u-boot/u-boot-mvebudb-88f3720.spec
Guillaume GARDET 31045129c4 Accepting request 607419 from hardware👢staging
- Conditionalize pine64plus ATF support on uboot_atf_pine64
- u-boot-board.spec.in: Update license
- Add poplar
- Update to 2018.05
- Update to 2018.05-rc3
- Include u-boot.spec in autogeneration logic
- Add support for .bif generation in mkimage
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.05
* Patches added:
  0006-tools-zynqmpimage-Add-partition-rea.patch
  0007-tools-zynqmpimage-Move-defines-to-h.patch
  0008-MAINTAINERS-Declare-tools-zynq-.-c-.patch
  0009-tools-zynqmpimage-Add-bif-support.patch
  0010-tools-zynqmpbif-Add-support-for-loa.patch
- Add generic ZynqMP support
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.05
* Patches added:
  0005-zynqmp-Add-generic-target.patch
- Update to 2018.05-rc2
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.05
* Patches dropped:
  0004-rpi3-Enable-lan78xx-driver.patch
  0005-rpi-Add-identifier-for-the-new-RPi3.patch
  0006-efi_loader-Fix-network-DP-with-DM_E.patch
  0007-mkimage-do-not-fail-if-there-is-no-.patch
  0008-rpi-Allow-to-boot-without-serial.patch
  0009-mmc-use-core-clock-frequency-in-bcm.patch
  0010-Temp-workaround-for-Chromebook-snow.patch
* Patches added:
  0004-Temp-workaround-for-Chromebook-snow.patch
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.05
* Patches added:
  0010-Temp-workaround-for-Chromebook-snow.patch
  
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.05
* Patches dropped:
  0009-rpi-Allow-to-boot-without-serial.patch
  0010-mmc-use-core-clock-frequency-in-bcm.patch
* Patches added:
  0008-rpi-Allow-to-boot-without-serial.patch
  0009-mmc-use-core-clock-frequency-in-bcm.patch
    
- Update to 2018.05-rc1
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.05
* Patches dropped:
  0003-Revert-rockchip-mkimage-remove-plac.patch
  0004-rpi-Use-firmware-provided-device-tr.patch
  0005-rpi3-Enable-lan78xx-driver.patch
  0006-net-Only-access-network-devices-aft.patch
  0007-rpi-Add-identifier-for-the-new-RPi3.patch
  0008-efi_loader-Fix-network-DP-with-DM_E.patch
* Patches added:
  0003-rpi-Use-firmware-provided-device-tr.patch
  0004-rpi3-Enable-lan78xx-driver.patch
  0005-rpi-Add-identifier-for-the-new-RPi3.patch
  0006-efi_loader-Fix-network-DP-with-DM_E.patch
  0007-mkimage-do-not-fail-if-there-is-no-.patch

OBS-URL: https://build.opensuse.org/request/show/607419
OBS-URL: https://build.opensuse.org/package/show/hardware:boot/u-boot?expand=0&rev=16
2018-05-15 09:14:56 +00:00

239 lines
8.4 KiB
RPMSpec

#
# spec file for package u-boot-mvebudb-88f3720
#
# Copyright (c) 2018 SUSE LINUX GmbH, Nuernberg, Germany.
# Copyright (c) 2010 Texas Instruments Inc by Nishanth Menon
# Copyright (c) 2007-2010 by Silvan Calarco <silvan.calarco@mambasoft.it>
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
%bcond_with uboot_atf_pine64
%define mvebu_spl 0
%define x_loader 0
%define rockchip_spl 0
%define sunxi_spl 0
%define arndale_spl 0
%define origen_spl 0
%define imx6_spl 0
%define socfpga_spl 0
%if "mvebudb-88f3720" == "rpi" || "mvebudb-88f3720" == "rpi2" || "mvebudb-88f3720" == "rpi332b" || "mvebudb-88f3720" == "rpi3"
%define is_rpi 1
%endif
# archive_version differs from version for RC version only
%define archive_version 2018.05
Name: u-boot-mvebudb-88f3720
Version: 2018.05
Release: 0
Summary: The U-Boot firmware for the mvebudb-88f3720 platform
License: GPL-2.0-only
Group: System/Boot
Url: http://www.denx.de/wiki/U-Boot
Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2
Source1: ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2.sig
Source2: arndale-bl1.img
Source3: update_git.sh
Source300: u-boot-rpmlintrc
Patch0001: 0001-XXX-openSUSE-XXX-Load-dtb-from-part.patch
Patch0002: 0002-Revert-Revert-omap3-Use-raw-SPL-by-.patch
Patch0003: 0003-rpi-Use-firmware-provided-device-tr.patch
Patch0004: 0004-Temp-workaround-for-Chromebook-snow.patch
Patch0005: 0005-zynqmp-Add-generic-target.patch
Patch0006: 0006-tools-zynqmpimage-Add-partition-rea.patch
Patch0007: 0007-tools-zynqmpimage-Move-defines-to-h.patch
Patch0008: 0008-MAINTAINERS-Declare-tools-zynq-.-c-.patch
Patch0009: 0009-tools-zynqmpimage-Add-bif-support.patch
Patch0010: 0010-tools-zynqmpbif-Add-support-for-loa.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build
%if "%{name}" == "u-boot-pine64plus" && %{with uboot_atf_pine64}
BuildRequires: arm-trusted-firmware-pine64
%endif
BuildRequires: bc
# Arndale board needs DTC >= 1.4
BuildRequires: dtc >= 1.4.0
# u-boot-clearfog (tools/kwbimage.c) needs openssl to build
BuildRequires: libopenssl-devel
BuildRequires: python-devel
BuildRequires: swig
%if "%{name}" == "u-boot-qemu-ppce500"
# Owns /usr/share/qemu directory
BuildRequires: qemu
Provides: qemu-ppc:%{_datadir}/qemu/u-boot.e500
%endif
%if "%{name}" == "u-boot-zynqmp"
BuildRequires: zynqmp-dts
%endif
%if 0%{?is_rpi}
# Owns /boot/vc directory
BuildRequires: raspberrypi-firmware
# For mountpoint
Requires(post): util-linux
%endif
Provides: u-boot-loader
Conflicts: otherproviders(u-boot-loader)
%if %x_loader == 1
Obsoletes: x-loader-mvebudb-88f3720
Provides: x-loader-mvebudb-88f3720
%endif
ExclusiveArch: aarch64
%description
Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors.
This package contains the firmware for the mvebudb-88f3720 platform.
%package doc
Summary: Documentation for the U-Boot Firmware
Group: Documentation/Other
%description doc
Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors.
This package contains documentation for U-Boot firmware.
%prep
%setup -q -n u-boot-%{archive_version}
%patch0001 -p1
%patch0002 -p1
%patch0003 -p1
%patch0004 -p1
%patch0005 -p1
%patch0006 -p1
%patch0007 -p1
%patch0008 -p1
%patch0009 -p1
%patch0010 -p1
%build
export SOURCE_DATE_EPOCH=$(date -d "$(head -n 2 %{_sourcedir}/%{name}.changes | tail -n 1 | cut -d- -f1 )" +%s)
%if "%{name}" == "u-boot-pine64plus"
export BL31=/boot/bl31.bin
%endif
make %{?_smp_mflags} CROSS_COMPILE= HOSTCFLAGS="$RPM_OPT_FLAGS" mvebu_db-88f3720_defconfig
echo "Attempting to enable fdt apply command (.dtbo) support."
echo "CONFIG_OF_LIBFDT_OVERLAY=y" >> .config
make %{?_smp_mflags} CROSS_COMPILE= HOSTCFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
%ifarch aarch64
%if %sunxi_spl == 1
cat spl/sunxi-spl.bin u-boot.itb > u-boot-sunxi-with-spl.bin
%endif
%endif
%if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
