u-boot/u-boot-udooneo.changes

1791 lines
63 KiB
Plaintext

-------------------------------------------------------------------
-------------------------------------------------------------------
Thu Mar 15 23:44:18 UTC 2018 - agraf@suse.com
- Add Xilinx ZynqMP ZCU 102 target
-------------------------------------------------------------------
Thu Mar 15 16:34:22 UTC 2018 - agraf@suse.com
- Enable new RPi3 B+ (bsc#1085262)
- Fix network boot (bsc#1070775)
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.03
* Patches added:
0005-rpi3-Enable-lan78xx-driver.patch
0006-net-Only-access-network-devices-aft.patch
0007-rpi-Add-identifier-for-the-new-RPi3.patch
0008-efi_loader-Fix-network-DP-with-DM_E.patch
-------------------------------------------------------------------
Wed Mar 14 15:13:44 UTC 2018 - guillaume.gardet@opensuse.org
- Updated to 2018.03
-------------------------------------------------------------------
Tue Mar 6 13:26:21 UTC 2018 - guillaume@opensuse.org
- Updated to 2018.03-rc4
-------------------------------------------------------------------
Thu Feb 22 08:43:30 UTC 2018 - guillaume@opensuse.org
- Updated to 2018.03-rc3
-------------------------------------------------------------------
Wed Feb 21 16:48:20 UTC 2018 - agraf@suse.com
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.03
* Patches added:
0004-rpi-Use-firmware-provided-device-tr.patch
-------------------------------------------------------------------
Tue Feb 13 12:26:59 UTC 2018 - guillaume@opensuse.org
- Updated to 2018.03-rc2
-------------------------------------------------------------------
Tue Jan 30 07:48:10 UTC 2018 - guillaume@opensuse.org
- Updated to 2018.03-rc1
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.03
* Patches dropped:
0004-Fix-MMC1-external-SD-slot-on-Samsun.patch (Fixed upstream)
-------------------------------------------------------------------
Wed Jan 17 17:11:04 UTC 2018 - afaerber@suse.de
- Add turrisomnia
-------------------------------------------------------------------
Wed Jan 17 09:51:41 UTC 2018 - guillaume@opensuse.org
- Updated to 2018.01
-------------------------------------------------------------------
Mon Jan 8 09:02:47 UTC 2018 - guillaume@opensuse.org
- Updated to 2018.01-rc3
-------------------------------------------------------------------
Tue Dec 19 13:59:57 UTC 2017 - guillaume@opensuse.org
- Updated to 2018.01-rc2
-------------------------------------------------------------------
Fri Dec 8 07:50:19 UTC 2017 - guillaume@opensuse.org
- Updated to 2018.01-rc1
- Remove am57xx_evm_nodt since it has been removed upstream
-------------------------------------------------------------------
Sat Nov 25 23:00:31 UTC 2017 - afaerber@suse.de
- Add nanopi_a64
- Update orangepi_pc2 packaging
-------------------------------------------------------------------
Thu Nov 16 12:27:27 UTC 2017 - guillaume@opensuse.org
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2017.11
* Patches added:
0004-Fix-MMC1-external-SD-slot-on-Samsun.patch
-------------------------------------------------------------------
Tue Nov 14 10:10:21 UTC 2017 - guillaume@opensuse.org
- Updated to v2017.11
-------------------------------------------------------------------
Tue Nov 7 09:59:19 UTC 2017 - guillaume@opensuse.org
- Updated to v2017.11-rc4
-------------------------------------------------------------------
Tue Oct 31 10:28:07 UTC 2017 - guillaume@opensuse.org
- Updated to v2017.11-rc3
-------------------------------------------------------------------
Tue Oct 17 07:58:25 UTC 2017 - guillaume@opensuse.org
- Updated to v2017.11-rc2
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2017.11
* Patches dropped:
0004-Fix-boot-on-Beagleboard-xM-by-disab.patch
-------------------------------------------------------------------
Mon Oct 16 18:53:36 UTC 2017 - xxxxxmichl@googlemail.com
- Added Banana Pi M2+ support (u-boot-sinovoipbpim2plus)
-------------------------------------------------------------------
Sun Oct 8 13:17:01 UTC 2017 - afaerber@suse.de
- Add firefly-rk3399 and geekbox
-------------------------------------------------------------------
Sat Oct 7 00:52:52 UTC 2017 - afaerber@suse.de
- Drop obsolete CuBox-i i.MX6 SPL packaging, too
-------------------------------------------------------------------
Fri Oct 6 23:26:14 UTC 2017 - afaerber@suse.de
- Update packaging for Jetson TX1
- Cleanups
* Drop executable bit from SPL
* Consistently use %uboot_dir
* u-boot[-tegra]-dtb.bin is obsolete
* Drop obsolete UDOO-specific i.MX6 SPL packaging
- Package sunxi64 SPL for Pine64
-------------------------------------------------------------------
Mon Oct 2 13:33:40 UTC 2017 - guillaume@opensuse.org
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2017.09
* Patches added:
0004-Fix-boot-on-Beagleboard-xM-by-disab.patch
-------------------------------------------------------------------
Wed Sep 13 15:14:30 UTC 2017 - guillaume@opensuse.org
- Merge and rename packages to follow upstream:
old configs:
mvebu_db-88f7040-nand_defconfig
mvebu_db-88f7040_defconfig
mvebu_db-88f8040_defconfig
merged to new config:
mvebu_db_armada8k_defconfig
-------------------------------------------------------------------
Tue Sep 12 08:26:24 UTC 2017 - guillaume@opensuse.org
- Updated to v2017.09
-------------------------------------------------------------------
Tue Sep 5 09:22:47 UTC 2017 - guillaume@opensuse.org
- Updated to v2017.09-rc4
-------------------------------------------------------------------
Mon Aug 21 14:46:36 UTC 2017 - guillaume@opensuse.org
- Updated to v2017.07
-------------------------------------------------------------------
Mon Jul 10 12:54:03 UTC 2017 - guillaume@opensuse.org
- Updated to v2017.07-rc3
-------------------------------------------------------------------
Thu Jun 22 08:19:18 UTC 2017 - guillaume@opensuse.org
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2017.07
* Patches added:
0003-Revert-rockchip-mkimage-remove-plac.patch
-------------------------------------------------------------------
Wed Jun 21 14:18:06 UTC 2017 - guillaume.gardet@opensuse.org
- Updated to v2017.07-rc2
-------------------------------------------------------------------
Fri Jun 9 14:21:41 UTC 2017 - afaerber@suse.de
- Updated to v2017.07-rc1
-------------------------------------------------------------------
Mon May 8 15:27:50 UTC 2017 - afaerber@suse.de
- Updated to v2017.05
-------------------------------------------------------------------
Tue May 2 16:22:39 UTC 2017 - afaerber@suse.de
- Updated to v2017.05-rc3
* Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2017.05
* Patches dropped (upstreamed):
0003-meson-gxbb-enable-MMC-as-boot-targe.patch
-------------------------------------------------------------------
Fri Apr 21 03:45:10 UTC 2017 - afaerber@suse.de
- Switch firefly-rk3288 and tinker-rk3288 to u-boot.bin
-------------------------------------------------------------------
Thu Apr 20 14:33:20 UTC 2017 - afaerber@suse.de
- Use %_smp_mflags, suggested by jengelh
-------------------------------------------------------------------
Thu Apr 20 01:00:43 UTC 2017 - afaerber@suse.de
- Drop rkimage for tinker-rk3288, it only has Micro SD storage
-------------------------------------------------------------------
Wed Apr 19 20:04:46 UTC 2017 - afaerber@suse.de
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2017.05
* Enable distro boot from MMC for odroid-c2:
0003-meson-gxbb-enable-MMC-as-boot-targe.patch
-------------------------------------------------------------------
Tue Apr 18 16:12:49 UTC 2017 - afaerber@suse.de
- Updated to v2017.05-rc2
* Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2017.05
* Patches dropped (accepted upstream):
0003-Makefile-Fix-linking-with-modern-bi.patch
- Add orangepipc2, nanopineoair
-------------------------------------------------------------------
Thu Apr 13 02:38:36 UTC 2017 - afaerber@suse.de
- Enable overlay support unconditionally
-------------------------------------------------------------------
Tue Apr 11 03:28:45 UTC 2017 - afaerber@suse.de
- Add ls1012afrdmqspi
-------------------------------------------------------------------
Tue Apr 11 01:47:01 UTC 2017 - afaerber@suse.de
- Updated to v2017.05-rc1
* Add .sig file as source
- Add mvebuespressobin-88f3720, mvebumcbin-88f8040 and evb-rk3399
- Prepare orangepipc2 and nanopineoair for -rc2
-------------------------------------------------------------------
Sun Apr 9 18:24:30 UTC 2017 - afaerber@suse.de
- Add tinker-rk3288
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2017.03
* Fix firefly-rk3288 and tinker-rk3288 build with binutils 2.28.
