installing the FDT table and didn't have space
+to store any other. Hence nobody realized that our efi table allocation
+was broken in that it didn't set the indicator for the number of tables
+plus one.
+
+This patch fixes it, allowing code to allocate new efi tables.
+
+Signed-off-by: Alexander Graf <agraf@suse.de>
+---
+ lib/efi_loader/efi_boottime.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
+index 3e7a48b..4d0e077 100644
+--- a/lib/efi_loader/efi_boottime.c
++++ b/lib/efi_loader/efi_boottime.c
+@@ -394,7 +394,7 @@ efi_status_t efi_install_configuration_table(efi_guid_t *guid, void *table)
+ 	/* Add a new entry */
+ 	memcpy(&efi_conf_table[i].guid, guid, sizeof(*guid));
+ 	efi_conf_table[i].table = table;
+-	systab.nr_tables = i;
++	systab.nr_tables = i + 1;
+ 
+ 	return EFI_SUCCESS;
+ }

0018-smbios-Provide-serial-number.patch

@@ -0,0 +1,41 @@
+From 10f3bcd0ae173e5fdab71127374c719851a8dddf Mon Sep 17 00:00:00 2001
+From: Alexander Graf <agraf@suse.de>
+Date: Sun, 7 Aug 2016 18:29:12 +0200
+Subject: [PATCH] smbios: Provide serial number
+
+If the system has a valid "serial#" environment variable set (which boards that
+can find it out programatically set automatically), use that as input for the
+serial number and UUID fields in the SMBIOS tables.
+
+Signed-off-by: Alexander Graf <agraf@suse.de>
+
+---
+
+v1 -> v2:
+
+  - Also populate UUID
+---
+ lib/smbios.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/lib/smbios.c b/lib/smbios.c
+index 4d85155..2d0df23 100644
+--- a/lib/smbios.c
++++ b/lib/smbios.c
+@@ -111,11 +111,16 @@ static int smbios_write_type1(uintptr_t *current, int handle)
+ {
+ 	struct smbios_type1 *t = (struct smbios_type1 *)*current;
+ 	int len = sizeof(struct smbios_type1);
++	char *serial_str = getenv("serial#");
+ 
+ 	memset(t, 0, sizeof(struct smbios_type1));
+ 	fill_smbios_header(t, SMBIOS_SYSTEM_INFORMATION, len, handle);
+ 	t->manufacturer = smbios_add_string(t->eos, CONFIG_SMBIOS_MANUFACTURER);
+ 	t->product_name = smbios_add_string(t->eos, CONFIG_SMBIOS_PRODUCT_NAME);
++	if (serial_str) {
++		strncpy((char*)t->uuid, serial_str, sizeof(t->uuid));
++		t->serial_number = smbios_add_string(t->eos, serial_str);
++	}
+ 
+ 	len = t->length + smbios_string_table_len(t->eos);
+ 	*current += len;

pre_checkin.sh

@@ -69,6 +69,7 @@ if [ ! "$1" -o ! "$2" -o ! "$3" ]; then
     exit 0
 fi
 
+CHANGE_DATE=$(date -d "$(head -n 2 u-boot.changes | tail -n 1 | cut -d- -f1 )" +%s)
 MVEBU_SPL=0
 OMAP_SPL=0
 ROCKCHIP_SPL=0
@@ -130,6 +131,7 @@ sed "s/BOARDCONFIG/$BOARDCONFIG/g
 s/BOARDNAME/$BOARDNAME/g
 s/ARCH_RESTRICTIONS/$ARCH_RESTRICTIONS/g
 s/BINEND/$BINEND/g
+s/CHANGE_DATE/$CHANGE_DATE/g
 s/ORIGEN_SPL/$ORIGEN_SPL/g
 s/ARNDALE_SPL/$ARNDALE_SPL/g
 s/MVEBU_SPL/$MVEBU_SPL/g