# Chromebook ARM (snow) and HP Chromebook 11 (spring) need a uImage format
export TEXT_START=$(awk '$NF == "_start" { printf "0x"$1 }' System.map)
./tools/mkimage -A arm -O linux -T kernel -C none -a $TEXT_START -e $TEXT_START -n uboot -d u-boot-dtb.bin u-boot.img
%endif
%if %rockchip_spl == 1
for t in ; do
./tools/mkimage -n -d spl/u-boot-spl.bin -T $t u-boot-spl.$t
done
%endif
%install
export SOURCE_DATE_EPOCH=$(date -d "$(head -n 2 %{_sourcedir}/%{name}.changes | tail -n 1 | cut -d- -f1 )" +%s)
export NO_BRP_STRIP_DEBUG=true
export NO_DEBUGINFO_STRIP_DEBUG=true
%define uboot_dir /boot
%if 0%{?is_rpi}
%define uboot_dir /boot/vc
%endif
%if "%{name}" == "u-boot-qemu-ppce500"
%define uboot_dir %{_datadir}/qemu
%endif
%if "%{name}" == "u-boot-jetson-tk1"
# tegra-uboot-flasher needs several intermediate files, under their original name.
for f in u-boot u-boot.dtb u-boot-dtb-tegra.bin u-boot-nodtb-tegra.bin spl/u-boot-spl; do
install -D -m 0644 $f %{buildroot}%{uboot_dir}/$f
done
%else
%if "%{name}" == "u-boot-p2371-2180"
# Jetson TX1 Driver Pack flash.sh needs several intermediate files, under their original name.
for f in u-boot u-boot.bin u-boot.dtb u-boot-dtb.bin; do
install -D -m 0644 $f %{buildroot}%{uboot_dir}/$f
done
%else
install -D -m 0644 u-boot.bin %{buildroot}%{uboot_dir}/u-boot.bin
%if "%{name}" == "u-boot-qemu-ppce500"
mv %{buildroot}%{uboot_dir}/u-boot.bin %{buildroot}%{uboot_dir}/u-boot.e500
%endif
%endif
%endif
%if %x_loader == 1
install -D -m 0644 MLO %{buildroot}%{uboot_dir}/MLO
%endif
%if %origen_spl == 1
install -D -m 0644 spl/origen-spl.bin %{buildroot}%{uboot_dir}/origen-spl.bin
%endif
%if %arndale_spl == 1
install -D -m 0644 spl/arndale-spl.bin %{buildroot}%{uboot_dir}/arndale-spl.bin
install -D -m 0644 %{SOURCE2} %{buildroot}%{uboot_dir}/arndale-bl1.img
%endif
%if %mvebu_spl == 1
install -D -m 0644 u-boot-spl.kwb %{buildroot}%{uboot_dir}/u-boot-spl.kwb
%endif
%if %rockchip_spl == 1
install -D -m 0644 spl/u-boot-spl.bin %{buildroot}%{uboot_dir}/u-boot-spl.bin
for t in ; do
install -D -m 0644 u-boot-spl.$t %{buildroot}%{uboot_dir}/u-boot-spl.$t
done
%endif
%if %sunxi_spl == 1
install -D -m 0644 spl/sunxi-spl.bin %{buildroot}%{uboot_dir}/sunxi-spl.bin
install -D -m 0644 u-boot-sunxi-with-spl.bin %{buildroot}%{uboot_dir}/u-boot-sunxi-with-spl.bin
%endif
%if %imx6_spl == 1
install -D -m 0644 SPL %{buildroot}%{uboot_dir}/imx6-spl.bin
%endif
%if %socfpga_spl == 1
install -D -m 0644 u-boot-with-spl.sfp %{buildroot}%{uboot_dir}/u-boot-with-spl.sfp
%endif
%if 0%{?is_rpi}
%post
# On the Raspberry Pi we chain-load u-boot.bin from bootcode.bin via config.txt.
# It needs to be on the first FAT partition, wherever we mounted it.
# a) Unmounted, then do nothing.
# b) Mounted as /boot/vc, then they're in the right place already.
# c) Mounted as /boot/efi, with /boot/vc as symlink, then nothing to be done.
# d) Mounted as /boot/efi, with /boot/vc a directory, then copy files over.
if mountpoint -q /boot/efi; then
[[ "$(readlink -f /boot/efi)" -ef "$(readlink -f %{uboot_dir})" ]] || cp %{uboot_dir}/u-boot.bin /boot/efi/
fi
%endif
%files
%defattr(-,root,root)
%{uboot_dir}/*
%doc Licenses/gpl-2.0.txt README
%files doc
%defattr(-,root,root)
# Generic documents
%doc doc/README.JFFS2 doc/README.JFFS2_NAND doc/README.commands
%doc doc/README.autoboot doc/README.commands doc/README.console doc/README.dns
%doc doc/README.hwconfig doc/README.nand doc/README.NetConsole doc/README.serial_multi
%doc doc/README.SNTP doc/README.standalone doc/README.update doc/README.usb
%doc doc/README.video doc/README.VLAN doc/README.silent doc/README.POST
# Copy some useful kermit scripts as well
%doc tools/kermit/dot.kermrc tools/kermit/flash_param tools/kermit/send_cmd tools/kermit/send_image
# Now any h/w dependent Documentation
%doc doc/README.ARM-memory-map
%changelog