0003-Makefile-Fix-linking-with-modern-bi.patch
- U-Boot has no CFLAGS, so apply $RPM_OPT_FLAGS to HOSTCFLAGS instead
-------------------------------------------------------------------
Mon Mar 20 11:10:57 UTC 2017 - afaerber@suse.de
- Tidy Raspberry Pi conditionals
- Enable CONFIG_OF_LIBFDT_OVERLAY for Raspberry Pi only for now
-------------------------------------------------------------------
Mon Mar 20 09:43:14 UTC 2017 - afaerber@suse.de
- Add mvebudb-88f{3720,7040,8040}
-------------------------------------------------------------------
Tue Mar 14 08:47:33 UTC 2017 - guillaume@opensuse.org
- Updated to v2017.03
-------------------------------------------------------------------
Wed Mar 1 09:36:39 UTC 2017 - guillaume@opensuse.org
- Add libopenssl-devel as BuildRequires (needed by some configs)
-------------------------------------------------------------------
Tue Feb 28 08:37:55 UTC 2017 - guillaume@opensuse.org
- Updated to v2017.03-rc3
-------------------------------------------------------------------
Wed Feb 22 13:38:25 UTC 2017 - hsehic@suse.com
- Add Lamobo_R1
-------------------------------------------------------------------
Wed Jan 11 09:16:16 UTC 2017 - guillaume@opensuse.org
- Updated to v2017.01
-------------------------------------------------------------------
Mon Jan 9 12:06:53 UTC 2017 - afaerber@suse.de
- Add udooneo
- Introduce IMX6_SPL, superseding per-board CUBOXI_SPL and UDOO_SPL
-------------------------------------------------------------------
Fri Jan 6 14:29:12 UTC 2017 - afaerber@suse.de
- Add nanopineo
- Inline CHANGE_DATE into u-boot.spec.in to keep future diffs small
-------------------------------------------------------------------
Thu Jan 5 10:16:20 UTC 2017 - guillaume@opensuse.org
- Updated to v2017.01-rc3
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2017.01
* Patches dropped:
0002-XXX-openSUSE-XXX-omap3-Move-to-dist.patch
0003-Revert-Revert-omap3-Use-raw-SPL-by-.patch
0004-ARM-bcm283x-Implement-EFI-RTS-reset.patch
0005-bcm2835-video-Map-frame-buffer-as-3.patch
0006-bcm2835-Reserve-the-spin-table-in-e.patch
0007-efi_loader-fix-depends-on-line-of-E.patch
0008-efi-Use-device-device-path-type-Mes.patch
* Patches added:
0002-Revert-Revert-omap3-Use-raw-SPL-by-.patch
-------------------------------------------------------------------
Mon Dec 19 20:50:30 UTC 2016 - xxxxxmichl@googlemail.com
- Added support for DE0-Nanos-SoC board
-------------------------------------------------------------------
Tue Nov 15 10:30:59 UTC 2016 - guillaume@opensuse.org
- Updated to v2016.11
-------------------------------------------------------------------
Wed Nov 2 13:36:32 UTC 2016 - guillaume@opensuse.org
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2016.11
to fix build of Raspberry Pi 1, 2 and 3
-------------------------------------------------------------------
Tue Nov 1 13:10:28 UTC 2016 - guillaume@opensuse.org
- Updated to v2016.11-rc3
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2016.11
* Patches dropped:
0004-efi_loader-Allow-boards-to-implemen.patch
0005-ARM-bcm283x-Implement-EFI-RTS-reset.patch
0006-efi_loader-gop-Expose-fb-when-32bpp.patch
0007-bcm2835-video-Map-frame-buffer-as-3.patch
0008-bcm2835-Reserve-the-spin-table-in-e.patch
0009-x86-Move-table-csum-into-separate-h.patch
0010-x86-Move-smbios-generation-into-arc.patch
0011-efi_loader-Expose-efi_install_confi.patch
0012-smbios-Allow-compilation-on-64bit-s.patch
0013-smbios-Expose-in-efi_loader-as-tabl.patch
0014-efi_loader-Fix-efi_install_configur.patch
0015-smbios-Provide-serial-number.patch
0016-efi_loader-Update-description-of-in.patch
0017-efi_loader-Fix-memory-map-size-chec.patch
0018-efi_loader-Fix-crash-on-32-bit-syst.patch
0019-efi_loader-Move-efi_allocate_pool-i.patch
0020-efi_loader-Track-size-of-pool-alloc.patch
0021-efi_loader-Readd-freed-pages-to-mem.patch
0022-efi_loader-Keep-memory-mapping-sort.patch
0023-efi_loader-Do-not-leak-memory-when-.patch
* Patches added:
0004-ARM-bcm283x-Implement-EFI-RTS-reset.patch
0005-bcm2835-video-Map-frame-buffer-as-3.patch
0006-bcm2835-Reserve-the-spin-table-in-e.patch
0007-efi_loader-fix-depends-on-line-of-E.patch
0008-efi-Use-device-device-path-type-Mes.patch
-------------------------------------------------------------------
Sun Oct 16 16:20:25 UTC 2016 - afaerber@suse.de
- Updated to v2016.11-rc1
-------------------------------------------------------------------
Sat Oct 15 11:25:48 UTC 2016 - agraf@suse.com
- Backport patches to allow 4.8 kernels to boot
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2016.09
* Patches added:
0016-efi_loader-Update-description-of-in.patch
0017-efi_loader-Fix-memory-map-size-chec.patch
0018-efi_loader-Fix-crash-on-32-bit-syst.patch
0019-efi_loader-Move-efi_allocate_pool-i.patch
0020-efi_loader-Track-size-of-pool-alloc.patch
0021-efi_loader-Readd-freed-pages-to-mem.patch
0022-efi_loader-Keep-memory-mapping-sort.patch
0023-efi_loader-Do-not-leak-memory-when-.patch
-------------------------------------------------------------------
Thu Oct 13 13:21:36 UTC 2016 - afaerber@suse.de
- update_git.sh: Handle SUBLEVEL for %archive_version (x.y.Z)
- Switch to branch tumbleweed-2016.09
-------------------------------------------------------------------
Fri Sep 30 20:01:33 UTC 2016 - guillaume@opensuse.org
- Updated to v2016.09
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-staging
* Patches dropped:
0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
0011-serial-bcm283x_mu-Detect-disabled-s.patch
0012-x86-Move-table-csum-into-separate-h.patch
0013-x86-Move-smbios-generation-into-arc.patch
0014-efi_loader-Expose-efi_install_confi.patch
0015-smbios-Allow-compilation-on-64bit-s.patch
0016-smbios-Expose-in-efi_loader-as-tabl.patch
0017-efi_loader-Fix-efi_install_configur.patch
0018-smbios-Provide-serial-number.patch
0019-common-env_nand-Ensure-that-we-have.patch
* Patches added:
0009-x86-Move-table-csum-into-separate-h.patch
0010-x86-Move-smbios-generation-into-arc.patch
0011-efi_loader-Expose-efi_install_confi.patch
0012-smbios-Allow-compilation-on-64bit-s.patch
0013-smbios-Expose-in-efi_loader-as-tabl.patch
0014-efi_loader-Fix-efi_install_configur.patch
0015-smbios-Provide-serial-number.patch
- Add python as BuildRequires (needed by some boards using DTOC
such as firefly-rk3288)
- Fix firefly-rk3288 by replacing u-boot-spl-dtb.bin
by u-boot-spl.bin
- Updated to v2016.09.01
-------------------------------------------------------------------
Wed Sep 28 15:18:17 UTC 2016 - afaerber@suse.de
- Fix rpi332b installation path and enable %post scriplet
-------------------------------------------------------------------
Sun Sep 11 03:44:15 UTC 2016 - afaerber@suse.de
- Add hikey and rpi332b
-------------------------------------------------------------------
Wed Sep 7 09:02:59 UTC 2016 - guillaume@opensuse.org
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
* Patches added:
0019-common-env_nand-Ensure-that-we-have.patch
-------------------------------------------------------------------
Fri Sep 2 23:25:44 UTC 2016 - afaerber@suse.de
- Add post-install script for Raspberry Pi to install to /boot/efi
where needed. (bsc#996064)
-------------------------------------------------------------------
Fri Aug 12 14:07:49 UTC 2016 - agraf@suse.com
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
- Update to v3 of the serial detect code (bsc#989511)
* Patches added:
0010-bcm2835_gpio-Implement-GPIOF_FUNC.patch
* Patches rebased:
0010-serial-bcm283x_mu-Detect-disabled-s.patch -> 0011-serial-bcm283x_mu-Detect-disabled-s.patch
- Add SMBIOS table on ARM (bsc#989509)
* Patches added:
0012-x86-Move-table-csum-into-separate-h.patch
0013-x86-Move-smbios-generation-into-arc.patch
0014-efi_loader-Expose-efi_install_confi.patch
0015-smbios-Allow-compilation-on-64bit-s.patch
0016-smbios-Expose-in-efi_loader-as-tabl.patch
0017-efi_loader-Fix-efi_install_configur.patch
0018-smbios-Provide-serial-number.patch
-------------------------------------------------------------------
Mon Aug 1 18:42:36 UTC 2016 - stefan.bruens@rwth-aachen.de
- Use deterministic build date by setting DATE_SOURCE_EPOCH
-------------------------------------------------------------------
Fri Jul 29 21:52:37 UTC 2016 - agraf@suse.com
- Add dynamic detection of rpi3 uart (bsc#989511)
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
