## Path:        System/Virtualization
## Description: 
## Type:        list(eth0 eth1 eth2 eth3)
## Default:     "eth0"
## Config:      
#
# Space delimited list of physical network  
#  devices tocreate traditional bridges on
#
NETDEV_LIST="eth0"

## Type:        list(0 1 2 3)
## Default:     ""
## Config:      
#
# Space delimited list of bridge numbers to  
#  create empty bridges on.  
#
EMPTY_BRIDGE_LIST=""

## Type:        string(xenbr)
## Default:     "xenbr"
## Config:      
#
# Name of bridge to create (example: xenbr)
#
BRIDGE_NAME="xenbr"

## Type:        list(veth2,00:16:3E:01:00:02,172.22.0.1/16,nat veth3,00:16:3E:01:00:03,172.23.0.1/16,hostonly)
## Default:     ""
## Config:      
#
# Space delimited list of virtual network devices,mac addresses
#  and IP addresses to create host bridges on using the 
#  following format:
#
#  <virtual network device>,<mac address>,<IP address/CIDR NetMask>,<nat|hostonly|route>
#
HOST_BRIDGE_LIST=""

## Type:        string(eth0)
## Default:     "eth0"
## Config:      
#
# Network interface to use as the external interface for NATed 
#  and Routed networks
#
NAT_EXTIF="eth0"

## Type:        list(10.0.0.1 10.0.0.2)
## Default:     "any"
## Config:      
#
# Space delimited list of IP addresses/host names of machines
#  that xen will accept vm migrations from.  If set to 'any' 
#  xen will accept vm migrations from any host 
#
RELOCATION_NODELIST="any"

## Type:        string(no)
## Default:     "no"
## Config:      
#
# If set to yes the xend-relocation script will attempt to
#  enable/disable vm migration on all relocation nodes.
#
# Note:  Communication with the nodes is done via ssh so
#  pre-distributed ssh keys is recommended.
#
MANAGE_ALL_RELOCATION_NODES="no"

## Type:        string(8002)
## Default:     "8002"
## Config:      
#
# The TCP port used by Xen for VM relocation
#
XEN_RELOCATION_PORT="8002"