From dc7797478604d41d2f002f885cd2a8cd3d22fd19 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Thu, 26 Apr 2018 13:30:32 +0200 Subject: [PATCH] tools: zynqmpbif: Add support for load=after Some times it's handy to have a partition loaded immediately after the end of the previous blob. The most obvious example for this is a U-Boot binary (coming from .elf) and a device tree file. This patch adds that logic. With this, the following bif snippet does what you would expect: [destination_cpu=a5x-0, exception_level=el-2] u-boot.elf [load=after] u-boot.dtb converts to FSBL payload on CPU a5x-0 (PS): Offset : 0x00590500 Size : 577768 (0x8d0e8) bytes Load : 0x08000000 Attributes : EL2 Checksum : 0xefca2cad FSBL payload on CPU none (PS): Offset : 0x0061d640 Size : 129760 (0x1fae0) bytes Load : 0x0808d0e8 (entry=0x00000000) Attributes : EL3 Checksum : 0xf7dd3d49 Signed-off-by: Alexander Graf --- tools/zynqmpbif.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/tools/zynqmpbif.c b/tools/zynqmpbif.c index 8c47107c7b..591bec8e59 100644 --- a/tools/zynqmpbif.c +++ b/tools/zynqmpbif.c @@ -42,6 +42,7 @@ enum bif_flag { BIF_FLAG_PUF_FILE, BIF_FLAG_AARCH32, BIF_FLAG_PART_OWNER_UBOOT, + BIF_FLAG_LOAD_AFTER, /* Internal flags */ BIF_FLAG_BIT_FILE, @@ -151,6 +152,11 @@ static char *parse_load(char *line, struct bif_entry *bf) { char *endptr; + if (!strncmp(line, "after", strlen("after"))) { + bf->flags |= (1ULL << BIF_FLAG_LOAD_AFTER); + return line + strlen("after"); + } + bf->load = strtoll(line, &endptr, 0); return endptr; @@ -345,6 +351,15 @@ static int bif_add_part(struct bif_entry *bf, const char *data, size_t len) if (r) return r; + if (bf->flags & (1ULL << BIF_FLAG_LOAD_AFTER) && + bif_output.last_part) { + struct partition_header *p = bif_output.last_part; + uint64_t load = le64_to_cpu(p->load_address); + + load += le32_to_cpu(p->len) * 4; + parthdr.load_address = cpu_to_le64(load); + } + parthdr.offset = cpu_to_le32(bf->offset / 4); if (bf->flags & (1ULL << BIF_FLAG_BOOTLOADER)) {