* Patches added:
0010-serial-bcm283x_mu-Detect-disabled-s.patch
-------------------------------------------------------------------
Sat Jul 16 18:49:35 UTC 2016 - afaerber@suse.de
- Updated to v2016.07
* Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
* Patches dropped (upstreamed):
0004-video-ipu-Fix-build-with-hard-float.patch
0005-efi_loader-Clean-up-system-table-on.patch
0006-efi_loader-gop-Don-t-expose-fb-addr.patch
0009-arm-Introduce-setjmp-longjmp.patch
0010-efi_loader-Add-exit-support.patch
0011-efi_loader-Add-DM_VIDEO-support.patch
0015-arm-Fix-setjmp.patch
* Patches rebased:
0007-efi_loader-Allow-boards-to-implemen.patch -> 0004-efi_loader-Allow-boards-to-implemen.patch
0008-ARM-bcm283x-Implement-EFI-RTS-reset.patch -> 0005-ARM-bcm283x-Implement-EFI-RTS-reset.patch
0012-efi_loader-gop-Expose-fb-when-32bpp.patch -> 0006-efi_loader-gop-Expose-fb-when-32bpp.patch
0013-bcm2835-video-Map-frame-buffer-as-3.patch -> 0007-bcm2835-video-Map-frame-buffer-as-3.patch
0014-bcm2835-Reserve-the-spin-table-in-e.patch -> 0008-bcm2835-Reserve-the-spin-table-in-e.patch
- Revert an ARMv8 breakage from v2016.07 (backport from master)
0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch
- Add dragonboard410c, odroid-c2, pine64_plus
-------------------------------------------------------------------
Mon Jun 27 11:00:33 UTC 2016 - nadvornik@suse.com
- Enable SUNXI_SPL for orangepi_pc
-------------------------------------------------------------------
Mon Jun 27 06:14:09 UTC 2016 - agraf@suse.com
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
* Patches added:
0015-arm-Fix-setjmp.patch
- Add update_git.sh to source file list
-------------------------------------------------------------------
Mon Jun 6 22:07:59 UTC 2016 - agraf@suse.com
- Add efifb support for RPi
- Fix spin table spill on Rpi
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
* Patches added:
0011-efi_loader-Add-DM_VIDEO-support.patch
0012-efi_loader-gop-Expose-fb-when-32bpp.patch
0013-bcm2835-video-Map-frame-buffer-as-3.patch
0014-bcm2835-Reserve-the-spin-table-in-e.patch
-------------------------------------------------------------------
Mon Jun 6 06:56:34 UTC 2016 - agraf@suse.com
- Add RTS reboot for RPi
- Add EFI exit support
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
* Patches added:
0007-efi_loader-Allow-boards-to-implemen.patch
0008-ARM-bcm283x-Implement-EFI-RTS-reset.patch
0009-arm-Introduce-setjmp-longjmp.patch
0010-efi_loader-Add-exit-support.patch
-------------------------------------------------------------------
Fri Jun 3 11:18:13 UTC 2016 - agraf@suse.com
- Disable EFI GOP fb_addr, so Linux doesn't use it
- Move to git based patch queue workflow
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
* Patches dropped:
0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
* Patches added:
0001-XXX-openSUSE-XXX-Load-dtb-from-part.patch
0002-XXX-openSUSE-XXX-omap3-Move-to-dist.patch
0003-Revert-Revert-omap3-Use-raw-SPL-by-.patch
0004-video-ipu-Fix-build-with-hard-float.patch
0005-efi_loader-Clean-up-system-table-on.patch
0006-efi_loader-gop-Don-t-expose-fb-addr.patch
-------------------------------------------------------------------
Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
- Fix rpi3 installation location
-------------------------------------------------------------------
Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
to fix build on iMX boards (with hard-float toolchains)
-------------------------------------------------------------------
Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
- Update to 2016.05
- Remove upstreamed patch:
* 0003-exynos-Set-CNTFRQ.patch
-------------------------------------------------------------------
Wed May 4 20:22:57 UTC 2016 - afaerber@suse.de
- Package Marvell SPL for ClearFog
- Tidy package summaries and descriptions
* Fix spelling of U-Boot
* Don't assume ARM
-------------------------------------------------------------------
Thu Apr 28 15:46:09 UTC 2016 - agraf@suse.com
- Update to 2016.05-rc3
- Removed patches:
* 0004-iso-Make-little-endian-and-64bit-safe.patch
* 0005-iso-Start-with-partition-1.patch
* 0006-iso-Allow-512-byte-sector-size.patch
* 0007-efi_loader-Split-drive-add-into-function.patch
* 0008-efi_loader-Add-el-torito-support.patch
* 0009-efi_loader-Pass-file-path-to-payload.patch
* 0010-efi_loader-Increase-path-string-to-32-characters.patch
* 0011-distro-Enable-iso-partition-code.patch
* 0012-efi_loader-Use-system-fdt-as-fallback.patch
* 0013-efi_loader-Put-fdt-into-convenient-location.patch
* 0014-efi_loader-Expose-ascending-efi-memory-map.patch
* 0015-efi_loader-Always-flush-in-cache-line-size-granulari.patch
* 0016-efi_loader-Handle-memory-overflows.patch
* 0017-ARM-rpi-fix-64-bit-CONFIG_SYS_TEXT_BASE.patch
-------------------------------------------------------------------
Fri Apr 15 21:50:37 UTC 2016 - agraf@suse.com
- Add patch to fix RPi3 aarch64 mode with recent firmware
* 0017-ARM-rpi-fix-64-bit-CONFIG_SYS_TEXT_BASE.patch
-------------------------------------------------------------------
Wed Apr 13 13:55:13 UTC 2016 - agraf@suse.com
- Move patch queue to https://github.com/openSUSE/u-boot.git tumbleweed
- Removed old patches:
* 0001-iso-Make-little-endian-and-64bit-safe.patch
* 0002-iso-Start-with-partition-1.patch
* 0003-iso-Allow-512-byte-sector-size.patch
* 0004-efi_loader-Split-drive-add-into-function.patch
* 0005-efi_loader-Add-el-torito-support.patch
* 0006-efi_loader-Pass-file-path-to-payload.patch
* 0007-efi_loader-Increase-path-string-to-32-characters.patch
* 0008-distro-Enable-iso-partition-code.patch
* 0009-efi_loader-Use-system-fdt-as-fallback.patch
* 0010-efi_loader-Put-fdt-into-convenient-location.patch
* 0011-efi_loader-Expose-ascending-efi-memory-map.patch
* 0012-efi_loader-Always-flush-in-cache-line-size-granulari.patch
* u-boot-exynos.patch
* efi-default-env.patch
* omap3-Move-to-distro-bootcmd.patch
- Added new patches:
* 0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
* 0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
* 0003-exynos-Set-CNTFRQ.patch
* 0004-iso-Make-little-endian-and-64bit-safe.patch
* 0005-iso-Start-with-partition-1.patch
* 0006-iso-Allow-512-byte-sector-size.patch
* 0007-efi_loader-Split-drive-add-into-function.patch
* 0008-efi_loader-Add-el-torito-support.patch
* 0009-efi_loader-Pass-file-path-to-payload.patch
* 0010-efi_loader-Increase-path-string-to-32-characters.patch
* 0011-distro-Enable-iso-partition-code.patch
* 0012-efi_loader-Use-system-fdt-as-fallback.patch
* 0013-efi_loader-Put-fdt-into-convenient-location.patch
* 0014-efi_loader-Expose-ascending-efi-memory-map.patch
* 0015-efi_loader-Always-flush-in-cache-line-size-granulari.patch
- Add patch to fix Jetson TK1
* 0016-efi_loader-Handle-memory-overflows.patch
-------------------------------------------------------------------
Wed Apr 13 13:16:42 UTC 2016 - guillaume@opensuse.org
- Use released source archive instead of manually built archive
-------------------------------------------------------------------
Tue Apr 12 08:38:49 UTC 2016 - agraf@suse.com
- Update to 2016.05-rc1
- Remove upstreamed patches:
* efi.patch
* efi2.patch
* efi_loader-Call-fdt-preparation-functions.patch
* efi_loader-Pass-proper-device-path-in-on-boot.patch
* efi_loader-Provide-icache-flush-stub.patch
* efi-map-fdt-as-reserved.patch
* rpi3.patch
- Add EFI fixes and iso boot backports:
* 0001-iso-Make-little-endian-and-64bit-safe.patch
* 0002-iso-Start-with-partition-1.patch
* 0003-iso-Allow-512-byte-sector-size.patch
* 0004-efi_loader-Split-drive-add-into-function.patch
* 0005-efi_loader-Add-el-torito-support.patch
* 0006-efi_loader-Pass-file-path-to-payload.patch
* 0007-efi_loader-Increase-path-string-to-32-characters.patch
* 0008-distro-Enable-iso-partition-code.patch
* 0009-efi_loader-Use-system-fdt-as-fallback.patch
* 0010-efi_loader-Put-fdt-into-convenient-location.patch
* 0011-efi_loader-Expose-ascending-efi-memory-map.patch
* 0012-efi_loader-Always-flush-in-cache-line-size-granulari.patch
-------------------------------------------------------------------
Sun Apr 3 04:40:53 UTC 2016 - afaerber@suse.de
- Package .img for firefly-rk3288
- Package firefly-rk3288 SPL images. Generate them here so that we
notice early if the size constraints are ever again not met.
-------------------------------------------------------------------
Sat Apr 2 23:08:53 UTC 2016 - afaerber@suse.de
- Package spl/u-boot-spl for new tegra-uboot-flasher-scripts
-------------------------------------------------------------------
Fri Apr 1 17:07:55 UTC 2016 - afaerber@suse.de
- Add clearfog
-------------------------------------------------------------------
Tue Mar 15 08:47:35 UTC 2016 - guillaume@opensuse.org
- Update to 2016.03
- Remove upstreamed patch:
* omap3-Use-raw-SPL-by-default-for-mmc1.patch
-------------------------------------------------------------------
Sun Mar 13 21:48:46 UTC 2016 - dmueller@suse.com
- add support for Raspberry Pi 3 (rpi3.patch)
-------------------------------------------------------------------
Wed Mar 9 22:50:22 UTC 2016 - agraf@suse.com
- Fix missing 0-terminator in efi patch, breaking boot.scr boot
-------------------------------------------------------------------
Sat Mar 5 22:02:18 UTC 2016 - afaerber@suse.de
- Non-free licensed Marvell code has long been removed.
Drop obsolete drop-marvell.patch (bsc#773824)
- Fix indentation of Patch6 in u-boot.spec.in
-------------------------------------------------------------------
Thu Mar 3 15:02:37 UTC 2016 - agraf@suse.com
- EFI: Map fdt as reserved
* efi-map-fdt-as-reserved.patch
-------------------------------------------------------------------
Thu Mar 3 12:52:17 UTC 2016 - agraf@suse.com
- Fix OMAP3 boards to load u-boot from raw sector offset
* omap3-Use-raw-SPL-by-default-for-mmc1.patch
-------------------------------------------------------------------
Wed Mar 2 23:46:44 UTC 2016 - agraf@suse.com
- Allow grub2 to find its config
* efi_loader-Pass-proper-device-path-in-on-boot.patch
- Fix Raspberry Pi 1 build
* efi_loader-Provide-icache-flush-stub.patch
-------------------------------------------------------------------
Wed Mar 2 10:03:56 UTC 2016 - guillaume@opensuse.org
- Update to 2016.03-rc3
- Remove upstreamed patches:
* 0001-spl-if-MMCSD_MODE_RAW-fails-try-MMCSD_MODE_FS-if-ava.patch
-------------------------------------------------------------------
Tue Mar 1 23:06:57 UTC 2016 - agraf@suse.com
- Move omap3 to distro bootcmd (to enable efi boot on beagle-xm)
* omap3-Move-to-distro-bootcmd.patch
- Add EFI patch to support FDT fixups (patches in RAM size)
* efi_loader-Call-fdt-preparation-functions.patch
-------------------------------------------------------------------
Mon Feb 29 23:28:15 UTC 2016 - agraf@suse.com
- Patch the default u-boot env to search for dtb in /boot at part 2
* efi-default-env.patch
-------------------------------------------------------------------
Sun Feb 28 11:02:04 UTC 2016 - agraf@suse.com
- Use $fdtfile rather than $fdt_name everywhere:
* efi2.patch
-------------------------------------------------------------------
Sat Feb 27 13:20:29 UTC 2016 - agraf@suse.com
- Add EFI support about to move upstream:
* efi.patch
-------------------------------------------------------------------
Mon Feb 22 13:32:31 UTC 2016 - guillaume@opensuse.org
- Update to 2016.03-rc2
- Remove upstreamed patches:
* U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
* 0001-udoo-use-load-instead-of-fatload.patch
- Refresh drop-marvell.patch
- Remove dropped doc from file list: doc/README.Modem
-------------------------------------------------------------------
Wed Feb 17 08:16:15 UTC 2016 - guillaume@opensuse.org
- Add a patch to fix boot on partition when raw boot mode is also
available:
* 0001-spl-if-MMCSD_MODE_RAW-fails-try-MMCSD_MODE_FS-if-ava.patch
-------------------------------------------------------------------
Wed Feb 17 08:15:52 UTC 2016 - guillaume@opensuse.org
- Add am335x_boneblack
-------------------------------------------------------------------
Sat Feb 13 14:56:43 UTC 2016 - afaerber@suse.de
- Enable Hyundai_A7HD, superseding :Contrib:sunxi package
-------------------------------------------------------------------
Thu Feb 9 13:02:26 UTC 2016 - afaerber@suse.de
- Adjust installation path for qemu-ppce500 to replace qemu-ppc's
* Pull in qemu (not qemu-ppc) for directory ownership
-------------------------------------------------------------------
Tue Feb 9 00:03:18 UTC 2016 - afaerber@suse.de
- Add Jetson TX1 board (p2371-2180)
- Fix indentation of last Patch line in .spec.in to match .spec
-------------------------------------------------------------------
Mon Feb 1 19:35:45 UTC 2016 - agraf@suse.com
- Add patch to fix exynos armv7 kvm support
* adds u-boot-exynos.patch
-------------------------------------------------------------------
Tue Jan 19 14:15:58 UTC 2016 - afaerber@suse.de
- Prepare for non-/boot installation directories
* For /boot/vc pull in raspberrypi-firmware package
-------------------------------------------------------------------
Fri Jan 15 21:19:43 UTC 2016 - oscar@naiandei.net
- Add udoo (dual and quad) boards
* adds 0001-udoo-use-load-instead-of-fatload.patch
-------------------------------------------------------------------
Thu Jan 14 15:43:36 UTC 2016 - afaerber@suse.de
- Add qemu-ppce500, to replace u-boot.e500 blob in qemu package
* Override CROSS_COMPILE variable to use native gcc
-------------------------------------------------------------------
Wed Jan 13 14:07:32 UTC 2016 - guillaume@opensuse.org
- Update to 2016.01
-------------------------------------------------------------------
Mon Jan 11 11:08:50 UTC 2016 - guillaume@opensuse.org
- Update to 2016.01-rc4
-------------------------------------------------------------------
Mon Dec 28 13:50:10 UTC 2015 - guillaume@opensuse.org
- Update to 2016.01-rc3
-------------------------------------------------------------------
Sun Dec 20 20:56:54 UTC 2015 - afaerber@suse.de
- Suppress stripping debug info - it affects u-boot-jetson-tk1
- Install rpi and rpi2 binaries to /boot/vc
-------------------------------------------------------------------
Tue Dec 15 09:27:03 UTC 2015 - guillaume@opensuse.org
- Backport U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
to fix bootdelay on Beaglebone board
-------------------------------------------------------------------
Tue Dec 15 09:15:30 UTC 2015 - guillaume@opensuse.org
- Add orangepi_pc board
-------------------------------------------------------------------
Fri Dec 11 09:23:17 UTC 2015 - guillaume@opensuse.org
- Add support to am57xx_evm (beagle_x15 with u-boot DT)
-------------------------------------------------------------------
Fri Dec 11 09:08:25 UTC 2015 - guillaume@opensuse.org
- Update to 2016.01-rc2:
- Rename 'beagle_x15' to 'am57xx_evm_nodt' to follow upstream
- Remove upstreamed patch:
* U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
-------------------------------------------------------------------
Wed Nov 25 09:38:56 UTC 2015 - guillaume@opensuse.org
- Update to 2016.01-rc1
- Remove upstreamed patches:
* 0001-configs-Use-config_distro_defaults.h-in-ti_armv7_com.patch
* 0001-mx6cuboxi-use-load-instead-of-fatload.patch (no more needed)
* U-Boot-image.c-Fix-non-Android-booting-with-ramdisk-and-or-device-tree.patch
- Update drop-marvell.patch
-------------------------------------------------------------------
Sun Nov 15 13:11:56 UTC 2015 - matwey.kornilov@gmail.com
- Backport 0001-configs-Use-config_distro_defaults.h-in-ti_armv7_com.patch
-------------------------------------------------------------------
Sat Nov 14 15:03:05 UTC 2015 - tbechtold@suse.com
- 0001-mx6cuboxi-use-load-instead-of-fatload.patch
for cubox-i use load instead of fatload
-------------------------------------------------------------------
Tue Nov 3 08:14:57 UTC 2015 - matwey.kornilov@gmail.com
- Fix am335x booting
* U-Boot-image.c-Fix-non-Android-booting-with-ramdisk-and-or-device-tree.patch
-------------------------------------------------------------------
Wed Oct 21 08:16:32 UTC 2015 - guillaume@opensuse.org
- Add Beagle x15 support
- Fix build for Beagle x15:
* U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
-------------------------------------------------------------------
Tue Oct 20 11:32:30 UTC 2015 - guillaume@opensuse.org
- Update to 2015.10
- Remove upstreamed patches:
* 0001-odroid-replace-fatload-with-load-to-be-able-to-use-E.patch
* 0002-odroid-Add-boot-script-boot.scr-support.patch
-------------------------------------------------------------------
Tue Oct 13 06:58:38 UTC 2015 - guillaume@opensuse.org
- Update to 2015.10-rc5
- Remove upstreamed patch:
* arndale-apply-cortex-a15-erratas.patch
-------------------------------------------------------------------
Thu Oct 8 09:27:15 UTC 2015 - guillaume@opensuse.org
- Add boot script support to odroid board:
* 0001-odroid-replace-fatload-with-load-to-be-able-to-use-E.patch
* 0002-odroid-Add-boot-script-boot.scr-support.patch
-------------------------------------------------------------------
Mon Oct 5 18:04:28 UTC 2015 - afaerber@suse.de
- Add spring and firefly-rk3288 for armv7hl
* Break overly long armv7_boards line in pre_checkin.sh
* Clean up case'ing of defconfigs to avoid excessive wildcards
- Prepare for adding qemu-ppce500 for ppc
* Allow for more than two exclusive architectures (cleanup)
-------------------------------------------------------------------
Mon Oct 5 11:42:08 UTC 2015 - dmueller@suse.com
- add arndale-apply-cortex-a15-erratas.patch
-------------------------------------------------------------------
Thu Oct 1 16:41:38 UTC 2015 - guillaume.gardet@opensuse.org
- Update to 2015.10-rc4
- Update drop-marvell.patch
-------------------------------------------------------------------
Sat Sep 12 12:22:53 UTC 2015 - guillaume@opensuse.org
- Use u-boot-2015.10-rc3.tar.bz2 package provided on FTP instead of
packaging it manually.
-------------------------------------------------------------------
Tue Sep 8 08:52:56 UTC 2015 - guillaume@opensuse.org
- Update to 2015.10-rc3
-------------------------------------------------------------------
Wed Sep 2 16:28:02 UTC 2015 - guillaume@opensuse.org
- Add odroid and odroid-xu3
-------------------------------------------------------------------
Tue Aug 18 08:31:48 UTC 2015 - guillaume@opensuse.org
- Update to 2015.10-rc2
- Remove upstreamed patch:
* jetson-tk1-gpu-1.patch
* jetson-tk1-gpu-2.patch
-------------------------------------------------------------------
Thu Aug 6 12:40:58 UTC 2015 - guillaume@opensuse.org
- Update to 2015.10-rc1
- Remove upstreamed patch:
* mx53loco-bootscr.patch
- Update patches:
* jetson-tk1-gpu-1.patch
* jetson-tk1-gpu-2.patch
-------------------------------------------------------------------
Wed Aug 5 13:36:45 UTC 2015 - dmueller@suse.com
- add mx6cuboxi
-------------------------------------------------------------------
Wed Jul 22 22:38:23 UTC 2015 - afaerber@suse.de
- jetson-tk1-gpu-1.patch,
jetson-tk1-gpu-2.patch: Enable the Tegra124 GPU device tree node
-------------------------------------------------------------------
Mon Jul 20 10:45:39 UTC 2015 - afaerber@suse.de
- Add u-boot-jetson-tk1
-------------------------------------------------------------------
Fri Jul 17 06:42:37 UTC 2015 - afaerber@suse.de
- Add u-boot-merriia80optimus
-------------------------------------------------------------------
Wed Jul 15 13:05:24 UTC 2015 - guillaume@opensuse.org
- Update to 2015.07
-------------------------------------------------------------------
Tue Jun 30 07:34:49 UTC 2015 - guillaume@opensuse.org
- Update to 2015.07-rc3
- Remove upstreamed patches:
* enable_spl_ext_support_for_ti_armv7.patch
* fix_slow_mmc_on_rpi.patch
-------------------------------------------------------------------
Thu Jun 18 12:07:10 UTC 2015 - guillaume@opensuse.org
- Add fix_slow_mmc_on_rpi.patch to speed up MMC load on RPi
- Rework patches (to be upstreamable):
* enable_spl_ext_support_for_ti_armv7.patch
* mx53loco-bootscr.patch
- Remove fix_beagle_spl_build.patch
-------------------------------------------------------------------
Wed Jun 10 10:07:23 UTC 2015 - guillaume@opensuse.org
- Update to 2015.07-rc2
- Update drop-marvell.patch
-------------------------------------------------------------------
Wed May 27 10:07:49 UTC 2015 - guillaume@opensuse.org
- Update to 2015.07-rc1:
- Update drop-marvell.patch
- Remove no more needed add_snow_usb_boot.patch
-------------------------------------------------------------------
Wed Apr 29 07:51:25 UTC 2015 - dmueller@suse.com
- adjust copyright headers
-------------------------------------------------------------------
Thu Apr 16 08:34:11 UTC 2015 - guillaume@opensuse.org
- update to 2015.04
- Remove upstreamed patch:
0001-Exynos-Clock-Fix-exynos5_get_periph_rate-for-I2C.patch
- Follow upstream board rename colibri_t20_iris => colibri_t20
-------------------------------------------------------------------
Sun Apr 12 19:49:41 UTC 2015 - xxxxxmichl@googlemail.com
- Added support for A13-OLinuXino, A13-OLinuXino-MICRO,
A20-OLinuXino-MICRO and A20-OLinuXino-LIME from
www.olimex.com
-------------------------------------------------------------------
Thu Apr 9 07:56:40 UTC 2015 - guillaume@opensuse.org
- Remove u-boot-vexpressaemv8a (dropped upstream and we now use EFI)
-------------------------------------------------------------------
Thu Apr 2 09:13:49 UTC 2015 - guillaume@opensuse.org
- update to 2015.04-rc5
-------------------------------------------------------------------
Mon Mar 23 08:39:40 UTC 2015 - guillaume@opensuse.org
- update to 2015.04-rc4
-------------------------------------------------------------------
Wed Mar 4 15:51:55 UTC 2015 - guillaume@opensuse.org
- Add 0001-Exynos-Clock-Fix-exynos5_get_periph_rate-for-I2C.patch
to fix keyboard on Chromebook
-------------------------------------------------------------------
Wed Mar 4 15:46:52 UTC 2015 - guillaume@opensuse.org
- update to 2015.04-rc3
- update patch: drop-marvell.patch
-------------------------------------------------------------------
Thu Feb 26 16:48:35 UTC 2015 - guillaume@opensuse.org
- Update add_snow_usb_boot.patch to boot on USB2 instead of USB3
-------------------------------------------------------------------
Wed Feb 25 15:47:07 UTC 2015 - guillaume@opensuse.org
- Remove unneeded fix_snow_config.patch
-------------------------------------------------------------------
Tue Feb 24 09:48:50 UTC 2015 - guillaume@opensuse.org
- Add rpi2 armv7 board
-------------------------------------------------------------------
Fri Feb 20 12:31:38 UTC 2015 - guillaume@opensuse.org
- Update to 2015.04-rc2
-------------------------------------------------------------------
Fri Feb 20 10:04:14 UTC 2015 - guillaume@opensuse.org
- Update to 2015.04-rc1
* Remove upstreamed patch pcm051-bootscr.patch
* Remove no more used patch fix_bootpart_snow_only.patch (now u-boot
scan all known partitions, so no need to set a different boot partition)
-------------------------------------------------------------------
Sun Jan 25 20:20:46 UTC 2015 - matwey.kornilov@gmail.com
- Enable pcm051rev3 for Phytec Wega board
* Add pcm051-bootscr.patch: add bootscript support (upstreamed in 2015.04-rc1)
-------------------------------------------------------------------
Tue Jan 13 14:32:17 UTC 2015 - guillaume@opensuse.org
- Update to 2015.01:
* Drop upstreamed patches:
- 0001-spl-mmc-Fix-raw-boot-mode-related-to-commit.patch
- fix_sata.patch
* Update partially upstreamed mx53loco-bootscr.patch
-------------------------------------------------------------------
Tue Dec 16 11:10:23 UTC 2014 - guillaume@opensuse.org
- Backport SPL MMC raw boot mode fix:
* 0001-spl-mmc-Fix-raw-boot-mode-related-to-commit.patch
-------------------------------------------------------------------
Sat Dec 13 12:12:41 UTC 2014 - xxxxxmichl@googlemail.com
- Added support for A20-OLinuXIno-LIME2 and A10-OLinuXino-LIME from
www.olimex.com
-------------------------------------------------------------------
Tue Dec 9 11:23:41 UTC 2014 - guillaume@opensuse.org
- Rename XLOADER to OMAP_SPL in pre_checkin.sh and u-boot.spec.in
-------------------------------------------------------------------
Tue Dec 9 09:15:27 UTC 2014 - guillaume@opensuse.org
- Update to 2015.01-rc3
* Drop upstreamed/unneeded patches:
- 0001-exynos-Enable-config_distro_defaults.h.patch
- 0002-exynos5-Use-config_distro_bootcmd.h.patch
- boot_mode_fallback.patch
- fix_snow_usb_support
- fix_spl_ext.patch
- fix_arm_hf_toolchain.patch
- origen-ext2.patch
* Update patch:
- fix_snow_config.patch
* Follow upstream: rpi_b config renamed to rpi
-------------------------------------------------------------------
Tue Dec 2 12:41:55 UTC 2014 - guillaume@opensuse.org
- Update snow (chromebook)
* Update patch:
- fix_snow_config.patch patch
* Add patches:
- add_snow_usb_boot.patch to be able to boot from USB0
- fix_bootpart_snow_only.patch to boot on partition #2 (snow only!)
* Backport patches:
- fix_snow_usb_support.patch to fix USB on snow
- 0001-exynos-Enable-config_distro_defaults.h.patch
- 0002-exynos5-Use-config_distro_bootcmd.h.patch
* Drop unneeded/obsolete patches:
- fix_exynos5_text_base.patch
- fix_snow_extra_env_settings.patch
-------------------------------------------------------------------
Sun Nov 30 13:17:33 UTC 2014 - guillaume@opensuse.org
- Add Bananapi initial support
-------------------------------------------------------------------
Tue Nov 25 08:29:14 UTC 2014 - guillaume@opensuse.org
- Update to 2015.01-rc2
- Update patch fix_omap_boot_mode.patch to be upstreamable and
rename it to boot_mode_fallback.patch
- Drop obsolete patch: arndale.patch
- Add patches:
* fix_arm_hf_toolchain.patch: fix build with hard float toolchain
* fix_spl_ext.patch: fix SPL EXT error checks
* fix_sata.patch: fix sata support and fix also mx53loco build
-------------------------------------------------------------------
Wed Nov 19 21:44:17 CET 2014 - guillaume.gardet@opensuse.org
- Fix mx53loco-bootscr.patch
-------------------------------------------------------------------
Mon Nov 17 21:15:50 UTC 2014 - oscar@naiandei.net
- Add u-boot-with-sunxi-spl.bin for sunxi boards
-------------------------------------------------------------------
Mon Nov 17 15:17:56 UTC 2014 - guillaume@opensuse.org
- Make use of RPM_OPT_FLAGS during make
-------------------------------------------------------------------
Sat Nov 15 14:55:06 UTC 2014 - guillaume@opensuse.org
- Fix sunxi boards (use u-boot.img instead of u-boot.bin)
- Remove duplicated default install line
-------------------------------------------------------------------
Tue Nov 11 13:32:36 UTC 2014 - guillaume@opensuse.org
- Update to 2015.01-rc1
- Drop upstreamed patches:
* add_spl_extfs_support.patch
* ti_common_initrd_support.patch
- Refresh patch:
* drop-marvell.patch
- Drop CREDITS file from DOC (dropped upstream)
-------------------------------------------------------------------
Mon Nov 3 10:19:42 UTC 2014 - guillaume@opensuse.org
- Apply fix_omap_boot_mode.patch only for omap3/omap4 boards
-------------------------------------------------------------------
Tue Oct 14 13:22:44 UTC 2014 - guillaume@opensuse.org
- Update to version 2014.10
- Drop upstreamed patch:
* fix_sabrelite_boot.scr.patch
- Refresh patches:
* arndale.patch
* fix_snow_config.patch
* fix_exynos5_text_base.patch
* exynos5-dt.h.patch (renamed fix_snow_extra_env_settings.patch)
-------------------------------------------------------------------
Wed Oct 8 07:52:48 UTC 2014 - guillaume@opensuse.org
- Update to version 2014.10-rc3
- Drop upstreamed patches:
* beagle-bootscr.patch
* panda-bootscr.patch
* am335x_evm-bootscr.patch
- Refresh patches:
* fix_sabrelite_boot.scr.patch
* drop-marvell.patch
* add_spl_extfs_support.patch
- Add a new patch to fix omap3beagle spl build:
* fix_beagle_spl_build.patch
-------------------------------------------------------------------
Mon Sep 8 13:06:52 UTC 2014 - guillaume@opensuse.org
- Drop Hyundai_a7hd and cubox-i boards (now handle in Contrib repos
since it is not upstreamed), so drop related patches:
* v2014.04-sunxi.patch
* cubox-i-v2014.04-port.patch
* cubox-i-enable_raw_rd.patch
-------------------------------------------------------------------
Wed Sep 3 12:02:22 UTC 2014 - guillaume@opensuse.org
- Update to version 2014.10-rc2
- drop upstreamed patch rpi_b-bootscr.patch
- drop fix_spl_build_for_am335x.patch (does build without it)
- Refresh patches:
* drop-marvell.patch
* fix_snow_config.patch
-------------------------------------------------------------------
Thu Aug 21 08:50:10 UTC 2014 - guillaume@opensuse.org
- Update SPL EXT fs support:
* For omap boards (beagle and panda), SPL now looks for u-boot.img
as upstream instead of u-boot.bin
* Remove mlo-ext2.patch to make proper patches in
order to ease upstreaming our EXT fs SPL functions
* Add panda-bootscr.patch to fix panda boot (was included in
mlo-ext2.patch)
* Add fix_omap_boot_mode.patch to fix beagle and panda boot mode
(was included in mlo-ext2.patch)
* Add add_spl_extfs_support.patch to get proper SPL EXT fs functions
* Add enable_spl_ext_support_for_ti_armv7.patch to enable SPL EXT fs
support for TI ARMv7 boards
-------------------------------------------------------------------
Tue Aug 19 17:35:22 UTC 2014 - matwey.kornilov@gmail.com
- Update to version 2014.10-rc1 and update patches
-------------------------------------------------------------------
Thu Jul 31 13:59:00 UTC 2014 - dimstar@opensuse.org
- Rename rpmlintrc to %{name}-rpmlintrc.