u-boot-a10-olinuxino-lime.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-a10-olinuxino-lime.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" A10-OLinuXino-Lime_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-a13-olinuxino.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-a13-olinuxino.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" A13-OLinuXino_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-a13-olinuxinom.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-a13-olinuxinom.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" A13-OLinuXinoM_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-a20-olinuxino-lime.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-a20-olinuxino-lime.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" A20-OLinuXino-Lime_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-a20-olinuxino-lime2.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-a20-olinuxino-lime2.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" A20-OLinuXino-Lime2_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-a20-olinuxinomicro.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-a20-olinuxinomicro.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" A20-OLinuXino_MICRO_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-am335xboneblack.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-am335xboneblack.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" am335x_boneblack_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-am335xevm.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-am335xevm.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" am335x_evm_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-am57xxevm.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-am57xxevm.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" am57xx_evm_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-am57xxevmnodt.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-am57xxevmnodt.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" am57xx_evm_nodt_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-arndale.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-arndale.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" arndale_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-bananapi.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-bananapi.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" Bananapi_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-clearfog.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-clearfog.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" clearfog_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-colibrit20.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-colibrit20.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" colibri_t20_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-cubieboard.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-cubieboard.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" Cubieboard_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-cubieboard2.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-cubieboard2.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" Cubieboard2_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-cubietruck.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-cubietruck.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" Cubietruck_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-dragonboard410c.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-dragonboard410c.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" dragonboard410c_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-firefly-rk3288.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-firefly-rk3288.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" firefly-rk3288_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-highbank.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-highbank.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" highbank_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-hyundaia7hd.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-hyundaia7hd.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" Hyundai_A7HD_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-jetson-tk1.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-jetson-tk1.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" jetson-tk1_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-melea1000.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-melea1000.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" Mele_A1000_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-merriia80optimus.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-merriia80optimus.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" Merrii_A80_Optimus_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-mx53loco.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-mx53loco.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" mx53loco_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-mx6cuboxi.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-mx6cuboxi.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" mx6cuboxi_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-mx6qsabrelite.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-mx6qsabrelite.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" mx6qsabrelite_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-odroid-c2.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-odroid-c2.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" odroid-c2_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-odroid-xu3.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-odroid-xu3.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" odroid-xu3_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-odroid.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-odroid.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" odroid_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-omap3beagle.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-omap3beagle.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" omap3_beagle_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-omap4panda.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-omap4panda.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" omap4_panda_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-orangepipc.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-orangepipc.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" orangepi_pc_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-p2371-2180.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-p2371-2180.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" p2371-2180_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-paz00.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-paz00.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" paz00_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-pcm051rev3.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-pcm051rev3.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" pcm051_rev3_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-pine64plus.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-pine64plus.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" pine64_plus_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-qemu-ppce500.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-qemu-ppce500.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" qemu-ppce500_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-rpi.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-rpi.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" rpi_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-rpi2.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-rpi2.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" rpi_2_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-rpi3.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-rpi3.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" rpi_3_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-snow.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-snow.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" snow_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-spring.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-spring.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" spring_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot-udoo.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot-udoo.spec

@@ -50,6 +50,15 @@ Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
 Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
 Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
 Patch0009:      0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
+Patch0010:      0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+Patch0011:      0011-serial-bcm283x_mu-Detect-disabled-s.patch
+Patch0012:      0012-x86-Move-table-csum-into-separate-h.patch
+Patch0013:      0013-x86-Move-smbios-generation-into-arc.patch
+Patch0014:      0014-efi_loader-Expose-efi_install_confi.patch
+Patch0015:      0015-smbios-Allow-compilation-on-64bit-s.patch
+Patch0016:      0016-smbios-Expose-in-efi_loader-as-tabl.patch
+Patch0017:      0017-efi_loader-Fix-efi_install_configur.patch
+Patch0018:      0018-smbios-Provide-serial-number.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@@ -94,8 +103,18 @@ This package contains documentation for U-Boot firmware.
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
+%patch0014 -p1
+%patch0015 -p1
+%patch0016 -p1
+%patch0017 -p1
+%patch0018 -p1
 
 %build
+export SOURCE_DATE_EPOCH=1471010869
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" udoo_defconfig
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -110,6 +129,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=1471010869
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot

u-boot.changes

@@ -1,3 +1,35 @@
+-------------------------------------------------------------------
+Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
+
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+- Update to v3 of the serial detect code (bsc#989511)
+* Patches added:
+  0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
+* Patches rebased:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
+- Add SMBIOS table on ARM (bsc#989509)
+* Patches added:
+  0012-x86-Move-table-csum-into-separate-h.patch
+  0013-x86-Move-smbios-generation-into-arc.patch
+  0014-efi_loader-Expose-efi_install_confi.patch
+  0015-smbios-Allow-compilation-on-64bit-s.patch
+  0016-smbios-Expose-in-efi_loader-as-tabl.patch
+  0017-efi_loader-Fix-efi_install_configur.patch
+  0018-smbios-Provide-serial-number.patch
+
+-------------------------------------------------------------------
+Mon Aug  1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
+
+- Use deterministic build date by setting DATE_SOURCE_EPOCH
+
+-------------------------------------------------------------------
+Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
+
+- Add dynamic detection of rpi3 uart (bsc#989511)
+- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
+* Patches added:
+  0010-serial-bcm283x_mu-Detect-disabled-s.patch
+
 -------------------------------------------------------------------
 Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
 

u-boot.spec.in

@@ -80,6 +80,7 @@ This package contains documentation for U-Boot firmware.
 PATCH_EXEC
 
 %build
+export SOURCE_DATE_EPOCH=CHANGE_DATE
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" BOARDCONFIG
 make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
 %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
@@ -94,6 +95,7 @@ done
 %endif
 
 %install
+export SOURCE_DATE_EPOCH=CHANGE_DATE
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot