pool/wpa_supplicant
SHA256
4
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
wpa_supplicant/wpa_supplicant.changes
OBS User autobuild 16e956cc5f Accepting request 20144 from hardware 
Copy from hardware/wpa_supplicant based on submit request 20144 from user vbotka

OBS-URL: https://build.opensuse.org/request/show/20144
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/wpa_supplicant?expand=0&rev=26
2009-09-10 10:52:36 +00:00

731 lines
33 KiB
Plaintext
Raw Blame History

-------------------------------------------------------------------
Mon Sep 7 19:41:35 UTC 2009 - claes.backstrom@fsfe.org
- Added rotation of log file with logrotate (bnc#508041)
-------------------------------------------------------------------
Tue May 12 12:28:55 CEST 2009 - dmueller@suse.de
- reenable logfile writing support to make d-bus activation work
again (bnc#502957)
-------------------------------------------------------------------
Tue Apr 7 13:02:49 CEST 2009 - hschaa@suse.de
- Enable ralink driver (bnc#481380)
- Enable nl80211 driver (bnc#485453)
- Rebase all SUSE patches to 0.6.9
- Remove upstreamed patches
- Update to 0.6.9
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* added support for Wi-Fi Protected Setup (WPS)
(wpa_supplicant can now be configured to act as a WPS Enrollee to
enroll credentials for a network using PIN and PBC methods; in
addition, wpa_supplicant can act as a wireless WPS Registrar to
configure an AP); WPS support can be enabled by adding CONFIG_WPS=y
into .config and setting the runtime configuration variables in
wpa_supplicant.conf (see WPS section in the example configuration
file); new wpa_cli commands wps_pin, wps_pbc, and wps_reg are used to
manage WPS negotiation; see README-WPS for more details
* added support for EAP-AKA' (draft-arkko-eap-aka-kdf)
* added support for using driver_test over UDP socket
* fixed PEAPv0 Cryptobinding interoperability issue with Windows Server
2008 NPS; optional cryptobinding is now enabled (again) by default
* fixed PSK editing in wpa_gui
* changed EAP-GPSK to use the IANA assigned EAP method type 51
* added a Windows installer that includes WinPcap and all the needed
DLLs; in addition, it set up the registry automatically so that user
will only need start wpa_gui to get prompted to start the wpasvc
servide and add a new interface if needed through wpa_gui dialog
* updated management frame protection to use IEEE 802.11w/D7.0
* added Milenage SIM/USIM emulator for EAP-SIM/EAP-AKA
(can be used to simulate test SIM/USIM card with a known private key;
enable with CONFIG_SIM_SIMULATOR=y/CONFIG_USIM_SIMULATOR=y in .config
and password="Ki:OPc"/password="Ki:OPc:SQN" in network configuration)
* added a new network configuration option, wpa_ptk_rekey, that can be
used to enforce frequent PTK rekeying, e.g., to mitigate some attacks
against TKIP deficiencies
* added an optional mitigation mechanism for certain attacks against
TKIP by delaying Michael MIC error reports by a random amount of time
between 0 and 60 seconds; this can be enabled with a build option
CONFIG_DELAYED_MIC_ERROR_REPORT=y in .config
* fixed EAP-AKA to use RES Length field in AT_RES as length in bits,
not bytes
* updated OpenSSL code for EAP-FAST to use an updated version of the
session ticket overriding API that was included into the upstream
OpenSSL 0.9.9 tree on 2008-11-15 (no additional OpenSSL patch is
needed with that version anymore)
* updated userspace MLME instructions to match with the current Linux
mac80211 implementation; please also note that this can only be used
with driver_nl80211.c (the old code from driver_wext.c was removed)
* added support (Linux only) for RoboSwitch chipsets (often found in
consumer grade routers); driver interface 'roboswitch'
* fixed canceling of PMKSA caching when using drivers that generate
RSN IE and refuse to drop PMKIDs that wpa_supplicant does not know
about
* added support for SHA-256 as X.509 certificate digest when using the
internal X.509/TLSv1 implementation
* updated management frame protection to use IEEE 802.11w/D6.0
* added support for using SHA256-based stronger key derivation for WPA2
(IEEE 802.11w)
* fixed FT (IEEE 802.11r) authentication after a failed association to
use correct FTIE
* added support for configuring Phase 2 (inner/tunneled) authentication
method with wpa_gui-qt4
* added support for EAP Sequences in EAP-FAST Phase 2
* added support for using TNC with EAP-FAST
* added driver_ps3 for the PS3 Linux wireless driver
* added support for optional cryptobinding with PEAPv0
* fixed the OpenSSL patches (0.9.8g and 0.9.9) for EAP-FAST to
allow fallback to full handshake if server rejects PAC-Opaque
* added fragmentation support for EAP-TNC
* added support for parsing PKCS #8 formatted private keys into the
internal TLS implementation (both PKCS #1 RSA key and PKCS #8
encapsulated RSA key can now be used)
* added option of using faster, but larger, routines in the internal
LibTomMath (for internal TLS implementation) to speed up DH and RSA
calculations (CONFIG_INTERNAL_LIBTOMMATH_FAST=y)
* fixed race condition between disassociation event and group key
handshake to avoid getting stuck in incorrect state [Bug 261]
* fixed opportunistic key caching (proactive_key_caching)
-------------------------------------------------------------------
Sun Mar 1 17:03:04 CET 2009 - coolo@suse.de
- fix compilation with gcc 4.4
-------------------------------------------------------------------
Mon Feb 9 16:06:44 CET 2009 - hschaa@suse.de
- Add wpa_supplicant-respect_no_reply.patch which avoids
D-Bus errors if no reply was requested by the caller
-------------------------------------------------------------------
Wed Jan 28 14:03:42 CET 2009 - hschaa@suse.de
- Avoid unnecessary roaming if the driver (like ipw2100) does not
report signal level. This fixes association problems with ipw2100
(bnc#469779).
-------------------------------------------------------------------
Wed Jan 28 10:45:19 CET 2009 - hschaa@suse.de
- Fix dbus configuration again (bnc#470013, bnc#469530)
-------------------------------------------------------------------
Thu Jan 22 17:24:34 CET 2009 - hschaa@suse.de
- Add fix_dbus_config.patch (bnc#468392)
-------------------------------------------------------------------
Mon Dec 8 15:45:55 CET 2008 - hschaa@suse.de
- Add patch wpa_supplicant-hide_secrets-2.patch to _not_ print
passwords in clear text when started by NM with enabled debug
output
-------------------------------------------------------------------
Mon Nov 10 17:35:43 EET 2008 - tambet@novell.com
- Fix a bug where authentication would always fail using PKCS#11
interface from DBus control interface.
- Add support for PKCS#11 module initialization arguments.