Follow the packaging guidelines.
-------------------------------------------------------------------
Sat Jun 14 11:58:43 UTC 2014 - afaerber@suse.de
- add u-boot-cubietruck for Cubietruck (Cubieboard 3)
-------------------------------------------------------------------
Thu Jun 12 18:52:26 UTC 2014 - josua.m@t-online.de
- add u-boot-mx6cubox-i for Cubox-i and Hummingboard
* currently conflicts with mlo-ext2 patch for omap4
so only for cubox-i target mlo-ext2.patch is skipped
and cubox-i patches are applied
* patch source: https://github.com/vorlonofportland/u-boot/
cubox-i-v2014.04-port.patch
cubox-i-enable_raw_rd.patch
-------------------------------------------------------------------
Tue Apr 29 13:41:18 UTC 2014 - guillaume@opensuse.org
- Enhance pre_checkin.sh script to handle arch restrictions
-------------------------------------------------------------------
Tue Apr 29 13:18:48 UTC 2014 - guillaume@opensuse.org
- Fix builds :
* 'tools' target is now 'tools-only'
* kermit scripts moved from 'tools/scripts' to 'tools/kermit/'
* Enhanced pre_checkin.sh script to handle uppercases in config name
* Renamed config from cubieboard to Cubieboard
* Renamed config from cubieboard2 to Cubieboard2
* Renamed config from hyundai_a7hd to Hyundai_A7HD
* Renamed config from mele_a1000 to Mele_A1000
-------------------------------------------------------------------
Tue Apr 29 13:06:57 UTC 2014 - guillaume@opensuse.org
- Add vexpress_aemv8a board
-------------------------------------------------------------------
Tue Apr 29 08:33:48 UTC 2014 - guillaume@opensuse.org
- Update to v2014.04
* Update mlo-ext2.patch
* Update mx53loco-bootscr.patch
* Update origen-ext2.patch
* Dropped v2014.01-sunxi.patch and created
v2014.04-sunxi.patch by diffing u-boot-2014.04 with
u-boot-sunxi.git d9fe0a1e061e2bde6c24a0f7cef4f5023f3bd579
* Update rpi_b-bootscr.patch
* Drop gnuhash.patch (upstreamed)
-------------------------------------------------------------------
Thu Mar 27 14:22:23 UTC 2014 - guillaume@opensuse.org
- add u-boot-mx6qsabrelite (for iMX6 Sabre Lite board)
-------------------------------------------------------------------
Wed Feb 5 15:07:30 UTC 2014 - guillaume@opensuse.org
- add u-boot-snow (for Chromebook ARM)
-------------------------------------------------------------------
Wed Feb 5 14:59:29 UTC 2014 - guillaume@opensuse.org
- Fix boot.scr location for beagle and origen
-------------------------------------------------------------------
Thu Jan 30 14:28:34 UTC 2014 - dmueller@suse.com
- add u-boot-cubieboard2
-------------------------------------------------------------------
Thu Jan 30 06:46:45 UTC 2014 - afaerber@suse.de
- Drop 0006-ARMV7-hardfp-build-fix.patch:
v2014.01 checks if -msoft-float compiles okay, and
U-Boot is soft-float according to Tom Rini
-------------------------------------------------------------------
Tue Jan 28 15:29:14 UTC 2014 - guillaume@opensuse.org
- Disable CONFIG_SPL_OS_BOOT for ti armv7 configs with
fix_spl_build_for_am335x.patch to reduce size of am335x SPL
-------------------------------------------------------------------
Sat Jan 26 22:46:44 UTC 2014 - afaerber@suse.de
- Update to v2014.01
* Manually updated 0006-ARMV7-hardfp-build-fix.patch
* Dropped v2013.10-sunxi.patch and created
v2014.01-sunxi.patch by merging u-boot.git v2014.01 onto
u-boot-sunxi.git e4a0232e173577893604b94fc3af7c047570970b
* Added gnuhash.patch to fix .gnu.hash section handling in ldscripts
* Rebased mlo-ext2.patch:
omap4_common.h CONFIG_SUPPORT_RAW_INITRD hunk is now covered by
ti_common_initrd_support.patch.
am335xevm build is known breaking due to size constraints not
trivially solvable without dropping our patch.
-------------------------------------------------------------------
Sun Jan 26 12:14:10 UTC 2014 - afaerber@suse.de
- Fix regression in packaging u-boot-dtb-tegra.bin:
There is in fact a u-boot-spl.bin SPL being built,
but it is 0xff-padded as u-boot-spl-pad.bin and then
prepended to u-boot.bin and the .dtb.
u-boot-dtb.bin exists independently as just u-boot.bin and .dtb,
so give preference to u-boot-dtb-tegra.bin over u-boot-dtb.bin.
-------------------------------------------------------------------
Mon Jan 20 14:05:13 UTC 2014 - agraf@suse.com
- The "Tegra SPL" is not an SPL but a differently named u-boot.bin
file. Fix up the generation scripts.
-------------------------------------------------------------------
Sun Jan 19 00:09:41 UTC 2014 - afaerber@suse.de
- Include Tegra SPL for Colibri T20
-------------------------------------------------------------------
Wed Jan 8 17:26:10 UTC 2014 - agraf@suse.com
- switch raspberry to ext2
-------------------------------------------------------------------
Wed Jan 8 13:41:32 UTC 2014 - matwey.kornilov@gmail.com
- am335x_evm-bootscr.patch: Search for files in /boot, not in /boot/boot
-------------------------------------------------------------------
Wed Jan 8 02:07:44 UTC 2014 - afaerber@suse.de
- rpi_b-bootscr.patch: Change rpi_b to use boot.scr
-------------------------------------------------------------------
Tue Jan 7 16:01:13 UTC 2014 - dmueller@suse.com
- remove origin flavor
-------------------------------------------------------------------
Mon Jan 6 22:57:05 UTC 2014 - afaerber@suse.de
- Enable paz00 config (Toshiba AC100)
-------------------------------------------------------------------
Mon Jan 6 21:34:03 UTC 2014 - afaerber@suse.de
- Enable colibri_t20_iris config (Toradex Colibri-T20 on Iris)
- Update u-boot.spec.in copyright and fix typo in comment
-------------------------------------------------------------------
Sat Jan 4 01:47:50 UTC 2014 - agraf@suse.com
- prefer u-boot-dtb.bin over u-boot.bin
- simplify files section
-------------------------------------------------------------------
Fri Jan 3 16:54:30 UTC 2014 - dmueller@suse.com
- mlo-ext2.patch: Search for files in /boot, not in /boot/boot
-------------------------------------------------------------------
Mon Dec 30 18:37:50 UTC 2013 - matwey.kornilov@gmail.com
- Add am335x_evm-bootscr.patch: Add bootscr to AM335x
platform based devices
-------------------------------------------------------------------
Tue Dec 17 14:33:52 UTC 2013 - guillaume@opensuse.org
- Remove old unused patches:
* v2013.04-sunxi.patch
* loadaddr-defaults.patch
-------------------------------------------------------------------
Tue Dec 17 14:10:51 UTC 2013 - guillaume@opensuse.org
- Add ti_common_initrd_support.patch to enable initrd support for
AM335x boards
-------------------------------------------------------------------
Tue Dec 17 14:03:50 UTC 2013 - guillaume@opensuse.org
- Add am335x_evm support which includes: Beagle Bone,
Beagle Bone Black, TI AM335x EVM, TI AM335x EVM-SK
-------------------------------------------------------------------
Tue Nov 26 13:46:22 UTC 2013 - guillaume@opensuse.org
- Add Arndale support
-------------------------------------------------------------------
Tue Nov 26 13:05:10 UTC 2013 - guillaume@opensuse.org
- Update v2013.04-sunxi.patch to v2013.10-sunxi.patch
-------------------------------------------------------------------
Mon Nov 25 10:05:48 UTC 2013 - guillaume@opensuse.org
- Remove kerneladdr and ramdiskaddr definition in u-boot patches
(now done in JeOS image with u-boot hooks)
- Update patches to current version:
* 0006-ARMV7-hardfp-build-fix.patch
* beagle-bootscr.patch
* mx53loco-bootscr.patch
* mlo-ext2.patch
- Merge fix_omap4_ext2_boot.patch in mlo-ext2.patch
- Rename exynos-ext2.patch in origen-ext2.patch
-------------------------------------------------------------------
Mon Nov 25 09:57:12 UTC 2013 - guillaume@opensuse.org
- Update to 2013.10
-------------------------------------------------------------------
Fri Nov 22 16:25:36 UTC 2013 - guillaume@opensuse.org
- Fix OMAP4 pandaboard EXT2 boot
-------------------------------------------------------------------
Fri Sep 13 11:31:14 UTC 2013 - guillaume@opensuse.org
- Fix u-boot.bin and boot.scr place since they are now in boot/ folder.
