#============================================================================
# /etc/sysconfig/xend
#
# Version = 3.0.0
# Date = 2008-01-30
#
# Maintainer(s) = Ron Terry - ron (at) pronetworkconsulting (dot) com
#
# The latest version can be found at:
#
#    http://pronetworkconsulting.com/linux/scripts/network-multinet.html
#
# Description:
#
#  This configuration file is for use with network-multinet version 3
#
#============================================================================

## Path:        System/Virtualization
## Description: 
## Type:        list()
## Default:     ""
## Config:      
#
# Space delimited list of network types, physical/virtual network 
#  devices,mac addresses and IP addresses to create bridges on using 
#  the following format:
#
#  <network type>,<number of network type>,<network device>,<IP address/CIDR NetMask>,<dhcp server status>
#
#  Where:
#        <network type> =            bridge|nat|route|hostonly|nohost|empty
#        <number of network type> =  The network number (0,1,2,etc.) of that type of
#                                    network (i.e. xennat0, xenbr1, xenhost3, etc.)
#        <network device> =          The network interface the bridge will be attached
#                                    to (i.e. eth0, etc.)
#                                    For NAT. Routed, or Hostonly networks this should 
#                                    be "none" because there is no device.  For Bridged or 
#                                    Nohost interfaces this should be a physical 
#                                    interfaces (eth, bond, vlan, etc.) If set to 
#                                    'default' the interface used for the default
#                                    gateway will be used
#        <IP address/CIDR Netmask> = The IP address and Subnet Mask to assign to
#                                    <network device> format= 1.2.3.4/24
#        <dhcp server status> =      dhcp-on|dhcp-off (DHCP server on/off on that net)
#
# Network Definition Examples:
#       bridged  "bridge,0,default,default,dhcp-off"
#                "bridge,1,eth1,default,dhcp-off"
#       nat      "nat,0,none,172.22.0.1/16,dhcp-off"
#       routed   "route,0,none,172.23.0.1/16,dhcp-off"
#       hostonly "hostonly,0,none,172.24.0.1/16,dhcp-off"
#       nohost   "nohost,0,eth1,,"
#       empty    "empty,0,none,none,"
#
# Example: "bridge,0,eth0,default,dhcp-off nat,0,none,172.22.0.1/16,dhcp-off hostonly,0,none,172.23.0.1/16,dhcp-off empty,0,none,none,"
# 
# The above example would create 4 networks the first being a bridged network 
# (xenbr0), the second being a NATed network (xennat0), the third being a host 
#  only network (xenhost0) and the fourth being an empty network (xenempty0)
#
# Used by network-multinet v3.x only
#
NETWORK_LIST="bridge,0,default,default,dhcp-off hostonly,0,none,172.23.0.1/16,dhcp-off"

## Type:        string(eth0,eth1,eth2,eth3)
## Default:     "eth0"
## Config:      
#
# Network interface to use as the external interface for NATed 
#  and Routed networks.
#
# If set to 'default" it will use the same interface used for the 
#  default route
#
NAT_EXTERNAL_INTERFACE="default"

## Type:        string(128-249)
## Default:     "128-249"
## Config:      
#
# IP address range for the dhcp server.  These should be the 
#  beginning and ending addresses from the last octet of the 
#  IP address
#
XEN_DHCP_RANGE="128-249"

## Type:        string(10.0.0.1,10.0.0.2)
## Default:     "gateway"
## Config:      
#
# IP address(es) of DNS servers for the dhcp server to give out.
#  If set to "gateway" then the IP address of the gateway will be
#  set as the DNS server.
#
#  Examples:  "10.0.0.1,10.0.0.2"
#             "gateway"
#
XEN_DHCP_DNS_SERVERS="gateway"

## Type:        boolean
## Default:     "false"
## Config:      
#
# If set to true the xend-relocation script will enable/disable 
#  the vm migration feature of xend..
#
ENABLE_RELOCATION="false"

## Type:        list()
## Default:     "any"
## Config:      
#
# Space delimited list of IP addresses/host names of machines
#  that xen will accept vm migrations from.  If set to 'any' 
#  xen will accept vm migrations from any host 
#
# Example: "10.0.0.1 10.0.0.2"  would allow relocation to/from thos IPs
# Example: "any"                would allow reloaction to/from any host
#
RELOCATION_NODELIST="any"

## Type:        boolean
## Default:     "false"
## Config:      
#
# If set to true the xend-relocation script will attempt to
#  enable/disable vm migration on all relocation nodes listed
#  in the RELOCATION_NODELIST variable.
#
# Note:  Communication with the nodes is done via ssh so
#  pre-distributed ssh keys is recommended.
#
MANAGE_ALL_RELOCATION_NODES="false"

## Type:        integer
## Default:     "8002"
## Config:      
#
# The TCP port used by Xen for VM relocation
#
XEN_RELOCATION_PORT="8002"