-------------------------------------------------------------------
Mon Oct 13 15:11:54 CEST 2008 - hschaa@gmail.com
- update wpa_supplicant-roaming.patch which enables roaming by
default for some cards
-------------------------------------------------------------------
Thu Oct 9 14:42:36 CEST 2008 - hschaa@suse.de
- add patches wpa_supplicant-dont_report_empty_initial_scan.patch
and wpa_supplicant-restore_scan_request_setting.patch which
speed up the initial association with a network when NM is used
- Add patch wpa_supplicant-fix_set_mode.patch which fixes an
association bug that was triggered when changing the interface
mode
-------------------------------------------------------------------
Mon Sep 29 13:40:18 CEST 2008 - hschaa@suse.de
- add roaming capability (FATE 303806)
-------------------------------------------------------------------
Wed Sep 24 00:59:56 CEST 2008 - ro@suse.de
- drop buildreq for madwifi (dropped package)
-------------------------------------------------------------------
Tue Sep 2 03:05:49 CEST 2008 - ro@suse.de
- update to 0.6.4
* added support for EAP Sequences in EAP-FAST Phase 2
* added support for using TNC with EAP-FAST
* added driver_ps3 for the PS3 Linux wireless driver
* added support for optional cryptobinding with PEAPv0
* fixed the OpenSSL patches (0.9.8g and 0.9.9) for EAP-FAST to
allow fallback to full handshake if server rejects PAC-Opaque
* added fragmentation support for EAP-TNC
* added support for parsing PKCS #8 formatted private keys into the
internal TLS implementation (both PKCS #1 RSA key and PKCS #8
encapsulated RSA key can now be used)
* added option of using faster, but larger, routines in the internal
LibTomMath (for internal TLS implementation) to speed up DH and RSA
calculations (CONFIG_INTERNAL_LIBTOMMATH_FAST=y)
* fixed race condition between disassociation event and group key
handshake to avoid getting stuck in incorrect state [Bug 261]
* fixed opportunistic key caching (proactive_key_caching)
-------------------------------------------------------------------
Mon Aug 4 12:33:10 CEST 2008 - hschaa@suse.de
- Remove patches that are already upstream
- Rebase patches to new version
- Update to 0.6.3
-------------------------------------------------------------------
Mon May 5 09:52:45 CEST 2008 - schwab@suse.de
- Fix mangled error message.
-------------------------------------------------------------------
Mon Mar 17 15:06:14 CET 2008 - hschaa@suse.de
- Fix system bus activation (bnc#371500)
-------------------------------------------------------------------
Tue Mar 11 15:09:29 CET 2008 - hschaa@suse.de
- Remove patches that are upstream already
- Update to version 0.5.10, changes:
* added support for Makefile builds to include debug-log-to-a-file
functionality (CONFIG_DEBUG_FILE=y and -f<path> on command line)
* added network configuration parameter 'frequency' for setting
initial channel for IBSS (adhoc) networks
* fixed EAP-SIM and EAP-AKA message parser to validate attribute
lengths properly to avoid potential crash caused by invalid messages
* added driver_wext workaround for race condition between scanning and
association with drivers that take very long time to scan all
channels (e.g., madwifi with dual-band cards); wpa_supplicant is now
using a longer hardcoded timeout for the scan if the driver supports
notifications for scan completion (SIOCGIWSCAN event); this helps,
e.g., in cases where wpa_supplicant and madwifi driver ended up in
loop where the driver did not even try to associate
* fixed EAP-SIM not to include AT_NONCE_MT and AT_SELECTED_VERSION
attributes in EAP-SIM Start/Response when using fast reauthentication
* fixed problems in getting NDIS events from WMI on Windows 2000
- Changes in 0.5.9:
* fixed an integer overflow issue in the ASN.1 parser used by the
(experimental) internal TLS implementation to avoid a potential
buffer read overflow
* fixed a race condition with -W option (wait for a control interface
monitor before starting) that could have caused the first messages to
be lost
* updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
draft (draft-ietf-emu-eap-gpsk-07.txt)
* added ctrl_iface RECONNECT (wpa_cli reconnect) command
(like reassociate, but only takes effect if already associated)
* fixed a possible race condition between wpa_cli reassociate and
wpa_cli disconnect
* return a non-zero exit code from non-interactive wpa_cli if the
command is not recognized or fails
* fixed 0.5.8 regressions in BSS selection that prevented wildcard SSID
from being used with non-WPA networks and disabled workaround for
ignoring bogus WPA/RSN IE in non-WPA configuration
* fixed OpenSSL TLS wrapper to clear trusted CA list to allow
network blocks to use different trusted CA configurations
* fixed a potential EAP state machine loop when mloving from PSK to EAP
configuration without restarting wpa_supplicant
-------------------------------------------------------------------
Thu Jan 31 13:10:43 CET 2008 - hschaa@suse.de
- Fix madwifi support (b.n.c #342670)
-------------------------------------------------------------------
Tue Dec 18 18:26:27 CET 2007 - jg@suse.de
- Fix two leaks when signalling state and scan results (rh #408141)
-------------------------------------------------------------------
Wed Nov 14 13:36:33 CET 2007 - jg@suse.de
- enable dbus interface
- apply fixes from Dan Williams
- build Qt4 version of wpa_gui
- dropped gcc 4.3 patch for Qt3 wpa_gui
-------------------------------------------------------------------
Mon Nov 12 14:24:33 CET 2007 - ssommer@suse.de
- fix build with gcc 4.3
-------------------------------------------------------------------
Tue Jul 24 16:58:12 CEST 2007 - jg@suse.de
- update to version 0.5.8, changes:
* updated driver_wext.c to build with the current wireless-dev.git
tree and net/d80211 changes
* updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
draft (draft-ietf-emu-eap-gpsk-03.txt)
* fixed 'make install'
* fixed EAP-TTLS implementation not to crash on use of freed memory
if TLS library initialization fails
* fixed EAP-AKA Notification processing to allow Notification to be
processed after AKA Challenge response has been sent
-------------------------------------------------------------------
Mon Mar 19 19:33:34 CET 2007 - jg@suse.de
- adjusted include path for madwifi
-------------------------------------------------------------------
Sat Mar 10 17:44:46 CET 2007 - dmueller@suse.de
- update to 0.5.7 (#253396):
* ChangeLog is under /usr/share/doc/packages/wpa_supplicant/ChangeLog
-------------------------------------------------------------------
Mon Nov 6 16:29:14 CET 2006 - jg@suse.de
- set IW_ENCODE_TEMP flag (needed to use dynamic WEP with airo
driver, bug 185528)
-------------------------------------------------------------------
Fri Oct 6 11:52:37 CEST 2006 - jg@suse.de
- update to 0.4.9:
* fixed EAPOL re-authentication for sessions that used PMKSA
caching
* reject WPA/WPA2 message 3/4 if it does not include any valid
WPA/RSN IE
* driver_wext: added support for WE-21 change to SSID configuration
* driver_wext: fixed privacy configuration for static WEP keys mode
[Bug 140]
* driver_wext: added fallback to use SIOCSIWENCODE for setting
auth_alg if the driver does not support SIOCSIWAUTH
-------------------------------------------------------------------
Fri Mar 24 19:08:20 CET 2006 - jg@suse.de
- fixed static WEP key usage (bug 144268)
-------------------------------------------------------------------
Thu Feb 16 10:04:31 CET 2006 - jg@suse.de
- update to 0.4.8 (bug 151151)
* added support for EAP-FAST key derivation using other ciphers than
RC4-128-SHA for authentication and AES128-SHA for provisioning
* fixed EAP-SIM and EAP-AKA pseudonym and fast re-authentication to
decrypt AT_ENCR_DATA attributes correctly
* added support for configuring CA certificate as DER file and as a
configuration blob
* fixed private key configuration as configuration blob and added
support for using PKCS#12 as a blob
* added support for loading trusted CA certificates from Windows
certificate store: ca_cert="cert_store://<name>", where <name> is
likely CA (Intermediate CA certificates) or ROOT (root certificates)
* fixed TLS library deinitialization after RSN pre-authentication not
to disable TLS library for normal authentication
* fixed PMKSA cache processing not to trigger deauthentication if the
current PMKSA cache entry is replaced with a valid new entry
* fixed PC/SC initialization for ap_scan != 1 modes (this fixes
EAP-SIM and EAP-AKA with real SIM/USIM card when using ap_scan=0 or
ap_scan=2)
* do not try to use USIM APDUs when initializing PC/SC for SIM card
access for a network that has not enabled EAP-AKA
-------------------------------------------------------------------
Sun Feb 5 18:34:21 CET 2006 - ro@suse.de
- removed km_wlan from BuildRequires
-------------------------------------------------------------------
Wed Jan 25 21:42:51 CET 2006 - mls@suse.de
- converted neededforbuild to BuildRequires
-------------------------------------------------------------------
Tue Jan 17 19:32:07 CET 2006 - rml@suse.de
- Add patch (from upstream) fixing bad drivers that NULL out
the SSID and send the wrong length.
-------------------------------------------------------------------
Tue Jan 10 12:27:27 CET 2006 - jg@suse.de
- added AP scan mode selection via control interface (patch
from rml@novell.com)
-------------------------------------------------------------------
Mon Nov 21 12:41:52 CET 2005 - jg@suse.de
- update to 0.4.7, changes (shortened):
* l2_packet_pcap: fixed wired IEEE 802.1X authentication with
libpcap and WinPcap to receive frames sent to PAE group address
* disable EAP state machine when IEEE 802.1X authentication is
not used in order to get rid of bogus "EAP failed" messages
* fixed OpenSSL error reporting to go through all pending errors
to avoid confusing reports of old errors being reported at
later point during handshake
* fixed configuration file updating to not write empty variables
(e.g., proto or key_mgmt) that the file parser would not accept
* fixed ADD_NETWORK ctrl_iface command to use the same default
values for variables as empty network definitions read from
config file would get
* fixed EAP state machine to not discard EAP-Failure messages in
many cases (e.g., during TLS handshake)
* fixed a infinite loop in private key reading if the configured
file cannot be parsed successfully
* driver_madwifi: added support for madwifi-ng
* wpa_gui: do not display password/PSK field contents
* wpa_gui: added CA certificate configuration
* use longer timeout for IEEE 802.11 association to avoid problems
with drivers that may take more than five second to associate
- dropped obsolete madwifi patch
- dropped obsolete copy of wireless.h
- updated config file
- use $RPM_OPT_FLAGS and %jobs
- created subpackage wpa_supplicant-gui containing wpa_gui
-------------------------------------------------------------------
Tue Nov 8 15:22:13 CET 2005 - jg@suse.de
- do not build as root
-------------------------------------------------------------------
Fri Nov 4 18:16:50 CET 2005 - jg@suse.de
- added support for madwifi-ng
- compiling against Wireless Extensions v19
- removed obsolete config option CONFIG_XSUPPLICANT_IFACE
-------------------------------------------------------------------
Fri Oct 28 12:25:59 CEST 2005 - jg@suse.de
- update to 0.4.6, changes (shortened):
* allow fallback to WPA, if mixed WPA+WPA2 networks have mismatch
in RSN IE, but WPA IE would match with wpa_supplicant
configuration
* added support for named configuration blobs in order to avoid
having to use file system for external files (e.g., certificates)
* fixed RSN pre-authentication
* driver_madwifi: set IEEE80211_KEY_GROUP flag for group keys to
make sure the driver configures broadcast decryption correctly
* added ca_path (and ca_path2) configuration variables that can be
used to configure OpenSSL CA path, e.g., /etc/ssl/certs, for
using the system-wide trusted CA list
* added support for starting wpa_supplicant without a configuration
file
* added global control interface that can be optionally used for
adding and removing network interfaces dynamically
* wpa_gui:
- try to save configuration whenever something is modified
- added WEP key configuration
- added possibility to edit the current network configuration
* driver_ndis: fixed driver polling not to increase frequency on
each received EAPOL frame due to incorrectly cancelled timeout
* fixed driver_wext.c to filter wireless events based on ifindex
to avoid interfaces receiving events from other interfaces
* delay sending initial EAPOL-Start couple of seconds to speed
up authentication for the most common case of Authenticator
starting EAP authentication immediately after association
-------------------------------------------------------------------
Thu Oct 13 16:40:44 CEST 2005 - jg@suse.de
- update to 0.4.5, changes (shortened):
* added a workaround for clearing keys with ndiswrapper to allow
roaming from WPA enabled AP to plaintext one
* l2_packet_linux: use socket type SOCK_DGRAM instead of SOCK_RAW
for PF_PACKET in order to prepare for network devices that do
not use Ethernet headers (e.g., network stack with native IEEE
802.11 frames)
* use receipt of EAPOL-Key frame as a lower layer success indication
for EAP state machine to allow recovery from dropped EAP-Success
frame
* driver_wext: add support for WE-19
* added support for multiple configuration backends (CONFIG_BACKEND
option); currently, only 'file' is supported (i.e., the format used
in wpa_supplicant.conf)
* added support for updating configuration ('wpa_cli save_config')
* added GET_NETWORK ctrl_iface command
-------------------------------------------------------------------
Mon Aug 29 15:26:27 CEST 2005 - jg@suse.de
- update to 0.4.4 (bug 112977), changes (shortened):
* replaced OpenSSL patch for EAP-FAST support
(openssl-tls-extensions.patch) with a more generic and correct
patch
* allow non-WPA modes (e.g., IEEE 802.1X with dynamic WEP) to be
used with drivers that do not support WPA
* added support for enabling/disabling networks from the list of
all configured networks
* added support for adding and removing network from the current
configuration
* added support for setting network configuration parameters
through the control interface
* fixed parsing of strings that include both " and # within double
quoted area (e.g., "start"#end")
* removed interface for external EAPOL/EAP supplicant
* fixed build with CONFIG_DNET_PCAP=y on Linux
* l2_packet: moved different implementations into separate files
* added support for using ap_scan=2 mode with multiple network
blocks
* fixed a potential issue in RSN pre-authentication ending up using
freed memory if pre-authentication times out
* added support for querying private key password (EAP-TLS) through
the control interface (wpa_cli/wpa_gui) if one is not included in
the configuration file
* driver_broadcom: fixed couple of memory leaks in scan result
processing
* EAP-PAX is now registered as EAP type 46
* fixed EAP-PAX MAC calculation
* fixed EAP-PAX CK and ICK key derivation
* added support for using password with EAP-PAX
* added support for arbitrary driver interface parameters through the
configuration file with a new driver_param field
* added possibility to override l2_packet module with driver
interface API (new send_eapol handler)
* fixed ctrl_interface_group processing for the case where gid is
entered as a number, not group name
* driver_test: added support for testing hostapd with wpa_supplicant
by using test driver interface without any kernel drivers or
network cards
* added support for EAP-MSCHAPv2 password retries within the same
EAP authentication session
* added support for password changes with EAP-MSCHAPv2
* added support for reading additional certificates from PKCS#12
files and adding them to the certificate chain
* fixed association with IEEE 802.1X (no WPA) when dynamic WEP keys
were used
* display EAP Notification messages to user through control
interface with "CTRL-EVENT-EAP-NOTIFICATION" prefix
* added 'disconnect' command to control interface for setting
wpa_supplicant in state where it will not associate before
'reassociate' command has been used
* added support for getting scan results through control interface
* added support for wired authentication (IEEE 802.1X on wired
Ethernet); driver interface 'wired'
* added support for sending TLS alerts
* added support for 'any' SSID wildcard; if ssid is not configured or
is set to an empty string, any SSID will be accepted for non-WPA AP
* added support for asking PIN (for SIM) from frontends (e.g.,
wpa_cli);
* added support for using external devices (e.g., a smartcard) for
private key operations in EAP-TLS (CONFIG_SMARTCARD=y in .config);
* added experimental support for EAP-PAX
* added monitor mode for wpa_cli
-------------------------------------------------------------------
Mon Jul 11 15:46:53 CEST 2005 - jg@suse.de
- update to 0.3.9, changes:
* modified the EAP workaround that accepts EAP-Success with
incorrect Identifier to be even less strict about verification
in order to interoperate with some authentication servers
* fixed RSN IE in 4-Way Handshake message 2/4 for the case where
Authenticator rejects PMKSA caching attempt and the driver is
not using assoc_info events
* fixed a possible double free in EAP-TTLS fast-reauthentication
when identity or password is entered through control interface
* added -P<pid file> argument for wpa_supplicant to write the
current process id into a file
* driver_madwifi: fixed association in plaintext mode
* driver_madwifi: added preliminary support for compiling against
'BSD' branch of madwifi CVS tree
* added EAP workaround for PEAPv1 session resumption: allow outer,
i.e., not tunneled, EAP-Success to terminate session since; this
can be disabled with eap_workaround=0
* driver_ipw: updated driver structures to match with ipw2200-1.0.4
(note: ipw2100-1.1.0 is likely to require an update to work with
this)
* driver_broadcom: fixed couple of memory leaks in scan result
processing
- removed pidfile patch in favour of the new upstream
implementation
-------------------------------------------------------------------
Mon Mar 21 11:36:26 CET 2005 - jg@suse.de
- creating directory /var/run/wpa_supplicant when needed (bug 74023)
-------------------------------------------------------------------
Mon Feb 14 09:58:59 CET 2005 - jg@suse.de
- update to 0.3.8, changes:
* fixed EAPOL-Key validation to drop packets with invalid Key
Data Length; such frames could have crashed wpa_supplicant due
to buffer overflow
-------------------------------------------------------------------
Mon Feb 7 17:00:37 CET 2005 - jg@suse.de
- update to 0.3.7-pre, changes:
* fixed WPA/RSN IE verification in message 3 of 4-Way Handshake
when using drivers that take care of AP selection (e.g., when
using ap_scan=2)
* fixed reprocessing of pending request after ctrl_iface requests
for identity/password/otp
* fixed ctrl_iface requests for identity/password/otp in Phase 2
of EAP-PEAP and EAP-TTLS
* all drivers using driver_wext: set interface up and select
Managed mode when starting wpa_supplicant; set interface down
when exiting
* renamed driver_ipw2100.c to driver_ipw.c since it now supports
both ipw2100 and ipw2200
* fixed a busy loop introduced in v0.3.5 for scan result
processing when no matching AP is found
* added a workaround for an interoperability issue with a Cisco AP
when using WPA2-PSK
* fixed non-WPA IEEE 802.1X to use the same authentication timeout
as WPA with IEEE 802.1X
* fixed issues with 64-bit CPUs and SHA1 cleanup in previous
version (e.g., segfault when processing EAPOL-Key frames)
* fixed EAP workaround and fast reauthentication configuration for
RSN pre-authentication
* added support for blacklisting APs that fail or timeout
authentication in ap_scan=1 mode so that all APs are tried in
cases where the ones with strongest signal level are failing
authentication
* fixed CA certificate loading after a failed EAP-TLS/PEAP/TTLS
authentication attempt
* added preliminary support for IBSS (ad-hoc) mode configuration
* added optional support for GNU Readline and History Libraries
for wpa_cli (CONFIG_READLINE)
* added couple of workarounds for interoperability issues with a
Cisco AP when using WPA2
* fixed private key loading for cases where passphrase is not set
* improved recovery from PMKID mismatches by requesting full EAP
authentication in case of failed PMKSA caching attempt
* driver_ndis: added support for NDIS NdisMIncidateStatus() events
* driver_ndis: use ADD_WEP/REMOVE_WEP when configuring WEP keys
* added support for driver interfaces to replace the interface
name based on driver/OS specific mapping, e.g., in case of
driver_ndis, this allows the beginning of the adapter
description to be used as the interface name
* driver_ndis: enable radio before starting scanning, disable
radio when exiting
* added KEY_MGMT_802_1X_NO_WPA as a new key_mgmt type so that
driver interface can distinguish plaintext and IEEE 802.1X
(no WPA) authentication
* fixed static WEP key configuration to use broadcast/default type
for all keys
* driver_ndis: added legacy WPA capability detection for non-WPA2
drivers
* added support for setting static WEP keys for IEEE 802.1X
without dynamic WEP keying (eapol_flags=0)