-------------------------------------------------------------------
Wed May 1 20:48:30 UTC 2013 - dmueller@suse.com
- add support for cubieboard, hyundaia7hd, melea1000
-------------------------------------------------------------------
Wed May 1 08:18:26 UTC 2013 - dmueller@suse.com
- update to 2013.04
* no upstream changelog available
- remove dead u-boot-raspberrypi* (actually called rpib now)
- add rpib variant
-------------------------------------------------------------------
Thu Apr 11 17:05:58 UTC 2013 - guillaume.gardet@opensuse.org
- add omap3_beagle to targets
-------------------------------------------------------------------
Thu Apr 11 16:05:41 UTC 2013 - dmueller@suse.com
- remove u8500href subpackage, kernel got dropped
-------------------------------------------------------------------
Sun Apr 7 14:32:20 UTC 2013 - agraf@suse.com
- update to 2013.04rc2
- enable bootz support on all boards
-------------------------------------------------------------------
Wed Mar 20 07:21:06 UTC 2013 - agraf@suse.com
- fix mlo-ext2.patch to actually use the ext4 infrastructure
-------------------------------------------------------------------
Sat Jan 26 10:38:07 UTC 2013 - dmueller@suse.com
- update mlo-ext2.patch:
* use the ext4 driver now since ext2 got removed
-------------------------------------------------------------------
Wed Oct 24 22:33:13 UTC 2012 - agraf@suse.com
- add sdhc-1.patch, sdhc-2.patch, sdhc-3.patch:
* backport upstream sdhc fixes
-------------------------------------------------------------------
Wed Oct 24 01:37:36 CEST 2012 - agraf@suse.de
- update to 2012.10:
- refresh patches 0006-ARMV7-hardfp-build-fix.patch, mlo-ext2.patch,
loadaddr-defaults.patch, mx53loco-bootscr.patch
-------------------------------------------------------------------
Mon Oct 22 12:00:22 UTC 2012 - agraf@suse.com
- fix origen by putting the ramdisk higher
-------------------------------------------------------------------
Mon Aug 6 09:39:54 UTC 2012 - dmueller@suse.com
- remove Marvell sources as they are non-free licensed (bnc#773824)
-------------------------------------------------------------------
Thu Jul 26 18:21:44 UTC 2012 - agraf@suse.com
- fix ext2 support for origen
- add origen-spl.bin for origen
-------------------------------------------------------------------
Thu Jul 26 09:47:31 UTC 2012 - dmueller@suse.com
- merge u-boot-tools
-------------------------------------------------------------------
Wed Jul 25 21:05:08 UTC 2012 - agraf@suse.com
- add ext2 support by default in mx53loco
-------------------------------------------------------------------
Tue Jul 24 21:28:59 UTC 2012 - agraf@suse.com
- add support for mx53loco
-------------------------------------------------------------------
Tue Jul 24 11:25:42 UTC 2012 - dmueller@suse.com
- remove u-boot-omap3beagle
-------------------------------------------------------------------
Mon Jul 23 22:34:04 UTC 2012 - agraf@suse.com
- bump to 2012.04.01
- fixes bug in cmdline parsing
-------------------------------------------------------------------
Mon Jul 23 22:26:47 UTC 2012 - agraf@suse.com
- add calxeda highbank support
-------------------------------------------------------------------
Thu Jul 12 12:51:56 UTC 2012 - agraf@suse.com
- autoload boot.scr on beagle, so we can boot again
-------------------------------------------------------------------
Thu Jul 12 08:12:15 UTC 2012 - agraf@suse.com
- update to upstream u-boot 2012.04
-> gets rid of linaro fork, only mainline now
-> gets us omap3 MLO support, no more need for x-loader
-> potentially fixes voltage issues on omap4
-------------------------------------------------------------------
Thu Jun 14 09:04:53 UTC 2012 - adrian@suse.de
- add SUSE style conflicts to avoid installation of multiple
boot loaders
-------------------------------------------------------------------
Tue Apr 17 11:59:55 UTC 2012 - joop.boonen@opensuse.org
- Included u-boot.spec.in and gen_spec.sh in the spec file
-------------------------------------------------------------------
Mon Feb 6 13:25:09 UTC 2012 - agraf@suse.com
- use ext2 on panda
-------------------------------------------------------------------
Tue Dec 20 02:36:05 UTC 2011 - agraf@suse.com
- use ttyO2 as default console= on OMAP boards
-------------------------------------------------------------------
Mon Dec 19 20:21:21 UTC 2011 - agraf@suse.com
- add u8500_href and origen configs
-------------------------------------------------------------------
Fri Dec 16 16:03:01 UTC 2011 - agraf@suse.com
- fix lint failures
-------------------------------------------------------------------
Fri Dec 16 14:46:53 CET 2011 - agraf@suse.com
- don't install map
-------------------------------------------------------------------
Fri Dec 16 02:16:19 UTC 2011 - agraf@suse.com
- generalize spec file to be able to build for more boards
- add beagle board spec file
- remove boot.scr
-------------------------------------------------------------------
Fri Dec 16 01:15:47 UTC 2011 - agraf@suse.com
- rename to u-boot-omap4panda
-------------------------------------------------------------------
Tue Dec 13 17:24:45 UTC 2011 - dkukawka@suse.de
- new package based on u-boot-omap4panda but use linaro u-boot git
repo (http://git.linaro.org/git/boot/u-boot-linaro-stable.git)
instead of mainline u-boot. This package also contains the MLO
(this package obsoletes the x-loader package)
-------------------------------------------------------------------
Tue Nov 29 22:53:44 UTC 2011 - joop.boonen@opensuse.org
- COPYING CREDITS README are now in the standard package
-------------------------------------------------------------------
Thu Nov 24 21:08:58 UTC 2011 - joop.boonen@opensuse.org
- Corrected the links
-------------------------------------------------------------------
Tue Nov 22 17:47:17 UTC 2011 - joop.boonen@opensuse.org
- Build without u-boot tools as we have a u-boot-tools packages
-------------------------------------------------------------------
Sun Nov 20 17:00:43 UTC 2011 - joop.boonen@opensuse.org
- Cleaned the spec file up the spec file
- The name is the same as the package name
-------------------------------------------------------------------
Sun Nov 13 13:13:39 UTC 2011 - joop.boonen@opensuse.org
- Build u-boot according to http://elinux.org/Panda_How_to_MLO_&_u-boot
- Using .txt config file instead of .scr it's gerated via mkimage
-------------------------------------------------------------------
Wed Nov 09 22:55:09 UTC 2011 - joop.boonen@opensuse.org
- Used scr file based on http://elinux.org definition
- Build u-boot 20111109
- Used the Meego panda u-boot as a base
-------------------------------------------------------------------
Fri Feb 18 00:00:00 UTC 2011 - raghuveer.murthy@ti.com>
- 2010.09-MeeGo
- Fix for u-boot fails to compile on armv7hl, BMC#13140
-------------------------------------------------------------------
Thu Nov 18 00:00:00 UTC 2010 - peter.j.zhu@intel.com>
- 2010.09-MeeGo
- Don't build against i586, BMC#10159
-------------------------------------------------------------------
Tue Oct 10 00:00:00 UTC 2010 - nm@ti.com>
- 2010.09.rc1-MeeGo
- Added option to enable boot.scr generation and copy
-------------------------------------------------------------------
Mon Oct 04 00:00:00 UTC 2010 - nm@ti.com>
- 2010.09.rc1-MeeGo
- Update to 2010.09
-------------------------------------------------------------------
Wed Sep 14 00:00:00 UTC 2010 - nm@ti.com>
- 2010.09.rc1-MeeGo
- Update to 2010.09.rc1
- MeeGo customization
- Enabled PandaBoard, Beagleboard build
-------------------------------------------------------------------
Wed Mar 31 00:00:00 UTC 2010 - silvan.calarco@mambasoft.it>
- 2009.11.1-1mamba
- update to 2009.11.1
-------------------------------------------------------------------
Wed Mar 31 00:00:00 UTC 2010 -