* added support for reading PKCS#12 (PFX) files (as a replacement
for PEM/DER) to get certificate and private key (CONFIG_PKCS12)
* added new ap_scan mode, ap_scan=2, for drivers that take care of
association, but need to be configured with security policy and
SSID, e.g., ndiswrapper and NDIS driver
-------------------------------------------------------------------
Thu Jan 13 12:32:51 CET 2005 - jg@suse.de
- update to 0.2.6, changes:
* added driver interface for Intel ipw2100 driver
* fixed a bug in PMKSA cache processing: skip sending of
EAPOL-Start only if there is a PMKSA cache entry for the
current AP
* fixed error handling for case where reading of scan results
fails: must schedule a new scan or wpa_supplicant will remain
waiting forever
* set pairwise/group cipher suite for non-WPA IEEE 802.1X to
WEP-104 if keys are not configured to be used; this fixes
IEEE 802.1X mode with drivers that use this information to
configure whether Privacy bit can be in Beacon frames
(e.g., ndiswrapper)
* improved downgrade attack detection in IE verification of
msg 3/4: verify both WPA and RSN IEs, if present, not only the
selected one; reject the AP if an RSN IE is found in msg 3/4,
but not in Beacon or Probe Response frame, and RSN is enabled in
wpa_supplicant configuration
* fixed WPA msg 3/4 processing to allow Key Data field contain
other IEs than just one WPA IE
* modified association event handler to set portEnabled = FALSE
before clearing port Valid in order to reset EAP state machine
and avoid problems with new authentication getting ignored because
of state machines ending up in AUTHENTICATED/SUCCESS state based
on old information
- removed obsolete ipw2100 patch
- added wpa_supplicant.fig to filelist
-------------------------------------------------------------------
Fri Oct 22 12:47:44 CEST 2004 - jg@suse.de
- update to 0.2.5, changes:
* wpa_cli: fixed parsing of -p <path> command line argument
* fixed parsing of wep_tx_keyidx
* fixed couple of errors in PCSC handling that could have caused
random-looking errors for EAP-SIM
* PEAPv1: fixed tunneled EAP-Success reply handling to reply with
TLS ACK, not tunneled EAP-Success
* PEAPv1: added support for terminating PEAP authentication on
tunneled EAP-Success message
* PEAPv1: changed phase1 option peaplabel to use default to 0, i.e.,
to the old label for key derivation; previously, the default was 1,
but it looks like most existing PEAPv1 implementations use the old
label which is thus more suitable default option
* changed SSID configuration in driver_wext.c (used by many driver
interfaces) to use ssid_len+1 as the length for SSID since some
Linux drivers expect this
* fixed couple of unaligned reads in scan result parsing to fix WPA
connection on some platforms (e.g., ARM)
- disabled madwifi support on ppc
-------------------------------------------------------------------
Wed Sep 29 00:36:22 CEST 2004 - jg@suse.de
- added support for ipw2100 driver
-------------------------------------------------------------------
Tue Aug 31 16:57:27 CEST 2004 - jg@suse.de
- added support for writing pid-file
-------------------------------------------------------------------
Mon Aug 2 18:52:39 CEST 2004 - jg@suse.de
- fixed build on non-x86 platforms
-------------------------------------------------------------------
Mon Aug 2 17:35:57 CEST 2004 - jg@suse.de
- update to version 0.2.4, important changes:
- support for new EAP authentication methods:
EAP-TTLS/EAP-MD5-Challenge
EAP-TTLS/EAP-GTC
EAP-TTLS/EAP-MSCHAPv2
EAP-TTLS/EAP-TLS
EAP-TTLS/MSCHAPv2
EAP-TTLS/MSCHAP
EAP-TTLS/PAP
EAP-TTLS/CHAP
EAP-PEAP/TLS
EAP-PEAP/GTC
EAP-PEAP/MD5-Challenge
EAP-GTC
EAP-TTLS/EAP-OTP, EAP-PEAPv0/OTP, EAP-PEAPv1/OTP, EAP-OTP
- support for ATMEL AT76C5XXX driver
- support for madwifi driver
- lots of minor changes, see ChangeLog
- added km_wlan to needforbuild (driver source of madwifi is
needed)
-------------------------------------------------------------------
Thu Jun 17 14:40:13 CEST 2004 - jg@suse.de
- Initial package
Reference in New Issue View Git Blame Copy Permalink